L-Acoustics LA 4, LA 4X, LA 8, LA 12X, K1, K1 SB, K2, KUDO, KARA, KIVA II, SB 15m, SB 28, SB 218, SB 118, SB 18, SB 15, KILO, V-DOSC, dV-DOSC, dV-SUB, ARCS II, Wide, Focus, X 15HiQ, X 12, X 8, 5XT, 8XT, 12XTP, MTD 108a, MTD 112b, MTD 115bP, MTD 115bA, 12XTA Preset guide
Reklama
Reklama
preset libraries
preset guide (EN)
Document reference: preset libraries preset guide (EN) version 8.1
Distribution date: October 3, 2016
© 2016 L-Acoustics. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means without the express written consent of the publisher.
Contents
3
4
Introduction
Introduction
The L-Acoustics amplied controllers are delivered with onboard rmware and preset library.
Presets of the onboard library can be loaded from the front panel of the amplied controller, or from the
LA Network Manager software application, a management tool dedicated to the remote control and monitoring of a network of L-Acoustics amplied controllers.
LA Network Manager must be used for updating rmware on L-Acoustics amplied controllers. An up-to-date preset library is automatically installed with the rmware. Check the L-Acoustics website for the latest version of software,
rmware and libraries.
Operating L-Acoustics amplied controllers
Refer to the LA4, LA4X, LA8, LA12X, LA-RAK and LA-RAK II user manuals.
Installing LA Network Manager
Download the LA amplied controller release pack and refer to the Readme le.
Updating rmware on an L-Acoustics amplied controller
Refer to the LA Network Manager video tutorial, accessible from the Help menu of the software.
This version of the preset guide describes the LA4, LA4X, LA8 and LA12X preset libraries version 5.6(.5).
5 preset libraries preset guide (EN) version 8.1
Preset design
Preset design
Gain structure
The gains of all L-Acoustics factory presets are calibrated with a reference pink noise signal, representative of most demanding musical programs. The reference input level is 0 dBu (with analog audio source) or -22 dBFS (with digital audio source).
When feeding L-Acoustics amplied controllers at this input level, L-Acoustics loudspeaker enclosures provide the sound engineer with 8 dB of headroom, except for smaller formats calibrated for 4 dB of headroom (MTD108a, 5XT, X8, 8XT,
Kiva, Kilo).
This gain structure helps managing power resources of L-Acoustics systems when using different enclosures of the same format. With default output gain settings (0 dB), all enclosures reach their limits for the same program level. Apply a gain adjustment of -4 dB for smaller format enclosures when used along with bigger format L-Acoustics enclosures.
Headroom for SB15m
SB15m presets [SB15_100] and [SB15_100_C] have 8 dB of headroom from preset library version 5.6(.5).
4 dB of headroom are provided when using presets from earlier versions and preset [KIVA_SB15].
Electro-acoustic coupling
Each recommended loudspeaker conguration provides a coherent sound source, by implementing a loudspeaker system in a specic deployment pattern and with dened factory presets.
L-Acoustics factory presets ensure the coupling between the different transducer sections, whether it is internal coupling as in active loudspeaker enclosures, or external coupling as when several loudspeaker enclosures are combined.
Users can adjust preset parameters on top of factory settings and for predened channel sets.
Channel sets have been dened for the presets dedicated to active loudspeaker enclosures and to some specic loudspeaker congurations. A channel set maintains a coherent coupling by linking several output channels for the setting of routing, gain and delay parameters. For example, [LF HF] is a channel set for 2-way loudspeaker enclosure presets, and [SR SB SB SB] is a channel set for cardioid subwoofer presets.
The Presets Guide describes the recommended loudspeaker congurations for each system, with the corresponding factory presets and the main resulting acoustic properties.
When applicable, refer to the user manual of the related system for the limit between coupled and separated subwoofers.
For some loudspeaker enclosure combinations, it is necessary to adjust the delay values for time-alignment. Refer to
Frequency response contour
For the X Series coaxial loudspeaker enclosures, there are two distinct contours:
— the standard preset, for all applications except stage monitor applications
— the _MO preset, dedicated to stage monitor applications
For legacy coaxial loudspeaker enclosures (XT and MTD Series), there are three distinct contours:
— the _FR presets, for most of FOH applications
— the _FI presets, for spoken word, classical music, jazz, or ll systems
— the _MO presets, for half-space loading conditions, typically monitor applications
For current WST systems, there are one or two distinct contours:
— the main preset, ensuring a reference FOH contour to the line source with usual deployment parameters
— the _FI preset, dedicated to loudspeaker enclosures used as a ll system (for some systems only)
The oldest WST systems inherit from a legacy preset structure (_HI and _LO presets).
If necessary, users can adjust the sonic signature of L-Acoustics systems through the Contour EQ tools in LA Network
Manager.
The Array Morphing tool provides two parameters, zoom factor and LF contour, that allow users to adjust the response of a WST system. At any reference listening distance and with any line source length, the engineer can obtain the sonic signature of a bigger, smaller, closer or further system, and can unify the sonic signature of multiple sources. Refer to the
LA Network Manager tutorial and Array Morphing white paper for detailed information.
preset libraries preset guide (EN) version 8.1
6
7
Onboard preset libraries
Onboard preset libraries
Each onboard preset library includes the L-Acoustics loudspeaker enclosures of which power requirements match the delivering capability of the corresponding amplied controller.
amplied controllers maximum output power type load
LA12X
LA8
LA4X
LA4
8 Ω
4 x 1400 W
4 x 1100 W
4 x 800 W
4 x 1000 W
4 Ω
4 x 2600 W
4 x 1000 W
4 x 1800 W
2.7 Ω
4 x 3300 W
N/A
N/A
LA4 preset library
The LA4 onboard preset library is stored in the factory memory locations 011 to 089 of the controller (the memory locations 001 to 010 are dedicated to the storage of presets modied by the user). Each preset family is described in the tables below, including the presets memory location number, name, and description.
LA4 Preset Library5.6
KIVA
011
012
[KIVA]
[KIVA_FI]
Kiva, full range, FOH
Kiva, full range, ll
SB15KIVA
013 [KIVA_SB15]
KILOKIVA
014 [KIVA_KILO]
Kiva & SB15m, X-OVER=100 Hz, full range, FOH
Kiva & Kilo, full range, X-OVER=100 Hz, FOH
ARCS
015
016
017
018
019
020
[ARCS_LO]
[ARCS_LO_60]
[ARCS_LO_100]
[ARCS_HI]
[ARCS_HI_60]
[ARCS_HI_100]
ARCS_WF
021
022
[ARCS_WIFO]
[ARCS_WIFO_FI]
ARCS, full range, LO contour
ARCS, HPF=60 Hz, LO contour
ARCS, HPF=100 Hz, LO contour
ARCS, full range, HI contour
ARCS, HPF=60 Hz, HI contour
ARCS, HPF=100 Hz, HI contour
ARCS Wide or ARCS Focus, full range, FOH
ARCS Wide or ARCS Focus, full range, ll
preset libraries preset guide (EN) version 8.1
Onboard preset libraries
8XT
046
047
048
049
050
051
027
028
029
030
SB15
031
032
KILO
033
SB18
023
024
025
026
SB118
[SB18_60]
[SB18_100]
[SB18_60_C]
[SB18_100_C]
[SB118_60]
[SB118_100]
[SB118_60_C]
[SB118_100_C]
[SB15_100]
[SB15_100_C]
[KILO]
12XTA
034
035
036
037
038
039
[12XTA_FI]
[12XTA_FI_100]
[12XTA_FR]
[12XTA_FR_100]
[12XTA_MO]
[12XTA_MO_100]
12XTP
040
041
042
043
044
045
[12XTP_FI]
[12XTP_FI_100]
[12XTP_FR]
[12XTP_FR_100]
[12XTP_MO]
[12XTP_MO_100]
[8XT_FI]
[8XT_FI_100]
[8XT_FR]
[8XT_FR_100]
[8XT_MO]
[8XT_MO_100]
SB18, LPF=60 Hz
SB18, LPF=100 Hz
SB18, LPF=60 Hz, cardioid pattern
SB18, LPF=100 Hz, cardioid pattern
SB118, LPF=60 Hz
SB118, LPF=100 Hz
SB118, LPF=60 Hz, cardioid pattern
SB118, LPF=100 Hz, cardioid pattern
SB15, LPF=100 Hz
SB15, LPF=100 Hz, cardioid pattern
Kilo, LPF=100 Hz
12XT active, full range, ll
12XT active, HPF=100 Hz, ll
12XT active, full range, FOH
12XT active, HPF=100 Hz, FOH
12XT active, full range, monitor
12XT active, HPF=100 Hz, monitor
12XT passive, full range, ll
12XT passive, HPF=100 Hz, ll
12XT passive, full range, FOH
12XT passive, HPF=100 Hz, FOH
12XT passive, full range, monitor
12XT passive, HPF=100 Hz, monitor
8XT, full range, ll
8XT, HPF=100 Hz, ll
8XT, full range, FOH
8XT, HPF=100 Hz, FOH
8XT, full range, monitor
8XT, HPF=100 Hz, monitor preset libraries preset guide (EN) version 8.1
8
5XT
052
115XT
053
054
055
056
057
058
[5XT]
[115XT_FI]
[115XT_FI_100]
[115XT_FR]
[115XT_FR_100]
[115XT_MO]
[115XT_MO_100]
5XT, full range
115XT, full range, ll
115XT, HPF=100 Hz, ll
115XT, full range, FOH
115XT, HPF=100 Hz, FOH
115XT, full range, monitor
115XT, HPF=100 Hz, monitor
MTD115bA
059
060
061
062
063
064
[115bA_FI]
[115bA_FI_100]
[115bA_FR]
[115bA_FR_100]
MTD115b active, full range, ll
MTD115b active, HPF=100 Hz, ll
MTD115b active, full range, FOH
MTD115b active, HPF=100 Hz, FOH
[115bA_MO] MTD115b active, full range, monitor
[115bA_MO_100] MTD115b active, HPF=100 Hz, monitor
MTD115bP
065
066
067
068
069
070
[115bP_FI]
[115bP_FI_100]
[115bP_FR]
[115bP_FR_100]
[115bP_MO]
[115bP_MO_100]
112XT
071
072
073
074
075
076
[112XT_FI]
[112XT_FI_100]
[112XT_FR]
[112XT_FR_100]
[112XT_MO]
[112XT_MO_100]
MTD115b passive, full range, ll
MTD115b passive, HPF=100 Hz, ll
MTD115b passive, full range, FOH
MTD115b passive, HPF=100 Hz, FOH
MTD115b passive, full range, monitor
MTD115b passive, HPF=100 Hz, monitor
112XT, full range, ll
112XT, HPF=100 Hz, ll
112XT, full range, FOH
112XT, HPF=100 Hz, FOH
112XT, full range, monitor
112XT, HPF=100 Hz, monitor
Onboard preset libraries
9 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
083
084
085
086
087
088
FLAT
089
MTD112b
077
078
079
080
081
082
MTD108a
[112b_FI]
[112b_FI_100]
[112b_FR]
[112b_FR_100]
[112b_MO]
[112b_MO_100]
[108a_FI]
[108a_FI_100]
[108a_FR]
[108a_FR_100]
[108a_MO]
[108a_MO_100]
[FLAT_LA4]
MTD112b, full range, ll
MTD112b, HPF=100 Hz, ll
MTD112b, full range, FOH
MTD112b, HPF=100 Hz, FOH
MTD112b, full range, monitor
MTD112b, HPF=100 Hz, monitor
MTD108a, full range, ll
MTD108a, HPF=100 Hz, ll
MTD108a, full range, FOH
MTD108a, HPF=100 Hz, FOH
MTD108a, full range, monitor
MTD108a, HPF=100 Hz, monitor
Flat EQ, protection minimizing clipping risks preset libraries preset guide (EN) version 8.1
10
Onboard preset libraries
LA4X preset library
014
015
016
017
018
019
020
021
022
The LA4X onboard preset library is stored in the factory memory locations 011 to 073 of the controller (the memory locations 001 to 010 are dedicated to the storage of presets modied by the user). Each preset family is described in the tables below, including the presets memory location number, name, and description.
LA4X Preset Library5.6
K2
011
012
013
KUDO
[K2 70]
[K2 90]
[K2 110]
K2, full range, 70º adjustable ns settings
K2, full range, 90º adjustable ns settings
K2, full range, 110º adjustable ns settings
[KUDO50_25]
[KUDO50_40]
[KUDO50_60]
[KUDO80_25]
[KUDO80_40]
[KUDO80_60]
[KUDO110_25]
[KUDO110_40]
[KUDO110_60]
Kudo, HPF=25 Hz, 50º K-Louver settings
Kudo, HPF=40 Hz, 50º K-Louver settings
Kudo, HPF=60 Hz, 50º K-Louver settings
Kudo, HPF=25 Hz, 80º K-Louver settings
Kudo, HPF=40 Hz, 80º K-Louver settings
Kudo, HPF=60 Hz, 80º K-Louver settings
Kudo, HPF=25 Hz, 110º K-Louver settings
Kudo, HPF=40 Hz, 110º K-Louver settings
Kudo, HPF=60 Hz, 110º K-Louver settings
KARA
023
024
025
[KARA]
[KARA_FI]
[KARADOWNK1]
KIVA_II
026
027
KIVA
[KIVA II]
[KIVA II_FI]
028
029
[KIVA]
[KIVA_FI]
SB15KIVA
030 [KIVA_SB15]
KILOKIVA
031 [KIVA_KILO]
ARCS_II
032 [ARCS II]
Kara, full range, FOH
Kara, HPF=100 Hz, ll
Kara, HPF=100 Hz, optimized delay for K1 downll
Kiva II, full range, FOH
Kiva II, full range, ll
Kiva, full range, FOH
Kiva, full range, ll
Kiva & SB15m, X-OVER=100 Hz, full range, FOH
Kiva & Kilo, full range, X-OVER=100 Hz, FOH
ARCS II, full range
11 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
SB15
039
040
KILO
041
ARCS_WF
033
034
SB18
[ARCS_WIFO]
[ARCS_WIFO_FI]
035
036
037
038
[SB18_60]
[SB18_100]
[SB18_60_C]
[SB18_100_C]
[SB15_100]
[SB15_100_C]
[KILO]
X15HiQ
042
043
[X15]
[X15_MO]
X12
044
045
[X12]
[X12_MO]
X8
046
047
[X8]
[X8_MO]
115XTHiQ
048
049
050
051
052
053
[HiQ_FI]
[HiQ_FI_100]
[HiQ_FR]
[HiQ_FR_100]
[HiQ_MO]
[HiQ_MO_100]
ARCS Wide or ARCS Focus, full range, FOH
ARCS Wide or ARCS Focus, full range, ll
SB18, LPF=60 Hz
SB18, LPF=100 Hz
SB18, LPF=60 Hz, cardioid pattern
SB18, LPF=100 Hz, cardioid pattern
SB15, LPF=100 Hz
SB15, LPF=100 Hz, cardioid pattern
Kilo, LPF=100 Hz
X15 HiQ, full range
X15 HiQ, full range, monitor, low latency
X12, full range
X12, full range, monitor, low latency
X8, full range
X8, full range, monitor, low latency
115XT HiQ, full range, ll
115XT HiQ, HPF=100 Hz, ll
115XT HiQ, full range, FOH
115XT HiQ, HPF=100 Hz, FOH
115XT HiQ, full range, monitor
115XT HiQ, HPF=100 Hz, monitor preset libraries preset guide (EN) version 8.1
12
066
067
068
069
070
071
5XT
072
060
061
062
063
064
065
8XT
12XTA
054
055
056
057
058
059
12XTP
[12XTA_FI]
[12XTA_FI_100]
[12XTA_FR]
[12XTA_FR_100]
[12XTA_MO]
[12XTA_MO_100]
[12XTP_FI]
[12XTP_FI_100]
[12XTP_FR]
[12XTP_FR_100]
[12XTP_MO]
[12XTP_MO_100]
[8XT_FI]
[8XT_FI_100]
[8XT_FR]
[8XT_FR_100]
[8XT_MO]
[8XT_MO_100]
[5XT]
FLAT
073 [FLAT_LA4X]
12XT active, full range, ll
12XT active, HPF=100 Hz, ll
12XT active, full range, FOH
12XT active, HPF=100 Hz, FOH
12XT active, full range, monitor
12XT active, HPF=100 Hz, monitor
12XT passive, full range, ll
12XT passive, HPF=100 Hz, ll
12XT passive, full range, FOH
12XT passive, HPF=100 Hz, FOH
12XT passive, full range, monitor
12XT passive, HPF=100 Hz, monitor
8XT, full range, ll
8XT, HPF=100 Hz, ll
8XT, full range, FOH
8XT, HPF=100 Hz, FOH
8XT, full range, monitor
8XT, HPF=100 Hz, monitor
5XT, full range
Flat EQ, protection minimizing clipping risks
Onboard preset libraries
13 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
LA8 preset library
The LA8 onboard preset library is stored in the factory memory locations 011 to 149 of the controller (the memory locations 001 to 010 are dedicated to the storage of presets modied by the user). Each preset family is described in the tables below, including the presets memory location number, name, and description.
LA8 Preset Library5.6
K1
011
K2
[K1] K1, full range
012
013
014
[K2 70]
[K2 90]
[K2 110]
K2, full range, 70º adjustable ns settings
K2, full range, 90º adjustable ns settings
K2, full range, 110º adjustable ns settings
024
025
026
027
028
029
030
031
032
018
019
020
021
022
023
KUDO
K1-SB
015
016
017
V-DOSC
[K1SB_60]
[K1SB_X]
[K1SB_X K2]
[V-DOSC_LO]
[V-DOSC_LO_60]
[V-DOSC_LO_X]
[V-DOSC_HI]
[V-DOSC_HI_60]
[V-DOSC_HI_X]
[KUDO50_25]
[KUDO50_40]
[KUDO50_60]
[KUDO80_25]
[KUDO80_40]
[KUDO80_60]
[KUDO110_25]
[KUDO110_40]
[KUDO110_60]
KARA
033
034
035
[KARA]
[KARA_FI]
[KARADOWNK1]
K1-SB, LPF=60 Hz, optimized for CONTOUR conguration
K1-SB, LPF=200 Hz, optimized for THROW conguration with K1
K1-SB, LPF=200 Hz, optimized for THROW conguration with K2
V-DOSC, full range, LO contour
V-DOSC, HPF=60 Hz, LO contour
V-DOSC, full range, LO contour, optimized for [SB218_X] & [dV-S_X] presets
V-DOSC, full range, HI contour
V-DOSC, HPF=60 Hz, HI contour
V-DOSC, full range, HI contour, optimized for [SB218_X] & [dV-S_X] presets
Kudo, HPF=25 Hz, 50º K-Louver settings
Kudo, HPF=40 Hz, 50º K-Louver settings
Kudo, HPF=60 Hz, 50º K-Louver settings
Kudo, HPF=25 Hz, 80º K-Louver settings
Kudo, HPF=40 Hz, 80º K-Louver settings
Kudo, HPF=60 Hz, 80º K-Louver settings
Kudo, HPF=25 Hz, 110º K-Louver settings
Kudo, HPF=40 Hz, 110º K-Louver settings
Kudo, HPF=60 Hz, 110º K-Louver settings
Kara, full range, FOH
Kara, HPF=100 Hz, ll
Kara, HPF=100 Hz, optimized delay for K1 downll preset libraries preset guide (EN) version 8.1
14
Onboard preset libraries
dV-DOSC
036
037
038
039
040
[dV_FI]
[dV_LO]
[dV_LO_100]
[dV_HI]
[dV_HI_100]
dV-D_dVS
041
042
043
044
[dV_dV-S_LO]
[dV_dV-S_HI]
[dV_dV-S_LO60]
[dV_dV-S_HI60]
dV-SUB
045
046
047
048
[dV-S_60_100]
[dV-S_100]
[dV-S_60_X]
[dV-S_X]
ARCS_II
049 [ARCS II]
ARCS
050
051
052
053
054
055
[ARCS_LO]
[ARCS_LO_60]
[ARCS_LO_100]
[ARCS_HI]
[ARCS_HI_60]
[ARCS_HI_100]
ARCS_WF
056
057
SB28
[ARCS_WIFO]
[ARCS_WIFO_FI]
058
059
060
061
[SB28_60]
[SB28_100]
[SB28_60_C]
[SB28_100_C] dV-DOSC, HPF=100 Hz, ll dV-DOSC, full range, LO contour dV-DOSC, HPF=100 Hz, LO contour dV-DOSC, full range, HI contour dV-DOSC, HPF=100 Hz, HI contour dV-DOSC & dV-SUB, X-OVER=100 Hz, LO contour dV-DOSC & dV-SUB, X-OVER=100 Hz, HI contour dV-DOSC & dV-SUB, HPF=60 Hz, X-OVER=100 Hz, LO contour dV-DOSC & dV-SUB, HPF=60 Hz, X-OVER=100 Hz, HI contour dV-SUB, HPF=60 Hz, LPF=100 Hz dV-SUB, LPF=100 Hz dV-SUB, HPF=60 Hz, LPF=200 Hz, optimized for [V-DOSC_xx_60] presets dV-SUB, LPF=200 Hz, optimized for [V-DOSC_xx_X] presets
ARCS II, full range
ARCS, full range, LO contour
ARCS, HPF=60 Hz, LO contour
ARCS, HPF=100 Hz, LO contour
ARCS, full range, HI contour
ARCS, HPF=60 Hz, HI contour
ARCS, HPF=100 Hz, HI contour
ARCS Wide or ARCS Focus, full range, FOH
ARCS Wide or ARCS Focus, full range, ll
SB28, LPF=60 Hz
SB28, LPF=100 Hz
SB28, LPF=60 Hz, cardioid pattern
SB28, LPF=100 Hz, cardioid pattern
15 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
KILO
075 [KILO]
KIVA_II
076
077
KIVA
[KIVA II]
[KIVA II_FI]
078
079
[KIVA]
[KIVA_FI]
SB15KIVA
080 [KIVA_SB15]
KILOKIVA
081 [KIVA_KILO]
X15HiQ
082
083
[X15]
[X15_MO]
SB218
062
063
064
[SB218_60]
[SB218_100]
[SB218_X]
SB18
065
066
067
068
[SB18_60]
[SB18_100]
[SB18_60_C]
[SB18_100_C]
SB118
069
070
071
072
[SB118_60]
[SB118_100]
[SB118_60_C]
[SB118_100_C]
SB15
073
074
[SB15_100]
[SB15_100_C]
SB218, LPF=60 Hz
SB218, LPF=100 Hz
SB218, LPF=200 Hz, optimized for [V-DOSC_xx_X] presets
SB18, LPF=60 Hz
SB18, LPF=100 Hz
SB18, LPF=60 Hz, cardioid pattern
SB18, LPF=100 Hz, cardioid pattern
SB118, LPF=60 Hz
SB118, LPF=100 Hz
SB118, LPF=60 Hz, cardioid pattern
SB118, LPF=100 Hz, cardioid pattern
SB15, LPF=100 Hz
SB15, LPF=100 Hz, cardioid pattern
Kilo, LPF=100 Hz
Kiva II, full range, FOH
Kiva II, full range, ll
Kiva, full range, FOH
Kiva, full range, ll
Kiva & SB15m, X-OVER=100 Hz, full range, FOH
Kiva & Kilo, full range, X-OVER=100 Hz, FOH
X15 HiQ, full range
X15 HiQ, full range, monitor, low latency preset libraries preset guide (EN) version 8.1
16
Onboard preset libraries
106
107
108
109
110
111
5XT
112
X12
084
085
X8
[X12]
[X12_MO]
086
087
[X8]
[X8_MO]
115XTHiQ
100
101
102
103
104
105
8XT
088
089
090
091
092
093
12XTA
[HiQ_FI]
[HiQ_FI_100]
[HiQ_FR]
[HiQ_FR_100]
[HiQ_MO]
[HiQ_MO_100]
094
095
096
097
098
099
12XTP
[12XTA_FI]
[12XTA_FI_100]
[12XTA_FR]
[12XTA_FR_100]
[12XTA_MO]
[12XTA_MO_100]
[12XTP_FI]
[12XTP_FI_100]
[12XTP_FR]
[12XTP_FR_100]
[12XTP_MO]
[12XTP_MO_100]
[8XT_FI]
[8XT_FI_100]
[8XT_FR]
[8XT_FR_100]
[8XT_MO]
[8XT_MO_100]
[5XT]
X12, full range
X12, full range, monitor, low latency
X8, full range
X8, full range, monitor, low latency
115XT HiQ, full range, ll
115XT HiQ, HPF=100 Hz, ll
115XT HiQ, full range, FOH
115XT HiQ, HPF=100 Hz, FOH
115XT HiQ, full range, monitor
115XT HiQ, HPF=100 Hz, monitor
12XT active, full range, ll
12XT active, HPF=100 Hz, ll
12XT active, full range, FOH
12XT active, HPF=100 Hz, FOH
12XT active, full range, monitor
12XT active, HPF=100 Hz, monitor
12XT passive, full range, ll
12XT passive, HPF=100 Hz, ll
12XT passive, full range, FOH
12XT passive, HPF=100 Hz, FOH
12XT passive, full range, monitor
12XT passive, HPF=100 Hz, monitor
8XT, full range, ll
8XT, HPF=100 Hz, ll
8XT, full range, FOH
8XT, HPF=100 Hz, FOH
8XT, full range, monitor
8XT, HPF=100 Hz, monitor
5XT, full range
17 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
137
138
139
140
141
142
131
132
133
134
135
136
125
126
127
128
129
130
112XT
115XT
113
114
115
116
117
118
MTD115bA
[115XT_FI]
[115XT_FI_100]
[115XT_FR]
[115XT_FR_100]
[115XT_MO]
[115XT_MO_100]
[115bP_FI]
[115bP_FI_100]
[115bP_FR]
[115bP_FR_100]
[115bP_MO]
[115bP_MO_100]
115XT, full range, ll
115XT, HPF=100 Hz, ll
115XT, full range, FOH
115XT, HPF=100 Hz, FOH
115XT, full range, monitor
115XT, HPF=100 Hz, monitor
119
120
121
122
123
124
MTD115bP
[115bA_FI]
[115bA_FI_100]
[115bA_FR]
MTD115b active, full range, ll
MTD115b active, HPF=100 Hz, ll
MTD115b active, full range, FOH
[115bA_FR_100]
[115bA_MO]
MTD115b active, HPF=100 Hz, FOH
MTD115b active, full range, monitor
[115bA_MO_100] MTD115b active, HPF=100 Hz, monitor
MTD115b passive, full range, ll
MTD115b passive, HPF=100 Hz, ll
MTD115b passive, full range, FOH
MTD115b passive, HPF=100 Hz, FOH
MTD115b passive, full range, monitor
MTD115b passive, HPF=100 Hz, monitor
[112XT_FI]
[112XT_FI_100]
[112XT_FR]
[112XT_FR_100]
[112XT_MO]
[112XT_MO_100]
MTD112b
[112b_FI]
[112b_FI_100]
[112b_FR]
[112b_FR_100]
[112b_MO]
[112b_MO_100]
112XT, full range, ll
112XT, HPF=100 Hz, ll
112XT, full range, FOH
112XT, HPF=100 Hz, FOH
112XT, full range, monitor
112XT, HPF=100 Hz, monitor
MTD112b, full range, ll
MTD112b, HPF=100 Hz, ll
MTD112b, full range, FOH
MTD112b, HPF=100 Hz, FOH
MTD112b, full range, monitor
MTD112b, HPF=100 Hz, monitor preset libraries preset guide (EN) version 8.1
18
MTD108a
143
144
145
146
147
148
[108a_FI]
[108a_FI_100]
[108a_FR]
[108a_FR_100]
[108a_MO]
[108a_MO_100]
FLAT
149 [FLAT_LA8]
MTD108a, full range, ll
MTD108a, HPF=100 Hz, ll
MTD108a, full range, FOH
MTD108a, HPF=100 Hz, FOH
MTD108a, full range, monitor
MTD108a, HPF=100 Hz, monitor
Flat EQ, protection minimizing clipping risks
Onboard preset libraries
19 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
LA12X preset library
K1-SB
015
016
017
KARA
018
019
020
The LA12X onboard preset library is stored in the factory memory locations 011 to 074 of the controller (the memory locations 001 to 010 are dedicated to the storage of presets modied by the user). Each preset family is described in the tables below, including the presets memory location number, name, and description.
LA12X Preset Library5.6
K1
011
K2
[K1] K1, full range
012
013
014
[K2 70]
[K2 90]
[K2 110]
K2, full range, 70º adjustable ns settings
K2, full range, 90º adjustable ns settings
K2, full range, 110º adjustable ns settings
[K1SB_60]
[K1SB_X]
[K1SB_X K2]
[KARA]
[KARA_FI]
[KARADOWNK1]
K1-SB, LPF=60 Hz, optimized for CONTOUR conguration
K1-SB, LPF=200 Hz, optimized for THROW conguration with K1
K1-SB, LPF=200 Hz, optimized for THROW conguration with K2
Kara, full range, FOH
Kara, HPF=100 Hz, ll
Kara, HPF=100 Hz, optimized delay for K1 downll
024
025
026
027
SB28
ARCS_II
021 [ARCS II]
ARCS_WF
022
023
KS28
[ARCS_WIFO]
[ARCS_WIFO_FI]
[KS28_60]
[KS28_100]
[KS28_60_C]
[KS28_100_C]
028
029
030
031
[SB28_60]
[SB28_100]
[SB28_60_C]
[SB28_100_C]
ARCS II, full range
ARCS Wide or ARCS Focus, full range, FOH
ARCS Wide or ARCS Focus, full range, ll
KS28, LPF=60 Hz
KS28, LPF=100 Hz
KS28, LPF=60 Hz, cardioid pattern
KS28, LPF=100 Hz, cardioid pattern
SB28, LPF=60 Hz
SB28, LPF=100 Hz
SB28, LPF=60 Hz, cardioid pattern
SB28, LPF=100 Hz, cardioid pattern preset libraries preset guide (EN) version 8.1
20
Onboard preset libraries
SB18
032
033
034
035
038
039
KIVA
[SB18_60]
[SB18_100]
[SB18_60_C]
[SB18_100_C]
SB15
036
037
KIVA_II
[SB15_100]
[SB15_100_C]
[KIVA II]
[KIVA II_FI]
040
041
[KIVA]
[KIVA_FI]
SB15KIVA
042 [KIVA_SB15]
X15HiQ
043
044
[X15]
[X15_MO]
X12
045
046
[X12]
[X12_MO]
X8
047
048
[X8]
[X8_MO]
115XTHiQ
049
050
051
052
053
054
[HiQ_FI]
[HiQ_FI_100]
[HiQ_FR]
[HiQ_FR_100]
[HiQ_MO]
[HiQ_MO_100]
SB18, LPF=60 Hz
SB18, LPF=100 Hz
SB18, LPF=60 Hz, cardioid pattern
SB18, LPF=100 Hz, cardioid pattern
SB15, LPF=100 Hz
SB15, LPF=100 Hz, cardioid pattern
Kiva II, full range, FOH
Kiva II, full range, ll
Kiva, full range, FOH
Kiva, full range, ll
Kiva & SB15m, X-OVER=100 Hz, full range, FOH
X15 HiQ, full range
X15 HiQ, full range, monitor, low latency
X12, full range
X12, full range, monitor, low latency
X8, full range
X8, full range, monitor, low latency
115XT HiQ, full range, ll
115XT HiQ, HPF=100 Hz, ll
115XT HiQ, full range, FOH
115XT HiQ, HPF=100 Hz, FOH
115XT HiQ, full range, monitor
115XT HiQ, HPF=100 Hz, monitor
21 preset libraries preset guide (EN) version 8.1
Onboard preset libraries
067
068
069
070
071
072
5XT
073
061
062
063
064
065
066
8XT
12XTA
055
056
057
058
059
060
12XTP
[12XTA_FI]
[12XTA_FI_100]
[12XTA_FR]
[12XTA_FR_100]
[12XTA_MO]
[12XTA_MO_100]
[12XTP_FI]
[12XTP_FI_100]
[12XTP_FR]
[12XTP_FR_100]
[12XTP_MO]
[12XTP_MO_100]
[8XT_FI]
[8XT_FI_100]
[8XT_FR]
[8XT_FR_100]
[8XT_MO]
[8XT_MO_100]
[5XT]
FLAT
074 [FLAT_LA12X]
12XT active, full range, ll
12XT active, HPF=100 Hz, ll
12XT active, full range, FOH
12XT active, HPF=100 Hz, FOH
12XT active, full range, monitor
12XT active, HPF=100 Hz, monitor
12XT passive, full range, ll
12XT passive, HPF=100 Hz, ll
12XT passive, full range, FOH
12XT passive, HPF=100 Hz, FOH
12XT passive, full range, monitor
12XT passive, HPF=100 Hz, monitor
8XT, full range, ll
8XT, HPF=100 Hz, ll
8XT, full range, FOH
8XT, HPF=100 Hz, FOH
8XT, full range, monitor
8XT, HPF=100 Hz, monitor
5XT, full range
Flat EQ, protection minimizing clipping risks preset libraries preset guide (EN) version 8.1
22
FLAT presets
FLAT presets
The transducer connected to an output channel of a FLAT preset is not protected by L-DRIVE.
The only active limitation allows minimizing clipping risks to protect the amplier.
When driving a third party loudspeaker enclosure, it is then recommended to use an external DSP device with a preset specically designed for this model.
With a FLAT preset, an input signal is amplied and directly routed to output without any modication of the frequency response. All the output parameters are accessible (Mute, Gain, Delay, Polarity, and Routing).
Using the [FLAT_xxxx] preset with LA4 or LA4X provides 6 dB of headroom. Using the [FLAT_LA8] preset with LA8 provides 8 dB of headroom. Using [FLAT_LA12X] preset with LA12X provides 9.5 dB of headroom.
[FLAT_xxxx] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
23 preset libraries preset guide (EN) version 8.1
Variable Curvature WST systems presets
Variable Curvature WST systems presets
The factory presets dedicated to variable curvature WST line sources are optimized for long throw applications. In the following sections, tables describe the loudspeaker congurations and the factory presets for each system. Discriminant acoustic properties of each loudspeaker conguration are given, such as -10 dB bandwidth or LF limit, frequency response contour, or directivity specicity.
K1
Compatibility issues
[K1], [KARADOWNK1] and [K2 xxx] presets from versions 4.x and later of the preset library are not compatible with [K1] and [KARADOWNK1] from versions of the preset library prior to 4.0.
Compatibility issues may occur when working from a Session le with units using older presets. Use the same version of the preset library for all units within a single line source.
loudspeaker conguration
K1
[K1]
preset(s)
K1-SB
—
KS28 or SB28
* acoustic properties
35 Hz - 20 kHz K1 line source
K1 / KI-SB line source (K1-SB on top)
[K1] [K1SB_X] — enhanced LF throw
K1 line source + coupled K1-
SB subwoofers
(beside or behind)
[K1] [K1SB_60] — down to 30 Hz reinforced LF contour
LF rejection (side polarized or rear cardioid)
K1 line source + subwoofers
[K1] — [xx28_60] down to 25 Hz reinforced LF contour
*
with subwoofers as a cardioid array, use [xx28_60_C]
Downll options for additional vertical coverage
K2 enclosures driven by [K2_110]
Kara enclosures driven by [KARADOWNK1]
[K1] and [K2 xxx] loudspeaker elements
left LF right LF
MF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
LF
MF
HF
routing
IN A
gain
0 dB
delay
0 ms
polarity
+
mute
ON
ON
ON
ON left/right when looking at the front face of the enclosure preset libraries preset guide (EN) version 8.1
24
Variable Curvature WST systems presets
[K1SB_X] and [K1SB_60] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
[KARADOWNK1] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
LF
HF
IN A
IN A
gain
0 dB
0 dB
delay
0 ms
0 ms
polarity mute
+
+
ON
ON
ON
ON
The factory parameters already include optimal delay value for the coupling of a K1 line source with KARA as a downll.
Routing, gain, delay, polarity and mute parameters can be modied by the user.
polarity
+
+
+
+
mute
ON
ON
ON
ON
25 preset libraries preset guide (EN) version 8.1
Variable Curvature WST systems presets
K2 loudspeaker conguration
K2 preset(s)
K1-SB KS28 or SB28
* acoustic properties
K2 line source [K2 xxx] —
35 Hz - 20 kHz adjustable horizontal directivity
K2 / K1-SB line source (K1-SB on top)
K2 line source + coupled K1-SB subwoofers (on top, beside or behind)
[K2 xxx]
[K2 xxx]
[K1SB_X K2]
[K1SB_60]
—
—
K2 line source + subwoofers
[K2 xxx] — [xx28_60]
*
with subwoofers as a cardioid array, use [xx28_60_C]
K2 adjustable ns and presets
Always ensure that the K2 adjustable ns are set in accordance with the selected preset:
[K2 70]: 70º, [K2 90]: 90º, [K2 110]: 110º
Refer to the K2 user manual for details.
[K2 xxx] loudspeaker elements
left LF right LF
MF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
LF
MF
HF
routing
IN A
gain
0 dB
delay
0 ms enhanced LF throw down to 30 Hz reinforced LF contour
LF rejection (side polarized or rear cardioid) down to 25 Hz reinforced LF contour
polarity
+
mute
ON
ON
ON
ON left/right when looking at the front face of the enclosure
[K1SB_X K2] and [K1SB_60] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
Routing, gain, delay, polarity and mute parameters can be modied by the user.
polarity
+
+
+
+
mute
ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
26
Variable Curvature WST systems presets
Kudo loudspeaker conguration preset(s)
KS28 or SB28 or SB18
* acoustic properties
Kudo line source
Kudo line source + subwoofer
Kudo
[KUDOxx_25]
[KUDOxx_40]
[KUDOxx_60]
[KUDOxx_40]
—
[xxxx_60_C]
*
with subwoofers as a cardioid array, use [xxxx_xx_C]
K-LOUVER and presets
Always ensure that the K-LOUVER panels are set in accordance with the selected preset:
[KUDO50_xx]: 50º, [KUDO80_xx]: 80º, [KUDO110_xx]: 110º
Refer to the Kudo user manual for details.
[KUDOxx_xx] loudspeaker elements
left LF right LF
MF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
LF
MF
HF
routing
IN A
gain
0 dB
delay
0 ms
35 Hz — 20 kHz
40 Hz — 20 kHz
60 Hz — 20 kHz down to 25 Hz (KS28 and
SB28) or 32 Hz (SB18) reinforced LF contour
polarity
+
mute
ON
ON
ON
ON left/right when looking at the front face of the enclosure
Routing, gain, delay, polarity and mute parameters can be modied by the user.
27 preset libraries preset guide (EN) version 8.1
Variable Curvature WST systems presets
Kara
Kara and Kara(i) are different versions of the same enclosure. They share the same factory presets and recommended loudspeaker congurations.
loudspeaker conguration
Kara line source
Kara line source + coupled subwoofer
Kara line source + separated subwoofer
Kara
[KARA]
[KARA]
[KARA]
preset(s)
KS28, SB28 or SB18
*
—
[xxxx_100]
[xxxx_60]
acoustic properties
55 Hz - 20 kHz down to 32 Hz (SB18) or
25 Hz (KS28 or SB28) reinforced LF contour single or pair of
Kara enclosures
[KARA_FI] — high-pass at 100 Hz
at response
*
with subwoofers as a cardioid array, use [xxxx_xx_C]
[KARA] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
IN A
LF
HF
IN A
[KARA_FI] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
LF
HF
IN A
IN B
gain
0 dB
0 dB
gain
0 dB
0 dB
delay
0 ms
0 ms
delay
0 ms
0 ms
polarity
+
+
mute
ON
ON
ON
ON
polarity mute
+
+
ON
ON
ON
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
preset libraries preset guide (EN) version 8.1
28
Variable Curvature WST systems presets
Kiva II loudspeaker conguration
Kiva II line source
Kiva II line source + coupled subwoofer
Kiva II
[KIVA II]
[KIVA II]
preset(s)
SB15m
*
[SB15_100]
—
SB18
*
[SB18_60] up to three
Kiva II enclosures
[KIVA II_FI] up to three Kiva II enclosures + coupled subwoofer
[KIVA II_FI] [SB15_100]
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
[KIVA II] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN A
IN A
[KIVA II_FI] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
gain
0 dB
0 dB
0 dB
0 dB
gain
0 dB
0 dB
0 dB
0 dB
—
—
delay
0 ms
0 ms
0 ms
0 ms
delay
0 ms
0 ms
0 ms
0 ms
Routing, gain, delay, polarity and mute parameters can be modied by the user.
polarity
+
+
+
+
polarity
+
+
+
+
acoustic properties
70 Hz - 20 kHz down to 32
Hz (SB18) /
40 Hz (SB15m) reinforced LF contour
70 Hz - 20 kHz
at response down to 40 Hz reinforced LF contour
mute
ON
ON
ON
ON
mute
ON
ON
ON
ON
29 preset libraries preset guide (EN) version 8.1
Variable Curvature WST systems presets
Kiva SB15m loudspeaker conguration
Kiva line source
Kiva line source + coupled SB15m
Kiva
[KIVA]
preset(s)
[KIVA_SB15]
SB15m
—
*
[KIVA] [SB15_100] single or pair of
Kiva enclosures
[KIVA_FI] — pair of Kiva enclosures + coupled SB15m
[KIVA_FI] [SB15_100]
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
[KIVA] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN A
IN A
[KIVA_FI] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
[KIVA_SB15] loudspeaker elements
SB15m
KIVA
KIVA
KIVA
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
PA
PA
PA
gain
0 dB
0 dB
0 dB
0 dB
gain
0 dB
0 dB
0 dB
0 dB
routing
IN A
gain
0 dB
delay
0 ms
0 ms
0 ms
0 ms
delay
0 ms
0 ms
0 ms
0 ms
delay
0 ms
acoustic properties
80 Hz — 20 kHz down to 40 Hz reinforced LF contour
80 Hz — 20 kHz
at response down to 40 Hz reinforced LF contour
polarity
+
+
+
+
polarity
+
+
+
+
mute
ON
ON
ON
ON
mute
ON
ON
ON
ON
polarity mute
+ ON
ON
ON
ON
Hybrid preset combining [KIVA] with [SB15_100], pre-alignment delay included.
Routing, gain, delay, polarity and mute parameters can be modied by the user.
preset libraries preset guide (EN) version 8.1
30
Variable Curvature WST systems presets
Kiva Kilo loudspeaker conguration
Kiva line source
Kiva line source + coupled Kilo
Kiva line source + coupled Kilo +
SB18
Kiva
[KIVA]
[KIVA_KILO]
[KIVA_KILO]
preset(s)
Kilo
— single or pair of
Kiva enclosures
[KIVA_FI]
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
[KIVA] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN A
IN A
[KIVA_FI] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
[KIVA_KILO] loudspeaker elements
KILO
KIVA
KIVA
KIVA
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
PA
PA
PA
gain
0 dB
0 dB
0 dB
0 dB
gain
0 dB
0 dB
0 dB
0 dB
routing
IN A
—
SB18
—
*
[SB18_60]
delay
0 ms
0 ms
0 ms
0 ms
delay
0 ms
0 ms
0 ms
0 ms
gain
0 dB
polarity delay
0 ms
acoustic properties
+
+
+
+
80 Hz - 20 kHz down to 50 Hz down to 32 Hz reinforced LF contour
80 Hz - 20 kHz
at response
polarity
+
+
+
+
polarity
+
mute
ON
ON
ON
ON
mute
ON
ON
ON
ON
mute
ON
ON
ON
ON
Hybrid preset combining [KIVA] with [KILO], pre-alignment delay included.
31 preset libraries preset guide (EN) version 8.1
Variable Curvature WST systems presets
[KILO] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
Routing, gain, delay, polarity and mute parameters can be modied by the user.
polarity
+
+
+
+
mute
ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
32
Variable Curvature WST systems presets
V-DOSC loudspeaker conguration
V-DOSC line source
V-DOSC line source + coupled dV-SUB
V-DOSC line source +
KS28 / SB28
V-DOSC line source + coupled SB218
V-DOSC
*
[V-DOSC _LO] or [V-DOSC_HI]
[V-DOSC_xx _X]
[V-DOSC _xx_60]
[V-DOSC_xx _X]
dV-SUB
[dV-S_X]
—
—
preset(s)
KS28 / SB28 /
SB218
**
—
[xx28_60]
[SB218_X]
—
dV-DOSC
—
—
acoustic properties
40 Hz - 20 kHz down to 35 Hz reinforced
LF contour down to 25 Hz reinforced
LF contour
V-DOSC line source + coupled dV-SUB +
KS28 / SB28
[V-DOSC _xx_60] [dV-S_60_X] [xx28_60] — down to 25 Hz reinforced
LF contour additional
LF resources
V-DOSC line source + coupled dV-DOSC
[V-DOSC _xx] —
*
standard HF contour with [xx_LO] or increased HF contour with [xx_HI]
**
with subwoofers as a cardioid array, use [xxxx_xx_C]
[V-DOSC_LO], [V-DOSC_HI], [V-DOSC_xx_60] and [V-DOSC_xx_X] loudspeaker elements
left LF right LF
MF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
LF
MF
HF
routing
IN A
gain
0 dB
[dV_xx_100]
delay
0 ms downll coverage
polarity mute
+ ON
ON
ON
ON left/right when looking at the front face of the enclosure
[dV-S_X], [dV-S_60_X], and [SB218_X] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
Routing, gain, delay, polarity and mute parameters can be modied by the user.
polarity
+
+
+
+
mute
ON
ON
ON
ON
33 preset libraries preset guide (EN) version 8.1
Variable Curvature WST systems presets
dV-DOSC preset(s) loudspeaker conguration dV-DOSC
* dV-SUB
KS28, SB218,
SB28, SB18 or SB118
** acoustic properties
dV-DOSC line source [dV_LO] or [dV_HI] dV-DOSC line source + coupled dV-SUB
[dV_dV-S_xx]
[dV_xx_100] [dV-S_100] dV-DOSC line source + coupled subwoofer dV-DOSC line source + coupled dV-SUB + coupled subwoofer
[dV_xx_100]
[dV_dV-S_xx60]
[dV_xx_100]
—
[dV-S_60_100]
— single or pair of dV-
DOSC enclosures
[dV_FI]
* standard HF contour with [xx_LO] or increased HF contour with [xx_HI]
**
with subwoofers as a cardioid array, use [xxxx_xx_C]
[dV _LO], [dV _HI], [dV_xx_60] and [dV_xx_100] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
LF
HF
IN A
IN A
[dV_FI] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
LF
HF
IN A
IN B
[dV-S_100] and [dV-S_60_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
—
—
[xxxx_100]
[xxxx_60]
gain
0 dB
0 dB
gain
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
delay
0 ms
0 ms
delay
0 ms
0 ms
65 Hz - 20 kHz down to 35 Hz reinforced LF contour
32 Hz (SB18/
25 Hz (KS28 /
SB28 / SB218) high-pass at 100 Hz
at response
polarity mute
+
+
ON
ON
ON
ON
polarity mute polarity
+
+
+
+ down to
SB118) or
+
+
ON
ON
ON
ON
mute
ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
34
Variable Curvature WST systems presets
[dV_dV-S_HI], [dV_dV-S_HI60], [dV_dV-S_LO] and [dV_dV-S_LO60] loudspeaker elements
dV-SUB dV-SUB dV-DOSC LF dV-DOSC HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
SB
SB
LF
HF
IN A
IN A
IN B
gain
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
polarity mute
+ ON
+
+
ON
ON
ON
[dV_dV-S_xx] are hybrid presets combining [dV_LO_100] or [dV_HI_100] with [dV-S_100], pre-alignment delay included.
[dV_dV-S_xx60] are hybrid presets combining [dV_LO_100] or [dV_HI_100] with [dV-S_60_100], pre-alignment delay included.
Routing, gain, delay, polarity and mute parameters can be modied by the user.
35 preset libraries preset guide (EN) version 8.1
Constant Curvature WST systems presets
Constant Curvature WST systems presets
The factory presets dedicated to constant curvature WST line sources are optimized for medium throw applications.
In the following sections, tables describe the loudspeaker congurations and the factory presets for each system.
Discriminant acoustic properties of each loudspeaker conguration are given, such as -10 dB bandwidth or LF limit, or frequency response contour.
ARCS II loudspeaker conguration
ARCS II line source
ARCS II
[ARCS II]
preset(s)
KS28 or SB28
*
—
ARCS II line source
+ subwoofer
[ARCS II]
*
with subwoofers as a cardioid array, use [xxxx_xx_C]
[ARCS II] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
LF
HF
LF
HF
routing
IN A
IN B
[xx28_60]
gain
0 dB
0 dB
Routing, gain, delay, polarity and mute parameters can be modied by the user.
acoustic properties delay
0 ms
0 ms
50 Hz - 20 kHz down to 25 Hz reinforced LF contour
polarity mute
+ ON
+
ON
ON
ON preset libraries preset guide (EN) version 8.1
36
Constant Curvature WST systems presets
ARCS Wide / ARCS Focus loudspeaker conguration
WiFo line source
WiFo line source +
SB18 single WiFo enclosure
ARCS Wide /
ARCS Focus
[ARCS_WIFO]
[ARCS_WIFO]
preset(s)
SB18
—
*
[SB18_60]
[ARCS_WIFO_FI] — single WiFo enclosure +
SB18m
[ARCS_WIFO_FI]
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
[ARCS_WIFO] and [ARCS_WIFO_FI] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
gain
0 dB
0 dB
0 dB
0 dB
[SB18_60]
delay
0 ms
0 ms
0 ms
0 ms
Routing, gain, delay, polarity and mute parameters can be modied by the user.
acoustic properties
55 Hz - 20 kHz down to 32 HZ reinforced LF contour
55 Hz - 20 kHz
at response down to 32 HZ reinforced LF contour
polarity
+
+
+
+
mute
ON
ON
ON
ON
37 preset libraries preset guide (EN) version 8.1
Constant Curvature WST systems presets
ARCS loudspeaker conguration
ARCS
* preset(s)
[ARCS_LO] or [ARCS_HI]
SB18/SB118 or
KS28/SB28/SB218
**
— ARCS line source
ARCS line source + subwoofer
[ARCS_xx_60] [xxxx_60]
ARCS line source + coupled subwoofer
[ARCS_xx_100] [xxxx_100]
*
standard HF contour with [xx_LO] or increased HF contour with [xx_HI]
**
with subwoofers as a cardioid array, use [xxxx_xx_C]
[ARCS_LO], [ARCS_HI], [ARCS_xx_60] and [ARCS_xx_100] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
LF
HF
IN A
IN A
gain
0 dB
0 dB
acoustic properties delay
0 ms
0 ms
50 Hz - 20 kHz down to
32 Hz (SB18/SB118) or
25 Hz (KS28 /
SB28 / SB218) reinforced LF contour
polarity mute
+
+
ON
ON
ON
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
preset libraries preset guide (EN) version 8.1
38
Coaxial loudspeaker enclosures presets
Coaxial loudspeaker enclosures presets
The factory presets dedicated to coaxial enclosures are optimized for short throw applications. In the following sections, tables describe the loudspeaker congurations and the factory presets for each system. Discriminant acoustic properties of each loudspeaker conguration are given, such as -10 dB bandwidth or LF limit, or frequency response contour.
X15 HiQ
X15 HiQ is an active coaxial loudspeaker enclosure.
loudspeaker conguration preset(s)
SB18
*
—
acoustic properties
X15 HiQ
X15 HiQ + SB18
X15 HiQ
[X15]
[X15_MO]
[X15]
[X15_MO]
—
[SB18_100]
55 Hz - 20 kHz
52 Hz - 20 kHz low latency down to 32 Hz reinforced LF contour down to 32 Hz reinforced LF contour low latency
*
with SB subwoofers as a cardioid array, use [SB18_100_C]
[xx_MO] presets for the X series use the amplied controller low latency operating mode. When used along with subwoofers, it is recommended to use the subwoofers in low latency operating mode. To achieve this, create custom presets combining low latency channel sets and subwoofer channel sets.
If the subwoofers are driven from a dedicated amplied controller using a subwoofer factory preset, they are operated in normal latency mode. Therefore, an additional delay should be set to the [xx_MO] low latency channels to align them: 2.65 ms on LA8 or 3.08 ms on LA4X and LA12X.
[X15] and [X15_MO] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF IN A
HF
LF
HF
IN B
gain
0 dB
0 dB
delay
0 ms
0 ms
polarity mute
+ ON
+
ON
ON
ON
[SB18_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
39 preset libraries preset guide (EN) version 8.1
Coaxial loudspeaker enclosures presets
[SB18_100_C] loudspeaker elements
SR
SB
SB
SB
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SR
SB
SB
SB
routing
IN A
gain
0 dB
Routing, gain, delay, polarity and mute parameters can be modied by the user.
delay
0 ms
polarity mute
+ ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
40
Coaxial loudspeaker enclosures presets
X12
X12 is a passive coaxial loudspeaker enclosure.
loudspeaker conguration preset(s)
SB15m or SB18
*
—
acoustic properties
X12
X12 + subwoofer
X12
[X12]
[X12_MO]
[X12]
[X12_MO]
—
[SBxx_100]
59 Hz - 20 kHz
57 Hz - 20 kHz low latency down to 40 Hz (SB15m) or 32 Hz (SB18) reinforced LF contour down to 40 Hz (SB15m) or 32 Hz (SB18) reinforced LF contour low latency
*
with SB subwoofers as a cardioid array, use [SBxx_100_C]
[xx_MO] presets for the X series use the amplied controller low latency operating mode. When used along with subwoofers, it is recommended to use the subwoofers in low latency operating mode. To achieve this, create custom presets combining low latency channel sets and subwoofer channel sets.
If the subwoofers are driven from a dedicated amplied controller using a subwoofer factory preset, they are operated in normal latency mode. Therefore, an additional delay should be set to the [xx_MO] low latency channels to align them: 2.65 ms on LA8 or 3.08 ms on LA4X and LA12X.
[X12] and [X12_MO] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
[SBxx_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
41 preset libraries preset guide (EN) version 8.1
Coaxial loudspeaker enclosures presets
[SBxx_100_C] loudspeaker elements
SR
SB
SB
SB
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SR
SB
SB
SB
routing
IN A
gain
0 dB
Routing, gain, delay, polarity and mute parameters can be modied by the user.
delay
0 ms
polarity mute
+ ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
42
Coaxial loudspeaker enclosures presets
X8
X8 is a passive coaxial loudspeaker enclosure.
loudspeaker conguration preset(s)
SB15m
*
—
acoustic properties
X8
X8 + SB15m
X8
[X8]
[X8_MO]
[X8]
[X8_MO]
—
[SB15_100]
60 Hz - 20 kHz
55 Hz - 20 kHz low latency down to 40 Hz reinforced LF contour down to 40 Hz reinforced LF contour low latency
*
with SB subwoofers as a cardioid array, use [SB15_100_C]
[xx_MO] presets for the X series use the amplied controller low latency operating mode. When used along with subwoofers, it is recommended to use the subwoofers in low latency operating mode. To achieve this, create custom presets combining low latency channel sets and subwoofer channel sets.
If the subwoofers are driven from a dedicated amplied controller using a subwoofer factory preset, they are operated in normal latency mode. Therefore, an additional delay should be set to the [xx_MO] low latency channels to align them: 2.65 ms on LA8 or 3.08 ms on LA4X and LA12X.
[X8] and [X8_MO] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
[SBxx_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
[SBxx_100_C] loudspeaker elements
SR
SB
SB
SB
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SR
SB
SB
SB
routing
IN A
gain
0 dB
delay
0 ms
polarity
+
mute
ON
ON
ON
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
43 preset libraries preset guide (EN) version 8.1
Coaxial loudspeaker enclosures presets
5XT
5XT is a passive coaxial loudspeaker enclosure.
loudspeaker conguration
5XT
5XT
[5XT]
preset(s)
SB15m
*
—
5XT + SB15m [5XT] [SB15_100]
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
[5XT] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
[SB15_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
delay
0 ms
0 ms
0 ms
0 ms
Routing, gain, delay, polarity and mute parameters can be modied by the user.
acoustic properties
95 Hz - 20 kHz down to 40 Hz reinforced LF contour
polarity
+
+
+
+
polarity
+
+
+
+
mute
ON
ON
ON
ON
mute
ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
44
Coaxial loudspeaker enclosures presets
8XT, 12XTP, MTD108a, MTD112b and MTD115bP
8XT, 12XTP, MTD108a, MTD112b and MTD115bP are passive coaxial loudspeaker enclosures.
Preset names passive coaxial loudspeaker enclosure preset
8XT [8XT_xx]
12XT (in passive mode) [12XTP_xx]
MTD108a
MTD112b
MTD115b (in passive mode)
[108a_xx]
[112b_xx]
[115bP_xx]
loudspeaker conguration
coaxial
passive xxx preset(s)
SB15m, SB18 or SB118
*
[xxx_FR], [xxx_FI] or [xxx_MO]
—
acoustic properties
nominal bandwidth coaxial + coupled SB subwoofer
[xxx_xx_100] [SBxx_100] down to 40 Hz
(SB15m) or 32 Hz
(SB18/SB118) reinforced LF contour choice between
3 contours
**
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
**
[xxx_FR] for FOH application, [xxx_FI] for speech, classical music or ll, [xxx_MO] at in half-space loading conditions (oor, wall or ceiling)
[xxx_FR], [xxx_FI], [xxx_MO] and [xxx_xx_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
PA
PA
PA
PA
routing
IN A
IN A
IN B
IN B
gain
0 dB
0 dB
0 dB
0 dB
delay
0 ms
0 ms
0 ms
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
45 preset libraries preset guide (EN) version 8.1
Coaxial loudspeaker enclosures presets
12XTA, 115XT, 115XT HiQ and MTD115bA
12XTA, 115XT, 115XT HiQ and MTD115bA are active coaxial loudspeaker enclosures.
Preset names active coaxial loudspeaker enclosure preset
12XT (in active mode) [12XTA_xx]
115XT HiQ [HiQ_xx]
MTD115b (in active mode)
115XT
[115bA_xx]
[115XT_xx]
loudspeaker conguration
coaxial
active xxx preset(s)
SB18 or SB118
*
[xxx_FR], [xxx_FI] or [xxx_MO]
—
acoustic properties
nominal bandwidth coaxial + coupled SB subwoofer
[xxx_xx_100] [SBxx_100] down to 32 Hz reinforced LF contour choice between
3 contours
**
*
with SB subwoofers as a cardioid array, use [SBxx_xx_C]
**
[xxx_FR] for FOH application, [xxx_FI] for speech, classical music or ll, [xxx_MO] at in half-space loading conditions (oor, wall or ceiling)
[xxx_FR], [xxx_FI], [xxx_MO] and [xxx_xx_100] loudspeaker elements
LF
HF
LF
HF
outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels routing
LF
HF
LF
HF
IN A
IN B
gain
0 dB
0 dB
delay
0 ms
0 ms
polarity mute
+
+
ON
ON
ON
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
preset libraries preset guide (EN) version 8.1
46
Subwoofer loudspeaker enclosures presets
Subwoofer loudspeaker enclosures presets
In this section, tables describe the loudspeaker congurations for L-Acoustics versatile subwoofers, and the corresponding factory presets. Discriminant acoustic properties of each loudspeaker conguration are given, such as -10 dB bandwidth or LF limit, or directivity specicity.
subwoofer presets optimal compatibility
SB15m [SB15_100] or [SB15_100_C] Coupled Kiva, coupled Kiva II, XT, X12, X8
SB18(i)
SB18m
SB118
SB28
KS28
KS28
SB218
[SB18_60] or [SB18_60_C]
[SB18_100] or [SB18_100_C]
Kudo, Kara, Kiva/Kilo, ARCS,ARCS Wide, ARCS Focus
Kara, ARCS, XT, X series, Kiva II
[SB118_60] or [SB118_60_C] Kudo, dV-DOSC/dV-SUB, Kiva/Kilo, ARCS
[SB118_100] or [SB118_100_C] dV-DOSC, ARCS, XT, coupled MTD
[SB28_60] or [SB28_60_C]
[SB28_100] or [SB28_100_C]
[KS28_60] or [KS28_60_C]
[KS28_100] or [KS28_100_C]
[KS28_60] or [KS28_60_C]
[KS28_100] or [KS28_100_C]
[SB218_60]
[SB218_100]
K1, K2, V-DOSC, Kudo, dV-DOSC/dV-SUB, Kara/SB18, ARCS,
ARCSII dV-DOSC, Kara, coupled ARCS
K1, K2, V-DOSC, Kudo, dV-DOSC/dV-SUB, Kara/SB18, ARCS,
ARCSII dV-DOSC, Kara, coupled ARCS
K1, K2, V-DOSC, Kudo, dV-DOSC/dV-SUB, Kara/SB18, ARCS,
ARCSII dV-DOSC, Kara, coupled ARCS
V-DOSC, Kudo, dV-DOSC/dV-SUB, ARCS dV-DOSC, coupled ARCS
loudspeaker conguration
standard cardioid
* preset
**
[xxxx_60] or [xxxx_100]
[xxxx_60_C] or [xxxx_100_C]
acoustic properties
down to 40 Hz (SB15m),
32 Hz (SB18 / SB118) or
25 Hz (KS28 / SB28 / SB218) down to 40 Hz (SB15m),
32 Hz (SB18 / SB118) or
25 Hz (KS28 / SB28) cardioid directivity pattern
*
refer to the subwoofer user manual for the recommended deployment patterns in each conguration
**
SB218 is exclusively driven by LA8 and LA12X amplied controllers. KS28 is exclusively driven by LA12X amplied controllers.
47 preset libraries preset guide (EN) version 8.1
Subwoofer loudspeaker enclosures presets
[xxxx_60] or [xxxx_100] outputs
OUT 1
OUT 2
OUT 3
OUT 4
channels
SB
SB
SB
SB
[xxxx_60_C] or [xxxx_100_C] loudspeaker elements
SR
SB
SB
SB
outputs
OUT 1
OUT 2
OUT 3
OUT 4
routing
IN A
IN A
IN A
IN A
gain
0 dB
0 dB
0 dB
0 dB
channels routing
SR IN A
SB
SB
SB
delay
0 ms
0 ms
0 ms
0 ms
gain
0 dB
Routing, gain, delay, polarity and mute parameters can be modied by the user.
delay
0 ms
polarity
+
+
+
+
mute
ON
ON
ON
ON
polarity mute
+ ON
ON
ON
ON preset libraries preset guide (EN) version 8.1
48
Pre-alignement delay values
Pre-alignement delay values
Time alignement from geometric measurements
When combining several loudspeaker systems, it is important to adjust their delay values to optimize acoustic summation. If no acoustic measurement tool is available, it is possible to use the pre-alignment delay values given in the tables on this section.
Pre-alignment delays have been measured with the enclosures at the same geometric location, front face on the same plane.
After adding these values to the factory presets, time-alignment is then obtained by adding the geometric delay to the closest system. The geometric delay is calculated from the path difference between a reference listening point and the center of each system.
Laser rangenders
The L-Acoustics Tech Toolcase includes two laser devices that can be used for geometric measurements: TruPulse
™
200 (trademark of Laser Technology, Inc.) and Leica DISTO
™
D3 (trademark Leica Geosystems).
line source + separated subwoofer
Procedure
1. Measure the path difference: PA - PB, with:
P: reference listening point
A: center of the further system, named system a
B: center of the closest system, named system b
2. Calculate the Geometric delay(s): Path difference (m) / Sound velocity (m.s
-1 sound velocity ≈ 340 m.s
-1
at 20°C and in dry air
), with:
3. Refer to the tables of this section to nd the Pre-alignment delay a and the Pre-alignment delay b, corresponding to the system a + system b combination.
4. Add the Alignment delay to the factory preset of each system. Being the closest to the reference listening point, the geometric delay must be added to the system b only: a) alignment delay (ms) for system a = Pre-alignment delay a (ms) b) alignment delay (ms) for system b = Pre-alignment delay b (ms) + Geometric delay (ms)
Normalization: If ≠ 0, substract Pre-alignment delay a to both Alignment delay values.
49 preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
Variable curvature WST systems
K1 + K1-SB presets
[K1] + [K1SB_X]
[K1] + [K1SB_60]
K1 + SB28 presets
[K1] + [SB28_60]
[K1] + [SB28_60_C]
K1 + KS28 presets
[K1] + [KS28_60]
[K1] + [KS28_60_C]
K1 + K1-SB + SB28 presets
[K1] + [K1SB_X] +
[SB28_60]
[K1] + [K1SB_X] +
[SB28_60_C]
[K1] + [K1SB_60] +
[SB28_60]
[K1] + [K1SB_60] +
[SB28_60_C]
K1 + K1-SB + KS28 presets
[K1] + [K1SB_X] +
[KS28_60]
[K1] + [K1SB_X] +
[KS28_60_C]
[K1] + [K1SB_60] +
[KS28_60]
[K1] + [K1SB_60] +
[KS28_60_C]
K2 + K1-SB presets
[K2] + [K1SB_X K2]
[K2] + [K1SB_60]
K1 = 0 ms
K1 = 8 ms
K1 = 0 ms
K1 = 8 ms
pre-alignment delay values
K1 = 0 ms
K1 = 6 ms
pre-alignment delay values
K1 = 0 ms
K1 = 0 ms
pre-alignment delay values
K1 = 0 ms
K1 = 0 ms
pre-alignment delay values
K1 = 0 ms K1-SB = 0 ms
K1 = 13.5 ms
K1-SB = 0 ms
K1-SB = 2 ms
K1-SB = 7.5 ms
pre-alignment delay values
K1 = 0 ms K1-SB = 0 ms
K1 = 13.5 ms
K1-SB = 0 ms
K1-SB = 2 ms
K1-SB = 7.5 ms
pre-alignment delay values
K2 = 0 ms
K2 = 6 ms
K1-SB = 0 ms
K1-SB = 0 ms
SB28 = 6 ms
SB28 = 0.5 ms
KS28 = 6 ms
KS28 = 0.5 ms
K1-SB = 0 ms
K1-SB = 0 ms
SB28 = 6 ms
SB28 = 0.5 ms
SB28 = 0 ms
SB28 = 0 ms
KS28 = 6 ms
KS28 = 0.5 ms
KS28 = 0 ms
KS28 = 0 ms preset libraries preset guide (EN) version 8.1
50
Pre-alignement delay values
K2 + SB28 presets
[K2] + [SB28_60]
[K2] + [SB28_60_C]
K2 + KS28 presets
[K2] + [KS28_60]
[K2] + [KS28_60_C]
pre-alignment delay values
K2 = 0 ms
K2 = 0 ms
K2 + K1-SB + SB28 presets
[K2] + [K1SB_X K2] +
[K2] + [K1SB_X K2] +
[SB28_60_C]
[K2] + [K1SB_60] +
[SB28_60]
[K2] + [K1SB_60] +
[SB28_60_C]
K2 + K1-SB + KS28 presets
[K2] + [K1SB_X K2] +
[KS28_60]
[K2] + [K1SB_X K2] +
[KS28_60_C]
[K2] + [K1SB_60] +
[KS28_60]
[K2] + [K1SB_60] +
[KS28_60_C]
pre-alignment delay values
K2 = 0 ms
K2 = 0 ms
K2 = 8 ms
K2 = 13.5 ms
pre-alignment delay values
Kudo = 0 ms
Kudo = 2 ms
K1-SB = 0 ms
K1-SB = 0 ms
K1-SB = 2 ms
K1-SB = 7.5 ms
pre-alignment delay values
K2 = 0 ms
K2 = 0 ms
K2 = 8 ms
K2 = 13.5 ms
Kudo + SB118 presets
[KUDOxx_60] + [SB118_60]
[KUDOxx_60] + [SB118_60_C]
K1-SB = 0 ms
K1-SB = 0 ms
K1-SB = 2 ms
K1-SB = 7.5 ms
Kudo + SB18 presets
[KUDOxx_60] + [SB18_60]
[KUDOxx_60] + [SB18_60_C]
Kudo + SB218 presets
[KUDOxx_60] + [SB218_60]
pre-alignment delay values
K2 = 0 ms
K2 = 0 ms
pre-alignment delay values
Kudo = 0 ms
Kudo = 1.6 ms
pre-alignment delay values
Kudo = 0 ms
SB28 = 6 ms
SB28 = 0.5 ms
KS28 = 6 ms
KS28 = 0.5 ms
SB28 = 6 ms
SB28 = 0.5 ms
SB28 = 0 ms
SB28 = 0 ms
KS28 = 6 ms
KS28 = 0.5 ms
KS28 = 0 ms
KS28 = 0 ms
SB118 = 3.5 ms
SB118 = 0 ms
SB18 = 3.9 ms
SB18 = 0 ms
SB218 = 5 ms
51 preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
Kudo + SB28 presets
[KUDOxx_60] + [SB28_60]
[KUDOxx_60] + [SB28_60_C]
Kudo + KS28 presets
[KUDOxx_60] + [KS28_60]
[KUDOxx_60] + [KS28_60_C]
Kara + SB18 presets
[KARA] + [SB18_100]
[KARA_FI] + [SB18_100]
[KARA] + [SB18_100_C]
[KARA_FI] + [SB18_100_C]
[KARA] + [SB18_60]
[KARA] + [SB18_60_C]
Kara + SB28 presets
[KARA] + [SB28_100]
[KARA] + [SB28_100_C]
[KARA] + [SB28_60]
[KARA] + [SB28_60_C]
Kara + KS28 presets
[KARA] + [KS28_100]
[KARA] + [KS28_100_C]
[KARA] + [KS28_60]
[KARA] + [KS28_60_C]
Kara + SB18 + SB28 presets
[KARA] + [SB18_100] +
[SB28_60]
[KARA] + [SB18_100] +
[SB28_60_C]
pre-alignment delay values
Kudo = 0 ms
Kudo = 0.5 ms
pre-alignment delay values
Kudo = 0 ms
Kudo = 0.5 ms
pre-alignment delay values
Kara = 0 ms
Kara = 3.0 ms
Kara = 5.5 ms
Kara = 8.5 ms
Kara = 2.5 ms
Kara = 8 ms
pre-alignment delay values
Kara = 0 ms
Kara = 4.2 ms
Kara = 0.3 ms
Kara = 5.9 ms
pre-alignment delay values
Kara = 0 ms
Kara = 4.2 ms
Kara = 0.3 ms
Kara = 5.9 ms
pre-alignment delay values
Kara = 0 ms SB18 = 0 ms
Kara = 4.2 ms SB18 = 4.2 ms
SB28 = 5 ms
SB28 = 0 ms
KS28 = 5 ms
KS28 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB28 = 1.35 ms
SB28 = 0 ms
SB28 = 0 ms
SB28 = 0 ms
KS28 = 1.35 ms
KS28 = 0 ms
KS28 = 0 ms
KS28 = 0 ms
SB28 = 1.3 ms
SB28 = 0 ms preset libraries preset guide (EN) version 8.1
52
Pre-alignement delay values
Kara + SB18 + KS28 presets
[KARA] + [SB18_100] +
[KS28_60]
[KARA] + [SB18_100] +
[KS28_60_C]
Kiva + Kilo presets
[KIVA] + [KILO]
Kiva/Kilo + SB118 presets
[KIVA_KILO] + [SB118_60]
[KIVA_KILO] + [SB118_60_C]
pre-alignment delay values
Kara = 0 ms SB18 = 0 ms
Kara = 4.2 ms
pre-alignment delay values
Kiva = 0 ms
pre-alignment delay values
Kiva/Kilo = 0 ms
Kiva/Kilo = 0 ms
SB18 = 4.2 ms
Kiva/Kilo + SB18 presets
[KIVA_KILO] + [SB18_60]
[KIVA_KILO] + [SB18_60_C]
Kiva + SB15m presets
[KIVA] + [SB15_100]
[KIVA] + [SB15_100_C]
[KIVA_FI] + [SB15_100]
Kiva/SB15m + SB18 presets
[KIVA_SB15] + [SB18_60]
[KIVA_SB15] + [SB18_60_C]
Kiva II + SB15m presets
[KIVA II] + [SB15_100]
[KIVA II] + [SB15_100_C]
[KIVA II_FI] + [SB15_100]
[KIVA II_FI] + [SB15_100_C]
pre-alignment delay values
Kiva/Kilo = 0 ms
Kiva/Kilo = 0 ms
pre-alignment delay values
Kiva = 0 ms
Kiva = 2.4 ms
Kiva = 0 ms
pre-alignment delay values
Kiva/SB15m = 0 ms
Kiva/SB15m = 0 ms
pre-alignment delay values
Kiva II = 0 ms
Kiva II = 2.7 ms
Kiva II = 0 ms
Kiva II = 3 ms
KS28 = 1.3 ms
KS28 = 0 ms
Kilo = 1.5 ms
SB118 = 5.9 ms
SB118 = 0.4 ms
SB18 = 6.3 ms
SB18 = 0.8 ms
SB15m = 1.4 ms
SB15m = 0 ms
SB15m = 0.6 ms
SB18 = 8.5 ms
SB18 = 3 ms
SB15m = 1 ms
SB15m = 0 ms
SB15m = 0.7 ms
SB15m = 0 ms
53 preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
Kiva II + SB15m + SB18 presets
[KIVA II] + [SB15_100] +
[SB18_60]
[KIVA II] + [SB15_100] +
[SB18_60_C]
[KIVA II] + [SB15_100_C] +
[SB18_60]
[KIVA II] + [SB15_100_C] +
[SB18_60_C]
pre-alignment delay values
Kiva II = 0 ms
Kiva II = 0 ms
Kiva II = 2.7 ms
Kiva II = 2.7 ms
SB15m = 1 ms
SB15m = 1 ms
SB15m = 0 ms
SB15m = 0 ms
V-DOSC + SB218 presets
[V-DOSC_xx_X] + [SB218_X]
[V-DOSC_xx_60] + [SB218_60]
V-DOSC + SB28 presets
[V-DOSC_xx_60] + [SB28_60]
[V-DOSC_xx_60] + [SB28_60_C]
V-DOSC + KS28 presets
[V-DOSC_xx_60] + [KS28_60]
[V-DOSC_xx_60] + [KS28_60_C]
pre-alignment delay values
V-DOSC = 1.8 ms
V-DOSC = 0 ms
pre-alignment delay values
V-DOSC = 0 ms
V-DOSC = 1.7 ms
pre-alignment delay values
V-DOSC = 0 ms
V-DOSC = 1.7 ms
V-DOSC + dV-SUB presets
[V-DOSC_xx_X] + [dV-S_X]
pre-alignment delay values
V-DOSC = 0 ms
V-DOSC + dV-SUB + SB218 presets
[V-DOSC_xx_60] + [dV-
S_60_ X] + [SB218_60]
pre-alignment delay values
V-DOSC = 0 ms dV-SUB = 0.2 ms
V-DOSC + dV-SUB + SB28 presets
[V-DOSC_xx_60] + [dV-
S_60_ X] + [SB28_60]
[V-DOSC_xx_60] + [dV-
S_60_ X] + [SB28_60_C]
pre-alignment delay values
V-DOSC = 0 ms dV-SUB = 0.2 ms
V-DOSC = 1.9 ms dV-SUB = 2 ms
V-DOSC + dV-SUB + KS28 presets
[V-DOSC_xx_60] + [dV-
S_60_ X] + [KS28_60]
[V-DOSC_xx_60] + [dV-
S_60_ X] + [KS28_60_C]
pre-alignment delay values
V-DOSC = 0 ms dV-SUB = 0.2 ms
V-DOSC = 1.9 ms dV-SUB = 2 ms
SB18 = 8.5 ms
SB18 = 2.95 ms
SB18 = 11.2 ms
SB18 = 5.65 ms
SB218 = 0 ms
SB218 = 3.8 ms
SB28 = 3.8 ms
SB28 = 0 ms
KS28 = 3.8 ms
KS28 = 0 ms dV-SUB = 0.2 ms
SB218 = 3.7 ms
SB28 = 3.7 ms
SB28 = 0 ms
KS28 = 3.7 ms
KS28 = 0 ms preset libraries preset guide (EN) version 8.1
54
Pre-alignement delay values
V-DOSC + dV-DOSC presets
[V-DOSC_xx_60] + [dV_xx_100]
V-DOSC + dV-DOSC downll presets
[V-DOSC_xx_60] + [dV_xx_100]
dV-DOSC + SB118 presets
[dV_xx_100] + [SB118_100]
[dV_xx_100] + [SB118_100_C]
dV-DOSC + SB218 presets
[dV_xx_100] + [SB218_100]
dV-DOSC + SB18 presets
[dV_xx_100] + [SB18_100]
[dV_xx_100] + [SB18_100_C]
pre-alignment delay values
V-DOSC = 0 ms
pre-alignment delay values
V-DOSC = 0 ms
pre-alignment delay values
dV = 2.7 ms dV = 8.3 ms
pre-alignment delay values
dV = 0.8 ms dV-DOSC = 0 ms dV-DOSC = 0.04 ms
SB118 = 0 ms
SB118 = 0 ms
SB218 = 0 ms
pre-alignment delay values
dV = 2.4 ms dV = 8 ms
SB18 = 0 ms
SB18 = 0 ms
dV-DOSC + SB28 presets
[dV_xx_100] + [SB28_100]
[dV_xx_100] + [SB28_100_C]
dV-DOSC + KS28 presets
[dV_xx_100] + [KS28_100]
[dV_xx_100] + [KS28_100_C]
pre-alignment delay values
dV = 0.8 ms dV = 6.3 ms
pre-alignment delay values
dV = 0.8 ms dV = 6.3 ms
SB28 = 0 ms
SB28 = 0 ms
KS28 = 0 ms
KS28 = 0 ms
dV-DOSC + dV-SUB presets
[dV_xx_100] + [dV-S_100]
pre-alignment delay values
dV = 0 ms
dV-DOSC + dV-SUB + SB118 presets
[dV_xx100] + [dV-
S_60_100] + [SB118_60]
[dV_xx_100] +
[dV-S_60_100] +
[SB118_60_C]
pre-alignment delay values
dV = 0 ms dV-SUB = 0.75 ms dV = 1.5 ms dV-SUB = 2.25 ms dV-SUB = 0 ms
SB118 = 4 ms
SB118 = 0 ms
55 preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
dV-DOSC + dV-SUB + SB218 presets
[dV_xx_100] + [dV-
S_60_100] +[SB218_60]
pre-alignment delay values
dV = 0 ms dV-SUB = 0.75 ms
dV-DOSC + dV-SUB + SB18 presets
[dV_xx_100] + [dV-
S_60_100] + [SB18_60]
[dV_xx_100] + [dV-
S_60_100] + [SB18_60_C]
pre-alignment delay values
dV = 0 ms dV-SUB = 0.75 ms dV = 1.1 ms dV-SUB = 1.85 ms
dV-DOSC + dV-SUB + SB28 presets
[dV_xx_100] + [dV-
S_60_100] + [SB28_60]
[dV_xx_100] + [dV-
S_60_100] + [SB28_60_C]
pre-alignment delay values
dV = 0 ms dV-SUB = 0.75 ms dV = 1 ms dV-SUB = 1.75 ms
dV-DOSC + dV-SUB + KS28 presets
[dV_xx_100] + [dV-
S_60_100] + [KS28_60]
[dV_xx_100] + [dV-
S_60_100] + [KS28_60_C]
pre-alignment delay values
dV = 0 ms dV-SUB = 0.75 ms dV = 1 ms dV-SUB = 1.75 ms
SB218 = 4.5 ms
SB18 = 4.4 ms
SB18 = 0 ms
SB28 = 4.5 ms
SB28 = 0 ms
KS28 = 4.5 ms
KS28 = 0 ms preset libraries preset guide (EN) version 8.1
56
Pre-alignement delay values
Constant curvature WST systems
ARCS + SB118 presets
[ARCS_xx_60] + [SB118_60]
[ARCS_xx_60] + [SB118_60_C]
[ARCS_xx_100] + [SB118_100]
[ARCS_xx_100] + [SB118_100_C]
ARCS + SB18 presets
[ARCS_xx_60] + [SB18_60]
[ARCS_xx_60] + [SB18_60_C]
[ARCS_xx_100] + [SB18_100]
[ARCS_xx_100] + [SB18_100_C]
ARCS + SB218 presets
[ARCS_xx_60] + [SB218_60]
[ARCS_xx_100] + [SB218_100]
ARCS + SB28 presets
[ARCS_xx_60] + [SB28_60]
[ARCS_xx_60] + [SB28_60_C]
[ARCS_xx_100] + [SB28_100]
[ARCS_xx_100] + [SB28_100_C]
ARCS + KS28 presets
[ARCS_xx_60] + [KS28_60]
[ARCS_xx_60] + [KS28_60_C]
[ARCS_xx_100] + [KS28_100]
[ARCS_xx_100] + [KS28_100_C]
ARCS II + SB28 presets
[ARCS_II] + [SB28_60]
[ARCS_II] + [SB28_60_C]
ARCS II + KS28 presets
[ARCS_II] + [KS28_60]
[ARCS_II] + [KS28_60_C]
pre-alignment delay values
ARCS = 0.8 ms
ARCS = 6.3 ms
ARCS = 1.4 ms
ARCS = 6.9 ms
pre-alignment delay values
ARCS = 0.4 ms
ARCS = 5.9 ms
ARCS = 1.1 ms
ARCS = 6.6 ms
pre-alignment delay values
ARCS = 0 ms
ARCS = 0 ms
pre-alignment delay values
ARCS = 0 ms
ARCS = 4.9 ms
ARCS = 0 ms
ARCS = 5.0 ms
pre-alignment delay values
ARCS = 0 ms
ARCS = 4.9 ms
ARCS = 0 ms
ARCS = 5.0 ms
pre-alignment delay values
ARCS II = 0 ms
ARCS II = 2.9 ms
pre-alignment delay values
ARCS II = 0 ms
ARCS II = 2.9 ms
57
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB218 = 0.9 ms
SB218 = 0.3 ms
SB28 = 0.6 ms
SB28 = 0 ms
SB28 = 0.5 ms
SB28 = 0 ms
SB28 = 0.6 ms
SB28 = 0 ms
SB28 = 0.5 ms
SB28 = 0 ms
SB28 = 2.6 ms
SB28 = 0 ms
KS28 = 2.6 ms
KS28 = 0 ms
preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
ARCS Wide/Focus + SB18m presets
[ARCS_WIFO] or [ARCS_WIFO_FI] +
[SB18_60]
[ARCS_WIFO] or [ARCS_WIFO_FI] +
[SB18_60_C]
pre-alignment delay values
ARCS Wide/Focus = 1.7 ms
ARCS Wide/Focus = 7.2 ms
SB18m = 0 ms
SB18m = 0 ms preset libraries preset guide (EN) version 8.1
58
Pre-alignement delay values
Coaxial loudspeaker enclosures
[xx_MO] presets for the X series use the amplied controller low latency operating mode. When used along with subwoofers, it is recommended to use the subwoofers in low latency operating mode. To achieve this, create custom presets combining low latency channel sets and subwoofer channel sets.
If the subwoofers are driven from a dedicated amplied controller using a subwoofer factory preset, they are operated in normal latency mode. Therefore, an additional delay should be set to the [xx_MO] low latency channels to align them: 2.65 ms on LA8 or 3.08 ms on LA4X and LA12X.
X15 HiQ + SB18 presets
[X15] + [SB18_100]
[X15_MO] + [SB18_100]
pre-alignment delay values
X15 HiQ = 0 ms
X15 HiQ = 0 ms
SB18 = 0 ms
SB18 = 0 ms
X12 + SB15m presets
[X12] + [SB15_100]
[X12_MO] + [SB15_100]
pre-alignment delay values
X12 = 0 ms
X12 = 0 ms
SB15m = 2.8 ms
SB15m = 2.8 ms
X12 + SB18 presets
[X12] + [SB18_100]
[X12_MO] + [SB18_100]
X8 + SB15m presets
[X8] + [SB15_100]
[X8_MO] + [SB15_100]
pre-alignment delay values
X12 = 0 ms
X12 = 0 ms
pre-alignment delay values
X8 = 0 ms
X8 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB15m = 2.6 ms
SB15m = 2.6 ms
115XT HiQ + SB118 presets
[HIQ_FI_100] + [SB118_100]
[HIQ_FR_100] + [SB118_100]
[HIQ_MO_100] + [SB118_100]
115XT HiQ + SB18 presets
[HIQ_FI_100] + [SB18_100]
[HIQ_FR_100] + [SB18_100]
[HIQ_MO_100] + [SB18_100]
115XT HiQ + dV-SUB presets
[HIQ_FI_100] + [dV-S_100]
[HIQ_FR_100] + [dV-S_100]
[HIQ_MO_100] + [dV-S_100]
pre-alignment delay values
HiQ = 2.6 ms
HiQ = 2.6 ms
HiQ = 2.5 ms
pre-alignment delay values
HiQ = 2.3 ms
HiQ = 2.3 ms
HiQ = 2.2 ms
pre-alignment delay values
HiQ = 0.6 ms
HiQ = 0.6 ms
HiQ = 0.5 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms dV-SUB = 0 ms dV-SUB = 0 ms dV-SUB = 0 ms
59 preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
Active 12XT + SB118 presets
[12XTA_FI_100] + [SB118_100]
[12XTA_FR_100] + [SB118_100]
[12XTA_MO_100] + [SB118_100]
Active 12XT + SB18 presets
[12XTA_FI_100] + [SB18_100]
[12XTA_FR_100] + [SB18_100]
[12XTA_MO_100] + [SB18_100]
Passive 12XT + SB118 presets
[12XTP_FI_100] + [SB118_100]
[12XTP_FR_100] + [SB118_100]
[12XTP_MO_100] + [SB118_100]
Passive 12XT + SB18 presets
[12XTP_FI_100] + [SB18_100]
[12XTP_FR_100] + [SB18_100]
[12XTP_MO_100] + [SB18_100]
8XT + SB118 presets
[8XT_FI_100] + [SB118_100]
[8XT_FR_100] + [SB118_100]
[8XT_MO_100] + [SB118_100]
8XT + SB18 presets
[8XT_FI_100] + [SB18_100]
[8XT_FR_100] + [SB18_100]
[8XT_MO_100] + [SB18_100]
5XT + SB15m presets
[5XT] + [SB15_100]
115XT + SB118 presets
[115XT_FI_100] + [SB118_100]
[115XT_FR_100] + [SB118_100]
[115XT_MO_100] + [SB118_100]
pre-alignment delay values
12XTA = 2.6 ms
12XTA = 2.6 ms
12XTA = 2.5 ms
pre-alignment delay values
12XTA = 2.3 ms
12XTA = 2.3 ms
12XTA = 2.2 ms
pre-alignment delay values
12XTP = 2.4 ms
12XTP = 2.4 ms
12XTP = 2.4 ms
pre-alignment delay values
12XTP = 2.1 ms
12XTP = 2.1 ms
12XTP = 2.1 ms
pre-alignment delay values
8XT = 3.1 ms
8XT = 3.2 ms
8XT = 3.0 ms
pre-alignment delay values
8XT = 2.8 ms
8XT = 2.9 ms
8XT = 2.7 ms
pre-alignment delay values
5XT = 0.3 ms
pre-alignment delay values
115XT = 2.6 ms
115XT = 2.5 ms
115XT = 2.9 ms preset libraries preset guide (EN) version 8.1
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB15 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
60
115XT + SB18 presets
[115XT_FI_100] + [SB18_100]
[115XT_FR_100] + [SB18_100]
[115XT_MO_100] + [SB18_100]
Active MTD115 + SB118 presets
[115bA_FI_100] + [SB118_100]
[115bA_FR_100] + [SB118_100]
[115bA_MO_100] + [SB118_100]
Active MTD115 + SB18 presets
[115bA_FI_100] + [SB18_100]
[115bA_FR_100] + [SB18_100]
[115bA_MO_100] + [SB18_100]
Passive MTD115 + SB118 presets
[115bP_FI_100] + [SB118_100]
[115bP_FR_100] + [SB118_100]
[115bP_MO_100] + [SB118_100]
Passive MTD115 + SB18 presets
[115bP_FI_100] + [SB18_100]
[115bP_FR_100] + [SB18_100]
[115bP_MO_100] + [SB18_100]
112XT + SB118 presets
[112XT_FI_100] + [SB118_100]
[112XT_FR_100] + [SB118_100]
[112XT_MO_100] + [SB118_100]
112XT + SB18 presets
[112XT_FI_100] + [SB18_100]
[112XT_FR_100] + [SB18_100]
[112XT_MO_100] + [SB18_100]
pre-alignment delay values
115XT = 2.3 ms
115XT = 2.2 ms
115XT = 2.6 ms
pre-alignment delay values
115bA = 2.4 ms
115bA = 2.5 ms
115bA = 2.7 ms
pre-alignment delay values
115bA = 2.1 ms
115bA = 2 ms
115bA = 2.4 ms
pre-alignment delay values
115bP = 2.1 ms
115bP = 2.2 ms
115bP = 2.8 ms
pre-alignment delay values
115bP = 1.8 ms
115bP = 1.9 ms
115bP = 2.5 ms
pre-alignment delay values
112XT = 2.3 ms
112XT = 2.3 ms
112XT = 2.6 ms
pre-alignment delay values
112XT = 2 ms
112XT = 2 ms
112XT = 2.3 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
Pre-alignement delay values
61 preset libraries preset guide (EN) version 8.1
Pre-alignement delay values
MTD112b + SB118 presets
[112b_FI_100] + [SB118_100]
[112b_FR_100] + [SB118_100]
[112b_MO_100] + [SB118_100]
MTD112b + SB18 presets
[112b_FI_100] + [SB18_100]
[112b_FR_100] + [SB18_100]
[112b_MO_100] + [SB18_100]
MTD108a + SB118 presets
[108a_FI_100] + [SB118_100]
[108a_FR_100] + [SB118_100]
[108a_MO_100] + [SB118_100]
MTD108a + SB18 presets
[108a_FI_100] + [SB18_100]
[108a_FR_100] + [SB18_100]
[108a_MO_100] + [SB18_100]
pre-alignment delay values
112b = 2.4 ms
112b = 2.5 ms
112b = 3.0 ms
pre-alignment delay values
112b = 2.1 ms
112b = 2.2 ms
112b = 2.7 ms
pre-alignment delay values
108a = 3.5 ms
108a = 3.6 ms
108a = 4.0 ms
pre-alignment delay values
108a = 3.2 ms
108a = 3.3 ms
108a = 3.7 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB118 = 0 ms
SB18 = 0 ms
SB18 = 0 ms
SB18 = 0 ms preset libraries preset guide (EN) version 8.1
62
Enclosure drive capacity per amplied controller
Enclosure drive capacity per amplied controller
Enclosure drive capacity per LA4
Maximum number of coaxial enclosures per LA4
Loudspeaker enclosure
5XT
8XT
Active 12XT
Passive 12XT
112XT
115XT HiQ
115XT
MTD108a
MTD112b
Active MTD115b
Passive MTD115b
Maximum number of connections per output*
1
1
1
2
1
2
1
2
1
3
2
Maximum number of constant curvature WST enclosures per LA4
Loudspeaker enclosure
ARCS Wide / ARCS Focus
ARCS
Maximum number of connections per output*
1
1
Maximum number of variable curvature WST enclosures per LA4
Loudspeaker enclosure
Kiva / Kilo
Maximum number of connections per output*
2
Maximum number of enclosures per controller
12
8
4
4
4
2
2
8
4
2
4
Maximum number of enclosures per controller
4
2
Maximum number of enclosures per controller
8
Maximum number of subwoofer enclosures per LA4
Loudspeaker enclosure
SB15m
SB18
Maximum number of connections per output*
1
1
Maximum number of enclosures per controller
4
4
SB118 1 4
*
For passive loudspeakers, the value corresponds to the number of enclosures in parallel on the output. For active loudspeakers, the value corresponds to the number of sections in parallel on the output.
63 preset libraries preset guide (EN) version 8.1
Enclosure drive capacity per amplied controller
Enclosure drive capacity per LA4X
Maximum number of coaxial enclosures per LA4X
Loudspeaker enclosure
5XT
X8
X12
X15 HiQ
8XT
Active 12XT
Passive 12XT
115XT HiQ
Maximum number of connections per output*
4
2
1
1
1
2
2
1
Maximum number of constant curvature WST enclosures per LA4X
Loudspeaker enclosure
ARCS Wide / ARCS Focus
ARCS II
Maximum number of connections per output*
1
1
Maximum number of enclosures per controller
16
8
4
2
8
4
4
2
Maximum number of enclosures per controller
4
2
Maximum number of variable curvature WST enclosures per LA4X
Loudspeaker enclosure
Kiva / Kilo
Kiva II
Kara
K2
Kudo
Maximum number of connections per output*
2
1
1
2
2
Maximum number of enclosures per controller
8
1
1
8
4
Maximum number of subwoofer enclosures per LA4X
Loudspeaker enclosure Maximum number of connections per output*
1
Maximum number of enclosures per controller
4 SB15m
SB18 1 4
*
For passive loudspeakers, the value corresponds to the number of enclosures in parallel on the output. For active loudspeakers, the value corresponds to the number of sections in parallel on the output.
For ARCS, SB118, the MTD series, 112XT and 115XT, refer to the enclosure drive capacity table for LA4.
preset libraries preset guide (EN) version 8.1
64
Enclosure drive capacity per amplied controller
Enclosure drive capacity per LA8
Maximum number of coaxial enclosures per LA8
Loudspeaker enclosure
5XT
X8
X12
X15 HiQ
8XT
Active 12XT
Passive 12XT
112XT
115XT
115XT HiQ
MTD108a
MTD112b
Active MTD115b
Passive MTD115b
Maximum number of connections per output*
6
2
2
2
3
2
3
3
3
2
2
3
3
2
Maximum number of constant curvature WST enclosures per LA8
Loudspeaker enclosure
ARCS Wide / ARCS Focus
ARCS II
ARCS
Maximum number of connections per output*
2
2
3
Maximum number of variable curvature WST enclosures per LA8
Loudspeaker enclosure
Kiva / Kilo
Kiva II
Kara
K2
K1
K1-SB
Kudo
V-DOSC dV-DOSC
Maximum number of connections per output*
3
2
3
2
1
3
3
3
4
Maximum number of enclosures per controller
24
4
12
8
8
8
4
4
12
8
6
6
6
8
Maximum number of enclosures per controller
8
4
6
Maximum number of enclosures per controller
12
16
2
4
6
3
3
2
6
65 preset libraries preset guide (EN) version 8.1
Enclosure drive capacity per amplied controller
Maximum number of subwoofer enclosures per LA8
Loudspeaker enclosure
SB15m
SB18
SB28
SB118
SB218
Maximum number of connections per output*
2
2
1
2
1
Maximum number of enclosures per controller
6
8
4
8
4 dV-SUB 1 4
*
For passive loudspeakers, the value corresponds to the number of enclosures in parallel on the output. For active loudspeakers, the value corresponds to the number of sections in parallel on the output.
Make sure the total number of connected enclosures does not exceed the maximum number of enclosures per controller.
LA8 can drive up to three X8 per output, but no more than eight per controller. LA8 can drive up to two SB15m per output, but no more than six per controller.
preset libraries preset guide (EN) version 8.1
66
Enclosure drive capacity per amplied controller
Enclosure drive capacity per LA12X
Maximum number of coaxial enclosures per LA12X
Loudspeaker enclosure
5XT
X8
X12
X15 HiQ
8XT
Active 12XT
Passive 12XT
115XT HiQ
Maximum number of connections per output*
6
3
3
3
3
3
3
3
Maximum number of constant curvature WST enclosures per LA12X
Loudspeaker enclosure
ARCS Wide / ARCS Focus
ARCS II
Maximum number of connections per output*
3
3
Maximum number of enclosures per controller
24
12
12
6
12
6
12
6
Maximum number of enclosures per controller
12
6
Maximum number of variable curvature WST enclosures per LA12X
Loudspeaker enclosure
Kiva
Kiva II
Kara
K2
K1
K1-SB
Maximum number of connections per output*
3
3
2
6
3
1
Maximum number of enclosures per controller
12
3
2
24
6
4
Maximum number of subwoofer enclosures per LA12X
Loudspeaker enclosure
SB15m
SB18
SB28
Maximum number of connections per output*
3
3
1
Maximum number of enclosures per controller
12
12
4
KS28 1 4
*
For passive loudspeakers, the value corresponds to the number of enclosures in parallel on the output. For active loudspeakers, the value corresponds to the number of sections in parallel on the output.
For 112XT, 115XT, the MTD series, ARCS, dV-DOSC, Kudo, V-DOSC, KILO, SB118, SB218 and dV-SUB, refer to the enclosure drive capacity table for LA8.
67 preset libraries preset guide (EN) version 8.1
Atsisiųsti
Vieša nuoroda atnaujinta
Vieša nuoroda į jūsų pokalbį buvo atnaujinta. You may view and manage your chat links after registration here.
Dokumento vieša nuoroda
Reklama