advertisement
Issued June 2012 • Index No. EDX/10.11
Big Blue
®
500 X and 600 X
Engine-Driven
Welder/Generator
Quick
Specs
Heavy Industrial Applications
Heavy Construction
Structural Steel
Maintenance and Repair Rigs
Mining Maintenance
Process Piping
Sheet Metal
Processes
Stick (SMAW)
MIG (GMAW)
Flux-Cored (FCAW)
DC TIG (GTAW)
Submerged Arc (SAW)
Stud Welding
Air Carbon Arc (CAC-A)
500 X:
Rated: 8-mm (5/16 in.) carbons
Capable: 9.5-mm (3/8 in.) carbons
600 X:
Rated: 9.5-mm (3/8 in.) carbons
Output Range
500 X CC: DC Stick 55 – 500 A DC/TIG 55 – 500 A
500 X CC/CV: DC Stick 40 – 550 A DC/TIG 15 – 350 A
600 X CC:
MIG/FCAW 14 – 40 V
DC Stick 55 – 600 A DC/TIG 55 – 600 A
600 X CC/CV: DC Stick 40 – 600 A DC/TIG 20 – 425 A
MIG/FCAW 14 – 40 V
Generator Output Rated at 40˚ C (104˚ F)
5500 Watts Peak — 4000 Watts Continuous
Accu-Rated ™ – Not Inflated
Generator Power
The Power of Blue .
®
Designed for fleet owners that demand the ultimate in reliability and performance.
Three-phase rotating field generator efficiently produces smooth DC weld output using 20 – 30 percent less fuel than a rotating armature-type DC generator.
Enclosed robust case design protects internal components from impact and allows air flow to cool and prolong the life of the engine. Also reduces sound levels.
Quick and easy maintenance with single-side access to oil level check, oil fill, oil filter, fuel filter and air cleaner.
Remote toolless oil drain allows oil to be drained without getting under the engine and reduces the chance of oil spillage.
CC/CV Models: The Vault — ultimate
control board reliability. See page 3.
Big Blue 600 X CC shown.
Heavy-duty low-speed industrial
diesel engines are designed, built and proven to operate over 10,000 hours before the first basic overhaul.
Meter maintenance displays
• Fuel gauge
• Hour meter function
• Oil change interval
• High coolant temperature and low oil pressure shutdowns
• Low fuel shutdown — engine shuts down before system runs out of fuel, making restarts easy.
Hot Start ™ provides positive Stick electrode starts making it easy to start all types of electrodes and it also works great for bead tie-ins.
Arc-Drive ™ makes welding easy.
Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out.
Weatherproof Lexan ® nameplate resists cracking and fading, and is color-coded for ease of operation.
GFCI receptacle as required on most jobsites to protect oper ators from electrical hazards.
CSA, IEC and NEMA compliant for
welders. Degree of protection provided by enclosure IP23.
Welder/generator is warranted by Miller for 3 years, parts and labor.
Engine is warranted separately by engine manufacturer.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Website
MillerWelds.com
2
Big Blue
®
500 X and 600 X CC Specifications
(Subject to change without notice.)
Model
Big Blue
500 X CC
Big Blue
600 X CC
Welding
Mode/Process
CC/DC
(Stick/TIG)
CC/DC
(Stick/TIG)
Weld Output
Range
55 – 500 A
55 – 600 A
Weld Output Rated at
40˚ C (104˚ F)
400 A at 36 V (14.4 kW),*
100% Duty Cycle
450 A at 38 V (17.1 kW),*
60% Duty Cycle
500 A at 30 V (15 kW),
40% Duty Cycle
500 A at 40 V (20 kW),*
100% Duty Cycle
550 A at 34 V (18.7 kW),
60% Duty Cycle
600 A at 30 V (18 kW),
40% Duty Cycle
Max. Open-
Circuit Voltage
95
Generator Output
Rated at 40˚ C (104˚ F)
Peak: 5500 watts
Continuous: 4000 watts,
1-phase, 34/17 A,
120/240 VAC, 50/60 Hz while welding
Dimensions**
H: 1092 mm
(43 in.)
W: 724 mm
(28.5 in.)
D: 1654 mm
(65.125 in.)
*Perkins powered models are approved — meet NEMA and IEC output ratings. Deutz powered models meet NEMA and IEC output ratings.
**Additional 178 mm (7 in.) to top of exhaust. ***Additional 86 kg (190 lb.) when fuel tank is full.
Weight
(without fuel)***
Perkins 404D.22:
701 kg (1545 lb.)
Deutz D2011L03i:
751 kg (1655 lb.)
Deutz D2011L04i:
769 kg (1695 lb.)
Deutz D912L03:
810 kg (1785 lb.)
Big Blue
®
500 X and 600 X CC Control Panel
1
2
3
4
5
6
7
8
OFF
RUN/IDLE
RUN
START
9
10
11
12
13
14
15
16
1. DC Ammeter*
2. DC Voltmeter*
3. Amperage Adjust Control
4. Amperage Range Switch
5. Amperage Adjust Switch and
Remote Amperage Adjust Receptacle
6. Stick/TIG Selector Switch
7. Earth Leakage Circuit Breaker
8. 230 VAC, 16 A Pin and Sleeve Receptacle
9. Fuel Gauge/Hour Meter/Oil Change
Interval/Engine Shutdown Indicator
10. Engine Oil Pressure Gauge
11. Battery/Voltmeter*
12. Engine Coolant Temperature Gauge
13. Engine Control Switch
14. Starting Aid Switch
(standard on Perkins model)
15. 120 VAC, 20 A GFCI Duplex Receptacle
16. Polarity Switch*
*Optional.
Additional Features
Proven, rugged rheostat control technology that has been in Miller engine drives for over
60 years. Contains no printed control boards.
A Stick/TIG switch optimizes open-circuit voltage for Stick welding and allows the opencircuit voltage to be lowered for scratch start
TIG welding.
Provisions are provided to plug a RHC3GD34A
remote control that will allow precise adjust ment of amperage without walking back to the machine.
Big Blue
®
500 X and 600 X CC/CV Specifications
(Subject to change without notice.)
Model
Big Blue
500 X CC/CV
Big Blue
600 X CC/CV
Welding
Mode/Process
CC/DC
(Stick/TIG)
CV/DC
(MIG/FCAW)
CC/DC
(Stick/TIG)
CV/DC
(MIG/FCAW)
Weld Output
Range
15 – 500 A
14 – 40 V
20 – 600 A
14 – 40 V
Weld Output Rated at
40˚C (104˚F)
400 A at 36 V (14.4 kW),*
100% Duty Cycle
450 A at 38 V (17.1 kW),*
60% Duty Cycle
500 A at 34 V (17 kW),
40% Duty Cycle
500 A at 40 V (20 kW),*
100% Duty Cycle
550 A at 42 V (23.1 kW),
60% Duty Cycle
600 A at 34 V (20.4 kW),
40% Duty Cycle
Max. Open-
Circuit Voltage
95
Generator Output
Rated at 40˚C (104˚F)
Peak: 5500 watts
Continuous: 4000 watts,
1-phase, 34/17 A,
120/240 VAC, 50/60 Hz while welding
Dimensions**
H: 1092 mm
(43 in.)
W: 724 mm
(28.5 in.)
D: 1654 mm
(65.125 in.)
*Perkins powered models are approved — meet NEMA and IEC output ratings. Deutz powered models meet NEMA and IEC output ratings.
**Additional 178 mm (7 in.) to top of exhaust. ***Additional 86 kg (190 lb.) when fuel tank is full.
Weight
(without fuel)***
Perkins 404D.22:
701 kg (1545 lb.)
Deutz D2011L03i:
751 kg (1655 lb.)
Deutz D2011L04i:
769 kg (1695 lb.)
Deutz D912L03:
810 kg (1785 lb.)
6
Big Blue
®
500 X and 600 X CC/CV Control Panel
1
2
3
4
5
7
8
OFF
RUN/IDLE
RUN
START
9
10
11
12
13
14
15
16
1. DC Ammeter
2. DC Voltmeter
3. Amperage/Voltage Adjust Control
4. Amperage Range Switch
5. Amperage/Voltage Adjust Switch and
Remote Amperage/Voltage Adjust Receptacle
6. Process/Contactor Selector Switch
7. Earth Leakage Circuit Breaker
8. 230 VAC, 16 A Pin and Sleeve Receptacle
9. Fuel Gauge/Hour Meter/Oil Change Interval
Engine Shutdown Indicator
10. Engine Oil Pressure Gauge
11. Battery/Voltmeter*
12. Engine Coolant Temperature Gauge
13. Engine Control Switch
14. Starting Aid Switch
(standard on Perkins model)
15. 120 VAC, 20 A GFCI Duplex Receptacle
16. Polarity Switch*
* Optional.
Additional Features
One MIG welding range allows precise voltage control for welding with 0.6 – 3.2 mm
(.023 –.120 in.) wires.
A multi-colored process selector control allows quick and easy process changes without having to use multiple switches.
14-pin remote control allows precise adjustment of amperage or voltage, along with contactor control, without walking back to the machine.
The Vault — Superior Circuit Board Design
Our critical circuit boards are engineered to carry low power and low heat to reduce thermal stress and minimize expansion and contraction. In contrast, our competitor’s boards carry high power and high heat, them more vulnerable to failure.
“The Vault” Makes Upgrading to Miller ®
CC/CV Units Worry-Free
Concerns with circuit board reliability have resulted in some operators steering clear of
CC/CV welder/generators — even though they offer a superior arc and multiple welding processes. Miller circuit board reliability isn’t a concern since all Big Blue multiprocess industrial engine drives feature the Vault.
Created out of two aluminum halves sealed with silicone, as well as watertight harness connections, the Vault provides a clean circuit board environment, protecting the electronics — and controlling output — in heavy industrial applications. No other competitor protects their electronics with a sealed vault, leaving critical circuit boards exposed to harsh elements that can disrupt the machine’s electronics, and therefore, its operation.
3
4
Big Blue
®
500 X and 600 X CC Performance Data
500 X CC
VOLT/AMP CURVES – STICK MODE
100
600 X CC
VOLT/AMP CURVES – STICK MODE
100
80
80
60
60
40
40
20
20
0
0 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
0
0 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
FUEL CONSUMPTION CURVE
7.57
6.62
5.69
4.73
3.79
600 X
1800 RPM
2.84
500 X
1.90
0.95
600 X IDLE
500 X IDLE
0.00
0 50 100 150 200 250 300 350 400 450 500
DC WELD AMPERES AT 100% DUTY CYCLE
1000
800
600
500
400
300
250
200
150
100
10
DUTY CYCLE CURVE
600 X
500 X
15 20 25 30 40 50 60
% DUTY CYCLE
80 100
Big Blue
®
500 X and 600 X CC/CV Performance Data
500 X CC/CV
VOLT/AMP CURVES – STICK MODE
100
80
80
60
40
20
0
0
60
40
20
0
0 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
500 X CC/CV
VOLT/AMP CURVES – MIG MODE
100
80
60
MAX
40
20
MIN
0
0 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
500 X CC/CV
VOLT/AMP CURVES – TIG MODE
100
100 200 300
DC AMPERES
400 500
600 X CC/CV
VOLT/AMP CURVES – STICK MODE
100
80
60
40
20
0
0 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
600 X CC/CV
VOLT/AMP CURVES – MIG MODE
100
60
40
20
0
0
80
60
40
MAX
20
MIN
0
0 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
600 X CC/CV
VOLT/AMP CURVES – TIG MODE
100
80
100 200 300
DC AMPERES
400 500
GENERATOR POWER CURVE
150 300
125 250
100 200
75 150
50 100
25 50
0 0
0
0
4 kW
5.5 kW
5 10 15 20 25
AC AMPERES IN 240 V MODE
10 20 30 40 50
AC AMPERES IN 120 V MODE
30
60
DUTY CYCLE CURVE
1000
800
600
500
400
300
250
200
150
100
10
600 X
500 X
15 20 25 30 40 50 60
% DUTY CYCLE
80 100
FUEL CONSUMPTION CURVE
7.57
6.62
5.69
4.73
3.79
600 X
1800 RPM
2.84
500 X
1.90
0.95
600 X IDLE
500 X IDLE
0.00
0 50 100 150 200 250 300 350 400 450 500
DC WELD AMPERES AT 100% DUTY CYCLE
Engine Specifications
(Subject to change without notice.)
Model
Big
Blue
500 X
Big
Blue
600 X
Engine
Brand
Perkins
404D.22
Deutz
D2011L03i
Deutz
D2011L04i
Deutz
D912L03
Features
EPA Tier 4i compliant, indirect-injected, liquid-cooled engine with full load sound levels of 73.2 dB @ 7 m (98 Lwa).
Right-side service access with intervals of 500 hours for oil and filters.
EPA Tier 4i compliant, direct-injected, air/oil-cooled engine with full load sound levels of 76.8 dB @ 7 m (101.7 Lwa).
Right-side service access with intervals of 1000 hours for
oil and filters. Approved underground operation with the purchase of a MSHA (30 CFR part 7) certificate.
EPA Tier 4i compliant, direct-injected, air/oil-cooled engine with full load sound levels of 76 dB @ 7 m (101 Lwa).
Right-side service access with intervals of 1000 hours for
oil and filters.
The legendary Tier I, EPA-certified, direct-injected, air-cooled engine with full load sound levels of 81 dB @ 7 m (106 Lwa).
Right-side service access with intervals of 500 hours for oil and filters.
HP
32.6
32.0
48.6
41.5
Type
4-cylinder, industrial, liquid-cooled diesel
3-cylinder, industrial, air/oil-cooled diesel
Engine
Speeds
(RPM)
Weld: 1850
Weld: 1850
Capacities
Fuel: 95 L (25 gal.)
Oil: 8.5 L (9 qt.)
Coolant: 8.5 L (9 qt.)
Fuel: 95 L (25 gal.)
Oil: 5.9 L (6.2 qt.)
Coolant:
Integrated oil
4-cylinder, industrial, air/oil-cooled diesel
3-cylinder, industrial, air-cooled diesel
Weld: 1850
Weld: 1850
Fuel: 95 L (25 gal.)
Oil: 8.5 L (9 qt.)
Coolant:
Integrated oil
Fuel: 95 L (25 gal.)
Oil: 8.5 L (9 qt.)
Coolant: Air
Automatic
Engine
Shutdowns
Low Oil Pressure,
High Coolant
Temperature,
Low Fuel Level
Low Oil Pressure,
High Coolant
Temperature,
Low Fuel Level
Low Oil Pressure,
High Coolant
Temperature,
Low Fuel Level
Low Oil Pressure,
High Coolant
Temperature,
Low Fuel Level
Genuine Miller
®
Options
Weld Ammeter and Voltmeter Kit
#195 131 Field
Panel-mounted analog meters monitor welding output.
Installation time: 35 minutes
Polarity Reversing Switch Kit
#043 942 Field
Changes DC polarity without the use of tools.
Installation time: 35 minutes
AC/DC Polarity Reversing Switch Kit
#195 095 Field
Select AC output or DC polarity without the use of tools.
OFF
RUN/IDLE
RUN
START
Battery Voltmeter
#195 454 Field
Monitors battery-charging circuit.
Cold Weather Starting Aid Kit
Note: Perkins 404D.22 models come standard with glow plugs.
#195 056 Field
Perkins. 120 V block heater.
#195 307 Field
Deutz D2011L03i/ D2011L04i. 12 V intake manifold heater.
#195 086 Field
Deutz D2011L03i/ D2011L04i. 120 V oil pan heater.
5
6
Genuine Miller
®
Accessories
International Plug
#255 416 Field
1-Phase, 240 VAC, 16 A plug
Engine Filter Kits
#246 988 Field. For Deutz D2011
#246 989 Field. For Deutz D912
#246 985 Field. For Perkins 404
Includes all filters required for proper engine maintenance. Oil filter, primary and secondary fuel filter, and primary air filter.
Spark Arrestor
Muffler Kit
#195 012 Field
Prevents particles from leaving the muffler that could potentially start a fire. Mandatory when operating on California grasslands, brush, or forest-covered land, and in all National
Forests. For other areas, check your state and local laws. Meets US Forest Service standard 5100-1B.
FA-1D Lockable Flame Arrestor
Fuel Cap #043 947 Field
Fuel cap can be padlocked to prevent vandalism. A built-in flame arrestor prevents flames or sparks from entering the fuel tank.
Vandalism Lockout Kit
#195 118 Field
Lockable hinged steel panels cover and protect name plate gauges and ignition switch (padlock included). Also includes engine compart ment door lock and key.
Cable Holder
#043 946 Field
Saddle-bag-style cable holder. Convenient wraparound storage of coiled cable for transportation.
Stores 30.5 m of 2/0 cable on each side.
Note: For best results do not weld when cable is coiled!
Protective cover cannot be used with cable holder.
Protective Cover
#194 683 Field
Blue water-resistant canvas cover resists stains and mildew, and protects the finish of your welder.
Note: Protective cover cannot be used with cable holder.
Stick (SMAW) Welding
Weld Leads
2/0 Stick Cable Set, 15 m (50 ft.)
#173 851
Consists of 15-m (50 ft.) 2/0 electrode cable with holder, and 15-m (50 ft.) work cable with clamp. 350 A, 100% duty cycle.
2/0 Stick Cable Set, 30.5/15 m (100/50 ft.)
#043 952
Consists of 30.5-m (100 ft.) 2/0 electrode cable with holder, and 15-m (50 ft.) work cable with clamp. 300 A, 100% duty cycle.
MIG (GMAW) or Flux-Cored (FCAW)
SuitCase ® X-TREME ™ 8VS Wire Feeder
#300 656
SuitCase ® X-TREME ™ 12VS Wire Feeder
#300 659
Lightweight, voltage-sensing wire feeders include secondary contactor and gas valve.
Requires drive roll kit. See Lit. Index No.
M/6.41.
SuitCase ® 8RC Wire Feeder #300 660
SuitCase ® 12RC Wire Feeder #300 663
Lightweight and flexible enough to run a variety of wires up to 1.6-mm diameter.
Includes remote voltage control. Requires drive roll kit. See Lit. Index No. M/6.5.
MIG (GMAW)/Flux-Cored (FCAW) Guns
Miller produces a com plete line of dependable MIG guns. See Lit. Index Nos.
AY/15.0, AY/16.0 and AY/17.0.
Spoolmatic ® 30A
Spool Gun
#130 831
Air-cooled, 200-amp,
0.45-kg spool gun for aluminum MIG. See Lit. Index No. M/1.73.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR ™ Wire Feeders and Guns
Push-pull system designed to handle difficult-to-feed soft alloy wires such as aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
TIG (GTAW) Welding
Dynasty ® 200 Series
For premium portable
AC/DC TIG arc quality.
See Lit. Index No.
AD/4.8.
HF-251 Series
#042 388
HF-251D-1, 115 VAC
#042 387
HF-251D-2, 230 VAC
High-frequency arc starter and stabilizer.
See Accessory Lit. Index No. AY/5.0.
Plasma Cutting
Spectrum 375 X-TREME and 625 X-TREME shown.
Spectrum ® 375 X-TREME ™
See Lit. Index No. PC/9.2.
Spectrum ® 625 X-TREME ™
See Lit. Index No. PC/9.6.
#907 529
#907 531
Spectrum ® 875 #907 390-01-1
See Lit. Index No. PC/9.8.
The Spectrum 375 X-TREME and 625
X-TREME come complete with protective
X-CASE ™ (not shown).
Genuine Miller
®
Accessories
(Continued)
Remote Controls (CC models only)
RHC-3GD34A Remote
Hand Control #041 122
Allows for precise adjustment of amperage.
Includes 6-m
(20-ft.) cord.
RFCS-14 HD Foot
Control #194 744
Heavy-duty foot control for remote current, voltage and contactor control.
Includes 6-m (20 ft.) cord and 14-pin plug.
Remote Controls (CC/CV models)
RHC-14 Hand Control
#242 211 020
Miniature hand control for remote current, voltage and contactor control. Dimensions:
102 x 102 x 82 mm (4 x 4 x 3.25 in.).
Includes 6-m (20 ft.) cord and 14-pin plug.
RMLS-14 #129 337
Fingertip momentary- and maintainedcontact rocker switch for contactor control.
Push forward for maintained contact and back for momen tary con tact. Includes 8-m
(26.5 ft.) cord and 14-pin plug.
RCC-14 Remote
Contactor and Current
Control #151 086
Side-to-side rotary-motion fingertip control fastens to TIG torch using two Velcro ® straps. Includes 8-m (26.5 ft.) control cord and 14-pin plug.
RCCS-14 Remote
Contactor and Current
Control #043 688
Up-and-down rotary-motion fingertip control fastens to TIG torch using two Velcro ® straps. Includes 8-m (26.5 ft.) control cord.
Extension Cables for 14-Pin
Remote Controls or 24 VAC Wire Feeders
#242 208 025 7.6 m (25 ft.)
#242 208 050 15.2 m (50 ft.)
#242 208 080 24.4 m (80 ft.)
Trailers and Hitches
(Note: Trailers are shipped unassembled.)
Mounting Specifications
4 holes
H
A B
C
Front Panel
4 West Four-Wheel Steerable
Off-Road Trailer #042 801
A heavy-duty 1166-kg (2570 lb.) capacity trailer designed for use in mines, quarries, and other rough terrain. Has narrow
6.7-m (22 ft.) turning radius. Includes
76-mm (3 in.) lunette eye, universal hitch and safety chains.
HWY-224 Trailer
#043 805 For highway use.
OFR-224 Trailer
#043 802 For off-road use.
A 1202-kg (2650 lb.) capacity trailer.
Welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension. Includes jack stand and
50-mm (2 in.) ball hitch. HWY-224 also includes fenders and lights.
Cable Tree #043 826
Provides an area to conveniently wrap weld cables and extension cords.
Dual Hitch #300 831
50-mm (2 in.) ball hitch and 76-mm (3 in.) lunette eye in one reversible assembly.
Trailer Specifications (Subject to change without notice.)
D E
F
G
A. 757 mm (29.812 in.)
B. 699 mm (27.5 in.)
C. 25 mm (1 in.)
D. 244 mm (9.625 in.)*
E. 1181 mm (46.5 in.)*
F. 1422 mm (56 in.)*
G. 1654 mm (65.125 in.)
H. 14 mm (.562 in.) diameter
Height: 1270 mm (50 in.) (to top of exhaust)
Width: 724 mm (28.5 in.)
(mounting brackets turned in)
781 mm (30.75 in.)
(mounting brackets turned out)
Depth: 1654 mm (65.125 in.)
*With mounting brackets in center position.
Dimensions vary with location of mounting brackets.
Model
4 West
HWY-224
OFR-224
Gross Axle
Weight Rating
907 kg/axle
(2000 lb./axle)
1588 kg
(3500 lb.)
Gross Vehicle
Weight Rating
1361 kg
(3000 lb.)
1343 kg
(2960 lb.)
Net
Payload
1166 kg
(2570 lb.)
1202 kg
(2650 lb.)
Height of Bed
540 mm
(21.25 in.)
470 mm
(18.5 in.)
Road
Clearance
203 mm
(8 in.)
191 mm
(7.5 in.)
Track (Center to center of tires)
1403 mm
(55.25 in.)
1321 mm
(52 in.)
Standard Tires
(Standard rating or P-size rating)
B78-13
B78-13
Dimensions
Length: 2311 mm (91 in.)*
Width: 1556 mm (61.25 in.)
Length: 2667 mm (105 in.)
Width:HWY–1511 mm (59.5 in.)**
OFR–1484 mm (58.437 in.)
Net
Weight
195 kg
(430 lb.)
145 kg
(320 lb.)
* Does not include tongue. **Width at outside of fenders.
7
Ordering Information
Equipment and Factory Options
Big Blue ® 500 X CC
Big Blue
Big Blue
Big Blue
®
®
®
500 X CC/CV
600 X CC
600 X CC/CV
Stock No.
#907 185
#907 187
#907 187-02-1
#907 184
#907 186
#907 186-02-1
#907 193
#907 189
#907 189-01-2
#907 192
#907 188
Description
Deutz D2011L03i with Engine Gauges and Dry Battery
Perkins 404D.22 with Engine Gauges and Dry Battery
Perkins 404D.22 with Engine Gauges and Dry Battery, Weld Meters and Polarity Switch
Deutz D2011L03i with Engine Gauges and Dry Battery
Perkins 404D.22 with Engine Gauges and Dry Battery
Perkins 404D.22 with Engine Gauges and Dry Battery, Weld Meters and Polarity Switch
Deutz D2011L04i with Engine Gauges and Dry Battery
Deutz D912L03 with Engine Gauges and Dry Battery
Deutz D912L03 with Engine Gauges and Wet Battery
Deutz D2011L04i with Engine Gauges and Dry Battery
Deutz D912L03 with Engine Gauges and Dry Battery
Field Accessories
Weld Ammeter and Voltmeter Kit
Polarity Reversing Switch Kit
Battery Voltmeter
Cold Weather Starting Aid Kit
International Plug
Engine Filter Kit
Spark Arrestor Muffler Kit
Lockable Flame Arrestor Fuel Cap
Vandalism Lockout Kit
Cable Holder
Protective Cover
Stick Welding Leads
MIG/Flux-Cored Welding
SuitCase ® X-TREME ™ 8VS and 12VS
SuitCase ® 8RC and 12RC
MIG (GMAW)/Flux-Cored (FCAW) Guns
Spoolmatic ® 30A Spool Gun
WC-24 Control
XR ™ Wire Feeder Control and Guns
TIG Welding
Dynasty ® 200 Series
High Frequency Arc Starters
Plasma Cutting
Remote Controls
Trailers and Hitches
4 West Four-Wheel Steerable Trailer
HWY-224 Trailer
OFR-224 Trailer
Cable Tree
Dual Hitch
Date:
#195 131
#043 942
#195 095
#195 454
#195 056
#195 307
#195 086
#255 416
#246 988
#246 989
#246 985
#195 012
#043 947
#195 118
#043 946
#194 683
See page 6
See page 7
#042 801
#043 805
#043 802
#043 826
#300 831
For all models. Analog welding meters
For all models. DC polarity switch
For all models. AC/DC polarity switch
For all models. Analog
Perkins. 120 volt block heater
Deutz D2011L03i and D2011L04i. 12 volt intake manifold heater
Deutz D2011L03i and D2011L04i. 120 volt oil pan heater
1-phase, 240 V, 16 A
Deutz D2011. Includes air, oil and fuel filters
Deutz D912. Includes air, oil and fuel filters
Perkins 404. Includes air, oil and fuel filters
For all models. Horizontal externally mounted
For all models. Padlock not included
For all models. Lockable front control panel and engine compartment
For all models. Stores up to 61 m (200 ft.) of 2/0 weld cable
For all models. Will not work with cable holder accessory
See page 6
#300 656 / #300 659 See Lit. Index No. M/6.41
#300 660/ #300 663 See Lit. Index No. M/6.5
See Lit. Index Nos. AY/15.0, AY/16.0 and AY/17.0
#130 831
#137 549
Requires WC-24 Control. See Lit. Index No. M/1.73
See Lit. Index No. M/1.5
See Lit. Index No. M/1.7, M/1.71, and M/1.73
See Lit. Index No. AD/4.8
See Lit. Index No. AY/5.0
Trailer with lunette eye, universal hitch and safety chains. For off-road use
Trailer with lights, fenders and 50-mm (2 in.) ball hitch. For highway use
Trailer with 50-mm (2 in.) ball hitch. For off-road use
Trailer mounted cable holder for HWY-224 or OFR-224
Combination 50-mm (2 in.) ball hitch and 76-mm (3 in.) lunette eye in one reversible assembly. For HWY-224 or OFR-224
Total Quoted Price:
Qty.
Price
Distributed by:
Litho in USA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- - Hand Control
- - Control
- - Off-Road Trailer
- 8 Cable Tree
- 8 Dual Hitch