advertisement
Owner’s Manual
TSD-PA20VG
1x20W Global Commercial Amplifier
TSD-PA20VG
Mono 20W Power Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-PA20VG
1x20W Global Commercial Amplifier
Owner’s Manual
Description
The Atlas Sound TSD-PA20VG is a cost-effective mono amplifier for 4Ω and distributed constant voltage (25/70/100V) speaker systems. Applications such as house of worship cry rooms, hallways, restrooms, foyers, and classrooms will benefit from this compact reliable amplifier. The TSD-PA20V is also a cost-effective alternative for small projector systems as it can be used with as many as
(16) 25/70/100V ceiling speakers (tapped at 1W each), plus the extremely small footprint allows for easy mounting. For sound masking applications the TSD-PA20VG has the capacity to drive up to 34 masking speakers tapped at .5W each on a 70.7V line.
Output is gain controlled from a potentiometer on the front panel with removable knob to facilitate installation of a tamper-resistant cover (included).
The TSD-PA20VG is part of a full line of Atlas Sound Time Saving Devices. These compact
(1.5" x 4" x 5.2") units are designed to solve some of the common audio system problems in the easiest, most efficient, and cost-effective way. All models are made from high quality components and include removable individual I/O connectors for quick and precise wiring, separate ground terminals for all I/Os assuring secured connections, and removable level controls that can be replaced with tamper-resistant security covers. The TSDs are highly efficient and meet most energy standards as one 24V DC power supply (available separately) can power multiple Atlas Time Saving
Devices.
Features
• 20W Mono Amplifier
• 4Ω/25/70/100V Output
• One (1) Balanced Input
• Removable Level Control with
Set-It-And-Forget-It Security Cover
• Peak Indicator
• Input Signal Indicator
• Cable Management System
• Multiple Mounting Configurations
• Separate Ground Connections
• Removable Phoenix Style I/O Connectors
• Meets Most Energy Standards
• Compact Chassis Design
Audio Applications
• Projector Amplifier
• Zone Amplifier
• Paging Systems
Installation
• Courtrooms
• Public Forums
• Churches
• Restaurants
• Schools
• Industrial Facilities
• House of Worship
AtlasSound.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 2 –
Specifications are subject to change without notice.
Owner’s Manual
Front Panel Description
5
TSD-PA20VG
1x20W Global Commercial Amplifier
3
4
2
5 5
1
1. Input Level Control - Determines the output level at the loudspeakers on the PA20VG. Turn
clockwise to increase the signal level and counter-clockwise to decrease the level. Note: The
Input Level Control knob can be removed and replaced with a supplied security cover to prevent
unauthorized adjustment.
2. Power LED - Illuminates Blue when 24VDC power is present.
3. Signal LED - Illuminates Green when the input signal strength reaches 25mV to verify a signal
path.
4. Peak LED - Illuminates Red when the input signal reaches 3dBV below when signal clipping
will occur. Occasional flashing is normal but if this indicator is continuously On, then reduce the
input level using the Input Level Control on the front panel.
5. Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a
cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening
the screws.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-PA20VG
1x20W Global Commercial Amplifier
Rear Panel Description
4
Owner’s Manual
4
4 4
1 2 3
TSD Input/Output connections are removable for easy system wiring. The connectors have a 3.5mm pitch between pins.
1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for an
external 24VDC power supply (sold separately). Because of the TSDs low power consumption, a
single external power supply may power more than one TSD. Please refer to the specifications
on current requirements in milliamps to match with the appropriate power supply. Please observe
the polarity of the wiring to this connector. Note: It is acceptable to exceed the current
requirements of the TSDs but NOT safe to use a power supply that is below the current
requirement of the device.
2. Balanced Line Input - Connect balanced line level signals to this phoenix style connectors. Your
connection must be mated properly to the input connector or signal loss and/or noise may occur.
Note: Unbalanced line level inputs can also be used by connecting the (G) and (-) terminals
together.
3. Speaker Outputs - Connect the loudspeaker wiring to these terminals, observing the polarity
shown on the rear of the chassis. For low impedance loads, use the “COM” and 4Ω terminals.
For high impedance loads, use “COM” and the proper terminal for your system (25/70/100V). It is
recommended to keep the sum total of tapped loudspeakers to 20W.
4. Cable Management Retainer Points - Use the rear panel screws for connecting the included cable
retainers. Each TSD comes with two cable retainers for simplified cable management.
AtlasSound.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 4 –
Specifications are subject to change without notice.
Owner’s Manual
TSD-PA20VG
1x20W Global Commercial Amplifier
Knob and Security Cover
All front panel level controls feature a removable knob that can be replaced with included security covers to prevent potentiometer damage or unwanted changes.
• Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator
to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto
the potentiometer shaft. Do not force or damage may occur to the potentiometer.
• Security Cover Installation - Remove the knob from the panel and insert the cover. Do not force or
damage may occur to the potentiometer. Small pliers may be required to remove the knobs.
Mounting
There are three ways to securely mount this TSD:
1. Velcro™ - Each unit includes industrial-grade Velcro™ with adhesive backing to adhere to any
flat surface.
2. Brackets - Each unit includes two mounting brackets to secure to a cabinet or wall.
3. Rack Mount Panel - The optional TSD-RMK rack mount panel supports up to four TSDs in a
1RU space.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-PA20VG
1x20W Global Commercial Amplifier
Block Diagram
INPUT SIGNAL
LED
PEAK
LED
LEVEL
AMP 20W
Owner’s Manual
OT
100V
70V
4 ohm
COM
DC24V IN
DC OUT
POWER LED
Specifications
Description
Chassis Color
Chassis Material
Power Output
Input
Type
Connection
Impedance
Line Input Level
Output
Output Taps
Type
Connection
Wire Size
1 x 20W Global Commercial Amplifier
Black
Aluminum
20W @ 4Ω, 10W @ 8Ω, 20W @ 25/70.7/100V Loads
Qty 1, Balanced Line
Removable 3 Position Captive Screw 3.5mm Spacing
10KΩ Balanced, 5KΩ Unbalanced
500mV (-6dBV) Balanced
4Ω, 25V, 70V, 100V
Speaker Output
Removable 5 Position Captive Screw 5mm Spacing
14 Gauge Max Wire Size
Controls
Level Control Qty 1, Removable Knob with Security Cover
Indicators
Input Signal
Peak
Green, 25mV On Threshold
Red, -3dB Before Clip
Power Blue
AtlasSound.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 6 –
Specifications are subject to change without notice.
Owner’s Manual
TSD-PA20VG
1x20W Global Commercial Amplifier
Electrical
Frequency Response
THD
Signal to Noise
40Hz - 20kHz (±3dB)
15% @ 1kHz
78dB
Mounting
Velcro™
Brackets
TSD-RMK
Cable Retainer
Industrial-Grade, Included
Qty 2, Included
Optional 1 RU Rack Mount Panel (Supports 4 TSD Units)
Qty 2, Included
Power Requirements Note: All Current and Watt data is based on AC power consumption using the TSD-PS24V2500mA Power Supply.
Load Taps 4Ω, 25V = 31Ω Load, 70V = 250Ω Load, 100V = 500Ω Load
Voltage 24VDC
Idle Current
Idle VA Watts
Average Current
Average VA Watts
Max Current
Max VA Watts
50mA
1.2W
160mA
3.8W
490mA
11.7W
Dimensions H 1.5" (39mm) x W 4" (101mm) x D 5.2" (132mm)
6oz, .165kg
Weight
Accessories
TSD 24VDC Power Supplies
TSD-RMK 1 RU Rack Panel
Safety and Certifications
External Power Supply cUL, CE, RoHS, TUV
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-PA20VG
1x20W Global Commercial Amplifier
Owner’s Manual
Limited Warranty
All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for a period of three years on all Atlas Sound products, including SOUNDOLIER brand, and ATLAS
SOUND brand products except as follows: one year on electronics and control systems; one year on replacement parts; and one year on Musician Series stands and related accessories. Additionally, fuses and lamps carry no warranty. Atlas Sound will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed in other than a workman like manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to Atlas Sound do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any nonwarranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges collect.
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL
DAMAGES FOR PERSONAL INJURY, ATLAS SOUND SHALL NOT BE LIABLE IN TORT OR CONTRACT
FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE
INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF
ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Atlas Sound does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Service
Should your Atlas TSD require service, please contact the Atlas Sound warranty department at 1-877-689-8055, ext. 1274 to obtain an RA number.
Atlas Sound Tech Support can be reached at 1-800-876-3333.
Visit our website at www.AtlasSound.com to see other Atlas products
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P.
All other trademarks are the property of their respective owners. ATS004054 RevB 12/11
AtlasSound.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 8 –
Specifications are subject to change without notice.
advertisement
Related manuals
advertisement