advertisement
SyncMaster P2370HD P2570HD P2770HD
LCD TV Monitor
User Manual
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
INSTALLING THE PRODUCT
Attaching a Wall Mount/Desktop Stand . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Connecting an HDMI cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Connecting Using a DVI to HDMI Cable . . . . . . . . . . . . . . . . . . . . . . . 2-8
Connecting a Component cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Connecting AV Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Connecting to an Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Connecting Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
USING THE PRODUCT
Viewing the Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-4
Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
INSTALLING THE SOFTWARE
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
MORE INFORMATION
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
1 Major Safety Precautions
1-1 Before You Start
Icons used in this manual
ICON NAME
Caution
Note
MEANING
Indicates cases where the function may not work or the setting may be canceled.
Indicates a hint or tip to operate a function.
Using this Manual
• Make yourself fully aware of the safety precautions before using this product.
• If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright ©2009 Samsung Electronics Co., Ltd. All Rights Reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co., Ltd.
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
The ENERGY STAR
®
logo is the registered trademark of the U.S. Environmental Protection Agency.
All other trademarks mentioned herein belong to their respective companies.
As an ENERGY STAR
®
partner, Samsung Electronics, Co., Ltd. certifies that this product satisfies the ENERGY STAR
® specifications for energy saving.
1-2 Care and Maintenance
External Surface and Screen Maintenance
Clean the product with a soft dry cloth.
• Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product.
• Avoid scratching the screen with your fingernails or a sharp object.
• Avoid cleaning the product by spraying water onto it. If water enters the product, it may result in fire, electric shock or a problem with the product.
A white stain may be generated on the surface of the model if a supersonic humidifier is used near it.
The appearance and the color may differ depending on models.
Securing the Installation Space
• Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
Install the product so the required distances shown in the figure are kept.
The appearance may differ depending on the product.
When installing the product with a stand When installing the product with a wall-mount
About persistent images
• Displaying a still image for a long time may create a persistent image or stain on the screen.
If you do not use the product for a long time, set the power-saving mode or screen saver.
• Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either brighter or darker than normal by appr. 1ppm (parts per million) pixel.
The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical
Resolution x 3
Example) If the maximum resolution is 1920 x 1080, the number of sub-pixels is 1920 x 1080 x 3 = 6,220,800.
1-3 Safety Precautions
Icons used for safety precautions
ICON NAME
Warning
Caution
MEANING
Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality.
Failing to follow the precautions marked with this sign may result in a personal injury or property damage.
Meaning of Signs
Do not perform.
Do not disassemble.
Do not touch.
Must be followed.
The power plug must be unplugged from the wall outlet.
Must be grounded to prevent electric shock.
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord or plug or a loose power outlet.
• Otherwise, it may result in electric shock or fire.
Avoid plugging in or unplugging the power supply with wet hands.
• Otherwise, it may result in electric shock.
Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only).
• Otherwise, it may result in electric shock or injury.
Keep the power cord and the product away from a heater.
• Otherwise, it may result in electric shock or fire.
Avoid connecting multiple electric appliances to a single wall outlet.
• Otherwise, it may result in fire due to overheating of the wall outlet.
Plug the power plug in firmly.
• Otherwise, it may result in fire.
Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord.
• Otherwise, it may result in electric shock or fire due to a damaged power cord.
If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth.
• Otherwise, it may result in fire.
Major Safety Precautions 1-3
Caution
Avoid unplugging the power plug while the product is operating.
• Otherwise, it may damage the product due to electric shock.
When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord.
• Otherwise, it may result in electric shock or fire.
Installation Related
Warning
Avoid placing burning candles, mosquitorepellent or cigarettes on the product.
• Otherwise, it may result in fire.
Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet.
• Otherwise, it may result in fire due to internal over-heating.
Keep the plastic bags used to pack the product away from children.
• If children place the plastic bags over their heads, they may suffocate.
Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle.
• This may result in electric shock or fire.
Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance.
• Otherwise, it may result in electric shock or fire.
Connect the power plug to a wall outlet that can be easily reached.
• When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product.
Ask an installation engineer or relevant company to install the product onto the wall.
• Otherwise, it may result in injury.
• Make sure to use the specified wall mount.
Keep a distance of at least 10 cm (3.93 inches) from the wall when installing the product for ventilation.
• Otherwise, it may result in fire due to internal over-heating.
Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf.
• The product may fall and this may result in damage to the product or injury.
• If you use the product in a location exposed to excessive vibration, it may result in a problem with the product or fire.
Avoid installing the product in a location exposed to direct sunlight or near a heat source such as a fireplace or heater.
• This may shorten the product life cycle or cause fire.
1-3 Major Safety Precautions
Avoid installing the product where children may reach it.
• If a child touches the product, the product may fall and this may result in injury.
• Since the front part is heavier, install the product on a flat and stable surface.
Install the antenna far away from any high voltage cables.
• If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire.
Caution
Do not let the product drop while moving it.
• This may result in a problem with the product or injury.
When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf.
• Otherwise, this may cause the product to fall off and result in a malfunction or injury.
• Make sure to use a cabinet or shelf suitable to the size of the product.
If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter.
• Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports or stations where the product is continuously used.
Cleaning Related
Warning
Before cleaning the product, unplug the power cord.
• Otherwise, it may result in electric shock or fire.
Major Safety Precautions
Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in.
• If rainwater enters the product, it may result in electric shock or fire.
Do not place the product face down on the floor.
• This may damage the panel of the product.
When putting the product down, handle it gently.
• Otherwise, it may result in a problem with the product or injury.
When cleaning the product, do not spray water directly over the product parts.
• Make sure that water does not enter the product.
• Otherwise, it may result in fire, electric shock or a problem with the product.
1-3
Caution
Avoid spraying cleansing agent directly onto the product.
• This may result in discoloration or cracking of the exterior of the product or the panel coming off.
If you can't get the product clean with just the supplied cloth, use a soft, damp cloth with a "monitor-exclusive cleansing agent" and wipe the product with it.
• If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product.
Usage Related
Warning
Since a high voltage runs through the product, never disassemble, repair or modify the product yourself.
• Otherwise, it may result in fire or electric shock.
• If the product needs to be fixed, contact a service center.
If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service center.
• Otherwise, it may result in electric shock or fire.
If you drop the product or the case is damaged, turn the power off and unplug the power cord.
• Otherwise, it may result in fire or electric shock.
When thunder or lighting occurs, unplug the power cord and under no circumstance touch the antenna cable as this is dangerous.
• Otherwise, it may result in electric shock or fire.
1-3
When cleaning the product, disconnect the power cord and clean the product with the supplied cleaning cloth.
• Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product.
This may result in the exterior being deformed or the print being removed.
Since the exterior of the product is easily scratched, be sure to use the supplied cleansing cloth.
To move the product, turn the power off and unplug the power cord, the antenna cable and any other wires connected to the product.
• Otherwise, it may result in electric shock or fire due to the damaged power cord.
Avoid letting children hang or climb onto the product.
• Otherwise, it may result in the product falling and this may result in injury or death.
Avoid placing objects such as toys and cookies on top of the product.
• If a child hangs over the product to grab an object, the object or the product may fall and this may result in injury or even death.
Avoid dropping an object over the product or cause impact to the product.
• Otherwise, it may result in electric shock or fire.
Major Safety Precautions
Avoid moving the product by pulling the power cord or antenna cable.
• Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.
Avoid lifting up or moving the product by holding only the power cord or signal cable.
• Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.
Take care not to block the vent by a table cloth or curtain.
• Otherwise, it may result in fire due to internal overheating.
Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmetics or drugs, or a metal object over the product.
• If water or substances enter the product, turn the power off, unplug the power cord and contact a service center.
• Otherwise, it may result in a problem with the product, electric shock or fire.
Caution
Displaying a still image for a long time may create a persistent image or stain on the screen.
• If you do not use the product for a long time, use the power-saving mode or set the screensaver to the moving picture mode.
Set the appropriate resolution and frequency for the product.
• Otherwise, it may result in eye strain.
Watching the product from too close a distance continuously may damage your eyesight.
It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time.
• This will alleviate any eye strain.
Major Safety Precautions
When a gas leak occurs, do not touch the product or the power plug and ventilate immediately.
• A spark may result in an explosion or fire.
• During a thunder or lighting storm, do not touch the power cord or antenna cable.
Avoid using or placing inflammable spray or objects near the product.
• This may result in an explosion or fire.
Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc).
• If water or substances enter the product, turn the power off, unplug the power cord and contact a service center.
• Otherwise, it may result in a problem with the product, electric shock or fire.
When not using the product for a long time such as leaving your home, unplug the power cord from the wall outlet.
• Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock.
Avoid turning the product upside down or move the product holding only the stand.
• This may cause the product to fall, resulting in damage to the product or injury.
Avoid using a humidifier or cooker near the product.
• Otherwise, it may result in electric shock or fire.
Since the display panel is hot after using it for a long time, do not touch the product.
1-3
Keep the small accessories in a location out of the reach of children.
Avoid placing a heavy object over the product.
• Otherwise, it may result in a problem with the product or injury.
Be careful that children do not place the batteries in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach.
• If children have had the battery in their mouths, consult your doctor immediately.
Use only specified standard batteries. Do not use new and used batteries together.
• This may cause a battery to break or leak and may cause fire, injury, or contamination (damage).
Take care when adjusting the angle of the product or the height of the stand.
• If your hand or finger is caught, you may be injured.
• If the product is tilted excessively, the product may fall and this may result in injury.
When using headphones or earphones, do not turn the volume too high.
• Having the sound too loud may damage your hearing.
When replacing the batteries, insert them with right polarity (+, -).
• Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid.
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
• The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm (15~19 inches) from your eyes to the screen. Look down at the screen and face the screen forwards.
• Maintain the correct posture when using this product.
• Adjust the angle of the product so that light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart.
1-3 Major Safety Precautions
2 Installing the Product
2-1 Package Contents
• Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the product at a later stage.
CONTENTS
Installation Manual Product Warranty
(Not available in all locations)
User Manual Power Cord
Cable Holder Batteries (AAA X 2)
(Not available in all locations)
Stand Connector Stand Base
Remote Control Cleaning Cloth
SOLD SEPARATELY
D-Sub Cable HDMI Cable
The cleaning cloth is supplied with black high-glossy models only.
Stereo Cable
Installing the Product 2-1
2-2 Installing the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Insert the Stand Connector into the Stand Base in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the Stand base fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the cloth face down.
2-2 Installing the Product
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
- Caution
Do not lift the product holding only the stand
Installing the Product 2-2
2-3 Removing the Stand
Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards.
Place a soft cloth over the table to protect the product and place the product face down.
Hold the main body of the product with your hand as shown by the figure.
Pull the stand in the direction of the arrow as shown in the figure to separate it.
Turn the connecting screw at the bottom of the Stand base to separate it from the Stand connector.
Take the Stand Connector out of the Stand base by pulling it in the direction of the arrow as shown in the figure.
2-3 Installing the Product
2-4 Attaching a Wall Mount/Desktop Stand
Attaching a Wall Mount/Desktop Stand(not supplied)
P2370HD : This product complies with 75 mm x 75 mm (2.95 x 2.95 inches) VESA specifications.
P2570HD : This product complies with 100 mm x 100 mm (3.94 x 3.94 inches) VESA specifications.
P2770HD : This product complies with 100 mm x 100 mm (3.94 x 3.94 inches) VESA specifications.
A. Wall/Desktop Stand Mount
B. Wall mount kit/desktop stand (not supplied)
1.
Turn the product off and unplug the power cord from the wall outlet.
2.
Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.
3.
Align wall mount/desktop stand to the Monitor/TV and firmly fix the wall mount/desktop stand by fastening the screw.
4.
Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.
• If you use screws that are longer than the standard specifications, the inside of the product may be damaged.
• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications.
• Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force.
This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any damage or injury.
• Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer.
• When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space from the wall.
• Use the wall mount according to the international specifications.
Installing the Product 2-4
2-5 Connecting to a Computer
1. Connect the product to a PC depending on the video output supported by the PC.
The connecting part may differ depending on the product model.
When the graphics card provides a D-Sub (analog) output
• Connect the [PC IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
When the graphics card provides a DVI (digital) output
2-5 Installing the Product
• Connect the [DVI-D IN] port of the product to the [DVI] port of the PC with the DVI cable.
2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
3. Connect one end of the power cord to the [ POWER ] port of the product and connect the other end of the power cord to the
110V or 220V wall outlet.
(The input voltage is switched automatically.)
Installing the Product 2-5
• You may enjoy clear and quality sound from the computer sound card using the monitor's speakers. (You don't need to install separate speakers for your computer.)
• You may get a blank screen depending on the type of video card you are using if you connect the D-sub and DVI cables simultaneously to one computer.
• If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analog. Press [ ] button to have the monitor double-check the input signal source.
2-5 Installing the Product
2-6 Using it as a TV
You may view television programs on the monitor if it is connected to an antenna or cable/satellite system without installing any separate TV reception hardware or software on your computer.
1.
Connect the cable/satellite or TV antenna cable to the [ANT IN] port on the rear side of the monitor.
• When using an indoor antenna/cable/satellite terminal:
Check the antenna terminal on the wall and then connect the antenna/cable/satellite TV cable.
• When using an outdoor antenna:
When using an outdoor antenna, we strongly suggest using a qualified technician to install it.
2.
When the connections are completed, connect the TV power.
3.
When the product is turned on for the first time after it was purchased, the initial setup operations (<Plug & Play>) begin.
• Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal [ANT IN].
Installing the Product 2-6
2-7 Connecting an HDMI cable
Connect the HDMI OUT port of the AV device (Blu-Ray/DVD/Cable/Satellite box) to the [HDMI IN] terminal of the monitor using the HDMI cable.
Press the [SOURCE] button at the front of the monitor or on the remote control to select <HDMI> mode.
You do not need to make a separate audio connection when connecting via HDMI.
2-7 Installing the Product
2-8 Connecting Using a DVI to HDMI Cable
1. Connect the DVI output terminal of an external device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable.
2. Connect the red and white plugs of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite plug to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product.
Press the [SOURCE] button at the front of the monitor or on the remote control to select <HDMI> mode.
Installing the Product 2-8
2-9 Connecting a Component cable
1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [P
R
, P
B
, Y]] input ports using a component video cable [P
R
, P
B
,Y].
2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [[R-AUDIO-L]] port of the monitor.
Press the [SOURCE] button at the front of the monitor or on the remote control to select the <Component> mode.
For an explanation of Component video, consult your DVD/VCR/Cable/Satellite box manual.
2-9 Installing the Product
2-10 Connecting AV Devices
1.
Connect the port of the AV device (DVD/VCR/Cable/Satellite box/Camcorder) to the [AV IN [ R-AUDIO-L ] port of the product.
2.
Connect the video output terminal of the AV device and the [AV IN [VIDEO]] of the monitor using a video cable.
3.
Select [AV]using the <SOURCE> button on the remote.
• The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.)
Installing the Product 2-10
2-11 Connecting to an Amplifier
Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical cable.
• If no sound is emitted from the monitor, you need to use an amplifier.
• For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their manufacturers.
2-11 Installing the Product
2-12 Connecting Headphones
Connect your headphones to the Headphone connection terminal.
Installing the Product 2-12
2-13 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device. You have to purchase the locking device separately.
Locking the product
1.
Insert the locking part of the locking device into the hole of the Kensington lock of the product ( ) and turn it in the locking direction ( ).
2.
Connect the Kensington lock cable.
3.
Tie the Kensington lock cable to a desk or heavy object.
You can purchase the locking device from an electronics store or an online shop.
2-13 Installing the Product
3 Using the Product
3-1 Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
Press the [POWER ] button on the remote control.
• You can also use the [ ] button on the TV.
The message <Select Language of the OSD.> is displayed.
2.
Press the [ ] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [ ] button to confirm your choice.
3.
Press the ◄ or ► button to select <Store Demo> or <Home Use>, then the [ ] button.
• We recommend setting the TV to <Home Use> mode for the best picture in your home environment.
• <Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo> mode and you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the [ MENU ] button on the TV for 5 seconds.
4.
Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the [ ] button to select <Start>.
• <Air>: <Air> antenna signal. / <Cable>: <Cable> antenna signal. / <Auto>: <Air> and <Cable> antenna signals.
• In Cable mode, you can select the correct signal source among <STD>, <HRC>, and <IRC> by pressing the ▲, ▼,
◄ or ► button, then press the [ ] button. If you have Digital cable, select the cable system signal source for both
Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5.
Press the [ ] button to select <Start>. The TV will begin memorizing all of the available channels.
• To stop the search before it has finished, press the [ ] button with <Stop> selected.
• After all the available channels are stored. The Auto program menu then reappears. Press the [ ] button when channel memorization is complete. The message <Set the Clock Mode.> is displayed.
6.
Press the [ ] button.
Press the ▲ or ▼ button to select <Auto>, then press the [ ] button. If you select <Manual>,<Set current date and time> is displayed.
7.
Press the ▲ or ▼ button to select <Off>, <On> or <Auto>, then press the [ ] button.
8.
Press the ▲ or ▼button to highlight the time zone for your local area. Press the [ ] button. If you have received a digital signal, the time will be set automatically.
9.
An HD Connection guide will appear. After reading, press the [ ] button.
Using the Product 3-1
10.
The message <Enjoy your TV.> is displayed. When you have finished, press the [ ] button.
If you want to reset this feature...
1.
Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select <Setup>, then press the [ ] button.
2.
Press the [ ] button again to select <Plug & Play>.
The <Plug & Play> feature is only available in the TV mode.
3-1 Using the Product
3-2 Viewing the Control panel
Touch one of the operating buttons lightly.
The LED buttons appear.
ICON
[
[MENU]
[
[ -/+ ]
[
/
]
]
]
Speaker
DESCRIPTION
-
Use this button to select a function.
Signals other than the TV signal can only be selected if the corresponding device is connected.
The order in which the TV/external input signal changes.
<PC>→<TV>→<DVI>→<AV>→<Component>→<HDMI>
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu.
Moves from one menu item to another horizontally or adjusts selected menu values.
Adjusts the audio volume.
Use these buttons to navigate the menu or to adjust a value in the OSD.
Press to change channels in TV mode.
Press this button to turn the product on or off.
Power LED
This LED is turned on when the product works normally.
For information about the power saving function, refer to the power saving function section of the product specifications. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption.
Using the Product 3-2
3-3 Remote Control
The performance of the remote control may be affected by a TV or other electronic device operating near the product, causing a malfunction due to interference with the frequency.
POWER
Turns the product On/Off.
Number Buttons
Press to change the channel.
TV
Selects the TV mode directly.
PRE-CH
This button is used to return to the previous channel viewed.
: Press to select additional channels (digital) being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press ‘ ’ and ‘3’.
+ VOL -
Press to increase or decrease the volume.
CH LIST
It displays "Channel List" on the screen.
MUTE
Press to temporarily cut off the sound.
CH
Press to change channels.
SOURCE
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time.
FAV.CH
Press to switch to your favorite channels.
MENU
Opens the on-screen menu and exits from the menu or closes the adjustment menu.
TOOLS
Use to quickly select frequently used functions.
UP▲/DOWN▼/LEFT◄/RIGHT►/
ENTER : Use to select onscreen menu items and change menu values.
RETURN
Returns to the previous menu.
EXIT
Exits from the menu screen.
CC
Controls the caption decoder.
INFO
Current picture information is displayed on the upper left corner of the screen.
COLOR BUTTONS
Press to add or delete channels and to store channels to the favorite channel list in the ”Channel List” menu.
P.SIZE
Picture size selection.
MTS
Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
3-3 Using the Product
Installing Batteries in the Remote Control
1.
Lift the cover at the back of the remote control upward as shown in the figure.
2.
Install two AAA size batteries.
Make sure to match the +and - ends of the batteries with the diagram inside the compartment.
3.
Close the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time.
If the remote control doesn't work, check the following :
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
Using the Product 3-3
3-4 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
TOP MENUS
Picture
[PC / DVI]
Picture
[TV / AV / Component /
HDMI]
Sound
MagicBright
Screen
Mode
Mode
Picture Options
Backlight
Equalizer
Channel
Setup
Auto Volume
Antenna
Speaker Select
Auto Program
SUB MENUS
Picture Reset
Contrast Brightness Sharpness
Advanced Picture Reset tings
SRS TruSurround HD
Preferred Language
Multi-Track
Sound
Sound Reset
Clear Scrambled Channel
Time
Light Level
Channel List
Game Mode
Melody
Fine Tune
V-Chip
Energy Saving
Input
Application
Support
Plug & Play
Caption
Source List
Anynet+ (HDMI-
CEC)
Self Diagnosis
Language
Light Effect
Edit Name
Software
Upgrade
HD Connection
Guide
Contact Samsung
Available Modes
The icons below represent the input signals that are displayed when selecting an item in the <Source List>.
Indicates the signal when <PC> or <DVI> is selected in the <Source List >.
This is the PC video signal that is connected to and input through the [PC] or [DVI] terminals.
Indicates the signal when <AV> is selected in the <Source List >.
This is the video signal input through the [VIDEO] terminal.
Indicates the signal when <HDMI> is selected in the <Source List >.
This is the signal input through the [HDMI] terminal.
Indicates the signal when <TV> is selected in the <Source List >.
This is the signal input through the [ANT IN] terminal.
Indicates the signal when <Component> is selected in the <Source List >.
This is the signal input through the [COMPONENT] terminal.
3-4 Using the Product
Picture [PC / DVI ]
The default setting may be different depending on the selected Input Mode (input signal source selected in External Input
List) and the selected resolution
MENU
MagicBright
DESCRIPTION
<MagicBright> is a feature providing an optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: <Entertain>, <Internet>,
<Text>, <Dynamic Contrast> and <Custom>. Each mode has its own pre-configured brightness value.
• <Entertain>
High Brightness
For watching motion pictures such as a Blu-Ray or DVD.
• <Internet>
For working with a mixture of images such as texts and graphics.
• <Text>
For documents or work involving heavy text.
• <Dynamic Contrast>
<Dynamic Contrast> automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.
• <Custom>
Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.
If this is the case, adjust the <Brightness> and <Contrast> by using the OSD menu.
Contrast / Brightness /
Sharpness
Auto Adjustment
Press the [TOOLS] button to display the Tools menu. You can also set the <MagicBright> by selecting <Tools>→<MagicBright>.
You can use the on-screen menus to change the contrast and brightness according to personal preference.
• <Contrast> - Adjusts the contrast level of the picture.
• <Brightness> - Adjusts the brightness level of the picture.
• <Sharpness> - Adjusts the edge definition of the picture.
The values of <Fine>, <Coarse> and <PC Position> are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
Available in <PC> Mode Only
Press the [TOOLS] button to display the Tools menu. You can also set the <Auto Adjustment >by selecting <Tools>→<Auto Adjustment>.
Using the Product 3-4
MENU DESCRIPTION
Screen • <Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu
• <Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency (<Coarse>.)
• <PC Position>
Adjusts the screen location horizontally and vertically.
• <Image Reset>
Image parameters are replaced with the factory default values.
Picture Options
Available in <PC> Mode Only
• <Color Tone>
The tone of the color can be changed.
Picture Reset
Available in <PC> / <DVI> mode only
• <Cool> - <Normal> - <Warm> - <Custom>
• <R-Gain > - < G-Gain > - <B-Gain >
Adjusts the individual R, G, B (Red, Green, Blue) color controls.
• <Size>
You can switch the Size.
• <16:9> - <4:3>
Picture parameters are replaced with the factory default values.
• <Reset Picture Mode> - <Cancel>
Picture [ TV / AV / Component / HDMI ]
3-4 Using the Product
Mode
MENU
Backlight / Contrast /
Brightness / Sharpness / Color / Tint (G/
R)
Advanced Settings
DESCRIPTION
The Monitor has three automatic picture settings (<Dynamic>, <Standard>, and <Movie>) that are preset at the factory.
You can activate either <Dynamic>, <Standard>, or <Movie>.
• <Dynamic>
Selects the picture for high-definition in a bright room.
• <Standard>
Selects the picture for optimum display in a normal environment.
• <Movie>
Selects the picture for viewing movies in a dark room.
Press the [TOOLS] button to display the Tools menu. You can also set the <Picture Mode> by selecting <Tools>→<Picture Mode>.
Your television has several setting options that allow you to control the picture quality.
• <Backlight > - Adjusts the brightness of LCD back light.
• <Contrast> - Adjusts the contrast level of the picture.
• <Brightness> - Adjusts the brightness level of the picture.
• <Sharpness> - Adjusts the edge definition of the picture.
• <Color> - Adjusts color saturation of the picture.
• <Tint (G/R)> - Adjusts the color tint of the picture.
Samsung‘s new TVs allow you to make even more precise picture settings than previous models.
See below to adjust detailed picture settings.
<Advanced Settings> is available in <Standard> or <Movie> mode.
• <Black Tone> - You can select the level on the screen to adjust the screen depth.
• <Off> - <Dark> - <Darker> - <Darkest>
• <Dynamic Contrast> -You can adjust the screen contrast so that the optimal contrast is provided.
• <Off> - <Low> - <Medium> - <High>
• <Gamma> - You can adjust the Primary Color (Red, Green, Blue) Intensity.
• <Color Space> - <Color Space> is a color matrix composed of red, green and blue colors. Select your favorite <Color Space> to experience the most natural color.
• <Auto> - <Native>
• <White Balance> - You can adjust the color temperature for more natural picture colors.
• <R-Offset> - <G-Offset> - <B-Offset> - <R-Gain> - <G-Gain> - <B-Gain> - <Reset>
• <Flesh Tone> - You can emphasize the pink <Flesh Tone> in the picture.
Changing the adjustment value will refresh the adjusted screen.
• <Edge Enhancement> - You can emphasize object boundaries in the picture.
• <Off> - <On>
Using the Product 3-4
MENU
Picture Options
Picture Reset
DESCRIPTION
• <Color Tone>
The tone of the color can be changed.
• <Cool> - <Normal> - <Warm1> - <Warm2>
• <Warm1> or <Warm2> is only activated when the picture mode is <Movie>.
• Settings can be adjusted and stored for each external device you have connected to an input of the TV.
• <Size>
You can switch the Size.
The direct button on the remote control is [P.SIZE] button.
• <16:9> - Sets the picture to 16:9 wide mode.
• <Zoom1> - Magnifies the size of the picture on the screen.
• <Zoom2> - Magnifies the size of the picture more than <Zoom1>.
• <Wide Fit> - Enlarges the aspect ratio of the picture to fit the entire screen.
• <4:3> - Sets the picture to 4:3 normal mode.
• <Screen Fit> - Use the function to see the original image with no cut-off with HDMI (720p/ 1080i
/ 1080p), Component (1080i / 1080p) or DTV (1080i) input signals.
• After selecting <Zoom1>, <Zoom2> or <Wide Fit>: Press the ▲or▼ button to select
<Position>, then press the [ ] button. Press the ▲or▼ button to move the picture up and down.
• Reset : Press the ▲or▼ button to select Reset , then press the [ ] button. You can initialize the setting.
• Settings can be adjusted and stored for each external device you have connected to an input of the TV.
• <TV>, <Component> (480i,480p)
- <16:9>, <Zoom1>, <Zoom2>, <4:3>
• <DTV> (1080i), <Component> (1080i, 1080p) ,<HDMI>(720p,1080i,1080p)
- <16:9>, <Wide Fit>, <4:3>, <Screen Fit>
• <Digital NR>
Digital Noise Reduction.
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
• <Off> - <Low> - <Medium> - <High> - <Auto>
• <HDMI Black Level>
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external device is connected via <HDMI>.The <HDMI
Black Level> function may not be compatible with all external devices.
• <Normal> - <Low>
• <Film Mode>
The <Film Mode> feature offers you a theater-quality viewing experience.
<Film Mode> is supported in <TV>, <Component> (480i / 1080i) and <HDMI>(480i / 1080i)
• <Off> - <Auto>
Picture parameters are replaced with the factory default values.
• <Reset Picture Mode> - <Cancel>
3-4 Using the Product
Sound
Mode
MENU DESCRIPTION
• <Standard>
Choose Standard for the standard factory settings.
• <Music>
Choose Music when watching music videos or concerts.
• <Movie>
Choose Movie when viewing movies.
• <Clear Voice >
Emphasizes voice over other sounds.
• <Custom >
Choose Custom if you want to adjust the settings according to personal preference .
Equalizer You can adjust the left and right sound balance and equalizer settings as required.
• <Mode> - You can select a sound mode to suit your personal preferences.
• <Balance> - You can adjust the left and right sound balance and equalizer settings as required.
• <100Hz> - <300Hz> - <1KHz> - <3KHz> - <10KHz> - <Reset>
SRS TruSurround HD <SRS TruSurround HD> is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
• <Off> - <On>
Preferred Language
Press the [TOOLS] button to display the Tools menu. You can also set the <Sound Mode> by selecting <Tools>→<Sound Mode>.
Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).
• <English> - <Spanish> - <French>
• You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.
• Preferred Language is available only in Digital TV mode.
• You can only select the language from among the actual languages being broadcast.
Using the Product 3-4
MENU
Multi-Track Sound
Auto Volume
Speaker Select
Sound Reset
DESCRIPTION
• <Mono>
Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
• <Stereo>
Choose for channels that are broadcasting in stereo.
• <SAP>
Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Available in Analog <TV> Mode Only
Reduces the differences in volume level among channels.
• <Off> - <On>
When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater’s (external) speakers.
• <External Speaker>
Used to listen to the sound of the External (Home Theater) Speakers.
• <TV Speaker>
Used to listen to the sound of the TV Speakers.
• If you select <External Speaker> in the <Speaker Select> menu, the sound settings will be limited.
• The volume and [MUTE] buttons do not operate when the <Speaker Select> is set to
<External Speaker>. Please set the volume on your Home theater.
You can restore the Sound settings to the factory defaults.
• <Reset All> - <Reset Sound Mode> - <Cancel>
<Reset Sound Mode>: Current sound values return to default settings.
Channel
3-4 Using the Product
Antenna
MENU
Auto Program
Clear Scrambled
Channel
DESCRIPTION
You can select antenna or cable TV.
If [ANT IN] connected, select the antenna input you want. If the antenna input is not selected properly, noise may appear on the screen.
• <Air> - <Cable>
The TV automatically cycles through all of the available channels and stores them in memory.
In rare cases, <Auto program> may miss a few channels due to weak signals and the channels may not be added to the channel memory.
• <Air> - <Cable> - <Auto>
The Clear Scrambled Channel function is used to filter out scrambled channels after "Auto Program" is completed. It removes the scrambled channels from the list by tuning the digital cable channels.
This process may take up to 20~30 minutes.
This function is only available in <Cable> mode.
Using the Product 3-4
MENU
Channel List
Fine Tune
DESCRIPTION
Using this menu, you can add / delete or set favorite channels and use the program guide for digital broadcasts.
You can select these options by simply pressing the [CH LIST] button on the remote control.
• <All Channels> - Shows all currently available channels.
• <Added Channels> - Shows all added channels.
• <Favorite> - Shows all favorite channels.
Press the [TOOLS] button to display the <Tools> menu. You can also set the add to (or delete from) Favorites by selecting <Tools>→<Add to Favorite> (or <Delete from Favorite>).
To select the favorite channels you have set up, press the [FAV.CH] button on the remote control
• <Programmed> - Shows all current reserved programs.
• Select a channel in the <All Channels>, <Added Channels> or <Favorite> screen by pressing the ▲ / ▼ buttons, and pressing the [ ] button. Then you can watch the selected channel.
• Using the Color buttons with the Channel List
• <Green> : Enlarges or shrinks a channel number.
• <Yellow> : Selects multiple channel lists. You can perform the add / delete or add to
Favorite / delete from Favorite function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time. The mark appears to the left of the selected channels.
• <TOOLS> : Displays the <Add> (or <Delete>), <Add to Favorite> (or <Delete from
Favorite>), <Timer Viewing>, <Channel Name Edit>, <Select All> (or <Deselect All>) and <Auto Program> menus (The Options menus may differ depending on the situation.)
• Channel Status Display Icons
•
•
: A channel set as a Favorite.
: A channel selected by pressing the yellow button.
• : A Program currently being broadcast.
• : A reserved program.
Use fine tuning to manually adjust a particular channel for optimal reception.
• If you do not store the fine-tuned channel in memory, adjustments are not saved.
• Fine tuned channels that have been saved are marked with an asterisk <*> on the righthand side of the channel number in the channel banner.
• To reset the fine tuning setting, press the ▼ button to select Reset, then press the [ ] button.
Only Analog TV channels can be fine tuned.
3-4 Using the Product
Setup
MENU
Plug & Play
Language
Time
DESCRIPTION
This brings up the menu items that appeared when you first plugged in the TV.
You can set the menu language.
The language chosen affects only the language of the OSD.
• <Clock>
Setting the clock is necessary in order to use the various timer features of the TV.
• The current time will appear every time you press the [INFO] button.
• If you disconnect the power cord, you have to set the clock again.
• <Clock Mode>
You can set up the current time manually or automatically.
• <Auto> - <Manual>
• Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually.
• The Antenna or cable must be connected in order to set the time automatically.
• <Clock Set>
You can set the current time manually.
• This function is only available when <Clock Mode> is set to <Manual>.
• You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.
• <Time Zone>
Select your time zone.
This function is only available when <Clock Mode> is set to <Auto>.
• <DST> (Daylight Saving Time)
Switches the Daylight Saving Time function on or off.
• <Off> - <On> - <Auto>
This function is only available when <Clock Mode> is set to <Auto>.
Using the Product 3-4
Time
MENU
Game Mode
DESCRIPTION
• <Sleep Timer>
The sleep timer automatically shuts off the TV after a preset time .
• <Off> - <30 min.> - <60 min.> - <90 min.> - <120 min.> - <150 min.> - <180 min.>
Press the [TOOLS] button to display the Tools menu. You can also set the sleep timer by selecting <Tools>→<Sleep Timer>.
To cancel the <Sleep Timer> function, select <Off>.
• <Timer1> / <Timer2> / <Timer3>
Three different on / off timer settings can be made. You must set the clock first.
• <On Time>
Set the <hour>, <minute>, <am/pm>, and <activate/inactivate>.
(To activate the timer with the setting ve chosen, set to Activate.)
• <Off Time>
Set the <hour>, <minute>, <am/pm>, and <activate/inactivate>.
(To activate the timer with the setting you’ve chosen, set to Activate.)
• <Volume>
Set the desired volume level.
• <Antenna>
View antenna type. (<Air> or <Cable>).
You can set the Antenna by selecting <Channel>→<Antenna>.
• <Channel>
Select the desired channel.
• <Repeat>
Select <Once>, <Everyday>, <Mon~Fri>, <Mon~Sat>, <Sat~Sun> or <Manual>.
• When <Manual> is selected, press the ► button to select the desired day of the week. Press the [ ] button over the desired day and the ( ) mark will appear.
• You can set the <hour>, <minute> and channel by pressing the number buttons on the remote control.
• Auto Power Off
When you set the timer On, the television will eventually turn off if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game menu.
• <Off> - <On>
• Restrictions on game mode (Caution)
• To disconnect the game console and connect another external device, set <Game
Mode> to <Off> in the setup menu.If you display the TV menu in <Game mode>, the screen shakes slightly.
• If <Game Mode> is <On> :
• Picture mode is automatically changed to <Standard> and cannot be changed.
• Sound mode is automatically changed to <Custom> and cannot be changed. Adjust the sound using the equalizer.
• <Game Mode> is not available in regular <TV> and <PC> mode.
• If the picture is poor when external device is connected to TV, check if <Game Mode> is
<On>. Set <Game Mode> to <Off> and connect external devices.
3-4 Using the Product
MENU
V-Chip (U.S.A only)
DESCRIPTION
The <V-Chip> feature automatically locks out programs that are deemed inappropriate for children.
The user must enter a PIN (personal ID number) before any of the <V-Chip> restrictions are set up or changed.
• <V-Chip> function is not available in <HDMI>, <Component> or <PC> mode.
• The default PIN number of a new TV set is 0-0-0-0
• If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : [POWER](off)→[MUTE]→8→2→4→[POWER] (on).
• <Allow all>: Press to unlock all TV ratings.
• <Block all>: Press to lock all TV ratings.
• <V-Chip Lock> - You can block rated TV Programs.
• <Off> - <On>
• <TV Parental Guidelines> - You can block TV programs depending on their rating. This function allows you to control what your children are watching.
• <MPAA Rating> - You can block movies depending on their <MPAA rating>. The Motion Picture
Association of America(MPAA) has implemented a rating system that provides parents or guardians with information on which films are appropriate for children.
• <Canadian English>
• <Canadian French>
• <Downloadable U.S. Rating> - Parental restriction information can be used while watching DTV channels
• <Change PIN> - The <Change PIN> screen will appear. Choose any 4 digits for your PIN and enter them.
As soon as the 4 digits are entered, the <Confirm New PIN> screen appears. Re enter the same
4 digits. When the Confirm screen disappears, your PIN has been memorized.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
- If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:
<This channel is blocked by a Parental Lock.> <Please enter the PIN to unblock.>
Enter your PIN, then press the button [ ] button and press the ▲or▼ button to temporarily disable the V-Chip Lock.
If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : [POWER](off)→[MUTE]→8→2→4→[POWER] (on).
Using the Product 3-4
MENU
Caption(On-Screen
Text Messages)
Light Effect
Light Level
DESCRIPTION
• <Caption>
You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
• <Off> - <On>
• Press the [CC] turn the Caption on or off.
• The <Caption> feature doesn’t work in <Component>, <HDMI> or <PC> modes.
• <Caption Mode>
You can select the desired caption mode.
• The availability of captions depends on the program being broadcast.
• <Default> -<CC1>~<CC4> -<Text1>~<Text4> (analog channels only)
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
• <Default> - <CC1~CC4> - <Text1~Text4> - <Service1~Service6> (digital channels only)
The Digital Captions function operates on digital channels.
• <Service1~6> in digital caption mode may not be available depending on the broadcast.
• <Digital Caption Options> (digital channels only)
• <Size> - <Font Style> - <Foreground Color> - <Background Color> - <Foreground Opacity> -
<Background Opacity> - <Return to Default>
• The <Digital Caption Options> are only enabled when the <Caption Mode> is <Service 1
~ Service 6>.
(If <Caption Mode> is the default, the <Digital Caption Options> are enabled depending on the broadcast.)
• The availability of captions depends on the program being broadcast.
• <Default> means to follow the standard set by the broadcaster.
• Foreground and Background cannot be set to have the same color.
• <Foreground Opacity> and <Background Opacity> cannot be both set to Transparent.
You can turn the LED on/off on the front of monitor. You can turn it off to save power.
• <Off> : Activates the <Light Effect> (LED) only when a button is pressed.
• <On> : Activates the <Light Effect> (LED) only while watching the TV.
Use to adjust the light level i.e., the brightness of the light.
• <1> ~ <10>
The higher the number, the brighter the light of the LED emits.
3-4 Using the Product
Melody
MENU
Energy Saving
DESCRIPTION
A melody sound can be set to come on when the monitor is powered On or Off.
• <Off> - <Low> - <Medium> - <High>
The <Melody> does not play
• When no sound is output from the TV because the [MUTE] button has been pressed.
• When no sound is output from the TV because the volume has been reduced to minimum with the volume [-] button
• When the TV is turned off by <Sleep Timer> function
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching
TV at night, set the <Energy Saving> mode option to <High> to reduce eye fatigue as well as power consumption.
• <Off> : Turns off the energy saving function.
• <Low> : Sets the TV to low energy saving mode.
• <Medium> : Sets the TV to medium energy saving mode.
• <High> : Sets the TV to high energy saving mode.
• <Auto> : Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Input
MENU
Source List
Edit Name
DESCRIPTION
Use to select <PC>, <TV> or an external input source connected to the Monitor.Use to select the screen of your choice.
You can use the [SOURCE] button on the remote control.
• <PC> - <TV> - <DVI> - <AV> - <Component> - <HDMI>
Name the input device connected to the input jacks to make your input source selection easier.
<VCR> - <DVD> - <Cable STB> - <Satellite STB> - <PVR STB> - <AV Receiver> - < Game> -<Camcorder> - <PC> - <DVI PC> - <DVI> - <TV> - <IPTV> - <Blu-Ray> - <HD DVD> - <DMA>
Using the Product 3-4
Application
MENU
Anynet+ (HDMI-CEC)
DESCRIPTION
What is
<Anynet+>?
<Anynet+> is a function that enables you to control all connected Samsung devices that support
<Anynet+> with your Samsung TV‘s remote. The <Anynet+ > system can be used only with Samsung devices that have the <Anynet+> feature. To be sure your Samsung device has this feature, check if there is an <Anynet+> logo on it.
Connecting Anynet+ Devices
3-4
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding <Anynet+> device using an HDMI cable.
2. Connect the [HDMI IN] jack of the home theatre and the HDMI OUT jack of the corresponding <Anynet+> device using an
HDMI cable.
Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
[DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
<Anynet+> works when the AV device supporting <Anynet+> is in the Standby or On status.
<Anynet+> supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
Using the Product
Setting Up Anynet+
Press the [TOOLS] button to display the Tools menu. You can also display the <Anynet+> menu by selecting
<Tools>→<Anynet+ (HDMI-CEC)>
Setup
MENU DESCRIPTION
Anynet+ (HDMI-CEC) To use the <Anynet+> Function, <Anynet+ (HDMI-CEC)> must be set to On.
Auto Turn Off
When the <Anynet+ (HDMI-CEC) >function is disabled, all the< Anynet+> related operations are deactivated.
Setting an <Anynet+> Device to turn Off automatically when the TV is turned off.
The active source on the TV remote must be set to TV to use the <Anynet+> function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
Device List
1. Press the [TOOLS] button. Press the [ ] button to select <Anynet+ (HDMI-CEC)>.
2. Press the or button to select <Device List>, then press the [ ] button.
- <Anynet+> devices connected to the TV are listed.
Using the Product 3-4
- If you cannot find a device you want, press the red button to scan for devices.
3. Press the or button to select a particular device and press the [ ] button. It is switched to the selected device.
- <Anynet+ (HDMI-CEC)> must be set to On in the <Application> menu for the <Device List> menu to appear.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
If you have selected external input mode by pressing the [SOURCE] button, you cannot use the <Anynet+> function.
Make sure to switch to an <Anynet+> device by using the <Device List>.
Support
3-4 Using the Product
MENU DESCRIPTION
Self Diagnosis
Self Diagnosis
Software Upgrade
• <Picture Test>
If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still exists.
• <Yes> : If the test pattern does not appear or there is noise in the test pattern, select <Yes>.
There may be a problem with the TV. Contact Samsung‘s call center for assistance.
• <No> : If the test pattern is properly displayed, select <No>. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device‘s user manual.
• <Sound Test>
If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV.
• <Yes> : If during the sound test you can hear sound only from one speaker or not at all, select
<Yes>. There may be a problem with the TV. Contact Samsung’s call center for assistance.
• <No> : If you can hear sound from the speakers, select <No>. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.
• If you hear no sound from the TV‘s speakers, before performing the sound test, make sure <Speaker Select > is set to <TV speaker> in the <Sound> menu.
• The melody will be heard during the test even if <Speaker Select> is set to <External
Speaker> or the sound is muted by pressing the [MUTE] button.
• <Signal Information (digital channels only)>
Unlike analog channels, which can vary in reception quality from snowy to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.
Samsung may offer upgrades for TV’s firmware in the future. Please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the [SER-
VICE] port located on your TV.
• Insert a USB drive containing the firmware upgrade into the [SERVICE] port on the side of the TV.
• Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default
(factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
HD Connection Guide This menu presents the connection method that provides the optimal quality for the HDTV. Refer to this information when connecting external devices to the TV.
Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call center, product and software file download method.
Using the Product 3-4
3-5 Installing the Device Driver
If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics website (www.samsung.com), and download the driver.
1.
Insert the driver installation CD into the CD-ROM drive.
2.
Click on Windows Driver.
3.
Select the model of your product from the model list.
4.
Complete the remaining installation steps according to the instructions displayed on the screen.
5.
Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system.
3-5 Using the Product
3-6 Standard Signal Mode Table
An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
Using the Product 3-6
RESOLUTION
IBM, 640 x 350
IBM, 640 x 480
IBM, 720 x 400
MAC, 640 x 480
MAC, 832 x 624
MAC, 1152 x 870
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 X 800
VESA, 1280 X 960
VESA, 1280 X 1024
VESA, 1280 X 1024
VESA, 1440 x 900
VESA, 1600 x 1200
VESA, 1680 x 1050
VESA, 1920 x 1080 (RB)
(P2770HD)
VESA,1920 x 1080
(P2370HD, P2570HD)
HORIZONTAL
FREQUENCY
(KHZ)
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
31.469
31.469
31.469
35.000
49.726
68.681
37.861
67.500
49.702
60.000
63.981
79.976
55.935
75.000
65.290
66.587
67.500
VERTICAL
FREQUENCY
(HZ)
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
70.086
59.940
70.087
66.667
74.551
75.062
72.809
75.000
59.810
60.000
60.020
75.025
59.887
60.000
59.954
59.934
60.000
CLOCK
FREQUENCY
(MHZ)
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
25.175
25.175
28.322
30.240
57.284
100.000
31.500
108.000
83.500
108.000
108.000
135.000
106.500
162.000
146.250
138.500
148.500
POLARITY (H/V)
+/+
-/-
-/-
+/+
-/-
+/+
+/+
+/+
-/-
-/-
-/-
-/-
+/-
-/-
-/+
+/+
-/+
+/+
-/+
+/-
+/+
-/+
+/+
+/+
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-6 Using the Product
4 Installing the Software
4-1 Natural Color
What is Natural Color ?
This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely match the colors of printed pictures. For more information, refer to the online help of the software (F1).
Natural Color is provided online. You can download it from the website below and install; http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
Installing the Software 4-1
4-2 MultiScreen
What is MultiScreen ?
MultiScreen enables you to partition multiple sections on the Monitor.
Installing the Software
1.
Insert the installation CD into the CD-ROM drive.
2.
Select the MultiScreen setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
3.
When the Installation Wizard appears, click [Next].
4.
Complete the remaining software installation steps according to the instructions displayed on the screen.
• The software may not work properly if you do not restart the computer after the installation.
• The MultiScreen icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
MultiScreen Installation Requirements
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.
Operating System
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista
For MultiScreen, Windows 2000 or later operating systems are recommended.
Hardware
• At least 32MB of memory
• At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select MultiScreen from the program list and click the [Add/Delete] button.
4-2 Installing the Software
5 Troubleshooting
5-1 Monitor Self-Diagnosis
• You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below.
1.
Turn the product and the PC off.
2.
Remove the D-Sub cable from the product.
3.
Turn the product on.
4.
If the product is working properly, the <Check Signal Cable> message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection.
Troubleshooting 5-1
5-2 Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
The monitor screen flickers.
Picture image is unstable and vibrates.
Ghost images are shown in the picture.
Screen is blank and the power indicator light blinks every 0.5 or 1 seconds
PROBLEMS RELATED TO INSTALLATION (PC MODE)
Check if the signal cable between the computer and the monitor is securely connected and tightened.
(Refer to Connecting to a Computer)
PROBLEMS RELATED TO SCREEN
Screen is blank and power indicator is off.
<Check Signal Cable> message
<Not Optimum Mode> message
Picture rolls vertically.
Image is not clear. Picture is blurred.
The image is too light or too dark
The screen is blank and is blinking.
Ensure that the power cord is firmly connected and the LCD monitor is on.
(Refer to Connecting to a Computer)
Ensure that the signal cable is firmly connected to the PC or video sources.
(Refer to Connecting to a Computer)
Check the maximum resolution and the frequency of the video adapter.
Compare these values with the data in the Preset Timing Modes Chart.
Check if the signal cable is securely connected.Connect it again securely.
(Refer to Connecting to a Computer)
Run Frequency <Coarse > and < Fine> tuning.
Turn on again after removing all accessories(video extension cable, etc.)
Set resolution and frequency to the recommended ranges.
Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current <Information> under the monitor menu and Standard Signal Mode
Table.
Adjust the <Brightness> and <Contrast>
(Refer to the <Brightness>, <Contrast>)
The monitor is using its power management system
Press a key on the keyboard
If you see the <TEST GOOD>message on the screen when you press the
[ MENU] button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected.
No sound
The sound level is too low.
PROBLEMS RELATED TO AUDIO
Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.
(Refer to Connecting to a Computer)
Check the volume level.
Check the volume level.
If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
PROBLEMS RELATED TO REMOTE CONTROL
The remote control buttons do not respond.
Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the vicinity
5-2 Troubleshooting
NOTE ON THE PRODUCT APPEARANCE
You may see small particles if you look closely at the edge of the bezel surrounding the screen.
This is part of the product's design and is not a defect.
Troubleshooting 5-2
5-3 FAQ
FAQ PLEASE TRY THE FOLLOWING!
How can I change the frequency of the video signal?
How can I change the resolution?
How can I use the power saving function?
How can I clean the outer case/LCD Panel?
What is the difference between HDTV and
SDTV?
Can I watch HD broadcasting with all digital
TVs?
Can I watch digital TV broadcasting with an analog TV?
Can I use my present antenna to receive digital broadcasting?
You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the computer or the graphics card.)
Windows XP: Change the resolution by selecting Control Panel →Appearance and Themes→Display→Settings.
Windows ME/2000 : Change the resolution by selecting Control Panel
→Appearance and Themes→Display→Settings.
(For more information, refer to the User Manual of the computer or the graphics card.)
Windows XP: Configure it by selecting Control Panel→Appearance and
Themes→Display→Screen Saver Setting or configure it in the BIOS
SETUP of the computer.
Windows ME/2000 : Configure it by selecting Control Panel→Appearance and Themes→Display→Screen Saver Setting or configure it in the BIOS
SETUP of the computer.
For more information, refer to the Windows user manual for the computer.
Disconnect the power cord and then clean the monitor with a soft, dry or slightly damp cloth.
Do not leave any detergent or scratches on the case.
Do not let any water enter the monitor.
There are various types of digital TVs.
The most widely known types of digital TV are HDTV and SDTV. They are classified according to the screen quality and the video specifications.
• HDTV (High Definition TV):High screen quality.
• SDTV (Standard Definition TV):Common standard digital TV.
An SDTV has an aspect ratio of 4:3 which is the same as that of an analog
TV. HDTV has an aspect ratio of 16:9 which is similar to a cinema screen.
This provides a much better screen quality than SDTV.
Digital TV broadcasting in our country is ultimately orientated towards
HDTV. (At present, all digital TVs from Samsung Electronics have the 16:9 wide aspect ratio.)
You can receive all digital broadcasts, whether they are SD or HD, using any digital TV. However, you cannot enjoy HD programs, which are the highest quality digital TV programs, using an SD digital TV.
(At present, all digital TVs from Samsung Electronics have the 16:9 wide aspect ratio.)
No.
The analog TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital TV broadcasting.
As for existing analog TV, digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas.
If signal reception is very good in your environment, you can watch digital broadcasts with your existing indoor antenna. If not, it is better to install an outdoor antenna.
5-3 Troubleshooting
6 More Information
6-1 Specifications
MODEL NAME
LCD Panel
Synchronization
Color
Resolution
Screen Size
Display Area
Pixel Pitch
Horizontal
Vertical
P2370HD
P2570HD
23 inches (58 cm)
509.76 mm (H) X 286.74 mm (V) ( 20.06 inches X
11.29 inches)
0.2655 mm (H) X 0.2655 mm (V) (0.01 inches X 0.01 inches)
30~81 kHz
56~75 Hz
16.7M
1920x1080 @ 60 Hz
24.6 inches (62 cm)
543.46 mm (H) X 305.69 mm (V) ( 21.40 inches X
12.04 inches)
0.283 mm (H) X 0.283 mm
(V) (0.01 inches X 0.01 inches)
Optimal Resolution
Maximum Resolution
1920x1080 @ 60 Hz
Input Signal, Terminated
Maximum Pixel Clock
Power Voltage
Dimension (Width x Height x
Depth) / Weight
VESA Mounting Interface
Environmental considerations
Tilt
Operating
Storage
P2770HD
27 inches (68 cm)
597.89 mm (H) X 336.31 mm (V) ( 23.5 inches X 13.2 inches)
0.3114 mm (H) X 0.3114 mm (V) (0.01 inches X 0.01 inches)
1920x1080 @ 60 Hz (RB)
1920x1080 @ 60 Hz (RB)
RGB analog, DVI (Digital
Visual Interface) compatible digital RGB
0.7 Vp-p ± 5 %
Separate Type H/V Sync,
Composite
TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)
162.000MHz (Analog,Digital)
RGB analog, DVI (Digital
Visual Interface)
0.7 Vp-p ± 5 %
Separate Type H/V Sync,
Composite
TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
571 x 364.6 x 65.5 mm
(22.5 x 14.4 x 2.6 inches)
(Without Stand)
571 x 432.5 x 189.5 mm
(22.5 x 17 x 7.5 inches)
(With Stand) / 5.8 kg (12.8
Ibs)
605 x 384 x 66 mm (23.8 x
15.1 x 2.6 inches) (Without
Stand) / 6.3 kg (13.9 Ibs)
605 x 453 x 240 mm (23.8 x
17.8 x 9.4 inches) (With
Stand) / 7 kg (15.4 Ibs)
75 mm x 75 mm
(2.95 x 2.95 inches)
100 mm x 100 mm
(3.94 x 3.94 inches)
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
-2° ~ 22°
RGB analog, DVI (Digital
Visual Interface)
0.7 Vp-p ± 5 %
Separate Type H/V Sync,
Composite
TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)
667 x 422 x 66 mm ( 26.3 x
16.6 x 2.6 inches) (Without
Stand) / 7.4 kg ( 16.3 Ibs)
667 x 484 x 244 mm (26.3 x
19.1 x 9.6 inches) (With
Stand) / 8.2 kg ( 18.1 Ibs)
100 mm x 100 mm
(3.94 x 3.94 inches)
More Information 6-1
Class B (Information Communication Equipment for Home Use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
6-1 More Information
6-2 Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a different color to indicate that the product is in power saving mode.
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides the power saving function.
POWER SAVING
FUNCTION
Power LED
P2370HD
Power Consumption
P2570HD
P2770HD
NORMAL OPERATION
On
51 watts
59 watts
58 watts
POWER SAVING MODE
Blinks less than 2 watts
POWER OFF (POWER
BUTTON)
Off less than 1 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
More Information 6-2
6-3 Contact SAMSUNG WORLDWIDE
• If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
U.S.A
CANADA
MEXICO
NORTH AMERICA
1-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864) http://www.samsung.com/us http://www.samsung.com/ca http://www.samsung.com/mx
ARGENTINA
BRAZIL
CHILE
COLOMBIA
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
AUSTRIA
BELGIUM
CZECH REPUBLIC
LATIN AMERICA
0800-333-3733
0800-124-421
4004-0000 http://www.samsung.com/ar http://www.samsung.com/br
800-SAMSUNG(726-7864)
01-8000112112
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013 http://www.samsung.com/cl http://www.samsung.com/co http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin
800-7919267 http://www.samsung.com/latin
1-800-234-7267 http://www.samsung.com/latin
00-1800-5077267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303 http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin
EUROPE
0810 - SAMSUNG(7267864,€ 0.07/min) http://www.samsung.com/at
02 201 2418
800 - SAMSUNG (800-726786) http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr
(French) http://www.samsung.com/cz
DENMARK
EIRE
FINLAND
FRANCE
6-3
8 - SAMSUNG (7267864)
0818 717 100
30 - 6227 515
01 4863 0000 http://www.samsung.com/dk http://www.samsung.com/ie http://www.samsung.com/fi http://www.samsung.com/fr
More Information
BELARUS
ESTONIA
LATVIA
LITHUANIA
MOLDOVA
KAZAKHSTAN
KYRGYZSTAN
RUSSIA
TADJIKISTAN
UKRAINE
UZBEKISTAN
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
U.K
AUSTRALIA
CHINA
HONG KONG
INDIA
More Information
EUROPE
01805 - SAMSUNG (7267864,€ 0.14/
Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
02 261 03 710
0900 - SAMSUNG (0900-7267864) (€
0,10/Min)
3 - SAMSUNG (7267864)
0 801 1SAMSUNG (172678)
022 - 607 - 93 - 33
808 20 - SAMSUNG (7267864)
0800-SAMSUNG(726-7864)
902 - 1 - SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0848-SAMSUNG(7267864, CHF 0.08/ min)
0845 SAMSUNG (7267864)
CIS
810-800-500-55-500
800-7267
8000-7267
8-800-77777
00-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-800-555-55-55
8-10-800-500-55-500
8-800-502-0000 http://www.samsung.de
http://www.samsung.com/hu http://www.samsung.com/it http://www.samsung.com/lu http://www.samsung.com/nl http://www.samsung.com/no http://www.samsung.com/pl http://www.samsung.com/pt http://www.samsung.com/sk http://www.samsung.com/es http://www.samsung.com/se http://www.samsung.com/ch http://www.samsung.com/uk http://www.samsung.com/ee http://www.samsung.com/lv http://www.samsung.com/lt http://www.samsung.com/kz_ru http://www.samsung.ru
http:// www.samsung.com/ua http://www.samsung.com/ua_ru http://www.samsung.com/kz_ru 8-10-800-500-55-500
ASIA PACIFIC
1300 362 603
400-810-5858
010-6475 1880
3698 - 4698 http://www.samsung.com/au http://www.samsung.com/cn http://www.samsung.com/hk http://www.samsung.com/hk_en/ http://www.samsung.com/in 3030 8282
1-800-3000-8282
1800 110011
6-3
INDONESIA
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
TURKEY
U.A.E
ASIA PACIFIC
0800-112-8888
0120-327-527
1800-88-9999
0800 SAMSUNG (0800 726 786)
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
MIDDLE EAST & AFRICA
0860-SAMSUNG(726-7864)
444 77 11
800-SAMSUNG(726-7864)
8000-4726 http://www.samsung.com/id http://www.samsung.com/jp http://www.samsung.com/my http://www.samsung.com/nz http://www.samsung.com/ph http://www.samsung.com/sg http://www.samsung.com/th http://www.samsung.com/tw http://www.samsung.com/vn http://www.samsung.com/za http://www.samsung.com/tr http://www.samsung.com/ae
6-3 More Information
advertisement
Key Features
- 68.6 cm (27")
- Full HD 1920 x 1080 pixels 16:9
- 5 ms 300 cd/m² 1000:1
- 62 W
Related manuals
advertisement