WIRELESS DOOR SENSOR INSTALLATION GUIDE
Read instructions carefully before beginning
Please make sure your garage door is closed before you start installation.
The GoGogate product and our wireless door sensors are meant to be used with garage door openers equiped with photo-eye safety sensors (manufactured after 1993). These sensors are normally found at the bottom of your garage door and avoid accidental closing of your garage door if an object or person is on the path of the door.
Step 1: Place your Sensors
WIRELESS DOOR SENSOR
LED LIGHT
FACING
DOWN
Always install your wireless door sensors with the garage doors in a closed position. Put the provided AAA battery into the sensor. A red light will blink if door is open/ closed. Make sure led light is facing down.
EXCLUSIVE FOR GARAGE DOORS
Attach your wireless sensors to your garage door as per drawing below.
TO PREVENT SERIOUS INJURY OR DEATH FROM
MOVING GARAGE DOORS OR GATES:
- DO NOT let children use the GOGOGATE product and app without adult supervision.
- ONLY Operate your GOGOGATE device when you are in clear view of your garage
or gate and you have verified that there are no objects obstructing the operation of
the door. ALWAYS wait for garage door or gate to be completely closed.
- NEVER operate the remote access feature of your GoGoGate without ensuring that
there is an adult physically present in front of the door or gate validating that it is safe
to start the remote operation of your device
1
Open the sensor to include the provided battery.
2
Place the battery as per picture indications.
Note: write down and store in a safe location the 4 digit code located on the front of your sensor.
PLACE THE SENSOR IN THE UPPER PART OF YOUR GARAGE WITH
RED LED LIGHT FACING DOWN. (LEFT OR RIGHT SIDE)
Place the sensors on the upper part of your garage door wall.
Step 2: Programming additional sensors to your GoGogate
If you have previously programmed your GoGoGate with one single wireless door sensor, you also have the option of adding additonal garage doors to your GoGoGate via your REMOTE ACCESS web page.
STEP 01 STEP 02 STEP 03 STEP 04
Press “ Find Gogogate” button while connected to your Wi-Fi to access
GOGOGATE WEB PAGE
Input your default password: admin “
Press the
Configuration”button
Add your wireless sensor ID and type a name for it Press “ Update” button to save changes.
NOTE: After pressing update, your system will reboot for 40 sec. and your doors will show as “open”. You will need to activate each door once or twice to re-sync them.
20 mm
Height
65 mm
Length
Sensor features:
•
•
•
•
Remotely monitor if garage door has been opened or closed
Receive push notifications and alerts remotely on your Smartphone
Easy install tilt sensor with double sided tapes.
Tilt switch broken when garage door opens. Sensor will be blinking red light.
FEATURES
Frequency
Range
Operating Temperature
Battery type
Battery life span
Packaging
Certification
MODEL GS-4T-RE/GGG
433.92 Mhz
50 m or 150 ft (open space)
Between 0º and 40º C
AAA
2 years
Clamshell
CE - FCC
23 mm
Width
Still having issues. No problem.
Download our user manual in our website www.gogogate.com or contact us at: [email protected]
