Philips 26PF4311S 26" LCD HD Ready widescreen flat TV 26" Silver Frost Specification
Add to My manuals
21 Pages
advertisement
26PF4311S
32PF4311S
Introduction
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV set.
We strongly recommend that you read it thoroughly.
Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Preparation / Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Television keys and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control keys (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programme sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Naming of channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Picture and Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the Contrast+ and NR (Noise Reduction) features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the PIP (Picture-in-Picture) feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Screen Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the Smart Picture and Sound features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the Active Control feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the TV as PC monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the TV in HD (High Definition) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reference table of Countries available for selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Recycling
The packaging of this product is intended to be recycled. Apply to the local authorities for correct disposal.
Disposal of your old product
Your product is designed and manufactured with highly quality material and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2002/976/EC.
Please inform yourself about the local seperate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your product will help prevent potential negative consequences for the environment and human health.
GB
1
Safety Information
10 cm
10 cm
10 cm
X
Leave at least 10 cm around each side of the
TV set to allow for proper ventilation. Place the set on a stable, level surface. Never cover the ventilation slots of the TV with a cloth or other material. It may cause overheating. Do not insert anything in the ventilation holes. If metal or something flammable is inserted in these holes, it may result in fire or electric shock.
When cleaning the surface or the screen of the set, wipe gently with absorbent cotton or cloth or other soft material like chamois. Do not use too wet a cloth which is dripping with water.
Do not use acetone, toulene or alcohol to clean the TV. As a safety precaution, unplug the power cord from the mains.
X
X
Take care not to connect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock.
X
Pull the power lead by the plug. Do not pull on the power lead. Do not use a poor fitting mains socket. Insert the plug fully into the mains. If it is loose, it may cause arching and result in fire.
X
To prevent fire or shock hazard, do not expose your TV to rain or moisture.
No naked flame sources (lighted candles) should be placed on the top of the set or near it.
X
Avoid placing your TV set under direct sunlight or heat.
As a safety precaution, do not touch any part of the TV, power lead or aerial lead during lightning storms.
X
2
Installation of the TV set on the wall should be carried out by qualified serviceman. Improper and incorrect installation may render the set unsafe.
Avoid placing vase filled with water on the TV.
Water spilled into the set could result in electric shock. Do not operate set if water is spilled into it. Have it checked immediately by a qualified serviceman.
Preparation / Getting started
1 Positioning the TV set
10 cm
10 cm 10 cm
Place your TV set on a solid stable surface, leaving a space of at 10 cm around the set.
Pull out the plastic insulation sheet from the
battery to enable the remote control to operate.
4 Switching on the TV set
2 Connections
26”/32”
• Insert the aerial plug into the 75Ω : socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
• To switch on the TV set, press the POWER
button. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the PROGRAM – / + key on
the keyboard or the P – / + key on the
remote control.
NOTE
For more details on other connections, see
“CONNECTION GUIDE”.
3
4
3
Televison keys and connectors
2
11
Headphone
Audio In
Video In
S-Video
R
AUDIO
IN
L
VIDEO
IN
S-VIDEO
EXT3/SVHS3
1
5
AC in ~
6 7
L
AUDIO R L
IN
EXT 4
Pr Pb Y
HDMI 2
R
DVI
(AUDIO IN)
HDMI 1
EXT 2 /SVHS2 EXT 1
8 9 10
1 POWER . : to switch the TV on and off.
Note : The power remains on even when the
Power switch is turned off.
2 VOLUME –/+: to adjust sound level.
3 MENU : to access or close menus.
The PROGRAM /CHANNEL –/+ keys can
be used to select a menu item and the
VOLUME –/+ keys to enter into the selected
menu item and make adjustments.
4 PROGRAM / CHANNEL –/+ : to select
8 HDMI 1 /HDMI 2 sockets : to connect to
set-top boxes, DVD player/recorder, High
Definition equipment or Personal Computer.
9 EXT1 and EXT2/SVHS2 sockets : connect to
equipment like DVD player/recorder, VCR,
Decorder which have scart connections.
10 TV Aerial socket : Insert the aerial plug into
the 75 Ω : socket .
11 Side connections : for connecting to devices
like camera or camcorder. Also allows you to
connect your headphone for your personal
listening pleasure.
4
5 POWER socket : Insert the mains plug into
a wall socket.
6 DVI Audio Input : for connecting a HD (high
definition) equipment or computer with DVI
output.
7 Component Video inputs / Audio Inputs :
to connect to equipment like DVD, Set-Top
box which have the same sockets. Connect the
audio inputs of the TV to the outputs of the
device together with the Component Video
Inputs.
NOTE
For more details on connections, see CONNECTION GUIDE.
Remote Control keys
4
5
6
7
8
3
1
2
9
10
11
12
13
14
AUX 15
16
17
18
19
20
21
22
23
1 Standby
To set the TV to standby mode. To switch the
TV set on again, press , to ,
P – / + or AV key.
2 Unused key in TV mode .
3 DVD / AUX (see page 6).
4 Surround Sound
To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround, you can
experience Dolby Surround Pro Logic sound effects.
5 Telextext keys (see page 14).
6 AV
To display Source List to select TV or peripheral equipment connected to EXT 1, EXT 2/SVHS2,
EXT 3/SVHS3, EXT 4, HDMI 1 or HDMI 2.
7 Active Control
(
See page 13).
8 MENU
To call up or exit the TV menus.
9 Cursors
These 4 keys are used for selection and adjustment of menu items.
10 OK
Confirms selection.
11 Volume ( – VOL + )
To adjust the sound level.
12 Smart Picture /Sound
Used to access a series of predefined picture and sound settings (see page 13).
13 / Numerical keys
For direct access to programmes. For a 2 digit programme number, the 2 nd digit must be entered before the dash disappears.
14 Screen information
To display/remove the programme number, the sound mode, the remaining time of the sleeptimer and the *signal strength indicator.
Press key for more than 5 seconds to display information permanently on screen and press key again for more than 5 seconds to remove information.
15 Mode
Select between TV, DVD and AUX mode (see
“Remote Control - DVD or AUX on page 6).
16 Programme List
To display / clear the list of programmes.
Use the Î ï keys to select a programme and the Æ key to display it.
17 Picture-in-Picture
To display a PIP window on the TV screen (see page 10 on how to use the PIP feature).
18 Sound mode
Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between
Dualå or Dual». The Mono indication is red when in forced position.
19 Screen Format (see page 12).
20 DVD / AUX (see page 6).
21 Mute
Press to mute or restore sound.
22 Selecting TV programmes (P – / +)
To select the next or previous programme.
The number and the sound mode are displayed for a few seconds. For some
TV programmes, the title of the programme appears at the bottom of the screen.
23 Previous/Present programme
To alternate between the last viewed and present programme.
* The signal strength indicator shows
the signal strength of the transmission
of the programme you are watching.
5
6
Remote Control keys (DVD or AUX)
The remote control also allows you to control the main functions of some Philips DVD models
NOTE : Functions not available to Philips DVD-R device.
Press the key to select the required mode: DVD or AUX.
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle. The mode automatically returns to TV mode.
The following buttons are operational, depending on the equipment: standby pause fast rewind stop play fast forward record to display and exit menu programme selection navigation and adjustments, confirms selection digit keys
Quick Installation
When you switch on the TV set for the first time, a menu is displayed on screen.
This menu prompts you to select the country and language for the menus.
Plug’n’Play
Country
GB
Language
English
The search starts automatically. All the available TV programmes will be stored. This operation takes a few minutes. The display shows the progress of the search and the number of programmes found.
Important : To exit or interrupt the search before it is completed, press the key.
If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again.
Note
If the above menu is not displayed, proceed to do the installation of channels by the
Auto Store method (see page 7). If above menu is displayed, proceed to do the following steps.
& Use the Î ï keys on the remote control
to select your country. If your country does not appear in the list, select “. . . “ . Refer to the
“Reference table of Countries available for selection” on page 19
é Use the Æ key to move to the Language mode and select your language by the Î ï keys.
“ Use the Æ key to start search.
Note
ATS (Automatic Tuning System) feature
If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. In this case, the installation is complete. If this is not the case, you need to use the Sort menu to number the programmes correctly.
ACI (Automatic Channel Installation) feature
If a cable system or a TV channel which broadcasts ACI is detected, a programme list appears. Without ACI broadcast, the channels are numbered according to your language and country selection. You can use the Sort menu to renumber them.
Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this
case, indicate your choice using the Î ï keys and
confirm with Æ key.
Program Sort
1 Press the key. The TV Menu is displayed on the screen.
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
Æ
• 0
Æ
• 1
Æ
• 2
Æ
• 3
Æ
• 4
Æ
• 5
2 Use the ï key, select the Install menu and the Æ / key to enter the
Install menu.
3
4
5
6
7
Use the ï key to select Sort and the
Æ / key to enter sort mode.
Select the programme number you want to move using the Î ï keys and the Æ / key to enter sorting mode (The arrow cursor now points to the left).
Use the Î ï keys to select the new programme number and confirm with the
Í / key. (The arrow points to the right and sorting is completed).
4 5 programme number you wish to re-number.
To return to previous menu, press the
key.
8 To exit the menu, press the key.
Auto Store
1
2
Press the key.
Using the ï key, select Install and the
Æ / key to enter the Install menu
(Language is highlighted).
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Æ
Æ
Auto Store
Manual Store
Sort
Name
Æ
Æ
Æ
Search
3 Before you proceed to do auto store of channels, select your desired menu
*Language with the Í Æ keys.
* Selecting the language
If you have selected the wrong language for one reason or another and do not understand the language to operate the set, do the following to bring you back to your preferred language :
key to exit the existing – press the
menu.
– press the key to enter the TV menu.
4 Select Country with the ï key and use the Í Æ keys to select the country of your choice.
5
6
Using the ï key, select Auto Store and the Æ / key to start automatic searching of the channels. All the available TV programmes will be stored. This operation takes a few minutes. The display shows the progress of the search and the number of programmes found.
After the search is completed, press the
key to exit menu.
Important : To exit or interrupt the search before it is completed, press the key.
If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again.
– press the ï key repeatedly until the
FOURTH item in the TV menu is
highlighted.
– press the Æ / key to go into the Install
menu.
– press the Í Æ keys to select your preferred
language (the menu will now appear in the
chosen language). You can proceed to install
the TV channels automatically.
7
8
1
2
3
4
Manual Store
This menu is used to store the programmes one at a time.
Press the key.
With the ï key, select Install and the
Æ / key to enter the Install menu.
Use the ï key to select Manual Store and the Æ / key to enter Manual Store menu.
Use the Î ï keys to select the items in the
Manual Store menu to adjust or activate.
TV Menu
Picture
Sound
Features
Install
Manual Store
System
Search
Æ
Program No.
Fine Tune
Store
Æ
Æ
Æ
Europe
5 System : Use the Í Æ keys to select
Europe (automatic detection*),
France (LL’ standard) or
UK (I standard),
West Europe (BG standard),
East Europe (DK standard). or
* Except for France (LL’ standard), you must
select France.
Naming of Channel
You can give a name to the TV channel.
2
Press the key.
1
With the ï key, select Install and the
Æ / key to enter the Install menu.
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
Æ
Æ
Æ
Æ
Æ
Æ 8
6
7
8
Search :
Press the Æ / key. The search starts.
Once a programme is found, the scanning stops and its name is displayed (if available).
Go to the next step. If you know the frequency of the required programme, this can be entered directly using the to
keys.
If no picture is found, see “Troubleshooting Tips” on page 17 and 18..
Program No. :
Enter the required number with the
to or Í Æ keys.
Fine Tune :
If the reception is not satisfactory, adjust using the Í Æ keys.
9 Store :
To store the changes, press Æ /
The programme is now stored.
key .
10 Repeat steps 6 to 9 for each programme to be stored.
11 To return to previous menu, press the
key.
12 To exit the menu, press the key.
3 Use the ï key to select Name and the Æ / key to enter name mode.
4 Use the Î ï keys to select the programme you want to name and the Æ / enter naming mode.
key to
5
Use the Î ï keys to select the characters and use the Í Æ keys to move around the name display area (maximum of 5 characters).
6 Press Í Æ / key until the name appears at the top right hand corner of the
TV screen. The name is now stored.
7 To exit the menu, press the key.
Picture and Sound Settings
1 Press the key.
2
3
Use the Î ï keys to select Picture or
Sound.
Use the Í Æ / keys to enter
Picture or Sound menu.
TV Menu
Picture
Sound
Features
Install
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39
TV Menu
Picture
Sound
Features
Install
Sound
Equalizer
Æ
Balance
Æ
Delta Voliume
Æ
AVL
Æ
Dolby Virtual
Æ
Store
Æ
• 120 Hz
• 500 Hz
• 1500 Hz
• 5 KHz
• 10 KHz
4 Use the Î ï keys to select a Picture or
Sound setting and the Í Æ keys to adjust.
5 To return to previous menu, press the
key.
6 To exit the menu, press the key.
Description of the Picture settings
Brightness : this changes picture brilliance.
Colour : this changes the intensity of the colour.
Contrast : this changes the difference between the light and dark tones.
Sharpness : this increases or decreases the sharpness level to improve details in the picture.
Colour Temp. : this changes the colour rendering: Cool (bluer), Normal (balanced) or
Warm (redder).
Store : to store the picture adjustments and settings.
Description of the Sound settings
Equalizer : to adjust the sound tone (from bass:
120 Hz to treble : 10 KHz).
Balance : this balances the sound on the left and right speakers.
Delta Volume : this is used to compensate any volume differences between the different programmes or EXT sockets. Note : Programmes
0 to 40 have individual volume setting and programmes 41 and above share common setting.
AVL (Automatic Volume Leveller) : this is used to limit sudden increases in sound, especially on programme change or advertising slots.
Dolby Virtual : To activate / deactivate the surround sound effect.
You can also access these settings with the key.
Store : this is used to store the sound settings.
9
10
Using the Contrast+ and NR (Noise Reduction) features
1 Press the key.
2
With the ï key, select Features and the
Æ / key to enter the Features menu.
3 Use the Î ï keys to select Contrast+ or
NR (Noise Reduction) and the Í Æ keys to select an On or Off option.
4 To return to previous menu, press the
key.
Definition of the feature settings
Contrast+ :
– optimise the total contrast of the picture for
improved picture visibility.
– select On option to activate feature.
NR (Noise Reduction) :
– improves “noisy” picture (little dots on picture)
due to weak signal transmission.
– select On option to activate feature.
5 To exit the menu, press the key.
Timer function
This menu lets you use the TV set as an alarm.
&
Press the key.
é
With the cursor, select the Features menu then Timer :
“
Sleep: to select an automatic standby period.
TV Menu
Picture
Sound
Features
Install
Timer
Sleep
Time
Æ
Start Time
Stop Time
Program No.
Activate
Æ
Æ
Æ
Æ
10:56
‘
Time: enter the current time.
Note: the time is updated automatically each time the TV set is switched on via the teletext information on programme 1. If this programme does not have teletext, the update will not take place.
(
Start Time: enter the start time.
§
Stop Time: enter the standby time.
è
Program No.: enter the number of the programme for the wake-up alarm.
!
Activate: the settings include:
• Once for a single alarm,
• Daily for each day,
• Off to cancel.
ç
Press to put the TV set in standby.
It will automatically come on at the time programmed.
If you leave the TV set on, it will just change programmes at the time entered (and will go to standby mode at the Stop Time).
Using the PIP (Picture-in-Picture) feature
The PIP (Picture-in-Picture) feature allows you to call up a PIP screen of the PC (Personal
Computer) or HD (High Defintion) device while watching a TV programme.
IMPORTANT
To call up a PIP screen of the PC equipment,
the following step must be taken :
“
Use the Î ï keys to select PIP
‘
Use the Æ / key to enter PIP menu.
PIP
PIP Size
Horizontal
Æ
Æ
Vertical
HDMI
Æ
Æ
Off
HDMI 1 or HDMI 2 input MUST be connected
to the DVI output of the PC equipment. Use a
HDMI/DVI cable to do the connection.
To call up a PIP screen of the HD equipment,
the following steps must be taken :
(
Use the Î ï keys to select PIP menu items.
§
Use the Í Æ Î ï keys to access the PIP menu items, make the following adjustments or options.
§
To exit the PIP screen, select PIP Size.
followed by the Off option.
HDMI 1 or HDMI 2 input MUST be connected
to the HDMI output of the HD equipment.
Definitions of PIP items
NOTE
•
While you are watching TV programmes, you
can only call up a PIP screen from only one
source.
• Go to the PIP menu and select HDMI. See
below on how to access the PIP menu.
• Select HDMI 1 or HDMI 2 depending on
connection.
PIP
PIP Size
Æ
Horizontal
Vertical
HDMI
Æ
Æ
Æ
PIP
HDMI-1
PIP Size
Æ
Horizontal
Vertical
HDMI
Æ
Æ
Æ
HDMI-2
PIP Size : Select your PIP size (Off, Small,
Medium, Large and Side-by-
Side).
Horizontal : Move the PIP screen horizontally
from left to right and vice-versa.
Vertical : Move the PIP screen vertically
from top to bottom and vice-versa.
HDMI : If HDMI 1 or HDMI 2 are both
connected, you can only select
one source, HDMI 1 or HDMI 2.
Accessing the PIP screen via the PIP key
Accessing the PIP screen via the PIP menu
Note : This is only possible when PIP signal is detected.
&
Press the key to display main menu.
é
With the Î ï key, select Features and
the Æ /
menu.
key to enter the Features
TV Menu
Picture
Sound
Features
Install
Features
Timer
Æ
Contrast+
NR
PIP
Æ
Æ
Æ
• PIP Size
• Horizontal
• Vertical
• HDMI
Note : This is only possible when PIP signal is detected.
&
Press the key on the remote control to display PIP screen. A small PIP screen will appear on the TV screen.
é
Press the key a second time to change
the small PIP screen to a medium PIP screen
size.
“
Press the key a third time to change the
medium PIP screen to large PIP screen size.
‘
Press the key a fourth time to change
the large PIP screen to a Side-by-Side (a TV
screen on one side and the PIP screen on the
other side).
(
Press the key a fifth time exit PIP screen.
NOTE
For more details on connections to the PC and HD equipment, see
CONNECTION GUIDE.
11
12
Screen Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the left and right of the screen. This function allows you to optimise the picture display on screen.
Press the key (or Í Æ) to select the different modes. This TV set is also equipped with automatic turning which will select the correct-screen format, provided the specific signals are transmitted with the programmes.
4:3
The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture.
Movie expand 14:9
The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture.
Movie expand 16:9
The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures which have black bands at the top and bottom
(letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the screen leaving the sub-titles visible.
Superzoom
This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture.
Widescreen
The picture is displayed in the correct proportions of images transmitted in 16:9.
Note: If you display a 4:3 picture in this mode, it will be enlarged horizontally.
Using the Smart Picture and Sound features
Smart Picture feature offers you a choice of 5 picture settings namely : Rich, Natural, Soft,
Multimedia and Personal.
Press the button repeatedly to cycle through the settings to select your desired mode.
Rich or
Natural
Soft
Multimedia
Personal
Definition of Picture Settings
Rich : Brilliant and sharp picture settings
suitable for bright environment and
for use in demonstrations to show
off the quality of the TV on good
sources.
Natural : Reference mode for living room
conditions and average signals.
Soft : Intended for bad-quality signals.
Suitable for living room viewing.
Multimedia : Best for graphical applications.
Personal : Pictures settings are set to your
preference.
Smart Sound feature offers you a choice of 4 sound settings namely : Theatre, Music, Voice, and Personal.
Press the button repeatedly to cycle through the settings to select your desired mode.
Theatre or
Music
Voice
Personal
Definition of Sound Settings
Theatre : Emphasize sensation to action (Bass
and Treble boosted).
Music : Emphasize low tone (Bass boosted).
Voice : Emphasize high tone (Treble boosted).
Personal : Sound settings are set to your
preference.
NOTE : The Personal setting is the setting that you set up using the Picture/Sound menu in the main menu. This is the only setting in the Smart
Picture/Sound settings that can be changed. All other settings are pre-set at the factory.
Using the Active Control feature
Active Control feature automatically adjusts the picture setting for optimal picture quality continuously under any signal conditions.
&
Press the key repeatedly to toggle
between Active Control Off and Active
Control On options.
é
Select the Active Control On option to
activate the Active Control feature.
“
Select the Active Control Off option to
deactivate the Active Control feature.
Active Control Off
Active Control On
13
14
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like a newspaper.
It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.).
AUX
3
6
5
1
2
2
1
2
3
Teletext call
Selecting a page
Direct access to the items
This is used to switch on or off teletext display. The summary appears with a list of items that can be accessed.
Each item has a corresponding 3 digit page number. If channel selected does not broadcast teletext, the indication 100 will be displayed and the screen will remain blank. Proceed to exit teletext and select another channel.
Enter the number of the page required using the 0 to 9 keys or P –/+ keys. Example: page 120, enter 120. The number is displayed at the top left corner of the screen.
When the page is located, the counter stops searching.
Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number.
Coloured areas are displayed at the bottom of the screen. The 4 colour keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available.
4 4 Contents
5 Sub-page display
This returns you to the contents page (usually page 100).
AUX
9
7
9
6
7
Double page teletext
Hidden information
Certain pages contain sub-pages which are automatically displayed successively. Press the key to hold subpage and press the key a second time to resume. Use the
Í Æ keys to select previous or next sub-page.
To activate or deactivate the double page teletext display mode. The active page is displayed on the left and the following page is displayed on the right. Press if you want to hold a page (i.e. the contents page). The active page is then displayed on the right. To return to normal mode, press the key.
To display or hide the concealed information (games solutions).
8
2
8
Enlarge a page This allows you to display the top or bottom part of the page. Pressing it again will return the page to normal size.
9
9
9 Favourite pages Instead of the standard coloured areas displayed at the bottom of the screen, you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys (red, green, yellow, blue). Once set, these favourite pages will become the default every time teletext is selected.
1. Press the pages mode.
key to change to favourite
2. Use the / keys to enter the teletext page that you want to store as a favourite page.
3. Press and hold the colour key of your choice for about 5 seconds. The page is now stored.
4. Repeat steps 2 to 3 with the other coloured keys.
5. To exit favourite page mode, press the key.
6. To exit teletext mode, press the key.
NOTE : To clear favourite pages, press and hold
key for about 5 seconds.
Using the TV as a PC Monitor
Your TV can be used as a computer monitor.
IMPORTANT
For the TV to function as PC monitor, the following steps must be taken :
&
HDMI 1 or HDMI 2 input MUST be
connected to the DVI output of the PC.
Use a DVI to HDMI adaptor to do the
connection.
é
Press the key to display Source List and use the Î ï key to select HDMI 1 or HDMI 2 .
Use the Æ / key to switch to the selected
source.
Description of Features
Format :
– Chooses between full screen or native format of
the PC screen.
PIP (Picture-in Picture) :
– Displays a PIP screen to watch TV programmes
at the same time.
Using the PIP feature
The PIP (Picture-in-Picture) feature allows you to call up a PIP screen of a TV programme while you are in PC mode.
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Æ
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Using the PC menus
Æ
IMPORTANT
To call up a PIP screen of the TV programme, the following step must be taken :
HDMI 1 or HDMI 2 input MUST be connected
to the DVI output of the PC equipment. Use a HDMI
to DVI adaptor cable to do the connection.
The PIP menu items : PIP Size, Horizontal and Vertical works in exactly the same way as when calling a PIP screen in TV mode. Except for
HDMI, there is no selection for other source.
Press the key to display the PC menu.
Use the Î ï key to access the settings
and the Í Æ / key to select or adjust setting (the settings are automatically saved).
PIP
PIP Size
Horizontal
Vertical
HDMI
Æ
Æ
Æ
Æ
Description Picture settings
Brightness / Contrast :
– Adjusts the brightness and contrast.
Colour Temp :
– Changes the colour rendering : Cool (bluer),
Normal (balance) or Warm (redder).
Audio Selection :
– Chooses the audio from the TV or PC/HD.
HDMI
Í
No Selection
For description of PIP menu items and how it works, refer to the section on “Using the PIP
(Picture-in Picture) Feature” page 11.
NOTE
For more details on connection to the PC equipment, see
CONNECTION GUIDE.
Supported PC Resolutions
640 x 480, 60 Hz
640 x 480, 67 Hz
640 x 480, 72 Hz
640 x 480, 75 Hz
800 x 600, 56 Hz
800 x 600, 60 Hz
800 x 600, 72 Hz
800 x 600, 75 Hz
1024 x 768, 60 Hz
1024 x 768, 70 Hz
1024 x 768, 75 Hz
15
16
Using the TV in HD (High Definition) Mode
HD Mode
The HD (High Definition) mode allows you to enjoy clearer and sharper pictures if you are using a HD equipment that can transmit high definition programming.
IMPORTANT
For the TV to function in HD mode, the following steps must be taken :
& HDMI 1 or HDMI 2 input MUST be
connected to the HDMI/DVI output of the HD
equipment . Use a HDMI to DVI adaptor if DVI
is connected. For more information, refer
to Connection Guide.
é Press the key to display Source List
and use the Î ï key to select HDMI 1 or
HDMI 2 .
“ Use the Æ / key to switch to the selected
source.
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Æ
Source
TV
EXT 1
EXT 2 / SVHS2
EXT 3 / SVHS3
EXT 4
HDMI 1
HDMI 2
Æ
HD Features
Timer : Functions of the Sleeptimer and Timer are the same as the TV Sleeptimer and Timer functions and work in exactly the same way as the
TV Sleeptimer and Timer functions (see page 10).
PIP : Display a PIP screen to watch TV programmes at the same time. The PIP menu items : PIP Size, Horizontal and Vertical work in exactly the same way as when calling a PIP screen in TV mode.
For description of PIP menu items and how it works, refer to the section on “Using the PIP
(Picture-in Picture) Feature” page 11.
* Horizontal Shift : Adjust the horizontal position of the image.
* Mode Selection : When you connect PC or
HD equipment supporting resolutions of 480p,
576p or 720p, the Mode Selection in the
Features menu will be highlighted. This will allow you to select between the PC and HD mode.
If it does not support the 480p, 576p or 720p resolutions, you cannot access this function.
Features
Timer
Contrast+
NR
PIP
Horizontal Shift
Mode Selection
Æ
Æ
Æ
Æ HD
Using the HD menus
& Press the key to display the HD menu.
é Use the Î ï key to access the settings and the Í Æ key to select or adjust setting.
Supported HD format
480p 576p 720p 1080i
HD Install menu
Note : You cannot access Install in the HD menu There is NO Install function in HD mode.
HD Picture and Sound settings
Functions of HD Picture and Sound settings are the same as the TV Picture and Sound settings and work in exactly the same way as the TV
Picture and Sound settings (see page 9).
NOTE : For more details on connection to the
HD equipment, see CONNECTION GUIDE.
Your Philips TV is HDMI compliant. If you do not get a good picture, please change the video format on your device (DVD player, cable set-top box, etc.) to a standard format. For example, for DVD player, select 480p, 576p, 720p or 1080i. For PC, select 640 x 480, 800 x 600 or
1024 x 768. If the problem persists, please refer to your PC user manual on possible software upgrades to your graphics card.
Please note that this is not a defect of the TV set.
Troubleshooting Tips
Below is a list of symptoms you may encounter with your TV. Before you call for service, make these simple checks.
Symptom Possible Causes What you should do
No display on screen • Faulty power supply • Check whether power cord is properly connected
• TV’s Power not turned into the mains socket and to your TV. If there is still
no power, on disconnect plug. Wait for 60 seconds
and re-insert plug. Switch on TV again.
• Press the key on the remote control.
Poor reception
(snowish picture and noise
No picture
No sound on certain channels
No sound
Sound interference
• Faulty antenna connection • Check antenna connection at rear of TV.
• Weak transmission
• Wrong TV system
• Try manually adjusting your picture (refer to page 8).
• Have you chosen the right TV system? (refer to page 8).
• Faulty aerial and cable • Check whether euroconnector cables or aerial
sockets are properly connected.
• Wrong source selected • Check whether the source is correctly selected.
Press button to enter Source list and select
the correct source.
• Wrong TV system • Check whether the correct TV system is selected
(refer to page 8).
• Zero volume level
• Sound muted
• Try increasing volume.
• Check that the mute ( ) mode is not on. If mute
mode is on, press the
mode.
key to deactivate mute
• Aim remote control directly at sensor on front of TV.
• Headphone is connected • Disconnect headphone connection.
• Electrical appliances
interference
• Try switching off any electrical appliances, for
example, hairdryer, vacuum cleaner that are in use.
Unable to understand • Wrong language selected • Press the key to exit menu from screen. Press
the language on accidently
screen to operate set
the key to enter main menu. Use the
to select the fourth item on the main menu. Use
Æ /
the Í Æ key to select correct language.
ï key
key to enter into the next menu level and
TV not responding • Wrong placement of to remote control batteries
• Flat batteries
• Check the placement of the batteries.
• Try changing the batteries.
Occasional appearance • Characteristic of liquid of red, blue, green and black spots on
screen
crystal panel
• This symptom is not a problem. The liquid crystal
panel is built with very high precision technology
giving you the fine picture details. Occasionally, a few
non-active pixels may appear on the screen as a fixed
point of red, blue, green or black. Note that this
does not affect the performance of the set.
Intermittent or flickering picture on authentication failed
in HD mode
• * HDCP (see glossary) • Noise is displayed if the connected digital equipment’s
(DVD player or Set-Top box) *HDCP authentication
failed. Check user manual for the digital equipment
you are connecting.
• Use a standard HDMI to DVI cable.
No sound or picture but • Set on standby mode front panel red light is on
• Press the key on the remote control.
17
Troubleshooting Tips
Symptom Possible Causes What you should do
Cannot access Install • In AV, EXTERNAL or menu HD mode
PC modes do not work
• Press AV key and select TV mode. You can now
access the Install menu by using the Menu key.
• Wrong connections
• Wrong source selected. • Check whether the source is correctly selected.
• Wrong display resolution
Press button to enter Source list and select
the correct source.
a compatible display resolution (see
• Wrong setting of PC
graphic card
• Check whether connections are correct. (see
“Using your TV as PC Monitor” on page 15).
(For more details on connection to the PC
equipment, see “Connection Guide”.
• Check whether you have configured the computer on
as PC Monitor” on page 15 ).
• Check graphic card setting of PC.
“Using your TV
S-Video colour becomes faint
• Wrong detection of
signal
• Check whether power cord is properly connected
• Press the P + key on the remote control to do a
channel up and then press the P – key to do a
channel down.
Black bar on top and bottom of
screen in PC mode
• PC refresh rate too high • Change PC refresh rate to 60 Hz.
18
Glossary
DVI (Digital Visual Interface) : A digital interface standard created by the Digital Display Working Group
(DDWG) to convert analog signals into digital signals to accommodate both analog and digital monitors.
VGA (Video Graphics Array) : a common standard graphics display system for PCs.
RGB signals : These are the three video signals, Red
Green Blue, which make up the picture. Using these signals improves picture quality.
S-VHS signals : These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards.
The luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on the tape. This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal.
NICAM sound : Process by which digital sound can be transmitted.
16:9 : Refers to the ratio between the length and height of the screen. Wide screen televisions have a ratio of 16/9, conventional screen TV sets have a ratio of 4/3.
HDMI (High-Definition Multimedia Interface) :
Provides an uncompressed, all digital audio/video interface between the TV and any HDMI-equipped audio/video component, such as set-top box, DVD player and A/V receiver. HDMI supports enhanced or high-definition video plus two-channel digital audio.
System : Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and LL’. The System setting (p. 8) is used to select these different standards. This is not to be confused with PAL or SECAM colour coding.
PAL is used in most countries in Europe, SECAM in
France, Russia and most African countries. The United
States and Japan use a different system called NTSC.
HDCP (High-bandwidth Digital-Content Protection):
HDCP encrypts the transmission of digital content between the video source or transmitter such as a computer, DVD player or set-top box and the digital display or receiver such as a monitor, television or projector.
Specifications
Panel screen size
Audio output
TV System
Video playback
Sound System
Connectivity
Rear
Side
26”
660 mm (26”)
32”
800 mm (32”)
2 x 5 W
PAL, SECAM
2 x 15 W
NTSC, PAL, SECAM
Mono, Nicam Stereo, Virtual Dolby Surround
Power consumption
Antenna In 75 Ω, Scart 1, Scart 2, HDMI 1, HDMI 2,
Component Video Input, DVI Audio In
Audio In, Video In, S-Video In, Headphone
110 W
< 1 W
120 W
< 1 W Standby power consumption
Set dimensions (with stand)
Width
Depth
Height
805 mm
222 mm
477 mm
924 mm
222 mm
550 mm
Nett Weight (with stand) 13.3 kg 19 kg
Reference table of Countries available for selection
Abbreviation Country
DK
E
F
FI
GB
A
B
CH
D
Austria
Belgium
Switzerland
Germany
Denmark
Spain
France
Finland
England
Abbreviation Country
P
S
N
NL
CZ
GR
I
IRL
L
Abbreviation
Greece
Italy
Ireland
Luxembourg
H
HR
PL
RO
Norway
Netherlands
Portugal
Sweden
RUS
SK
SLO
TR
Czech Republic - - -
Country
Hungary
Croatia
Poland
Romania
Russia
Slovakia
Slovenia
Turkey
Others
19
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V. All rights reserved .
www.philips.com
advertisement