QSC E18SW Spec sheet

Features

• High output, professional quality sound with

800 W continuous power

• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.

• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers.

• Rugged tour-grade textured paint

• Foam-lined perforated steel grill

• Optional Padded Cover for protection during transportation

• Optional Caster Kit for greater portability

• E18SW includes speaker pole

Specifications

Configuration

Frequency Response (-6 dB)

Frequency Range (-10 dB)

Power Capacity 2 : Continuous/Peak 800 w / 3200 w

Sensitivity

Coverage Angle

98 dB, 1 w @ 1 m

N/A

Output 1 (Peak SPL @ 1m)

Drivers

LF

1 x 18-inch, subwoofer non-powered

37 Hz – 230 Hz

32 Hz – 230 Hz

133 dB

457 mm (1 8 -inch) driver with 76 mm

(3-inch) voice coil

HF

Nominal Impedance

Cross-over

Input Connectors

Enclosure

Net Weight

Shipping Weight

N/A

4 Ω

N/A

2 x NL4 1 x barrier strip

Trapezoidal, plywood, black texture paint finish. Two side mounted handles.

Perforated, powder- coated steel grille with foam lining.

43 kg / 95 lb

48 kg / 106 lb

E18SW

18" Passive Subwoofer

The E18sw is a high-performance passive subwoofer with a single, 800W, 18-inch, aluminum frame woofer. It’s designed to produce crushing low-end for live performance bands and high-energy dance music. A threaded pole socket and speaker pole are provided for sub/satellite use with any of the E Series two-way models. For portable applications it includes attachment points for four optional casters. The subwoofer’s 4-ohm impedance means that a single woofer can be optimally powered by a less expensive amplifier.

Entertainment Venues

House of Worship

Rental/Production

Mobile Performers

E Series Loudspeakers

The E Series is a range of passive loudspeakers offering robust construction, trusted reliability and overall sonic performance beyond expectations. Intended for sound reinforcement in entertainment applications including live performance, DJ and dance music, karaoke and event production, E Series loudspeakers will deliver outstanding results. Building on QSC’s proven “Systems” methodology, the E Series loudspeakers’ performance is further enhanced when paired with QSC’s GXD or PLD amplifiers or with a

QSC TouchMix digital mixer, and taking advantage of the on-board DSP and factory-tuned presets. These presets support a variety of applications including live sound reinforcement

(with and without subwoofers), stage monitoring, dance music and karaoke.

E Series consists of six models constructed of rugged plywood and coated in black, textured paint. Heavy-duty grilles lined with foam provide protection for the woofers and an elegant appearance. E10, E12 and E15 models are equipped with an all metal, dual-angle,

35mm socket that allows the speaker to be mounted vertically on a pole or angled down by 10° to improve audience coverage and reduce rear wall reflections. Multiple mounting options using E Series Yoke or M8 eyebolts are supported. Input connections include dual

NL4 as well as screw terminal receptacles. Additionally, E215 and E218SW models feature ergonomic, aluminum handles to ease portability.

1 With QSC Processing

2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using

IEC60268 noise based on nominal impedance in the cabinet with Xover, full range

30 Hz 12 dB/oct.

Specifications are subject to change with out notice.

E18SW Details

Input Plate

NL4

1+

1 -

2+

2 -

NL4

1+

1 -

2+

2 -

Barrier

Strip

+

-

Block Diagram

LF

E18SW Dimensions

Front Side

23.8"

605 mm

24.2"

616 mm

Top

23.2"

590 mm

Specifications

1675 MacArthur Boulevard, Costa Mesa, CA 92626 | Ph: 800/854-4079 or 714/957-7100 | Fax: 714/754-6174

©2017 QSC, LLC all rights reserved. QSC, the QSC logo and TouchMix are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries.

All other trademarks are the property of their respective owners. Patents may apply or be pending.

E Series Spec Sheet 01/2017 please recycle