advertisement
◉
Touch to zoom
RJ11 Connector
RJ11 Connector for RS232 Communication
Pin
1
2
3
4
5
6
Applied To:
Stepper Drive:
DM432C, DM442，DM556, DM856, 3DM683, AM882, DM1182, DM2282
Servo Drive:
DCS810, DCS810S, ACS306, ACS606, ACS806
Signal
NC
+5V
TxD
GND
RxD
NC
-
+5V power only for STU, left it unconnected when connect to a PC serial port
RS232 transmit.
Ground.
RS232 receive.
-
Description I/O
-
O
O
GND
I
-
2. Cable connections to a PC serial port (Male DB9)
advertisement
Key Features
- Supports both stepper and servo drives
- RJ11 connector for easy connection to drives
- DB9 connector for connection to PC serial port
- Provides +5V power for STU
- Supports RS232 communication protocol
- User-friendly interface for easy configuration and monitoring
Related manuals
Frequently Answers and Questions
What drives are supported by Leadshine RS232 Communication?
It supports a range of Leadshine stepper drives (DM432C, DM442, DM556, DM856, 3DM683, AM882, DM1182, DM2282) and servo drives (DCS810, DCS810S, ACS306, ACS606, ACS806).
How do I connect Leadshine RS232 Communication to my drive?
Use an RJ11 cable to connect the RJ11 connector on Leadshine RS232 Communication to the corresponding port on your drive.
How do I connect Leadshine RS232 Communication to my PC?
Use a DB9 cable to connect the DB9 connector on Leadshine RS232 Communication to the serial port on your PC.
advertisement