advertisement
BX53 is the environmental conscious products according to OLYMPUS's own standards.
Main features of OLYMPUS Eco-products are as follows.
• Lead-free and arsenic-free Eco-glass for optics, such as lenses and prisms.
• Exclusion of hexavalent chrome, mercury, lead and cadmium from metal materials and surface
treatment of metal.
• Exclusion of lead solders.
• Adoption of cardboard for packing materials without styrene foam for promoting the recycling.
* A definition of exclusion depends on OLYMPUS standard. Some accessories are inapplicable.
Please visit our web site for further information: http://www.olympus.co.jp/en/eco-products/
Images are courtesy of:
Dr. Shigeo Hayashi, Dr. Kagayaki Kato, Dr. Reiko Tajiri and Mr. Hosei Wada
Laboratory for Morphogenetic Signaling
RIKEN Center for Developmental Biology (P.12, P.15 top right, P.16 top left)
Shigenobu Yonemura, Ph.D.
Electron Microscope Laboratory
RIKEN Center for Developmental Biology
(P.6 lower right, P.7, P.15 lower right, P.17 Phase contrast, P.19 top right)
Guojun Sheng, Ph.D., Yukiko Nakaya, Ph.D.
Laboratory for Early Embryogenesis
RIKEN Center for Developmental Biology (P.2, P.15 lower left, P.16 lower left)
Prof. Tadokoro, Pathology class, School of medicine, St. Marianna University (P.15)
Fumio Matsuzaki, Ph.D., Daijiro Konno, Ph.D.
Photos courtesy of:
Laboratory for Cell Asymmetry
RIKEN Center for Developmental Biology (P.6 lower left, P.15 top left, P.16 top right)
The Tokyo University (P.11 below) Junko Kyozuka, Associate Professor
Graduate School of Agricultural and Life Sciences
The Tokyo University (P.16 lower right)
Junko Kyozuka, Associate Professor, Graduate School of Agricultural and Life Sciences,
Prof. Nakatani, Biochemistry course, School of medicine, Showa University (P.13 above)
• OLYMPUS CORPORATION is ISO14001 certified.
• OLYMPUS CORPORATION is FM553994/ISO9001 certified.
• OLYMPUS CORPORATION is MD540624/ISO13485 certified.
• Illumination devices for microscope have suggested lifetimes.
Periodic inspections are required. Please visit our web site for details.
• All company and product names are registered trademarks and/or trademarks of their respective
owners.
• Images on the PC monitors are simulated.
• Specifications and appearances are subject to change without any notice or obligation on the part of
the manufacturer.
Printed in Japan M1697E-0310B
A Clear Edge in Imaging
System Microscope
BX63/BX53
BX3 Series
1
A Revolutionary New Standard in Accuracy and Imaging Efficiency
User-friendly design assures outstanding operating ease and flexibility for brightfield/darkfield and fluorescence imaging in a wide range of research settings. With a choice of models and configuration options, there's an
Olympus research microscope to meet your individual needs.
2
3
Accuracy & Ease of Use
Advanced Sensitivity in Fluorescence Imaging
Accuracy
DM595
BA600to assure a high S/N ratio.
U-FUW
100
90
80
70
60
50
40
30
20
10
0
300 350 400 450 500
Wavelength (nm)
550 600
U-FMCHE
100
90
80
70
60
50
40
30
20
10
0
500 550 600 650 700
Wavelength (nm)
750 800
DM410
BA420IF
BP340-
390
Fluorescent Mirror Units with the Latest Coating Technology
Olympus applies an outstanding filter coating technology to all fluorescence mirror units in order to produce high transmissions, sharp cut-offs and efficient detections of fluorescence.
Fluorescence light for observation
Light source
Emission filter
Dichromatic mirror
Excitation filter
Stray light
Low reflection function
Excitation light:
Illumination light
Objective
Specimen
Stray Light Reduction Equipped on
All Mirror Units
The low reflection function eliminates over
99% of stray light, producing a high S/N ratio.
Surface of Fly’s-eye Lens,
Enlarged Image
New Fluorescence Illuminators with Fly’s-eye Lens
Fluorescence illuminators BX3-RFAA and
BX3-RFAS equipped with a Fly’s-eye lens provide uniform illumination. Even, uniform fluorescence illumination facilitates postimaging enhancements and processing.
High Transmission Objectives with
Reduced Autofluorescence
Olympus UIS2 objectives are made with superior low-autofluorescence glass, antireflection coats, and lens joining materials, improving the S/N ratio. Effective detections of subtle fluorescence emissions even with weak excitation light deliver ideal performance in fluorescence imaging.
Condenser Design to Reduce
Back-reflections
The motorized universal condenser is designed to reduce back-reflections and autofluorescence by swinging its top lens out, automatically closing its diaphragm to the minimum, and locating the wheel in between two positions.
Motorized Sensors with Power-off
Functions
The sensor for the motorized fluorescence illuminator BX3-RFAA turns the light on only upon mirror unit changeover commands, and turns it off as soon as the command is completed. This function assures that stray light from the sensor is terminated during observation.
Low Autofluorescence Immersion Oil
This immersion oil is specifically designed to reduce the autofluorescence improved S/N ratio. Insusceptible to crystallization, it is an ideal oil for long time observations.
normally associated with such oils, for
4
5
Reliability and Precision in an Easy-to-use Package
Upgraded Accuracy
The BX63 microscope features a fixed stage and focusing nosepiece for maximum stability and accurate imaging.
An ultrasonic drive system enables fine, smooth control of specimen position.
Accuracy & Ease of Use
Effortless Imaging
The cellSens software allows researchers to perform effortless imaging.
Accuracy Ease of Use
Brain section of mouse at embryonic day 15 (Cy3) NRK-52E cells (Alexa Fluor 488/Alexa Fluor 546)
Further Fluency in Fluorescence
Integration
The Olympus 8-position fluorescence illuminator allows flexible responses to various fluorescence specimens, with easily replaceable mirror units.
Observations are accelerated further with less need for changing mirror units for specimens such as multicolors and FISH.
6
BX63
Intelligent Design for Maximum
Configuration Flexibility and Operating Ease
The BX63 offers outstanding stability and imaging precision for research applications, with the convenience of a touch screen interface for easy operation. Additionally, it features a detachable controller that can be positioned to suit the operator's preference or workflow requirements.
Accuracy & Ease of Use BX63
Stability for Improved Imaging Reliability
The Olympus BX63 is the choice for today’s motorized microscope.
By incorporating a motorized nosepiece and securely fastening the stage on three points, the microscope is even more stabilized.
The smooth, high-precision drive of the fixed ultrasonic stage reduces vibrations, further advancing the quality of image acquisition.
Displacement
Large
Small
BX61 BX63
Stability Simulation in Comparison to BX61
Intelligent Microscope BX63 +
Digital Camera DP72
7
Intuitive Touch Panel Controller for Enhanced Workspace and
Workflow Flexibility
Programmable controls greatly simplify repetitive observation and imaging tasks.
In Navigation mode, the interface is context-sensitive, and displays only the functions that are relevant to the currently selected observation method.
In Full Operation mode, it allows researchers access to the full range of functions and customization options available.
The Detachable Controller Customizes Workspace into an Efficient Microscope Workstation
The controller U-MCZ can be removed and attached anywhere on the microscope, enabling the researcher to create a working environment all his/her own.
The XY-controller of the ultrasonic stage can also be attached to the user’s preferred side, allowing the simultaneous operation of the controller and the mouse.
The controller’s functionally-placed switches simplify observation method/objective/ mirror unit changeovers, light intensity adjustments and live/archive image selections.
Touch Panel Controller
U-MCZ
+BX3-SSU Ultrasonic Stage XY-controller
Configuration
8
Motorized Units Facilitate Operations
With the BX63, a diverse lineup of motorized units are available.
The researcher has a choice of three controls—the touch panel controller, the controller/U-MCZ, or the imaging software cellSens—for his/her observation method settings, microscopic operations and digital imaging. Observations are made so much faster and simpler, thanks to the interlocked motorized units working together to satisfy even the most demanding applications.
Accuracy & Ease of Use BX63
Motorized Fluorescence Illuminator/
BX3-RFAA
The flexibility of the motorized fluorescence illuminator accommodates multi-color stained specimens.
The 8-position mirror units permit quick changeover of fluorescence colors.
Motorized Attenuator Wheel/U-AW
The Olympus BX63 has a motorized ND filter wheel for fluorescence and transmitted light intensity adjustments.
* Special adapters are required for mounting (U-LHEAD for fluorescence, and U-LH100ADP for transmitted light).
Motorized Seven Position Nosepiece/
U-D7REA
Equipped with a DIC slider slot, this revolving nosepiece allows simultaneous attachment of seven objectives. It is especially suitable for continuous observations from low to high magnifications and combining specific objectives, such as polarized light observations.
9
Touch Panel Controller
Controller/U-MCZ
Software cellSens
Microscope Frame Equipped with
Motorized Focus and Field Diaphragm
This unit incorporates a high-speed, highprecision motorized focusing nosepiece with
0.01 µm resolution and 20 mm vertical strokes. The field diaphragm adjustment of transmitted light is also motorized.
Motorized Universal Condenser/
BX3-UCD8A
By integrating with designated optical components, the motorized universal condenser accommodates various kinds of transmitted light observation, from brightfield to differential interference contrast and phase contrast.
Scanning Stage with Ultrasonic/
BX3-SSU
The ultrasonic stage delivers high-precision
XY control. The XY-controller can be mounted on the controller/U-MCZ for the
BX63 and worked like conventional stage handles.
10
BX53
A Great Solution for System Flexibility with Comfortable Operability
The BX53 is a versatile system microscope that can be configured to meet virtually any research need. It supports a wide range of fluorescence imaging applications, and has a range of advanced features for enhanced operating ease and process flexibility.
System Microscope BX53 +
Digital Camera DP72
11
Accuracy & Ease of Use BX53
Customizable Control Layout
Light intensity now can be controlled with the dial in front, and transmitted filters and fluorescence shutters are operable from either side. Detachable fine focus handle can be attached on either side of the microscope based on operator preference. The BX53 frees the operator to create his/her own working environment with the microscope.
Further Ease in Imaging with
Multi-stained Specimens
The 8-position fluorescence illuminator allows flexible responses to various fluorescence specimens.
Mirror units can easily be replaced.
Automatic Switching of DIC Prisms
Switching objectives on the motorized 7-position revolving nosepiece, integrated with the motorized universal condenser, enables an automatic switch to the optimal DIC prism. Simplified prism switches accelerate observations.
Saves Microscope Information with Coded Units
The imaging software cellSens integrated with the coded fluorescence illuminator BX3-RFAS and the motorized 7-position nosepiece U-D7RES can automatically store fluorescence mirror unit and objective data with the images, facilitating post-imaging treatments.
Objective Data Mirror Unit Data Captured Image
Imaging Software
Changing Objectives with Coded
Nosepiece, Automatic Switchovers of
DIC Elements
Energy Saving Switch Turns off
Automatically
The motion sensor detects when an operator leaves and will automatically turn off the transmitted light lamp after around 30 minutes. The energysaving switch conserves energy and lamp lifetime.
Optimum Contrast Observation
System Microscope BX53
12
UIS2 Objectives Deliver Optimal Performance in Wider Wavelength Spectrum
■ UPLSAPO Series
Thanks to the application of the original Olympus UW multi-coatings, these Super
Apochromat objectives compensate for both spherical and chromatic aberrations from the UV to the near infrared region. Their sensitivity to fluorescence emissions ensures the acquisition of sharp, clear images, without color shift, even in brightfield and Nomarski DIC observations. For quality and performance, they offer solutions for digital imaging needs.
■
PLAPON Series
Designed for unsurpassed resolution and contrast, these Plan Apochromat objectives keep chromatic aberration down to a minimum.
The PLAPON60XOSC objective has two improvements, chromatic aberration compensation at 405 nm–650 nm and image-forming performance at 405 nm.
13
■ UPLFLN (UPLFLN-PH)
Series
These plan objectives also provide flat images with high transmission up to the near infrared region of the spectrum. With their high
S/N ratio, excellent resolution and high contrast imaging, they are especially effective in brightfield and Nomarski DIC observations. The UPLFLN-PH series is optimized for phase contrast observation.
■
PLN(PLN-PH) Series
Ideal for a range of biological applications, these high quality objectives feature excellent flatness up to F.N.
22 in transmitted brightfield
(phase contrast) observation.
The PLN-PH series is specifically designed for phase contrast work.
UIS2 objectives
Objective
UPLSAPO 4X 0.16
UPLSAPO 10X2 0.4
13
3.1
26.5
—
26.5
0.17
UPLSAPO 20X 0.75
0.6
26.5
0.17
UPLSAPO 20XO 0.85
0.17
26.5
— Oil
UPLSAPO 40X2 0.95
0.18
26.5
0.11-0.23
UPLSAPO 60XW 1.20
0.28
26.5
0.15-0.21
Water
UPLSAPO 60XO
UPLSAPO 100XO
N.A.
1.35
1.40
PLAPON 1.25X
0.04
PLAPON 2X 0.08
W.D.
(mm)
0.15
0.13
5
6.2
F.N.
26.5
26.5
26.5
26.5
Cover glass Immerthickness sion
(mm)
Spring
0.17
0.17
—
—
Oil
Oil
_
_
_
_
_
_
PLAPON 60XO 1.42
0.15
26.5
0.17
PLAPON 60XOSC 1.4
0.12
22 0.17
UPLFLN 4X 0.13
17 26.5
—
Oil
Oil
_
_
UPLFLN 10X2 0.3
UPLFLN 20X 0.5
10
2.1
26.5
—
26.5
0.17
UPLFLN 40X 0.75
0.51
26.5
0.17
UPLFLN 40XO 1.3
0.2
26.5
0.17
UPLFLN 60X 0.9
0.2
26.5
0.11-0.23
UPLFLN 60XOI 1.25-0.65
0.12
26.5
0.17
UPLFLN 100XO2 1.3
0.2
UPLFLN 100XOI2 1.3-0.6
0.2
26.5
26.5
0.17
0.17
UPLFLN 10X2PH 0.3
UPLFLN 20XPH 0.5
10
2.1
26.5
—
26.5
0.17
UPLFLN 40XPH 0.75
0.51
26.5
0.17
UPLFLN 60XOIPH 1.25-0.65
0.12
26.5
0.17
UPLFLN 100XO2PH 1.3
UPLFLN 4XP 0.13
UPLFLN 10XP 0.3
UPLFLN 20XP 0.5
0.2
17
10
2.1
26.5
26.5
26.5
0.17
—
—
26.5
0.17
UPLFLN 40XP 0.75
0.51
26.5
0.17
UPLFLN 100XOP 1.3
0.2
26.5
0.17
Oil
Oil
Oil
Oil
Oil
Oil
Oil
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Correction ring
Iris diaphragm
Water proof and oil proof function
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Objective N.A.
W.D.
(mm)
F.N.
PLN 2X
PLN 4X
PLN 10X
PLN 20X
0.06
0.1
0.25
0.4
PLN 40X 0.65
0.6
PLN 50XOI 0.9-0.5
0.2
PLN 100XO
PLN 10XPH
1.25
0.25
0.15
10.6
5.8
18.5
10.6
1.2
PLN 20XPH
PLN 40XPH
0.4
0.65
PLN 100XOPH 1.25
PLN 4XP 0.1
ACHN 10XP 0.25
1.2
0.6
0.15
18.5
6
ACHN 20XP
ACHN 40XP
0.4
0.65
ACHN 100XOP 1.25
3
0.45
0.13
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
MPLAPON100X 0.95 0.3
MPLAPON100XO 1.40 0.1
26.5
26.5
MPLFLN2.5X
0.08 10.7
26.5
0.17
0.17
—
—
—
0.17
—
—
—
Cover glass Immerthickness sion
(mm)
Spring
—
—
—
0.17
_
_
Oil
Oil
Oil
_
_
_
_
_
0.17
0.17
— Oil
_
_
0
0
—
Oil
MPLFLN10X 0.30 11
MPLFLN20X 0.45 3.1
26.5
26.5
—
0
MPLFLN40X 0.75 0.63 26.5 0
MPLFLN100X 0.90 1
MPLN5X 0.10 20
26.5
22
0
—
UAPON20XW340 0.70 0.35
UAPON40XO340 1.35 0.1
22
22
0.17
0.17
Water
Oil
UAPON40XW340 1.15 0.25
22 0.13-0.25
Water
All UIS2 objectives and WHN eyepieces: lead-free eco-glass
UIS objective
Objective
PLFL 100X
N.A.
0.95
W.D.
(mm)
0.2
_
_
_
F.N.
Cover glass Immerthickness sion
(mm)
26.5
0.14-0.2
Spring
_
Correction ring
Iris diaphragm
Water proof and oil proof function
_
Correction ring
_
_
Iris diaphragm
_
_
_
_
_
_
_
_
Oil proof cap
Observation Tubes / Eyepoint Adjusters
A wide range of observation tubes is available for the BX3 series, including wide field binocular and trinocular types, various tilting tubes, and tubes for observation of upright images in which the specimen and the observed image move in the same direction.
q w u y
!0
qU-TTBI/U-ETBI wU-TTLBI eU-TTR-2 rU-SWETR tU-SWETTR-5 yU-BI30-2 uU-TBI-3 iU-TR30-2/U-TR30NIR oU-SWTR-3 !0U-TBI-3-CLI !1U-ETR-4 !2U-EPA2 !3U-EPAL-2
Eyepieces
Eyepieces maintain image flatness even when a reflected light illuminator or other intermediate tube is attached. The two available types are F.N. 22 and F.N. 26.5.
Eyepiece specifications
Item
Widefield
Name
WHN10X
WHN10X-H
CROSSWHN10X
Super widefield SWH10x-H
MICROSWH10X
CROSSSWH10X
F.N.
22
22
22
26.5
26.5
26.5
Diopter
-8 — +5
-8 — +5
-8 — +2
-8 — +2
-8 — +2
Micrometer (ømm)
24
24
— i
!1
e o r
!2
!3
t
14
World-renowned Optical Performance Accommodates
Various Observation Styles
Fluorescence
Olympus Takes Fluorescence Observation to Another Plane
Nomarski DIC
Image Optimization According to Specimen Characteristics
Brain section of mouse at embryonic day 15 (GFP) Tracheal primordia of Drosophila embryo (GFP) Distal Tip of a Drosophila limb (GFP) Brain section of mouse at embryonic day 15
Gastrulation stage chicken embryo (DAPI/Alexa Fluor 488/Alexa Fluor 594) NRK-52E cells (Alexa Fluor 488/Alexa Fluor 546)
A total of three types of reflected illuminators are available, the motorized fluorescence illuminator BX3-RFAA, the coded fluorescence illuminator BX3-RFAS, and the universal reflected illuminator BX3-URA.
Eight fluorescence mirror units can be attached for comfortable multi-color fluorescence observations. Fly’s-eye lenses, that are equipped with both BX3-RFAA and BX3-RFAS, and highperformance filters that come with mirror units realize bright, efficient fluorescence observations. Storing fluorescence mirror unit data
(used in imaging) together with the images is possible by integrating coded fluorescence illuminator and motorized fluorescence
Illuminator.
BX3-URA
BX3-RFAS
BX3-RFAA
15
Blood island at stage 12 of chicken development
BX3-UCD8A
A shoot apical meristem of rice
U-CO1.25x
U-TLD U-TLO
U-UCD8-2
Olympus has prepared a wider selection of DIC sliders with varied shearing value for acquiring optimal specimen images. The U-DICT and the U-DICTS are designed for all-round performance. The
U-DICTHC optimizes high-contrast observations of thin specimens, and the U-DICTHR, high resolution with less glare for thick specimens.
Two types of condensers are also available: the 8-position universal condenser U-UCD8-2 and the motorized universal condenser
BX3-UCD8A, both for various observations (brightfield, darkfield, phase contrast, DIC and simple polarized light).
q w e r qU-DICT wU-DICTS eU-DICTHR rU-DICTHC
16
Brightfield
Brighter Images, with Superb Resolution/flatness at All Magnifications
A diverse condenser lineup includes the achromatic aplanatic
U-AAC, delivering excellent resolution and flatness from low to high magnifications, the swing-out U-SC3 accommodating 1.25x to 100x, the low magnification U-LC for w r continuous 2x to 100x (Dry) observations, and the ultra low magnification U-ULC-2.
q e t qU-SC3 wU-ULC-2 eU-AC2 rU-AAC tU-LC Cerebrum (Bodian Stain)
Liver (Azan Stain) Pancreas (HE Stain)
Phase Contrast
Ideal Phase Contrast Observation with Excellent
Image Clarity
High contrast phase imaging allows close observation of the cell interior and of live bacteria. Using UPLFLN-PH or PLN-PH series objectives, phase contrast observation from 10x up to 100x is achievable. With the U-PCD2 phase/darkfield condenser, users can view specimens in brightfield or darkfield. Simultaneous observation with reflected light fluorescence microscopy is also possible.
U-PCD2
NRK-52E cells
NRK-52E cells
17
NRK-52E cells
Polarized Light
Polarizing Observation for Wide-area Retardation
Measurement
Tooth, bone, muscle tissue, nerve tissue, actomyosin fiber and mitotic spindle can all be observed, without staining. There are intermediate attachments (U-OPA/U-CPA) for orthoscopic and orthoscopic/conoscopic viewing.
Various compensators make it w t possible to observe a wide range of retardation. Also available is a q condenser exclusively for polarization observation, revolving nosepiece, r rotating stage, objectives and simple polarizing attachment.
e qU-POC-2 wU-CPA eU-OPA rU-AN360P-2 tU-P4RE
Amyloid
Asbestos Urate crystals
Darkfield
High-quality Darkfield Effect at All Magnifications
Two darkfield condensers are provided: the dry darkfield condenser
(U-DCD), for magnifications from 10x to 100x (up to N.A. 0.80); and the oil immersion darkfield condenser (U-DCW), for magnifications from 20x to 100x (up to N.A. 1.2).
* Please consult your nearest Olympus representative for applicable objectives.
U-DCD U-DCW
Spirogyra
Water flea
18
Microscope Digital Cameras to Fulfill Diverse Needs
DP72
High-speed, High-definition Image Capture Provides Smooth Fluorescence Imaging
Thanks to its high-speed hardware, the DP72 can capture highresolution images equivalent to 12.8 million pixels* in around 2.5
seconds. The camera's high sensitivity and low noise (equivalent to the level of ISO 1600) ensure clear fluorescence imaging, while the resolution quality allows precise representation of particular specimen areas.
*By shifting the pixels of the 1.45 million pixel 2/3 inch CCD (one pixel = 6.45 um), it is possible to record still images equivalent to the maximum image recording size (4140 x 3096) or effective image size of 12.8 million pixels.
DP25
High-definition, High-resolution 5-million Pixel Technology
The DP25 provides live display at a high frame rate of 8 fps with exceptional quality of 2560 x 1920 pixels. In addition, the DP25 is equipped with a color profile that provides full-color images in realtime, allowing true color reproduction of specimens. It can easily be connected with just one cable (6-pin) to a PC with a FireWire
(IEEE1394) port. It can also connect to a laptop PC via a FireWire
(IEEE1394a) PC card.
DP21
The Optimal Stand-alone Model for Conferences
The DP21 is a stand-alone digital camera with a convenient handset for simple operations from observations to imaging. Its accurate color reproductions and smooth, high-definition live image displays are ideal for small discussion groups and conferences. Optional cellSens imaging software platform also allows operation via computers.
Camera Adapters
The single port tube of the trinocular tube is detachable, and can be used with various cameras through a range of adapters.
19
Camera Adapter
(projection lens)
U-TV1xC
U-TV1x-2+U-CMAD3
U-TV0.63xC
U-TV0.5xC-3
U-TV0.35xC
Projection
Magnifications
1x
1x
0.63x
0.5x
0.35x
Projection Area (F.N.)
2/3" CCD 1/2" CCD 1/3" CCD
11 8 6
11
17.5
8
12.7
6
9.5
22
22
16
16
12
12
Practical Field of View (mm) =
Projection Area (field number)
Objective Magnifications
U-TV0.63
×C
U-TV1 ×C
U-TV1 ×-2+
U-CMAD3
U-TV0.35
×C-2 U-TV0.5×C-3
Imaging Software / cellSens
cellSens is an imaging software available in three versions to meet individual workflow needs.
"Entry" is used for simple image acquisition. “Standard” provides simple operation for imaging documentation.
“Dimension” allows for the control of the complete workflow from image capture to analysis. With GUI customization, working environments for both Standard and Dimension can be optimized according to workflow. cellSens frees the researcher to concentrate on his/her creative work.
*cellSens versions 1.4 and later support the BX3 series. cellSens functions
Layout User experience customization
View Overlay multiple images
Tile view (multiple images in a single data set shown side by side)
Image acquisition
Image processing
Image analysis
Documentation
Remote viewing
Slice view for orthogonal plane viewing of 3D or timelapse data sets
Snap/Movie acquisition
Multi-dimensional (xyzt and wavelength)
Automated multiple image alignment (requires motorized stage)
Instantly create EFI image (manual or motorized Z)
Geometry/combine/filter processing
Fluorescence unmixing
3D deconvolution (constrained iterative deconvolution)
Region and line measurements
Object analysis and classification
Colocalization
Automatically compose Word reports
Database image and data management solution for microscopy
NetCam (live image data transmission over the internet) d
Dimension Standar
✓
✓
✓
✓
✓
Multichannel 5D
✓
✓
✓
✓
Multiposition
✓
✓
Multichannel 5D
CI Deconvolution
✓
Count & Measure
Multichannel 5D
✓
Database
✓
✓
✓
Entry
✓
✓
✓
20
BX63 system diagram
TR-Adapter
U-FMT
F mount adapter
U-TMAD
T mount adapter
U-SMAD
Sony mount adapter
U-BMAD
Bayonet mount adapter
U-CMAD3
C mount adapter
◆ WHN10X-H,
WHN10X
Eyepieces
U-CT30-2
Centering telescope
* WHN10X,
WHN10X-H,
Eyepieces
U-CT30-2 telescope
U-TVZ
Zoom camera port
U-TV1x-2
Direct image camera port U-DPCAD
Dual port tube with C mounts
U-CMDPTS
C mount adapter for U-DPTS
U-DPTS
Multi double port tube
U-CMDPTS
C mount adapter for U-DPTS
U-TV0.25xC
C mount camera port with 0.25x lens
◆
U-ETR-4* 1
Erect image trinocular tube
U-TR30NIR
Trinocular tube
U-TR30-2
Trinocular tube
U-TTR-2
Tilting trinocular tube
U-BI30-2
Binocular tube
U-TBI-3* 1
Tilting binocular tube
B
U-IFCBL200
Interface cable,
200 cm
U-POT
Polarizer
U-MCZ
Controller
Filter (ø45)
U-FC
Filter cassette
BX63F
BX63 frame
Touch panel controller
(attached to BX63F)
U-LH100ADP
LH100 adapter
A
U-D7RES
Coded 7-position nosepiece
E
U-GAN
Gout analyzer
U-ANT
Analyzer for transmitted light
U-DICT
DIC slider for transmitted light
U-DICTS
Shift DIC slider for transmitted light
U-DICTHR
High resolution DIC slider for transmitted light
U-DICTHC
High contrast DIC slider for transmitted light
U-D7REA
Motorized 7-position nosepiece
BX3-ARM
Standard arm
E
OBJECTIVES
A
U-IFCBL50
Interface cable, 50 cm
A
U-AW
Motorized attenuator wheel
U-LHLEDC
LED lamp housing
U-IFCBL15
Interface cable, 15 cm
U-IFCBL200
Interface cable, 200 cm
A
B
U-LH100-3
100 W halogen lamp housing
U-RMT
Extension cord
C
CAMERAS
U-TV0.35xC-2
C mount camera port with 0.35x lens
U-TBI-3-CLI * 1
Tilting binocular tube
BX3-RFAS
Coded fluorescence illuminator
A
E
Mirror units
U-TV0.5xC-3
C mount camera port with 0.5x lens
U-TTBI
Ergonomic binocular tube
U-AN-2
Analyzer slider
U-TV0.63xC
C mount camera port with 0.63x lens
U-LHEAD
Extension adapter for lamp housing
E
BX3-RFAA
Motorized fluorescence illuminator
A
U-IFCBL15
Interface cable, 15 cm
U-ETBI
Ergonomic erect image binocular tube
U-TV1XC
C mount camera adapter
◆
U-TTLBI* 2
Tilting, telescopic, lifting binocular tube
U-DULHA
Double lamp housing adapter
U-AW
Motorized attenuator wheel
U-IFCBL15
Interface cable, 15 cm
U-IFCBL200
Interface cable, 200 cm
A
B
B
C
D
C1394A
Interface cable
BX3-CBH
Control box
U-KPA
Intermediate attachment for simple polarizing observation
U-CA
Magnification changer
U-ANT
Analyzer for transmitted light
U-EPA2
Eyepoint adjuster
U-EPAL-2
Eyepoint adjuster
U-LH75XEAPO
75 W xenon apo lamp housing
U-LH100HGAPO
100 W mercury apo lamp housing
U-RX-T
Power supply unit for xenon lamp
U-RFL-T
LIFE TIME
BURNER ON
U-LH100HG
100 W mercury lamp housing
U-RFL-T
Power supply unit for mercury lamp
PC (software)
U-RFL-T
LIFE TIME
BURNER ON
U-HLD-4,
U-HLDT-4
Specimen holder
U-HRD-4,
U-HRDT-4
Specimen holder
U-HLS-4,
U-HLST-4
Specimen holder
IX2-GCP
Glass stage insert plate
IX-CP50
Insert plate
IX-SCL
Slide clip
U-TLO
Oil top lens
U-TLD
Dry top lens
U-CST
Centering target
D
XY-controller
(attached to BX3-SSU)
U-SC3
Swing-out condenser
U-AAC
Achromatic/
Aplanatic condenser
U-ULC-2
Ultra low condenser
U-DCD
Darkfield condenser, dry
U-DCW
Darkfield condenser, oil
U-UCDTP530
Tint plate for sensitive color observation
U-UCD8-2
8-position universal condenser
U-SHG
U-SHGT
Rubber grips
U-SVLO
Oil rectangular stage with left-hand control
U-SVRO
Oil rectangular stage with right-hand control
U-SVLB-4
Mechanical stage with left-hand control
U-SVRB-4
Mechanical stage with right-hand control
Control box
(attached to BX3-SSU)
BX3-SSU
Scanning stage with ultrasonic
IX-SVL2* 3
Cross stage with short left handle
BX3-STAD
Stage adapter
* 1 Slight vignetting may occur in combination with an additional intermediate attachment or fluorescence illuminator. * 2 Require an additional intermediate attachment or fluorescence illuminator. * 3 Cannot be used with BX3-UCD8A.
Optical elements
U-CO1.25x
Low magnification conversion lens for UCD
BX3-UCD8A
Motorized universal condenser
A
U-IFCBL15
Interface cable, 15 cm
21 22
BX53 system diagram
TR-Adapter
◆
WHN10X-H,
WHN10X
Eyepieces
U-CT30-2
Centering telescope
* WHN10X, WHN10X-H,
Eyepieces
U-CT30-2
Centering telescope
▲ SWH10X-H,
Eyepieces
U-CT30-2 telescope
U-SWETTR-5
Super widefield erect image tilting trinocular observation tube
U-FMT
F mount adapter
U-TMAD
T mount adapter
U-TVZ
Zoom camera port U-TV1x-2
Direct image camera port
U-SWETR
Super widefield erect image trinocular observation tube
U-SWTR-3
Super widefield trinocular tube
U-SMAD
Sony mount adapter
U-BMAD
Bayonet mount adapter
U-DPCAD
Dual port tube with C mounts
U-CMAD3
C mount adapter
U-ETR-4* 1
Erect image trinocular tube
*
U-TR30NIR
Trinocular tube
*
*
U-TR30-2
Trinocular tube
U-TTR-2
Tilting trinocular tube
◆
U-CMDPTS
C mount adapter for U-DPTS
U-DPTS
Multi double port tube
U-CMDPTS
C mount adapter for U-DPTS
U-BI30-2
Binocular tube
*
U-TBI-3* 1
Tilting binocular tube
*
U-TV0.25xC
C mount camera port with
0.25x lens
U-TV0.35xC-2
C mount camera port with 0.35x lens
U-TBI-3-CLI* 1
Tilting binocular tube
*
*
U-TTBI
Ergonomic binocular tube
CAMERAS
U-TV0.5xC-3
C mount camera port with 0.5x lens
U-TV0.63xC-3
C mount camera port with 0.63x lens
*
U-ETBI
Ergonomic erect image binocular tube
◆
U-TV1xC
C mount camera adapter
U-TTLBI* 2
Tilting, telescopic, lifting binocular tube
U-GAN
Gout analyzer
U-ANT
Analyzer for transmitted light
U-DICT
DIC slider for transmitted light
U-DICTS
Shift DIC slider for transmitted light
U-DICTHR
High resolution DIC slider for transmitted light
U-DICTHC
High contrast DIC slider for transmitted light
U-ANT
Analyzer for transmitted light
U-TAD
Plate adapter
COMPENSATORS
U-SRG2
Rotatable graduated stage
U-FMP
Mechanical stage
OBJECTIVES
U-SRP
Precision rotatable stage
U-SP
Plain stage
A
U-D7REA
Motorized
7-position nosepiece
C
U-CST
Centering target
U-SHG
Rubber grip
U-SHGT
Rubber grip
B
U-D7RES
Coded 7-position nosepiece
BX3-ARM
Standard arm
BX53F
BX53 frame
U-POT
Polarizer
U-FC
Filter cassette
U-LH100-3
100 W halogen lamp housing
Filter (ø45)
U-SVRO
Oil rectangular stage with right-hand control
U-HLD-4,
U-HLDT-4
Specimen holder
U-SVLO
Oil rectangular stage with left-hand control
U-D7RE
Septuple revolving nosepiece for
DIC/simple POL
C
Mirror units
A
C B
C
U-HRD-4,
U-HRDT-4
Specimen holder
U-SVRB-4
Mechanical stages with right-hand control
U-D6RE
Sextuple revolving nosepiece for
DIC/simple POL
BX3-RFAA* 4
Motorized fluorescence illuminator
U-AN-2
Analyzer slider
BX3-RFAS* 4
Coded fluorescence illuminator
U-AN-2
Analyzer slider
BX3-URA
Universal reflected illuminator
U-AN-2
Analyzer slider
BX3-25ND6
ND filter
BX3-25ND25
ND filter
U-SVLB-4
Mechanical stages with left-hand control
U-P6RE
Centerable sextuple revolving nosepiece
U-HLS-4,
U-HLST-4
Specimen holder
* 1 Slight vignetting may occur in combination with an additional intermediate attachment or observation method. * 2 Require an additional intermediate attachment or fluorescence illuminator.
* 3 Cannot be used with U-TTLBI. * 4 Compatible with F.N. 22. * 5 Cannot be used with BX3-URA. * 6 Stand is a standard equipment of the U-MDOSV and U-MDO10R3. * 7 An auxiliary lens is equipped.
U-P4RE
Centerable revolving nosepiece
U-5RE-2
Quintuple revolving nosepiece
U-LHEAD* 5
Extension adapter for lamp housing
U-DULHA
Double lamp house adapter
C
A
U-AW
Motorized attenuator wheel
U-LH75XEAPO
75 W xenon apo lamp housing
U-LH100HGAPO
100 W mercury apo lamp housing
U-LH100HG
100 W mercury lamp housing
U-RFL-T
LIFE TIME
BURNER ON
U-RX-T
Power supply unit for xenon lamp
U-RFL-T
LIFE TIME
BURNER ON
U-RFL-T
Power supply unit for mercury lamp
U-ECA
Magnification changer 2x
U-ECA1.6x
Magnification changer 1.6x
U-ANT
Analyzer for
U-KPA transmitted light
Intermediate attachment for simple polarizing observation
U-CA
Magnification changer
U-DP* 1 * 3
Dual port
U-DP1xC
Dual port 1x
U-APT
Arrow pointer
U-EPA2
Eyepoint adjuster
U-EPAL-2
Eyepoint adjuster
U-TRU* 1 * 3
Trinocular intermediate unit
U-TRUS* 1
Trinocular intermediate unit
U-CPA
Intermediate attachment for conoscopic andorthoscopic observation
U-AN360P-2
Rotatable analyzer
U-OPA
Intermediate attachment for orthoscopic observation
U-DAL10X
Drawing attachment 10X
U-DA
Drawing attachment
U-DO3
Dual observation attachment
U-SDO3
Side by side observation attachment
U-MDOSV* 6
Multi observation side viewer
U-MDOB3
Multi observation body
U-MDO10B3
Multi observation body for 10 persons
U-MDO10R3* 6
Multi observation body for 10 persons
U-LC* 7
Low magnification condenser
U-AC2
Abbe condenser
U-SC3
Swing-out condenser
U-AAC
Achromatic/
Aplanatic condenser
U-ULC-2
Ultra low condenser
U-PCD2
Phase/darkfield condenser
U-POC-2
Polarizing condenser
Optical devices
U-CO1.25x
Low magnification conversion lens for UCD
U-UCDTP530
Tint plate for sensitive color observation
A
BX3-UCD8A
Motorized universal condenser
U-UCD8-2
8-position universal condenser
U-TLO
Oil top lens
U-TLD
Dry top lens
U-DCD
Darkfield condenser, dry
U-DCW
Darkfield condenser, oil
B
A
U-CBS
Control box for coded function
U-IFCBL200
Interface cable,
200 cm
U-HSEXP
Hand switch for exposure
U-HSCBM
Hand switch for CBM
U-CBM
Control box
PC (Software)
Stand* 6
DP21-CB
Control box
23 24
BX63 specifications
Microscope frame
Revolving nosepiece
Observation tube
Stage
Condenser
ND filter wheel
Fluorescence illuminator
Optical system
Focus
Fluorescence light source
Controller
Illuminator
Widefield (F.N. 22)
UIS2 optical system
Built-in motorized nosepiece focus
Stroke: 20 mm, minimum increment: 0.01 µm, maximum nosepiece movement speed: 3 mm/s
Built-in Koehler illumination for transmitted light, Light intensity LED indicator, Built-in motorized field stop
• High color reproductivity LED light source •12 V 100 W halogen bulb (pre-centered)
• Motorized septuple revolving nosepiece • Interchangeable reversed coded septuple nosepiece
• Widefield tilting trinocular • Widefield trinocular • Widefield erect image trinocular
• Widefield tilting binocular • Widefield tilting,Telescopic,Lifting binocular tube • Widefield ergo binocular
• Widefield binocular
• Ultrasonic stage (Stage stroke: X:76 mm x Y: 52 mm, maximum stage movement speed: 30 mm/s
• Ceramic-coated coaxial stage with left or right hand low drive control: with rotating mechanism and torque adjustment mechanism, optional rubber grips available
• Cross stage with short left handle
• Motorized universal condenser (N.A. 0.9, motorized 8-position turret, Aperture stop, polarizing filter in/out mechanism and top lens swing out mechanism), for 1.25x–100x [swing-out 1.25x-4x, with oil top lens: (N.A. 1.4)]
• Swing out Achromatic (N.A. 0.9), for 1.25x–100x (swing-out: 1.25x–4x)
• Achromatic Aplanatic (N.A. 1.4), for 10x–100x
• Universal (N.A. 0.9), for 1.25x–100x [swing-out: 1.25x–4x, with oil top lens:(N.A. 1.4)]
• Ultra low (N.A. 0.16), for 1.25x–4x
• Darkfield dry (N.A. 0.8–0.92), for 10x–100x
• Darkfield oil (N.A. 1.20–1.40), for 10x–100x
• Motorized 6-position ND filter wheel
• Motorized multi-purpose coded type (F.N. 22, motorized 8-position mirror unit turret, 4-position ND slider)
• Multi-purpose coded type (F.N. 22, 8-position mirror unit turret, 4-position ND slider)
• 100 W Hg apo lamp housing and transformer
• 100 W Hg lamp housing and transformer
• 75 W Xe lamp housing and transformer
• High-performance control box ( I/F: FireWire)
*This device is designed for use in industrial environments for the EMC performance (EC61326-1 Class A device). Using it in a residential environment may affect other equipment in the environment.
BX53 specifications
Microscope frame
Revolving nosepiece
Observation tube
Stage
Condenser
Fluorescence illuminator
Optical system
Focus
Illuminator
Widefield (F.N. 22)
Super widefield (F.N. 26.5)
Fluorescence light source
UIS2 optical system
Vertical stage movement: 25 mm stage stroke with coarse adjustment limit stopper, Torque adjustment for coarse adjustment knobs, Stage mounting position variable, High sensitivity fine focusing knob (minimum adjustment gradations: 1 µm)
Built-in Koehler illumination for transmitted light, Light preset switch, Light intensity LED indicator, Built-in filters (LBD-IF, ND6,
ND25, optional), 12 V 100 W halogen bulb (pre-centered)
Interchangeable reversed quintuple/coded quintuple/sextuple/septuple/coded septuple nosepiece
• Widefield tilting, telescopic and lifting binocular
• Widefield tilting trinocular • Widefield trinocular • Widefield erect image trinocular • Widefield tilting binocular
• Widefield tilting,Telescopic,Lifting binocular tube •Widefield ergo binocular •Widefield binocular
• Super widefield trinocular • Super widefield erect image trinocular
Ceramic-coated coaxial stage with left or right hand low drive control: with rotating mechanism and torque adjustment mechanism, optional rubber grips available (Non stick grooved coaxial, plain, rotatable stages are also available)
• Abbe (N.A. 1.1), for 4x–100x
• Swing out Achromatic (N.A. 0.9), for 1.25x–100x (swing-out: 1.25x–4x)
• Achromatic Aplanatic (N.A. 1.4), for 10x–100x
• Phase contrast, darkfield (N.A. 1.1), [phase contrast: for 10x–100x, darkfield: for 10x–100x (up to N.A. 0.80)]
• Universal (N.A. 0.9), for 1.25x–100x [swing-out: 1.25x–4x, with oil top lens:(N.A. 1.4)]
• Low (N.A. 0.75), for 2x–100x(Dry)
• Ultra low (N.A. 0.16), for 1.25x–4x
• Darkfield dry (N.A. 0.8–0.92), for 10x–100x
• Darkfield oil (N.A. 1.20–1.40), for 10x–100x
• Multi-purpose coded type (F.N. 22, 8-position mirror unit turret, 4-position ND slider)
• Economical type (F.N. 26.5, 8-position mirror unit turret)
• 100 W Hg apo lamp housing and transformer
• 100 W Hg lamp housing and transformer
• 75 W Xe lamp housing and transformer
*The U-CBM is designed for the BX3 use in industrial environments for the EMC performance (IEC61326-1 Class A device). Using it in a residential environment may affect other equipment in the environment.
BX63/BX53 common specifications
Operating environment • Indoor use
• Ambient temperature : 5 º to 40 ºC (41 º to 104 ºF)
• Maximum relative humidity : 80 % for temperatures up to 31º C (88 ºF), decreasing linearly through 70 % at 34 ºC
(93 ºF), 60 % at 37 ºC (99 ºF), to 50 % relative humidity at 40 ºC (104 ºF)
• Supply voltage fluctuations : Not to exceed ±10 % of the normal voltage
BX63 FL dimensions
220 212.5*
(unit: mm) Touch panel controller dimensions (unit: mm)
FS AS
OFF MAX
ECO mode
FL SHUTTER
OPEN CLOSE
OBSERVATION
FL PH DIC BF PO DF
FL MIRROR UNIT
1 2 3 4 5 6 7 8
OLYMPUS
25
°
TURRET POL.
TOP LENS AS
OFF
ECO mode
MAX
FL SHUTTER
OPEN CLOSE
3
DF
UNIT
8
190
294.5
152.5
429
656
680.5
Weight: Approx. 35 kg, Power consumption: Approx. 440 W
The length marked with an asterisk (*) may vary according to interpupillary distance. Distance for figure shown is 62 mm.
BX53 FL dimensions
175 184*
(unit: mm)
Weight: Approx. 2.4 kg, Power consumption: Approx. 25 W
BX3-CBH dimensions
210.5
(unit: mm)
SHUTTER
FS AS
100 280
294.5
Weight: Approx. 4.2 kg, Power consumption: Approx. 230 W
90
274.5
91.5
362
436.5
521.5
Weight: Approx 21 kg, Power consumption: Approx. 290 W
The length marked with an asterisk (*) may vary according to interpupillary distance. Distance for figure shown is 62 mm.
BX53 BF dimensions (unit: mm)
175 184*
90
274.5
91.5
362
436.5
Weight: Approx. 16 kg, Power consumption: Approx. 140 W
The length marked with an asterisk (*) may vary according to interpupillary distance. Distance for figure shown is 62 mm.
25 26
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement