SE GLOBAL MACHINERY ENGINEERING PTE LTD Vibratory Hammer Rated Capacity Indicator System Operation Procedure

SE GLOBAL MACHINERY ENGINEERING PTE LTD
12N ENTERPRISE ROAD, ENTERPRISE 10, SINGAPORE 627693
TEL: 68966788 FAX: 68966588 EMAIL: [email protected]
Co. / GST Reg. No: 201400799M WEBSITE: www.seglobal.com.sg
SAFELIFT BZ300 Rated Capacity Indicator system
allow the operator to monitor the load and working
radius for the excavator thus ensuring that lifted
load is within safe working load (SWL).
SE GLOBAL LCD Display Control Box, the first in Singapore
to produce LCD display for Hydraulic vibratory hammer.
-
CLAMP Open / Close
SWING Left / Right
AUTO CLAMP On / Off
-
On/Off Switch
First Speed Button
VIBRO HIGH SPEED
Display shows the image with camera
installed at the rear to allow the
operator to reverse safely, provides
good visibility for blind spot when
turning the machine thus reducing the
risk of accidents.
(L)
Always ensure that the knob is turn to
the bucket sign before using the vibrosystem. Adjust the vibro-hammer to
high speed using the switch as shown
in the picture above.
(R)
(D)
(R)
(L)
(D)
Left-hand Joystick
Left Button (L) – Vibro rotate left
Right Button (R) – Vibro rotate right
Down Button (D) – Horn
Wide Field of View Liberates the Operator
The front field of view easily while the peripheral view
reduces blind spots to a minimum. Reinforced green glass
windows meet European standards
Right-hand Joystick
Left Button (L) – Vibro clamp close
Right Button (R) – Vibro clamp open
Down Button (D) – Vibro auto clamp
">