Sony SNC-DH220

(Project No.)

(Date)

(Project Name)

(Project Location)

ARCHITECT & ENGINEER SPECIFICATIONS

SECTION 28 23 29

VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS

SNC-DH220

Full HD, Day/Night, Minidome Network Camera with Exmor Technology

(Software version 1.82.01 or later)

PART 2

– PRODUCTS

2.01 NETWORK CAMERA SPECIFICATIONS

Table of Contents

A. MAIN FEATURES ........................................................................................ 2

B. CAMERA ..................................................................................................... 4

C. CAMERA FEATURES ................................................................................. 7

D. VIDEO ......................................................................................................... 8

E. INTELLIGENT VIDEO ANALYTICS ........................................................... 14

F. AUDIO ....................................................................................................... 15

G. SYSTEM REQUIREMENTS & NETWORK ............................................... 16

H. INETERFACES .......................................................................................... 19

I. GENERAL SPECIFICATIONS ................................................................... 20

J. REGULATORY SPECIFICATIONS ........................................................... 21

K. SUPPLIED ACCESSORIES ...................................................................... 22

L. OPTIONAL ACCESSORIES ...................................................................... 23

M. DIMENSIONS ............................................................................................ 24

VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS

28 23 29 -

1

ARCHITECT & ENGINEER SPECIFICATIONS

SNC-DH220

A. MAIN FEATURES:

1. Full HD, Day/Night, Minidome Network Camera

2. 1080p FHD picture quality (1920 x 1440 pixels maximum resolution), supporting H.264 at 30 fps (IP)

3. 3 compression formats (H.264, MPEG-4, JPEG) and dual streaming capability

4. Dynamic range more than 60 dB

5. Minimum scene illumination of 0.70 lx in Color mode and 0.45 lx in

Black and White (B/W) mode (50 IRE [IP], F 1.2, AGC 42 dB).

6. Exmor CMOS:

This sensor shall realize high quality and low noise images.

Due to its high-speed readout characteristics, this sensor is used to capture multiple HD resolution images at a very high speed.

7. Intelligent Motion Detection (IMD):

This feature shall be able to minimize the number of false alarms by eliminating environmental noise such as trees moving, ripples in water, reflection from wet roads and gain noise to name but a few.

This is very different to other manufacturers that typically compare just two frames together. This camera compares 15 frames together, which ensures that only ambiguous objects moving can trigger a real alarm.

As a result, this enables end users to focus on real events, not suffer from loss of attention and quickly locate video that has been recorded upon alarm activations.

8. Distributed Enhanced Processing Architecture (DEPA):

This technology is an edge based intelligent video analytics. It introduced the ability to work with five different filters enabling the detection of a moving object: appearing; disappearing; staying in an area longer than a pre-defined time; the number of moving objects and the direction an object is moving across a virtual trip wire.

The camera captures the moving images, and analyze the video to determine the size and location of the moving object, and packages this information up as a metadata, and then streams the metadata over the network. The recorder receives the metadata and applies one of five filters to determine when an alarm condition is met.

9. The camera shall be compliant with the Open Network Video

Interface Forum Profile S (ONVIF Profile S) conformance.


28 23 29 -

2


SNC-DH220


28 23 29 -

3


SNC-DH220

B. CAMERA:

1. The camera shall utilize a 1/2.8-type, Exmor CMOS sensor.

2. The number of effective pixels shall be approx. 3.27 Megapixels.

3. The analog MONITOR output of the camera shall be selectable from either the NTSC or PAL standards.

4. Camera synchronization shall be Internal.

5. The camera shall require a minimum scene illumination at either

1920 x 1080 or 1920 x 1440 resolution of:

Color:

0.70 lx (50 IRE [IP], F 1.2, AGC 42 dB)

0.40 lx (30 IRE [IP], F 1.2, AGC 42 dB)

B/W:

0.45 lx (50 IRE [IP], F 1.2, AGC 42 dB)

0.25 lx (30 IRE [IP], F 1.2, AGC 42 dB)

6. The dynamic range shall be more than 60 dB.

7. The camera shall have an AGC capability of up to 42 dB.

8. The camera shall have the following 7 gamma compensation modes:

-Standard: Can be used for various scenes.

-Scene 1: Brings out dark areas without losing details in the bright portions of the scene with high contrast.

-Scene 2: Similar to Scene 1 but more effective than Scene 1.

-Scene 3: Brightens up dark areas of a scene with high contrast.

-Scene 4: No gamma compensation (linear)

-Scene 5: Prevents overexposure when shooting objects are extremely bright.

-Scene 6: Is used when a 1.8 gamma display system is used.

9. The electronic shutter speed shall be set from 1 to 1/10,000 second.


28 23 29 -

4


SNC-DH220

10. The camera shall have a BLC (Backlight Compensation) capability.

11. White balance shall be ATW (approx. 2000 K to 10000 K), ATW-

PRO (approx. 3000 K to 5800 K), Fluorescent lamp, Mercury lamp,

Sodium Vapor lamp, Metal Halide lamp, White LED, One push WB, or Manual.

12. The camera shall have an integrated 2.9X IR compensated DC auto-iris type varifocal lens as a standard equipment.

13. The camera shall also have 3X digital zoom capability.

14. The camera shall have the total zoom ratio of 8.7X with 2.9X optical zoom and 3X digital zoom capabilities.

15. The camera shall have an Easy Focus function, which adjusts the camera focus via the Easy Focus button on the camera unit or remotely via the GUI. When the camera is switched between day and night modes, the Easy Focus function is automatically activated to keep the camera focused.

16. The camera shall also have a ZOOM/FOCUS switch on the front of the camera unit, which is used for manual adjustments of the camera zoom and focus.

17. The camera shall also have a zoom/focus adjustment capability via the ZOOM/FOCUS switch on the camera unit or remotely via the

GUI.

18. The camera lens/CMOS sensor combination shall be a ball-joint type for easy pan, tilt and rotation adjustments, without need for special tools.

This ball-joint mechanism shall be capable of being locked in place with the lock screw on the base of the ball-joint mechanism.

The rotation and pan ranges shall be +/-

180˚ and the tilt range shall be 0˚ to 70˚.


28 23 29 -

5


SNC-DH220

19. The viewing angle shall be:

Horizontal: 88.5˚ to 32.3˚.

20. The focal length shall be 3.1 to 8.9 mm.

21. The aperture range for the lens (F number) shall be F 1.2 (Wide) to

F 2.1 (Tele).

22. The camera shall support up to 16 preset position tours for each of the 2 image compression formats. Up to 5 tours shall be supported.


28 23 29 -

6


SNC-DH220

C. CAMERA FEATURES:

1. The camera shall support an ON/OFF selectable NR (Noise

Reduction) capability.

2. The camera shall have privacy zone masking which blocks out unwanted or prohibited area within the video image to protect privacy.

Mask colors shall be Black, any of 6 shades of Gray, White, Green,

Yellow, Red, Cyan, Magenta, and Blue.

The camera shall be capable of masking up to 4 areas. Such capability shall be via vendor supplied SNC toolbox utility software or the browser-based setup menu.

3. The camera shall have a superimpose capability for the following information:

- Camera ID of up to 20 alphanumeric characters or logo in gif format

- Date/Time data with selectable formats such as year-month-day, hour-minute-seconds; and day-month-year, hour-minutes-seconds

- Zoom or vari-focal ratio (optical and digital)

- Actual frame rate (fps) and bit rate (bps)

- Preset position name of up to 32 alphanumeric characters

- Event -- IMD, camera tampering detection

- Character string of up to 61 alphanumeric characters

Font size of the superimposed data shall be user configurable for large, medium or small. Superimpose position shall be 4 corners, top, bottom, or center of the screen for a total of 7 selectable positions.

4. The camera web browser shall support the following languages:

English, Japanese, Simplified Chinese, Traditional Chinese,

Korean, Portuguese, French, Spanish, German, and Italian.

5. The camera shall have a Smartphone viewer, which can display the camera image and operate Pan/Tilt/Zoom (PTZ) on the smartphone.


28 23 29 -

7


SNC-DH220

D. VIDEO:

1. The supported resolutions in 1920 x 1080 and 1920 x 1440 mode are shown in the following:

When you set the different image size to Image 1 and Image 2, the available combinations are as follows:

○: Possible set

△: Possible set if the resolution is the same as image1

×: Impossible set

When SolidPTZ is set to On, selectable image sizes are as follows.

○: Configurable.

△: Configurable when SolidPTZ of Image 2 is set to Off.

×: Not configurable


28 23 29 -

8


SNC-DH220

2. The camera shall support the following compression formats:

JPEG, MPEG-4 and H.264.

There are 2 ‘resolution’ modes to choose from when installing a camera: 1920 x 1080 (Full HD) (default) or 1920 x 1440.

When 1920 x 1080 mode (aspect ratio: 16:9) is selected, and resolutions in 4:3 aspect ratio are chosen, the displayed image will be stretched vertically. When 1920 x 1440 mode (aspect ratio: 4:3) is selected, and resolutions in 16:9 aspect ratio are chosen, the displayed image will be stretched horizontally.)

3. The camera is compliant with the SMPTE 274M in terms of number of pixels (1920 x 1080) and 16:9 format.

4. The maximum frame rate capability of the camera over LAN at

1920 x 1080 resolution shall be 30 frames per second in H.264, 20 frames per second in MPEG-4 and 16 frames per second in JPEG.

The maximum frame rate at 1920 x 1440 resolution shall be 20 frames per second in H.264, 16 frames per second in MPEG-4 and

12 frames per second in JPEG.

5. The camera shall be capable of image cropping in all compression formats, such that only the area of interest is transmitted, to reduce bandwidth and file storage requirements.

6. The camera shall support electronic pan/tilt/zoom or e-PTZ, when

1920 x 1440 mode is selected. This function shall be supported in both dual streams; image 1 and image 2.


28 23 29 -

9


SNC-DH220

7. The camera shall support up to 8 preset e-PTZ positions for each of the 2 compression formats.

8. The camera shall be capable of streaming 2 standard definition

(VGA) images at the same time during e-PTZ mode, where one of the streams is a scaled down image, while the other is a cropped

VGA image. Both images shall be selectable from any of the 3 compression formats; H.264/MPEG4/JPEG.

9. The camera shall have an Adaptive Rate Control (ARC) function when using MPEG-4 and H.264 compression.

This function when enabled, shall allow the camera to maintain the frame rate at a reduced image quality when network congestion occurs. Should network bandwidth become further restricted, the frame rate shall then drop automatically to a suitable speed to maintain image integrity.

10. The camera shall be capable of limiting the bandwidth from 64 kbps to 8 Mbps in MPEG-4 or H.264, and from 0.5 Mbps to an unlimited bandwidth in JPEG.

11. JPEG compression levels shall be user selectable in 10 levels of compression ratios, based on an image of 24 bits per picture element (8 bits each for YUV).

12. Constant bit rate algorithm for JPEG data:

The camera shall be capable of equalizing JPEG data sizes to have stable bandwidth utilization. Data size for each compression level is as follows:

13. Actual frame rate in JPEG shall be shown in the following table:


28 23 29 -

10


SNC-DH220

14. The camera shall have the capability of simultaneously encoding up to 2 of the following compression formats in any combination, including multiple instances of the same compression format:

JPEG, MPEG-4, and/or H.264.

The maximum frame rates of each combination are shown in the following tables:


28 23 29 -

11


SNC-DH220

15. The camera shall be capable of supporting up to 5 users simultaneously over the network.

16. The camera shall have up to 6 user level settings.

The administrator shall have complete access/control of the cameras. The other 5 levels of access can be set to limit user privileges to functions such as viewing, changing image size, etc.

Access to functions shall be determined as shown in the following table:


28 23 29 -

12


SNC-DH220


28 23 29 -

13


SNC-DH220

E. INTELLIGENT VIDEO ANALYTICS:

1. The camera shall incorporate a built-in unique Intelligent Motion

Detection (IMD) capability that supports Distributed Enhanced

Processing Architecture (DEPA) technology.

To minimize false triggers, this Intelligent Motion Detection shall compare the current image with prior 15 frames within the camera.

This algorithm shall allow the camera to discriminate against some environmental noise such as shaking leaves or Auto Gain Control maximum rate noise.

2. The camera shall have a camera tampering detection function that alerts the operator if the camera is tampered with. Tampering can include spraying of the camera lens, covering it with a cloth, or changing of the mounting direction.


28 23 29 -

14

F. AUDIO:

None


SNC-DH220


28 23 29 -

15


SNC-DH220

G. SYSTEM REQUIREMENTS & NETWORK:

1. The supported operating systems shall be Microsoft Windows 8

Pro* 32 bit and 64 bit, Microsoft Windows 7 32 bit and 64 bit

(Ultimate/Professional), Microsoft Windows Vista 32 bit

(Ultimate/Business), Microsoft Windows XP 32 bit (Professional), and Microsoft DirectX 9.0c or higher

*Software version 1.79 or later.

2. Minimum PC requirements shall be the Intel Core2 Duo Processor,

2.33 GHz or higher, with 2 GB RAM or more supporting 1600 x

1200 or higher resolution (2560 x 1600 resolution or higher is recommended), 24-bit True Color display capability with Ethernet

100Base-TX.

3. The camera shall incorporate a built-in web server, such that the standard web browser Microsoft Windows Internet Explorer

(version 6.0, 7.0, 8.0, 9.0 or 10.0 recommended) can be used to access the camera without need for special viewer software.

4. The following web browsers can also be used to access the camera with the ‘Plug-in Free’ viewer: Firefox version 3.5, Safari version 4.0 and Google Chrome version 4.0. When using these browsers, the video is displayed in JPEG format.

5.

The ‘Plug-in Free’ viewer also supports the Flash plug-in and

ActiveX viewer, the latter allowing for MPEG-4 and H.264 video streams.

6. The camera shall support ActiveX viewer which allows the camera image to be viewed in Internet Explorer.

The ActiveX viewer allows for recording of video directly to the

PC’s hard drive.

7. The camera shall be capable of generating HTML code for the video image, allowing for easy web page integration.

8. The camera shall support Windows Desktop Gadgets and shall allow for the ActiveX viewer to be modified.

9. The camera shall support the following network protocols:

IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP

(client only), SSL, SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP

(IPv4 only), and SNMP (v1, v2c, v3).

Network security shall be via password (basic authentication) and

IP filtering.


28 23 29 -

16


SNC-DH220

10. The camera shall have the capability to stream MPEG-4 and H.264 video in TCP protocol or MPEG-4 and H.264 in UDP

(unicast/multicast) protocol.

11. The camera shall be capable of deterring brute force attacks.

The camera shall recognize a brute force attack and refuse HTTP requests from an attacker's IP address for a preconfigured number of seconds. The camera shall determine that a brute force attack occurred when a client authentication error occurs 5 consecutive times.

12. The camera shall be capable of dynamic IP address change notification. It shall accomplish this via an email to a specified address or by HTTP when its IP address changes.

13. The camera shall support HTTPS client authentication.

14. The camera shall have an FTP client capability which allows the following:

- Transferring a JPEG image to a pre-specified FTP server when an alarm is triggered by either motion detection or camera tampering detection.

- Periodically capturing a JPEG image and transferring it to the

FTP server.

15. The camera shall have an email (SMTP) notification capability which allows the following:

- Sending an email to pre-specified users when an alarm is triggered by either motion detection, camera tampering detection or sensor input. A JPEG image, which is linked with the alarm trigger, can be attached to the email.

- Periodically capturing a JPEG image and sending it via email.

16. The camera shall support RTSP (IPv4) protocol based upon RFC

2326 and shall support the following options: DESCRIBE, SETUP,

PLAY, TEARDOWN, and GET_PARAMETER.

17. The camera shall support National Transportation Communications for ITS (NTCIP) protocol.

18. The camera shall support QoS technology using Differentiated

Services Code Point (DSCP).


28 23 29 -

17


SNC-DH220

19. The SNC toolbox software includes the IP Setup (including group camera management) program, Firmware Upgrade Tool, Privacy

Masking Tool, Custom Homepage Installer, and Group Camera

Setting Scheduler.

The SNC toolbox shall be supplied with the camera as a standard accessory in the CD-ROM.

20. The camera shall support IP Filtering, whereby access to the camera can be restricted to one or more groups of selected users.

Up to 10 different groups can be established by defining an IP address range for each group.

21. The camera shall support IEEE 802.1X authentication, and shall:

- comply with the IEEE 802.1X standards,

- be capable of being integrated into an IEEE 802.1X network to achieve high network security,

- support EAP-TLS mode to use a key pair from a Certificate

Authority (CA),

- support EAP-MD5 mode,

- support PEAP mode.

22. The camera shall have user configurable port settings.

23. Upon CGI command request, system log shall be recorded on a built-in memory (non volatile memory).


28 23 29 -

18


SNC-DH220

H. INETERFACES:

1. The composite analog video output shall be 1.0 V peak-to-peak @

75 ohms.

2. The camera shall have a composite analog MONITOR output in addition to streaming video via Ethernet.

The composite analog video output can be used for monitoring while installing the camera to adjust the field of view and focus.

3. The composite analog video output shall be a phono jack type connector.

4. The camera shall have an RJ-45 socket accessible via pigtail.

5. The network interface shall be via an 8-pin RJ-45 connector,

10Base-T/100Base-TX Ethernet.

Both IPv6 and IPv4 are supported.


28 23 29 -

19


SNC-DH220

I. GENERAL SPECIFICATIONS:

1. The camera input power shall be Power over Ethernet (PoE) (IEEE

802.3af compliant) and the power classification shall be Class 2.

2. Power consumption for the camera shall be 6.0 W maximum.

3. The camera operating temperature shall be within the following range:

+14 ˚F to +122 ˚F (-10 ˚C to +50 ˚C)

Cold start temperature must be gre ater than +32 ˚F (0 ˚C).

4. The camera storage temperature shall be within the following range:

-

4 ˚F to +140 ˚F (-20 ˚C to +60 ˚C)

5. The camera operating humidity shall be within the range of 20 % to

80 % (non-condensing).

6. The camera storage humidity shall be within the range of 20 % to

95 % (non-condensing).

7. The camera dimensions (Dia. x H) shall be approximately:

5 5/8 in. x 4 3/4 in. (140 mm x 118 mm).

8. The camera shall weigh approximately 1 lb. 9 oz. (715 g) (not including cables and a bracket).

9. The camera shall be capable of being flush mounted to a ceiling using an optional YT-ICB45 or YT-ICB140 flush mount kit, available from the camera manufacturer.

10. The camera shall have a conduit opening for wiring when the camera is wall or ceiling mounted.


28 23 29 -

20


SNC-DH220

J. REGULATORY SPECIFICATIONS:

1. UL2044, IEC60950-1

2. FCC Class A Digital Device

3. IC Class A Digital Device

4. VCCI Class A

5. Emission: EN55022(A) + EN55024 + EN50 130-4

6. Emission: AS/NZS CISPR22


28 23 29 -

21


SNC-DH220

K. SUPPLIED ACCESSORIES:

1. CD-

ROM (User’s Guide, SNC toolbox) (1)

2. Installation Manual (1)

3. Bracket (1)

4. Template (1)

5. Camera unit mounting screws (1 set)

6. Shoulder screw M4 (1)

7. LAN cable (1)

8. Wire rope (1)

9. Warranty booklet (1)


28 23 29 -

22


SNC-DH220

L. OPTIONAL ACCESSORIES:

1. YT-ICB45 In-ceiling bracket

2. YT-ICB140 In-ceiling bracket


28 23 29 -

23

M. DIMENSIONS:


SNC-DH220


28 23 29 -

24

©2014 Sony Corporation


SNC-DH220

Features and specifications are subject to change without notice. Non-metric weights and measurements are approximate.

Sony is a registered trademark of Sony Corporation. IPELA and “Exmor” are trademarks of Sony Corporation.

Microsoft, Windows, Windows Vista, Internet Explorer and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

Intel, Pentium and Intel Core are trademarks or registered trademarks of Intel

Corporation or its subsidiaries in the United States and other countries.

All other trademarks are the property of their respective owners.


28 23 29 -

25

Sony SNC-DH220

PART 2

– PRODUCTS

2.01 NETWORK CAMERA SPECIFICATIONS

Table of Contents

A. MAIN FEATURES:

B. CAMERA:

C. CAMERA FEATURES:

D. VIDEO:

E. INTELLIGENT VIDEO ANALYTICS:

F. AUDIO:

G. SYSTEM REQUIREMENTS & NETWORK:

H. INETERFACES:

I. GENERAL SPECIFICATIONS:

J. REGULATORY SPECIFICATIONS:

K. SUPPLIED ACCESSORIES:

L. OPTIONAL ACCESSORIES:

M. DIMENSIONS:

Related manuals

Table of contents

Sony SNC-DH220

PART 2

– PRODUCTS

2.01 NETWORK CAMERA SPECIFICATIONS

Table of Contents

A. MAIN FEATURES:

B. CAMERA:

C. CAMERA FEATURES:

D. VIDEO:

E. INTELLIGENT VIDEO ANALYTICS:

F. AUDIO:

G. SYSTEM REQUIREMENTS & NETWORK:

H. INETERFACES:

I. GENERAL SPECIFICATIONS:

J. REGULATORY SPECIFICATIONS:

K. SUPPLIED ACCESSORIES:

L. OPTIONAL ACCESSORIES:

M. DIMENSIONS:

Related manuals

Sony

SNCDH220

Promise Technology

Network Device EX8654

Sony

SNC-DH220/POE

Sony

SNC-EB520

Sony

SNC-DH160

Sony

(1080p)

Sony

SNC-DH110

Table of contents