FTTH Gateway Product Catalogue

Better

Connected

Living

Intelligent Gateway and

Smart Home Solutions for

Fiber-to-the-Home Networks

Page 2

About

Icotera

Icotera is a leading European developer and manufacturer of standard-setting Fiber-to-the-Home (FTTH) CPE solutions. We pride ourselves on creating and delivering products with superior design, quality and performance, and are dedicated to providing fiber network operators with tailor-made, flexible and cost-effective solutions that fit their individual needs.

We are a technological leader in our field, with more than ten years of experience in fiber solutions. Our company headquarters are located in Denmark, while all of our

R&D, manufacturing and customer support is in operation throughout Europe. Our hardware and software development is produced in-house, guaranteeing our customers the quality they need. We have proven our ability to adapt quickly and effectively to future technologies, working with customers to provide them with the services they require.

Our products and solutions are currently supporting the efforts of leading network operators throughout Europe, providing high-speed Internet broadband and content services to hundreds of thousands of private homes via the growing network of fiber-optic cables that are now being deployed across the continent.

Our mission is to enable our customers to deliver high quality FTTH solutions and services to their subscribers, providing them with additional revenue streams that contribute to their sustainable growth, both now and in the future.

Our goal is to provide our customers’ subscribers with an innovative, ’Better Connected Living’ experience. We do this by offering a growing ecosystem of applications and services, including Energy Management solutions, Alarm

& Surveillance, Home Automation, Wi-Fi boosters and much, much more.

We aim to make our customers successful by delivering:

Quality that lasts

State-of-the-art FTTH P2P and GPON solutions, crafted with superior quality of design, components, software, and manufacturing.

Tailor-made solutions

Solutions that exceed the required standards, with multiple management systems integrated along with in-house R&D, allowing us to meet our customers’ individual needs and requirements.

Innovation platform

New and innovative applications and products that combined with high-speed Internet broadband, enhance the experience of every FTTH end-user.

24/7

Support

The highest level of in-house customer support and after-market services in the industry, enabling fast and reliable handling of feature request and day-to-day support.

Page 3

Page 4

Customer Testimonials

“Icotera was chosen as our CPE partner as we believed they were best placed to fulfil all of our technical requirements at the very best price. Their innovative system is easy to install, looks great and has proven to have a very high level of quality. Their technical support team is quick to respond to our requests, and issues are always fixed quickly. We have been very happy with this partnership.”

Michael Lund, Operations Manager

Syd Energi A/S

“We were looking for a reliable CPE partner for a fiber broadband project in Jordan, which also happened to be Orange’s first attempt to convert almost all services to IPv6. Icotera appeared very professional and technically competent, and turned out to be the only vendor who could deliver to our exact specifications. With Icotera’s proven success in

IPv6 and implementation flexibility, they became the natural choice for Orange.”

Nicola Fanous, Data Network Team Leader

Orange Jordan

“NTE considers Icotera to be a visionary fiber technology company, with many years of solid experience in P2P fiber CPE solutions. Icotera worked with us closely before, during and after the CPE selection phase, which made the overall experience a very positive one for both us and our customers. Looking into the future, Icotera has also been open-minded and solution- oriented to our new feature requests, and we therefore have great confidence in their ability to support our company in the future.”

Tom André Sandal, Technical Manager

NTE

Customer Testimonials

Design that makes a difference

Unique Industrial Design

The housing of Icotera gateways has been designed with both aesthetics and functionality in mind. In addition to holding the most powerful optical fiber residential gateways on the market, they also set a brand new standard for ease-of-installation and maintenance. This innovative design minimizes the total cost of ownership, delivering significant savings to our customers.

What’s more, our units have been created to seamlessly fit in with the interiors of both modern and traditional households, with a discreet and compact design that still leaves a lasting impression.

Thanks to our belief in the best Danish practices in design and engineering, our units have even been awarded with the prestigious Red Dot award in product design.

It is not all about design though - optical fiber networks including the fiber infrastructure that sits within end-users households, benefits from an extremely long life, on a par with traditional telephony cabling. At Icotera we appreciate the longevity of this technology, which means that our fiber termination units (FTUs) have also been engineered to support future generations of optical fiber gateways.

Advanced slide-on system

The innovative slide-on system built into our optical fiber gateways has been designed to make it simple to change gateways without interfering with the fiber installation.

This makes it easy for end-users to replace their gateways, and thereby dramatically cuts the costs for network operators.

This system is an integral part of Icotera FTUs and gateways, allowing for mechanical fixtures and the simple removal of the gateway, as well as facilitating stable and reliable optical interconnections.

The mechanical interface is universal in design, and will be featured in future generations of gateways, making for easy upgrades, simple maintenance and reduced costs.

Multi-purpose Fiber

Termination Unit

To support the expected impressive longevity of fiber installations, Icotera has designed an advanced, universal Fiber

Termination Unit (FTU).

This FTU supports all types of fiber installation methodologies and facilitates the use of single or dual-fiber in both cable and tube. The FTU provides sufficient space for winding up and reversing the fibers in accordance with minimum bending radius requirements of standard fibers. There is also plenty of room for a gas block, fixtures for splicing rods, and a

Wavelength Division Multiplex (WDM) filter.

This innovative design allows for a high-quality standard of the fiber installation, while minimizing labor and reducing the cost of installation and maintenance.

Page 5

P2P FTTH

Gateway

i6800-series

Residential Gateway

The Icotera i6800 residential gateway integrates optical Ethernet-based gigabit data transmission with

Layer 2-4 functionality, VoIP, 802.11ac & bgn Wi-Fi,

CATV and USB 3.0.

• Best-in-class Wi-Fi

• Ease of use & installation

• Vendor independent

• Smart Home platform

• Award-winning industrial design

• Lowest Total Cost of Ownership

Page 6

Powerful hardware platform

The Icotera i6800 Fiber-to-the-Home (FTTH) gateway demonstrates its great strength by bringing together a wide feature set and flawless performance. Its foundation is built on a powerful, cutting-edge dual-core architecture. This, paired with an ASIC for packet forwarding, ensures the platform is always ready to cope with additional tasks while processing VoIP, Gigabit routing of IPv4 with NAT, IPv6 and stateful filtering, traffic switching/bridging and high speed Wi-Fi.

Next generation Wi-Fi solution

With Wi-Fi becoming the preferred communication technology inside the home, the need for fast and stable wireless connections is becoming ever more important. The i6800 delivers not only backwards compatibility with any 802.11a/b/g/n Wi-Fi certified device, but also includes the very latest standard —

802.11ac. With the added 802.11ac solution, the i6800 is capable of delivering 867+300 Mbps and more than 650 Mbps of combined throughput in real home and office environment.

Innovative feature set

The i6800 provides exceptional Layer 2 functionality that can effortlessly handle 16 bridging instances, 16 Wi-Fi APs over 2 radios, multiple WAN interfaces, PPPoE and in-band secure management. The CATV AGC receiver offers broadband cable- television services to the subscriber with seamless monitoring and configuration of the power levels. As an optional feature, this FTTH gateway offers a complete and customizable filter solution with low-pass filters for individual RF channel plans.

Ease of control

A great variety of management protocols (e.g. SNMP v1/v2, syslog, SSH, Telnet and TR-069) is integrated and supported, which guarantees effortless control over the i6800. Paired with our fail-proof, zero-touch auto provisioning mechanism, they provide easy and trouble-free daily operations. To guarantee trouble-free firmware roll-outs in harsh network environments, the i6800 also comes with dual-bank firmware.

Integrated Smart Home platform

The i6800 gateway supports the unique Icotera Smart Home platform via state-of-the-art low-consuming wireless technology. The platform offers great solutions for end-users within

Alarm & Surveillance, Energy Management and Home automation. The cloud-based platform connects to third party device-hardware, which makes the possibilities for connecting devices close to endless. For the network operator or service provider, the platform offers a unique opportunity for additional revenue streams and higher customer loyalty. The Icotera

Smart Home platform is deeply integrated into the Icotera gateway, which makes the daily use effortless and very valuable for the modern household.

i6800

Residential Gateway

FEATURES

• Best-in-class Wi-Fi solution

• Vendor-independent


• Integrated CATV solution

• Low power consumption

• Optional operator branding

• Extensive IPv6 support

• Customized firmware

• Built-in Smart Home platform

NETWORK

COMMUNICATION

WAN INTERFACE

• Single-mode fiber (ITU-T G.652) SC/PC connector

• 100BaseBX10/20 compliant


• Tx: 1310 nm, Rx: 1480–1600 nm

• Full-duplex transmission

• Operating distance: 20 km

• Transmit power: -7 – -2 dBm

• Receive sensitivity: -3 – -23 dBm

• Class 1 laser product

• Auto detection of 100Mbps or Gigabit

LAN INTERFACE

• 4 RJ45 connectors 10/100/1000 Base

T(X)

• Auto-negotiation for speed and duplex

• Auto MDI/MDX

• Jumbo packets

• 802.1x

• Integrated cable tester, detects:

- Short

- Open

- Impedance mismatch

- Cable length

LAYER 2

• 16 bridge instances

• 64 byte forwarding at line rate

• Jumbo 9k packets

• IGMP v1/v2/v3 snooping

• 802.1p marking

• VLAN support

• Wi-Fi support

• Transparent IPv6 forwarding

• DHCP relay with option 82

• 2k address entries

• Rate-limit per switch port

Wi-Fi INTERFACES

802.11ac Wi-Fi

• 2T2R MIMO

• 5 GHz band w/QAM256 and 80 MHz

• Authentication methods - Open -

802.1x - WEP64 - WEP128 - WPA-WPA2

• Up to 8 SSIDs

• MAC filtering

• Advanced channel selection

• Software Tx power control

• Extensive monitoring

• Neighbor scanning

• Beamforming

• LDPC + STBC

• Wireless Client Isolation

802.11bgn Wi-Fi

• 802.11B/G/N 2T2R MIMO

• 2.4 GHz band w/QAM64 and 40 MHz


802.1x - WEP64 - WEP128 - WPA -

WPA2

• Up to 8 SSIDs

• MAC filtering






LAYER 3

• Virtual interfaces

• Multiple WAN interfaces in one router

• 64 byte forwarding at line rate with routing/NAT

• IGMP v1/v2/v3 proxy with fast-leave and monitoring

• Stateful Firewall

• IPv4 - SNAT, DNAT, DMZ - DNS proxy -

DHCP client and server

• IPv6 - Prefix delegation RFC3769 -

DHCP client

• PPPoE (termination)

• 2k HW connection tracking

• SW connection tracking

• RTSP stateful proxy

• Protocol helpers for: SIP, FTP, TFTP,

PPTP, L2TP and IPSec

• DNS based Parental-Control

• Guest Access

QoS

• 8 queues

• Layer 2 and 3 QoS features - Packet classification marking - Queuing -

Scheduling - Rate-limiting

• Marking and Queuing w/ 802.1p, ToS,

DiffServ classification

• Globally shared rate-limiting queues

i6800 Residential Gateway

Configuration possibilities

USB

• 1x USB 3.0 host

• 1x USB 2.0 host

• Prepared for: Z-Wave, ZigBee, CAT-iq,

Storage, Printers

VoIP

• 2 separate POTS lines SIP (RFC3261)

• 5 REN support

• DTMF signalling - SIP INFO - Inband -

Auto - RFC 2833

• Caller ID support (DTMF/FSK/DTMF

DK)

• CLIR

• Advanced dialplan

• B-Number manipulation

• Class 5 services - Forward all calls

- Forward on busy - Forward on no answer - Call waiting

• Codecs: G.711A a-law - G.711U μ-law -

G.722 - G.729AB

• Codec negotiation

• Modem/Fax detection

• Auto gain control

• Adaptive jitter buffer 10-300ms

• Silence suppression

• G.165 Echo Cancellation

• LEC (Line Echo Cancellation) 2- 128ms

• VAD (Voice Activity Detection)

• CNG (Comfort Noise Generation)

• PLC (Packet Loss Concealment)

CATV (OPTIONAL)

OPTICAL PARAMETERS

• Saturation power: +2dBm

• Input level range: -10 to 0 dBm

• Input wave length: 1270 - 1610 nm

• Optical connector: SC/APC

• ITU-T G.652 Single Mode fiber

• Software monitoring of RX level in 0.1 dB steps

• Low-signal LED configurable

RF PARAMETERS

• RF connector: 75 Ohm “F”

• Frequency: 45-870MHz

• EIN @-10dBm: 4 pA/√Hz

• EIN @ 0dBm: < 14 pA/√(Hz)

• Tilt: 5 dB

• RF output AGC @-8 to 0 dBm (3.5%

OMI): 80 dBuV

• Max. RF output @ 0 dBm (3.5% OMI):

96 dBuV

• CNR (CENELEC 42 channels): ≥ 51 dB

• CSO (CENELEC 42 channels): ≥ 60 dBc

• CTB (CENELEC 42 channels): ≥ 60 dBc

• RF filters (optional): up to 2

• Software adjustable RF output level w/AGC

MANAGEMENT &

MONITORING

• Shared or separate IP interface for management

• L1-L3 filters for all local services

• SSHv2 with key authentication

• Telnet with authentication

• End-user oriented web interface

(configurable) - Wi-Fi - Guest network

- LAN network - Port forwarding, NAT loopback, DMZ, DynDNS, Status and monitoring

• TR-069 supporting - TR-104 (VoIP) -

TR-181 (Network)

• CLI with auto-completion

• SNMP v1/v2 (IF-MIB, ICOTERA private

MIB)

• Multicast analyzer

- Debugging of live Multicast streams

- Provides detailed information from

MPEG-TS and RTP layers

• Extensive debug possibilities

• Packet dumping

• All settings are stored locally in flash

• Zero-touch configuration with DHCP/

TFTP/HTTP/FTP or TR-069

• Automatic firmware and configuration update (polling)

• Dual bank firmware w/ fail-safe upgrading

• LED brightness configurable by operator and/or End-User

• Hardware watchdog

OPERATIONAL

SPECIFICATIONS

• DC12V input ±10%

• Power consumption maximum: 14.4 W

(excl. USB ports)

• Operating temperature: 5 – 45°C

• Storage temperature: -20 – 85°C

• Humidity: 5% – 95% (non-condensing)

PHYSICAL SPECIFICATIONS

CASING

• Weight: 395 g

• Size: 190 x 110 x 48 mm (W x H x D)

• Front LEDs configurable by operator and/or end-user: Power/WAN status

(link/traffic/provisioning) - VoIP port

1 - VoIP port 2 - Wi-Fi - CATV (status/ signal power)

• LAN status LEDs (link/traffic, duplex) per interface

FIBER TERMINATION UNIT

(OPTIONAL)

• Slide-on mechanism for easy installation

• FTU support for - Gas block unit

(sold separately) - WDM filter (sold separately)

• Optional blind cover for FTU

Gateway Interface Configurations:

Model i6801: i6802: i6805: i6806:

Uplink

BX20

BX20

BX20

BX20

LAN

4x

4x

4x

4x

USB

2x

2x

2x

2x

POTS

2x

2x

2x

2x

CATV

1x

1x

Wi-Fi

802.11b/g/n + 802.11ac

802.11b/g/n + 802.11ac

802.11b/g/n + 802.11ac

802.11b/g/n + 802.11ac

NOTE: Please contact Sales for further details on information listed and feature requests.

Antennas

2x2 Int.

2x2 Int.

2x2 Int.

2x2 Int.

Bottom

FTU

Patch

FTU

Patch

Revision 2.0. Icotera A/S reserves the right to change specifications without further notice.

www.icotera.com Page 7

P2P Layer 2

Switch

i6400-series

Residential Switch

The Icotera i6400 Layer 2 residential fiber switch, prepared for Open Access networks, integrates optical

Ethernet-based data transmission with Layer 2-4 functionality, CATV and USB.



• Local 24/7 support




Strong hardware base

The Icotera i6400 is a fully featured Layer 2 fiber switch with an advanced feature set. i6400 is targeted towards open access networks and, in general, operators with a layer 2 demarcation point. All switching is done in hardware, resulting in lightning fast wirespeed gigabit transfer rates and giving the instant-on feeling for the end-user.

State of the art features

The i6400 is a complete, feature-full package of Layer 2 functionalities. Gigabit rates and instant forwarding due to powerful switching capability, optical signal auto-detection and support of 100Base-BX-10/20 and 1000Base-BX standards is a clear token of this high quality switch. The CATV AGC receiver gives the subscriber cable television access with power level configuration and monitoring. To top it off, this fiber switch offers (optionally) individual RF channel plans in a complete filter solution with high-block band attenuation.

Page 8

Extensive functionality

The i6400 offers an advanced array of traffic control and shaping features, such as: Ethernet and IP filtering up to layer

4, MAC address limiting, IP source guard and VLAN forwarding and filtering. Agile reduction of traffic overhead is managed by jumbo frame forwarding leading to lower packet rates. Adaptive mechanisms control the quality of optical signal (both CATV and DATA) and enable the user to swiftly zero in on any problems in the upstream network. Ethernet link performance is continuously controlled by 802.3ah OAM instruments that allow prompt resolution of any arising problems. Link state information is propagated on both WAN and LAN side and power consumption is managed with advanced management capabilities.

Full control and management i6400 can easily be managed by protocols such as EOAM, SNMP v1/v2, SSH/Telnet and TR-069. Supported by our zero-touch auto provisioning mechanism it allows for easy and trouble-free daily operations.

Built-in Smart Home platform

The i6400 layer 2 switch supports the unique Icotera Smart

Home platform via state-of-the-art low-consuming wireless technology. The platform offers great solutions for end-users within Alarm & Surveillance, Energy Management and Home automation. The cloud-based platform connects to third party device-hardware, which makes the possibilities for connecting devices close to endless. For the network operator or service provider, the platform offers an opportunity for additional revenue streams and higher customer loyalty. The Icotera Smart

Home platform is deeply integrated into the Icotera switch, which makes the daily use effortless and very valuable for the modern household.

i6400

Residential Switch

FEATURES



• Integrated CATV solution (optional)

• Developed and manufactured in

Europe





NETWORK

COMMUNICATION

WAN INTERFACE

• Single mode fiber (ITU-T G.652) SC/PC connector



• Tx: 1310 nm, Rx: 1480–1600 nm





• Jumbo packets

• DDM (optional), providing measurements of:

- TX Power

- RX Power

- Temperature

- Voltage

- Current TX Bias

• Link propagation

LAN INTERFACE

• 4x 10/100/1000Base-T(x) RJ45 connector


• Auto MDI/MDX

• Jumbo packets


• Cable tester, detects:

- Short

- Open


- Cable length

LAYER 2

• Jumbo packet forwarding

• OSI Layer 2 filtering

• 4k VLAN

• VLAN filtering

• VLAN remapping

• VLAN termination

• MAC limiting (1–254 or disabled)

• IGMP v1/v2 snooping

• MLD v1/v2 snooping

• QinQ

• Port mirroring

• Loop detection

• Broadcast suppression

LAYER 3

• IP source guard

• ARP inspection

• OSI Layer 3 and 4 filtering by ACLs

QoS

• 4 queues per interface

• Ingress/Egress rate limiting per

- Port

- Queue

- Access list

• Rate limiting in 32 Kbps steps

• DSCP mapping/remapping

• ToS mapping/remapping

• 802.1p mapping/remapping

• Mechanisms

- Weighted Fair Queuing

- Strict SP

CATV (OPTIONAL)




• Input wave length: 1310/1550 nm





RF PARAMETERS




• Tilt: 5 dB


OMI): 80 dBuV


96 dBuV






• SNMP v1/v2

- IF-MIB2

- Icotera private MIB

- Community protected

- Traps

• 802.3ah OAM

- Link performance monitoring

- Fault detection

- Loopback testing



OPERATIONAL

SPECIFICATIONS

• DC5V input (±10%)


(excl. USB ports)




USB

• 2.0 USB ports

• Prepared for

- Z-Wave

- ZigBee

- CAT-iq

- Storage

MANAGEMENT &

MONITORING

• IPv4 management interface

• Separate VLAN (optional)

• Access filtering based on IP source network

• Zero-touch provisioning





• 64-bit port counters

- Unicast

- Packet size (64, 128, 256, 512, 1024,

1518, 9k)

- Multicast

- Broadcast

- FCS error

- Align error

- Undersized

- Fragmented

- Too long

- Good byte

- Bad byte

- Overflow

- Filtered

- Collisions

PHYSICAL

SPECIFICATIONS

CASING

• Weight: 395 g

• Size: 190 x 110 x 48 mm (W x H x D)

• Front LEDs configurable by operator:

- Power/WAN status

(link/traffic/provisioning)

- CATV (status/signal power)


• LED auto off after timeout period


(OPTIONAL)


• FTU support for

- Gas block unit (sold separately)

- WDM filter (sold separately)


i6400 Residential Switch



Model i6401: i6402: i6405: i6406:

Uplink

BX20

BX20

BX20

BX20

LAN

4x

4x

4x

4x

USB

2x

2x

2x

2x

CATV

1x

1x

Bottom

FTU

Patch

FTU

Patch


Revision 2.0 Icotera A/S reserves the right to change specifications without further notice.


P2P Media

Converter

i6200-series

Residential Media Converter

The Icotera i6200 residential media converter integrates optical Ethernet-based data transmission with

Layer 2-4 functionality, CATV and USB.



• Local 24/7 support

• Smart Home Platform



Page 10

Strong hardware base

A media converter must offer more than simple conversion of light into electrical signals. The i6200 was designed with this in mind and the result is a low-powered, feature-full and yet affordable demarcation point for your optical FTTH network. All traffic is hardware processed, resulting in blazing wirespeed gigabit transfer rates which gives the instant-on feeling for the end-user.

Innovative features

The i6200 offers all the must-have features of an advanced media converter. Due to its support of 100Base-BX-10/20 and

1000Base-BX-10/20 standard and optical signal auto-detection, the packets may be forwarded instantly at gigabit rates, allowing for a smooth and effortless experience. The CATV AGC receiver offers cable television services to the subscriber with monitoring and configuration of the power levels. As an option, this media converter features a complete low pass filter (LPF) solution allowing for individual RF channel plans (optional).

High efficiency and flexibility

On top of that, the i6200 provides a number of more advanced features that enable full traffic control and shaping, such as

Ethernet and IP filtering up to layer 4, MAC address limiting, IP source guard or VLAN forwarding and filtering.

Jumbo frame forwarding leads to lower packet rates, thus significantly reducing the traffic overhead. The quality of the optical signal (both CATV and DATA) is controlled by means of flexible mechanisms, enabling quick problem determination in the upstream network. The implemented 802.3ah OAM instruments allow monitoring the Ethernet link performance on a continuous basis and taking corrective actions if necessary.

Ease of control i6200 can be controlled by a number of management protocols

(e.g. EOAM, SNMP v1/v2, SSH/Telnet and TR-069). Combined with our fail-proof zero-touch auto provisioning mechanism it allows for easy and trouble-free daily operations.


The i6200 supports the unique Icotera Smart Home platform via state-of-the-art low-consuming wireless technology. The platform offers great solutions for end-users within Alarm &

Surveillance, Energy Management and Home automation. The cloud-based platform connects to third party device-hardware, which makes the possibilities for connecting devices close to endless. For the network operator or service provider, the platform offers an opportunity for additional revenue streams and higher customer loyalty. The Icotera Smart-Home platform is deeply integrated into the Icotera gateway, which makes the daily use effortless and very valuable for the modern household.

i6200

Residential Media Converter

FEATURES



• Integrated CATV solution (optional)

• Developed and manufactured in

Europe





NETWORK

COMMUNICATION

WAN INTERFACE

• Single mode fiber (ITU-T G.652) SC/PC connector



• Tx: 1310 nm, Rx: 1480–1600 nm





• Jumbo packets

• DDM (optional), providing measurements of:

- TX Power

- RX Power

- Temperature

- Voltage

- Current TX Bias


LAN INTERFACE

• 1x RJ45 connectors 10/100/1000 Base

T(X)


• Auto MDI/MDX

• Jumbo packets


• Cable tester, detects:

- Short

- Open


- Cable length

LAYER 2

• Jumbo packet forwarding

• OSI Layer 2 filtering

• 4k VLAN

• VLAN filtering

• VLAN remapping

• VLAN termination

• MAC limiting (1–254 or disabled)

• IGMP v1/v2 snooping

• MLD v1/v2 snooping

• QinQ

• Port mirroring

• Loop detection

• Broadcast suppression

LAYER 3

• IP source guard

• ARP inspection

• OSI Layer 3 and 4 filtering by ACLs

QoS

• 4 queues per interface

• Ingress/Egress rate limiting per

- Port

- Queue

- Access list

• Rate limiting in 32 Kbps steps

• DSCP mapping/remapping

• ToS mapping/remapping

• 802.1p mapping/remapping

• Mechanisms

- Weighted Fair Queuing

- Strict SP

CATV (OPTIONAL)




• Input wave length: 1310/1550 nm





RF PARAMETERS




• Tilt: 5 dB


OMI): 80 dBuV


96 dBuV






USB

• 2.0 USB ports

• Prepared for

- Z-Wave

- ZigBee

- CAT-iq

- Storage

OPERATIONAL

SPECIFICATIONS

• DC5V input (±10%)

• Power consumption maximum:

2.9 W (excl. USB ports)




MANAGEMENT &

MONITORING

• IPv4 management interface

• Separate VLAN (optional)

• Access filtering based on IP source network

• Zero-touch provisioning





• 64-bit port counters

- Unicast

- Packet size (64, 128, 256, 512, 1024,

1518, 9k)

- Multicast

- Broadcast

- FCS error

- Align error

- Undersized

- Fragmented

- Too long

- Good byte

- Bad byte

- Overflow

- Filtered

- Collisions

• SNMP v1/v2

- IF-MIB2

- Icotera private MIB

- Community protected

- Traps

• 802.3ah OAM

- Link performance monitoring

- Fault detection

- Loopback testing



PPHYSICAL

SPECIFICATIONS

CASING

• Weight: 395 g

• Size: 190 x 110 x 48 mm (W x H x D)

• Front LEDs configurable by operator:

- Power/WAN status

(link/traffic/provisioning)





(OPTIONAL)


• FTU support for

- Gas block unit (sold separately)

- WDM filter (sold separately)


i6200 Residential Media Converter



Model Uplink i6201: i6202: i6205: i6206:

BX20

BX20

BX20

BX20

LAN

1x

1x

1x

1x

USB

2x

2x

2x

CATV

1x

1x

Bottom

FTU

Patch

FTU

Patch




GPON FTTH

ONT

i5800-series

Residential ONT

The Icotera i5800 residential ONT integrates optical

Ethernet-based gigabit data transmission with Layer

2-4 functionality, VoIP, 802.11ac & bgn Wi-Fi, CATV and

USB 3.0.







Page 12

Powerful hardware platform

The Icotera i5800 fiber gateway demonstrates its great strength by bringing together a wide feature set and flawless performance. Its foundation is built on a powerful, cutting-edge dual-core architecture. This, paired with an ASIC for packet forwarding, ensures the platform is always ready to cope with additional tasks while processing VoIP, Gigabit routing of IPv4 with NAT, IPv6 and stateful filtering, traffic switching/bridging and high speed Wi-Fi.


With Wi-Fi becoming the preferred communication technology inside the home, the need for fast and stable wireless connections becomes ever more important. The i5800 delivers not only backwards compatibility with any 802.11a/b/g/n Wi-Fi certified device, but also includes the very latest standard — 802.11ac.

With the added 802.11ac solution, the i5800 is capable of delivering 867+300 Mbps and more than 650 Mbps of combined throughput in real home and office environment.


The i5800 provides exceptional Layer 2 functionality that can effortlessly handle 16 bridging instances, 16 Wi-Fi APs over 2 radios, multiple WAN interfaces, PPPoE and in-band secure management. The CATV AGC receiver offers broadband cable- television services to the subscriber with seamless monitoring and configuration of the power levels. As an optional feature, this fiber gateway offers a complete and customizable filter solution with low-pass filters for individual RF channel plans.

Ease of control

A great variety of management protocols (e.g. OMCI v2,

SNMP v1/v2, syslog, SSH, Telnet and TR-069) is integrated and supported, which guarantees effortless control over the i5800.

Paired with our fail-proof, zero-touch auto provisioning mechanism, they provide easy and trouble-free daily operations. To guarantee effortless firmware roll-outs, in harsh network environments, the i5800 series also comes with dual-bank firmware.


The i5800 GPON ONT supports the unique Icotera Smart

Home platform via state-of-the-art low-consuming wireless technology. The platform offers great solutions for end-users within Alarm & Surveillance, Energy Management and Home automation. The cloud-based platform connects to third party device-hardware, which makes the possibilities for connecting devices close to endless. For the network operator or service provider, the platform offers a unique opportunity for additional revenue streams and higher customer loyalty. The Icotera

Smart Home platform is deeply integrated into the Icotera gateway, which makes the daily use effortless and very valuable for the modern household.

i5800

Residential ONT

FEATURES




• Integrated CATV solution






NETWORK

COMMUNICATION

GPON INTERFACE

• Single mode fiber (ITU-T G.652)

SC/APC connector

• Data rate of 1.244Gbps/2.488Gbps

(US/DS)

• Wavelength : TX 1310nm, RX 1490nm

• G.984.1,2,3,4,5 compliant

• Prepared co-existence for NG-PON

• OMCIv2 G.988 compliant

• Forward Error Correction (FEC)

• Ethernet GEM support

• Multiple T-CONTs/GEM ports per device

• AES encryption

• Dying Gasp

• Class B+ optics

- Output level from +3 to +6dBm

- Receiver sensitivity -30.5dBm

LAN INTERFACE

• 4x RJ45 connectors 10/100/1000 Base

T(X)


• Auto MDI/MDX

• Jumbo packets

• 802.1x


- Short

- Open


- Cable length

LAYER 2





• 802.1p marking

• VLAN support

• Wi-Fi support





802.11ac Wi-Fi

• 2T2R MIMO



802.1x - WEP64 - WEP128 - WPA-WPA2

• Up to 8 SSIDs

• MAC filtering

• Automatic channel selection




• Beamforming

• LDPC + STBC

802.11bgn Wi-Fi

• 802.11B/G/N 2T2R MIMO



802.1x - WEP64 - WEP128 - WPA -

WPA2

• Up to 8 SSIDs

• MAC filtering

• Automatic channel selection




LAYER 3









Auto configuration PPPoE (termination)




• Protocol helpers for: SIP, FTP, TFTP

QoS

• 8 queues






USB

• 1x USB 2.0 host

• 1x USB 3.0 host

VoIP


• 5 REN support


Auto - RFC 2833


DK)

• CLIR






G.722 - G.729AB










MANAGEMENT &

MONITORING

• Shared or separate IP interface (VLAN or virtual) for management





(configurable) - Wi-Fi - PPPoE - LAN network - Port forwarding, NAT loopback, DMZ, DynDNS, Status and monitoring


TR-181 (Network)



MIB)


• Packet dumping



TFTP or TR-069



OPERATIONAL

SPECIFICATIONS



(excl. USB ports)




CATV (OPTIONAL)




• Input wave length: 1550 nm





RF PARAMETERS




• Tilt: 5 dB


OMI): 80 dBuV


96 dBuV







CASING

• Weight: 450 g

• Size: 190 x 150 x 48 mm (W x H x D)

• Front LEDs configurable by operator and/or end-user: - OLT link, Power/

WAN status (link/traffic/provisioning) - VoIP port 1 - VoIP port 2 - Wi-Fi





(OPTIONAL)


• FTU support for - Gas block unit

(sold separately) - WDM filter (sold separately)


i5800 Residential ONT



Model i5801: i5802: i5805: i5806:

Uplink

GPON

GPON

GPON

GPON

LAN

4x

4x

4x

4x

USB

2x

2x

2x

2x

POTS

2x

2x

2x

2x

CATV

1x

1x

Wi-Fi

802.11b/g/n + 802.11ac

802.11b/g/n + 802.11ac

802.11b/g/n + 802.11ac

802.11b/g/n + 802.11ac


Antennas

2x2 Int.

2x2 Int.

2x2 Int.

2x2 Int.

Bottom

FTU

Patch

FTU

Patch



Ethernet

Router

i4600-series

Residential Router

The Icotera i4600 residential ethernet router integrates Ethernet-based gigabit data transmission with Layer 2-4 functionality, VoIP, 802.11ac & bgn Wi-Fi, and USB 3.0.







Page 14

Powerful hardware architecture

The Icotera i4600 ethernet router demonstrates its great strength by bringing together a wide feature set and flawless performance. Its foundation is built on a powerful, cutting-edge dual-core architecture. This, paired with an ASIC for packet forwarding, ensures the platform is always ready to cope with additional tasks while processing VoIP, Gigabit routing of IPv4 with NAT, IPv6 and stateful filtering, traffic switching/bridging and high speed Wi-Fi.


With Wi-Fi becoming the preferred communication technology inside the home, the need for fast and stable wireless connections is becoming ever more important. The i4600 delivers not only backwards compatibility with any 802.11a/b/g/n Wi-Fi certified device, but also includes the very latest standard —

802.11ac. With the added 802.11ac solution, the i4600 is capable of delivering 867+300 Mbps and more than 650 Mbps of combined throughput in real home and office environment.


The i4600 provides exceptional Layer 2 functionality that can effortlessly handle 16 bridging instances, 16 Wi-Fi APs over 2 radios, multiple WAN interfaces, PPPoE and in-band secure management.

Ease of control

A great variety of management protocols (e.g. SNMP v1/v2, syslog, SSH, Telnet and TR-069) is integrated and supported, which guarantees effortless control over the i4600. Paired with our fail-proof, zero-touch auto provisioning mechanism, they provide easy and trouble-free daily operations. To guarantee trouble-free firmware roll-outs, in harsh network environments, the i4600 also comes with dual-bank firmware.


The i4600 ethernet router supports the unique Icotera Smart

Home platform via state-of-the-art low-consuming wireless technology. The platform offers great solutions for end-users within Alarm & Surveillance, Energy Management and Home automation. The cloud-based platform connects to third party device-hardware, which makes the possibilities for connecting devices close to endless. For the network operator or service provider, the platform offers a unique opportunity for additional revenue streams and higher customer loyalty. The Icotera

Smart Home platform is deeply integrated into the Icotera ethernet router, which makes the daily use effortless and very valuable for the modern household.

i4600

Residential Router

FEATURES









NETWORK

COMMUNICATION

WAN INTERFACE

• 1 RJ45 connector 10/100/1000 Base

T(X)

• Full-duplex transmission


• Auto MDI/MDX

LAN INTERFACE

• 4 RJ45 connectors 10/100/1000 Base

T(X)


• Auto MDI/MDX

• Jumbo packets

• 802.1x


- Short

- Open


- Cable length

LAYER 2





• 802.1p marking

• VLAN support

• Wi-Fi support




• Rate-limit per switch port


802.11ac Wi-Fi

• 2T2R MIMO



802.1x - WEP64 - WEP128 - WPA-WPA2

• Up to 8 SSIDs

• MAC filtering





• Beamforming

• LDPC + STBC


802.11bgn Wi-Fi

• 802.11B/G/N 2T2R MIMO



802.1x - WEP64 - WEP128 - WPA -

WPA2

• Up to 8 SSIDs

• MAC filtering






LAYER 3









DHCP client

• PPPoE (termination)




• Protocol helpers for: SIP, FTP, TFTP,

PPTP, L2TP and IPSec

• DNS based Parental-Control

• Guest Access

QoS

• 8 queues






USB

• 1x USB 3.0 host

• 1x USB 2.0 host

• Prepared for: Z-Wave, ZigBee, CAT-iq,

Storage, Printers

VoIP


• 5 REN support


Auto - RFC 2833


DK)

• CLIR






G.722 - G.729AB

• Codec negotiation










MANAGEMENT &

MONITORING

• Shared or separate IP interface for management





(configurable) - Wi-Fi - Guest network

- LAN network - Port forwarding, NAT loopback, DMZ, DynDNS, Status and monitoring


TR-181 (Network)



MIB)






• Packet dumping



TFTP/HTTP/FTP or TR-069



• LED brightness configurable by operator and/or End-User

• Hardware watchdog

OPERATIONAL

SPECIFICATIONS



(excl. USB ports)





CASING

• Weight: 270 g

• Size: 190 x 120 x 35 mm (W x H x D)

• Front LEDs configurable by operator and/or end-user: Power/WAN status

(link/traffic/provisioning) - VoIP port

1 - VoIP port 2 - Wi-Fi


i4600 Residential Router



Model i4601:

Uplink

RJ45

LAN

4x

USB

2x

POTS

2x

Wi-Fi

802.11b/g/n + 802.11ac


Antennas

2x2 Int.



Intelligent Gateways

Icotera A/S

Kongevejen 400D

2840 Holte

Denmark

Phone: +45 7010 0033

Mail: [email protected]

Web: www.icotera.com

© Icotera 2016

FTTH Gateway Product Catalogue

Better

Connected

Living

Intelligent Gateway and

Smart Home Solutions for

Fiber-to-the-Home Networks

About

Icotera

We aim to make our customers successful by delivering:

Quality that lasts

State-of-the-art FTTH P2P and GPON solutions, crafted with superior quality of design, components, software, and manufacturing.

Tailor-made solutions

Solutions that exceed the required standards, with multiple management systems integrated along with in-house R&D, allowing us to meet our customers’ individual needs and requirements.

Innovation platform

New and innovative applications and products that combined with high-speed Internet broadband, enhance the experience of every FTTH end-user.

24/7

Support

The highest level of in-house customer support and after-market services in the industry, enabling fast and reliable handling of feature request and day-to-day support.

Customer Testimonials

Customer Testimonials

Design that makes a difference

Unique Industrial Design

Advanced slide-on system

Multi-purpose Fiber

Termination Unit

P2P FTTH

Gateway

Residential Gateway

Residential Gateway

i6800 Residential Gateway

Configuration possibilities

P2P Layer 2

Switch

i6400-series

Residential Switch

Residential Switch

i6400 Residential Switch

Configuration possibilities

P2P Media

Converter

Residential Media Converter

Residential Media Converter

i6200 Residential Media Converter

Configuration possibilities

GPON FTTH

ONT

i5800-series

Residential ONT

Residential ONT

i5800 Residential ONT

Configuration possibilities

Ethernet

Router

Residential Router

Residential Router

i4600 Residential Router

Configuration possibilities

Intelligent Gateways

Icotera A/S

Kongevejen 400D

2840 Holte

Denmark

Phone: +45 7010 0033

Mail: [email protected]

Web: www.icotera.com

© Icotera 2016

Related manuals

Icotera

i6800

Icotera

86071

Samsung

i5800 Galaxy 3

iMAN

i6800

Icotera

IGW3000

iMAN

i5800