Ford S-Max/Galaxy Automobile Electronic Parking Brake User Manual
Below you will find brief information for S-Max, Galaxy. This manual provides instructions on manual release and service mode activation for the electronic parking brake (EPB) system fitted to Ford S-Max/Galaxy models from 2006-2008. It outlines the required preconditions and step-by-step procedures for both service mode activation (EPB off) and de-activation (EPB on).
Advertisement
Advertisement
Advertisement
Key features
Manual EPB release
Service mode activation
Service mode de-activation
Step-by-step instructions
Safety preconditions
Frequently asked questions
Release the parking brake, switch ignition ON (pos 2), press and hold down throttle pedal and parking brake switch, switch ignition Off (pos 0), switch ignition ON (pos 2) within 5 seconds, when parking brake is fully actuated (off) switch ignition OFF (pos 0), release throttle pedal and parking brake switch.
Switch ignition ON (pos 2), press and hold down throttle pedal, lift and hold the parking brake switch, switch ignition Off (pos 0), switch ignition ON (pos 2) within 5 seconds, when parking brake is fully actuated (on) switch ignition OFF (pos 0), release throttle pedal and parking brake switch.
The vehicle should be on level ground, and the vehicle battery should be fully charged.