1
Setup Instructions to extent your WIFI Signal with
Tenda A5 Router
Step 1: write on a paper your existing wifi network setting. (see example below)
Security type: wpa2-personal
Encryption type: AES
Network security key (for this example key is sgdsYtd2)
Step 2: Access your Tenda Router Settings
Plug in the wall your Tenda Router.
Connect to network tenda_4fxxxx with wifikey 12345678
Open your web browser and run http://192.168.2.1/ and press Enter.
In the Login Screen Enter "admin" and click ok
2
Select Connection type select DHCP (If it's not already selected)
Click Advance settings and you will see the following screen
Click WAN medium type
Click Open Scan and select your existing network provider SSID
Click Ok
Set the same setting as your existing wifi network. See step 1 photo.
Security Mode: WPA2-PSK (for this example Security Mode is WPA2-PSK) (here goes your existing wifi network Security Type) PSK=Personal
WPA Algorithms: AES (for this example WPA Algorithm is AES) (here goes your existing wifi network Encryption Type)
Key: xxxxxxx (for this example key is sgdsYtd2) (here goes your existing wifi network key)
Click ok
Your router will restart, and now you can connect to the internet through your new wifi network Tenda. Finish.
