OKI C9800hdn Software Installation Manual

PDF

Dokumentas

Reklama

About the

Documentation

This manual is part of a set of Fiery Network Controller for C9800, herein referred to as the “Fiery,” documentation that includes the following manuals for users and system administrators. Most are available as Acrobat PDF (Portable Document Format) files on the User Documentation CD.

• The User Software Installation Guide describes how to install software from the

User Software CD to enable users to print to the Fiery Network Controller for

C9800 with the EFI PostScript driver, and also describes setting up printing connections to the Fiery.

• The Configuration Guide explains basic configuration and administration of the Fiery for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0/2000/Server 2003, and Novell

NetWare servers to provide printing services to users.

• The Printing Guide describes the printing features of the Fiery for users who send jobs from their computers using the EFI PostScript driver.

• The Color Guide provides information on managing the color output of the Fiery.

It explains how to calibrate your Fiery and take advantage of the ColorWise ® color management system, as well as features in ColorWise Pro Tools ™ .

• The

Fiery color Reference

addresses concepts and issues associated with managing color output of the Fiery and outlines key workflow scenarios. In addition, it offers information on printing color documents from popular Microsoft Windows and

Apple Mac OS applications.

• The Job Management Guide explains the functions of the job management utilities, including Command WorkStation ™ , Command WorkStation LE ™ , and

DocBuilder Pro ™ , and how you can use them to monitor and control jobs on the

Fiery. This manual is intended for an operator or administrator, or a user with the necessary access privileges, who monitors and manages job flow, performs color calibration, and troubleshoots problems that may arise.

C9800 EFI User Software Installation Guide

P/N 59374801, Revision 1.0

May 2005

Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki.

While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein.

The most up-to-date drivers and manuals are available from the Oki web site:

http://www.okidata.com and http://my.okidata.com

This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Electronics for Imaging, Inc. Information in this document is subject to change without notice and does not represent a commitment on the part of Electronics for Imaging, Inc. or OKI Printing Solutions.

This publication is provided in conjunction with an OKI Printing Solutions product (the “Product”) which contains EFI software (the “Software”). The Software is furnished under license and may only be used or copied in accordance with the terms of the Software license set forth below.

This product may be covered by one or more of the following U.S. Patents:þ 4,716,978, 4,828,056, 4,917,488, 4,941,038, 5,109,241, 5,170,182, 5,212,546,

5,260,878, 5,276,490, 5,278,599, 5,335,040, 5,343,311, 5,398,107, 5,424,754, 5,442,429, 5,459,560, 5,467,446, 5,506,946, 5,517,334, 5,537,516,

5,543,940, 5,553,200, 5,563,689, 5,565,960, 5,583,623, 5,596,416, 5,615,314, 5,619,624, 5,625,712, 5,640,228, 5,666,436, 5,745,657, 5,760,913,

5,799,232, 5,818,645, 5,835,788, 5,859,711, 5,867,179, 5,940,186, 5,959,867, 5,970,174, 5,982,937, 5,995,724, 6,002,795, 6,025,922, 6,035,103,

6,041,200, 6,065,041, 6,112,665, 6,116,707, 6,122,407, 6,134,018, 6,141,120, 6,166,821, 6,173,286, 6,185,335, 6,201,614, 6,215,562, 6,219,155,

6,219,659, 6,222,641, 6,224,048, 6,225,974, 6,226,419, 6,238,105, 6,239,895, 6,256,108, 6,269,190, 6,271,937, 6,278,901, 6,279,009, 6,289,122,

6,292,270, 6,299,063, 6,310,697, 6,321,133, 6,327,047, 6,327,050, 6,327,052, 6,330,071, 6,330,363, 6,331,899, 6,340,975, 6,341,017, 6,341,018,

6,341,307, 6,347,256, 6,348,978, 6,356,359, 6,366,918, 6,369,895, 6,381,036, 6,400,443, 6,429,949, 6,449,393, 6,476,927, 6,490,696, 6,501,565,

6,519,053, 6,539,323, 6,543,871, 6,546,364, 6,549,294, 6,549,300, 6,550,991, 6,552,815, 6,559,958, 6,572,293, 6,590,676, 6,606,165, 6,633,396,

6,636,326, 6,643,317, 6,647,149, 6,657,741, 6,662,199, 6,678,068, RE33,973, RE36,947, D341,131, D406,117, D416,550, D417,864, D419,185,

D426,206, D439,851, D444,793.

Trademarks

Auto-Count, ColorCal, ColorWise, Command WorkStation, EDOX, EFI, Fiery, the Fiery logo, MicroPress, Printcafe, PrinterSite, Prograph, Proteus, and

Spot-On are registered trademarks of Electronics for Imaging, Inc., in the U.S. Patent and Trademark Office and/or certain other foreign jurisdictions. Bestcolor is a registered trademark of Best GmbH in the U.S. Patent and Trademark Office.

AutoCal, Digital StoreFront, DocStream, Fiery Link, FreeForm, Hagen, Intelligent Device Management, Logic, OneFlow, PrintFlow, PrintMe, PrintSmith Site,

PrintSmith, PSI Flexo, PSI, SendMe, Splash, VisualCal, the EFI logo, Essential to Print are trademarks of Electronics for Imaging, Inc. Best, the Best logo,

Colorproof, PhotoXposure, Remoteproof, and Screenproof are trademarks of Best GmbH. Oki and OKI Printing Solutions are trademarks of Oki Data Corp. Ltd.

All other terms and product names may be trademarks or registered trademarks of their respective owners, and are hereby acknowledged.

Legal Notices

APPLE COMPUTER, INC. (“APPLE”) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE APPLE

SOFTWARE. APPLE DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE

RESULTS OF THE USE OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS,

OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU.

THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY

TO YOU.

IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,

INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF

BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Apple’s liability to you for actual damages from any cause whatsoever, and regardless of the form of the action (whether in contract, tort [including negligence], product liability or otherwise), will be limited to $50.

PANTONE® Colours displayed in the software application or in the user documentation may not match PANTONE-identified standards.þ Consult current

PANTONE Colour Publications for accurate colour. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc. © Pantone, Inc., 2001.

Pantone, Inc. is the copyright owner of colour data and/or software which are licensed to Electronics for Imaging, Inc.,þto distribute for use only in combination with the products, or software of Electronics for Imaging, Inc. PANTONE Colour Data and/or Software shall not be copied onto another disk or into memory except as part of the delivery of the Electronics for Imaging, Inc., products or software.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/).

FCC Information

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

Class B Declaration of Conformity

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

Industry Canada Class B Notice

This Class B digital apparatus complies with Canadian ICES-003.

Avis de Conformation Classe B de l’Industrie Canada

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

RFI Compliance Notice

This equipment has been tested concerning compliance with the relevant RFI protection requirements both individually and on system level (to simulate normal operation conditions). However, it is possible that these RFI Requirements are not met under certain unfavorable conditions in other installations. It is the user who is responsible for compliance of his particular installation.

Dieses Gerät wurde sowohl einzeln als auch in einer Anlage, die einen normalen Anwendungsfall nachbildet, auf die Einhaltung der Funkentstörbestimmungen geprüft. Es ist jedoch möglich, dass die Funkentstörbestimmungen unter ungünstigen Umständen bei anderen Gerätekombinationen nicht eingehalten werden.

Für die Einhaltung der Funkentstörbestimmungen einer gesamten Anlage, in der dieses Gerät betrieben wird, ist der Betreiber verantwortlich.

Compliance with applicable regulations depends on the use of shielded cables. It is the user who is responsible for procuring the appropriate cables.

Die Einhaltung zutreffender Bestimmungen hängt davon ab, dass geschirmte Ausführungen benützt werden. Für die Beschaffung richtiger Ausführungen ist der

Betreiber verantwortlich.

Software License Agreement

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS SOFTWARE. IF YOU DO NOT

AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. INSTALLING OR USING THE

SOFTWARE INDICATES THAT YOU AGREE TO AND ACCEPT THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ACCEPT

THE TERMS OF THIS AGREEMENT YOU MAY RETURN THE UNUSED SOFTWARE FOR A FULL REFUND TO THE PLACE OF PURCHASE.

License

EFI grants you a non-exclusive license to use the Software and accompanying documentation (“Documentation”) included with the Product. The Software is licensed, not sold. You may use the Software solely for your own customary business or personal purposes. You may not rent, lease, sublicense or lend the Software or use the Software in any time sharing, service bureau, or similar arrangement.

You may not make or have made, or permit to be made, any copies of the Software or portions thereof, except one (1) copy for backup or archive purposes in support of your use of the Software as permitted hereunder. You may not copy the Documentation. You may not attempt to localize, translate, disassemble, decompile, decrypt, reverse engineer, discover the source code of, modify, create derivative works of, or in any way change any part of the Software.

The terms, conditions, and restrictions in the License Agreement apply to all bug fixes, patches, releases, release notes, updates, and upgrades related to the

Software.

Proprietary Rights

You acknowledge and agree that all rights, title and interest, including all intellectual property rights, in and relating to the Software, Documentation and all modifications and derivative works thereof are solely owned by and shall remain with EFI and its suppliers. Except for the express limited license granted above to use the Software, no right or license of any kind is granted. You receive no rights or license under any patents, copyrights, trade secrets, or trademarks (whether registered or unregistered). You agree not to adopt, register, or attempt to register any EFI trademark or trade name (“EFI Mark”) or any confusingly similar mark,

URL, internet domain name, or symbol as your own name or the name of your affiliates or products, and not to take any other action which impairs or reduces the trademark rights of EFI or its suppliers.

Confidentiality

The Software is confidential, proprietary information of EFI and you may not distribute or disclose the Software. You may, however, permanently transfer all of your rights under this Agreement to another person or legal entity provided that: (1) such a transfer is authorized under all applicable export laws and regulations, including the U.S. Export Administration Regulations, (2) you transfer to the person or entity all of the Software and Documentation (including all copies, updates, upgrades, prior versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies of the Software and

Documentation, including copies stored on a computer; and (4) the recipient agrees to the terms and conditions of this Agreement.

Remedies and Termination

Unauthorized use, copying, or disclosure of the Software, or any breach of this Agreement will result in automatic termination of this license and will make available to EFI other legal remedies. In the event of termination, you must destroy all copies of the Software, Documentation, and all component parts thereof. All provisions of this Agreement relating to disclaimers of warranties, limitation of liability, remedies, damages, governing law, jurisdiction, venue, and EFI’s proprietary rights shall survive termination.

Limited Warranty and Disclaimer

EFI warrants to the original purchaser (“Customer”) for thirty (30) days from the date of original purchase from EFI or its authorized retailer that the Software will perform in substantial conformance to the Documentation when the Product is used as authorized by EFI’s specifications. EFI warrants the media containing the Software against failure during the above warranty period. EFI makes no warranty or representation that the Software will meet your specific requirements, that the operation of the Software will be uninterrupted, secure, fault-tolerant, or error free, or that all defects in the Software will be corrected. EFI makes no warranty, implied or otherwise, regarding the performance or reliability of any third party products (software or hardware. THE INSTALLATION OF ANY

THIRD PARTY PRODUCTS OTHER THAN AS AUTHORIZED BY EFI WILL VOID THIS WARRANTY. IN ADDITION, USE, MODIFICATION,

AND/OR REPAIR OF THE PRODUCT OTHER THAN AS AUTHORIZED BY EFI WILL VOID THIS WARRANTY.

EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EFI

MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS ON THE SOFTWARE, EXPRESS, IMPLIED, STATUTORY, OR IN ANY

OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH YOU, AND EFI SPECIFICALLY DISCLAIMS ANY IMPLIED

WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD

PARTY RIGHTS.

Limitation of Liability

TO THE MAXIMUM EXTENT PERMITTED BY LAW, EFI AND ITS SUPPLIERS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING

LOSS OF DATA, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES

ARISING FROM THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE OR FAILURE OF THE SOFTWARE, HOWEVER CAUSED

AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF EFI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE. YOU ACKNOWLEDGE THAT THE PRICE OF THE PRODUCT REFLECTS THIS ALLOCATION OF RISK. BECAUSE SOME

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES,

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

You are hereby notified that Adobe Systems Incorporated, a Delaware corporation located at 345 Park Avenue, San Jose, CA 95110-2704 (“Adobe”) is a thirdparty beneficiary to this agreement to the extent that this agreement contains provisions which relate to your use of any software, font programs, typefaces, and/or trademarks licensed or supplied by Adobe. Such provisions are made expressly for the benefit of Adobe and are enforceable by Adobe in addition to EFI. ADOBE

WILL HAVE NO LIABILITY WHATSOEVER TO YOU FOR ANY ADOBE SOFTWARE OR TECHNOLOGY LICENSED HEREUNDER.

Export Controls

EFI’s Products are subject to U.S. export laws and regulations, including the U.S. Export Administration Regulations, as well as foreign export laws and regulations.

You agree that you will not use, distribute, transfer, export, or re-export any portion of the Product or the Software in any form in violation of any applicable laws or regulations of the United States or the country in which you obtained them.

U.S. Government Restricted Rights:

Use, duplication, or disclosure of the Software by the United States Government is subject to restrictions as set forth in FAR 12.212 or DFARS 227.7202-3 -

227.7202-4 and, to the extent required under U.S. federal law, the minimum restricted rights as set out in FAR 52.227-14, Restricted Rights Notice (June 1987)

Alternate III(g)(3)(June 1987) or FAR 52.227-19 (June 1987). To the extent any technical data is provided pursuant to the Agreement, such data is protected per

FAR 12.211 and DFARS 227.7102-2 and to the extent explicitly required by the U.S. Government, is subject to limited rights as set out in DFARS 252.227.7015

(November 1995) and DFARS 252.227-7037 (September 1999). In the event that any of the above referenced agency regulations are modified or superceded, the subsequent or equivalent regulation shall apply. The name of the Contractor is Electronics for Imaging.

General

The rights and obligations of the parties related to this Agreement will be governed in all respects by the laws of the State of California exclusively, as such laws apply to contracts between California residents performed entirely within California. The United Nations Convention on Contracts for the International Sale of

Goods and any other similar convention does not apply to this Agreement. For all disputes related to this Agreement, you consent to the personal and exclusive jurisdiction and venue of the state courts in San Mateo County, California and the federal court for the Northern District of California. This Agreement is the entire agreement held between us and supersedes any other communications or advertising with respect to the Software. If any provision of this Agreement is held invalid, such provision shall be deemed modified to the extent necessary to be enforceable and the other provisions in this Agreement shall continue in full force and effect.

If you have any questions, please see EFI’s web site at www.efi.com.

Electronics for Imaging

303 Velocity Way

Foster City, CA 94404

About the Documentation

Introduction

About this manual

Fiery WebTools

System requirements

Chapter 1: Installing User Software on a Windows Computer

Setting up PostScript or PCL printing with Windows 98/Me

Installing the PostScript or PCL printer driver for Windows 98/Me

Configuring installed options

Completing the Windows 98/Me printer connection

Setting up PostScript or PCL printing with Windows NT 4.0

Installing the PostScript or PCL printer driver for Windows NT 4.0

Configuring installed options

Completing the Windows NT 4.0 printer connection

Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Installing the PostScript or PCL printer driver for Windows 2000/XP/Server 2003

Configuring installed options

Completing the Windows 2000/XP/Server 2003 printer connection

Installing EFI Fiery Mail Port

Installing Fiery utilities

Using Fiery utilities for the first time

Configuring the connection for Fiery utilities

Configuring the connection for Command WorkStation

Installingcolor files from the User Software CD

Installing the ICC profiles on a Windows computer

Loading the monitor settings file

Loading the ICC printer device profile

1-27

1-29

1-31

1-40

1-46

1-49

1-51

1-55

1-56

1-58

1-17

1-19

viii Contents

Installing the printer description files for Windows

2-14

2-15

2-16

2-17

ix About this manual

Introduction

This manual describes how to install user software for the Fiery Network

Controller for C9800 and how to set up printing from Microsoft Windows and

Apple Mac OS computers. For information about setting up network servers and clients to use the Fiery, see Chapter 2 of the Configuration Guide. For general information on using your computer, application software, or network, see the manuals that accompany those products.

OTE

The term “Fiery” is used in this manual to refer to the Fiery Network Controller for C9800. The name “Aero” is used in illustrations to represent the Fiery. The term

“Windows” is used to refer to Windows 98, Windows Me, Windows NT 4.0,

Windows 2000, Windows XP, and Windows Server 2003, wherever appropriate.

The Fiery includes support for Fiery WebTools ™ and software for Command

WorkStation, which enables an operator to manage all jobs sent to the Fiery.

Although it may not be the case at all sites, the documentation for this product assumes the presence of an operator who controls and manages jobs sent by users from remote workstations.

About this manual

This manual covers the following topics:

• Installing printer files on Windows and Mac OS computers

• Setting up printing connections on Windows and Mac OS computers

• Installing Fiery ® utilities and other user software on Windows and Mac OS computers

x Introduction

Fiery WebTools

Fiery WebTools allow you to manage your Fiery remotely from the Internet or from your company’s intranet. You access Fiery WebTools from the Fiery WebTools home page.

Fiery WebTools

Status

WebLink

Summary

Shows you the jobs currently processing and printing.

Provides a link to another web page, provided you have a valid Internet connection.

For more information

See Chapter 8 of the

Printing Guide.

See the Printing Guide

Chapter 8 and the

Configuration Guide

Chapter 6.

See the Printing Guide.

WebDownloader Allows you to download PostScript,

PCL, EPS, and PDF files to the Fiery.

WebSetup

(Windows only)

Allows you to modify the Fiery configuration (Setup) remotely. This function requires the Administrator password, if one has been set.

See the Configuration Guide.

xi System requirements

System requirements

To install the Fiery user software on a Windows or Mac OS computer, the computer must be equipped with a built-in or external CD-ROM drive. The following table lists the minimum system requirements.

Minimum requirements for

Operating system

Windows 98/Me

Windows 98/Me

Windows NT 4.0

Windows NT with

NT Service Pack 6

Windows 2000/

XP/Server 2003

Mac OS

Windows 2000 with

Service Pack 4

Windows XP with

Service Pack 1

Windows Server

2003 Standard

Edition, Enterprise

Edition, or

Datacenter Edition, all the 32-bit version

(printer driver only supported)

Mac OS 8.6 to 9.2

Mac OS X 10.1 to

10.3 Classic Mode

Mac OS X 10.2.1 or higher Native Mode

Memory for printing and Fiery utilities (Fiery Downloader

™

ColorWise Pro Tools, and

Fiery Spooler [Mac OS only])

8MB of RAM for printing

128MB of RAM for printing and utilities

Networking protocol IPX/SPX, TCP/IP, or AppleTalk

32MB of RAM for printing

64MB of RAM for utilities

AppleTalk (Ether

Talk supported)

TCP/IP (required for MAC OS X 10.2 or later)

xii Introduction

Minimum requirements for

Networking protocol for

Fiery

utilities

PostScript printer driver

PCL printer driver

Fiery WebTools

™

Windows 98/Me Windows NT 4.0

Windows 2000/

XP/Server 2003

Mac OS

TCP/IP TCP/IP (required for MAC OS X 10.2 or later) (EtherTalk supported)

OTE

: AppleTalk can be used for Fiery

Downloader. Fiery

WebTools

™

is supported with

Classic Mode only.

Adobe PostScript

Printer Driver for

Windows (included with user software)

Adobe PostScript

Printer Driver for

Windows NT

(included with user software)

Microsoft PostScript

Printer Driver for

Windows 2000/XP/

Server 2003

(included with

Windows 2000/XP/

Server 2003 operating systems)

The PostScript

Printer Description

(PPD) files for

Windows XP are provided for

Windows Server

2003

Adobe PostScript

Printer Driver

(included with user software)

PCL Printer Driver for Windows only (included on CD1)

• Java-enabled web browser:

Internet Explorer v5.5 or higher with SP2 (Windows 98/Me/NT 4.0/2000)

Internet Explorer v6.0 (Windows 2000/XP/Server 2003)

Internet Explorer v5.0 for Mac OS

OTE

: Microsoft releases frequent updates to its browsers. As support cannot be guaranteed for all versions, use the versions specified for best results.

• A monitor and video memory that supports 16-bit color at a minimum resolution of 800 x 600

• A TCP/IP-enabled network and the IP address or DNS name of the Fiery

• Web Services enabled on the Fiery

xiii System requirements

Minimum requirements for

Command WorkStation

(Windows only)

Windows 98/Me Windows NT 4.0

Windows 2000/

XP/Server 2003

• Windows-based computer with a 200-MHz or greater

Pentium processor

• 60MB of available hard disk space for installation

• At least 2 x

CD-ROM drive

• A monitor that supports 16-bit color at a minimum resolution of 1024 x 768

• 128MB of RAM

• Video adapter card with 2MB of video memory

• TCP/IP networking protocol installed

Command WorkStation LE

(Mac OS X Native Mode)

DocBuilder Pro (available as an option) on Command

WorkStation (Windows only)

Parallel port

Mac OS

—

• 300MHz Apple Macintosh G3

• 128MB RAM

• 80MB hard disk space (installation)

• 500MB hard disk space—recommended for generating full previews of raster files and handling large PS/PDF files

• Operating system—MAC 10.2.4 or later

• Java for Mac OS X—Java 2 Platform, Standard Edition, version 1.3.1

OTE

: More system resources (RAM and hard disk space) and a faster processor will lead to better system performance.

— In addition to requirements for Command WorkStation:

• Windows-based computer with 333-MHz Pentium processor

• 90MB of available hard disk space

• Dongle to be installed on parallel port for every client workstation

24MB of RAM 32MB of RAM 64MB of RAM

Other Network Requirements

UNIX (TCP/IP) workstation • Standard TCP/IP connectivity (for example, Sun SPARCStation or Silicon Graphics workstation with Solaris version 2.5 or later, or SunOS version 4.1.x software)

• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)

IPX (Novell) network • Novell server

• Novell NetWare software version 4.x or 5.x

• NDPS gateway in Netware 5.x

• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types

xiv Introduction

1-1

Chapter 1:

Installing

User Software on a Windows

Computer

This chapter describes the procedures for installing software and setting up printing from a computer using a supported version of Windows (Windows 98/Me, NT 4.0,

2000, XP or Server 2003).

The general steps for installing the software are as follows:

• Install the PostScript printer driver or PCL printer driver and corresponding printer driver files and set up the printer driver to communicate with the C9800.

• Install Fiery utilities and user software—EFI Fiery Mail Port, Fiery Remote Scan,

Fiery Downloader, Fiery Printer Delete Utility, ColorWise Pro Tools, and

Command WorkStation.

OTE

If the computer is not intended to be used by the C9800 administrator,

Command WorkStation may not be required.

• Configure the connection for Fiery utilities and user software.

• Copy additional files from CD1 as required.

1-2 Installing User Software on a Windows Computer

Setting up PostScript or PCL printing with

Windows 98/Me

To set up the Fiery as a PostScript or PCL printer, you must install the PostScript or

PCL printer driver for Windows 98/Me and, for PostScript, the corresponding printer description file. You must also configure either a local connection for printing directly or a network connection for printing over the network.

If you are printing using SMB (Server Message Block), you can connect to the Fiery

and install the printer drivers in a single procedure. For more information, see “Setting up SMB printing with Windows 98/Me” on page 1-14.

OTE

The procedures for setting up printing with the PostScript and PCL printer drivers are similar. Either can, and should, be installed using the Installer program on

CD1 supplied with the C9800.

Installing the PostScript or PCL printer driver for

Windows 98/Me

The following procedure describes installing the printer driver from CD1. Subsequent procedures describe configuring installable options and setting up the printer connection.

OTE

It is strongly recommended that you use the supplied Drivers CD (CD1) to install the printer drivers. This will automatically also install the OKI LPR utility, which greatly simplifies network connection to the printer over a TCP/IP connection.

If you choose to use the standard Windows Add Printer Wizard, you will need to install this utility from the CD afterwards if you require these features.

O INSTALL THE

OST

CRIPT OR

PCL

PRINTER DRIVER

FOR

INDOWS

98/M

Insert CD1 into your CD drive and wait for the CD to autorun the setup program.

If the CD does not autorun navigate to the CD root directory and double-click the setup.exe program to start the installer.

1-3 Setting up PostScript or PCL printing with Windows 98/Me

Choose your preferred language for the installer from the drop-down list.

From the next screens after accepting the licensing agreement, follow the on-screen instructions to complete the driver installation.

You can run this procedure twice if you want more than one driver installed. For example, if you want the EFI PostScript driver and the PCL driver run the procedure once for each driver and choose the required driver each time. Choose a name for the installed driver that will indicate which driver and printer it is for.

For networked printers the installer will also install the OKI LPR program, which makes connecting the printer over TCP/IP networks easy, and the Network Extension, which enables the driver to query the printer and automatically enable any optional hardware installed on it.

For the Fiery PS driver the installer will also install the Job Monitor utility so that you can monitor the status of the printer and your print jobs directly from the Windows desktop.

1-4 Installing User Software on a Windows Computer

When driver installation is complete you may wish to install other software utilities from the main installer screen. Information about each is available on the installer screen.

1-5 Setting up PostScript or PCL printing with Windows 98/Me

Configuring installed options

After you have completed the printer driver installation, you may configure the driver for the optional hardware installed on the C9800. This allows the driver to take advantage of these options. You can configure the options manually or, for TCP/IP network connections, you can use the Two-Way Communication feature to configure the options automatically.

Configuring installed options manually

The following procedure describes how to manually configure the Fiery for the options installed on the printer.

O CONFIGURE OPTIONS MANUALLY FOR

INDOWS

98/M

Click Start, choose Settings, and then choose Printers.

Right-click the appropriate printer icon and choose Properties from the context menu.

Click the Installable Options (PS) or Device Options (PCL) tab.

Select an installed option from the Available Options list.

In the PS driver click Add to move the option to the Installed Options list. This is not necessary in the PCL driver.

Click Apply, and then click OK.

PCL

1-6 Installing User Software on a Windows Computer

Configuring installed options and updating print options settings automatically

If you have a TCP/IP-enabled network, you can automatically update your printer driver to reflect the options currently installed on the printer. When the printer driver is first installed, the options have default settings that were set up in Fiery Setup or

ColorWise Pro Tools. When you update the printer driver with the Two-Way

Communication feature, you allow the Fiery to complete the actual setting.

The Two-Way Communication feature also updates Expert Color Settings options to reflect the current color settings on the Fiery. To access the Expert Color Settings options, click the Expert Settings tab in the ColorWise print option bar of the Fiery printing tab of your PS printer driver. For more information, see Chapter 1 of the

Color Guide.

O CONFIGURE INSTALLED OPTIONS AND UPDATE PRINT OPTIONS

SETTINGS AUTOMATICALLY FOR

INDOWS

98/M

In the Installable Options (PS) or Device Options (PCL) tab, select Two-Way

Communication.

PS PCL

Type the C9800’s IP address or DNS name.

In the PS driver, to display the C9800’s current default settings when opened, select

Update Fiery Driver When Opened.

Click Update.

1-7 Setting up PostScript or PCL printing with Windows 98/Me

In the PS driver, to receive an e-mail notification after your job has been printed, select Enable E-mail Notification, and type in the e-mail address to which notification should be sent.

You will also receive e-mail notification of any errors that occur during printing.

OTE

Enable E-mail Notification is displayed only if Email Service is enabled at Setup.

Click OK.

Completing the Windows 98/Me printer connection

To print from Windows 98/Me, you should already have set up network servers, if any, and set up the Fiery to accept print jobs from your computer.

To complete the Windows 98/Me connection, you must configure a connection on each Windows computer for the network.

Completing the Windows 98/Me parallel port connection

Preparing a parallel port connection for Windows 98/Me requires specific BIOS settings on your computer, and specific port and printer settings for Windows 98/Me.

In addition, the administrator may need to change the parallel port timeout in Fiery

Setup if you choose to spool files to the Fiery, rather than print directly.

O PREPARE THE

IERY AND YOUR COMPUTER

FOR PARALLEL PORT PRINTING

Connect the Fiery to the parallel port on your computer.

For instructions, see Chapter 1 of the Configuration Guide.

In Network Setup > Port Setup > Parallel Port Setup on the C9800 Control Panel, set

Enable Parallel Port to Yes.

For more information about Fiery Setup, see Chapter 4 of the Configuration Guide.

If you want to spool files to the Fiery, set Port Timeout in Seconds to 10.

If you want to print directly to the Fiery, set Port Timeout in Seconds to 5.

1-8 Installing User Software on a Windows Computer

In your computer’s BIOS settings, set Parallel Port Mode to ECP.

To access the BIOS settings, restart the computer and press the key indicated on your monitor as soon as the computer starts up. You may have to scroll through several menus to reach the parallel port settings. After setting the Parallel Port Mode to ECP, save your changed setting and exit.

O PREPARE THE PRINTER FOR PARALLEL PORT PRINTING

Click Start, choose Settings, and then choose Printers.

Click the appropriate printer icon and choose Properties from the File menu.

Click the Details tab, and in the “Print to the following port” menu, select

LPT 1: (ECP Printer Port).

OTE

Check this selection carefully. It may read LPT 1: (Printer Port), which is not equivalent to LPT 1: (ECP Printer Port).

If this box does not read LPT 1: (ECP Printer Port), change the port setting now, as described in “To prepare the port for parallel port printing” on

page 1-9 , and then

return to this procedure. You may need your Windows System CD.

If you changed the selection in the “Print to the following port” menu, click Apply.

A Warning dialog box may appear, stating that fonts you downloaded to the previously selected port may be lost; click OK.

Click Spool Settings.

1-9 Setting up PostScript or PCL printing with Windows 98/Me

Select either “Spool print jobs so program finishes printing faster” or “Print directly to the printer.”

The selection you make depends on the port timeout you set in

step 3

page 1-7

• If you set the Port Timeout in Seconds to 10, you can select either option; however, spooling is faster.

• If you set the Port Timeout in Seconds to 5, select “Print directly to the printer.”

Select “Disable bi-directional support for this printer” and click OK.

Click Apply.

You are now ready to print from your applications to the Fiery with the parallel port.

To confirm the connection, print a Test page.

Click the General tab.

10.

Click Print Test Page and click OK.

11.

In the Job Notes field, type user and job identification information, and click OK.

If the Test page prints successfully, you are ready to print from the computer.

Perform the following procedure in Windows 98/Me only if the LPT1 port is not currently set to ECP Printer Port.

O PREPARE THE PORT FOR PARALLEL PORT PRINTING

INDOWS

98/M

Click Start, choose Settings, and then choose Control Panel.

Double-click System.

The System Properties dialog box appears.

Click the Device Manager tab.

1-10 Installing User Software on a Windows Computer

Double-click Ports.

Double-click the port with LPT1 in its name.

In the (LPT1) Properties dialog box, click the Driver tab and then click Update Driver.

The Update Device Driver Wizard dialog box appears.

Click Next.

1-11 Setting up PostScript or PCL printing with Windows 98/Me

Select “Display a list of all the drivers in a specific location, so you can select the driver you want,” and then click Next.

Select “Show all hardware.”

10.

From the Manufacturers list, select “(Standard port types).” From the Models list, select “ECP Printer Port” (not Printer Port). Click Next.

11.

Click Yes in the Update Driver Warning dialog box.

12.

Click Next.

13.

Click Finish, then close the Printer Port Properties and System Properties dialog boxes.

You must restart your computer to activate the new settings. After Windows 98/Me

restarts, complete the procedure described in “To prepare the printer for parallel port printing” on page 1-8.

Completing the Windows 98/Me IPX/SPX or IPX (Novell) connection

If you are printing through a Novell server, the Novell network and file server should be set up before you begin. The file server should be configured with a print server and print connection for the C9800. For details, see your NetWare documentation and

Chapter 2 of the Configuration Guide.

To print from Windows 98/Me computers over IPX (Novell), you must first set up

IPX/SPX protocols, and then configure the C9800 by choosing the IPX frame type and entering the settings for the port you use.

1-12 Installing User Software on a Windows Computer

O SELECT A FRAME TYPE FOR

IPX/SPX

PRINTING

FOR

INDOWS

98/M

Click Start, choose Settings, and then choose Control Panel.

Double-click the Network icon.

Make sure that IPX/SPX-compatible Protocol is listed in the installed network components pane.

For instructions, see your Windows 98/Me documentation or contact Microsoft

Technical Support.

Double-click the IPX/SPX-compatible Protocol icon.

Click the Advanced tab.

Select Frame Type in the Property list.

In the Value menu, choose the Frame Type that corresponds to the one set in Fiery

Network Setup.

If necessary, print the Configuration page from the C9800 Printer Control Panel to determine which frame type(s) are configured.

1-13 Setting up PostScript or PCL printing with Windows 98/Me

Do not select Auto. Auto may not select the frame type specified on the C9800.

OTE

Click OK and close the Network Control Panel.

When prompted to restart your computer, click Yes.

O SET UP A PORT FOR

IPX (N

OVELL

)

PRINTING WITH

INDOWS

98/M

Click Start, choose Settings, and then choose Printers.

Click the appropriate printer icon and choose Properties from the File menu.

Click the Details tab and click Add Port.

A list of connection options appears.

In the Add Port dialog box, specify the network path or click Browse for a display of your network environment.

If you are using a NetWare file server, double-click the icon for the NetWare file server to use for printing to the C9800.

1-14 Installing User Software on a Windows Computer

Click the printer icon for the NetWare print queue you want to use, and then click OK.

In the Add Port dialog box, verify that the network path is updated and click OK.

Your print jobs are transmitted to the specified print queue on the Novell file server.

The C9800 polls the file server, and if jobs are present, they are transmitted to the Fiery.

To confirm the connection, click the General tab, click Apply, and then click Print

Test Page.

After the Test page prints successfully, you are ready to print from the computer.

Setting up SMB printing with Windows 98/Me

SMB printing (also known as Windows or WINS printing) allows you to print to a particular connection (Hold, Print, or Direct) without a network server PC. To set up

SMB printing, you must have the TCP/IP protocol and Client for Microsoft Networks installed.

OTE

This procedure should not be necessary if you installed the driver from the CD installer program. That program installs the OKI LPR utility along with the driver and sets up the network connection for you.

Each connection (Hold, Print, or Direct) requires a new printer driver and printer

description file. Repeat the procedure “To set up SMB printing on Windows 98/Me”

for each connection. If you install more than one printer, give each a descriptive name during printer driver installation, such as Aero-Print or Aero-Hold, so you can easily identify printers.

EFORE YOU BEGIN

• Configure the Fiery for SMB printing in Run Setup > Network Setup > Service

Setup > Windows Setup.

SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map, and on the Configuration page.

1-15 Setting up PostScript or PCL printing with Windows 98/Me

O SET UP

SMB

PRINTING ON

INDOWS

98/M

Run the OKI LPR utility on the Windows 98 PC.

This utility will have been installed along with the driver if you installed it from the

Drivers CD (CD1). If not, you will first need to install it from the available utilities on that CD.

Choose Permote Print>Add Printer.

Choose the Printer Name of your C9800 from the list of installed drivers.

Enter the C9800’s IP address and any comments you wish to add.

OTE

You can also locate the printer using the Discover button.

If you are not able to locate your C9800, contact your network administrator.

Click OK.

OTE

For a description of each print connection, see Chapter 3 of the

Configuration Guide.

1-16 Installing User Software on a Windows Computer

Setting up IPP printing with Windows 98/Me

With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over the Internet.

IPP printing is supported on Windows 2000/XP but can be enabled on

Windows 98/Me computers by installing the wpnpins.exe client file (available on the

Windows Me CD or the Windows 2000 Server CD). For more information about obtaining and installing this client, contact Microsoft Technical Support.

OTE

The IPP setup procedures are performed after installing the appropriate printer drivers. See

“To install the PostScript or PCL printer driver for Windows 98/Me” on page 1-2.

EFORE YOU BEGIN

Prepare the Fiery for TCP/IP printing.

Make sure the Fiery is configured for IPP printing.

For more information, see the Configuration Guide.

Specify the printing destination on your computer.

O SET UP

IPP

PRINTING WITH

INDOWS

98/M

Click Start, choose Settings, and then choose Printers.

In the Printers windows, right-click the icon for the Fiery PostScript printer driver and choose Properties.

Click the Details tab and click Add Port.

The Add Port dialog box appears.

Enter the network path for the printer.

Click OK.

1-17 Setting up PostScript or PCL printing with Windows NT 4.0

Setting up PostScript or PCL printing with

Windows NT 4.0

To set up the Fiery as a PostScript or PCL printer, you must install the PostScript or

PCL printer driver for Windows NT 4.0 and the corresponding printer description files. You must also configure the print connection between the computer and the

Fiery. If you are printing over a network, you must configure a network connection. If you are printing directly to the printer, you must configure a parallel port connection.

OTE

The procedures for setting up printing with the PostScript and PCL printer drivers are similar. The following illustrations show the PostScript driver. Any differences are noted.

Installing the PostScript or PCL printer driver for Windows NT 4.0

The procedure for installing the printer driver(s) for Windows NT 4.0 is similar to that for installing under Windows 98. If you follow that procedure, installing from the included Drivers CD (CD1), the LPR and Network Extension utilities are automatically included in the installation, and the network connection on TCP/IP networks is established automatically by the installer.

O INSTALL THE

OST

CRIPT OR

PCL

PRINTER DRIVER

FOR

INDOWS

NT 4.0

Insert CD1 into your CD drive and wait for the CD to autorun the setup program.

If the CD does not autorun navigate to the CD root directory and double-click the setup.exe program to start the installer.

Choose your preferred language for the installer from the drop-down list.

1-18 Installing User Software on a Windows Computer

From the next screens after accepting the licensing agreement, follow the on-screen instructions to complete the driver installation.

Click Install Driver to begin installing the required printer driver and follow the onscreen instructions to complete the driver installation.

For the Fiery PS driver the installer will also install the Job Monitor utility so that you can monitor the status of the printer and your print jobs directly from the Windows desktop.

When driver installation is complete you may wish to install other software utilities from the main installer screen. Information about each is available on the installer screen.

1-19 Setting up PostScript or PCL printing with Windows NT 4.0

Configuring installed options

After you have completed the printer driver installation, you must configure the driver to reflect any optional hardware installed on the C9800. This allows the driver to take advantage of these features. You can configure the options manually; or for TCP/IP network connections, you can use the Two-Way Communication feature to configure the options automatically.

Configuring installed options manually

The following procedure describes how to manually configure the driver for the options installed on the printer.

O CONFIGURE INSTALLABLE OPTIONS FROM THE PRINTER DRIVER FOR

INDOWS

NT 4.0

Click Start>Settings>Printers.

Right-click the appropriate printer icon and choose Properties from the context menu.

Click the Installable Options (PS) or Device Options (PCL) tab.

Select an installed option from the Available Options list.

In the PS driver click Add to move the option to the Installed Options list. This is not necessary in the PCL driver.

Click Apply, and then click OK.

PCL

1-20 Installing User Software on a Windows Computer

You are ready to connect to your network type (see

“Completing the Windows NT 4.0 printer connection” on page 1-21).

Configuring installed options and updating print options settings automatically

If you have a TCP/IP-enabled network, you can automatically update your printer driver to reflect the options currently installed on the C9800. When the printer driver is first installed, the installable options have default settings that were set up in

Fiery Setup or ColorWise Pro Tools. When you update the printer driver with the

Two-Way Communication feature, you allow the C9800 to complete the actual setting.

The Two-Way Communication feature also updates Expert Color Settings options to reflect the current color settings on the Fiery. To access Expert Color Settings options, click the Expert Settings tab in the ColorWise print option bar of the Fiery printing tab of your printer driver. For more information, see Chapter 1 of the

Color Guide.

O SET UP

-W

OMMUNICATION IN THE PRINTER

DRIVER FOR

INDOWS

NT 4.0

In the Installable Options (PS) or Device Options (PCL) tab, select Two-Way

Communication.

Type the C9800’s IP address or DNS name.

PCL

1-21 Setting up PostScript or PCL printing with Windows NT 4.0

In the PS driver, to display the C9800’s current default settings when opened, select

Update Fiery Driver When Opened.

Click Update.

In the PS driver, to receive an e-mail notification after your job has been printed, select Enable E-mail Notification, and type in the e-mail address to which notification should be sent.

You will also receive e-mail notification of any errors that occur during printing.

OTE

Enable E-mail Notification is displayed only if Email Service is enabled at Setup.

Click OK.

Completing the Windows NT 4.0 printer connection

To print from Windows NT 4.0, you must:

• Set up network servers, if any.

• Set up the Fiery to accept print jobs from your computer.

• Configure a port on each Windows NT 4.0 computer for the network type.

To do this

Configure the parallel connection

Configure the TCP/IP (LPR port) connection

Configure the IPX (Novell) connection

See

Required for printing locally via parallel port.

See “Completing the Windows NT 4.0 parallel port connection” in this section.

Done automatically during driver installation from CD.

Required for printing via a NetWare server. See

“Completing the Windows NT 4.0 IPX

(Novell) connection” on page 1-22.

Completing the Windows NT 4.0 parallel port connection

The parallel port cable connects the Fiery to a single computer. Once you have installed the Windows NT 4.0 PostScript printer driver and the Fiery printer description files, complete the setup for parallel port printing.

1-22 Installing User Software on a Windows Computer

O SET UP PARALLEL PRINTING FOR

INDOWS

NT 4.0

Click Start, choose Settings, and then choose Printers.

Double-click the Fiery icon and choose Properties from the Printer menu.

In the Ports tab, confirm that LPT1 (Local Port) is checked.

The Fiery is ready to accept parallel print jobs from your computer, using the

Windows NT 4.0 PostScript printer driver and the Fiery printer description file.

Click the General tab and click Print Test Page.

To share the printer on the network, click the Sharing tab.

Select whether to share the printer, and specify the operating systems used by network clients.

Click OK to exit the Printer Properties dialog box.

Completing the Windows NT 4.0 IPX (Novell) connection

Complete the setup for the IPX (Novell) connection as follows:

• Configure the Novell network and file server for handling Fiery print jobs. The file server should be configured with a print server and print connection for the Fiery.

For details, see your NetWare documentation.

• Prepare the Fiery for IPX printing.

• Set up the IPX connection on the computer.

NetWare protocols (NWLink IPX/SPX Compatible Transport) and NetWare client services should already be installed on the Windows NT 4.0 computer.

O SET UP

IPX (N

OVELL

)

PRINTING FOR

INDOWS

NT 4.0

Double-click Network Neighborhood.

Double-click NetWare or Compatible Network.

1-23 Setting up PostScript or PCL printing with Windows NT 4.0

A list of NetWare servers appears.

Double-click the NetWare Tree or File Server on which the network administrator defined a print connection for the Fiery.

You may have to log in to the file server to see the print connections.

Double-click the print connection defined for the Fiery.

If the NetWare server does not have a suitable driver for the Fiery, you may be asked if you want to set up the printer on your computer. Click Yes.

Insert the Drivers CD (CD1) and click OK to install the Fiery PostScript printer driver.

If the CD Installer window opens and prompts for your preferred language, simply close the window.

In the dialog box displaying lists of manufacturers and printers, click Have Disk.

The Install from Disk dialog prompts you for a disk.

Type the name of your CD driver (for example, D:\) and click Browse.

Browse to the \Drivers\<language>\nt40\PS (or PCL) folder and click Open.

The selected path is copied to the Install from Disk dialog.

10.

In the Printers list, select the driver for your printer model and click OK.

When installation is complete, a new printer window appears, with the name of the print queue on the NetWare server.

1-24 Installing User Software on a Windows Computer

11.

Choose Properties from the File menu and click the Ports tab.

Verify that the connection to the NetWare queue is listed and selected as a port for the Fiery.

12.

Click the General tab and click Print Test Page.

13.

In the printer Job Notes window, type user and job identification information and click OK.

The Test page remains listed in the queue window until it is printed.

The Fiery polls the NetWare server for print jobs in the print connection defined for the Fiery. When you print, your PostScript files are spooled to that connection and transmitted over the queue “port” to the Fiery.

Setting up SMB printing on Windows NT 4.0

SMB printing (also known as Windows printing) allows you to install the PostScript or

PCL printer driver and printer description files, and print from your computer to a particular print connection (Hold, Print, or Direct) on the Fiery. These instructions assume you have installed the TCP/IP protocol and Client for Microsoft Networks.

1-25 Setting up PostScript or PCL printing with Windows NT 4.0

Each connection (Hold, Print, or Direct) requires a new printer driver and printer description file. To set up printing to a second or third print connection, repeat the

procedure “To set up SMB printing on Windows NT 4.0” on page 1-25. If you install

more than one printer, give each a descriptive name during printer driver installation, such as Aero-Print or Aero-Hold, so you can easily identify printers.

OTE

To change printer defaults and configure installable options from Windows

NT 4.0, you must log on with the special log-in name, ‘efi_admin_efi’ (instead of

Administrator) and use the password specified in Fiery Setup. If you log on as a User, you can install the printer driver through Point and Print, but you cannot modify printer defaults and configure installable options.

EFORE YOU BEGIN

• Configure the Fiery for SMB printing in Run Setup > Network Setup > Service

Setup > Windows Setup.

SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map, and on the Configuration page. For more information, see Chapter 2 of the

Configuration Guide.

O SET UP

SMB

PRINTING ON

INDOWS

NT 4.0

Double-click Network Neighborhood.

1-26 Installing User Software on a Windows Computer

Browse for the printer you want to print to.

The printer name you are browsing for is the name entered in Network

Setup > Service Setup > Windows Setup > Server Name. For this information, see the

Configuration page.

The amount of network traffic determines the amount of time required for the

Browse function.

OTE

You can also locate the printer with the Find feature on your Windows computer. Click Start , choose Find, and then choose Computer. Enter the name of the printer, and click Find Now.

If you are not able to locate your C9800, contact your network administrator.

Double-click the name of the Fiery to display enabled print connections.

Double-click the name of the connection you want to print to.

The Printers dialog box appears, asking whether you want to set up the printer.

Select Yes to complete the installation for the selected connection.

Windows NT 4.0 downloads the printer driver and printer description files from the

Fiery to your computer and installation is complete.

1-27 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Setting up PostScript or PCL printing with Windows

2000/XP/Server 2003

To set up the Fiery as a PostScript or PCL printer, you must install the PostScript or

PCL printer driver for Windows 2000/XP/Server 2003 and the corresponding printer description files. You must also configure the print connection between the computer and the Fiery. If you are printing over a network, you must configure a network connection. If you are printing directly to the printer, you must configure a parallel port connection.

OTE

For Windows Server 2003, use the Windows XP printer driver.

OTE

The procedures for configuring the options for the PostScript and PCL printer drivers are similar.

Installing the PostScript or PCL printer driver for Windows

2000/XP/Server 2003

The following procedure describes installing the printer driver from the Drivers CD

(CD1). Subsequent procedures describe setting up the print connection.

O INSTALL THE

OST

CRIPT OR

PCL

PRINTER DRIVER

FOR

INDOWS

2000/XP/S

ERVER

2003

Insert CD1 into your CD drive and wait for the CD to autorun the setup program.

If the CD does not autorun navigate to the CD root directory and double-click the setup.exe program to start the installer.

Choose your preferred language for the installer from the drop-down list.

1-28 Installing User Software on a Windows Computer

From the next screens after accepting the licensing agreement, follow the on-screen instructions to complete the driver installation.

Click Install Driver to begin installing the required printer driver and follow the onscreen instructions to complete the driver installation.

For networked printers the installer will also install the OKI LPR program which makes connecting the printer over TCP/IP networks easy.

The installer will also install the Network Extension, which enables the driver to query the printer and automatically enable any optional hardware installed on it.

For the Fiery PS driver the installer will also install the Job Monitor utility so that you can monitor the status of the printer and your print jobs directly from the Windows desktop.

When driver installation is complete you may wish to install other software utilities from the main installer screen. Information about each is available on the installer screen.

1-29 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Configuring installed options

After you have completed the printer driver installation, you must configure the Fiery to reflect the options installed on the printer. This allows the Fiery to take advantage of these options. You can configure the options manually; or for TCP/IP network connections, you can use the Two-Way Communication feature to configure the options automatically.

Configuring installed options manually

The following procedure describes how to manually configure the Fiery for the options installed on the printer.

O CONFIGURE INSTALLABLE OPTIONS ON THE

IERY FROM THE

OST

CRIPT

PRINTER DRIVER FOR

INDOWS

2000/XP/S

ERVER

2003

Windows 2000: Click Start, choose Settings, and then choose Printers.

Windows XP: Click Start, and choose Printers and Faxes.

Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and

Faxes.

Right-click the appropriate printer icon and choose Properties.

Click the Installable Options (PS) or Device Options (PCL) tab.

Select an installed option from the Available Options list.

In the PS driver click Add to move the option to the Installed Options list. This is not necessary in the PCL driver.

PS PCL

1-30 Installing User Software on a Windows Computer

Click OK to activate the current settings.

You are ready to connect to your network type (see the next section

“Completing the

Windows 2000/XP/Server 2003 printer connection”

Configuring installed options and updating print options settings automatically

If you have a TCP/IP-enabled network, you can automatically update your printer driver to reflect the options currently installed on the Fiery. When the printer driver is first installed, the installable options have default settings that were set up in

Fiery Setup or ColorWise Pro Tools. When you update the printer driver with the

Two-Way Communication feature, you allow the Fiery to complete the actual setting.

The Two-Way Communication feature also updates Expert Color Settings options to reflect the current color settings on the Fiery. To access the Expert Color Settings options, click the Expert Settings tab in the ColorWise print option bar of the Fiery printing tab of your printer driver. For more information, see Chapter 1 of the

Color Guide.

O SET UP

-W

OMMUNICATION FOR

OST

CRIPT OR

PCL

PRINTER DRIVERS FOR

INDOWS

2000/XP/S

ERVER

2003

In the Installable Options (PS) or Device Options (PCL) tab, select Two-Way

Communication.

Type the C9800’s IP address or DNS name.

PCL

1-31 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

In the PS driver, to display the C9800’s current default settings when opened, select

Update Fiery Driver When Opened.

Click Update.

In the PS driver, to receive an e-mail notification after your job has been printed, select Enable E-mail Notification, and type in the e-mail address to which notification should be sent.

You will also receive e-mail notification of any errors that occur during printing.

OTE

Enable E-mail Notification is displayed only if Email Service is enabled at Setup.

Click OK.

Completing the Windows 2000/XP/Server 2003 printer connection

To print from Windows 2000/XP/Server 2003, you must:

• Set up network servers, if any.

• Set up the Fiery to accept print jobs from your computer.

• Configure a port on each Windows 2000/XP/Server 2003 computer for the network type.

To do this

Configure the parallel connection

Configure the TCP/IP (LPR port) connection

Configure the IPX (Novell) connection

See

“Completing the Windows 2000/XP/Server

2003 parallel port connection” in this section.

“Completing the Windows 2000/XP/Server

2003 TCP/IP and Port 9100 or

LPR connection” on page 1-33.

“Completing the Windows 2000/XP/Server

2003 IPX (Novell) connection” on page 1-34.

OTE

The procedures for completing the printer connection for Windows 2000/XP and Windows Server 2003 are similar. Windows 2000 illustrations are used in the following procedure, with relevant Windows XP differences noted.

1-32 Installing User Software on a Windows Computer

Completing the Windows 2000/XP/Server 2003 parallel port connection

The parallel port cable connects the Fiery to a single computer. Once you have installed the Windows 2000/XP/Server 2003 PostScript printer driver and the Fiery printer description files, complete the setup for parallel port printing.

O SET UP PARALLEL PRINTING FOR

INDOWS

2000/XP/S

ERVER

2003

Windows 2000: Click Start, choose Settings, and then choose Printers.

Windows XP: Click Start, and choose Printers and Faxes.

Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and

Faxes.

Double-click the Fiery icon and choose Properties from the Printer menu.

In the Ports tab, confirm that LPT1 (Local Port) is selected.

The Fiery is ready to accept parallel print jobs from your computer, using the

Windows 2000/XP/Server 2003 PostScript printer driver and the Fiery printer description file.

Click the General tab and click Print Test Page.

To share the printer on the network, click the Sharing tab.

Select whether to share the printer, and specify the operating systems used by network clients.

Click OK to exit the Printer Properties dialog box.

1-33 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Completing the Windows 2000/XP/Server 2003 TCP/IP and Port 9100 or

LPR connection

OTE

If you installed the driver from the Drivers CD (CD1), this procedure is not necessary. TCP/IP connection will have been set up automatically during the installation.

Once you have installed the PostScript and printer driver files, complete the setup for the TCP/IP and LPR connection as follows:

• Prepare the Fiery to accept print jobs using TCP/IP and LPR protocols.

For details, see Chapter 2 of the Configuration Guide.

• Install OKI LPR software utility from the Drivers CD (CD1).

• Run OKI LPR and add the printer by discovery on the network. (See the Help screens with the OKI LPR utility.)

Before you continue, contact the system administrator for the IP address assigned to the Fiery, as well as the subnet mask and the gateway address, if they are used.

The TCP/IP protocol should already be installed on the Windows 2000/XP/Server

2003 workstation.

OTE

You can also set up the LPR connection by installing Print Services for UNIX, which is supplied as an add-on Windows component with your Windows

2000/XP/Server 2003 CD. For more information, see your Windows documentation.

O SET UP

TCP/IP

AND

ORT

9100

LPR

CONNECTION FOR

INDOWS

2000/XP/S

ERVER

2003

Insert the Drivers CD (CD1) and wait for the CD Installer to autorun.

If the setup program does not start after a minute or so, navigate to the CD top level directory and run setup.exe.

Choose you preferred installer language and wait for main installer screen to appear.

If necessary, click Accept when prompted to accept the licence conditions.

Follow the directions of the main installer screen to install OKI LPR and then the OKI

Network Extension from the available software utilities.

When installation if complete, exit the CD Installer program.

1-34 Installing User Software on a Windows Computer

Reboot the computer and then run OKI LPR either from the Programs menu or from its icon in the system tray (bottom right, near the clock).

Choose Add Printer from the Remote Print menu (see OKI LPR on-line help).

Choose your C9800 installed driver from the Printer Name drop-down list.

Enter the IP address of the C9800 if you have it, or click the Discover button to search the network and choose your printer.

If your printer is connected via DHCP the OKI LPR utility will still find it if its IP address changes next time it is rebooted.

Completing the Windows 2000/XP/Server 2003 IPX (Novell) connection

Complete the setup for the IPX (Novell) connection as follows:

• Configure the Novell network and file server for handling Fiery print jobs. The file server should be configured with a print server and print connection for the Fiery.

For details, see your NetWare documentation.

• Prepare the Fiery for IPX printing.

• Set up the IPX connection on the computer.

NetWare protocols (NWLink IPX/SPX Compatible Transport) and NetWare client services should already be installed on the Windows 2000/XP/Server 2003 computer.

O SET UP

IPX (N

OVELL

)

PRINTING FOR

INDOWS

2000/XP/S

ERVER

2003

Windows 2000: Double-click My Network Places.

Windows XP: Click Start, and then click My Network Places.

Windows Server 2003: Click Start, choose Explorer, and then click My Network Places.

Double-click NetWare or Compatible Network.

1-35 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

A list of NetWare servers appears.

Double-click the NetWare Tree or File Server on which the network administrator defined a print connection for the Fiery.

You may have to log in to the file server to see the print connections.

Double-click the print connection defined for the Fiery.

If the NetWare server does not have a suitable driver for the Fiery, you may be asked if you want to set up the printer on your computer. Click Yes.

Click OK to install the Fiery PostScript printer driver.

Follow the procedure that starts with step 6 on page 1-17 .

When installation is complete, a new printer window appears, with the name of the print queue on the NetWare server.

Choose Properties from the File menu and click the Ports tab.

1-36 Installing User Software on a Windows Computer

Verify that the connection to the NetWare queue is listed and selected as a port for the Fiery.

Click the General tab and click Print Test Page.

10.

In the printer Job Notes field, type user and job identification information and click OK.

The Test page remains listed in the queue window until it is printed.

Setting up SMB printing on Windows 2000/XP/Server 2003

SMB printing (also known as Windows printing) allows you to install the printer driver and associated files, and print from your computer to a particular print connection (Hold, Print, or Direct) on the Fiery. These instructions assume you have installed the TCP/IP protocol and Client for Microsoft Networks.

1-37 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Each connection (Hold, Print, or Direct) requires a new printer driver and printer description file. To set up printing to a second or third print connection, repeat the

procedure, “To set up SMB printing on Windows 2000/XP/Server 2003” . If you

install more than one printer, give each a descriptive name during printer driver installation, such as Aero-Print or Aero-Hold, so you can easily identify printers.

EFORE YOU BEGIN

• Configure the Fiery for SMB printing in Network Setup > Service Setup > Windows Setup.

SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map, and on the Configuration page. For more information, see Chapter 2 of the

Configuration Guide.

O SET UP

SMB

PRINTING ON

INDOWS

2000/XP/S

ERVER

2003

Open My Network Places.

Browse for the printer you want to print to.

The printer name you are browsing for is the name entered in Network Setup >

Service Setup > Windows Setup > Server Name. For this information, see the

Configuration page.

The amount of network traffic determines the amount of time required for the

Browse function.

OTE

You can also locate the printer using the Search feature on your Windows computer. Right-click My Network Places and click Search for Computers. Type the name of the printer and click Search Now.

If you are not able to locate your Fiery, contact your network administrator.

Double-click the name of the Fiery to display enabled print connections.

Double-click the print connection you want to print to.

The printer files are downloaded from the Fiery and the print connection is set up.

For more information, see

“To install the PostScript or PCL printer driver for

Windows 2000/XP/Server 2003” on page 1-27.

1-38 Installing User Software on a Windows Computer

Setting up IPP printing with Windows 2000/XP/Server 2003

With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over the Internet.

IPP printing is supported directly for Windows 2000/XP/Server 2003 computers. IPP printing is not supported on Windows NT 4.0.

OTE

The IPP setup procedures are performed after installing the appropriate printer drivers (see

“To install the PostScript or PCL printer driver for Windows

2000/XP/Server 2003” on page 1-27).

EFORE YOU BEGIN

Prepare the Fiery for TCP/IP printing.

Make sure the Fiery is configured for IPP printing. For more information, see Chapter 4 of the Configuration Guide.

Specify the printing destination on your computer.

O SET UP

IPP

PRINTING WITH

INDOWS

2000/XP/S

ERVER

2003

Windows 2000: Click Start, choose Settings, and then choose Printers.

Windows XP: Click Start and choose Printers and Faxes.

Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and

Faxes.

Windows 2000: Double-click the Add Printer icon and click Next.

Windows XP: Click Add Printer.

Windows Server 2003: Choose Add a printer

Select Network printer and click Next.

1-39 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Select “Connect to a printer on the Internet or on your intranet.” Type an IP address or computer name in the URL field.

The URL for the printer is the IP address or DNS name followed by “ipp” and the connection you want to print to (print, hold, or direct). Insert slashes between the different elements.

Click Next.

The Connect to Printer dialog box appears.

Click OK.

The Add Printer Wizard dialog box appears.

If you are installing the PostScript printer for Windows 2000/XP/Server 2003 for the first time, follow the procedure described on

page 1-27 .

If you have already installed the printer driver on your computer, choose the appropriate names from the Manufacturers and Printers lists and click OK.

Indicate whether you want to make the Fiery the default printer and click Next.

Click Finish.

1-40 Installing User Software on a Windows Computer

Installing EFI Fiery Mail Port

The E-Mail Service provides a method to print and control the C9800 remotely. Jobs are sent to the C9800 in the form of e-mail attachments. You can set up e-mail printing on Windows computers by adding the EFI Fiery Mail Port software as a printer port.

To set up the Fiery for e-mail printing, see Chapter 4 of the Configuration Guide. After

Setup has been performed, install the software from the Utilities CD (CD2) onto your

Windows computer, and then add a port.

OTE

Procedures are given for Windows 98/Me and Windows NT 4.0. Procedures for

Windows 2000/XP/Server 2003 are similar to those for Windows NT 4.0.

O INSTALL THE E

MAIL PORT MONITOR ON

INDOWS COMPUTERS

Insert the Utilities CD (CD2) supplied with your C9800 into your CD drive.

Normally the Installer program should autorun. If it does not, navigate to the top level directory window of the CD and run setup.exe.

Select Fiery Utilities.

Click on Install Fiery Mail Port and follow the on-screen prompts to install the mail port to your computer.

When installation is complete, you are ready to configure the connection for the e-mail port monitor.

1-41 Installing EFI Fiery Mail Port

O CONFIGURE THE CONNECTION FOR

EFI F

IERY

AIL

ORT ON

INDOWS

98/M

Click Start, choose Settings, and then choose Printers.

In the Printers window, right-click the icon for the Fiery printer driver.

For instructions on installing the printer driver, see

“Installing the PostScript or PCL printer driver for Windows 98/Me” on page 1-2.

Choose Properties, and click the Details tab.

Click Add Port.

Click Other and select EFI Fiery Mail from the list of ports.

Click OK.

1-42 Installing User Software on a Windows Computer

Enter the basic information required to set up the e-mail port.

Fiery’s E-mail Address

—Enter the e-mail address of the C9800.

Outgoing Mail Server

—Enter the name or IP address of the SMTP server for the port monitor to use.

Click Advanced.

The E-Mail Port Configuration dialog box appears.

Enter the following information.

For Fiery Server:

E-mail Address

—The e-mail address of the C9800.

Queue

—The print connection on the Fiery that you want.

For Outgoing Mail Server (SMTP):

Server Name

—The SMTP server to use.

From Address

—The “from” address to insert in the e-mail.

For Options:

Break apart messages larger than

—The maximum size of a single e-mail message is displayed. If a job exceeds this size, it is split into multiple messages, each not exceeding this size.

Status messages from Fiery

—When enabled, the Status option requests the Fiery to send status reports of the job via e-mail.

1-43 Installing EFI Fiery Mail Port

10.

Click OK.

The name assigned to the EFI Fiery Mail Port appears in the Details tab of the Fiery printer driver.

11.

Click Apply, and then click OK.

The connection for the EFI Fiery Mail Port has now been configured.

O CONFIGURE THE CONNECTION FOR THE

EFI F

IERY

AIL PORT

INDOWS

NT 4.0

Click Start, choose Settings, and then choose Printers.

In the Printers window, double-click the Add Printer icon and click Next.

Specify printing using a Local printer and click Next.

In the window displaying a list of ports, click Add Port.

The Printer Ports dialog box is displayed, with the EFI Fiery Mail port listed as one of the available ports.

Select EFI Fiery Mail and click New Port.

1-44 Installing User Software on a Windows Computer

The Add Port dialog box appears.

Enter the basic information required to set up the e-mail port.

Fiery’s E-mail Address

—Enter the e-mail address of the C9800.

Outgoing Mail Server

—Enter the name or IP address of the SMTP server for the port monitor to use.

Click Advanced.

The E-Mail Port Configuration dialog box appears.

1-45 Installing EFI Fiery Mail Port

Enter the following information.

For Fiery Server:

E-mail Address

—The e-mail address of the Fiery.

Queue

—The print connection on the Fiery that you want.

For Outgoing Mail Server (SMTP):

Server Name

—The SMTP server to use.

From Address

—The “from” address to insert in the e-mail.

For Options:

Break apart messages larger than

—The maximum size of a single e-mail message is displayed. If a job exceeds this size, it is split into multiple messages, each not exceeding this size.

Status messages from Fiery

—When enabled, the Status option requests the Fiery to send status reports of the job via e-mail.

Click OK.

The Add Printer Wizard dialog box appears.

10.

Click Next and follow the instructions for installing the printer driver for your

Windows computer.

1-46 Installing User Software on a Windows Computer

Installing Fiery utilities

From the CD2, you can install the following Fiery utilities and user software:

• ColorWise Pro Tools

• Fiery Downloader

• EFI Fiery Mail Port (see “Installing EFI Fiery Mail Port” on page 1-40)

• Command WorkStation

The Fiery utilities must be separately installed on each user’s computer. The installation of each utility is similar. Before you begin each installation, determine where you want to install each item on your hard disk. Otherwise, the software is placed by default in the Fiery folder inside the Programs folder. The Command

WorkStation installer also installs the Java files necessary to use Fiery Setup from

Command WorkStation.

OTE

To install software, you must have Service Pack 4 installed on a Windows 2000 computer and Service Pack 1 installed on Windows XP. If not, a warning message alerts you to install the correct service pack.

To use Fiery software (Command WorkStation and ColorWise Pro Tools) as well as

WebTools on a Windows computer, you must install the Sun Java file, Java Runtime

Environment (JRE), provided in the CommonUtl folder on the User Software CD. If the Sun Java file is not installed, you are prompted to install it before you proceed to install Fiery software. For more information on installing Java Runtime Environment

(JRE), see “To install Sun Java on your computer” on page 1-47. For more information

on WebTools, see the Job Management Guide and the Printing Guide.

1-47 Installing Fiery utilities

O INSTALL

AVA ON YOUR COMPUTER

When the dialog box prompting you to install Java Runtime Environment (JRE) appears, click OK to proceed with installation.

Click Yes in the License Agreement dialog box.

Select Typical for Setup Type and click Next.

When installation of Java Runtime Environment (JRE) files is complete, click Finish and follow the instructions for installing Fiery software in

“To install Fiery utilities” on page 1-47.

After installation of the Sun Java files, a Java Web Start shortcut is created on your computer desktop. This is not intended for use with Fiery software, so you may delete the shortcut if you wish.

O INSTALL

IERY UTILITIES

Insert the Utilities CD (CD2) supplied with your C9800 into your CD drive.

1-48 Installing User Software on a Windows Computer

Normally the Installer program should autorun. If it does not, navigate to the top level directory window of the CD and run setup.exe.

Select Fiery Utilities.

Click on the name of the utility you wish to install.

Click on the “Tell me more” links to see a description of each utility.

Follow the instructions in the Setup dialog boxes to complete installation.

1-49 Using Fiery utilities for the first time

Using Fiery utilities for the first time

Before you can use the newly installed software, you must configure the connection to the Fiery.

Configuring the connection for Fiery utilities

The first time you start one of the Fiery utilities, you must configure the connection to the Fiery. Similar configuration is used for all Fiery utilities, so a change in one configuration affects all the other connections. Configuration for most Fiery utilities is described in the following procedure.

For configuration of specific Fiery utilities, see “Configuring the connection for

Command WorkStation” on page 1-51.

EFORE YOU BEGIN

• Print the Configuration page from the C9800 Control Panel.

This page contains information you need when configuring the connection, such as the IP address. For TCP/IP installations, you can use the DNS name of the Fiery instead of the IP address. Make sure the Fiery is already registered in a Domain Name

Server (DNS) on your network. For more information, see your Windows system documentation.

O CONFIGURE THE CONNECTION FOR

IERY UTILITIES

Start the utility for which you want to configure a connection.

For details, see the Printing Guide.

If the No Servers Configured dialog box appears, click OK.

If the Choose Printer Device dialog box appears, click Add.

Enter the appropriate information for the Fiery.

Nickname

—Enter a name for the Fiery. This name does not have to match the actual

Server Name of the Fiery.

OTE

The nickname cannot contain any of the following seven characters:

[ ] _ " ' <space> <tab>

Device name of the

Fiery (C9800)

1-50 Installing User Software on a Windows Computer

Protocol

—Choose the type of network protocol you are using from the menu.

OTE

Fiery utilities are not supported over IPX/SPX. Command WorkStation is supported on Windows computers over TCP/IP.

Server Name

—Enter the IP address (or DNS name) of the C9800.

New Device

—Enter the name of the device the Fiery is installed in: C9800.

OTE

Type C9800 exactly as shown because the device name is case-sensitive.

When you have entered all the information, click Add.

With the device name (C9800) selected in the Devices list, click OK.

The Fiery appears in the list of available servers. The first line of the entry displays the nickname you gave the server, followed by the protocol you chose. The second line displays the device name.

With the device name selected in the list of Available Servers, click Select to begin using the utility.

Modifying the configuration

Edit the configuration whenever there is any change to your Fiery server or network, such as a server name or IP address. If you change Fiery Setup information, do so before reconfiguring the connection.

1-51 Using Fiery utilities for the first time

O MODIFY THE CONFIGURATION

To edit information for a Fiery in the list of available servers, select the Fiery by its nickname and click Modify.

Make the necessary changes in the Modify Server Settings dialog box and click OK.

To add a new Fiery to the list of available servers, click Add. Configure the Add New

Server dialog box as outlined in steps 3

through 5 in the previous procedure.

To remove a Fiery, select the Fiery by its nickname and click Remove.

OTE

The nickname cannot be modified.

Configuring the connection for Command WorkStation

The first time you start Command WorkStation, you are prompted to configure the connection to the Fiery.

O CONFIGURE THE CONNECTION FOR

OMMAND

ORK

TATION

Print a Configuration page.

The information on this page helps you locate the Fiery, if it is not on the same local subnet as your computer.

Start Command WorkStation.

The Available Servers dialog box appears. All servers found in the local subnet are displayed.

1-52 Installing User Software on a Windows Computer

If no Fiery servers were found, click the Manual tab to search by DNS name or IP address. Click Add to add the server to the Available Servers list.

Click the Auto Search tab and then click Advanced to search by either a range of

IP addresses or the IP address and subnet mask.

Click Search.

All available servers appear in the Available Servers list.

1-53 Using Fiery utilities for the first time

Select the Fiery server you want to use and click Add.

The selected Fiery server appears in the Login Server dialog box.

Click the server name.

The Log In dialog box appears.

Select Administrator, Operator, or Guest and click Log In.

Your computer is connected to the server.

1-54 Installing User Software on a Windows Computer

Modifying the configuration

O MODIFY THE CONFIGURATION

Start Command WorkStation.

The Login Server window appears.

Select the Fiery server for which you want to modify the configuration, and click Remove.

The Available Servers dialog box appears.

To add the modified Fiery server, follows steps

through 6 of the procedure,

“To configure the connection for Command WorkStation” on page 1-51.

To modify the connection to the Fiery, you must remove the server from the Login

Server list and follow the procedure for configuring the connection.

1-55 Installing color files from the User Software CD

Installing color files from the User Software CD

You can copy additional color files from the User Software CD to your hard disk.

Many of the files are PostScript files that you can download and print using

Fiery Downloader.

ICC folder ICC monitor settings file and a device profile specially designed for use with the Fiery and particular printer models. For instructions on installing, see

“Installing the ICC profiles on a

Windows computer” on page 1-56.

Cmyk.ps, an 11-page, letter-size PostScript file to use for reference when defining CMYK colors in applications.

Clrfiles folder

(inside the

English folder)

Pantone.ps, a 19-page, letter-size PostScript file that indicates the closest equivalent of PANTONE coated colors that the Fiery and your C9800 can produce. The method used to print the

Pantone.ps file differs depending on the Spot Color Matching setting. For more information, see the Printing Guide and the

Color Guide.

Rgb_01.doc, a file you can print from Microsoft Word 97 or later to view available RGB colors.

Rgb_02.ppt, a file you can print from PowerPoint 6.0 or later to view available RGB colors.

Calibrat folder

(inside the

English\Clrfiles folder)

Four PostScript files of color patches for obtaining measurements: Custom21.ps, Custom34.ps, Stand21.ps, and

Stand34.ps. The numbers in the file names refer to the number of patches on the page. The Custom files allow you to download measurement patches that incorporate the printer’s current calibration set. The Standard files allow you to download standard measurement patches that bypass the printer’s current calibration set. For information on using these files, see the

Color Guide.

OTE

These files are provided for expert users and should not be used for day-to-day calibration.

1-56 Installing User Software on a Windows Computer

Installing the ICC profiles on a Windows computer

The ICC profiles included in the Icm folder on CD2 are for use with ColorWise Pro

Tools. You can also use the ICC profiles with applications that support ICC standards, such as Photoshop. For most ICC-aware applications, the files must be installed in a folder named Color in the System folder. For use with ColorWise Pro Tools, you can copy the files to a folder of your choice.

You can upload additional ICC profiles with the Profile Manager in ColorWise

ProTools. For more information on uploading and using ICC profiles with ColorWise

Pro Tools, see Chapter 1 of the Color Guide.

O INSTALL THE

ICC

PROFILES ON A

INDOWS COMPUTER

On CD2, open the ICC folder.

To access this folder click Start>Run, and enter D:\ICC (where D: is the drive letter of your CD drive). If the Installer autoruns when you load the CD, click Exit to close it.

If you are using Windows 98/Me, copy the profiles to the Windows\System\Color folder on your hard disk.

If you are using Windows NT or Windows 2000, copy the profiles to the

Winnt\System32\Color folder on your hard disk.

OTE

If a folder named “Color” does not exist in the System32 folder, create one and install the profiles into it.

If you are using Windows XP/Server 2003, right-click the profile you want and click

Install Profile.

OTE

The profiles are installed automatically to the Windows\System32\spool\ drivers\color folder on your hard disk.

Loading the monitor settings file

The Efirgb.icm monitor settings file can be used in Photoshop, or other applications that support ICC profiles, to define a source color space for printing to the C9800.

These instructions assume you have installed the ICC profiles included on CD2. For more information, see the preceding section.

1-57 Installing color files from the User Software CD

The internal name of an ICC profile may vary slightly from its file name.

OTE

O LOAD THE

RGB W

ORKING

PACE PROFILE FOR

HOTOSHOP

Start Photoshop.

Choose Color Settings from the File menu and choose RGB Setup from the Color

Settings submenu.

In the RGB Setup dialog box, click Load.

For Windows 98/Me, browse to the Windows\System\Color folder, select Efirgb.icc, and then click Load.

For Windows NT 4.0 or Windows 2000, browse to the Winnt\System32\Color folder, select Efirgb.icc, and then click Load.

For Windows XP/Server 2003, browse to the Windows\System32\spool\driver\color folder, select Efirgb.icc, and then click Load.

The Efirgb v1f file is displayed in the RGB menu of the RGB Setup dialog box.

1-58 Installing User Software on a Windows Computer

Click OK.

For more information about ICC profiles, see your Photoshop documentation.

Loading the ICC printer device profile

This ICC profile defines the target color space for printing to the printer.

These instructions assume you have installed the ICC profiles included on CD2. For

more information, see “Installing the ICC profiles on a Windows computer” on page 1-56.

OTE

The internal name of an ICC profile may vary slightly from its file name.

O LOAD THE

ICC

PRINTER DEVICE PROFILE IN

HOTOSHOP

Start Photoshop.

Choose Color Settings from the File menu and choose CMYK Setup from the Color

Settings submenu.

In the CMYK Setup dialog box, choose ICC as the CMYK color model.

Select the profile that corresponds to the Fiery from the Profile menu.

Click OK.

For more information about ICC profiles, see your Photoshop documentation.

Loading monitor settings files and ICC device profiles in Photoshop 6.x

Once you have installed the Efirgb.icc monitor settings file and the ICC device profile for the Fiery, they can be loaded at the same time in Photoshop 6.x.

1-59 Installing color files from the User Software CD

O LOAD THE MONITOR SETTINGS FILE AND

ICM

DEVICE PROFILE

HOTOSHOP

Start Photoshop.

Choose Color Settings from the Edit menu and select Advanced Mode in the Color

Settings dialog box.

Choose EFI RGB from the RGB menu.

Choose the profile that corresponds to the Fiery from the CMYK menu.

1-60 Installing User Software on a Windows Computer

Installing the printer description files for Windows

The User Software CD contains printer description files for popular Windows applications. Adobe Pagemaker 5.0, 6.x, and 7.0 do not support automatic installation of printer description files from the Printers or Printers and Faxes Control Panel. To make the Fiery available in the Print and Page Setup dialog boxes of this application, copy printer description files to the appropriate location.

O COPY THE PRINTER DESCRIPTION FILES

On the User Software CD, open the English\Prntdrvr\Ps_drvr folder. Select the folder that corresponds to the system you are using.

For Windows 98/Me, select \Drivers\<language>\Win9598\ps.

For Windows NT 4.0, select \Drivers\<language>\nt40\ps.

For Windows 2000/XP/Server 2003, select \Drivers\<language>\Win2k_xp\ps.

Copy the printer description file “EF5U3324.PPD” to the appropriate location.

If you use

PageMaker 5.0

PageMaker 6.0

For PageMaker 6.5

For PageMaker 7.0

To this location

\ALDUS\USENGLSH\PPD4

\PM6\RSRC\USENGLSH\PPD4

\PM65\RSRC\USENGLSH\PPD4

\PM7\RSRC\USENGLSH\PPD4

2-1 Setting up the C9800 as a PostScript printer

Chapter 2:

Installing

User Software on a Mac OS

Computer

The general steps for installing the Fiery user software and setting up printing on a

Mac OS computer are as follows:

• Install the PostScript printer driver and printer description file.

• Set up the C9800 in the Chooser (Mac OS 9 or Mac OS X Classic mode) or in the

Print Center (Mac OS X Native mode).

OTE

The “Print Centre” is called “Printer Setup Utility” in OS X 10.3 and above.

• Install the Fiery utilities (Fiery Remote Scan, ColorWise Pro Tools, Fiery

Downloader, Command WorkStation LE, and Fiery Spooler).

• Configure the connection for Fiery utilities.

• Install the printer and screen fonts.

• Install the ColorSync profiles.

• Install additional color reference and application-specific files.

Setting up the C9800 as a PostScript printer

To set up the C9800 as a PostScript printer, you must install the PostScript printer driver and the printer description file that corresponds to your printer. The

PostScript printer driver and printer description files are provided on the Driver CD

(CD1). Printer drivers provide a way to communicate information on print jobs between your applications, the C9800, and any other PostScript printer connected to your computer.

Setting up Mac printer drivers and printer description files

Detailed instructions for Mac OS 9 are provided on CD1 in the

Mac OS 9:<language> folder.

Detailed instructions for Mac OS X are provided on CD1 in the Mac OS X folder.

2-2 Installing User Software on a Mac OS Computer

Installing Fiery software and fonts

The Mac OS installers function essentially the same for each type of software. Before you begin each installation, determine where you want to install each item on your hard disk. Otherwise, the software is placed by default as follows:

• ColorSync profiles—ColorSync Profiles folder

For ColorSync 2.5, copy the profiles from the Extras:ColorSync Profiles folder on

CD2 into the ColorSync Profiles folder inside your System folder.

• Fiery Spooler, Fiery Downloader, Command WorkStation LE, and ColorWise Pro

Tools—“Fiery” folder

• Fonts—System folder : Fonts folder

Mac fonts corresponding to those resident on the C9800 are provided on CD1 in the Extras:Fonts:OS 9 and Extras:Fonts:OS X folders. These can be installed on your Mac for use in applications.

O INSTALL

SOFTWARE

Insert the Utilities CD (CD2) in the CD drive and double-click the Installer icon of the item you want to install, and then follow the instructions in the installer dialog boxes.

If prompted, click Quit to close the software installer.

In order to use ColorWise Pro Tools, Fiery Link, or Fiery Spooler, you must have

Mac OS Runtime for Java (MRJ) installed on your computer.

If you do not have the appropriate MRJ installed, the installer automatically initiates the MRJ installation process.

The respective installer prompts the MRJ installation from the CD. MRJ 2.2.5 is provided on the Utilities CD (CD2). We recommend that you use the version of MRJ provided on the Utilities CD with the Fiery software.

If you have a newer version of MRJ (such as 2.2.6) already installed on your computer and experience some difficulty using the Fiery software, either remove or relocate the

MRJ files currently installed and reinstall the version of MRJ provided on CD2. Use the following procedure to uninstall MRJ.

2-3 Installing Fiery software and fonts

O UNINSTALL

OS R

UNTIME FOR

AVA

Locate the System Folder on your hard disk.

Inside the Extensions folder, locate MRJ Libraries and remove it or move it to another folder.

OTE

If you find the “MRJ Enabler” file under Extensions, remove it or move it to another folder.

Inside the Apple Extras folder, locate Mac OS Runtime for Java, and remove it or move it to another folder.

Restart your computer.

2-4 Installing User Software on a Mac OS Computer

Configuring a connection for ColorWise Pro Tools

The first time you use ColorWise Pro Tools, you are prompted to configure a connection to the C9800.

OTE

ColorWise Pro Tools are supported only over TCP/IP networks.

EFORE YOU BEGIN

• Print the Configuration page from the Printer Control Panel and note the IP address of the C9800.

Press the MENU keys until the Print Pages menu is displayed, then press ENTER to select this menu.

Press the MENU keys until CONFIGURATION is displayed, then press ENTER to print these pages.

The printer’s IP address is shown under Network Setup on the first configuration page.

O CONFIGURE A CONNECTION FOR

OLOR

ISE

OOLS

Start the utility by double-clicking its icon.

The Choose Printer Device dialog box appears.

2-5 Installing Fiery software and fonts

If you have previously configured a connection to the C9800, you are ready to use

ColorWise Pro Tools. If you have not configured a connection, click Add.

Enter the appropriate information for the C9800.

Nickname

—Enter a name for the C9800. It does not have to match the actual server name of the C9800.

OTE

The nickname cannot contain any of the following seven characters:

[ ] _ " ' <space> <tab>

Protocol

—TCP/IP is the only supported network protocol, so no selection is necessary.

Server Name

—Enter the IP address (or DNS or hosts name) of the Fiery.

New Device

—Enter the name of the device the Fiery is installed in: C9800. This device name appears in the Printer Setup section of the Configuration page.

OTE

Type C9800 exactly as shown because the device name is case-sensitive.

When you have added all the information, click Add.

With the device name selected in the Devices list, click OK.

The C9800 appears in the list of available servers. The first line of the entry displays the nickname you gave the server, followed by the protocol. The second line displays the device name.

Device name of the Fiery

(C9800)

2-6 Installing User Software on a Mac OS Computer

With the device name selected in the list of Available Servers, click Select to begin using ColorWise Pro Tools.

Modifying the configuration

Edit the configuration whenever there is any change in your original configuration, such as a change of IP address. Change the specific Fiery Setup information before using the following procedure to configure the connection.

O MODIFY THE CONFIGURATION

To edit information for a C9800 in the list of available servers, select the C9800 by its nickname and click Modify. Edit information in the Modify Server Settings dialog box as necessary, and click OK.

To add a new C9800 to the list of available servers, click Add. Configure the Add New

Server dialog box as outlined in steps 3 through 5 in the preceding procedure.

To remove a C9800 from the list of available servers, select the Fiery by its nickname and click Remove.

Fiery name and device name

(C9800)

2-7 Installing Fiery software and fonts

Configuring a connection for Fiery Spooler

Before you begin, print a Configuration page from the Printer Control Panel and note the IP address of the C9800. See

page 2-4 .

O CONFIGURE THE CONNECTION FOR

IERY

POOLER

Start the utility by double-clicking its icon.

The Chooser dialog box appears.

Click Option.

Click Add.

Enter the appropriate information for the C9800.

Name

—Enter the IP address (or DNS name) of the C9800.

New Device

—Enter the name of the device that the Fiery is installed in: C9800.

This device name appears in the Printer Setup section of the Configuration page.

OTE

Type C9800 exactly as shown because the device name is case-sensitive.

When you have entered all the information, click Add.

With the device name selected, click OK.

The C9800 appears in a list of configured servers.

2-8 Installing User Software on a Mac OS Computer

Click OK in the Configure dialog box.

The C9800 appears in a list of available servers.

Fiery name and device name

(C9800)

With the C9800 selected in the list of available servers, click OK to begin using

Fiery Spooler.

Modifying the configuration

Edit the configuration whenever there is any change to your C9800 or network, such as an IP address or device change. Change the specific Fiery Setup information before configuring the connection.

O MODIFY THE CONFIGURATION

In the Chooser dialog box, click Option.

To edit information for a C9800, select the C9800 by its IP address or DNS name and click Modify. Edit information in the Settings dialog box as necessary, and click OK.

To add a new C9800, click Add. Configure the Settings dialog box as outlined in steps

4 through 6 in the preceding procedure.

To remove a C9800, select the Fiery by its IP address or DNS name, and click Remove.

The list of available servers reflects the modifications you have made.

2-9 Installing Fiery software and fonts

Configuring a connection for Fiery Downloader

When you start Fiery Downloader, you must specify the connection to the C9800.

EFORE YOU BEGIN

• Print the Configuration page from the Printer Control Panel and note the AppleTalk

zone of the C9800. See page 2-4

O SPECIFY A

C9800

CONNECTION

Double-click the Fiery Downloader icon.

Select the AppleTalk zone in which the C9800 is located from the AppleTalk Zones list.

The available servers appear in the Servers list.

Fiery name and device name

(C9800)

Select the C9800 in the Servers list.

2-10 Installing User Software on a Mac OS Computer

Click Connect.

The Fiery Downloader dialog box appears.

For information on how to use Fiery Downloader, see the Printing Guide.

2-11 Installing Fiery software and fonts

Configuring the connection for Command WorkStation LE for Mac OS X

The first time you start Command WorkStation LE, you are prompted to configure the connection to the C9800.

EFORE YOU BEGIN

• Print the Configuration page from the Printer Control Panel and note the IP address of the C9800. See

page 2-4 .

O CONFIGURE THE CONNECTION FOR

OMMAND

ORK

TATION

Start Command WorkStation LE.

The Available Servers dialog box is displayed. All servers found in the local subnet are displayed.

OTE

The device name for the Fiery is C9800.

2-12 Installing User Software on a Mac OS Computer

If no Fiery servers were found, click the Manual tab to search by DNS name or IP address. Click Add to add the server to the Available Servers list.

If no Fiery servers were found, click the Auto Search tab and then click Advanced to search by either a range of IP addresses or the IP address and subnet mask.

Click Search.

2-13 Installing Fiery software and fonts

Select the Fiery server you want to use and click Add.

The selected Fiery server is displayed in the Login Server dialog box.

Click the server name.

The Log In dialog box appears.

Select Administrator, Operator, or Guest and click Login.

If prompted, enter the password for Administrator or Operator.

Your computer is connected to the server.

To modify the Command WorkStation LE connection to the Fiery, you must remove the server from the Login Server list and follow the procedure for configuring the connection.

2-14 Installing User Software on a Mac OS Computer

Installing color files from CD2

You can copy additional color files from the CD2 to your hard disk. Many of the files are PostScript files you can download and print using Fiery Downloader.

The Utilities CD (CD2) contains the following color files in the Extras folder:

ICC profiles

(inside the

ColorSync folder)

Mac Color Files folder (in the

<language> folder)

Install the ICC profiles into the ColorSync Profiles folder inside the System folder.

CMYK Color Reference.ps, an 11-page, letter-size PostScript file to use for reference when defining CMYK colors in applications.

PANTONE Book.ps, a 19-page, letter-size PostScript file that indicates the closest equivalent of PANTONE coated colors that your C9800 can produce. The method used to print the

PANTONE Book.ps file differs depending on the Spot Color

Matching setting. For more information, see the Printing Guide and the Color Guide.

Calibration folder

(inside the

<language>:

Calibration folder)

RGB page 01, a file you can print from Microsoft Word 97 or later to view available RGB colors.

RGB page 02, a file you can print from PowerPoint 6.0 or later to view available RGB colors.

Four measurements files of color patches: custom21.ps, custom34.ps, standard21.ps, and standard34.ps. The numbers in the file names refer to the number of patches on the page.

The Custom files are provided to allow you to download measurement patches that incorporate the printer’s current calibration set. The Standard files are provided to allow you to download standard measurement patches that bypass the printer’s current calibration set. For information on using these files, see the Color Guide.

These files are provided for expert users and should not be used for day-to-day calibration.

2-15 Installing color files from CD2

Loading ICC profiles

The ICC profiles installed are used with ColorWise Pro Tools and applications that support ICC standards.

These instructions assume that you have already installed the ICC profiles included on

CD2 inside the ColorSync folder. For more information, see

“Installing color files from CD2” on page 2-14.

OTE

The internal name of an ICC profile may vary slightly from its file name.

The following procedure describes installing the ICC profiles with ColorSync 4.0.

For more information about ColorSync, see your application’s documentation.

O SET THE

OLOR

YNC SYSTEM PROFILE

Choose Control Panels : ColorSync from the Apple Menu.

Select EFIRGB ICC from the System Profile list.

When selected as the ColorSync system profile, EFIRGB ICC sets the optimal source color space for printing to the Fiery. The color space set by the EFIRGB ICC profile is the same as that set by the EFIRGB setting of the RGB Source Profile print option.

OTE

The RGB Source Profile print option setting overrides the ColorSync system profile setting.

Close the ColorSync dialog box.

For more information about ICC profiles, see your Photoshop documentation.

2-16 Installing User Software on a Mac OS Computer

Loading the monitor settings file

The EFIRGB ICC monitor settings file can be used in Photoshop or other applications that support ICC profiles to define a source color space for printing to the Fiery.

O LOAD THE MONITOR SETTINGS FILE IN

HOTOSHOP

Start Photoshop.

Choose Color Settings from the File menu, and choose RGB Setup from the Color

Settings submenu.

In the RGB Setup dialog box, click Load.

Browse to the System : Preferences : ColorSync Profiles folder, select the EFIRGB ICC file, and then click Open.

OTE

If you are using ColorSync 2.5, the ColorSync profile is located in System

Folder : ColorSync Profiles.

The EFIRGB file appears as the selection.

Click OK.

2-17 Installing color files from CD2

Loading the ICC printer profile

The ICC printer profile enables RGB-to-CMYK conversions that are specific to the kind of printer you are using.

O LOAD THE

ICC

PRINTER PROFILE IN

HOTOSHOP

Start Photoshop.

Choose Color Settings from the File menu and choose CMYK Setup from the Color

Settings submenu.

In the CMYK Setup dialog box, choose ICC as the CMYK color model.

Select the profile that corresponds to the Fiery from the Profile menu.

Click OK.

For more information about ICC profiles, see your Photoshop documentation.

Loading monitor settings and the ICC device profile in Photoshop 6.x/7.x

In Photoshop 6.x and 7.x, you can load the monitor settings file and the ICC device profile at the same time.

O LOAD THE MONITOR SETTINGS FILE AND THE

ICC

DEVICE PROFILE IN

HOTOSHOP

/7.

Start Photoshop.

Choose Color Settings from the Edit menu and then choose Advanced Mode.

Choose EFI RGB from the RGB menu.

Choose the profile that corresponds to the Fiery from the CMYK menu.

Click OK.

For more information, see your Photoshop documentation.

2-18 Installing User Software on a Mac OS Computer

3-1 Setting up Fiery WebTools

Chapter 3:

Setting Up

Fiery WebTools

Fiery WebTools allow you to manage your Fiery remotely from the Internet or from your company’s intranet. The C9800 MFP has its own home page, from which you can select a variety of functions.

For more information on using Fiery WebTools, see the Printing Guide.

Setting up Fiery WebTools

In order for network users to access and use Fiery WebTools, you must set specific

Fiery options in Network Setup and Printer Setup. You also must prepare each user’s computer to communicate with the Fiery over the Internet or intranet.

For more information about Network Setup and Printer Setup, see Chapter 4 of the

Configuration Guide.

O SET UP CLIENT WORKSTATIONS TO USE

IERY

OOLS

Enable TCP/IP networking.

Make sure the workstation has a valid, unique IP address.

Make sure a supported Internet browser is installed on the computer.

For more information on supported browsers, see

“System requirements” on page -xi.

Make sure Java is enabled in your Internet browser.

For more information on setting up the Fiery and the network, see the

Configuration Guide.

3-2 Setting Up Fiery WebTools

4-1 On a Windows computer

Chapter 4:

Troubleshooting

This chapter provides troubleshooting tips.

On a Windows computer

Setting up printing on Windows NT 4.0 or Windows

2000/XP/Server 2003 computers

If you have problems installing the C9800 with Windows NT 4.0 or Windows

2000/XP/Server 2003, try installing another PostScript printer (such as the Apple

LaserWriter IIg), and then install the C9800. Installing another printer ensures that all files are properly installed and available. For instructions, see your Windows documentation.

For information about problems you may encounter using the PostScript Printer

Driver for Windows NT 4.0, see the Adobe README file (readme.wri) included in

\Drivers\UK_English\nt40\ps on the Drivers CD (CD1). For Windows

2000/XP/Server 2003, see your Windows 2000/XP/Server 2003 documentation.

Reinstalling the Adobe PostScript Printer Driver on

Windows 98/Me

If you are reinstalling the Adobe PostScript Printer Driver, delete any previous versions and related files before installation.

For additional information about problems you may encounter using the Adobe

Printer Driver for Windows 98/Me, see the Adobe README file (readme.wri) included in \Drivers\UK_English\w9598\ps on the Drivers CD (CD1).

4-2 Troubleshooting

Problems with the Fiery utilities on Windows computers

If you are experiencing problems with connections for the Fiery utilities, try the following:

Make sure the TCP/IP networking protocol is enabled.

Make sure the connection is configured correctly for your site.

To check the current configuration, start a Fiery utility and choose Open from the File menu. Select the C9800 and click Modify to see current settings. If the settings are incorrect, you can change them in this dialog box.

On a Mac OS computer

Setting up the Fiery in the Mac OS 9 Chooser

If Auto-setup does not work and you are prompted to select the printer description file, select the appropriate Fiery file in your System :Extensions :Printer Descriptions folder.

Installing screen fonts

If you experience problems installing the PostScript screen fonts from CD1 to the

System folder : Fonts folder, try the following:

Quit all applications and close all windows.

Create a new folder and name it “Uninstalled Fonts.”

This folder must be located outside the System folder.

Move fonts you are not using from the System folder : Fonts folder to the Uninstalled

Fonts folder.

4-3 On a Mac OS computer

Install the fonts from CD1 to a folder called CD fonts. Copy the fonts to the System folder : Fonts folder.

Create aliases to the System folder : Fonts folder and the Uninstalled Fonts folder.

Place both aliases on your desktop.

When necessary, use the aliases to open both folders and move fonts between them.

If you have any applications running, you must quit and restart them in order to view and use the newly installed fonts.

You can also try combining fonts from multiple suitcases into a single suitcase.

Setting up the Fiery in the Mac OS X Print Center

If Auto-setup does not work and you are prompted to select the printer description file, select the appropriate C9800 file on your hard disk in the System : Library :

Printers : PPDs : Contents : Resources : language folder (for example, en.lproj folder).