Pentax Optio Optio S-55 Operating Manual

Digital Camera
Operating Manual
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
Thank you for purchasing the PENTAX Digital Camera.
Please read this manual before using the camera in order to get the most
out of all the features and functions. Keep this manual safe, as it can be a
valuable tool in helping you to understand all the camera’s capabilities.
Regarding copyrights
Images taken using the PENTAX Digital Camera that are for anything other than
personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are even cases where
limitations are placed on taking pictures even for personal enjoyment during
demonstrations, performances or of items on display. Images taken with the
purpose of obtaining copyrights also cannot be used outside the scope of use of
the copyright as laid out in the Copyright Act, and care should be taken here also.
To users of this camera
• There is a possibility that recorded data may be erased or that the camera may
not function correctly when used in surroundings such as installations
generating strong electromagnetic radiation or magnetic fields.
• The liquid crystal panel used in the LCD display is manufactured using
extremely high precision technology. Although the level of functioning pixels is
99.99% or better, you should be aware that 0.01% or fewer of the pixels may
not illuminate or may illuminate when they should not. However, this has no
effect on the recorded image.
Regarding trademarks
• PENTAX, Optio and smc PENTAX are trademarks of PENTAX Corporation.
• The SD logo
is a trademark.
• All other brands or product names are trademarks or registered trademarks of
their respective owners.
This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to produce
images more faithful to their intentions. Some functions are not available on
printers that are not PRINT Image Matching III compliant. Copyright 2001 Seiko
Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
Regarding PictBridge
• PictBridge allows the user to connect the printer and digital camera directly,
using the unified standard for the direct printout of images. You can print images
directly from the camera through a few simple operations.
• There is a possibility that the illustrations and the display screen of the LCD
monitor in this manual are different form the actual product.
FOR SAFE USE OF YOUR CAMERA
Sufficient attention has been paid to the safety of this product but please
pay particular attention to the warnings indicated by the following
symbols during use.
Warning These symbols indicate that it is possible that the user
may experience serious difficulties if the warnings are
not heeded.
Caution These symbols indicate that it is possible that the user
may experience minor or middling difficulties or
physical difficulties if the warnings are not heeded.
About the Camera
Warning
• Do not attempt to take the camera apart or remodel the camera. High
voltages are present within the camera, and there is therefore a danger of
electric shocks if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for
example, the camera being dropped, please do not under any
circumstances touch such exposed portions, as there is a danger of
receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their
necks.
• To avoid the risk of it being swallowed by mistake, keep the SD Memory
Card out of the reach of small children. Seek medical attention immediately
if a memory card is accidentally swallowed.
• Use an AC adapter that is of the power and voltage specified for exclusive
use with this product. The use of an AC adapter other than that specified
exclusively for use with this product may cause fire or electric shocks.
• If the camera emits smoke or a strange smell, or in the event of any other
irregularity, stop using the camera immediately, remove the battery or
disconnect the AC adapter and contact your nearest PENTAX service
center. Continued use of the camera may result in fire or electric shock.
1
Caution
• Never try to disassemble or short the battery. Also, do not dispose of the
battery in fire, as it may explode.
• Do not charge any batteries other than rechargeable Ni-MH batteries. The
battery could explode or catch fire. The batteries that can be used in this
camera, only the Ni-MH battery can be recharged.
• Do not place your finger on the flash when it is discharging as there is a
risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a
risk of discoloring.
• If any of the battery leakage should come in contact with your eyes, do not
rub them. Flush your eyes with clean water and get medical attention
immediately.
• If any of the battery leakage should come in contact with skin or clothes,
wash the affected areas thoroughly with water.
• Remove the battery from the camera immediately if it becomes hot or
begins to smoke. Be careful not to burn yourself during removal.
• Some portions of the camera heat up during use, so please take care, as
there is a risk of low temperature burns if such portions are held for long
periods of time.
• Should the LCD be damaged, be careful of glass fragments. Also, be careful
not to allow the liquid crystal to get on your skin or in your eyes or in your
mouth.
Handling precautions for batteries
• This camera uses two AA alkaline, AA lithium, AA Ni-MH, AA nickel
manganese batteries or one CR-V3 battery. Do not use batteries other
than those specified here. Using some other type of battery may cause the
camera to function poorly, or the batteries may rupture or cause a fire.
• AA alkaline, AA lithium, AA nickel manganese and CR-V3 batteries cannot
be recharged. Do not try to take the batteries apart. The batteries may
rupture or leak if you try to charge them or take them apart.
• Do not replace the batteries with batteries that are different brands, types
or capacities. Also, do not combine old batteries with new ones. Doing so
may cause the batteries to rupture or cause a fire.
• Do not insert the batteries with the positive (+) and negative (-) poles in the
wrong orientation. Doing so may cause the batteries to rupture or cause a
fire.
2
About the AC Adapter
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still
plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an
electrical shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
3
Care to be Taken During Handling
• Take the international warranty card with you when you travel abroad.
Also take the Worldwide Service Network that is included in the package.
This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or during traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
• The lens on this camera is not exchangeable. The lens is not removable.
• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
• Places of high temperature and humidity should be avoided. Particular
care should be taken regarding vehicles, which can become very hot
inside.
• Storing the camera where pesticides and chemicals are handled should be
avoided. Remove from case and store in a well-ventilated place to prevent
the camera from becoming moldy during storage.
• Do not use the camera where it may come in contact with rain, water or any
other liquid, because the camera is not weather, water, or liquid resistant.
• Ensure that the camera is not subjected to substantial vibrations, shocks
or pressure. Place the camera on a cushion for protection when the
camera is subjected to the vibrations of a motorbike, car, or ship, etc.
• The temperature range in which the camera can be used is 0°C to
40°C (32°F to 104°F).
• The liquid crystal display will become black at high temperatures but will
return to normal when normal temperatures are returned to.
• The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not
a fault.
• Periodic checks are recommended every 1 to 2 years in order to maintain
high performance.
4
• If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera.
Therefore put the camera in a bag or plastic bag, and take the camera out
when the difference in temperature has subsided.
• Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc.
as this may cause damage to the camera. If rain or drops of water get onto
the camera, please wipe dry.
• Refer to “Precautions When Using an SD Memory Card” (p.22) regarding
the SD Memory Card.
• Please do not press forcefully on the LCD monitor. This could cause
breakage or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the LCD monitor.
• When using a tripod with the camera, be careful not to overtighten
the screw in the tripod socket on the camera.
5
Contents
FOR SAFE USE OF YOUR CAMERA .............................................1
Care to be Taken During Handling ...................................................4
Contents ...........................................................................................6
Contents of the Operating Manual..................................................11
Checking the Contents of the Package ..........................................12
Names of Parts...............................................................................13
Names of Operating Parts ..............................................................14
Getting Started
15
Attaching the Strap.............................................................................15
Powering the Camera .........................................................................16
Installing the Batteries ....................................................................16
Using the AC Adapter (optional).....................................................18
Using the AC Adapter Overseas ....................................................19
Installing the SD Memory Card..........................................................21
Recorded Pixels and Quality ..........................................................23
Turning the Camera On and Off ........................................................25
Playback Only Mode.......................................................................26
Voice Recording Only Mode...........................................................26
Initial Setting .......................................................................................27
Setting the Display Language.........................................................27
Setting the Date and Time..............................................................28
Quick Start
30
Taking Still Pictures............................................................................30
Playing Back Still Pictures.................................................................32
Playing Back Images ......................................................................32
Playing Back the Previous or Next Image ......................................32
Rotating the Displayed Image ........................................................33
Common Operations
34
Using the Button Functions...............................................................34
Capture Mode.................................................................................34
Playback Mode ...............................................................................35
Voice Recording Mode ...................................................................36
Using the Menus .................................................................................37
How to Use the Menus ...................................................................37
Example of Menu Operation...........................................................38
Enlarging a Menu Display...............................................................40
Menu List ........................................................................................41
6
Taking Pictures
44
Taking Pictures ...................................................................................44
Changing the Mode ........................................................................44
Selecting the Capture Mode ...........................................................44
Displaying Shooting Information in Capture Mode .........................45
Letting the Camera Set the Functions (Auto Select Mode) ............47
Using the Help Function .................................................................48
Setting the Functions (Program Mode)...........................................49
Selecting the Picture Mode According to the Shooting Scene
(Picture Mode) ................................................................................50
Taking Pictures of Dark Scenes (Night-Scene Mode) ....................52
Taking Landscape Views (Landscape Mode).................................53
Taking Portrait Pictures (Portrait Mode) .........................................53
Taking Movies (Movie Mode) .........................................................54
Using the Zoom ..............................................................................56
Using the Self-Timer.......................................................................58
Continuous Shooting (Continuous Shooting Mode) .......................59
Using the Remote Control Unit (optional).......................................60
Taking Pictures with Color Filters (Digital Filter Mode)...................61
Taking Two-in-One Pictures (Two-in-One Mode) ...........................62
Taking Panorama Pictures (Panorama Assist Mode).....................63
Setting the Shooting Functions.........................................................65
Selecting the Focus Mode ..............................................................65
Selecting the Flash Mode ...............................................................67
Selecting the Recorded Pixels........................................................68
Selecting the Quality Level .............................................................69
Selecting the Image Quality............................................................70
Adjusting the White Balance...........................................................71
Changing the Focusing Area ..........................................................73
Setting the Light Metering Mode to Determine the Exposure
(AE Metering) .................................................................................74
Setting the Sensitivity .....................................................................75
Setting the Frame Rate ..................................................................76
Setting the Instant Review Time (Instant Review)..........................77
Setting the Image Sharpness (Sharpness).....................................78
Setting the Color Saturation (Saturation)........................................79
Setting the Image Contrast (Contrast)............................................80
Setting the Exposure (EV Compensation)......................................81
Saving the Settings.............................................................................82
Saving the Menu Items (Memory) ..................................................82
Recording and Playback of Sound
84
Recording Sound (Voice Recording Mode)......................................84
Playing Back Sound ...........................................................................85
Adding Sound (Voice Memo) to Images ...........................................86
Recording a Voice Memo ...............................................................86
Playing Back a Voice Memo...........................................................88
7
Playback/Deleting/Editing
90
Playing Back Images ..........................................................................90
Playing Back Still Pictures ..............................................................90
Zoom Display..................................................................................90
Playing Back Movies ......................................................................92
Displaying Shooting Information in Playback Mode .......................93
Nine Image Display ........................................................................94
Slideshow .......................................................................................95
Deleting................................................................................................96
Deleting Individual Images or Sounds ............................................96
Deleting All Images.........................................................................98
Protecting Images and Sounds from Deletion (Protect) .................99
Viewing Images on a TV ...................................................................101
Using the Remote Control Unit (optional) to View
the Previous or the Next Image ....................................................102
Setting the Printing Service (DPOF)................................................103
Printing Single Images..................................................................103
Printing All Images........................................................................105
Direct Printing Using PictBridge .....................................................106
Connecting the Camera to the Printer ..........................................106
Printing Single Images..................................................................107
Printing All Images........................................................................108
Printing Using the DPOF Settings ................................................108
Disconnecting the Camera from the Printer .................................109
Editing Images ..................................................................................110
Changing the Image Size and Quality ..........................................110
Editing Pictures with Digital Filters ...............................................112
Copying Files ....................................................................................114
Settings
116
Camera Settings................................................................................116
Formatting an SD Memory Card or the Built-in Memory ..............116
Changing the Sound Settings.......................................................117
Changing the Date and Time........................................................118
Setting the World Time .................................................................120
Changing the Start-up Screen, Background Color and
Screen Effects ..............................................................................122
Changing the Display Language ..................................................124
Adjusting the Brightness of the LCD Monitor................................124
Changing the Video Output Format..............................................125
Changing the USB Connection Mode...........................................126
Setting Auto Power Off .................................................................127
Resetting to Default Settings (Reset) ...........................................127
Registering Functions...................................................................128
8
Appendix
130
List of City Codes .............................................................................130
Optional Accessories .......................................................................131
Messages...........................................................................................132
Troubleshooting................................................................................134
Main Specifications ..........................................................................136
WARRANTY POLICY.........................................................................140
9
Memo
10
Contents of the Operating Manual
This operating manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera before you start
taking pictures. Be sure to read it and follow the instructions.
2 Quick Start ––––––––––––––––––––––––––––––––––––––––––––
This chapter explains the simplest way to take pictures and play back images. Use it if
you want to start taking pictures straightaway.
3 Common Operations ––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the buttons and how
to use the menus. For more details, refer to the respective “Taking Pictures”,
“Recording and Playback”, “Playback/Deleting/Editing” and “Settings” chapters.
4 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set the relevant
functions, including how to change the Capture mode.
5 Recording and Playback of Sound–––––––––––––––––––––––––
This chapter explains how to record sound only or add a sound (voice memo) to an
image, and how to play back voice memos.
6 Playback/Deleting/Editing ––––––––––––––––––––––––––––––––
This chapter explains how to view images on the camera or on a TV, how to delete and
resize images, and how to print images by connecting the camera directly to a printer.
7 Settings –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains how to set the camera-related functions.
1
2
3
4
5
6
7
8 Appendix––––––––––––––––––––––––––––––––––––––––––––––
This tells you about the messages displayed on the LCD monitor and what to do in the
event of trouble.
8
The meanings of the symbols used in this operating manual are explained below.
1
indicates the reference page number for an explanation of the
related operation.
indicates information that is useful to know.
indicates precautions to be taken when operating the camera.
The icons above the title show the Capture modes that can
R, d, -, =, activate the function.
H, ., C, O, + Ex.)
R+.
Setting the Image Sharpness (Sharpness)
11
Checking the Contents of the Package
Camera
Optio S55
Strap
O-ST20 (∗)
Software (CD-ROM)
S-SW32
AV cable
I-AVC7 (∗)
USB cable
I-USB7 (∗)
Two AA alkaline batteries
PC Connection Manual
ACDSee for PENTAX
User Guide
Digital Camera
Operating Manual
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
Operating Manual
(this manual)
Items marked with an asterisk (∗) are also available as optional accessories.
For other optional accessories, refer to “Optional Accessories” (p.131).
12
Names of Parts
Front
Shutter release button
Remote control receiver
Self-timer lamp
Power switch
Flash
Speaker
Microphone
Lens
Terminal cover
PC/AV terminal
DC input terminal
Back
Flash status lamp (red)
Focus status lamp (green)
Mode dial
Card cover release lever
Strap lug
Card cover
Battery cover
LCD monitor
Tripod socket
13
Names of Operating Parts
DISPLAY button
i Delete button
Power switch
Shutter release button
Zoom /w/x/f/y button
Q Playback button
OK button
Four-way controller
4 (b) 5 (zqs)
2 (gj) 3
MENU button
0 button
Guide Indications
A guide to available button operations appears on the LCD monitor
during operation.
The buttons are indicated as shown below.
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
MENU button
14
2
3
4
5
MENU
Zoom /f/y button
When digital zoom is enabled
DISPLAY button
i Delete button
OK button
0 button
y
DISP
OK
?/FN
Getting Started
Attaching the Strap
1
Getting Started
Pass the narrow end of the strap through the strap lug and pass the other
end through the loop.
15
Powering the Camera
1
1
Getting Started
2
1
2
2
(when using AA batteries)
(when using a CR-V3 battery)
Installing the Batteries
Insert the batteries in the camera. Use two AA alkaline, AA lithium, AA
Ni-MH, or AA nickel manganese batteries or one CR-V3 battery.
1
2
3
Open the battery cover.
Slide the battery cover in the direction indicated by the arrow 1 and
flip the cover open 2 .
Insert the batteries according to the (+) and (–)
indicators on the battery chamber.
Close the battery cover and slide it back into place to lock it.
If you intend to use the camera continuously for a long period, use of the AC
adapter D-AC5 (optional) is recommended. (p.18)
• AA alkaline, AA lithium, AA nickel manganese and CR-V3 batteries are not
rechargeable.
• Do not open the battery cover or remove the batteries when the camera is
turned on.
• If you do not intend to use the camera for a long time, remove the batteries,
otherwise the batteries may leak.
• The “Battery depleted” error message may appear when you turn on the power
after purchasing the camera or after replacing the batteries if the batteries had
been removed for a long time. However, this is not an error. Wait a short period
and then turn the power switch on again, the power should come on normally.
If this happens, the date and time, recorded pixels and other settings may be
initialized, reset the various settings according to the procedures in “Setting the
Shooting Functions” (p.65 to 81) and “Camera Settings” (p.116 to 129).
• Insert the batteries correctly. If the batteries are incorrectly oriented,
malfunction may result. Also, carefully clean the batteries’ terminals.
16
• Number of Recordable Images and Playback Time
(at 23°C with new batteries)
The following shows the number of shots and playback time possible
when using various batteries.
Battery Type
Playback Time*2
CR-V3
AA Ni-MH batteries
AA nickel manganese batteries
AA alkaline batteries
370 pictures
230 pictures
90 pictures
30 pictures
450 minutes
250 minutes
180 minutes
50 minutes
*1 The image storage capacity is a guideline based on CIPA standard measurement
conditions, and may vary depending on actual shooting conditions of use.
(Measuring conditions: LCD monitor is on, 50% flash use, 23°C.)
*2 The playback times are a guideline based on PENTAX measuring conditions and
may vary depending on the actual shooting conditions of use.
1
Getting Started
Image Storage Capacity*1
(using the flash for 50% of shots)
• In general, battery performance temporarily deteriorates as the temperature
decreases. When using the camera in a cold environment, keep it warm by
putting it in your pocket or inside your coat. Battery performance that has
deteriorated due to low temperature will be restored when the battery is
returned to room temperature.
• Due to the characteristics of AA alkaline batteries, camera performance may
deteriorate. AA alkaline battery is not recommended except for emergencies.
• Due to the characteristics of AA alkaline batteries, AA nickel manganese
battery, camera performance may deteriorate at low temperatures. Use of
other batteries (such as CR-V3) is recommended when using the camera at
low temperatures.
• Be sure to take spare batteries with you when traveling abroad or to a cold
region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the # symbol on the LCD monitor.
#
(lit green)
: Adequate power remains.
↓
$
(lit yellow)
: Battery is running very low.
↓
%
(lit red)
: Battery is exhausted.
↓
[Battery Depleted]
: The camera will turn off after the message appears.
When using AA nickel manganese batteries, the battery strength may not be
properly displayed due to the characteristics of this kind of battery. The battery
level indicator may show # even after using the batteries for a long time. The
camera also may turn off, without warning while the battery level indicator still
shows #.
17
DC terminal
AC adapter
To power outlet
1
1
Getting Started
3
2
∗
AC power cable
Using the AC Adapter (optional)
If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC5 is recommended.
1
2
3
4
Make sure that the camera is turned off and open the
terminal cover.
Connect the DC terminal on the AC adapter to the DC
input terminal on the camera.
Connect the AC power cable to the AC adapter.
Plug the AC power cable into the power outlet.
• Make sure that the camera is turned off when connecting or
disconnecting the AC adapter.
• Make sure that the AC power cable and connecting cable are inserted
securely. The data may be lost if the cable becomes disconnected
while you are taking pictures.
• If the terminal cover on the camera gets caught in the grooves of the
DC terminal (indicated by ∗ in the illustration), the DC terminal may
become disconnected. Take care that the grooves on the DC terminal
are not in a position to catch on the terminal cover when using the AC
adapter.
• To avoid the risk of fire or electric shock when using the AC adapter,
be sure to read “FOR SAFE USE OF YOUR CAMERA” (p.1).
• Be sure to read the operation manual accompanying the AC adapter
D-AC5 before using the adapter.
• The batteries inside the camera cannot be recharged by connecting
the AC adapter.
18
Using the AC Adapter Overseas
1
Getting Started
AC adapter D-AC5 (optional) is designed to switch automatically to the
voltage (100-240V) and frequency (50Hz, 60Hz) of the electricity supply
in the country or region where used.
However, electrical socket shapes differ depending on the country or
region. Before traveling abroad, you are advised to check the socket
shape in your destination (see “Main Socket Types in the Major
Countries and Regions of the World” (p.20)) and take an appropriately
shaped adapter plug with you.
The socket shape does not affect the charging method.
Adapter plug
• Use of an off-the-shelf transformer may lead to defective operation.
• Unplug the adapter plug from the power outlet when the battery
charging stand is not in use.
Type
A
B
BF
C
S
Shape
Adapter
plug
—
19
Main Socket Types in the Major Countries and Regions of the
World
1
A
North America U.S.A., Canada
B
BF
Getting Started
Europe,
Iceland, Ireland, Italy, Ukraine, Austria,
Former Soviet Netherlands, Kazakhstan, Greece, Sweden,
Union
Denmark, Germany, Norway, Hungary, Finland,
France, Belarus, Belgium, Rumania, Russia
9
Taiwan, Japan
9
9
Switzerland, Poland, Portugal
Asia
9
9
9
9
Sri Lanka, Maldives
9
Nepal, Bangladesh, Mongolia
Vietnam
9
9
India, Indonesia, Pakistan, Macau
9
Korea
9
Philippines
9
Singapore, Hong Kong
9
Malaysia
Oceania
9
9
Thailand
China
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
Tahiti
Central and
South
America
9
Colombia, Jamaica, Haiti, Panama, Bahamas,
Puerto Rico, Venezuela, Mexico
9
Brazil, Peru
9
Chile
9
9
Argentina
Middle East
Africa
9
9
Israel, Iran
Kuwait
9
Jordan
9
9
9
Canary Islands, Guinea, Mozambique, Morocco
Algeria
9
9
9
Kenya, South Africa
20
9
Australia, Tonga, New Zealand, Fiji
Guam
S
9
U.K.
Spain
C
9
9
9
9
9
9
Egypt
9
9
Zambia, Tanzania
9
9
9
9
Installing the SD Memory Card
2
SD Memory Card
1
Getting Started
1
Card cover
This camera uses an SD Memory Card. Captured images are recorded
on the SD Memory Card if a card is inserted ( appears on the LCD
monitor) or in the built-in memory if no card is inserted (
appears on
the LCD monitor). Make sure that the camera is turned off before
inserting or removing the SD Memory Card.
1
Press down on the card cover release lever in the
direction indicated by the arrow.
Lift your finger, and the card cover opens.
2
3
Insert the SD Memory Card so the label is facing toward
the LCD monitor and push the card in until it clicks.
Close the card cover.
To remove the card, eject the card by pressing it in the direction
indicated by the arrow and pull it out.
The number of recordable images varies depending on the capacity of
the SD Memory Card or built-in memory and the selected image size and
quality. (1p.24)
Be sure to format unused cards or cards that have been used on another
camera. Refer to “Formatting an SD Memory Card or the Built-in
Memory” (p.116) for instructions on formatting.
21
Data Backup
1
Very occasionally, malfunction of the camera may cause data stored in the built-in
memory to become unreadable. As a backup measure, we recommend that you
download important data to a PC or store the data in a media other than the built-in
memory.
Getting Started
Precautions When Using an SD Memory Card
• Make sure that the camera is turned off before opening or closing the card
cover.
• The SD Memory Card is equipped with a write-protect switch.
Setting the switch to [LOCK] protects the existing data by
prohibiting recording of new data, deletion of existing data or
formatting of the card.
Write-protect switch
Y appears on the LCD monitor
when the card is write-protected.
• Care should be taken if you remove the SD Memory Card immediately after
using the camera, as the card may be hot.
• Do not remove the SD Memory Card or turn the camera off while data is being
recorded on the card, images or voice memos are being played back, or the
camera is connected to a PC with the USB cable as this may cause the data
to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away
from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage
the card and render it unusable.
• The data on the SD Memory Card may be deleted in the following
circumstances. PENTAX does not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical
interference.
(3) when the card has not been used for a long time.
(4) when the card is ejected, the AC adapter is disconnected or the batteries
are removed while the data on the card is being recorded or accessed.
• The SD Memory Card has a limited service life. If it is not used for a long time,
the data on the card may become unreadable. Be sure to make a backup of
important data on a PC.
• Avoid using or storing the card where it may be exposed to static electricity or
electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed
to rapid changes in temperature or to condensation.
• When using an SD Memory Card with a slow recording speed, recording may
stop while you are taking movies even when there is adequate space in the
memory, or shooting and playback may take a long time.
• For information on compatible memory cards, visit the PENTAX website or
contact your nearest PENTAX customer service center.
22
Recorded Pixels and Quality
Choose the appropriate number of recorded pixels and quality level on
the [A Rec. Mode] menu.
Selecting the Recorded Pixels 1p.68
Selecting the Quality Level 1p.69
1
Getting Started
Choose the number of recorded pixels and quality best suited to your
purpose.
Higher quality levels and numbers of recorded pixels produce clearer
images for printing, but the resulting increase in data volume reduces the
total number of pictures that can be taken.
Selecting the Image Quality 1p.70
Appropriate Number of Recorded Pixels According to Use
Higher quality
2560×1920
High quality photo printing, A4 size or larger prints, editing
or creating images etc.
2304×1728
2048×1536
1600×1200
1024×7680
Postcard size prints
Use on the Internet/e-mail, etc.
640×480
The default setting is 2560×1920.
Appropriate Quality According to Use
Lowest compression rate. Suitable for photo prints.
Standard compression rate. Suitable for viewing the image
D
Better
on a computer screen.
Highest compression rate. Suitable for attaching to e-mails
E
Good
or creating websites.
The default setting is D (Better).
C
Best
23
1
Getting Started
Superior
(5MB: 2560×1920 C)
Super
(5MB: 2560×1920 D)
Normal
(3MB: 2048×1536 D)
Economy
(0.3MB: 640×480 D)
The default setting is Super.
Higher quality
Appropriate Quality According to Use (Auto Select Mode)
High quality photo printing, A4 size or larger
prints, editing or creating images etc.
Postcard size prints
Use on the Internet/e-mail, etc.
The number of recorded pixels and quality are set together in - (Auto
Select) mode. (1p.70)
Approximate Number of Recordable Images by Size and Quality
When using the built-in memory (11MB)
Quality Level
Recorded Pixels
2560×1920
2304×1728
2048×1536
1600×1200
1024×7680
640×480
Movie
(320×240)
C
Best
D
Better
E
Good
3
6
10
4
8
12
5
9
14
49 sec. (15 fps)
8
15
21
25 sec. (30 fps)
19
36
48
44
69
92
Sound
11 min.
When using the SD memory card (128MB)
Quality Level
Recorded Pixels
2560×1920
2304×1728
2048×1536
1600×1200
1024×7680
640×480
C
Best
D
Better
E
Good
38
77
124
49
96
138
62
113
166
104
178
250
227
417
554
500
782
1043
Movie
(320×240)
Sound
9 min. 12 sec.
(15 fps)
2 h. 13 min.
4 min. 45 sec.
(30 fps)
• The above table is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions, capture
mode, SD Memory Card, etc.
24
Turning the Camera On and Off
Power switch
1
Getting Started
Q Playback button
1
Press the power switch.
The camera turns on.
The lens cover opens and the lens extends when the camera is turned
on.
2
Press the power switch again.
The camera turns off.
Switching between Capture Mode and Playback Mode
1p.44
Taking Pictures 1p.44
The “Battery depleted” error message may appear when you turn on the power after
purchasing the camera or after replacing the batteries if the batteries had been
removed for a long time. However, this is not an error. Wait a short period and then
turn the power switch on again, the power should come on normally. If this happens,
the date and time, recorded pixels and other settings may have been initialized, reset
the various settings according to the procedures in “Setting the Shooting Functions”
(p.65 to 81) and “Camera Settings” (p.116 to 129).
25
Power switch
Mode Dial
1
Getting Started
QPlayback button
Playback Only Mode
When the camera is turned on in the Playback Only mode, the lens does
not extend. Use this mode when you want to immediately play back
images or audio data without shooting pictures. The mode does not
switch to Capture mode even if the shutter release button is pressed.
1
Press the power switch while pressing the Q Playback
button.
The camera turns on in the Playback Only mode. The lens does not extend.
• To switch from Playback Only mode to Capture mode, press the power
switch to turn the camera off, then press it again to turn it on.
• In the Playback Only mode, Q is displayed when playing back images.
• In the Capture mode, pressing and holding the Playback button for two
seconds or more switches the mode to the Playback mode, and the
lens is retracted. The Playback mode is different from the Playback
Only mode, pressing the Playback or shutter release buttons again, or
turning the mode dial switches the mode to the Capture mode.
ONLY
Playing Back Still Pictures 1p.90
Voice Recording Only Mode
Voice Recording Only mode is for recording sound only. The lens does
not extend in this mode.
You can use the camera as a voice recorder.
1
Set the mode dial to O and press the power switch.
The camera turns on in Voice Recording Only mode. The lens does not extend.
When the mode dial is turned in Voice Recording Only mode, the lens
extends and the camera switches to capture status.
Recording Sound (Voice Recording Mode) 1p.84
26
Initial Setting
After purchasing the camera, before using it for the first time set the
language, date and time.
1
Getting Started
Power switch
Four-way controller
OK button
MENU button
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are
displayed from the following: English, French, German, Spanish, Italian,
Russian, Korean, Chinese (traditional and simplified) and Japanese.
1
2
Turn the camera on.
Use the four-way controller (45)
to choose the display language.
Initial Setting
English
NYC
City
DST
The default setting is English.
3
Press four-way controller (3).
MENU
Exit
OK
OK
The frame moves to [City].
4
5
Use four-way controller (45) to choose the desired city.
Press four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
6
Use four-way controller (45) to select O (On) or
P (Off).
7
Press the OK button.
The Date Adjust screen appears (see next page). Continue with the
date settings.
27
If you have set the wrong language by mistake, use the following
procedure to reset the language.
1
1
2
Getting Started
3
4
5
Press the MENU button twice.
Press the four-way controller (5)
twice.
Press the four-way controller (23)
to choose the [Language/
].
Use the four-way controller (45) to
choose the display language.
Press the OK button.
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
Exit
OK
OK
The language is reset, and the screen switches to the Caputure mode.
The date and time settings are not finished yet, set them following the
procedure on (p.118) “Changing the Date and Time”.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller (23),
to select the date display style.
Date Adjust
m m / d d / y y 24H
Date Style
01 / 01 / 2005
00 : 00
2
MENU
Press the four-way controller (5).
The frame moves to [24H].
3
4
Exit
Press the four-way controller (5).
The frame moves to month.
OK
Date Adjust
m m / d d / y y 24H
Date Style
Press the four-way controller (23),
to select the time display style.
Select [12H] to display the time in a 12 hour
format, or select [24] to display the time in a
24 hour format.
OK
01 / 01 / 2005
00 : 00
MENU
Exit
OK
OK
Date Adjust
Date Style
m m / d d / y y 12H
01 / 01 / 2005
AM 12 : 00
MENU
28
Exit
OK
OK
5
Set the day and year in the same manner. (Pressing the four-way
controller (4) moves the frame to the previous item.)
If you select [12H] in step 3, the setting switches between AM and PM
corresponding to the time.
Press the OK button.
The camera is ready to take pictures.
• When you finish the settings and press the OK button, the camera
clock is reset to 00 seconds.
• To set the exact time, press the OK button when the time signal
(on the TV, radio, etc.) reaches 00 seconds.
1
Getting Started
6
Press the four-way controller (23) to change the month.
The initial setting is completed. The Initial Setting screen will not appear when you use
the camera next time.
• When the Initial Setting or Date Adjust screen is displayed, you can
cancel the setting operation and switch to Capture mode by pressing
the MENU button. In this case, the Initial Setting or Date Adjust screen
will appear next time you turn the camera on.
• You can change the settings after they have been made. Refer to the
following pages for operation procedures.
[Language]: “Changing the Display Language” (p.124)
[City] [DST]: “Setting the World Time” (p.120)
[Time]: “Changing the Date and Time” (p.118)
• [Video Output Format] is automatically set corresponding to the
display language setting as shown in the table below. If the format of
your region is different, reset the setting following the instruction
“Changing the Video Output Format” (p.125).
Language
Japanese
English
French (Français)
German (Deutsch)
Spanish (Español)
Italian (Italiano)
Traditional Chinese (
Simplified Chinese (
Russian (
)
Korean (
)
)
)
Video Output
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
29
Quick Start
Taking Still Pictures
Shutter release button
Power switch
2
Mode Dial
Quick Start
DISPLAY button
i Delete button
Zoom/f/y button
LCD monitor
The standard procedure for taking still pictures is described below. The
flash fires automatically depending on the light conditions.
1
Press the power switch.
4
The camera turns on.
2
3
Set the mode dial to R.
Check the image on the LCD monitor.
The focus frame in the middle of the LCD
monitor indicates the zone of automatic
focusing. You can change the captured area
by pressing the Zoom/w/x button.
x : enlarges the subject.
w: enlarges the area captured by the camera.
06/10/2005
10:25
Focus frame
Be sure to check the focusing area on the LCD monitor.
4
Press the shutter release button halfway.
The focus frame turns green if the subject is in focus.
5
Press the shutter release button fully.
The image appears on the LCD monitor for 0.5 second (Instant
Review) and is recorded on the SD Memory Card or in the built-in
memory. The green and red lamps on the upper part of the back of the
camera blink alternately while the image is being recorded.
30
Using the Shutter Release Button
Lit
Blinks
Focus status lamp (green)
Subject is in focus
Subject is out of focus
2
Quick Start
The shutter release button works in a two-step action as follows.
Press halfway
The focus and exposure are locked when the shutter release button is
pressed lightly (halfway). The shutter speed and aperture settings only
appear on the LCD monitor when the shutter release button is pressed
halfway. The following information is indicated on the LCD monitor and
by the focus status and flash status lamps when the shutter release
button is pressed halfway.
1. Focus frame
The focus frame lights green at the focus position if the subject is in
focus. The frame does not appear if the subject is out of focus.
2. Status lamps
Flash status lamp (red)
Flash is charged
Flash is charging
Pictures cannot be taken while the flash is charging.
Press down fully
Press the shutter release button all the way down (fully) to take a picture.
[Poor focusing conditions]
The camera may not be able to focus under the following conditions. In
this case, lock the focus on an object the same distance away as the
subject (by pressing the shutter release button halfway), then aim the
camera at your subject and press the shutter release button fully.
•
•
•
•
•
Objects that lack contrast such as a blue sky or white wall
Dark places or objects, or conditions that prevent light being reflected back
Horizontal lines or intricate patterns
Fast moving objects
When there is an object in the foreground and an object in the background
in the same picture
• Strongly reflected light or strong backlighting (bright background)
Instant Review
The Instant Review default setting is 0.5 second. When the display time
is set to one second or longer, you can delete the image by pressing the
i Delete button in the instant review display, selecting [Delete] when the
[Delete] menu appears and pressing the OK button. (1p.96)
Setting the Instant Review Time 1p.77
31
Quick Start
Playing Back Still Pictures
i Delete button
2
Q Playback button
Quick Start
LCD monitor
Four-way controller
Playing Back Images
You can display the still picture you have just taken.
1
Press the Q Playback button
after taking a picture.
100-0004
The mode changes to the Playback mode
and the image appears on the LCD monitor.
Pressing and holding the Playback button
06/10/2005
10:25
for two seconds or more switches the mode
to the Playback mode, and the lens is
retracted. After viewing the image, press the Playback or shutter
release button again or turning the mode dial to take another picture.
Playing Back the Previous or Next Image
Still pictures can be played back one at a time, proceeding either forward
or backward.
1
2
Press the Q Playback button after taking a picture.
The image appears on the LCD monitor.
Press the four-way controller (45).
displays the previous image.
displays the next image.
32
Rotating the Displayed Image
1
Press the Q Playback button after taking a picture.
The image appears on the LCD monitor.
2
Press the four-way controller (3).
100-0004
06/10/2005
10:25
2
Quick Start
The image is rotated 90° clockwise
each time the button is pressed.
• Only still images taken with this camera can be rotated.
• Zoom display, nine-image display and voice memo recording/playing
function can be used with rotated images. However, images rotated in
zoom playback are returned to their normal orientation.
Deleting the Displayed Image
You can delete the image displayed on the LCD
monitor by pressing the i Delete button, using
the four-way controller (2) to select [Delete] and
pressing the OK button.
Press the Q Playback button again or press the
shutter release button halfway to return to the
Capture mode.
Delete
Cancel
All
MENU E x i t
OK
OK
• The last picture taken appears on the LCD monitor when you switch to
the Playback mode.
• You can enlarge the image by pressing the Zoom /f/y button.
• If there are no images stored, the [No image/sound] message
appears.
Deleting 1p.96
33
Common Operations
Using the Button Functions
1
2
3
4
5
6
3
Common Operations
7
Capture Mode
1
DISPLAY button
Changes the information displayed on the LCD monitor. (1p.45)
2
Q Playback button
Switches to the Playback mode. Press it and hold it down to retract the lens.
(1p.32)
3
Zoom button
You can change the shooting area by pressing the Zoom button. (1p.56)
4
0 button
Displays the Help screen in - mode. (1p.48)
Sets the function assigned by [Fn Setting] on the [BSet-up] menu in any
mode other than -, C or O mode. (1p.128)
5
Four-way controller
[Used for all modes]
(4)
Changes the flash mode (except for Movie mode). (1p.67)
(5)
Changes the focus mode. (1p.65)
(2)
Selects self-timer mode, remote control mode and continuous
shooting mode (1p.58 - p.60)
[When using PICT, digital filter mode]
(3)
Selects the shooting effect. (1p.50, 61 - 63)
[When using MF mode]
(23) Adjusts the focus. (1p.66)
6
OK button
Sets a menu item. (1p.37)
7
MENU button
Displays the [A Rec. Mode], [Q Playback] and [B Set-up] menus.
(1p.37)
34
2
1
3
4
5
6
7
8
Playback Mode
3
DISPLAY button
Common Operations
1
Changes the information displayed on the LCD monitor. (1p.93)
Selects all images for printing or protecting on the DPOF screen and
Protect screen. (1p.100, p.105)
2
i Delete button
3
Q Playback button
4
Zoom/f/y button
5
0 button
6
Four-way controller
7
OK button
Deletes the image displayed on the LCD monitor. (1p.96)
Switches to the Capture mode. (1p.32)
Press f during normal playback to change the display to nine images.
Press y during normal playback to change to a magnified display. (1p.94)
Press Zoom/f/y during zoom playback to change the size of the
Zoom Display image displayed on the LCD monitor.
Displays the Help screen in - mode.
(2)
Plays back and pauses a movie. (1p.92)
Starts playback of a voice memo. (1p.88)
(45) Displays the previous or next image. (1p.32)
(3) Rotates the image when pressed in still image playback. (1p.33)
Stops playback during playing back movies or voice memos.
(1p.88, 92)
Sets a menu item. (1p.37)
Starts recording or playing back a voice memo.
8
MENU button
Displays the [A Rec. Mode], [Q Playback] and [B Set-up] menus. (1p.37)
Pressing the Q Playback button does not change the mode to the
Capture mode when the camera was turned on in Playback Only mode.
To switch from Playback Only mode to Capture mode, press the power
switch to turn the camera off, then press it again to turn it on.
35
5
1
2
3
4
3
Common Operations
Voice Recording Mode
1
Shutter release button
2
Q Playback button
When pressed, starts recording, and when pressed again, stops
recording. (1p.84)
Switches to the Playback mode. When pressed again, returns to Voice
Recording mode. (1p.85)
3
Four-way controller (in Playback mode)
(2) Starts playback. When pressed again, pauses playback. (1p.85)
(45) Selects previous and next image and sound file before playback.
(3) Stops playback.
4
MENU button
5
DISPLAY button
When pressed during standby or before playback, displays the
[Q Playback], [B Set-up] menus. (1p.42)
When recording sound:
The LCD monitor turns off. When pressed
again, returns to the recording screen.
When playing back sound: When pressed during standby, the display
mode changes to the No Icons. When
pressed again, returns to the Normal
Display.
36
Using the Menus
When you press the MENU button, the menus appear on the LCD
monitor. You can set functions, save the settings and change the camera
settings on these menus.
How to Use the Menus
When you are making settings from a menu, a guide to operation
appears on the LCD monitor.
Ex.) To set the [Quality Level] on the [A Rec. Mode] menu
Press the MENU button.
The menu screen appears. The
[A Rec. Mode] menu is selected.
2
3
Press the four-way controller (3).
The frame moves to [Recorded Pixels].
Press the four-way controller (3).
The frame moves to [Quality Level].
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
5
Use the four-way controller (45)
to change the setting.
The quality changes each time the four-way
controller is pressed.
Press the OK button or the shutter
release button.
Exit
2560
AWB
Multi
Auto
OK
OK
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
4
3
Exit
2560
Common Operations
1
AWB
Multi
Auto
OK
OK
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
The setting is saved and the screen returns
to capture status.
• If you press any buttons before pressing the OK button or the shutter
release button to exit the menu, any changes you have made to the
settings will not be saved.
• Even after pressing the OK button or the shutter release button to exit
the menu, if you turn the camera off incorrectly (such as by removing
the batteries while the camera is turned on), any changes you have
made to the settings will not be saved.
37
Example of Menu Operation
[A Rec. Mode] Menu
Rec. Mode
MENU
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
3
Exit
2560
AWB
Multi
Auto
OK
OK
MENU button
Common Operations
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
Exit
2560
AWB
Multi
Auto
OK
OK
Rec. Mode
2560
AWB
Multi
400
OK
OK
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
To the next screen
38
[Q Playback] Menu
[B Set-up] Menu
Set-up
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
OK
OK
MENU
Exit
OK
OK
3
MENU
Exit
3sec
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
OK
OK
To the next screen
MENU
Exit
OK
OK
Common Operations
Set-up
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
To the next screen
The [A Rec. Mode] menu appears when you press the MENU button in
Capture mode, and the [Q Playback] menu appears when you press
the MENU button in Playback mode.
39
Enlarging a Menu Display
Pressing the zoom button (x) while a menu is displayed enlarges the
menu. Press w to return to the original display.
Example of Menu Operation
Rec. Mode
3
Common Operations
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
MENU
Exit
Auto
OK
MENU
Exit
Quality Level
w
OK
2560
MENU
x
Auto
OK
w
Auto
OK
OK
AWB
MENU
x
Exit
OK
OK
Rec. Mode
Focusing Area
AWB
Multi
OK
OK
White Balance
OK
2560
Exit
Rec. Mode
AWB
Multi
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Rec. Mode
AWB
Multi
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
x
w
Multi
MENU
Exit
OK
OK
If you turn the camera off while still in enlarged display mode, the next
time you turn the camera on and press the MENU button, the menu will
be enlarged.
40
Menu List
[A Rec. Mode] Menu
Yes ... Adjustable
# ... Any changes made are invalid in d, H and = modes.
No ... Any changes made are invalid. You can change the setting on the
menu, but any changes you make are invalid in actual operation.
Description
For selecting the
Image Quality number of pixels and
image compression rate
Recorded
For selecting the
Pixels
number of pixels
For selecting the image
Quality Level compression rate
For adjusting the color
White
balance according to
Balance
lighting
Focusing
Area
For changing the area of
the autofocus
Default
Setting
-
Rd=
H.+
C
Page
Super
Yes
—
—
p.70
3
2560×1920
—
Yes
320×240
p.68
D
—
Yes
No
p.69
AWB
(Auto)
—
#
Yes
p.71
Multi
(Multiple)
—
Yes
No
p.73
—
Yes
Yes
p.74
Common Operations
Item
—
Yes
No
p.75
—
No
Yes
p.76
—
Yes
Yes
p.56
—
Yes
No
p.77
—
Yes
Yes
p.82
—
#
No
p.78
—
#
No
p.79
—
#
No
p.80
—
Yes
Yes
p.81
For setting the metering
L
method to determine the
(Multi-segment)
exposure
For setting the
Sensitivity
Auto
sensitivity
For setting the frame
Frame Rate
30 fps
rate
For taking digital zoom
Digital Zoom pictures
On
Instant
For setting the Instant
0.5 sec
Review
Review time
For saving the shooting
Memory
function settings when
∗
the camera is turned off
For setting the
Sharpness
Normal
sharpness
For
setting
the
Saturation
Normal
saturation
Contrast
For setting the contrast
Normal
For adjusting the
EV
exposure between –2.0
±0.0
Compensation
and +2.0
AE Metering
∗ Only the flash, digital zoom and file number settings are saved.
• There is no [A Rec. Mode] menu in O mode.
• [Image Quality] is the only menu available in - mode.
41
[Q Playback] Menu
Item
3
Page
For protecting images from deletion
p.99
DPOF
For setting the printing service to print out images
p.108
Slideshow
For playing back recorded images successively
p.95
Resize
For changing the size of images
p.110
Image/Sound Copy
For copying files from the built-in memory to the SD
Memory Card and vice versa
p.114
Digital Filter
For creating a filter effect using filters (red, blue, green, etc.)
p.112
preventing the voice memo from being recorded while
Record Voice Memo For
playing back still images, when OFF is selected
p.86
Common Operations
Quick Zoom
For playing back images at the maximum zoom size by
pressing the Zoom button only once
p.91
Quick Delete
For displaying the Delete screen with [Delete] highlighted
when ON is selected
p.97
[B Set-up] Menu
Item
Description
Page
Format
For formatting the SD Memory Card or built-in memory
p.116
Sound
For adjusting the playback volume and setting the type and
volume of start-up sound, shutter sound, key operation
sound.
p.117
Date Adjust
For adjusting the date, time and date style
p.118
World Time
For setting the world time
p.120
Language/
For changing the language in which menus and messages
appear
p.124
Screen Setting
For selecting the start-up screen, background color and
screen effects
p.122
Brightness Level
For changing the brightness of the LCD monitor
p.124
Video Out
For setting the video output format
p.125
USB Connection
For changing the USB connection mode
p.126
Auto Power Off
For turning off the power automatically after a fixed time
p.127
Fn Setting
For registering a function on the four-way controller
(2345)
p.128
Reset
For returning the camera settings to defaults
p.127
∗
∗
42
Description
Protect
The “Fn setting” is not available in the - mode.
Memo
3
Common Operations
43
Taking Pictures
Taking Pictures
Changing the Mode
Capture mode is for taking pictures and Playback mode is for playing
back or deleting images.
Switching between Capture Mode and Playback Mode
4
• To change from Capture mode to Playback mode, press the
Q Playback button.
• To change from Playback mode to Capture mode, press the
Q Playback button or press the shutter release button halfway.
Taking Pictures
In Capture mode, pressing and holding the Q Playback button for two
seconds or more switches the mode to the Playback mode, and the lens
is retracted.
Selecting the Capture Mode
Capture Modes
1
R
Program mode
d
Picture mode
-
Auto Select mode
=
H
.
C
Portrait mode
Landscape mode
Night-Scene mode
Movie mode
+
Digital Effect mode
p.49
The basic picture-taking mode.
You can select the Picture mode according to
p.50
the shooting scene.There are nine Picture
modes to choose from.
Lets the camera set the functions
p.47
automatically.
p.53
Lets you take portrait-type pictures.
p.53
Lets you take landscape views.
Lets you take dark scenes such as night views. p.52
p.54
Lets you take movies.
Lets you take pictures with a variety of special p.61 64
effects.
Turn the mode dial and match the
indicator with one of the following:
Rd-=.HC+.
Indicator
44
Displaying Shooting Information in Capture Mode
The LCD monitor display changes each time you press the DISPLAY button.
Normal Display
1 2 3 4 5 6 7
Shooting information is displayed when the
power is turned on.
11
1 Flash mode
2 Drive mode
3 Focus mode
4 Capture mode
5 Focus frame
6 Card/Built-in memory
06/10/2005
10:25
7 Remaining number of recordable images
8 Date and time
9
8
9 Battery level indicator
2 3
1
11
2304
AWB
AUTO
6
5
Grid Display
A grid appears to help you compose your
pictures.
4
4
Taking Pictures
Histogram Display
The brightness distribution of the image is
displayed. The horizontal axis of the histogram
shows the brightness (darkest at the left end and
brightest at the right end) and the vertical axis
shows the number of pixels.
1 White balance
2 Recorded pixels
3 Quality level
4 Sensitivity
5 Histogram
6 AE metering
No Icons
No shooting information is displayed.
• The focus frame appears in Autofocus mode.
• If any of the modes are changed, such as the
flash mode, the mode you have changed
appears for a few seconds.
LCD Monitor Off
The LCD monitor turns off.
The LCD monitor cannot be turned off in C or +
mode.
LCD Monitor Off
Normal Display
Saving the Display Mode 1p.82
45
Using Histogram
Number of pixels
A histogram is a graph showing the
brightness of an image on the
horizontal axis and the number of
pixels on the vertical axis (distribution
chart of the brightness). The histogram
will help you detect the brightness of
the image you have taken. For
instance, the graph peak tends to
Brightness
appear on the left side for a darker
(Dark)
(Bright)
image, and the graph peak tends to
appear on the right side for a brighter
image. In general, when the exposure meter of your image is wellbalanced, the graph peaks tend to appear in the middle. On the contrary,
when the exposure meter gets imbalanced tending dark and bright
without showing a neutral brightness, the peaks appear not in the middle
but on both sides.
4
Taking Pictures
46
Dark
Neutral
Bright
1
2, 3
Letting the Camera Set the Functions (Auto Select Mode)
1
2
Set the mode dial to -.
Press the shutter release button
halfway.
4
The focus frame on the LCD monitor
changes to green if the subject is in focus, the
settings are selected for the shooting scene
06/10/2005
10:25
automatically recognized by the camera, and
one of the following icons appears.
H : The camera chooses the optimal settings for a landscape view.
= : The camera chooses the optimal settings for a portrait shot.
. : The camera chooses the optimal settings for a night view.
- : This icon appears in all other situations.
3
4
Taking Pictures
- (Auto Select) mode is the simplest way to take pictures without having
to set any functions. The camera automatically chooses the optimal
settings for the shooting scene when the shutter release button is
pressed halfway.
Press the shutter release button down fully.
The picture is taken.
• [Image Quality] is the only item that can be changed on the
[A Rec. Mode] menu in Auto Select Mode.
• You are recommended to set the mode dial to . and secure the
camera on a tripod etc. when taking night views. If the camera
recognizes the scene as the . in the Auto Select Mode, pictures of
night views may be dark because the shutter speed is controlled in a
range to prevent camera shake.
47
1
2
3, 4
5, 6
Using the Help Function
4
Taking Pictures
You can display the Help screen while taking or viewing pictures in Auto
Select mode. The Help screen describes the function of each button,
such as the four-way controller keys and zoom button.
1
2
Set the mode dial to -.
Press the 0 button.
The Help screen appears on the LCD
monitor.
Mode Dial
Auto Select
Exit
?/Fn
3
4
5
6
Use the four-way controller (45)
to select [Mode Dial], [Four-way
Controller] or [Buttons on Back
Cover].
Only [Four-way Controller] and [Buttons on
Back Cover] are available in Playback mode.
More
Four-way Controller
Right
Up
Left
OK Button
Down
?/Fn
Exit
OK
More
Use the four-way controller (23)
to choose the button or mode that you want to be
explained.
Press the OK button.
The explanation of the button appears.
Press the OK button.
This button changes
the Focus mode.
AF Macro Super macro
infinity Manual focus
The camera is ready to take or play back
pictures.
?/Fn
48
OK
Exit
OK
OK
1
3, 4
Setting the Functions (Program Mode)
1
2
Set the mode dial to R.
Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.65 to p.81) for details of how to set the
functions.
3
Press the shutter release button
halfway.
4
4
Taking Pictures
In R (Program) mode, the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode or continuous shooting mode.
06/10/2005
10:25
The focus frame turns green if the subject is in focus.
4
Press the shutter release button fully.
The picture is taken.
Taking Still Pictures 1p.30
49
1
5, 6
2, 3
4
Selecting the Picture Mode According to the
Shooting Scene (Picture Mode)
4
Taking Pictures
You can select the Picture mode according to the shooting scene.
There are 9 available modes in Picture mode.
Flower (default setting) Lets you take brightly colored flower pictures.
Self-portrait
Surf
;
Snow
Sunset
Museum
1
2
Lets you take pictures of yourself or be included in
pictures.
Lets you take photos against dazzling backgrounds
such as beaches.
Lets you take photos against dazzling backgrounds
such as snow-covered mountains.
Lets you reproduce the beautiful colors of the sunrise
or sunset.
Lets you take pictures in art galleries and museums
where flash photography is prohibited.
W
Text
Lets you take clear pictures of text or writing.
D
Food
Lets you take appetizing pictures of prepared food.
Landscape Portrait
Lets you take pictures where both the person in the
foreground and the scenery in the background are in
focus.
Set the mode dial to d.
Press the four-way controller (3).
The screen for choosing a Picture mode appears.
50
3
Use the four-way controller
(2345) to choose the Picture
mode.
Flower
4
OK
Press the OK button.
The Picture mode is selected.
5
8
Press the shutter release button
halfway.
The focus frame turns green if the subject is
in focus.
6
OK
06/10/2005
10:25
Press the shutter release button fully.
In Picture mode, the saturation, contrast, sharpness and white balance
are automatically set to the optimal settings for each mode. (The setting
values can be changed, but they are not reflected in the operation.)
4
Taking Pictures
The picture is taken.
51
1
2, 3
Taking Pictures of Dark Scenes
(Night-Scene Mode)
4
Taking Pictures
You can take pictures of dark scenes, such as nightscapes, with the
appropriate settings.
The shutter speed is slower when taking pictures of dark scenes. To
prevent camera shake, secure the camera on a tripod or other surface.
1
2
Set the mode dial to ..
The focus frame turns green if the subject is
in focus.
3
17
Press the shutter release button
halfway.
06/10/2005
10:25
Press the shutter release button
fully.
The picture is taken.
Using the Shutter Release Button 1p.31
• Total recording time will be longer when the picture is taken at slower
shutter speed, because the noise reduction activates to reduce noise.
• In the Night Scene Mode, the auto sensitivity has a range of 50 to 200.
52
1
2, 3
Taking Landscape Views (Landscape Mode)
This mode lets you take landscape views using the optimal settings.
3
4
Set the mode dial to H.
Press the shutter release button
halfway.
The focus frame turns green if the subject is
in focus.
Press the shutter release button
fully.
4
06/10/2005
10:25
Taking Pictures
1
2
The picture is taken.
Using the Shutter Release Button 1p.31
Taking Portrait Pictures (Portrait Mode)
This mode lets you capture your subject in natural colors using the
optimal settings.
1
2
3
Set the mode dial to =.
Press the shutter release button
halfway.
The focus frame turns green if the subject is
in focus.
Press the shutter release button
fully.
9
06/10/2005
10:25
The picture is taken.
Using the Shutter Release Button 1p.31
53
1
2, 3
Taking Movies (Movie Mode)
4
This mode lets you take movies. Sound can be recorded at the same
time.
Taking Pictures
1
Set the mode dial to C.
The following information appears on the
LCD monitor.
1 Flash Off icon
2 Movie mode icon
3 Card/Built-in memory
4 Recordable time
2
Press the shutter release button.
1
2
3 4
00:01:23
06/10/2005
10:25
Recording starts. The flash status lamp
flashes during recording.
You can change the captured area, with the digital zoom, by pressing
the Zoom/w/x button.
x : enlarges the subject.
w: enlarges the area captured by the camera.
54
3
Press the shutter release button.
Recording stops and the flash status lamp goes off.
•
•
•
•
•
The flash will not discharge in Movie mode.
Continuous shooting is not possible in Movie mode.
The LCD monitor cannot be turned off in Movie mode.
The focus is fixed while recording in Movie mode.
You cannot use the optical zoom while recording in Movie mode. You
should compose the picture on the LCD monitor when you use the
digital zoom function.
Playing Back Movies 1p.92
Disabling the Digital Zoom Function 1p.57
4
Recording starts when you keep the shutter release button pressed for
more than one second. The movie will be taken for as long as you keep
the button pressed. Recording stops when you take your finger off the
shutter release button.
Taking Pictures
Keeping the Shutter Release Button Pressed
55
1
-dR+C.H=
Using the Zoom
You can use the zoom to change the shooting area.
4
Taking Pictures
1
Press the Zoom/w/x button in
Capture mode.
4
x (Tele) : enlarges the subject.
w (Wide) : enlarges the area captured by
the camera.
The digital zoom function is turned on in
initial settings. When the digital zoom
function is enabled, you can combine the
digital zoom with the optical zoom to give a
maximum zoom magnification equivalent to
eight times.
When you turn off the digital zoom in the
“A Rec. Mode” Menu, you can only take
pictures at three times magnification with
the optical zoom.
Digital zoom range
When digital zoom is enabled
4
Zoom bar
When digital zoom is disabled
Saving the Zoom Position 1p.82
You cannot use the optical zoom in Movie mode.
56
Disabling the Digital Zoom Function
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Digital Zoom].
3
Use the four-way controller (45)
to select P(Off).
4
Press the OK button.
Rec. Mode
Frame Rate
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
MENU E x i t
30fps
0.5sec
OK
OK
The camera is ready to take pictures.
The digital zoom is disabled when you turn the LCD monitor off, even if
the digital zoom function is set to On.
Saving the Digital Zoom Function Setting 1p.82
Taking Pictures
• You should compose the picture on the LCD monitor when you use the
digital zoom function.
• The default setting for the digital zoom is O (On).
4
57
2, 3
1
-dR+C.H=
Using the Self-Timer
1
Press the four-way controller (2) in Capture mode to
display g or r on the LCD monitor.
2
Press the shutter release button halfway.
4
Taking Pictures
The focus frame turns green if the subject is in focus.
3
Press the shutter release button
fully.
4
g The self-timer is engaged and the selftimer lamp lights for about seven
seconds. The picture is taken
06/10/2005
10:25
approximately three seconds after the
self-timer lamp starts to blink.
r The self-timer is engaged and the picture is taken approximately
two seconds after the self-timer lamp starts to blink.
Focusing position may shift if you move the camera while the self-timer
lamp is blinking.
• The second count appears if you turn the LCD monitor on.
• To cancel the self-timer, press any button, such as the MENU button,
while the second count is displayed.
Taking Pictures of Yourself 1p.50
Troubleshooting: “Subject is not in focus” 1p.135
58
2, 3
1
-dR+.H=
Continuous Shooting
(Continuous Shooting Mode)
Pictures are taken continuously while the shutter release button is pressed.
Press the four-way controller (2)
in Capture mode to display j on
the LCD monitor.
4
06/10/2005
10:25
2
Taking Pictures
1
4
Press the shutter release button halfway.
The focus frame turns green if the subject is in focus.
3
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is
pressed.
Shooting stops when you take your finger off the shutter release
button.
• You can continue shooting until the built-in memory or the SD Memory
Card is full.
• The interval will vary according to the Recorded Pixels and Quality
Level settings.
• The flash will not discharge in Continuous Shooting mode.
• Continuous shooting is not possible in Movie mode, Panorama Assist
or Two-in One.
• The focus, exposure and white balance are locked with the first image.
59
3
2
1
Remote control unit E
(Remote control unit F has no zoom button.)
-dR+C.H=
Using the Remote Control Unit (optional)
4
Taking Pictures
You can switch the Drive mode to Remote Control mode and take
pictures using the remote control unit for Pentax cameras (optional).
The remote control receiver is on the front of the camera. Operate the
remote control unit toward the camera lens.
1
2
3
Press the four-way controller (2)
in Capture mode to displayh on
the LCD monitor.
The self-timer lamp blinks slowly and the
camera is ready to take the picture.
Press the zoom button to adjust the
zoom (for remote control unit E).
4
06/10/2005
10:25
The zoom position changes each time the zoom button is pressed in
the following sequence: tele middle wide
Press the shutter release button on the remote control
unit.
hThe picture is taken immediately.
iThe self-timer lamp blinks rapidly and the picture is taken after
approximately three seconds.
• Focusing position may shift if you move the camera while the self-timer
lamp is blinking.
• When the Focus mode is set to Super Macro mode, the zoom
magnification does not change.
• The buttons on the camera can be used in the normal way.
• Ensure that the remote control unit is no more than four meters away
from the front of the camera.
60
Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera approximately
30,000 times. Contact your nearest PENTAX customer service center if the
battery needs changing. (A charge is made for changing the battery.)
1
5, 6
2, 3
4
+
You can take pictures with digital filters in a variety of colors, such as red,
blue and green.
1
2
Set the mode dial to +.
Taking Pictures
Taking Pictures with Color Filters
(Digital Filter Mode)
4
Press the four-way controller (3).
The screen for choosing a digital effect
mode appears.
3
Use the four-way controller
(2345) to choose a color filter.
Filter
B&W
OK
OK
You can choose from eight color filters: blackand-white, sepia, red, green, blue, black-andwhite + red, black-and-white + green, and black-and-white + blue. You
can check the filter effect on the LCD monitor when you choose a color.
4
5
Press the OK button.
Press the shutter release button halfway.
The focus frame turns green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
61
1
5, 6
2, 3
4
+
Taking Two-in-One Pictures (Two-in-One Mode)
4
Taking Pictures
You can take two images in succession and place them side by side to
form a single picture. The first image is positioned in the left half of the
picture and the second image in the right half.
1
2
3
4
Set the mode dial to +.
Press the four-way controller (3).
The screen for choosing a digital effect mode appears.
Use the four-way controller (23
45) to select == (Two-in-One).
Press the OK button.
The screen for taking the first image
appears.
5
6
OK
OK
Take the first image.
4
Make sure that the subject is positioned in
the left half of the screen and press the
shutter release button.
When you have taken the first image, it
appears semi-transparent in the left half of
the picture.
Shoot
1st half
06/10/2005
10:25
Take the second image.
Make sure that the subject is positioned in
the right half of the screen and press the
shutter release button.
When you have taken the second image,
the two images are combined to form one
picture and the screen returns to Step 5.
To cancel Two-in-One mode, change to
another mode.
62
Two-in-One
Shoot area by
halves & join
4
Shoot
2nd half
06/10/2005
10:25
1
6, 7
2, 3, 5
4, 8
+
Taking Panorama Pictures (Panorama Assist Mode)
1
2
Set the mode dial to +.
Press the four-way controller (3).
4
Taking Pictures
You can take a number of images and join them together to form a
panorama picture. The software (ACDSee for PENTAX) on the CD-ROM
(S-SW32) provided with the camera and a computer are necessary for
joining the images. The Panorama Assist mode enables you to overlap
the edges of the images so that they are easier to join together into a
panorama picture.
The screen for choosing a digital effect mode appears.
3
Use the four-way controller
(2345) to select F (Panorama
Assist).
Panorama Assist
4
5
OK
OK
Press the OK button.
Use the four-way controller to
choose the direction in which the
images will be joined.
Set shift
direction
4 Joins the images at the left.
5 Joins the images at the right.
2 Joins the images at the top.
3 Joins the images at the bottom.
The example shows the images when 5 is selected.
63
6
Take the first image.
11
Press the shutter release button to take the
first image. The right edge of the image
appears in semi-transparent form on the left
of the LCD monitor.
OK
7
4
Taking Pictures
64
Move the camera to the right and
take the second image.
Move the camera until the semi-transparent
image and the actual view overlap and
press the shutter release button. Repeat
Steps 6 and 7 to take the third and
subsequent images.
8
10
OK
Press the OK button.
The screen returns to Step 5.
To cancel Panorama Assist mode, change to another mode.
• The camera cannot join the images. Use the ACD Photostitcher
function provided in the ACDSee for PENTAX software. Refer to
“Photosticher Function” (p.23) in the “ACDSee for PENTAX User
Guide” for instructions on creating panorama pictures.
• Continuous shooting is not possible in Panorama Assist.
Setting the Shooting Functions
1
-dR+C.H=
Selecting the Focus Mode
(No
icon)
Autofocus mode
The camera focuses on the object in the autofocus area
when the shutter release button is pressed halfway.
Use this mode when the distance to the subject is more
than 40 cm (16 in.).
This mode is used when the distance to the subject is
approx. 18 cm - 50 cm (7 in. - 20 in.). The camera
focuses on the object in the autofocus area when the
shutter release button is pressed halfway.
This mode is used when the distance to the subject is
approx. 6 cm - 20 cm (2.4 in. - 8 in.). The camera
focuses on the object in the autofocus area when the
shutter release button is pressed halfway.
q
Macro mode
r
Super Macro mode
s
Infinity-Landscape
mode
z
Manual Focus mode Adjust the focus manually with the four-way controller.
1
Taking Pictures
Focus mode
4
This mode is used for taking distant objects.
Press the four-way controller (5) in Capture mode.
The focus mode changes each time the button is pressed and the icon
appears on the LCD monitor.
The camera is ready to take pictures in the selected focus mode.
• The default setting is Autofocus mode.
• The zoom is fixed at the middle position and only the digital zoom can
be used in Super Macro mode.
Be sure to check the image on the LCD monitor when the focus mode is
set to Macro mode or Super Macro mode.
65
Manual Focus
When the mode is set to z (Manual Focus), the central portion of the
picture is enlarged to full screen on the LCD monitor for focus
adjustment. Pressing the four-way controller (23) displays the indicator
on the LCD monitor. Use the indicator as a guide while adjusting the
focus with the four-way controller (23).
4
For distant focus
For closer focus
4
3m
1
0.3
.18
06/10/2005
10:25
Taking Pictures
Indicator
After the focus is set, press any button except the four-way controller
(23) or take your finger off the four-way controller (23). The screen
returns to the normal display about two seconds later.
When focusing, hold down the four-way controller (23) to focus
quickly.
Saving the Focus Mode 1p.82
66
1
-dR+.H=
Selecting the Flash Mode
Flash Modes
a
Flash Off
b
Flash On
c
Auto + Red-eye
reduction
d
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes caused
by the light from the flash being reflected in the subject’s
eyes. The flash discharges automatically.
This mode reduces the phenomenon of red eyes caused by
Flash On +
the light from the flash being reflected in the subject’s eyes.
Red-eye reduction
The flash will discharge regardless of lighting conditions.
4
Taking Pictures
The flash discharges automatically depending on the light
conditions.
The flash will not discharge, regardless of the brightness.
Use this mode to take pictures at dusk or in museums etc.
where flash photography is prohibited.
(No
Auto
icon)
• The flash is off when the Capture mode is set to C, the Drive mode is set
to Continuous Shooting or the Focus mode is set to H.
• The flash discharges twice, first a pre-flash and then a second time to take
the picture. (In the red-eye reduction modes, the interval between the preflash and the main flash is longer.)
• Flash effective range (effective range changes according to the sensitivity
and shooting conditions)
Wide: Approximately 0.2 m to 4.9 m
(in Night Scene Mode: Approximately 0.2 m to 3.5 m)
Tele: Approximately 0.2 m to 2.8 m
(in Night Scene Mode: Approximately 0.2 m to 2 m)
1
Press the four-way controller (4) in Capture mode.
The flash mode changes each time the button is pressed and the icon
appears on the LCD monitor.
The camera is ready to take pictures in the selected flash mode.
Status of the Focus Status Lamp and Flash Status Lamp 1p.31
Saving the Flash Mode 1p.82
67
Rec. Mode
MENU
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
2, 3
4
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+.H=
Selecting the Recorded Pixels
Taking Pictures
You can choose the number of recorded pixels from [2560×1920],
[2304×1728], [2048×1536], [1600×1200], [1024×768] and [640×480].
The more pixels there are, the larger the picture and the bigger the file size.
The data volume also varies depending on the quality level setting (1p.69).
Recorded Pixels
2560 ×1920
2304 ×1728
2048 ×1536
1600 ×1200
1024 ×768
640 ×480
1
Higher quality
4
High quality photo printing, A4 size or larger prints, editing
or creating images etc.
Postcard size prints
Use on the Internet/e-mail, etc.
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
3
4
Use the four-way controller (23)
to select [Recorded Pixels].
Use the four-way controller (45)
to change the size.
Press the OK button.
The camera is ready to take the picture.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
• The number of recorded pixels is fixed at [320×240] in Movie mode.
• Selecting a large size produces a clear picture when it is printed out.
• The Recorded Pixels setting is saved when the camera is turned off.
Recorded Pixels and Quality 1p.23
68
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+.H=
Selecting the Quality Level
Quality Levels
C
Best
D
Better
E
Good
1
Lowest compression rate. Suitable for photo prints.
Standard compression rate. Suitable for viewing the image
on a computer screen.
Highest compression rate. Suitable for attaching to e-mails
or creating websites.
4
Taking Pictures
You can choose the image compression rate.
The more stars, the clearer the quality and the larger the volume. The
data volume also varies depending on the recorded pixels setting
(1p.68).
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Quality Level].
3
Use the four-way controller (45)
to change the quality level.
4
Press the OK button.
Rec. Mode
2560
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
AWB
Multi
Auto
OK
OK
The camera is ready to take the picture.
The Quality Level setting is saved when the camera is turned off.
Recorded Pixels and Quality 1p.23
69
1
Rec. Mode
Image Quality
MENU
3, 4
Superior
Recorded pixels:
2560x1920 (5M)
Quality level:
Exit
MENU
OK
OK
5
2
-
Selecting the Image Quality
Taking Pictures
You can set the recorded pixels and quality together in Auto Select Mode. The
combination of recorded pixels and quality for each setting is shown below.
Image Quality
Setting
Recorded Pixels Quality
Number of
Pixels*
Superior
Super
Normal
2560×1920
2560×1920
2048×1536
C
D
D
5M
5M
3M
Economy
640×480
D
0.3M
Use
Higher quality
4
High quality photo printing, A4
size or larger prints, editing or
creating images etc.
Postcard size prints
Use on the Internet/e-mail, etc.
* The letter M indicates megapixel. 1 megapixel is 1 million pixels.
1
2
3
Set the mode dial to -.
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
Use the four-way controller (23)
to select [Image Quality].
Image Quality
4
Use the four-way controller (45)
to change the setting.
Recorded pixels:
2560x1920 (5M)
Quality level:
5
Press the OK button.
Rec. Mode
MENU
Exit
Superior
OK
OK
The camera is ready to take the picture.
The Image Quality function is only available in - (Auto Select) mode. In
other modes, set the recorded pixels and quality level separately.
(1p.68, 69)
70
MENU
2, 3, 4
5
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
R+C.
Adjusting the White Balance
White Balance
F Auto
G Daylight
H Shade
I
J
K
1
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Use this mode when taking pictures outside in the shade.
Use this mode when taking pictures under electric or other
Tungsten Light
tungsten light.
Fluorescent Light Use this mode when taking pictures under fluorescent light.
Use this mode when taking pictures by adjusting the white
Manual
balance manually.
4
Taking Pictures
The color of the subject changes depending on the light source. For example,
the white color in a subject is different when under natural or artificial light.
White balance is used to adjust the color of white according to the light source.
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
3
4
5
Use the four-way controller (23) to select
[White Balance].
Press the four-way controller (5). W h i t e B a l a n c e
The White Balance screen appears.
AWB
Use the four-way controller (23)
to change the setting.
Press the OK button twice.
MENU
Exit
OK
OK
The camera is ready to take the picture.
Saving the White Balance 1p.82
71
Manual Setting
Place a white material such as a piece of white paper in front of your
camera to adjust white balance.
1
2
3
Point the camera at the white
material so that it fills the frame of
the LCD monitor.
White Balance
AWB
Press the OK button.
The white balance is automatically
MENU E x i t
OK A d j u s t
adjusted. [Adjusting] appears on the LCD
monitor during adjustment.
[Complete] appears on the LCD monitor when adjustment is finished
and the display returns to the menu screen.
4
Taking Pictures
72
Select [K] (manual) on the [White Balance] screen.
4
Press the OK button.
The camera is ready to take the picture.
Any changes made to the White Balance setting are invalid in d, H
and = modes.
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+.H=
Changing the Focusing Area
You can change the autofocus area (Focusing Area).
4
Focusing Area
Spot
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Focusing Area].
3
Use the four-way controller (45)
to change the setting.
4
Press the OK button.
Taking Pictures
Multi
This is the default setting with the camera checking several points over a
larger area of the image ensuring that the main subject is in focus.
The camera only focuses on a small area in the center of the screen, this is
ideal for precise focusing on a specific point of the subject.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
The camera is ready to take the picture.
When the shutter release button is pressed while [Multi] is selected for
the focusing area, the focus frame lights at the focus position.
Always check the focusing area on the LCD monitor when using the
autofocus area to focus on your subject.
Saving the Focusing Area Setting 1p.82
73
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+C.H=
Setting the Light Metering Mode to Determine the
Exposure (AE Metering)
4
Taking Pictures
You can choose which part of the screen to use to measure the
brightness and determine the exposure.
AE Metering Modes
1
L
Multi-segment
M
Center-weighted
N
Spot
The exposure is determined by the entire screen.
The exposure is determined mainly by the center of the
screen.
The exposure is determined by the small area in the
center of the screen only.
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [AE Metering].
3
Use the four-way controller (45)
to change the AE Metering mode.
4
Press the OK button.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
The camera is ready to take the picture.
Saving the AE Metering Mode 1p.82
74
2560
AWB
Multi
Auto
OK
OK
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+.H=
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
4
Sensitivity
50
100
200
400
1
Automatically set in a range from 50 to 400 (50 to 200 in Night Scene Mode).
• The lower the sensitivity, the sharper the image and the less noise. The
shutter speed will be slower in low light conditions.
• The higher the sensitivity, the faster the shutter speed in low light
conditions to reduce camera shake, but the image may be affected by
noise.
Press the MENU button in Capture mode.
Taking Pictures
Auto
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Sensitivity].
3
Use the four-way controller (45)
to change the sensitivity.
4
Press the OK button.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
The camera is ready to take the picture.
Saving the Sensitivity 1p.82
75
MENU
2, 3
4
Rec. Mode
2560
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
AWB
Multi
Auto
OK
OK
1
C
Setting the Frame Rate
You can choose 30 fps (frames per second) or 15 fps for the frame rate.
4
1
Press the MENU button in Capture mode.
Taking Pictures
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Frame Rate].
3
Use the four-way controller (45)
to change the frame rate.
4
Press the OK button.
Rec. Mode
Frame Rate
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
MENU E x i t
The camera is ready to take the picture.
The Frame Rate setting is saved when the camera is turned off.
76
30fps
0.5sec
OK
OK
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+.H=
Setting the Instant Review Time (Instant Review)
You can choose the Instant Review time from 0.5 sec., 1 sec., 2 sec.,
3 sec., 5 sec. and Off (no display).
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Instant Review].
3
Use the four-way controller (45)
to change the display time.
4
Press the OK button.
Rec. Mode
Frame Rate
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
MENU E x i t
30fps
0.5sec
OK
4
Taking Pictures
1
OK
The camera is ready to take the picture.
The Instant Review setting is saved when the camera is turned off.
77
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
R+.
Setting the Image Sharpness (Sharpness)
4
You can choose whether you want the image to have sharp or soft
outlines.
Taking Pictures
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
3
4
Use the four-way controller (23)
to select [Sharpness].
Use the four-way controller (45)
to change the setting from
x [Normal] to z [Hard (+)] or
y [Soft (–)].
Rec. Mode
Frame Rate
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
MENU
Exit
30fps
0.5sec
OK
OK
Press the OK button.
The camera is ready to take the picture.
• Any changes made to the Sharpness setting are invalid in d, H
and = modes.
• The Sharpness setting is saved when the camera is turned off.
78
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
R+.
Setting the Color Saturation (Saturation)
You can set the color saturation.
1
4
Press the MENU button in Capture mode.
3
4
Use the four-way controller (23)
to select [Saturation].
Use the four-way controller (45)
to change the setting from
x [Normal] to z [High (+)] or
y [Low (–)].
Rec. Mode
Frame Rate
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
MENU
Exit
30fps
0.5sec
OK
Taking Pictures
The [A Rec. Mode] menu appears.
2
OK
Press the OK button.
The camera is ready to take the picture.
• Any changes made to the Saturation setting are invalid in d, H and
= modes.
• The Saturation setting is saved when the camera is turned off.
79
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
R+.
Setting the Image Contrast (Contrast)
You can set the image contrast.
4
1
Press the MENU button in Capture mode.
Taking Pictures
The [A Rec. Mode] menu appears.
2
3
4
Use the four-way controller (23)
to select [Contrast].
Use the four-way controller (45)
to change the setting from
x [Normal] to z [High (+)] or
y [Low (–)].
Rec. Mode
Contrast
EV Compensation
MENU
Exit
0.0
OK
OK
Press the OK button.
The camera is ready to take the picture.
• Any changes made to the Contrast setting are invalid in d, H and
= modes.
• The Contrast setting is saved when the camera is turned off.
80
MENU
2, 3
4
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
dR+C.H=
Setting the Exposure (EV Compensation)
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23)
to select [EV Compensation].
Use the four-way controller (45)
to change the EV setting.
Rec. Mode
Contrast
EV Compensation
0.0
4
Taking Pictures
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
To brighten, set a positive (+) value. To
MENU E x i t
OK O K
darken, set a negative (–) value.
You can choose the EV setting in the range of –2.0 EV to +2.0 EV in
1/3 EV steps.
4
Press the OK button.
The camera is ready to take the picture.
EV Compensation is registered on the four-way controller (45) in the
Fn Setting default settings in Capture mode. (1p.128) The EV setting
can be changed with the four-way controller (45) when you press the
0 button.
Saving the EV Compensation Value 1p.82
81
Saving the Settings
Saving the Menu Items (Memory)
You can choose whether you want the set values to be saved when the
camera is turned off. If you select O (On), the settings will be saved in the
status they were in immediately before the camera was turned off. If you select
P (Off), the settings will be reset to the defaults when the camera is turned off.
Item
Description
Default
Setting
The flash mode setting on the b button is saved.
O
The [White Balance] setting on the [A Rec. Mode]
menu is saved.
The [EV Compensation] setting on the
[A Rec. Mode] menu is saved.
The [Focusing Area] setting on the [A Rec. Mode]
menu is saved.
The [AE Metering] setting on the [A Rec. Mode]
menu is saved.
The [Sensitivity] setting on the [A Rec. Mode] menu
is saved.
The [Digital Zoom] setting on the [A Rec. Mode]
menu is saved.
P
Focus Mode
The focus mode setting on the ) button is saved.
Zoom Position
The optical zoom position on the Zoom button is saved.
MF
The manual focus position is saved.
P
P
P
P
Flash
4
White Balance
Taking Pictures
EV Compensation
Focusing Area
AE Metering
Sensitivity
Digital Zoom
DISPLAY
The LCD monitor display mode is saved.
File #
The file number is saved. If a new SD Memory Card is
inserted, file numbers are assigned sequentially.
P
P
P
P
O
O
• Menu items not included in [Memory] will also be saved in the settings
selected on the menus for each function when the camera is turned off.
• The zoom position setting in the digital zoom range will not be saved
even if [Zoom Position] is set to O (On) in [Memory].
• Setting [MF] to O (On) sets [Zoom Position] to O (On) at the same time.
([Zoom Position] can also be set to O (On) independently of [MF].)
82
MENU
2, 3, 4, 5
6
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
1
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (5).
The [Memory] menu appears.
Rec. Mode
Frame Rate
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
MENU
4
Use the four-way controller (23)
to choose an item.
5
Use the four-way controller (45)
to select O (On) or P (Off).
6
Press the OK button twice.
Exit
30fps
0.5sec
OK
OK
OK
OK
Memory
Flash
White Balance
EV Compensation
Focusing Area
AE Metering
Sensitivity
MENU
Exit
4
Taking Pictures
3
Use the four-way controller (23)
to select [Memory].
The camera is ready to take the picture.
83
Recording and Playback of Sound
Recording Sound (Voice Recording Mode)
You can record sound. The recordable time appears on the LCD monitor
according to how much space is available on the SD Memory Card or the
built-in memory.
2, 3
4
1
Speaker
Microphone
5
Recording and Playback of Sound
84
1
Set the mode dial to O and press the power switch.
The recordable time appears on the LCD monitor.
1 Remaining recordable time
2 Recording time
2
00 : 01
00
1 : 22
Press the shutter release button.
Recording stops. The remaining recordable
time appears.
4
01:30:22
Press the shutter release button.
Recording starts. The self-timer lamp and
flash status lamp blink during recording.
3
1
SHUTTER
Start
2
To exit Voice Recording mode, turn the camera off.
• Sound is saved in WAVE monaural files.
• The microphone is located on the front of the camera. Aim the camera
to obtain the best sound.
Playing Back Sound
You can play back the recording you made in Voice Recording mode.
1, 5
2, 3, 4
1
2
Use the four-way controller (45)
to choose the recording to play
back.
Playback time
100-0012
00
0 : 01
1 : 41
Press the four-way controller (2).
0 : 03
3 : 25
00
Playback starts.
• The following operations can be
performed during playback.
Four-way controller (2)
Zoom/f/y button (x)
Zoom/f/y button (w)
4
06/10/2005
10:25
Length of recording
Pauses
playback
Increases the volume
Reduces the volume
Press the four-way controller (3).
Playback stops.
5
Press the Q Playback button.
The camera returns to the Voice Recording mode.
5
Recording and Playback of Sound
3
Press the Q Playback button.
If you enter the Playback mode from a Capture mode other than Voice
Recording mode, the camera returns to the Capture mode in Step 5. To
record new data, set the Mode Dial to O.
85
Adding Sound (Voice Memo) to Images
You can add sound (voice memo) to a captured image.
1
2, 3
Recording a Voice Memo
5
Recording and Playback of Sound
86
1
Enter the Playback mode and use
the four-way controller (45) to
choose the image to which you
want to add a voice memo.
O appears on the four-way controller
operation guide on the LCD monitor if there
is no voice memo attached to the displayed
image.
2
100-0004
06/10/2005
10:25
Four-way controller
operation guide
Press the OK button.
Recording of the voice memo starts. You can record for up to 30
seconds.
3
Press the OK button.
Recording of the voice memo stops.
MENU
2, 3
4
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Setting the Voice Memo Recording Function
You can set the camera not to record voice memos while playing back
still images to prevent any voice memo from being recorded.
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
Use the four-way controller (23) to select
[Record Voice Memo].
3
Use the four-way controller (45) to select [On] or [Off].
On : Voice memos can be recorded while playing back still images.
(Default setting)
Off : Voice memos cannot be recorded while playing back still images.
4
Press the OK button.
The camera is ready to take or play back images.
When voice memo recording is set to off, O is not displayed while
playing back still images.
5
Recording and Playback of Sound
2
87
1, 2, 3
Playing Back a Voice Memo
1
If U appears, a voice memo has been
recorded for the displayed image.
5
Recording and Playback of Sound
88
Enter the Playback mode and use
the four-way controller (45) to
choose the image with the voice
memo that you want to play back.
2
100-0004
05sec
2005/06/10
10:25
Press the four-way controller (2).
The voice memo is played back.
3
Press the four-way controller (3).
Playback of the voice memo stops.
Deleting a Voice Memo 1p.97
.
A voice memo cannot be added to an image which already has a voice
memo. Delete the old voice memo and record a new one. (1p.97)
A voice memo cannot be added to protected (Z) images.
Memo
5
Recording and Playback of Sound
89
Playback/Deleting/Editing
Playing Back Images
Q Playback button
2
1
3
Playing Back Still Pictures
Press the Q Playback button.
Refer to “Playing Back Images” (p.32) for instructions.
Zoom Display
6
You can display images magnified up to 12 times. A guide to operation
appears on the LCD monitor during magnification.
Playback/Deleting/Editing
1
2
Enter the Playback mode and use the four-way
controller (45) to choose the image to magnify.
Press x/y on the Zoom/f/y
x1.8
button.
The image is magnified (1× to 12×). Holding
down the button changes the magnification
continuously.
3
The following operations can be performed
while the magnified image is displayed.
Four-way controller (2345) Moves the position to be magnified
Zoom/f/y button (x)
Makes the image bigger
Zoom/f/y button (w)
Makes the image smaller
Press the MENU button.
Zoom playback ends.
• Movies cannot be magnified.
• Pressing the Q Playback button does not change the mode to the
Capture mode when the camera is turned on in Playback Only mode.
Turn the camera off, then turn it on again.
90
MENU
2, 3
4
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Setting the Quick Zoom Function
You can display the image at maximum magnification simply by pressing
the Zoom/f/y button once during zoom playback.
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
Use the four-way controller (23) to select
[Quick Zoom].
3
Use the four-way controller (45) to select [On] or [Off].
4
Press the OK button.
The camera is ready to take or play back images.
6
Playback/Deleting/Editing
On : Pressing x/y on the Zoom/f/y button once displays the
image at maximum magnification.
Off : Pressing x/y on the Zoom/f/y button once magnifies the
image in steps.
91
4
1, 2, 3
Playing Back Movies
You can play back movies. A guide to operation appears on the LCD
monitor during playback. Sound is recorded at the same time.
1
Enter the Playback mode and use the four-way
controller (45) to choose the movie to play back.
2
Press the four-way controller (2).
Playback starts.
6
Playback/Deleting/Editing
• The following operations can be
performed during playback.
Four-way controller (4) Reverse playback
Four-way controller (5) Forward playback
Four-way controller (2) Pause
Zoom button w/x
Adjusts the volume
100-0021
00:02:25
00:05:30
06/10/2005
10:25
Length of recording
• The following operations can be performed while Pause is engaged.
Four-way controller (4) Frame reverse
Four-way controller (5) Frame forward
Four-way controller (2) Releases the Pause function
3
Press the four-way controller (3).
Playback stops and the screen returns to the start playback screen.
4
Press the Q Playback button.
The camera returns to Capture mode.
92
Playback time
Displaying Shooting Information in Playback Mode
Shooting information can be displayed on the LCD monitor in Playback
mode. Pressing the DISPLAY button changes the display mode.
Normal Display
Shooting information is displayed.
1 Protect icon
2 Voice Memo icon
3 Folder name and file name
4 Card/Built-in memory icon
5 Four-way controller operation guide
6 Shooting date and time
7 Battery level indicator
12
4
100-0004
06/10/2005
10:25
7
1
6
5
234
100-0004
2304
6
AWB
AUTO
1/30
F2.6
06/10/2005
10:25
8 7 6
5
No Icons
No shooting information is displayed.
Playback/Deleting/Editing
Histogram Display
The brightness distribution of the image is
displayed. The horizontal axis of the
histogram shows the brightness (darkest at
the left end and brightest at the right end)
and the vertical axis shows the number of
pixels.
1 Sensitivity
2 Recorded pixels
3 Quality
4 White balance
5 Histogram
6 Shutter speed
7 Aperture
8 AE metering
3
Normal Display
Saving the Display Mode 1p.82
93
2, 3
1
Nine Image Display
You can display nine images at the same time.
1
Enter the Playback mode and use the four-way
controller (45) to choose an image.
2
Press w/f on the Zoom/f/y
button.
100-0017
1
Nine images appear.
Use the four-way controller (2345) to
choose an image. When ten or more
2
images have been recorded, the previous
nine images appear when you press the
Selected image
four-way controller (4) while image 1 is
selected. Similarly, the next nine images
appear when you press the four-way controller (5) while image 2 is
selected.
6
Playback/Deleting/Editing
3
Press w/f or x/y on the Zoom/f/y button.
The screen returns to full screen display of the selected image.
Pressing Q button, 0 button, OK button or DISPLAY button
returns the screen to full screen display of the selected image.
Pressing the i Delete button while selecting an image opens the Delete
screen.
94
1, 3, 4
5
2
Slideshow
You can play back all the images on the SD Memory Card or in the builtin memory continuously.
1
Enter the Playback mode and use the four-way
controller (45) to choose the image with which to start
the slideshow.
2
Press the MENU button.
The [Q Playback] menu appears.
Use the four-way controller (23)
to select [Slideshow].
4
Use the four-way controller (45)
to change the playback interval.
MENU
Exit
3sec
OK
OK
Choose from the following: 3 sec, 5 sec, 10 sec, 20 sec, 30 sec.
5
Press the OK button.
[Start] appears on the LCD monitor and playback starts at the set
interval.
Press any button, such as the OK button or MENU button, to stop the
slideshow. [Stop] appears on the LCD monitor.
6
Playback/Deleting/Editing
3
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
• The slideshow will continue until you press any button.
• Movies and pictures with a voice memo will be played through to the
end before the next picture is played back, regardless of the set
playback interval.
• Recordings made in Voice Recording mode are not played back.
95
Deleting
2
1, 3
4
Deleting Individual Images or Sounds
You can delete images and sound recordings one at a time.
• Once deleted, images cannot be restored.
• You cannot display the Delete screen from protected images. (1p.99)
6
Playback/Deleting/Editing
96
1
Enter the Playback mode and use the four-way
controller (45) to choose the image or sound to
delete.
2
Press the i Delete button.
The Delete screen appears.
3
4
Use the four-way controller (2) to
select [Delete].
Press the OK button.
Delete
Cancel
All
MENU E x i t
OK
OK
The image and sound are deleted.
• You can also delete images from Instant Review (1p.77). However,
you cannot delete images if the display time is set to 0.5 seconds.
• You can also delete images from the nine image display (1p.94).
However, you cannot delete protected images. (1p.99)
• If [Quick Delete] is set to [On] in the [Q Playback] menu, Step 3 can
be omitted. (1p.97)
Deleting a Voice Memo only
If an image has a voice memo, you can delete the voice memo without
deleting the image.
1
Enter the Playback mode and use the four-way
controller (45) to choose an image with a voice memo
to delete.
2
Press the i Delete button.
The Delete screen appears.
3
Use the four-way controller (2) to
select [Sound Deletion].
4
Press the OK button.
Sound Deletion
Delete
Cancel
All
Exit
MENU
OK
OK
The voice memo is deleted.
Select [Delete] in Step 3 above to delete both the image and the voice
memo.
Setting the Quick Delete Function
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
3
4
Use the four-way controller (23) to select [Quick Delete].
Use the four-way controller (45) to select [On] or [Off].
Press the OK button.
The camera is ready to take or play back images.
6
Playback/Deleting/Editing
When the Quick Delete function is set to On, the Delete screen appears
with [Delete] already selected.
97
1
2
3
Deleting All Images
You can delete all the images and sounds at once.
• Once deleted, images cannot be restored.
• Protected images and sounds cannot be deleted.
1
Press the i Delete button twice in Playback mode.
The Delete All screen appears.
6
Playback/Deleting/Editing
98
2
3
Use the four-way controller (2) to select [Delete All].
Press the OK button.
All the images and sounds are deleted.
Delete all images
and sounds
Delete All
Cancel
MENU
Exit
You can also delete images from Instant Review (1p.77).
OK
OK
MENU
2, 3, 4, 5
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Protecting Images and Sounds from Deletion
(Protect)
You can protect images and sounds from being accidentally deleted.
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
3
Use the four-way controller (23) to select [Protect].
Press the four-way controller (5).
100-0004
The Protect screen appears.
5
Use the four-way controller (45)
to choose the image or sound to
protect.
6
Unprotect
MENU
Exit
DISP
All
Use the four-way controller (23)
to select [Protect].
100-0004
Y appears on the image or sound. Select
[Unprotect] to cancel the Protect setting.
Protect
MENU
Exit
DISP
All
Playback/Deleting/Editing
4
99
4
MENU
2, 3, 5
6
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Protecting All Images and Sounds
You can protect all the images and sounds.
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
3
Use the four-way controller (23) to select [Protect].
Press the four-way controller (5).
100-0004
The Protect screen appears.
Unprotect
6
Playback/Deleting/Editing
4
5
6
MENU
Exit
DISP
All
Press the DISPLAY button.
The Protect All screen appears.
Protect all images
& sounds
Use the four-way controller (2) to
select [Protect].
Press the OK button.
Protect
Unprotect
MENU
Exit
OK
OK
Select [Unprotect] in Step 5 to cancel the Protect setting on all the
images and sounds.
Even protected images and sounds will be deleted by formatting the SD
Memory Card or the built-in memory.
100
Viewing Images on a TV
PC/AV
terminal
By using the AV cable, you can capture and play back images on a
TV or other equipment with a video IN jack. Make sure that both the
TV and the camera are turned off before connecting the cable.
Open the terminal cover and connect the AV cable to
the PC/AV terminal.
2
Connect the other end of the AV cable to the image
input terminal and sound input terminal on the TV.
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
3
Turn the TV and camera on.
Changing the Video Output Format 1p.125
If you intend to use the camera for a long time, use of the AC adapter
D-AC5 (optional) is recommended. Refer to the operating manual for the
TV or equipment to which the camera is connected.
6
Playback/Deleting/Editing
1
101
Remote control receiver
1
2
Remote control unit E
(Remote control unit F has
no zoom button.)
Using the Remote Control Unit (optional) to View
the Previous or the Next Image
You can use the remote control unit to view the next image or the previous
image while watching the images on a TV.
1
6
Playback/Deleting/Editing
102
Press the shutter release button on the remote control
unit.
The image following the current image is played.
2
Press the remote zoom button on the remote control
unit.
The image preceding the current image is played.
• Using the remote control unit to view the next or previous image is only
enabled when the AV cable is connected.
• You can only use the remote control unit to view the next or previous
image when playing back still images in the 1 image screen (normal).
You cannot use the remote control unit to start or stop movies, still
images with sound or sound only files, so use the buttons on the
camera. Also, the remote control unit cannot be used at all while
movies, still images with sound or sound only files are being played
back or are paused.
• You need the remote control unit E (optional) to view the next or
previous image.
• You can only view the next image with the remote control unit F
(optional).
Setting the Printing Service (DPOF)
You can print the images on the SD Memory Card or the built-in memory
using a DPOF (Digital Print Order Format) compatible printer or at a
printing service.
MENU
2, 3, 4, 5, 6
7
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Printing Single Images
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
3
Use the four-way controller (23) to select [DPOF].
Press the four-way controller (5).
The DPOF screen appears.
4
Use the four-way controller (45)
to choose an image to print, then
press the four-way controller (3).
100-0001
The frame moves to [Copies].
00
Copies
Date
MENU
Exit
DISP
6
Playback/Deleting/Editing
Set the following items for each image.
Copies: Choose the number of copies up to a maximum of 99.
Date: Specify whether you want the date inserted on the print or not.
To set the items for images stored in the built-in memory, check that
there is no SD Memory Card inserted in the camera.
All
OK
OK
103
5
Use the four-way controller (45)
to choose the number of copies,
then press the four-way controller
(3).
100-0001
6
01
Copies
Date
The frame moves to [Date].
MENU
Exit
DISP
Use the four-way controller (45)
to choose whether to insert the date or not.
All
OK
OK
O(On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
7
Press the OK button.
Prints can be made according to the settings.
6
Playback/Deleting/Editing
104
• If DPOF settings have already been made for an image, the previous
number of copies and date setting will be displayed.
• To cancel DPOF settings, set the number of copies to 0 and press the
OK button.
• To print images stored in the built-in memory according to DPOF
settings at a photo processing lab., follow the procedure in “Copying
Files” (p.114 - 115) and copy the files from the built-in memory to the
SD Memory Card first.
• You cannot set the printing service for movies or sound-only files.
• Depending on the printer or printing equipment at the photo
processing lab., the date may not be imprinted on the pictures even if
the DPOF setting was made.
• Pictures may not be printed correctly when the camera is connected
directly to a PictBridge-compatible printer if the total number of copies
exceeds 500.
4
MENU
2, 3, 5, 6, 7
8
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Printing All Images
1
2
3
4
5
7
8
The [Q Playback] menu appears.
Use the four-way controller (23) to select [DPOF].
Press the four-way controller (5).
The DPOF screen appears.
Press the DISPLAY button.
Use the four-way controller (45)
to choose the number of copies.
DPOF setting for all
images
You can print up to 99 copies.
Copies
Date
Press the four-way controller (3).
The frame moves to [Date].
MENU
Exit
6
00
OK
OK
Use the four-way controller (45)
to choose whether to insert the date or not.
O(On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
Press the OK button.
Prints can be made according to the settings.
• The number of copies specified in the DPOF settings applies to all the
images. Before printing, check that the number is correct.
• Pictures may not be printed correctly when the camera is connected
directly to a PictBridge-compatible printer if the total number of copies
exceeds 500.
Playback/Deleting/Editing
6
Press the MENU button in Playback mode.
• Settings for single images are cancelled when settings are made for
all images.
• DPOF settings are not possible for movies or sound only files.
105
Direct Printing Using PictBridge
By connecting the camera to a printer that supports PictBridge using the USB
cable (I-USB7) supplied with the camera, you can print images directly from
the camera without using a PC. Select the images you want to print and the
number of copies on the camera after it has been connected to the printer.
• You are recommended to use the AC adapter D-AC5 (optional) while
the camera is connected to the printer. The printer may not work
properly or the image data may be damaged if the batteries run out of
power while the camera is connected to the printer.
• The flash status lamp blinks slowly while data is being transferred from
the camera to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the
camera (such as image quality and DPOF settings) may be valid.
• Pictures may not be printed correctly when the camera is connected
directly to a PictBridge-compatible printer if the total number of copies
exceeds 500.
The camera will turn off automatically when you remove the USB cable.
6
Playback/Deleting/Editing
Connecting the Camera to the Printer
1
2
Select [PictBridge] for [USB Connection] on the
[B Set-up] menu.
1“Changing the USB Connection Mode” (p.126)
Connect the camera to the printer
using the USB cable supplied with
the camera.
The PictBridge menu appears.
Print All
Print One
Print w/ DPOF settings
OK
OK
Do not connect the camera to your PC while [PictBridge] is selected for
the USB connection mode.
See Step 4 in the “PC Connection Manual” if the camera has been
connected to a PC while “PictBridge” is set.
106
Printing Single Images
1
Use the four-way controller (23)
to select [Print One].
2
Press the OK button.
The Print One screen appears.
Print All
Print One
Print w/ DPOF settings
OK
3
4
Use the four-way controller (45)
to choose the image to print.
100-0001
Print this image
Use the four-way controller (23)
to choose the number of copies.
You can print up to 99 copies.
5
OK
C o p i e s 01
DISP
MENU
Date
Exit
OK
Date
Print
O(On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
6
Press the OK button.
Prints will be made according to the settings.
To cancel printing during operation, press the MENU button.
6
Playback/Deleting/Editing
Use the DISPLAY button to choose whether to insert
the date or not.
107
Printing All Images
1
2
Use the four-way controller (23) to select [Print All].
Press the OK button.
The Print All screen appears.
3
Use the four-way controller (23)
to choose the number of copies.
The number of copies you choose applies to
all the images.
4
Print All
Copies
01
20
Total
DISP
MENU
Date
Exit
OK
Date
Print
Use the DISPLAY button to choose whether to insert
the date or not.
O(On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
5
Press the OK button.
All the images will be printed according to the settings.
To cancel printing during operation, press the MENU button.
6
Playback/Deleting/Editing
108
Printing Using the DPOF Settings
1
Use the four-way controller (23) to select
[Print w/ DPOF settings].
2
Press the OK button.
The Print w/ DPOF Settings screen
appears.
Use the four-way controller (45) to check
the image and the print settings.
3
Press the OK button.
100-0001
Print w/ DPOF settings
C o p i e s 05
Date
Total 10
MENU
Exit
OK
Print
The selected image will be printed
according to the DPOF settings.
To cancel printing during operation, press the MENU button.
Disconnecting the Camera from the Printer
Disconnect the camera from the printer when you have finished printing.
1
2
3
Turn the camera off.
Disconnect the USB cable from the camera.
Disconnect the USB cable from the printer.
6
Playback/Deleting/Editing
109
Editing Images
MENU
2, 3, 4, 6,
7, 8, 10
5, 9, 11
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Changing the Image Size and Quality
By changing the size and quality of a selected image, you can make the
file smaller than the original. You can use this function to continue taking
pictures when the SD Memory Card or the built-in memory is full, by
making the images smaller and overwriting the original images to make
more space available in the memory.
6
1
Press the MENU button in Playback mode.
Playback/Deleting/Editing
The [Q Playback] menu appears.
2
3
Use the four-way controller (23) to select [Resize].
Press the four-way controller (5).
100-0001
The Resize screen appears.
MENU
Exit
OK
4
Use the four-way controller (45) to choose the image
to resize.
5
Press the OK button.
The screen for selecting the resolution and quality appears.
110
OK
6
Use the four-way controller (45)
to change the recorded pixels.
7
Press the four-way controller (3).
The frame moves to [Quality Level].
8
9
10
11
Use the four-way controller (45)
to change the quality.
100-0001
Select resolution and
quality
Recorded Pixels
Quality Level
MENU
Exit
1600
OK
OK
Press the OK button.
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Press the OK button.
The resized image is saved.
• Movies cannot be resized.
• You cannot select a larger size than that of the original image.
• You cannot select a higher quality than that of the original image.
6
Playback/Deleting/Editing
111
MENU
2, 3, 4, 5, 7
6, 8
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
Editing Pictures with Digital Filters
The digital filters consist of eight color filters (black-and-white, sepia, red,
green, blue, black-and-white + red, black-and-white + green, black-andwhite + blue), a soft filter, five illustration filters and two special effect
filters. The Digital Filter mode enables you to edit pictures using these
filters. The image which has been created with the special effect appears on
the LCD monitor.
Images that have been edited with the digital filter are saved as “Better
(D)” regardless of the quality of the original image.
6
Playback/Deleting/Editing
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
Use the four-way controller (23)
to select [Digital Filter].
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
3
Exit
Press the four-way controller (5).
112
Use the four-way controller (45)
to choose the image to edit.
OK
OK
100-0003
An image that can be edited with the digital
filters appears.
4
3sec
MENU
Exit
OK
OK
5
Use the four-way controller (23)
to choose a digital filter.
The filter effect is created and the image
appears on the LCD monitor. The example
shows an image with illustration filter 1
effect.
6
7
8
100-0003
1
MENU
Exit
OK
OK
Press the OK button.
Use the four-way controller (23) to select [Overwrite]
or [Save as].
Press the OK button.
The image is saved with the digital filter effect.
6
Playback/Deleting/Editing
113
Copying Files
MENU
2, 3, 4, 5, 6
7
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
Exit
3sec
OK
OK
1
You can copy image and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when a
card has been inserted in the camera.
When files are copied from the built-in memory to the SD Memory Card,
all the files are copied at once. When files are copied from the SD
Memory Card to the built-in memory, the files are copied one at a time.
Be sure to turn the camera off before inserting or removing the SD
Memory Card.
6
Playback/Deleting/Editing
1
Press the MENU button in Playback mode.
The [Q Playback] menu appears.
2
Use the four-way controller (3) to select [Copy image/
sound].
3
Press the four-way controller (5).
The Image/Sound Copy screen appears.
Choose the copying method you want to
use.
Playback
Protect
DPOF
Slideshow
Resize
Image/Sound Copy
Digital Filter
MENU
114
Exit
3sec
OK
OK
To Copy Files from the Built-in Memory to the SD Memory Card
4
Use the four-way controller (23)
to select [ 5 ] and press the
OK button.
Image/Sound Copy
All the files are copied to the SD Memory
Card.
Cancel
MENU
Exit
OK
OK
To Copy Files from the SD Memory Card to the Built-in Memory
4
Use the four-way controller (23) to select [
and press the OK button.
5
Use the four-way controller (45)
to select the file to copy.
6
Press the OK button.
The selected file is copied to the built-in
memory.
]
5
100-0001
SD
Copy this image & sound
MENU
Exit
OK
OK
6
Playback/Deleting/Editing
• If the image has a voice memo attached, the voice memo will be
copied at the same time as the image.
• When a file is copied from the SD Memory Card to the built-in memory,
it is assigned a new file name.
115
Settings
Camera Settings
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
Formatting an SD Memory Card or the Built-in
Memory
Formatting will delete all the data on the SD Memory Card if you are
using a card, and all the data in the built-in memory if there is no card
inserted.
• Do not turn off the camera or remove the battery or SD card or
disconnect the AC Adapter until the formatting is complete or the
memory card may be damaged.
• SD Memory Cards formatted on a PC or device other than the camera
cannot be used. Be sure to format the card with the camera.
• Formatting will delete protected data too.
7
Settings
1
2
Select [Format] on the [B Set-up] menu.
Press the four-way controller (5).
The Format screen appears.
3
Use the four-way controller (23)
to select [Format].
4
Press the OK button.
Format
All data deleted
Format
Cancel
MENU
Formatting starts. When formatting is
completed, the camera is ready to take pictures.
116
Exit
OK
OK
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
Exit
OK
OK
Changing the Sound Settings
You can adjust the playback volume and the volume of operation
sounds, such as the start-up sound, shutter sound and key operation
sound. You can also change the type of sound.
1
Select [Sound] on the [B Set-up]
menu.
Choosing [0] turns the volume off.
2
Press the four-way controller (5).
The Operation Sound screen appears.
Sound
Volume
Start-up Sound
Shutter Sound
Operation Sound
MENU
Exit
1
1
1
OK
OK
Changing the Volume
Press the four-way controller (23) to select [Volume].
Use the four-way controller (45) to adjust the volume.
Press the OK button twice.
The camera is ready to take or play back images.
7
Settings
3
4
5
Changing the Type of Start-up Sound, Shutter Sound and Key
Operation Sound
3
4
5
Use the four-way controller (23) to select [Start-up Sound].
Use the four-way controller (45) to select [1], [2], [3] or [Off].
Change the [Shutter Sound] and [Operation Sound] in the same way.
Press the OK button twice.
The camera is ready to take or play back images.
The Sound settings are saved when the camera is turned off.
117
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
Changing the Date and Time
You can change the initial date and time settings. You can also set the
style in which the date and time appears on the camera.
1
2
Select [Date Adjust] on the [B Set-up] menu.
Press the four-way controller (5).
The Date Adjust screen appears.
3
Press the four-way controller (23),
to select the date display style.
Date Adjust
Date Style
Choose [mm/dd/yy], [dd/mm/yy] or
[yy/mm/dd].
00 : 00
7
Settings
4
MENU
Press the four-way controller (5).
The frame moves to [24H].
5
118
Exit
OK
OK
Date Adjust
Date Style
Press the four-way controller (23),
to select the time display style.
Select [12H] to display the time in a 12 hour
format, or select [24] to display the time in a
24 hour format.
m m / d d / y y 24H
01 / 01 / 2005
m m / d d / y y 24H
01 / 01 / 2005
00 : 00
MENU
Exit
OK
OK
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
6
Exit
OK
OK
Press the four-way controller (5).
The frame moves to month.
7
Press the four-way controller
(23) to change the month.
Date Adjust
Date Style
m m / d d / y y 12H
01 / 01 / 2005
AM 12 : 00
Set the day and year in the same manner.
MENU E x i t
OK O K
(Pressing the four-way controller (4)
moves the frame to the previous item.)
If you select [12H] in step 3, the setting switches between AM and PM
corresponding to the time.
8
Press the OK button twice.
The camera is ready to take pictures.
7
Settings
119
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
2560
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
AWB
Multi
Auto
Exit
OK
OK
Setting the World Time
The date and time selected in “Initial Setting” (p.27) serve as the Home
Time setting.
You can display the time in a city other than the Home Time city (World
Time). This is useful when taking pictures abroad.
1
2
Select [World Time] on the [B Set-up] menu.
Press the four-way controller (5).
The World Time screen appears.
World Time
City
DST
NYC
18:52
City
DST
NYC
18:52
7
MENU
Settings
3
Exit
OK
OK
Use the four-way controller (45) to select O or P.
O : The time in the city selected in World Time is displayed.
P : The time in the city selected in Home Time is displayed.
4
Press the four-way controller (3).
If New York is selected as the World Time city, the location of New
York is marked on the world map and X indicates the current time in
New York (NYC).
5
120
Use the four-way controller (45) to select the X
(World Time) city and press the four-way controller (3).
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
6
Exit
OK
OK
Use the four-way controller (45) to turn [DST] O (On)
or P (Off) and press the four-way controller (3).
The frame moves to W (Home Time) city.
The default setting of the W (Home Time) city is [NYC (New York)].
Use the four-way controller (45) to change the W (Home Time) city
and choose the DST setting.
7
Press the OK button twice.
The camera is ready to take or play back images with the time in the
selected city.
Refer to page 130 for the list of cities and code names.
7
Settings
121
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
Changing the Start-up Screen, Background Color
and Screen Effects
1
2
Select [Screen Setting] on the [B Set-up] menu.
Press the four-way controller (5).
Screen Setting
The Screen Setting screen appears.
Start-up Screen
Background color
Screen Effect
MENU
Exit
1
OK
OK
Changing the Start-up Screen
7
Settings
You can display an image recorded with the camera as the welcome
screen when the camera is turned on.
3
Use the four-way controller (23) to select [Start-up
Screen].
4
Press the four-way controller (5).
The Change Start-up screen appears.
5
Use the four-way controller (45)
to select O (On) or P (Off).
O(On) : Displays the start-up screen
P (Off) : Hides the start-up screen
6
7
122
Start-up Screen
Start-up Screen
Optio
DISP
MENU
Image
Exit
OK
OK
Press the DISPLAY button.
Use the four-way controller (45) to choose an image
for the start-up screen.
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
8
Exit
OK
OK
Press the OK button four times.
The camera is ready to take or play back images.
Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card or built-in memory is
formatted.
Changing the Background Color
You can choose the background design and color of the LCD monitor.
3
4
Use the four-way controller (23)
to select [Background Color].
The background color of the menu changes.
5
MENU
Exit
1
OK
7
OK
Press the OK button twice.
The camera is ready to take or play back images.
Settings
Use the four-way controller (45)
to choose the background color.
Screen Setting
Start-up Screen
Background color
Screen Effect
Using Screen Effects
You can display various animated effects when switching display
screens on the LCD monitor.
3
4
5
Use the four-way controller (23) to select [Screen Effect].
Use the four-way controller (45) to select O (On) or P (Off).
Press the OK button twice.
The camera is ready to take or play back images.
123
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
Changing the Display Language
You can change the language in which the menus, error messages, etc.
are displayed.
You can choose from English, French, German, Spanish, Italian,
Russian, Korean, Chinese (traditional and simplified) and Japanese.
1
2
3
Select [Language/
] on the [B Set-up] menu.
Use the four-way controller (45) to choose the
language.
Press the OK button.
The camera is ready to take or play back images.
7
Settings
Adjusting the Brightness of the LCD Monitor
You can adjust the brightness of the LCD monitor.
1
2
Select [Brightness Level] on the [B Set-up] menu.
Press the four-way controller (5).
Brightness Level
The Brightness Level screen appears.
3
4
Use the four-way controller (45)
to adjust the brightness.
The monitor gets darker as the bar slider
moves to the left and brighter as it moves to
the right.
MENU
Press the OK button twice.
The camera is ready to take or play back images.
124
Exit
OK
OK
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
Exit
OK
OK
Changing the Video Output Format
You can choose the output format (NTSC or PAL) for taking or playing
back images on a TV or other video device.
1
2
Select [Video Out] on the [B Set-up] menu.
Use the four-way controller (45) to select [NTSC] or
[PAL].
Choose the video output format to match the output format of the TV
or other video device.
3
Press the OK button.
The camera is ready to take or play back images.
7
Settings
125
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
Changing the USB Connection Mode
You can change the USB connection mode depending on whether the
USB cable is to be connected to a printer (PictBridge) or a computer.
1
2
Select [USB Connection] on the [B Set-up] menu.
Press the four-way controller (5).
The USB connection mode selection screen
appears.
3
7
Press the four-way controller
(23) to change the USB
connection mode.
USB Connection
PC
PictBridge
MENU
Exit
OK
OK
Settings
For computers: PC
For printers: PictBridge
4
Press the OK button twice.
The camera is ready to be connected to the computer or printer.
Do not connect the camera to your PC while [PictBridge] is selected for
the USB connection mode.
Refer to the “PC Connection Manual” for instructions on connecting the
camera to a printer or a computer.
Direct Printing Using PictBridge 1p.106
126
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
Exit
OK
OK
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
2
3
Select [Auto Power Off] on the [B Set-up] menu.
Use the four-way controller (45) to select [2 min],
[3 min], [5 min] or [Off].
Press the OK button.
The camera is ready to take or play back images.
The Auto Power Off function will not work when the USB cable is
connected.
7
You can reset all the settings other than the date adjust, language/
and world time.
1
2
Settings
Resetting to Default Settings (Reset)
Select [Reset] on the [B Set-up] menu.
Press the four-way controller (5).
The Reset screen appears.
3
4
Use the four-way controller (2) to select [Reset].
Press the OK button.
The camera is ready to take or play back images.
127
How to call the [B Set-up] menu
MENU
Four-way controller
OK button
MENU button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
Exit
2560
AWB
Multi
Auto
OK
OK
Registering Functions
You can choose the functions you use most frequently from those listed
in the [A Rec. Mode] menu and register them on the four-way controller.
The functions can then be retrieved in Capture mode by pressing the
0 button to display the Function Mode screen, enabling you to
change the setting using the four-way controller.
Registering a Function
1
2
7
3
Settings
4
5
Select [Fn Setting] on the [B Set-up] menu.
Press the four-way controller (5).
Fn Setting
The Fn Setting screen appears.
Use the four-way controller (23)
to choose a key on which to
register a function.
Use the four-way controller (45)
to choose the function to register.
Recorded Pixels
Quality Level
EV Comp. (-)
EV Comp. (+)
MENU
Exit
OK
OK
The default settings are as follows: Recorded Pixels on 2, Quality Level
on 3, EV Compensation (–) on 4 and EV Compensation (+) on 5.
Select [Off] if you do not want to register a function.
Press the OK button twice.
The camera is ready to take or play back images.
• Only one function can be registered on each key of the four-way controller.
• You can choose from the following ten functions: Recorded Pixels,
Quality Level, White Balance, Focusing Area, AE Metering, Sensitivity,
Sharpness, Saturation, Contrast and EV Compensation (+) / (–).
Select [Off] if you do not want to register a function.
128
Set-up
Format
Sound
Date Adjust
World Time
On
mm/dd/yy
Off
English
Screen Setting
MENU
Exit
OK
OK
• EV Compensation (+) and (–) must be registered as a pair, with (+) on
2 and (–) on 3, or (–) on 4 and (+) on 5. It is not possible to register
only EV Compensation (+) or (–), or to reverse the plus/minus
functions.
• Functions cannot be registered in - (Auto Select) mode.
Retrieving a Function
1
Align the mode dial with one of the
following; d , R , + , . , H , =.
2
Press the 0 button in Capture
mode.
4
2304
+0.7
The functions registered on the four-way
controller (2345) appear.
Use the four-way controller
(2345) to choose the registered function and
change the setting.
Pressing the DISPLAY button when EV Compensation is registered on
the four-way controller displays a histogram showing the EV setting.
(1p.81)
When White Balance is registered and you select K (manual), press
the OK button to adjust the white balance. (1p.72)
7
Settings
3
Fn
Press the 0 button or the shutter release button.
The setting is saved and the camera is ready to take pictures.
• You cannot access functions by pressing the 0 button in - (Auto
Select) mode, O (Voice Recording) or C (Movie).
• Pressing the 0 button in - (Auto Select Mode) displays the Help
screen. (1p.48)
129
Appendix
List of City Codes
Refer to the following list of city codes when setting the World Time.
8
Appendix
130
TYO
GUM
SYD
NOU
WLG
AKL
PPG
HNL
ANC
YVR
SFO
LAX
YYC
DEN
MEX
CHI
MIA
YTO
NYC
SCL
CCS
YHZ
BUE
SAO
RIO
MAD
LON
PAR
MIL
ROM
BER
Tokyo
Guam
Sydney
Noumea
Wellington
Auckland
Pago Pago
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Mexico City
Chicago
Miami
Toronto
New York
Santiago
Caracas
Halifax
Buenos Aires
Sao Paulo
Rio de Janeiro
Madrid
London
Paris
Milan
Rome
Berlin
JNB
IST
CAI
JRS
MOW
JED
THR
DXB
KHI
KBL
MLE
DEL
CMB
KTM
DAC
RGN
BKK
KUL
VTE
SIN
PNH
SGN
JKT
HKG
PER
BJS
SHA
MNL
TPE
SEL
ADL
Johannesburg
Istanbul
Cairo
Jerusalem
Moscow
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Rangoon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho Chi Minh
Jakarta
Hong Kong
Perth
Beijing
Shanghai
Manila
Taipei
Seoul
Adelaide
Optional Accessories
A number of dedicated accessories are available for this camera.
AC adapter D-AC5
USB cable I-USB7 (∗)
AV cable I-AVC7 (∗)
Camera case O-CC32
Strap O-ST20 (∗)/Sports strap O-ST30/Leather Strap O-ST24/
Strap O-ST8
Remote control unit E
Remote control unit F
Products marked with an asterisk (∗) are the same as those supplied
with the camera.
8
Appendix
131
Messages
Messages such as the following may appear on the LCD monitor during
camera operation.
Messages during shooting
Compression error
Memory card full
Built-in memory full
Battery depleted.
the image is not stored
Image folder cannot be
created.
Compression of the image you captured has failed. Change
the quality/size and try again.
The SD Memory Card or the built-in memory is full and no
more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
(p.21, 96)
Or change the quality/size and try again. (p.110)
The batteries are exhausted.Replace with new batteries. If
using rechargeable batteries, charge the batteries (p.16).
It may also appear when you turn on the power after
purchasing the camera or after replacing the batteries if the
batteries had been removed for a long time. (p.25)
The largest file number has been assigned to an image and
no more images can be saved. Insert a new SD Memory
Card or format the SD Memory Card or built-in memory.
(p.116)
Messages during playback
No image/sound
8
Appendix
132
There are no image/sound files on the SD Memory Card or
in the built-in memory.
Camera cannot play this You are trying to play back an image or sound in a format
image/sound
not supported by this camera. You may be able to play it
back on another brand of camera or PC.
The card memory is not When copying data from the built-in memory to an SD
enough to copy images Memory Card with [Image/Sound Copy], there is not
& sounds
enough space available on the SD Card.
You can insert a new SD Memory Card (p.21), delete
unwanted data (p.96) or change the quality level and
recorded pixels (p.110).
The built-in memory is
When copying data from an SD Memory Card to the built-in
not enough to copy
memory with [Image/Sound Copy], there is not enough
images & sounds
space available on the built-in memory.
You can delete unwanted data (p.96) or change the quality
level and recorded pixels (p.110).
Messages for both
Memory card error
Card not formatted
Card locked
Data being recorded
Deleting
Formatting
Battery depleted
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to play back
images or sounds on a PC.
The SD Memory Card you have inserted is unformatted or
has been formatted on a PC or other device and is not
compatible with this camera. (p.116)
The SD Memory Card is write-protected. (p.22)
The image is being recorded on the SD Memory Card or in
the built-in memory.
The protect setting or DPOF setting is being changed.
The movie is being recorded.
The image is being deleted.
The SD Memory Card or built-in memory is being formatted.
The battery is exhausted. Insert new batteries or if using a
rechargeable battery, charge the battery with the charger
(p.16).
It may also appear when you turn on the power after
purchasing the camera or after replacing the batteries if the
batteries had been removed for a long time. (p.16)
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
No paper in the printer
No ink in the printer
Printer error
Data error
Paper stuck in the
printer
There is no paper in the printer.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
The paper in the printer has jammed.
8
Appendix
133
Troubleshooting
Problem
Cause
Camera will not Batteries are not
turn on
installed
Batteries are installed
incorrectly
Battery power is low
No image on
the LCD
monitor
Shutter will not
release
8
Appendix
134
Picture is dark
LCD monitor is set to
OFF
Camera is connected to
a PC by the USB cable
Camera is connected to
a TV
Image is displayed but is
hard to see
Flash is charging
Remedy
Check batteries are installed .If not, install
batteries.
Check orientation of batteries.
Reinsert batteries according to the +symbols on the battery compartment.
(p.16)
Insert new or charged batteries or use the
AC adapter.
Press DISPLAY button to turn LCD
monitor on. (p.45)
LCD monitor is off when camera is
connected to a PC.
LCD monitor is off when camera is
connected to a TV.
Image on LCD monitor may be hard to see
when taking pictures outside in sunlight.
When flash status lamp blinks red, flash is
charging and no pictures can be taken.
Lamp lights red when charging is
completed.
Insert SD Memory Card with available
space or delete unwanted images.
(p.21, 96)
Wait until recording is finished.
Picture becomes dark if subject is too far
away. Take picture within range of flash.
No available space on
SD Memory Card or in
built-in memory
Recording
Subject is too far away in
a dark environment,
such as a night scene
Background is dark
When taking a picture of a person against
a dark background, such as a night scene,
the background may appear dark if the
flash does not reach it even with the
correct exposure. Set to . mode to
ensure both person and background are
clear. (p.44)
Problem
Cause
Subject is not in Subject is difficult to
focus
focus on
Subject is not in focusing
area
Subject is too close
Zoom does not function in Super Macro
mode.
The “Battery depleted” error message
may appear when you turn on the power
after purchasing the camera or after
replacing the batteries if the batteries had
been removed for a long time. However,
this is not an error. Wait a short period and
then turn the power switch on again, the
power should come on normally. If this
happens, the date and time, recorded
pixels and other settings may have been
initialized, reset the various settings
according to the procedures in “Setting
the Shooting Functions” (p.65 to 81) and
“Camera Settings” (p.116 to 129).
8
Appendix
Focus mode is set on
q (Macro) or r (Super
Macro)
Flash does not Flash mode is set to Off
discharge
The Capture mode is set
to C or J in d mode,
Continuous Shooting or
Infinity-Landscape
mode.
Zoom will not
Focus mode is set on
work
Super Macro
Even though
A long time has elapsed
you have put in since the batteries were
a new battery, removed previously.
[Battery
depleted]
appears.
Remedy
Subjects are difficult to focus on using
autofocus: objects with little contrast (blue
sky, white walls, etc.), dark objects, finely
patterned objects, fast-moving objects,
scenery through window or net, etc. Lock
focus on another object located at same
distance (press shutter release button
halfway), then aim at target and press
shutter release button fully, or use Manual
Focus mode.
Position subject in focus frame (focusing
area) in middle of LCD monitor. If the
subject is outside the focusing area, aim
the camera at the subject and lock the
focus (press shutter release button
halfway), then compose picture and press
the shutter release button fully.
Set focus mode on q (Macro) or
r (Super Macro). (p.65)
Normal pictures will be out of focus if
taken with focus mode set on q (Macro)
or r (Super Macro).
Set to Auto or b. (p.67)
Flash will not discharge in these modes.
135
Main Specifications
Type
Effective Pixels
Sensor
Recorded Pixels
Sensitivity
File Format
Quality Level
Storage Medium
Fully automatic compact digital still camera with built-in zoom lens
5.0 megapixels
5.36 megapixels (total pixels), 1/2.5-inch interline transfer CCD with a
primary color filter
Still Picture
2560×1920 pixels, 2304×1728 pixels, 2048×1536 pixels,
1600×1200 pixels, 1024×768 pixels, 640×480 pixels
Movie
320×240 pixels
Auto, manual (50, 100, 200, 400: Standard Output Sensitivity)
Still Picture
JPEG (Exif2.2), DCF, DPOF, Print Image Matching III
Movie
AVI (Motion JPEG), approx. 30 fps, approx. 15 fps with
sound (monaural) *fps = frames per second
Sound
WAV (PCM system), monaural, max. recording time
approx. 15 min. (when using 16 MB SD Memory Card)
C (Best), D (Better), E(Good)
(In Auto Select Mode)
2560×1920: C (Superior), 2560×1920: D (Super)
2048×1536: D (Normal), 640×480: D (Economy)
Built-in memory (approx. 11 MB), SD Memory Card
Approximate Image Storage Capacity (when using the built-in memory (11MB))
Quality Level
Recorded Pixels
2560×1920
2304×1728
2048×1536
1600×1200
1024×7680
640×480
8
Appendix
136
C
Best
D
Better
E
Good
3
4
5
8
19
44
6
8
9
15
36
69
10
12
14
21
48
92
Movie
(320×240)
Sound
49 sec. (15 fps)
11 min.
25 sec. (30 fps)
Approximate Image Storage Capacity (when using the SD memory card (128MB))
Quality Level
Recorded Pixels
2560×1920
2304×1728
2048×1536
1600×1200
1024×7680
640×480
C
Best
D
Better
E
Good
38
49
62
104
227
500
77
96
113
178
417
782
124
138
166
250
554
1043
Movie
(320×240)
Sound
9 min. 12 sec.
(15 fps)
2 h. 13 min.
4 min. 45 sec.
(30 fps)
White Balance
Lens
Digital Zoom
LCD Monitor
Playback Functions
Focusing System
Manual Focus
Exposure Mechanism
Movie
Capture Modes
Shutter
Drive Modes
Self-Timer
Time Function
Remote Control Unit
Power Supply
8
Appendix
Flash
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual
Focal Length
5.8 mm - 17.4 mm (equivalent to 35.6 mm - 107 mm
in 35 mm format)
Maximum Aperture
f/2.6 - f/4.8
Lens Composition
6 elements in 5 groups (two aspherical elements)
Zoom Type
Electrically driven
Picture Range
approx. 38.6 mm - approx. 28.9 mm
(screen is filled)
(Super Macro mode)
Lens Cover
Electrically driven
Capture Mode
Max approx. 2.6× (combines with 3× optical zoom to
give zoom magnification equivalent to 8×)
2.5-inch TFT color LCD (with backlight) with approx. 115 kilopixels monitor,
frame coverage approx. 100%
Single-frame, 9-frame index, zoom playback (max up to 12x, scroll possible),
rotating (still images only), movie playback, audio playback, voice memo
playback, histogram display
Slideshow playback, resizing, protect, digital filter and copy (built-in
memoryQmedia), DPOF functions are on the menu.
Digital filter (black-and-white, sepia, red, green, blue, black-and-white + red,
black-and-white + green, black-and-white + blue, soft, illustration 1, illustration
2, illustration 3, illustration 4, illustration 5, special effect 1, special effect 2.)
Type
TTL contrast detection system by sensor
5-point multi autofocus (spot autofocus possible)
Still image/movie
Normal: 0.4 m - ∞ (full zoom range)
Macro: 0.18 m - 0.5 m (full zoom range)
focusing range
Super Macro: 0.06 m - 0.2 m (focal length 10.2 mm)
(from lens front)
Landscape: ∞ (full zoom range)
Focus Lock
By half-pressing shutter release button
0.18 m - ∞ (0.06 m - ∞ around the focal length midpoint)
AE Metering
TTL metering by sensor (multi-segment,
center-weighted, spot)
EV Compensation
±2 EV (can be set in 1/3 EV steps)
Recording time approx. 1 sec. - until memory card is full
9 positions (Auto Select, Portrait, Landscape, Night-Scene, Movie, Voice
Recording, Digital Effect, Program, Picture)
Type
Electronic/mechanical shutter
Speed
Approx. 1/2000 sec. - 4 sec.
Type
Auto flash with red-eye reduction function
Flash Modes
Auto, flash off, flash on, auto flash + red-eye
reduction, flash on + red-eye reduction
Effective Range
Wide: approx. 0.2 m - approx. 4.9 m
(For standard output sensitivity of 400)
Tele: approx. 0.2 m - approx. 2.8 m
(For standard output sensitivity of 400)
Single-frame, self-timer mode (10 sec/2 sec), continuous mode, remote
control mode (shooting after 3 sec/instant shooting)
Electronic control type, delay time: approx. 10 sec., 2 sec.
World Time setting for 62 cities (28 time zones)
Remote control E, F (sold separately)
Both instant shutter release and release after a 3-second delay are
possible.
Zoom function is available with Remote control E
Two AA batteries (alkaline, lithium, nickel manganese, Ni-MH
Rechargeable battery), one lithium battery CR-V3, AC adapter (optional)
137
Battery Life
Recording still images: Approximately 370 images or less (when using the
CR-V3 lithium battery) *1
Playback still images: Approximately 450 minutes or less (when using the
CR-V3 lithium battery) *2
*1 The image storage capacity is a guideline based on CIPA standard
measurement conditions, and may vary depending on actual shooting
conditions of use. (Measuring conditions: LCD monitor is on, 50% flash
use, 23°C.)
*2 The playback times are a guideline based on PENTAX measuring
conditions and may vary depending on the actual shooting conditions of
use.
In/Out Port
USB/AV terminal, external power supply terminal
Video Output Format
NTSC/PAL (Monaural)
PictBridge
Compatible printers Printers that support PictBridge
Print Modes
Print One Print All Print with DPOF Settings
89 (W) × 58.5 (H) × 27.5 (D) mm (excluding operating members and projections)
Size
Weight
135 g (4.6 oz) (excluding batteries and SD Memory Card)
Weight When Shooting 185 g (6.3 oz) (including batteries and SD Memory Card)
Accessories
Two AA alkaline batteries, USB cable, software (CD-ROM), AV cable,
strap, operating manual
8
Appendix
138
Memo
8
Appendix
139
WARRANTY POLICY
All PENTAX cameras purchased through authorized bona fide photographic
distribution channels are guaranteed against defects of material or workmanship
for a period of twelve months from date of purchase. Service will be rendered, and
defective parts will be replaced without cost to you within that period, provided the
equipment does not show evidence of impact, sand or liquid damage,
mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The
manufacturer or its authorized representatives shall not be liable for any repair or
alterations except those made with its written consent and shall not be liable for
damages from delay or loss of use or from other indirect or consequential
damages of any kind, whether caused by defective material or workmanship or
otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or
implied, is strictly limited to the replacement of parts as hereinbefore provided. No
refunds will be made on repairs by non-authorized PENTAX service facilities.
8
Appendix
140
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should
be returned to the dealer from whom you purchased the equipment or to the
manufacturer. If there is no representative of the manufacturer in your country,
send the equipment to the manufacturer, with postage prepaid. In this case, it will
take a considerable length of time before the equipment can be returned to you
owing to the complicated customs procedures required. If the equipment is
covered by warranty, repairs will be made and parts replaced free of charge, and
the equipment will be returned to you upon completion of servicing. If the
equipment is not covered by warranty, regular charges of the manufacturer or of
its representatives will apply. Shipping charges are to be borne by the owner. If
your PENTAX was purchased outside of the country where you wish to have it
serviced during the warranty period, regular handling and servicing fees may be
charged by the manufacturer’s representatives in that country. Notwithstanding
this, your PENTAX returned to the manufacturer will be serviced free of charge
according to this procedure and warranty policy. In any case, however, shipping
charges and customs clearance fees to be borne by the sender. To prove the date
of your purchase when required, please keep the receipt or bills covering the
purchase of your equipment for at least a year. Before sending your equipment
for servicing, please make sure that you are sending it to the manufacturer's
authorized representatives or their approved repair shops, unless you are
sending it directly to the manufacturer. Always obtain a quotation for the service
charge, and only after you accept the quoted service charge, instruct the service
station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some
countries can supersede this warranty policy. Therefore, we recommend
that you review the warranty card supplied with your product at the time
of purchase, or contact the PENTAX distributor in your country for more
information and to receive a copy of the warranty policy.
8
Appendix
The CE Mark is a Directive conformity mark of the European
Community.
141
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
8
Appendix
142
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Pour les utilisateurs au Canada
Cet apareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
Pentax Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 th Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein
complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed is identical to the representative unit
tested and found to be compliant with the standards. Records
maintained continue to reflect the equipment being produced can be
expected to be within the variation accepted, due to quantity production
and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation. The above named party is responsible for ensuring that the
equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: Optio S55
Contact person: Customer Service Manager
Date and Place: June 2005, Colorado
Memo
Memo
PENTAX Corporation
2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/)
PENTAX Europe GmbH (European Headquarters)
Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX France S.A.S.
12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex, FRANCE
PENTAX Benelux B.V.
(for Netherlands)
Spinveld 25, 4815 HR Breda, NETHERLANDS
(http://www.pentax.nl)
(for Belgium & Luxembourg)
Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
(http://www.pentax.be)
PENTAX (Schweiz) AG
Widenholzstrasse 1 Postfach 367 8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX Imaging Company
A Division of PENTAX of America,Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(Distribution & Service Center)
16163 West 45th Drive, Unit H Golden, Colorado 80403, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA
(http://www.pentaxcanada.ca)
http://www.pentax.co.jp/english
• Specifications and external dimensions are subject to change without notice.
57506
Copyright © PENTAX Corporation 2005
01-200505 Printed in the Philippines
">