IntelliComfort App Users Guide

IntelliComfort App
Users Guide
Users Guide
Table of Contents
1. Icon Description
2 Account Creation and Setup
2. Account Creation and Setup
2.1 Create new app Account
2.2 Login Process / Forgot Password
2.3 Add thermostat to app Account / Rename and Delete
2 4 Connect thermostat to wireless network through the app (iOS ONLY)
2.4 Connect thermostat to wireless network through the app (iOS ONLY)
3. Screens and View Modes
3.1 Dashboard / Flip Tile Screen
3.2 Locations Screen
3 3 Settings Screen
3.3 Settings Screen
3.4 Home Screen
3.5 Swipe Between Zones
3.6 Mobile Device is Offline (Mobile Device is NOT Connected to Wireless Network)
3.7 Thermostat is Offline (Thermostat is NOT Connected to Wireless Network)
3.7 Thermostat is Offline (Thermostat is NOT Connected to Wireless Network)
3.8 Thermostat Faults (App is NOT accessible during a fault condition. All Fault’s must be reset from the Master Thermostat)
1 Icon Description
*Cool Mode Enable/Disable
*Heat Mode Enable/Disable
*Settings Enter settings
(iOS Only)
*Add a new Location
(iOS Only)
*Quick Cool/Heat Enabled (Heat/Cool Mode Must be Enabled from the Homescreen)
*Quick Cool/Heat Disabled
(Heat/Cool Mode Must be Disabled from the Homescreen)
*Quick Cool/Heat Running
*Q
i k C l/H t R
i
(ONLY Quick Heat or Quick Cool can
Run at a time)
*Away Adjust Setpoints under settings
*Up/Down Arrows Increase and
Decrease temperature
*Home Resets to Original Setpoints
*Online Thermostat is connected to a wireless network
*Humidity Animation (Animation Only)
*Offline Thermostat is NOT connected
to a wireless network.
*Fan Animation (Animation Only)
App Creation and Setup 2.1 Create new app Account
Enter: Name, Email Address,
Password, ,
Country
Press SIGNUP tab
Press Accept tab
Press SIGNUP tab (Check Registered Email to Verify Account)
Press
Press LOGIN tab
2.1 Create new app Account
Press Save tab
Enter Email
& Password
& Password Type in
Device ID
from the
Thermostat
Press Login tab
Device
i will appear ll
Enter Device Name (What you want the Location Called)
2.2 Login Process / Forgot Password
Enter Email
& Password
& Password Press Press
LOGIN tab
Press Login tab
Enter Email Address
Select Forgot
Password Press Reset Password
Reset
Token will be located in the reset email
2.3 Add thermostat to app Account
iOS
Press Add symbol
Enter Device Name (What you want the Location Called)
Press Save tab
Type in
Device ID
from the
Thermostat
Android
d d
Enter Device Name (What you want the Location Called))
Press Register new device
Type in
Type
in
Device ID
from the
Thermostat
Press Save tab
2.3 Rename and Delete thermostat to app Account
iOS
Slide Location
to the Left
Select Remove to Select
Remove to
Delete the Location
Select Rename to Change the name of
Change the name of the Location
Android
d d
Hold Location
until popup
Select Rename to Change the name of the Location
the Location
Select Remove to Delete the Location
iOS Only
2.4 Connect thermostat to wireless network through the app
Select Accept
and go to the Settings app
and go to the Settings app
on your Mobile Device
Press SIGNUP tab
Select
Settings app
Settings app
Select the
Wi‐Fi settings
iOS Only
2.4 Connect thermostat to wireless network through the app
Turn Wi‐Fi ON Select the
T‐Stat‐….. network
Select Join
Select your
Wireless
Wireless Network
For Password Restricted Networks
Enter in Password
iOS Only
2.4 Connect thermostat to wireless network through the app
Connection Successful
Select OK
(You can now View the Thermostat)
Press Press
LOGIN tab
Screens and View Modes
3.1 Dashboard / Flip Tile Screen
Non‐Zoning
Non‐Programmable
Non‐Programmable (Flip Tile)
Settings
Location Name
Indoor Indoor
Temperature
Away Cool Set Point
Away Heat Set Point
Quick Cool
Up/Down Arrows
Away/Home
Quick Heat
Programmable
Location Name
Programmable (Flip Tile)
Settings
Indoor Temperature
Cool Set Point
Heat Set Point
Quick Cool
Quick Heat
Away/Home
Override Override
Temperature
Up/Down Up/Down
Arrows
3.1 Dashboard / Flip Tile Screen
Zoning
Non‐Programmable
Non‐Programmable (Flip Tile)
Settings
Location Name
Cool Set Point
Up/Down Arrows
Indoor Temperature
Heat Set Point
Quick Cool
Away/Home
Quick Heat
Programmable
Location Name
Cool Set Point
Heat Set Point
Programmable (Flip Tile)
Settings
Indoor Temperature
Quick Cool
Quick Heat
Away/Home
Override Temperature
Up/Down Arrows
3.1 Miscellaneous Dashboard Screens
Auto Mode Non‐Programmable Sliders
No Mode
Active
Quick Cool
Enabled
Quick Heat
Enabled
Active
Cooling
Active
Heating
Cool
Setpoint
No Mode
Enabled
Heat
Setpoint
3.2 Locations Screen
1 Location
3 Locations Logout
Add New Device
Location 1
((Vacation))
Single Location
Location 2
(Office)
Location 3
(Home)
Home Mode
Home Mode
Thermostat Online
Away Mode
Thermostat Offline
R f h
Refresh app Values
V l
* Pull Down on the Location
Screen to refresh the app
iOS
3.3 Settings Screen
•Temperature
Temperature Threshold Threshold ‐ Set the Maximum Set the Maximum
and Minimum temperature values for temperature alert emails.
•Humidity Threshold ‐ Set the Maximum and Minimum humidity percentage range for humidity alert emails.
•Fault Alerts ‐ Enable or Disable email notifications
for active fault occurrences.
Enable Temperature Emails
Enable Humidity Emails
•Temperature Override – Choose Custom Overrides: Cancel, Next Event, or Hours from Now Overrides (ONLY available in Programmable and
Overrides. (ONLY available in Programmable and Advanced Programmable)
•Away Mode– Set Heat and Cool Away Mode Temperatures.
Example:
Enable Fault Emails
Humidity Settings
Temperature Override Settings
Humidity
S tV l
Set Values
Adjust Away Mode
Save/Cancel
Settings
Humidity
Minimum/Max
App Version
Android
3.3 Settings Screen
•Temperature
Temperature Threshold Threshold ‐ Set the Maximum Set the Maximum
and Minimum temperature values for temperature alert emails.
•Humidity Threshold ‐ Set the Maximum and Minimum humidity percentage range for humidity alert emails.
Enable Temperature Emails
•Fault Alerts ‐ Enable or Disable email notifications
for active fault occurrences.
Enable Humidity Emails
•Temperature Override – Choose Custom Overrides: Cancel, Next Event, or Hours from Now Overrides (ONLY available in Programmable and
Overrides. (ONLY available in Programmable and Advanced Programmable)
Enable Fault Emails
•Away Mode– Set Heat and Cool Away Mode Temperatures.
Example:
Humidity Settings
Temperature Override Settings
H idit
Humidity
Set Values
Humidity
Minimum/Max
OK/Cancel
Settings
Adjust Away Mode
App Version
3.4 Home Screen
Non‐Programmable
Turn Mobile Device to Horizontal View
Indoor Sun/Moon Outdoor
Temperature
TTemperature
t
I
Icon
Zone Name
(Zoning ONLY)
Brand
Humidification Settings
idifi i S i
(Animation Only)
Fan Settings (Animation Only)
Up/Down Arrows
Indoor Humidity
Cool Mode Enabled
Heat Mode Enabled
3.4 Home Screen
Programmable & Advanced Programmable
Turn Mobile Device to Horizontal View
Indoor Sun/Moon Outdoor
T
Temperature
t
Temperature
Icon
Zone Name
(Zoning ONLY)
Brand
Humidification Settings
(Animation Only)
Fan Settings (Animation Only)
Up/Down A
Arrows
Cancel Override
Cool Mode Enabled
Heat Mode Enabled
Indoor Humidity
3.5 Swipe between Zones
Home Screen View
*Swipe screen to the LEFT to view Zones 2‐6
*Swipe screen to the Right to view Zones 1‐5
3.6 Mobile Device is Offline (Mobile Device is NOT Connected to Wireless Network)
No Internet Connection
No Internet Connection
No Internet Connection
No Internet Connection
3.7 Thermostat is Offline (Thermostat is NOT Connected to a Wireless Network)
Thermostat is Offline
Thermostat is Offline
Thermostat
Thermostat Offline
Thermostat Offline
3.8 Thermostat Faults (App is not accessible during a fault condition. All Fault’s must be reset from the Master Thermostat)
Indoor Equipment Fault
(Dashboard View)
Fault Description
(Must be Enabled from the
Installer Side of Thermostat)
Outdoor Equipment Fault
(Dashboard View)
Fault Description
Fault Description
(Must be Enabled from the
Installer Side of Thermostat)
Thermostat Fault
(Dashboard View)
Fault Description
(Must be Enabled
(Must be Enabled from the Installer Side of Thermostat)
Thermostat Fault
(Homescreen View)
IntelliComfort App
Subject to change without notice. Published in U.S.A.
Copyright © 2014 by Johnson Controls, Inc. All rights reserved.
035-23713-001-B-0414
Supersedes: 035-23713-001-A-0314
York International Corp.
5005 York Drive
Norman, OK 73069