Taylor 5849 Timer Instruction manual

5849 Card

8/23/11

4 EVENT

TIMER

WITH

WHITEBOARD

Time up to 4 events at once

Easy to use dry erase board for notes and reminders

4 unique alarm tones

24 hours 59 minutes timer durations

5.750

Uses 2 “AAA” batteries (included) 5849

9.000

Taylor thermometers and timers are the secret to cooking great meals. You can spend a lot on cookware and appliances, but a simple Taylor thermometer or timer brings it all together for great results. Since 1851 Taylor has provided you with accurate and easy to use instruments. When it comes to food safety and accuracy in measurement, itʼs no wonder that Taylor is the tool that chefs trust.

Instructions:

1. Press “EVENT” to select a timing event. A “TIME” icon shows in the active

timer screen.

Press “HR” to set hours. Press “MIN” to set minutes. Hold down the buttons

to advance digits quickly.

3.

“START/STOP”. To stop timer and reset to zero, first pause the timer, then press

“HR” and “MIN” at the same time.

To “START or PAUSE” a timer, you must be in the event

(indicated by the “TIME” icon).

4.

When a time is up, an alarm sounds and the timer counts up. Press “START/STOP”

to turn off the alarm and stop the count up. Press “START/STOP” again to recall

the last set time. Press “HR” and “MIN” at the same time to reset to zero.

6. Each timer will time up to 24 hours and 59 minutes.

Tips:

• When multiple timers are in use, press “EVENT” to switch between timers.

• Each timer will also count up. Press “EVENT” to select a timer and then press

“START/STOP”.

• Press “HR”, “MIN” and “EVENT” at the same to reset all timers to zero.

• If a time is under 1 hour, the timer switches from Hour/Minute to

Minute/Second timing.

(“H” icon = hours, “M” icon = minutes, “S” icon = seconds.)

• Use a dry erase marker only on this unit. Do not use any permanent ink.

Note: There is a static cling label over the digital display and a strip under the battery cover to prevent battery drain during shipping. Please remove both before use.

Taylor cares and is dedicated to the conservation of our natural resources.

Please properly recycle this packaging.

ONE YEAR LIMITED WARRANTY

Taylor warrants this product to be free from defects in material or workmanship, and on return, will repair or replace it at our option, without charge.

Oak Brook, IL 60523 www.taylorusa.com

Made to our exact specifications in China.

©2011 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® is registered trademark and Plan & Prep is a pending trademark of Taylor Precision Products and its affiliated companies. All rights reserved.

CP5849 8.11

0 7 7 7 8 4 0 5 8 4 9 7