Amcrest AM-GL300 User manual

Amcrest AM-GL300 GPS Tracker

User Manual

Version 2.

3.0

Revised Ma y 10

, 2016

1 www.amcrestgps.com

Table of Contents

Welcome ....................................................................................................................................................... 3

Important Security Warning .......................................................................................................................... 3

Important Safeguards and Warnings ............................................................................................................. 4

Introduction .................................................................................................................................................. 5

Features .................................................................................................................................................................... 5

What’s Included ........................................................................................................................................................ 5

AM-GL300 Diagram ................................................................................................................................................... 6

Charging the Device .................................................................................................................................................. 6

AM-GL300 Power On/Off .......................................................................................................................................... 6

Activating the Device ................................................................................................................................................ 7

Device Placement ..................................................................................................................................................... 7

Amcrest GPS Portal (www.amcrestgps.com) ................................................................................................. 8

Getting Started ......................................................................................................................................................... 8

User Interface Walkthrough ...................................................................................................................................... 9

Map Tab .......................................................................................................................................................................... 9

Asset Info Tab ................................................................................................................................................................ 10

Trip Replay Tab ............................................................................................................................................................. 11

Zones Tab ...................................................................................................................................................................... 12

Alerts Tab ...................................................................................................................................................................... 14

Reports Tab ................................................................................................................................................................... 16

FAQ ............................................................................................................................................................. 18

2 www.amcrestgps.com

Welcome

Thank you for purchasing the Amcrest AM-GL300 Real-time GPS Tracker!

This user manual is designed to be a reference tool for the installation and operation of your GPS Tracker and amcrestgps.com.

Here you can find information about the tracker’s features and functions, as well as information to aid in troubleshooting.

For access to other support information, please go to http://amcrest.com/support

To contact Amcrest support, please have your IMEI or ICCID number ready and do one of the following:

●

Visit http://amcrest.com/contacts and use the email form

●

Call Amcrest Support using one of the following numbers

Toll Free: (888) 212-7538

International Callers (Outside of US): +1-713-893-8956

USA: +1-713-893-8956

Canada: 437-888-0177

UK: 203-769-2757

●

Email Amcrest Customer Support [email protected]

Important Security Warning

In order to keep your Amcrest GPS tracker secure and prevent unauthorized access, please make sure to follow the steps below:

Always make sure that your GPS tracker has the latest firmware as listed on www.amcrest.com/firmware

Change the default password after viewing your tracker on amcrestgps.com. Always ensure that your amcrestgps.com password is at least 8 characters long and contains a combination of lowercase characters, uppercase characters as well as numbers.

3 www.amcrestgps.com

Important Safeguards and Warnings

1

Electrical Safety

All installation and operation should conform to your local electrical safety codes.

The product must be grounded to reduce the risk of electric shock.

We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation.

2

Transportation Security

Heavy stress, violent vibrations, and excess moisture should not occur during transportation, storage, and installation of the device.

Do not adjust GPS tracker settings or placement while driving.

3

Repair Professionals

All the examination and repair work should be done by qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or user-attempted repair.

4

Environment

The GPS tracker should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive substances, etc.

This product should be transported, stored, and used only in the specified environments as stated above.

5.

Operation and Maintenance

To clean dust or dirt off of the GPS tracker, use an air blower or a microfiber cloth.

6.

Accessories

Be sure to use only the accessories recommended by manufacturer.

Before installation, please open the package and check to ensure that all of the components are present.

Contact the retailer that you purchased from, or Amcrest directly if anything is broken or missing in the package.

7.

Legal Notice

Ensure strict observation of relevant laws to ensure this product cannot be used for any illegal purposes. Amcrest Technologies assumes no liability or risk for misuse of this product and any consequences of said misuse.

4 www.amcrestgps.com

Introduction

The AM-GL300 is an asset tracking device designed to track people, vehicles, and other assets. With a compact body and superior receiving capabilities, the AM-GL300 is an inconspicuous, yet powerful tracking solution only slightly larger than a matchbox.

The AM-GL300 has features such as fast TTFF (Time to First Fix), Quad Band GSM frequencies (850/900/1800/190), @Track protocol based integration, GPRS/GSM based reporting, geo-fencing, and other features to ensure robust tracking capabilities.

Features

Below are the main features of the AM-GL300:

●

Real-Time Tracking

● Small Form Factor: 2” x 1” x .9”

●

Remote access via PC, Mac, iOS, or Android devices

● Rechargeable Battery with a Battery Life of Up to 2 weeks

● Receive Location and Speed Alerts by E-mail & Text Message

●

Geo-fencing Capabilities

●

1 Year Warranty

What’s Included

Included in the box with the AM-GL300 are the following:

●

AM-GL300

●

Mini USB 5V AC Power Adapter

●

SIM card information

● Quick Start Instruction Card

5 www.amcrestgps.com

AM-GL300 Diagram

Note

: The SIM card comes preinstalled in the device. Please do not remove or replace it. If you experience a problem you believe may be related to the preinstalled SIM card, please contact support.

Charging the Device

To charge the AM-GL300, lift the flap covering the charging post and plug the charger cable end into the unit via the USB port, then plug the charger into a wall outlet.

The battery LED light on the front of the GPS tracker will have a blinking

red light when charging, and the LED in the center will blink green periodically to indicate that it still has power. If the battery LED flashes red, that means the battery level is low, and the GPS tracker should be charged.

AM-GL300 Power On/Off

To turn the device on, press the Power button on the top of the device once. As the device obtains a cellular signal, the middle LED will begin blinking and will start relaying location data. To turn off the device, press and hold the Power button on the top of the device. The left-most LED light on the device is flashing blue, your tracker is trying to locate a cellular signal over which to send data.

6 www.amcrestgps.com

Activating the Device

After purchasing the device, you must purchase a monthly service plan that allows the device to send your data to your Amcrest account. You can activate your device and service plan at http://www.amcrest.com/gps-activation . If you choose to buy a second device, fill out the activation form and be sure to select ‘ADD TO EXISTING ACCOUNT’ under Activation Type.

Follow the activation steps on the site, and within 24 hours you will receive an email with details about the device, along with the username and password to log on to www.amcrestgps.com

. Change your password upon logging in for the first time and begin enjoying tracking your movements!

Device Placement

Make sure that the device is placed near a window or on a surface that does not obstruct the signal reception. Placing the device in the trunk of a car is not recommended. Move the GPS tracker near where you want to place it and check the green GPS signal to ensure that reception is available in that position. The AM-GL300 is water resistant, yet we do not recommend placing the device in a place where in may become submerged in water.

7 www.amcrestgps.com

Amcrest GPS Portal ( www.amcrestgps.com

)

www.amcrestgps.com

is the portal that allows you to track your your GPS tracker.

Getting Started

To log into the Amcrest GPS portal, check your email for your Amcrest GPS activation email containing your username and password.

For best security results, please change your password upon logging in for the first time. You can access the ‘Account Settings’ menu but clicking the downward arrow in the top right portion on the navigation bar. There you can change your password, telephone number and email address.

See below table for an explanation of each major area of the interface:

1. Menu

Tabs

2. Asset

Selection

3. Asset

List

4. Account

Settings

5. Map

Tools

Allows the user to navigate between menu items which allow for

Allows the user to select assets by type or sort through assets in the list.

Displays all assets selected by the user.

Allows users to interact with the map in a variety of ways.

Allows the user to change settings related to the account, as well as audio alerts.

8 www.amcrestgps.com

User Interface Walkthrough

This section will explore the different menu items in the GPS Portal Interface. See below for an explanation of each menu item:

Map

Asset Info

Trip Replay

Zones

Alerts

Reports

Map Tab

This tab shows the last location of the GPS tracker, as well as allows for use of many different map tools.

This tab shows the different assets associated with this account, and displays information about each device.

This tab allows the user to see trip history and play trips.

This tab allows the user to create and manage zones (geofences).

This tab allows the user to create and manage alerts.

This tab allows the user to generate reports using data collected by the device.

This tab shows the last known location of the GPS tracker, as well as allows for use of many different map tools. The map tab consists of 3 main control areas:

1.

Device List

– This section shows all of the devices associated with your account. Use the arrow buttons in the top right of this section to view more information about the current status of the device, such as raw latitude longitude and IMEI number.

2.

Last Known Location

– This area shows on the map where the GPS tracker last reported its location along with information about speed, motion status, date/time stamp and battery information.

3.

Map Tools

– This area shows the different map tools that the GPS tracker can use. From top to bottom:

Zoom in and zoom out of the map

Top icon opens geofence creation tool. Bottom icon enables measuring the distance between two points.

Opens map settings menu, which allows the user to change things such as map source and overlay displays.

9 www.amcrestgps.com

Asset Info Tab

This tab shows the different assets associated with this account, and displays information about each device.

Telemetry

- Shows telemetry data from the tracker in a pop-up window. Though it may seem confusing, the telemetry update contains all of the unprocessed data transmitted from the device to the backend servers. This information includes the latitude/longitude coordinates, time stamps, battery information device inputs from every update sent by your AM-GL300.

Recent Alerts –

Recently triggered alerts will be displayed here. The alert history here can be filtered by alert priority.

Recent Events -

Shows the most recent events for that specific asset.

Recent Trips

- Shows the most recent trips for that specific asset.

More Info –

Shows more detailed information about the device depending on how it is configured in amcrestgps.com.

10 www.amcrestgps.com

Trip Replay Tab

This tab allows the user to see trip history and play trips. This tab has 4 main areas:

Device Selector

– Select a group, then an asset and specify the date for which you want to view trip logs.

Trip Listing

– Trips are displayed here, the most recent displayed first. Click the trip to access a map, graphs, and replay controls for that trip.

Speed/Altitude Graph

– This section provides a graph that plots changes in speed and altitude. Any speed limits input for speed will be shown here.

Replay Controls

– This area allows the user to start/stop playback and change playback speed.

11 www.amcrestgps.com

Zones Tab

This tab allows the user to create and manage zones (geo-fences). Before you create a zone, you must first create a zone group. You can create a zone group by clicking the ‘

Manage Zone Groups

’ button, then clicking New Group. Name the group, then click enter.

There are 3 different types of zones:

No-Go Zone

– These zones can trigger an alarm if the tracker is detected within its boundaries.

Keep-In Zone

– These zones can trigger an alarm if the tracker is detected outside its boundaries.

Location Zone

– These zones simply mark a specific location on a map and that designated

To create a zone, click the Create Zone button at the top of the page and select which type of zone you’d like to create. Click different points on the map to create a shape, then for the last point, double click to close the zone. Once the zone is closed, name it, ensure the type is correct, select a zone group, then click Save. To access more zone settings, click Advanced.

12 www.amcrestgps.com

Note: You can also create a zone by clicking the Zone icon ( ) from either this tab, or the Map tab.

See below for a screenshot of the Advanced Zone settings with an explanation about each setting:

Name

: This field allows you to name your zone.

Type

: This field allows you to select zone type.

Group

: This field allows you to select zone group.

Max Speed

: This field dictates what the maximum speed can be within the zone before an alarm is triggered.

Proximity

: This field dictates what the proximity to the zone can be before an alarm is triggered.

Status

: This field lets you activate or deactivate zones.

Zone Area

: This field displays the zone area for the zone selected.

13 www.amcrestgps.com

Alerts Tab

This tab allows the user to create and manage alerts. To configure existing alerts, click the Actions button next to the specific alert line item to do one of the following actions: Edit Alert, Set Inactive, Delete Alert, Duplicate Alerts, or Show Results.

14 www.amcrestgps.com

Click the Create Alert button. This will permit you to create a custom alert.

Alert Details

:

Alert Name – This field allows the user to name this alert.

Priority – This field allows the user to designate a priority for this alert. High priority alerts will ‘pop up’ and sound a siren where they are triggered. Click ‘Action’ on the High Priority Alert dialog box to open alert details. High priority alerts cannot be dismissed without a comment added to the alert. If you do not wish to dismiss the alert, but want to mute the siren, simply click the megaphone icon and siren notifications for that alert will be disabled.

Alert Criteria

:

Select Asset – This field allows the user to select which asset group or asset(s) to create a custom alert for.

Select Alert Trigger – This field allows the user to select what should cause the alert. There are many alert triggers that can be selected, such as entering or exiting a zone, speeding, starting/ending a trip, or triggering an event.

Select Optional Time Periods – This field allows the user to select an optional time period (dates and times). If a time period isn’t selected, then the event applies at all times.

Other Criteria – This field allows the user to select additional criteria to use for the alarm.

Who to Notify

:

This field allows the user to select who should be notified, and how they should be notified when an alert is triggered. Either SMS or

Email alerts can be sent to specific people.

15 www.amcrestgps.com

Reports Tab

This tab allows the user to generate reports using data collected by the device. The system provides standard reports by default, but also has the ability to generate custom reports.

To generate a standard report, click the report you’d like to see, select which assets you want to include in the report, specify the report time period, then click the ‘Show Report’ button.

16 www.amcrestgps.com

To generate a custom report, click the Scheduled & Custom tab, then click the Create Report button. There are many parameters on this screen to customize. Once customized, click Save Report, and the report will be generated.

Note

: The following reports are NOT available on the AM-GL300 without I/O accessories: Engine Over Revving, Impact Event, and Harsh Cornering report

User Settings

The User Settings menu can be displayed by clicking the down arrow to the left of the megaphone icon in the top-right of the screen. Here product support contact information can quickly be found.

The ‘Help & Support’ link will open the AM-GL300 Knowledge Base. Click ‘Account Settings’ to manage time zone, change your email and password, and more.

17 www.amcrestgps.com

FAQ

Q

: I tried to activate my GPS tracker with the activation form, but never received my password. What do I do?

A

: Contact customer support at [email protected]

Q

: Why is my device not getting GPS signal?

A

: When the GPS tracker is experiencing interference, the GPS light (blue) will begin blinking. This means that no wireless signal is available and the device is actively searching for a new signal. Please bear in mind that many major cities have GPS dead zones, and

GPS signal may not reach underground.

Q

: How long does my device’s battery last?

A

: The battery should last up to 14 days, but may deplete faster if more activity is detected.

Q

: How do I know when the AM-GL300 is completely charged?

A

: In order to make the device more discreet, the AM-GL300 will show not outward indication of battery life except when it is connected to a power supply. You can view current device battery and other metrics on amcrestgps.com under the Map tab.

Q

: I just bought an additional Amcrest GPS Tracker. How can I start tracking this device if I already have an amcrestgps.com account?

A

: First, activate your GPS Tracker on [insert link]. Create a new asset and build its profile. Next, create a new Hardware device and set its linked asset to the asset profile you’ve just created.

Q

: How do I reset my Amcrest GPS Tracker?

A

: In order to reset your GPS Tracker, press and hold the thumb-sized button on the front of the device until the blue LED light begins to flash. It will automatically reconnect to the network.

Q

: Can I change how often my GPS Tracker pushes signal updates to the network?

A

: Unfortunately at this time, the Amcrest GPS Tracker only sends updates at 1-minute intervals in order to maximize the battery life of the device.

18 www.amcrestgps.com

Note:

●

This user manual is for reference only. Slight differences may be found in the user interface.

●

All the designs and software here are subject to change without prior written notice.

●

All trademarks and registered trademarks mentioned are the properties of their respective owners.

To find support for the AM-GL300, please do one of the following:

● Visit http://amcrest.com/contacts and use the email form

●

Call Amcrest Support using one of the following numbers

Toll Free US: (888) 212-7538

International Callers (Outside of US): +1-713-893-8956

USA: 713-893-8956

Canada: 437-888-0177

UK: 203-769-2757

●

Email Amcrest Customer Support [email protected]

19 www.amcrestgps.com