NEC NP43 Specification
広告
広告
======================================================================
Control Commands for NEC Projector (Basic) Rev 8.4.10a
Copyright (C) NEC Display Solutions, Ltd. 2002-2010
----------------------------------------------------------------------
Updated on August 4, 2010
----------------------------------------------------------------------
This file contains information about NEC projector control commands.
Model Name
GT60 : GT5000/GT6000 Series
GT50 : GT1150/GT2150 Series
HT : HT1000/HT1100 Series
HT10 : HT410/HT510 Series
LT180 LT180
LT30 : LT25/LT30/LT35 Series
LT : LT220/LT240/LT240K/LT260/LT260K/LT245/LT265 Series
LT80 : LT280/LT380 Series
MT70 : MT860/MT1060/MT1065/MT1075 Series
NP60 : NP40/NP50/NP60 Series
NP62 : NP41/NP61/NP62 Series
NP1000 : NP1000/NP2000 Series
NP3150 : NP1150/NP2150/NP3150/NP3151W Series
NP4000 : NP4000/NP4001 Series
NP905 : NP905/NP901W/VT800 Series
NP600 : NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S Series
VT : VT770 Series
VT70 : VT37/VT47/VT480/VT57/VT570/VT575/VT670/VT676 Series
VT80 : VT48/VT480/VT580 Series
VT90 : VT49/VT490/VT590/VT595/VT695 Series
VT700 : VT700
WT : WT600/WT610/WT615 Series
NP4100 : NP4100/NP4100W Series
NP3250 : NP1250/NP2250/NP3250/NP3250W Series
NP610 : NP310/NP410/NP410W/NP510/NP510W/NP510WS/NP610/NP610S Series
NP2200 : NP1200/NP2200 Series
NP216 : NP110/NP115/NP215/NP216 Series
NP64 : NP43/NP64 Series
======================================================================
Contents
1. Projector Control
2. Connection Method
3. Interface Conditions
4. List of Commands
5. Command Descriptions
6. Table of Response Error Codes
======================================================================
1. Projector Control
----------------------------------------------------------------------
NEC projectors make use of control commands that control the functions of the projector via connection with a personal computer or another device.
======================================================================
2. Connection Method
----------------------------------------------------------------------
The following 3 kinds of connection methods are available for sending and receiving control commands.
1. Serial connection using the serial port on the projector
A serial cable is required.
2. USB connection using the USB port on the projector
A USB cable is required.
3. LAN connection
3-1. LAN connection using a wired LAN card
A wired LAN card and LAN cable are required.
3-2. LAN connection using a wireless LAN card
A wireless LAN card is required.
3-3.LAN connection using the LAN port on the projector
A LAN cable is required.
3-4. LAN connection using a wireless LAN unit
A wireless LAN unit is required
Status of supported connection
(1) (2)
Serial Port USB Port
(3-1)
Wired
LAN Card
(3-2)
Wireless
LAN Card
(3-3)
Wired
LAN Port
(3-4)
Wireless
LAN Port
GT5000/GT6000
GT1150/GT2150
HT410/HT510
HT1000/HT1100
LT180
LT25/LT30/LT35
LT220/LT240/LT260
LT240K/LT260K
LT245/LT265/LT280/LT380
MT860/MT1060/MT1065/MT1075
NP40/NP50/NP60
NP41/NP61/NP62
NP43/NP64
NP1000/NP2000
NP1150/NP2150/NP3150/NP3151W
NP4000/NP4001
NP905/NP901W
NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S
VT770
VT37/VT47/VT470/VT57/VT570/VT575VT/670/VT676
VT48/VT480/VT580
VT49/VT490/VT590/VT595/VT695/VT700
VT700
VT800
WT600WT/610/WT615
NP4000/NP4001
NP1250/NP2250/NP3250/NP3250W
NP310/NP410/NP410W/NP510/NP510W/NP510WS/NP610/NP610S
NP1200/NP2200
NP4100/NP4100W
NP110/NP115/NP215/NP216
Yes : Supported
No: Not Supported
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
No
No
No
No
Yes
Yes
No
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
* A USB cable is supplied as standard with the MT860/1060/1065/1075.
* The GT5000/6000 does not come with a USB cable.
* Note that a connection method using the supplied USB cable is not supported for the LT220/240/260.
* The serial cable, LAN card and LAN cable are separately sold.
* The WT610 replaced the WT610 and uses the same command set.
(CAUTION)
Before making connections, be sure to invalidate the standby mode of the projector and set the "idle mode". The projector cannot use the control commands in the standby mode.
Setting method: Under projector [Projector Options] --> [Setup], enter a check for [Idle Mode] on Page 4.
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
No
No
Yes
No
No
No
No
Yes
Yes
No
Yes
No
No
Yes
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
====================================================================
3. Interface Conditions
----------------------------------------------------------------------
Serial connection
----------------------------------------------------------------------
The communications method conforms to the RS-232C standard.
Baud rate:
Data length:
38400 bps
(NP600 series, NP610 Series, VT60/VT70/VT80/VT90 series, VT700: 19200bps)
8 bits
Parity bit:
Stop bits:
Communications mode:
No parity
1 bit
Full duplex
The control connector is described below.
[ HT/LT/NP40/VT70/VT80/VT90/WT ]
The PC CONTROL connector is a mini DIN 8-pin connector.
1 To TxD of PC
2
3
4 To GND of PC
5
6
7 To RxD of PC
8
* 2, 3, 5, 6, and 8 are used inside the projector.
[ GT/LT80/MT/NP1000/VT (except VT70/VT80/VT90) ]
The PC CONTROL connector is a D-SUB 9-pin connector.
1
2 To TxD of PC
3 To RxD of PC
4
5 To GND of PC
6
7 To CTS of PC
8 To RTS of PC
9
====================================================================
4. Communication Frame
----------------------------------------------------------------------
On the LT/MT/SX/GT series projectors communication is done in a frame composed of header, data, and checksum.
The frame sent from the controller to the projector is referred to as a command, and the one sent from the projector to the command as an reply is referred to as a response.
The response has two types; Acknowledge (hereafter referred to as ACK) that recognizes a command and Negative Acknowledge (hereafter referred to as NAK) that fails to recognize a command.
+--------------+ Command +--------------+
| |-------------->| |
| Controller | | Projector |
| |<--------------| |
+--------------+ Response +--------------+
(ACK or NAK)
4-1. Frame Format
**********************************************************************
One frame comprises a header, a data portion, and a checksum.
Frame Format:
+-------------------------------+----------------------+--------+
| Header portion | Data portion |Checksum|
| | (Max. 4095 Bytes) | |
+-----+-----+-----+-------+-----+-----+-- --+-------+--------+
| 1 | 2 | 3 | 4 | 5 | 6 | ~ | n | m |
+-----+-----+-----+---+---+-----+-----+-- --+-------+--------+
| 8 | 8 | 8 | 4 | 12 | 8 | ~ | 8 | 8 |
| Bit | Bit | Bit |Bit| Bit | Bit | ~ | Bit | Bit |
+-----+-----+-----+---+---------+-----+-- ~ --+-------+--------+
| | | | |
| | | | +------------- Data length
| | | +-------------------- Model code
| | +------------------------- Projector ID
| +------------------------------- ID2
+------------------------------------- ID1
* ID1: (8 Bit)
This is an identification data assigned to each command.
Command :
This sets an identification data assigned to each command to send it.
( See each command description.)
Response :
This returns the 6th bit of received ID1 as HIGH.
For ACK it sends the 8th bit back as LOW (recognized); for NAK it
sends the 8th bit back as HIGH (not recognized).
* ID2: (8 Bit)
This is an identification data assigned to each command.
Command :
This sets an identification data assigned to each command to send it.
( See each command description.)
Response :
This returns the value of received ID2 as is.
* Projector ID : (8 Bit)
This is a projector ID for the projector that sends and receives frames.
Command :
This specifies a projector ID for the projector that sends and
receives commands. (individual notification)
Entering 00H or FFH becomes a common command for all the projectors.
(broadcast notification)
This is convenient for controlling multiple projectors at the same
time.
* When the controller is connected with the projector on a one-to-one
basis Broadcast notification is recommended.
* When the controller is connected with multiple projectors
To control a certain projector, use "individual notification".
For all others "broadcast notification" is recommended.
Response :
This returns the projector ID for a projector received regardless of
individual notification or broadcast notification.
CAUTION :
To notify individually, specifying a model code from the following
model codes is required.
* Model code: (4 Bit)
This is a model code for the projector that sends and receives frames.
Command :
This specifies a model code for the projector that sends commands.
(individual notification)
Entering 0000B or 1111B becomes a common command for all the
projectors. (broadcast notification)
This is convenient for controlling multiple projectors at the same
time.
* When the controller is connected with the projector on a one-to-one
basis Broadcast notification is recommended.
* When the controller is connected with multiple projectors
To control a certain projector, use "individual notification".
For all others "broadcast notification" is recommended.
Response :
This returns the model code for a projector received regardless of
individual notification or broadcast notification.
Table of Model codes
-------------------------------------------
0000B : (broadcast notification)
0001B : MT Series
0010B : LT Series
0011B : SX Series
0101B : GT Series
1111B : (broadcast notification)
CAUTION :
* When the model code is set to "broadcast notification", the command
becomes broadcast notification command, regardless of values of the
projector ID.
* Model code is specified using upper ranking 4 bits of data length.
The lower ranking 4 bits becomes the upper bits of data length.
* Data length : (12 Bit)
This is data length of data portion (unit:: byte).
Command :
This sets data length of data added to a command to send it.
( See each command description.)
Response :
This sets data length of data added to a response to send it.
( See each command description.)
CAUTION :
Data length is specified using total of 12 bits ( 0 - 4095) of 4 bits
of the 4th byte and 8 bits of the 5th byte.* The upper ranking 4 bits
of the 4th byte is model code.
* Data portion
This becomes data of data length specified in the data length portion.
Command :
This sets data added to a command to send it.
( See each command description.)
Response :
This sets data added to a response to send it.
( See each command description.)
* Checksum
This is lower ranking 8 bits of the sum total of the header and data portions of one transmit and receive data frame.
4-2. Data portion of response
**********************************************************************
For ACK
This returns ACK without adding data portion to the command that does not request data.
This returns ACK with adding data to the data portion for the command that requests data.
For NAK
This adds a cause of not accepting the command to data portion to return it.
(Example) Power On
Command:
02H 00H FFH F0H 00H CKS
NAK:
A2H 00H 01H 20H 02H DATA01 DATA02 CKS
Data Contents
----------------------------------------------------------------------
DATA01 Error types
00H : Not supported
01H : Parameter error
02H : Operation mode error
03H : Gain-related error
04H : Logo transfer error
DATA02 Error description
* When not supported
00H : Unknown command
01H : The current model does not support this function.
02H : This model is not compatible with the Switcher.
03H : This model is not compatible with the PC Viewer.
* When a parameter error occurs
00H : Unvalid values specified.
01H : Specified terminal is unavailable or cannot be selected
02H : Selected language is not available.
* When an operation mode error occurs
00H : Available memory reservation error
01H : External control working
02H : Operating memory
03H : Standby
04H : On Forced on-screen mute mode
05H : Link mode working
06H : Displaying a signal other than PC Viewer
07H : -No signal-
08H : Displaying a test pattern or PC Card Files screen.
09H : No PC card is inserted-
0AH : Memory operation failed
0BH : Switcher mode working
0CH : Displaying the Entry List
* When a gain adjustment error occurs
00H : Group number / sub category number is not correct.
01H : Selected gain is not available.
02H : Adjustment failed
* When a logo transfer error occurs
00H : Start is not requested
01H : Cannot process due to storing
02H : Exceeds the total number of blocks required
at the time of start
03H : The block number of transferred data is not consecutive.
USB connection
----------------------------------------------------------------------
This conforms to the USB1.1 standard.
Transfer speed: All speeds (supported)
Endpoint: Control transfer Endpoint 0
Device class: HID class (Ver1.1)
USB1.1 Standard: Universal Serial Bus Specification Revision 1.1
HID : Human Interface Device
Connector Specifications
1 VBUS (Power supply)
2 D- (- Signal)
3 D+ (+ Signal)
4 GND (Ground)
* Depending on the USB host controller in the personal computer, the USB connection may fail to operate. When using a USB hub, please use a self-powered type, not a bus-powered type. When using a USB hub, connection to the first stage of the USB hub is recommended.
LAN connection
----------------------------------------------------------------------
[ Wired LAN port ]
LAN interface
Communication speed: Auto setting (10/100Mbps)
Certified standard: IEEE802.3 (10BASE-T)
IEEE802.3u (100BASE-TX, Auto-Negotiation)
A LAN connector (8 male RJ-45 connector)
1 TD+
2 TD-
Transmit data (+)
Transmit data (-)
3 RD+
4
5
6 RD-
Receive data (+)
Not used
Not used
Receive data (-)
7
8
Not used
Not used
[ Wired/wireless LAN card ]
The LAN connections will differ depending on the commercial LAN card that is used.
- For information on supported LAN cards, visit:
Global: http://www.nec-pj.com/
[Port Number]
The TCP port number used is "7142".
====================================================================
4. List of Commands
----------------------------------------------------------------------
* Example for command
----------------------------------------------------------------------
Command name Example
----------------------------------------------------------------------
006. RUNNING SENSE
007. COMMON DATA REQUEST
009. ERROR STATUS REQUEST
015. POWER ON
016. POWER OFF
018. INPUT SW CHANGE
020. PICTURE MUTE ON
021. PICTURE MUTE OFF
022. SOUND MUTE ON
023. SOUND MUTE OFF
024. ONSCREEN MUTE ON
025. ONSCREEN MUTE OFF
030. GAIN ADJUST
030-2. VOLUME ADJUST
030-12. IMAGE MODE ADJUST
037. INFORMATION REQUEST
037-1. LAMP INFORMATION REQUEST
00H 81H 00H 00H 00H 81H
00H C0H 00H 00H 00H C0H
00H 88H 00H 00H 00H 88H
02H 00H 00H 00H 00H 02H
02H 01H 00H 00H 00H 03H
02H 03H 00H 00H 02H <DATA> CKS
02H 10H 00H 00H 00H 12H
02H 11H 00H 00H 00H 13H
02H 12H 00H 00H 00H 14H
02H 13H 00H 00H 00H 15H
02H 14H 00H 00H 00H 16H
02H 15H 00H 00H 00H 17H
03H 10H 00H 00H 05H <DATA> CKS
03H 10H 00H 00H 05H 05H <DATA> CKS
03H 10H 00H 00H 05H <DATA> CKS
03H 8AH 00H 00H 00H 8DH
03H 8CH 00H 00H 00H 8FH
037-2. LAMP INFORMATION REQUEST 2
037-4. LAMP INFORMATION REQUEST 3
037-7. LAMP INFORMATION REQUEST 4
038. LAMP MODE REQUEST
039. LAMP MODE SET
046. WXGA MODE SETTING REQUEST
049. WXGA MODE SETTING SET
050. REMOTE KEY CODE
060. GAIN PARAMETER REQUEST 2
077. MUTE CONTROL
078-1. SETTING REQUEST
078-2. RUNNING STATUS REQUEST
078-3. INPUT STATUS REQUEST
078-4. MUTE STATUS REQUEST
078-5. MODEL NAME REQUEST
078-6. MIRROR COVER STATUS REQUEST
079. FREEZE CONROL
097-198. PIP/SIDE BY SIDE REQUEST
098-196. WXGA MODE SETTING SET
098-198. PIP/SIDE BY SIDE SET
110. AUTO FUNCTIONS EXECUTE
03H 94H 00H 00H 00H 97H
03H 96H 00H 00H 02H <DATA> CKS
03H 9BH 00H 00H 03H <DATA> CKS
03H B0H 00H 00H 01H 07H BBH
03H B1H 00H 00H 02H 07H 00H BDH
03H B0H 00H 00H 01H DATA1 CKS
03H B1H 00H 00H 02H DATA1 DATA2 CKS
02H 0FH 00H 00H 02H 00H 00H 13H
03H 04H 00H 00H 03H <DATA> CKS
02H 1AH 00H 00H 02H <DATA> CKS
00H 85H 00H 00H 01H 00H CKS
00H 85H 00H 00H 01H 01H CKS
00H 85H 00H 00H 01H 02H CKS
00H 85H 00H 00H 01H 03H CKS
00H 85H 00H 00H 01H 04H CKS
00H 85H 00H 00H 01H 05H CKS
01H 98H 00H 00H 01H DATA01 CKS
03H B0H 00H 00H 02H C5H DATA CKS
03H B1H 00H 00H 02H DATA1 DATA2 CKS
03H B1H 00H 00H 03H C5H <DATA> CKS
03H B6H 00H 00H 01H <DATA> CKS
03H BAH 00H 00H 01H <DATA> CKS
00H BFH 00H 00H 01H <DATA> CKS
00H BFH 00H 00H 01H <DATA> CKS
111. AUTO ADJUST EXECUTE2
305-1. BASE MODEL TYPE REQUEST
305-3. PROJECTOR INFORMATION REQUEST
* Availability by Model
----------------------------------------------------------------------
Model No.
-------------------------
01 : LT240/LT260
02 : MT1060/MT1065/MT1075
03 : HT1000
04 : LT220
05 : MT860
06 : WT600/WT610/WT615
07 : GT5000
08 : LT240K/LT260K
09 : GT6000
10 : HT1100
11 : VT770
12: HT410/HT510 (HT10 Series)
13 : LT245/LT265
14 : LT280/LT380
15 : LT180
16 : VT37/VT47/VT470/VT57/VT570/VT575/VT670/VT676 (VT70 series)
17 : VT48/VT480/VT580 (VT80 Series)
18 : NP1000/NP2000 (NP1000 Series)
19 : NP1150/NP2150/NP3150/NP3151W (3150 Series)
20 : LT25/LT30/LT35 (LT30 Series)
21 : NP40/NP50/NP60 (NP60 Series)
22 : VT49/VT490/VT590/VT595/VT695 (VT90 Series)
23 : VT700
24: NP4000/NP4001 (NP4000 Series)
25: NP905/NP901W/VT800 (NP900 Series)
26: NP41/NP61/NP62 (NP62 Series)
27: NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S (NP600 Series)
28: GT1150/GT2150 (GT50 Series)
29: NP4100/NP4100W (NP4100 Series)
30: NP1250/NP2250/NP3250/NP3250W (NP3250 Series)
31: NP310/NP410W/NP510/NP510W/NP510WS/NP610/NP610S (NP610 Series)
32: NP1200/NP2200 (NP2200 Series)
33: NP110/NP115/NP215/NP216 (NP216 Series)
34: NP43/NP64 (NP64 Series)
Meaning of Symbols
--------------------------------------------------------------------
* Supported
! Is available depending on model's version
- Not Supported
Command Name
006. RUNNING SENSE
007. COMMON DATA REQUEST
009. ERROR STATUS REQUEST
015. POWER ON
016. POWER OFF
018. INPUT SW CHANGE
020. PICTURE MUTE ON
021. PICTURE MUTE OFF
022. SOUND MUTE ON
023. SOUND MUTE OFF
024. ONSCREEN MUTE ON
025. ONSCREEN MUTE OFF
030. GAIN ADJUST
030-2. VOLUME ADJUST
Volume
Bass
Treble
Balance
030-12. IMAGE MODE ADJUST
Aspect Ratio Input Signal
037. INFORMATION REQUEST
037-1. LAMP INFORMATION REQUEST
037-2. LAMP INFORMATION REQUEST 2
037-4. LAMP INFORMATION REQUEST 3
037-7. LAMP INFORMATION REQUEST 4
038. LAMP MODE REQUEST
039. LAMP MODE SET
046. WXGA MODE SETTING REQUEST
049. WXGA MODE SETTING SET
050. REMOTE KEY CODE
051. CARBON SAVINGS INFORMATION REQUEST
060. GAIN PARAMETER REQUEST 2
077. MUTE CONTROL
078-1. SETTING REQUEST
078-2. RUNNING STATUS REQUEST
078-3. INPUT STATUS REQUEST
078-4. MUTE STATUS REQUEST
078-5. MODEL NAME REQUEST
078-6. MIRROR COVER STATUS REQUEST
079. FREEZE CONTROL
110. AUTO FUNCTIONS EXECUTE
111. AUTO ADJUST EXECUTE2
097-198. PIP/SIDE BY SIDE REQUEST
098-196. WXGA MODE SETTING SET
098-198. PIP/SIDE BY SIDE SET
305.1 BASE MODEL TYPE REQUEST
305.3 PROJECTOR INFORMATION REQUEST
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
-
-
*
-
*
-
*
*
*
-
7
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
-
!
-
-
-
-
-
-
*
*
*
-
*
-
-
-
6
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
!
-
-
-
-
-
-
-
*
-
*
-
*
*
*
-
5
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
!
-
-
-
-
-
-
-
*
-
*
-
*
-
-
-
4
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
!
-
-
-
-
-
-
-
*
-
*
-
*
-
-
-
3
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
-
!
-
-
-
-
-
-
*
-
*
-
*
*
*
-
2
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
!
-
-
-
-
-
-
-
*
-
*
-
*
-
-
-
1
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
-
-
*
-
*
-
*
-
-
-
8
*
*
*
*
*
*
*
*
*
*
*
*
*
Availability by Model
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
-
-
*
-
*
-
*
*
*
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
-
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
-
-
*
-
*
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
-
-
*
-
*
-
-
-
*
*
*
*
*
*
*
*
*
*
-
-
-
-
-
-
-
-
-
*
-
-
*
-
-
-
-
*
-
-
*
-
-
-
-
-
-
*
*
-
-
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
-
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
*
*
*
-
*
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
-
-
*
-
*
*
*
*
*
*
*
-
-
-
-
-
-
-
*
*
-
-
-
*
*
*
*
*
*
*
*
-
*
-
-
-
-
-
-
*
-
-
-
-
-
-
-
-
-
-
*
-
-
-
-
-
-
-
-
-
-
-
-
*
*
*
*
*
*
*
*
*
*
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
*
-
-
-
-
-
*
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
*
-
-
-
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
-
-
*
-
-
*
-
-
-
-
*
-
-
-
-
-
-
-
-
-
*
*
-
-
!
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
-
-
-
-
-
*
*
*
-
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
-
-
*
-
*
*
*
*
*
*
*
-
-
-
-
-
*
*
!
!
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
!
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
*
*
*
*
*
*
-
-
*
*
-
-
-
-
-
-
*
*
-
*
-
-
-
-
-
*
-
-
*
-
-
-
-
-
-
-
*
-
-
-
-
*
*
!
-
-
*
*
*
*
*
*
*
*
*
-
-
*
-
-
-
-
*
*
-
*
-
-
-
-
-
*
-
-
*
-
-
-
-
-
-
*
-
-
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
!
*
-
*
-
*
-
*
*
-
-
-
-
-
-
-
-
*
-
-
-
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
-
*
!
!
*
-
-
-
-
-
-
*
-
*
-
*
* *
*
-
-
-
*
*
*
*
*
*
*
* *
*
*
*
*
*
*
-
*
*
*
*
* *
* *
* -
*
*
-
-
*
*
*
*
*
*
*
*
-
-
-
* *
-
*
* *
*
*
* *
*
*
* *
* *
* *
-
*
*
-
*
-
*
*
!
!
-
-
*
-
*
*
*
*
*
*
*
*
*
*
*
-
-
-
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* *
*
*
*
*
*
*
*
*
*
*
*
-
-
-
*
-
*
*
-
-
-
*
-
-
-
*
*
*
*
*
*
-
*
-
*
*
*
*
-
-
*
-
*
*
-
-
-
-
-
-
-
-
*
*
*
*
*
*
*
-
*
-
*
-
*
*
-
-
-
-
*
*
*
*
*
-
*
*
*
*
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* *
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
-
*
*
*
*
* *
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* *
*
*
*
-
-
*
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
-
-
*
-
-
-
-
-
*
*
*
*
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
-
*
*
*
-
*
*
*
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* *
* *
!
!
*
*
*
*
-
-
*
*
*
*
*
-
*
*
*
-
* *
*
*
-
*
-
* *
-
-
-
* *
* *
(!)
LT30 :
NP4000:
NP4001:
NP62 : firmware version 1.03 or later firmware version 1.04 or later firmware version 1.01 or later firmware version 1.02 or later
======================================================================
5. Command Descriptions
----------------------------------------------------------------------
Precautions with Inscriptions:
(*1) Projector ID
It is the value when forwarding a factory.
This reflects the "Projector ID" that has been set to the projector.
(*2) Model code: "xxH" inscription
This will differ depending on the projector.
In case of MT/NP1000/1050 series 10H
In case of LT/LT80 series
In case of NP61, NP62 series
20H
20H
In case of NP216 series
In case of VT series
In case of NP600 series
In case of NP610 series
In case of NP2200 series
20H
40H
40H
40H
40H
In case of GT series
In case of HT series
In case of WT series
In case of HT10 series
In case of LT180 series
In case of LT30 series
50H
60H
70H
D0H
D0H
D0H
In case of NP60 series
In case of NP4000, 4100 series
D0H
80H
In case of NP905/NP901W/VT800 90H
(*3) Checksum: "CKS" inscription
This is the value of the lower 8 bits of the results calculated in byte units from all of the data up to the immediately preceding data.
Example:
20H 81H 01H 60H 01H 00H 03H
+ + + + + + = CKS
(*4) Response error number
This is the value of the error number at the time of an error.
See "NAK" of "6-2. Data portion of response".
(*5) Term “RGB” and “COMPUTER”
On the HT1100, VT770, LT245/ LT265/ LT280/ LT380, NP1000/NP2000, NP1150/NP2150/NP3150/NP3151W,
NP1250/NP2250/NP3250/NP3250W, NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W,
NP905/NP901W/VT800, LT25/LT30/LT35, VT48/VT480/VT580, VT49/VT490/VT590/VT595/VT695/VT700,
NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S,
NP310/NP410/MP410W/NP510/NP510W/NP610WS/NP610/NP610S and
NP40/NP50/NP60/NP41/NP61/NP62/NP43/NP64, the term "RGB connector" has been changed to "COMPUTER".
(*6) Term “DVI” and “COMPUTER”
On the LT380, NP1000/NP2000, NP1150/NP2150/NP3150/NP3151W, NP1250/NP2250/NP3250/NP3250W,
NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W,
NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S,
NP310/NP410/MP410W/NP510/NP510W/NP610WS/NP610/NP610S and VT595/VT695/VT700, the term "DVI connector" has been changed to "COMPUTER".
006. RUNNING SENSE
**********************************************************************
Function:
This command acquires the operation mode of the projector.
Command:
00H 81H 00H 00H 00H 81H
Response: At the time of a success
20H 81H 01H xxH 01H DATA01 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Status of operation
Bit 7: Power On/Off processing
0 = No execution (Normal condition)
1 = During execution
Bit 6: Selecting signal processing
0 = No execution (Normal condition)
1 = During execution
Bit 5: Cooling processing
0 = No execution (Normal condition)
1 = During execution
Bit 4: External control mode
0 = OFF
1 = ON
Bit 3: No Power-Off period
0 = Power-Off Possible (Normal condition)
1 = Power-Off Impossible
Bit 2: Reserved
Bit 1: Projector status
0 = Idling
1 = Power On
Bit 0: Reserved
Response: At the time of a failure
A0H 81H 01H xxH 02H DATA1H DATA02 CKS
(*1) (*2) (*4) (*3)
007. COMMON DATA REQUEST
**********************************************************************
Function:
This command acquires all of the detailed conditions of the projector.
Command:
00H C0H 00H 00H 00H C0H
Response: At the time of a success
20H C0H 01H xxH 80H DATA01 .. DATA128 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Projector type
See DATA70..71
08H : NP4000 Projector
11H : NP62 Projector
DATA02 Projector ID
DATA02
1 .. 64 NP4000
1 .. 254 NP62/NP64
1 .. 254 NP216
DATA03 Reserved
DATA04 Projector status
00H: Idling
01H: Power On
DATA05 Cooling processing
00H: No execution (Normal condition)
01H: During execution
DATA06 Indication signal number (Entry list number - 1)
0 .. 199
DATA07 Type 1 of input terminal to be selected (!1)
01H : 1
02H : 2
03H : 3
04H : 4
05H : 5
DATA08 Type 2 of input terminal to be selected (!1)
01H : RGB (*5)
02H : VIDEO
03H : S-VIDEO
04H : COMPONENT
05H : Reserved
06H : DIGITAL (*6)
07H : VIEWER
08H : SLOT1
09H : SLOT2
DATA09 Indication signal type
* Valid only when Type 2 of input terminal is 02H or 03H
x0H : NTSC3.58
x1H : NTSC4.43
x2H : PAL
x3H : PAL60
x4H : SECAM
x5H : B/W60
x6H : B/W50
x7H : PALNM
x8H : NTSC3.58 LBX
x9H : NTSC3.58 SQZ
xDH : NTSC
xEH : PAL-M
xFH : PAL-N
* x: undefined
DATA10 .. 12 Reserved ( undefined )
DATA13 .. 20 Horizontal frequency of the indication signal(string)
("000.00" kHz + NULL(0)+ NULL(0) )
DATA21 .. 28 Vertical frequency of the indication signal(string)
("000.00" Hz + NULL(0)+ NULL(0) )
DATA29 Picture mute
00H : OFF
01H : ON
DATA30 Sound mute
00H : OFF
01H : ON
DATA31 .. Reserved
DATA32 Freeze Status (!2)
00H : OFF
01H : ON
FFH : Not Supported
DATA33 Test pattern display 1
00H : No display (Normal condition)
00H Other : Displaying (Pattern ID)
Pattern ID Pattern Name MT LT LT180 LT80 HT GT WT VT NP1000 NP3150 NP905 NP4000 NP4100 NP62 NP64 NP3250 NP216
08H
09H
0AH
17H
18H
19H
1DH
02H
03H
04H
05H
06H
07H
Cross Hatch
Gray Bars
Raster(0%)
Raster(25%)
Raster(50%)
Raster(100%)
Focus
Raster Blue
Gray Raster 30 * *
Gray Raster 10 * *
RAMP WBRG x *
Blue Raster 60 x *
Cross Hatch 3 * *1
* : Supported x : Not supported
*1: Only LT240K/260K x
* *
* *
* *
* *
* *
*
*
*
* x
*
*
*
*
*
*
* x
*
*
*
*
* x
*
*
*
*
*
*
*
*
* x x
*
*
*
*
*
*
* x
*
*
*
*
* x
*
*
*
*
* x
*
*
*
*
*
* * * * x * x *
* * * *
* * * *
* x * x
* x * x x * * * x
*
*
*
*
*
*
*
*
* x x
*
*
*
*
*
*
* x
*
*
* x x x
*
*
*
*
*
* x
*
*
* x x x
* x
*
*
*
* x
*
*
* x
* x
* x
*
*
*
* x
*
*
* x
* x
* x
* x x
* x
*
*
*
*
* x
* x
* x x
* x
*
*
*
*
* x
*
*
*
*
*
* x
*
*
* x x x
* x
*
* x
*
*
*
X
*
*
*
*
DATA34 Test pattern display 2
FFH: No display (Normal condition)
FFH Other: Displaying
Bit 2: BLUE pattern
0 = OFF
1 = ON
Bit 1: GREEN pattern
0 = OFF
1 = ON
Bit 0: RED pattern
0 = OFF
1 = ON
DATA35 .. 50 Reserved
DATA51 .. 65 User registration name ( 14 characters + NULL )
DATA66 Forced On-screen mute
00H : OFF
01H : ON
DATA67 On-screen display
00H : No display
01H : Displaying
DATA68 Selecting signal processing
00H : No execution (Normal condition)
01H : During execution
DATA69 Status of operation
00H : Idling
04H : Power On
05H : Cooling
06H : Idling (Error occurrence)
Other than above: (nondisclosure)
Internal use of code during a state transition period
DATA70 .. 71 Projector type
11H
11H
12H
12H
12H
12H
12H
12H
12H
10H
11H
11H
11H
11H
11H
11H
10H
10H
10H
10H
10H
10H
10H
10H
02H
02H
02H
02H
03H
03H
03H
04H
04H
Data01
01H
01H
01H
01H
02H
02H
10H
10H
10H
10H
10H
10H
10H
04H
04H
05H
05H
06H
00H
01H
00H
00H
00H
06H 00H
08H 00H
08H 00H
08H 01H
00H
00H
01H
02H
03H
04H
00H
02H
00H
00H
01H
00H
00H
00H
00H
01H
Data70 Data71
00H
01H
03H
03H
02H
00H
00H
01H
03H
06H
03H
03H
03H
05H
06H
06H
04H
06H
07H
01H
01H
03H
03H
03H
04H
03H
05H
MT1060/MT1065
MT860
MT1075
NP1000/NP2000
LT240/LT260
LT220
LT240K/LT260K
LT245/LT265
LT380
LT280
VT770
VT80 Series
VT90 Series
GT1150
GT2150
GT5000
GT6000
HT1000
HT1100
WT600
WT610/WT615
08H
09H
09H
09H
VT700
NP600
NP500
NP500 W
09H
09H
NP400
NP300
10H NP610
10H NP510
10H NP510W
10H NP410
10H NP310
10H NP610S
10H NP510WS
10H NP410
11H NP2200
02H
00H
01H
00H
02H
03H
04H
01H
02H
03H
05H
07H
08H
09H
01H
00H
03H
00H
01H
00H
01H
02H
00H
01H
12H
12H
08H
08H
09H
09H
09H
10H
10H
11H NP1200
00H NP41/61
00H NP62
11H
11H
11H
11H
NP215
NP115
NP110
NP216
NP64
NP43
NP1150/NP2150/NP3150
NP3151W
NP905
NP901W
VT800
NP1250/NP2250/NP3250
NP3250W
DATA72 PC Card insertion
00H : Not inserted
01H : Inserted
DATA73 USB Mouse connection
00H : Not connected
01H : Connected
DATA74 Entry list type
01H : Default
02H : User
DATA75 .. 82 Reserved
DATA83 On-screen mute
00H : OFF
01H : ON
DATA84 Reserved
DATA85 Indicate Contents
00H = Picture signal displaying
01H = No signal
02H = Viewer displaying
03H = Test pattern displaying
04H = LAN displaying
DATA86 .. 128 Reserved
Response: At the time of a failure
A0H C0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
(!1) VT700/NP600 series
Selected input terminal Data 07
RGB or RGB1 (*5) 1 (01H)
Data08
RGB (01H)
RGB2 (*5)
Video
S-Video
2 (02H) RGB (01H)
1 (01H) VIDEO (02H)
1 (01H) S-VIDEO (03H)
Component
Component
2 (02H) COMPONENT (04H)
3 (03H) COMPONENT (04H)
DVI or DVI(Digital) (*6) 1 (01H) DIGITAL (06H)
HDMI 1 (01H) DIGITAL (06H)
Viewer
LAN
Slot1-1
Slot1-2
Slot2-1
Slot2-2
RGB(Video)
RGB(S-Video)
1 (01H)
2 (02H)
1 (01H)
2 (02H)
2 (02H)
2 (02H)
VIEWER (07H)
VIEWER (07H)
1 (01H) SLOT1 (08H)
2 (02H) SLOT1 (08H)
SLOT2 (09H)
SLOT2 (09H)
VIDEO (02H)
S-VIDEO (03H)
Supplement:
(!2) only the NP600 series is compatible.
009. ERROR STATUS REQUEST
**********************************************************************
Function:
This command acquires the error information occurring with the projector.
Command:
00H 88H 00H 00H 00H 88H
Response: At the time of a success
20H 88H 01H xxH 0CH DATA01 .. DATA12 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
* The various bits are normal is "0" and error is "1".
* "None" is "0" fixation.
DATA01 Error Status (1)
bit0 : Lamp cover error
bit1 : Temperature error(Bimetal)
bit2 : None
bit3 : None
bit4 : Fan error
bit5 : Power error
bit6 : Lamp(or Lamp1) error
bit7 : Lamp(or Lamp1) has reached its end of life
DATA02 Error Status (2)
bit0 : Lamp(or Lamp1) has been used beyond its limit
bit1 : Formatter error
bit2 : Lamp2 error
bit3 : None
bit4 : None
bit5 : None
bit6 : None
bit7 : None
DATA03 Error Status (3)
bit0 : None
bit1 : FPGA error
bit2 : Temperature error(Sensor)
bit3 : Lamp(or Lamp1) housing error (!)
bit4 : Lamp(or Lamp1) data error (!)
bit5 : Mirror cover error
bit6 : Lamp2 has reached its end of life
bit7 : Lamp2 has been used beyond its limit
DATA03 Error Status (4)
bit0 : Lamp2 housing error
bit1 : Lamp2 data error
bit2 : High temperature due to dust pile-up
bit3 : A foreign object sensor error
bit4 : Pump error
bit5 : None
bit6 : None
bit7 : None
DATA05 .. 12 Reserved
Response: At the time of a failure
A0H 88H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
(!) LT/LT80/HT: "None"
015. POWER ON
**********************************************************************
Function:
This command switches on the main power of the projector.
Command:
02H 00H 00H 00H 00H 02H
Response: At the time of a success
22H 00H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 00H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
The projector does not accept the other command during power on processing.
016. POWER OFF
**********************************************************************
Function:
This command switches off the main power of the projector.
Command:
02H 01H 00H 00H 00H 03H
Response: At the time of a success
22H 01H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 01H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
The projector doesn't accept the other command during power off processing. (It contains a cooling period.)
018. INPUT SW CHANGE
**********************************************************************
Function:
This command switches the input terminal or the entry list.
Command:
02H 03H 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Switching object
00H : Entry List
01H : Input terminal
DATA02 Switching number
---------------------------------------------------------
When the switching object is the "Signal list", the signal list number is specified. (0…99)
---------------------------------------------------------
When the switching object is the "Input connector", the input connector number is specified.
Terminal Terminal
Number Name MT LT LT180 LT80 HT GT WT VT NP1000/3150 HT10 LT30 NP40 NP4000/4100 NP905 NP600 NP62/64 NP3250 NP610 NP2200 NP215 NP216
01H
02H
02H
06H
0BH
10H
11H
12H
1AH
1AH
1AH
1FH
20H
07H
0CH
24H
25H
29H
2AH
RGB1(RGB)
RGB2 (!1)
*
*
*
*
DVI(ANALOG) (!2) x x
Video
S-Video
Component
Component
Component
DVI (*6) (!2)
DVI(DIGITAL)(*6)
HDMI
Viewer
LAN
RGB(Video)
RGB(S-Video)
SLOT1-1
SLOT1-2
SLOT2-1
SLOT2-2
*
* x x x
* x x
*
* x x x x x x
* *
* * x x x x x x x x x x x x
* x x
*
*
*
* x
* x x
* x x x x x x x
*
* x
*
*
* x x x
* x
*
* x x x x x x
* * * * x * x * x x
* *
* * x *
* * x *
* x
*
*
* x x x
* x x x x x x *
* x x *
* x x x x x
*
*
*
*
* x x * x x x * x x x * x x x * x x x * x x x * x x
* : Supported x : Not supported
(!): The MT860/LT280 does not support a DVI connector.
(!!) HT1000
(!!!) HT410/HT510/HT1100
(!!!!) VT770 support Component and Viewer
(!1) VT470/VT470JY/VT570/VT670/VT575/VT676/VT480/VT580
(!2) VT595/VT695/VT700/NP300/NP400/NP500/NP500W/NP600/NP500WS/NP600S
(!3) NP62/NP64 only (not available on NP41/NP43/NP61 x x x
* x
*
*
*
*
* x x x x x x
*
* x
* x x x x
*
* x
* x x x x x x x x x x x x x x x
*
* x
* x x x x x x x x x x x x x x x
*
* x
* x x x x x x x x x x x x
* x x
*
*
*
*
* x x x x x x x x x x x x x
*
*
* x
*
* x x x x x x
*
* x x
*
* x x
*
* x
* x
* x x x x x
* x x x x x x x
*
* x
* x x
* (!3) x x x x x x x x x x
* x
*
*
*
*
* x x x x x x
*
* x x x x
* x
*
* x
*
* x x x x x x x x x x x x
* x
*
* x
*
* x x x x x x x x x x x x x x
*
* x
* x x x x x x x x x x x x x x x
*
* x
*
* x x x x x x x x x
(!!)
(!!!)
(!!!!)
(!)
(!)
(!!!!)
Response: At the time of a success
22H 03H 01H xxH 01H DATA01 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
FFH : Error
Response: At the time of a failure
A2H 03H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Command example:
* When switch to the Video connector
02H 03H 00H 00H 02H 01H 06H 0EH
020. PICTURE MUTE ON
**********************************************************************
Function:
This command blanks the picture.
Command:
02H 10H 00H 00H 00H 12H
Response: At the time of a success
22H 10H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
* Picture mute is cancelled for the following:
Input connector switching
Video signal switching
021. PICTURE MUTE OFF
**********************************************************************
Function:
This command cancels the blank picture condition.
Command:
02H 11H 00H 00H 00H 13H
Response: At the time of a success
22H 11H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 11H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
022. SOUND MUTE ON
**********************************************************************
Function:
This command mutes the sound.
Command:
02H 12H 00H 00H 00H 14H
Response: At the time of a success
22H 12H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 12H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
* Sound mute is cancelled for the following:
Input connector switching
Video signal switching
Volume adjustment
023. SOUND MUTE OFF
**********************************************************************
Function:
This command cancels the sound muting.
Command:
02H 13H 00H 00H 00H 15H
Response: At the time of a success
22H 13H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 13H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
024. ONSCREEN MUTE ON
**********************************************************************
Function:
This command blanks the on-screen display.
Command:
02H 14H 00H 00H 00H 16H
Response: At the time of a success
22H 14H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 14H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
* Onscreen mute is cancelled for the following:
Input connector switching
Video signal switching
025. ONSCREEN MUTE OFF
**********************************************************************
Function:
This command cancels the blanking of the on-screen display.
Command:
02H 15H 00H 00H 00H 17H
Response: At the time of a success
22H 15H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 15H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
[030. GAIN ADJUST]
**********************************************************************
*direct setting of volume
*volume increment/decrement
*direct setting of brightness
*brightness increment/decrement
*direct setting of color
*color increment/decrement
*direct setting of contrast
*contrast increment/decrement
*direct setting of sharpness
*sharpness increment/decrement
*direct setting of tint
*tint increment/decrement
brightness
contrast
color
tint<hue>
sharpness
Not supported "LT170","VT60 series","VT70 series","VT80 series”, “VT90 series"
Not supported "HT410/HT510","LT180/LT25/LT30/LT35"
volume
Not supported "LT170","VT60 series","VT70 series" (except "VT80 series, VT90 series")
Not supported "HT410/HT510","LT180/LT25/LT30/LT35"
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
DATA01 : 00H (Brightness)
01H (Contrast)
02H (Color)
03H (Tint<Hue>)
04H (Sharpness)
05H (Volume)
DATA02 : FFH (except "Volume")
00H ("Volume" only)
DATA03 : 00H (direct settings)
01H (increment/decrement)
DATA04 : lower data (8bit)
DATA05 : upper data (8bit)
ex.1) volume direct setting (value = 20)
DATA01 : 05H (Volume)
DATA02 : 00H ("Volume" only)
DATA03 : 00H (direct setting)
DATA04 : 14H (lower data : 20 = 0014<Hex>)
DATA05 : 00H (upper data : 20 = 0014<Hex>)
ex.2) brightness increment (value = +1)
DATA01 : 00H (Brightness)
DATA02 : FFH (except "Volume")
DATA03 : 01H (increment/decrement)
DATA04 : 01H (lower data : +1 = 0001<Hex>)
DATA05 : 00H (upper data : +1 = 0001<Hex>)
ex.3) contrast decrement (value = -1)
DATA01 : 01H (Contrast)
DATA02 : FFH (except "Volume")
DATA03 : 01H (increment/decrement)
DATA04 : FFH (lower data : -1 = FFFF<Hex>)
DATA05 : FFH (upper data : -1 = FFFF<Hex>)
030-2. VOLUME ADJUST
**********************************************************************
Function:
This command sets the volume.
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 05H fixed
DATA02 Setting items
00H : Volume
01H : Bass
02H : Treble
03H : Balance
DATA03 Setting mode
00H : Absolute value specification
01H : Relative value specification
DATA04 Setting Value (Lower ranking 8 bits)
DATA05 Setting Value (Upper ranking 8 bits)
Response: At the time of a success
23H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Results
0000H : Normal
0000H Other : Error
Response: At the time of a failure
A3H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Command example:
* Setting Volume to "10"
03H 10H 00H 00H 05H 05H 00H 00H 0AH 00H 27H
030-12. IMAGE MODE ADJUST
**********************************************************************
Function:
This command adjusts the Image Mode.
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Adjustment items
DATA01 DATA02 Adjustment items
18H 00H
DATA03 Adjustment mode
Aspect Ratio Input (!)
00H : Absolute value specification
01H : Relative value specification
DATA04 Adjustment value (Lower ranking 8 bits)
DATA05 Adjustment value (Upper ranking 8 bits)
Response: At the time of a success
23H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Results
0000H : Normal
0000H Other : Error
Response: At the time of a failure
A3H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Command example:
* Setting the Aspect Ratio to Letter Box (Wide Zoom)
03H 10H 00H 00H 05H 18H 00H 00H 01H 00H 31H
(!) Method of Specifying the Absolute Value of Special Adjustment Values
Aspect Ratio 4:3 (Window)
Aspect Ratio Normal / Auto (NP600, NP610, NP2200, NP62, NP64, NP216 Series)
Aspect Ratio 1.25:1(5:4)
Aspect Ratio Letter Box
Aspect Ratio 1.33:1(4:3)
Aspect Ratio Wide Zoom (NP600, NP610, NP2200, NP62, NP64, NP216 Series)
Aspect Ratio Wide Screen
Aspect Ratio 1.78:1(16:9)
Aspect Ratio Cinema / 16:9 (NP600, NP610, NP2200, NP62, NP64, NP215 Series)
Aspect Ratio Crop
Aspect Ratio Wide Zoom (NP4000 Series) (NP4100 Series)
Aspect Ratio Native (NP600, NP610, NP2200, NP62, NP64, NP216 Series)
Aspect Ratio 1.85:1
Aspect Ratio Zoom
Aspect Ratio 4:3 Fill
Aspect Ratio 4:3 (NP600 Series)
Aspect Ratio 2.35:1
Aspect Ratio Normal
Aspect Ratio Auto (NP4000 Series) (NP4100 Series)
Aspect Ratio 15:9 (NP600, NP610, NP2200, NP216 Series)
Aspect Ratio Full
Aspect Ratio 16:10 (NP600, NP610, NP2200, NP216 Series)
Aspect Ratio Zoom
Aspect Ratio Letter Box (NP600, NP610, NP2200, NP216 Series)
Aspect Ratio Cinema
Aspect Ratio V-Zoom
Aspect Ratio Stadium
Aspect Ratio 5:4
Aspect Ratio 16:10
Aspect Ratio 15:9
Aspect Ratio Native (NP4000 Series) (NP4100 Series)
DATA04 DATA05
06H
06H
07H
07H
08H
09H
03H
03H
04H
04H
04H
05H
05H
05H
02H
02H
02H
03H
03H
03H
00H
00H
00H
01H
01H
01H
0AH
0BH
0CH
0DH
0EH
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
037. INFORMATION REQUEST
**********************************************************************
Function:
This command acquires the projector information.
Command:
03H 8AH 00H 00H 00H 8DH
Response: At the time of a success
23H 8AH 01H xxH 62H DATA01 .. DATA98 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 49 : Projector name (NULL termination character string)
DATA50 .. 82 : Reserved
DATA83 .. 86 : Lamp Hour Meter (second) (!)
DATA87 .. 90 : Filter Usage (second)
DATA91 .. 94 : Panel Usage (second)
DATA95 .. 98 : Projector Usage (second)
Response: At the time of a failure
A3H 8AH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
(!) Lamp Hour Meter
This is the timer for normal lamp mode conversion.
Lamp Timer Acquisition Examples
DATA83 DATA84 DATA85 DATA86 : Lamp Timer
00H 00H 00H 00H : Total 0 seconds
C0H 65H 52H 00H : Total 5400000 seconds/3600 = 1500 hours
00H E4H 57H 00H : Total 5760000 seconds/3600 = 1600 hours
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA86 DATA85 DATA84 DATA83 (005265C0)
3) Change from HEX to Decimal - value will change to 5400000 seconds
* The projector's hours of use is displayed in terms of Normal mode values.
It is also displayed with truncated a number after decimal point.
037-1. LAMP INFORMATION REQUEST
**********************************************************************
Function:
This command acquires the lamp information (in terms of Normal mode (values) of projector.
Command:
03H 8CH 00H 00H 00H 8FH
Response: At the time of a success
23H 8CH 01H xxH 10H DATA01 .. DATA16 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 04 : Lamp Hour Meter(Normal mode) (second)
DATA05 .. 08 : Reserved
DATA09 .. 12 : Lamp Use Warning Starting Time(Normal mode) (second)
DATA13 .. 16 : Lamp Use Prohibited Time(Normal mode) (second)
Response: At the time of a failure
A3H 8CH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
Example for acquiring remaining lamp time (in terms of Normal mode values)
: Lamp Hour Meter (Normal mode)
DATA01 DATA02 DATA03 DATA04
30H 2AH 00H 00H : 10800 seconds
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA04 DATA03 DATA02 DATA01 (00002A30)
3) Change from HEX to Decimal - value will change to 10800 seconds
: Starting time for lamp usage warning message (in terms of Normal mode values)
DATA09 DATA10 DATA11 DATA12
00H DDH 6DH 00H : 7200000 second
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA12 DATA11 DATA10 DATA09 (006DDD00)
3) Change from HEX to Decimal - value will change to 7200000 seconds
Lamp remaining time (in terms of Normal mode values)
= (7200000 - 10800) / 3600 = 1997 hour
037-2. LAMP INFORMATION REQUEST 2
**********************************************************************
Function:
This command acquires lamp remaining amount.
Command:
03H 94H 00H 00H 00H 97H
Response: At the time of a success
23H 94H 01H xxH 05H DATA01 .. DATA05 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 04 Reserved
DATA05 lamp remaining amount (100% to -10%)
Response: At the time of a failure
A3H 94H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
037-4. LAMP INFORMATION REQUEST 3
**********************************************************************
Function:
This command acquires the information on the projector lamp in Eco mode.
Command:
03H 96H 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Target
00H : Lamp1
01H : Lamp2
DATA02 item
00H : Lamp Hour Meter (second) (!)
01H : Lamp usage time (second) (!!)
04H : lamp remaining amount until lamp warning message
(100% to -10%)
05H : Lamp counter (Normal mode) (second) (!!!)
06H : Lamp counter (Eco mode) (second) (!!!)
08H : Remaining time until lamp warning message starts
to appear (in terms of specified values)
09H : Remaining time until lamp warning message starts
to appear (in terms of Normal mode values)
0AH : Remaining time until lamp warning message starts
to appear (in terms of Eco mode values)
10H : Remaining time until inhibition of lamp usage
(in terms of specified values)
11H : Remaining time until inhibition of lamp usage
(in terms of Normal mode values)
12H : Remaining time until inhibition of lamp usage
(in terms of Eco mode values)
Response: At the time of a success
23H 96H 01H xxH 06H DATA01 .. DATA06 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 same values as DATA01 of the command
DATA02 same values as DATA02 of the command
DATA03 .. 06 Acquired information
Response: At the time of a failure
A3H 96H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
* In case of acquiring lamp's use of hours
03H 96H 00H 00H 02H 00H 01H 9CH
Example of acquisition
DATA03 DATA04 DATA05 DATA06: lamp's use of hours
50H 46H 00H 00H: 18000 seconds
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA06 DATA05 DATA04 DATA03 (00004650)
3) Change from HEX to Decimal - value will change to 18000 seconds
Lamp's use of hours = 18000/3600 = 5 hours
* In case of acquiring the remaining time until lamp warning message starts to appear (in terms of specified values)
03H 96H 00H 00H 02H 00H 08H A3H
Example of acquisition
DATA03 DATA04 DATA05 DATA06: Remaining time
40H 7EH 05H 00H: 360000 seconds
Calculator Procedure
1) Set calculator to HEX
2) Punch in DATA06 DATA05 DATA04 DATA03 (00057E40)
3) Change from HEX to Decimal - value will change to 360000 seconds
Remaining time until lamp warning message starts to appear
= 360000/ 3600= 100 hours
(!) Lamp Hour Meter
This is the timer for normal lamp mode conversion.
(!!) Lamp usage time
This is the lamp total usage. It is displayed in the projector's menu.
(!!!) NP4000/4001, NP4100/4100W : This function is not supported.
037-7. LAMP INFORMATION REQUEST 4
**********************************************************************
Function:
This command acquires the information on the projector lamp.
Command:
03H 9BH 00H 00H 03H DATA01 DATA02 DATA03 CKS
(*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 Target
00H : Lamp1
01H : Lamp2
DATA02 Unit(!4)
00H : Second
01H : Reserved
02H : Hour
DATA03 Item
00H : Lamp Hour Meter (second)(!2)
01H : Lamp usage time (second)(!3)
04H : lamp remaining amount until lamp warning message
( 100% to -X%(!1) )
05H : Lamp usage time (Normal mode)(second) (!5)
06H : Lamp usage time (Eco mode)(second) (!5)
08H : Remaining time until lamp warning message starts
to appear (in terms of specified values)
09H : Remaining time until lamp warning message starts
to appear (in terms of Normal mode values)
0AH : Remaining time until lamp warning message starts
to appear (in terms of Eco mode values)
10H : Remaining time until inhibition of lamp usage
(in terms of specified values)
11H : Remaining time until inhibition of lamp usage
(in terms of Normal mode values)
12H : Remaining time until inhibition of lamp usage
(in terms of Eco mode values)
Response: At the time of a success
23H 9BH 01H xxH 07H DATA01 to DATA07 CKS
(*1) (*2) (*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 same values as DATA01 of the command
DATA02 same values as DATA02 of the command
DATA03 same values as DATA03 of the command
DATA04 to 07 Acquired information
Response: At the time of a failure
A3H 9BH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
* In case of acquiring lamp's use of hours
03H 9BH 00H 00H 03H 00H 00H 01H CKS
Example of acquisition
DATA04 DATA05 DATA06 DATA07 : lamp's use of hours
50H 46H 00H 00H : 18000 seconds
Lamp Usage = 18000 / 3600 = 5 hour
(!1) X = 100 - ((Lamp Use Prohibited Time * 100) / Lamp Use Warning Starting Time)
Example) The case of Lamp Use Prohibited Time 2100[H] A
Lamp Use Warning Starting Time 2000[H] Model.
X = 100 - ((2100 * 100) / 2000) = -5[%]
(!2) Lamp Hour Meter
This is the timer for normal lamp mode conversion.
(!3) Lamp usage time
This is the lamp total usage. It is displayed in the projector's menu.
(!4) This setting is ignored, if the Item's unit is not time.
(!5) NP4000/4001, NP4100/4100W : This function is not supported.
038. LAMP MODE REQUEST
**********************************************************************
Function:
This command acquires the setting of the lamp mode of projector.
Command:
03H B0H 00H 00H 01H 07H BBH
Response: At the time of a success
23H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 07H fixed
DATA02 Setting Value
00H : Normal
01H : Eco
Response: At the time of a failure
A3H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
039. LAMP MODE SET
**********************************************************************
Function:
This command sets the lamp mode of projector.
Command:
03H B1H 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 07H fixed
DATA02 Setting Value
00H : Normal
01H : Eco
Response: At the time of a success
23H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 07H fixed
DATA02 Results
00H : Normal
01H : Error
Response: At the time of a failure
A3H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
046. WXGA MODE SETTING REQUEST
**********************************************************************
Function:
This command acquires the setting of the WXGA Mode of projector.
Command:
03H B0H 00H 00H 01H C3H 77H
Response: At the time of a success
23H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 C3H fixed
DATA02 Setting Value
00H : OFF
01H : ON
Response: At the time of a failure
A3H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
049. WXGA MODE SETTING SET
**********************************************************************
Function:
This command sets the WXGA Mode of projector.
Command:
03H B1H 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 C3H fixed
DATA02 Setting Value
00H : OFF
01H : ON
Response: At the time of a success
23H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 C3H fixed
DATA02 Results
00H : Normal
01H : Error
Response: At the time of a failure
A3H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
======================================================================
6. Response
----------------------------------------------------------------------
* At the time of a success( ACK )
This returns ACK without adding data portion to the command that does not request data.
This returns ACK with adding data to the data portion for the command that requests data.
* At the time of a failure( NAK )
This adds a cause of not accepting the command to data portion to return it.
(Example) Power On
Command:
02H 00H 00H 00H 00H CKS
Response:
A2H 00H 01H 40H 02H DATA01 DATA02 CKS
======================================================================
7. Table of Response Error Codes
----------------------------------------------------------------------
DATA01
Error Types
00H
00H
01H
01H
02H
02H
DATA2
Error description
00H
01H
Error contents
Unknown command.
This current model does not support this function.
00H
01H
03H
0DH
Invalid values specified.
Specified terminal is unavailable or cannot be selected.
Setting not possible.
Power Off inhibited.
050. REMOTE KEY CODE
**********************************************************************
Function:
This command sends remote control key codes of projector.
Command:
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 : Remote control key code (Word type)
Key number DATA01 DATA02 Key name
--------------------------------------------
1 01H 00H POWER
2 02H 00H POWER ON (!!)
3 03H 00H POWER OFF (!!)
4 04H 00H SOURCE (AUTO) (!!)
5 05H 00H AUTO (!) (!!)
6 06H 00H MENU (!!) (!!!)
7 07H 00H UP (!!) (!!!)
8 08H 00H DOWN (!!) (!!!)
9 09H 00H RIGHT (!!) (!!!)
10 0AH 00H LEFT (!!) (!!!)
11 0BH 00H ENTER (!!) (!!!)
12 0CH 00H CANCEL (!!) (!!!)
13 0DH 00H HELP (!!) (!!!)
14 0EH 00H POINTER
15 0FH 00H MAGNIFY UP
16 10H 00H MAGNIFY DOWN
17 11H 00H PICTURE MUTE
18 12H 00H SOUND MUTE
19 13H 00H MUTE (!!)
20 14H 00H FOCUS UP
21 15H 00H FOCUS DOWN
22 16H 00H ZOOM UP
23 17H 00H ZOOM DOWN
30 1EH 00H STORE
31 1FH 00H MUTE ALL OFF
37 25H 00H R
38 26H 00H G
39 27H 00H B
40 28H 00H OSD MUTE
41 29H 00H PICTURE
42 2AH 00H WHITE BAL
43 2BH 00H IMAGE
44 2CH 00H TEST
45 2DH 00H UNDO
46 2EH 00H 1
47 2FH 00H 2
48 30H 00H 3
49 31H 00H 4
50 32H 00H 5
51 33H 00H 6
52 34H 00H 7
53 35H 00H 8
54 36H 00H 9
55 37H 00H 0
56 38H 00H POSITION
57 39H 00H INFO.
58 3AH 00H PIXEL
59 3BH 00H KEYSTONE
60 3CH 00H AMPLITUDE
61 3DH 00H INPUT LIST
71 47H 00H PICMUTE ON (!!)
72 48H 00H PICMUTE OFF (!!)
73 49H 00H SNDMUTE ON (!!)
74 4AH 00H SNDMUTE OFF (!!)
75 4BH 00H RGB1(*5) (!!)
76 4CH 00H RGB2(*5)
77 4DH 00H RGB3
78 4EH 00H YCBCR
79 4FH 00H VIDEO1 (!!)
80 50H 00H VIDEO2
81 51H 00H S-VIDEO1 (!!)
82 52H 00H S-VIDEO2
83 53H 00H DIGITAL1
84 54H 00H DIGITAL2
85 55H 00H PC CARD
96 60H 00H BS
132 84H 00H VOLUME UP (!!)
133 85H 00H VOLUME DOWN (!!)
134 86H 00H KEYSTONE UP (!!)
135 87H 00H KEYSTONE DOWN (!!)
136 88H 00H SLIDE UP
137 89H 00H SLIDE DOWN
138 8AH 00H FREEZE (!!)
158 9EH 00H FILE
159 9FH 00H PAGE
163 A3H 00H ASPECT (!!)
164 A4H 00H VIDEO3
165 A5H 00H VIDEO4
166 A6H 00H S-VIDEO3
167 A7H 00H S-VIDEO4
200 C8H 00H ZOOM
201 C9H 00H FOCUS
214 D6H 00H 3D REFORM
215 D7H 00H SOURCE (!!)
216 D8H 00H RGB(*5) oggle (!!)
217 D9H 00H VIDEO Toggle (!!)
218 DAH 00H 3D REFORM RESET
221 DDH 00H AUTO (SHORT)
222 DEH 00H AUTO (LONG)
223 DFH 00H PICTURE MANAGEMENT (!!)
225 E1H 00H COMPONENT (!!)
226 E2H 00H ZOOM POS UP (HT)
227 E3H 00H ZOOM POS DOWN (HT)
228 E4H 00H DVI/DVI (DIGITAL) (*6) (!!)
229 E5H 00H LAN
232 E8H 00H D ZOOM UP (WT)
233 E9H 00H D ZOOM DOWN (WT)
237 EDH 00H PSCODE(Passcode screen will be displayed at once)
238 EEH 00H LAMP MODE (!!!)
Response: At the time of a success
22H 0FH 01H xxH 01H DATA01 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
FFH : Error
Response: At the time of a failure
A2H 0FH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
(!) About AUTO key
The MT series model with the built-in image sensor does not support the AUTO key. Use the AUTO (SHORT) key.
(!!) HT10 series, LT180, LT30 series, NP40 series and NP4000 series
(!!!) VT60 series, VT70 series, VT80 series, and VT90 series
Command example:
* Sending the AUTO key code
02H 0FH 00H 00H 02H 05H 00H 18H
* Sending the AUTO (SHORT) key code
02H 0FH 00H 00H 02H DDH 00H F0H
------------------------------------------
* cycle/toggle volume mute
* cycle/toggle picture mute
* cycle/toggle picture freeze
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
Data Portion Contents
--------------------------------------------------------------------
DATA01/DATA02 12H/00H : Volume mute
DATA01/DATA02 11H/00H : Picture mute
DATA01/DATA02 8AH/00H : Picture freeze
------------------------------------------
* cycle aspect ratio
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
Data Portion Contents
--------------------------------------------------------------------
DATA01/DATA02 A3H/00H : Aspect Ratio
------------------------------------------
* all menu functionality (digits 0-9, cursor movement, enter, select, return, back, clear, etc)
02H 0FH 00H 00H 02H DATA01 DATA02 CKS
051. CARBON SAVINGS INFORMATION REQUEST
**********************************************************************
Function:
This command acquires the Carbon Saving values on the projector.
Command:
03H 9AH 00H 00H 01H DATA01 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Acquirement items
00H : Total Carbon Savings
01H : Carbon Savings during operation
Response: At the time of a success
23H 9AH 01H xxH 09H DATA01 to DATA09 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Same as DATA01 of the transmit data
DATA02 to 05 Carbon Savings (Kilogram Maximum: 99999[kg])
DATA06 to 09 Carbon Savings (Milligram Maximum:999999[mg])
Response: At the time of a failure
A3H 9AH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
Example for Total Carbon Savings
DATA02 DATA03 DATA04 DATA05 : Kilogram
9CH 09H 00H 00H : 2460 [kg]
DATA06 DATA07 DATA08 DATA09 : Milligram
06H F9H 00H 00H : 63750 [mg]
Total Carbon Savings
= (2460 * 1000) + (63750 / 1000) = 2460063.75 [g]
= 2460 + (63750 / 1000 / 1000) = 2460.06375 [kg]
060. GAIN PARAMETER REQUEST 2
**********************************************************************
Function:
This command acquires the adjustment values.
Command:
03H 04H 00H 00H 03H DATA01 .. DATA03 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Acquirement items (!)
DATA03 00H fixed
Response: At the time of a success
23H 04H 01H xxH 0DH DATA01 .. DATA13 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Adjustment status
00H : Displaying impossible
01H : Adjustment impossible
02H : Adjustment possible
FFH : Selected gain is not available.
DATA02 Maximum adjustment value (Lower ranking 8 bits)
DATA03 Maximum adjustment value (Upper ranking 8 bits)
DATA04 Minimum adjustment value (Lower ranking 8 bits)
DATA05 Minimum adjustment value (Upper ranking 8 bits)
DATA06 Default adjustment value (Lower ranking 8 bits)
DATA07 Default adjustment value (Upper ranking 8 bits)
DATA08 Current value (Lower ranking 8 bits)
DATA09 Current value (Upper ranking 8 bits)
DATA10 .. 13 Reserved
Response: At the time of a failure
A3H 04H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
(!
) Acquirement items
28H
29H
29H
29H
29H
2AH
2BH
2BH
2CH
2CH
15H
15H
16H
18H
18H
19H
1AH
1BH
1CH
1DH
21H
21H
00H
01H
22H 00H
23H 00H
24H
25H
25H
25H
00H
00H
01H
02H
26H
27H
28H
28H
28H
00H
00H
00H
01H
02H
00H
01H
00H
00H
01H
00H
00H
00H
00H
00H
03H
00H
01H
02H
03H
00H
00H
01H
00H
01H
0DH
0DH
0EH
0EH
0FH
0FH
10H
10H
13H
14H
14H
14H
14H
14H
14H
05H
06H
06H
06H
06H
06H
07H
08H
08H
09H
00H
01H
02H
03H
04H
05H
05H
09H
0AH
0BH
0CH
0CH
00H
01H
00H
01H
00H
01H
00H
01H
00H
00H
01H
02H
03H
04H
05H
02H
00H
01H
02H
03H
04H
00H
00H
01H
00H
01H
00H
00H
00H
01H
00H
00H
00H
00H
00H
00H
01H
Picture / Brightness
Picture / Contrast
Picture / Color
Picture / Hue
Picture / Sharpness
Volume
Sound / Bass
Sound / Treble
Blanking / Top
Blanking / Bottom
Blanking / Left
Blanking / Right
Blanking / On/Off
Image / Auto Adjust
Image / Position H
Image / Position V
Image / Pixel Adjust Clock
Image / Pixel Adjust Phase
Image / Video Filter
Image / Resolution
Image / Amplitude H
Image / Amplitude V
Image / Input Signal Size H
Image / Input Signal Size V
Image / Output Signal Size H
Image / Output Signal Size V
Image / Output Position H
Image / Output Position V
Image / Sync Protection Upper
Image / Sync Protection Lower
Color Temperature
White Balance / Brightness R
White Balance / Brightness G
White Balance / Brightness B
White Balance / Contrast R
White Balance / Contrast G
White Balance / Contrast B
Keystone H
Keystone V
Video Mode Gamma
Aspect Ratio / Input Signal
Aspect Ratio / Display Area
Motion Level
Noise Reduction / Luminance
Noise Reduction / Chrominance
Select Color Matrix
V-Aperture / Vertical Detail
W/B Compress White
W/B Compress Black / Black Expansion
Telecine
Y/C Delay
Dithering
VD Delay / Adjustment
VD Delay / Field Invert
VD Delay / Offset
Motion Select
Select Color Matrix Type
YTR Adjustment / Gain
YTR Adjustment / Tap
YTR Adjustment / Gain2
YTR Adjustment / Tap2
CTR Adjustment / Gain
CTR Adjustment / Tap
CTR Adjustment / Gain2
CTR Adjustment / Tap2
Sharpness Tap
White Correct / Position
White Correct / Gain
Black Correct / Position
Black Correct / Gain
Black Correct / Inv Gain
Lamp Output
Signal Level / Auto Control
Signal Level / R/G/B Gain R
Signal Level / R/G/B Gain G
Signal Level / R/G/B Gain B
Signal Level / Y/Cb/Cr Gain Y
Signal Level / Y/Cb/Cr Gain Cb
Signal Level / Y/Cb/Cr Gain Cr
Signal Level / Y/Pb/Pr Gain Y
Signal Level / Y/Pb/Pr Gain Pb
Signal Level / Y/Pb/Pr Gain Pr
Clamp Timing
Clamp Timing / Adjust
Convergence / Red H
Convergence / Red V
Convergence / Green H
Convergence / Green V
Convergence / Blue H
Convergence / Blue V
Switcher Gain / R
Switcher Gain / G
Switcher Gain / B
Switcher Gain / Volume
Panel Size / H
Panel Size / V
Panel Position / H
Panel Position / V
Signal Level / White Gain
Ref. White Bal. / Brightness R
Ref. White Bal. / Brightness G
Ref. White Bal. / Brightness B
Ref. White Bal. / Contrast R
Ref. White Bal. / Contrast G
Ref. White Bal. / Contrast B
Overscan
Edge
Synchronize / Off/On
Synchronize / Adjust
Input Signal Position / H
Input Signal Position / V
Signal Type
Color Correct / On/Off
Color Correct / G-R Gain
Color Correct / G-B Gain
Color Correct / B-R Gain
Color Correct / B-G Gain
Color Correct / R-G Gain
Color Correct / R-B Gain
Color Correct / U Gain
Color Correct / V Gain
HD Delay
Ref. Pedestal Level / U Level
Ref. Pedestal Level / V Level
Stack Clock
Sub Brightness / R
Sub Brightness / G
Sub Brightness / B
Y Contrast
Y Gamma Correction
Setup Level
Setup Level / Adjust
Setup Level / Correction
DCL
Color Space
RGB Sharpness
Color Correction / Mode
Color Correction / Color Tune
Color Correction / Yellow
Color Correction / Magenta
Color Correction / Cyan
Color Correction / White
Color Correction / Color Tune
45H
46H
47H
47H
47H
48H
42H
42H
43H
44H
44H
44H
49H
4AH
00H
00H
4BH 00H
4CH
4CH
4CH
4CH
4CH
4CH
4CH
00H
01H
02H
03H
04H
05H
06H
00H
00H
00H
01H
02H
00H
00H
01H
00H
00H
01H
02H
40H
40H
40H
40H
40H
41H
3EH
3FH
40H
40H
40H
40H
3AH
3BH
3CH
3DH
3DH
3EH
38H
38H
39H
3AH
3AH
3AH
3AH
3AH
04H
05H
06H
07H
08H
00H
01H
00H
00H
01H
02H
03H
05H
00H
00H
00H
01H
00H
00H
01H
00H
00H
01H
02H
03H
04H
34H
34H
34H
35H
35H
35H
36H
37H
37H
31H
33H
33H
34H
34H
34H
2CH
2DH
2EH
2FH
2FH
2FH
30H
30H
30H
31H
31H
03H
04H
05H
00H
01H
02H
00H
00H
01H
02H
00H
01H
00H
01H
02H
02H
00H
01H
02H
00H
01H
02H
00H
00H
00H
01H
Color Correction / Yellow
Color Correction / Magenta
Color Correction / Cyan
Color Correction / White
Through
Ref. Auto White / Color Temp R
Ref. Auto White / Color Temp G
Ref. Auto White / Color Temp B
Position
Screen Position
Sweet Vision
Sweet Vision / Split
Sub Color / R
Sub Color / G
Sub Color / B
Picture Management
Color Correction 2 Red
Color Correction 2 Green
Color Correction 2 Blue
Color Correction 2 Yellow
Color Correction 2 Magenta
Color Correction 2 Cyan
Color Correction 2 Color Gain
Color Temperature(Enable)
White Peaking
3D Y/C Separation
Deinterlace
Base Setting
Cornerstone T-Left H
Cornerstone T-Left V
Cornerstone T-Right H
Cornerstone T-Right V
Cornerstone B-Right H
Cornerstone B-Right V
Cornerstone B-Left H
Cornerstone B-Left V
Cornerstone Execute
Contrast Enhancement
Variable Y/C Delay
Tint Correction
Y Gamma
Ref. Color Cor. / Red
Ref. Color Cor. / Green
Ref. Color Cor. / Blue
Ref. Color Cor. / Yellow
Ref. Color Cor. / Magenta
Ref. Color Cor. / Cyan
Ref. Color Cor. / Color Gain
Saturation
Pincushion / Horizontal
Pincushion / Vertical
Pincushion / Balance
Digital Zoom / Zoom
Digital Zoom / Horizontal Position
Digital Zoom / Vertical Position
White Bal. Dual / Brightness R
White Bal. Dual / Brightness G
White Bal. Dual / Brightness B
White Bal. Dual / Contrast R
White Bal. Dual / Contrast G
White Bal. Dual / Contrast B
White Bal. Lamp1 / Brightness R
White Bal. Lamp1 / Brightness G
White Bal. Lamp1 / Brightness B
White Bal. Lamp1 / Contrast R
White Bal. Lamp1 / Contrast G
White Bal. Lamp1 / Contrast B
White Bal. Lamp2 / Brightness R
White Bal. Lamp2 / Brightness G
White Bal. Lamp2 / Brightness B
White Bal. Lamp2 / Contrast R
White Bal. Lamp2 / Contrast G
White Bal. Lamp2 / Contrast B
Color Cor. Dual / Red
01H
02H
03H
04H
05H
00H
01H
02H
05H
06H
00H
00H
01H
02H
00H
01H
02H
00H
03H
04H
05H
00H
01H
02H
03H
04H
05H
00H
00H
00H
00H
00H
01H
02H
03H
04H
03H
04H
05H
06H
07H
08H
00H
00H
00H
00H
00H
00H
00H
01H
02H
00H
00H
01H
02H
03H
04H
05H
06H
02H
00H
00H
00H
01H
00H
01H
02H
07H
08H
09H
0AH
00H
00H
01H
63H
63H
63H
63H
63H
64H
64H
64H
5FH
5FH
60H
61H
61H
61H
62H
62H
62H
63H
64H
64H
64H
65H
65H
65H
65H
65H
65H
66H
5CH
5DH
5EH
5FH
5FH
5FH
5FH
5FH
5AH
5AH
5AH
5AH
5AH
5AH
5BH
55H
56H
57H
58H
59H
5AH
5AH
5AH
53H
54H
54H
54H
54H
54H
54H
54H
4EH
4FH
50H
51H
51H
52H
52H
52H
4CH
4CH
4CH
4CH
4DH
4EH
4EH
67H
67H
68H
68H
68H
68H
68H
68H
68H
90H
66H
66H
66H
66H
66H
66H
67H
67H
67H
67H
67H
91H 00H
92H 00H
94H 00H
95H
96H
97H
00H
00H
00H
01H
02H
03H
04H
05H
06H
00H
01H
02H
03H
04H
05H
06H
00H
01H
02H
03H
04H
05H
06H
00H
Color Cor. Dual / Green
Color Cor. Dual / Blue
Color Cor. Dual / Yellow
Color Cor. Dual / Magenta
Color Cor. Dual / Cyan
Color Cor. Dual / Color Gain
Color Cor. Lamp1 / Red
Color Cor. Lamp1 / Green
Color Cor. Lamp1 / Blue
Color Cor. Lamp1 / Yellow
Color Cor. Lamp1 / Magenta
Color Cor. Lamp1 / Cyan
Color Cor. Lamp1 / Color Gain
Color Cor. Lamp2 / Red
Color Cor. Lamp2 / Green
Color Cor. Lamp2 / Blue
Color Cor. Lamp2 / Yellow
Color Cor. Lamp2 / Magenta
Color Cor. Lamp2 / Cyan
Color Cor. Lamp2 / Color Gain
Picture Preset
SweetVision Mode
SweetVision Level
Enhancer
I/P Converter
Lamp Mode Adjust
Wall Color
Command example:
* In case of acquiring Picture Brightness
03H 04H 00H 00H 03H 00H 00H 00H 0AH
077. MUTE CONTROL
**********************************************************************
Function:
This command controls the mute of picture, sound and on-screen.
Command:
02H 1AH 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Setting items
00H : Picture
01H : Sound
02H : On-Screen
DATA02 Setting Value
00H : OFF
01H : ON
Response: At the time of a success
22H 1AH 01H xxH 01H DATA01 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
01H : Error
Response: At the time of a failure
A2H 1AH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
* Sound mute is cancelled in the following cases:
Input connector switching
Video signal switching
Volume adjustment
078-1. SETTING REQUEST
**********************************************************************
Function:
This command acquires the function information of projector.
Command:
00H 85H 00H 00H 01H 00H 86H
Response: At the time of a success
20H 85H 01H xxH 20H DATA01 .. DATA32 CKS
(*3) (*1) (*2)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 03 Projector type
DATA01 DATA02 DATA03
11H
11H
11H
11H
11H
11H
11H
10H
10H
10H
10H
10H
10H
10H
10H
11H
11H
12H
12H
12H
12H
12H
12H
12H
01H
01H
01H
00H
01H
02H
01H 00H
02H 00H
02H
02H
01H
02H
02H 00H
02H 00H
02H 01H
03H
03H
00H
00H
04H 00H
04H 01H
10H
10H
10H
10H
10H
10H
10H
04H 00H
04H 01H
05H 00H
06H 00H
06H 00H
08H
08H
08H
10H
00H
00H
01H
00H
00H
01H
02H
03H
04H
00H
01H
00H
01H
00H
02H
02H
03H
04H
02H
03H
05H
07H
08H
09H
01H
02H
00H
03H
00H
01H
00H
01H
02H
00H
01H
03H MT1060/MT1065
03H MT860
03H MT1075
06H NP1000/NP2000
03H LT240/LT260
03H LT220
03H LT240K/LT260K
05H LT245/LT265
06H LT380
06H LT280
06H VT80 Series
07H VT90 Series
01H GT1150
01H GT2150
03H GT5000
03H GT6000
03H HT1000
03H WT600
05H WT610/WT615
07H NP4000/NP4001
10H NP4100
10H NP4100W
08H VT700
09H NP600
09H NP500
09H NP500 W
09H NP400
09H NP300
10H NP610
10H NP510
10H NP510W
10H NP410
10H NP310
10H NP610S
10H NP510WS
10H NP410
11H NP2200
11H NP1200
00H NP41/61
00H NP62
11H NP215
11H NP1150/NP2150/NP3150
11H NP115
11H NP110
11H NP216
12H NP64
12H NP43
08H NP1150/NP2150/NP3150
08H NP3151W
09H NP905
09H NP901W
09H VT800
10H NP1250/NP2250/NP3250
10H NP3250W
DATA04 Sound function
00H : Not available
01H : Available
DATA05 Calendar function
00H : No function
01H or 03H : Timer function, sleep timer function
02H : Sleep timer function
DATA06 .. 32 Reserved
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
078-2. RUNNING STATUS REQUEST
**********************************************************************
Function:
This command acquires the status of the projector operation.
Command:
00H 85H 00H 00H 01H 01H 87H
Response: At the time of a success
20H 85H 01H xxH 10H DATA01 .. DATA16 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 02 Reserved
DATA03 Projector status
00H : Idling
01H : Power On
DATA04 Cooling processing
00H : No execution(Normal condition)
01H : During execution
DATA05 Power On/Off processing
00H : No execution(Normal condition)
01H : During execution
DATA06 Status of operation
00H : Idling
04H : Power On
05H : Cooling
06H : Idling(Error occurrence)
Other than above : (nondisclosure)
Internal use of code during a state transition period
DATA07 PC Card insertion
00H : Not inserted
01H : Inserted
DATA08 USB Mouse connection
00H : Not connected
01H : Connected
DATA09 .. 16 Reserved
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
078-3. INPUT STATUS REQUEST
**********************************************************************
Function:
This command acquires the status of input signal of the projector.
Command:
00H 85H 00H 00H 01H 02H 88H
Response: At the time of a success
20H 85H 01H xxH 10H DATA01 .. DATA16 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Selecting signal processing
00H : No execution(Normal condition)
01H : During execution
DATA02 Signal number( Entry list number - 1 )
0 .. 199
DATA03 .. 04 Selected input terminal
Terminal name DATA03 DATA04
RGB1(RGB)(*5) 01H
RGB2(*5) 02H
DVI(Analog) 02H
Video 01H
S-Video 01H
Component 02H
Component 03H
DVI(*6) 01H
DVI(DIGITAL)(*6) 01H
HDMI 01H
Viewer
LAN
Slot1-1
Slot1-2
01H
02H
01H
02H
Slot2-1
Slot2-2
01H
02H
RGB(Video) 02H
RGB(S-Video) 02H
DATA05 Entry list type
01H : Default
02H : User
07H
07H
08H
08H
09H
09H
02H
03H
01H
01H
01H
02H
03H
04H
04H
06H
06H
06H
DATA06 Test pattern display
00H : No display(Normal condition)
01H : Displaying
DATA07 ..08 Reserved
DATA09 Indicate Contents
00H = Picture signal displaying
01H = No signal
02H = Viewer displaying
03H = Test pattern displaying
04H = LAN displaying
DATA10 .. 16 Reserved
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
078-4. MUTE STATUS REQUEST
**********************************************************************
Function:
This command acquires the status of the mute of projector.
Command:
00H 85H 00H 00H 01H 03H 89H
Response: At the time of a success
20H 85H 01H xxH 10H DATA01 .. DATA16 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Picture mute
00H : OFF
01H : ON
DATA02 Sound mute
00H : OFF
01H : ON
DATA03 On-screen mute
00H : OFF
01H : ON
DATA04 Forced on-screen mute
00H : OFF
01H : ON
DATA05 On-screen display
00H : No display
01H : Displaying
DATA06 .. 16 Reserved
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
078-5. MODEL NAME REQUEST
**********************************************************************
Function:
This command acquires the model name of the projector.
Command:
00H 85H 00H 00H 01H 04H 8AH
Response: At the time of a success
20H 85H 01H xxH 20H DATA01 .. DATA32 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 32 Model name (NULL termination character string)
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
======================================================================
6. Table of Response Error Codes
DATA01 DATA02
Error types
Error descriptio
Error contents
00H
00H
00H
01H
Unknown command
The current model does not support this function.
01H 00H Unvalid values specified.
01H 01H Specified terminal is unavailable or cannot be selected.
01H 02H Selected language is not available.
02H 00H Available memory reservation error
02H 02H Operating
02H
02H
02H
02H
02H
02H
03H
03H
03H
02H
02H
02H
03H Setting not possible
04H On Forced on-screen mute mode
06H Displaying a signal other than PC
Viewer
02H 07H -No
02H 08H Displaying a test pattern or PC Card files screen.
09H
01H
02H
No PC card is inserted
0AH Memory operation failed
0CH Displaying the Entry List
0DH Power Off inhibited
0EH Execution error
0FH No operation authority
00H Specified gain number is wrong
Selected gain is not available.
Adjustment failed
[079. FREEZE CONTROL]
**********************************************************************
Function:
This command controls the freeze.
Command:
01H 98H 00H 00H 01H DATA01 CKS
Operation types
DATA01: 00H : Reserved
01H : Freeze start
02H : Freeze cancel
Response: At the time of a success
21H 98H ID *0H 01H DATA01 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
01H : Error
Response: At the time of a failure
A1H 98H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
097-196.WXGA MODE SETTING REQUEST
**********************************************************************
Function:
This command acquires the setting of the WXGA Mode of projector.
Command:
03H B0H 00H 00H 01H C3H 77H
Response: At the time of a success
23H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-----------------------------------------------------------------
DATA01 C3H fixed
DATA02 Setting Value
00H : OFF
01H : ON
Response: At the time of a failure
A3H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
097-198. PIP/SIDE BY SIDE REQUEST
**********************************************************************
Function:
This command acquires the setting of the PIP/SIDE BY SIDE of projector.
Command:
03H B0H 00H 00H 02H DATA01 DATA02 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 C5H fixed
DATA02 Acquisition Object
00H : MODE
01H : POSITION
02H : SOURCE
Response: At the time of a success
23H B0H 01H xxH 03H DATA01 DATA02 DATA03 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 C5H fixed
DATA02 Acquisition item(Same as DATA02 of the transmit data)
DATA03 Setting Value
if DATA02 is MODE(00H)
00H : PIP
01H : SIDE BY SIDE
if DATA02 is POSITION(01H)
00H : TOP-LEFT
01H : TOP-RIGHT
02H : BOTTOM-LEFT
03H : BOTTOM-RIGHT
if DATA02 is SOURCE(02H)
00H : OFF
01H : VIDEO
02H : S-VIDEO
Response: At the time of a failure
A3H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
098-198. PIP/SIDE BY SIDE SET
**********************************************************************
Function:
This command sets the PIP/SIDE BY SIDE of projector.
Command:
03H B1H 00H 00H 03H DATA01 DATA02 DATA03 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 C5H fixed
DATA02 Update target
00H : MODE
01H : POSITION
02H : SOURCE
DATA03 Setting Value
if DATA02 is MODE(00H)
00H : PIP
01H : SIDE BY SIDE
if DATA02 is POSITION(01H)
00H : TOP-LEFT
01H : TOP-RIGHT
02H : BOTTOM-LEFT
03H : BOTTOM-RIGHT
if DATA02 is SOURCE(02H)
00H : OFF
01H : VIDEO
02H : S-VIDEO
Response: At the time of a success
23H B1H 01H xxH 03H DATA01 DATA02 DATA03 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 00H fixed
DATA02 Update target
( Same as DATA02 of the transmit data )
DATA03 Results
00H : Normal
01H : Error
Response: At the time of a failure
A3H B1H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
110. AUTO FUNCTIONS EXECUTE
**********************************************************************
Function:
This command executes the auto functions.
Command:
03H B6H 00H 00H 01H DATA01 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Execution items
Focus
00H !
01H *
!: According to projector setting
*: Executing
Response: At the time of a success
23H B6H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Execution items (Same as DATA01 of the transmit data)
DATA02 Results
00H : Normal
01H : Error
Response: At the time of a failure
A3H B6H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
111. AUTO ADJUST EXECUTE2
**********************************************************************
Function:
This command executes the Auto Adjust.
Command:
03H BAH 00H 00H 01H 00H BEH
Response: At the time of a success
23H BAH 01H xxH 01H 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A3H BAH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
305-1. BASE MODEL TYPE REQUEST
**********************************************************************
Function:
This command acquires the projector type.
Command:
00H BFH 00H 00H 01H 00H C0H
Response: At the time of a success
20H BFH 01H xxH 10H DATA01 ... DATA16 CKS
(*1) (*2)
Data Portion Contents
(*3)
-------------------------------------------------------------------
DATA01 00H fixed
DATA02 ... 03 Projector type
See DATA13...14
DATA04 ... 12 Model name (NULL termination character string)
DATA13 ... 14 Projector type
DATA02 DATA03 DATA13 DATA14
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
FFH
03H
03H
03H
01H
FFH
FFH
FFH
FFH
00H
00H
00H
00H
00H
02H
02H
00H
00H
00H
00H
02H
02H
02H
00H
01H
01H
00H
00H
00H
00H
00H
00H
00H
00H
10H
10H
11H
11H
11H
11H
11H
11H
10H
10H
10H
10H
10H
10H
10H
10H
10H
11H
11H
12H
12H
12H
12H
12H
12H
12H
08H
08H
08H
10H
10H
10H
10H
10H
04H
04H
04H
05H
05H
05H
05H
06H
06H
02H
02H
02H
02H
02H
03H
03H
03H
01H 00H
01H 02H
01H
01H
02H
00H
02H
02H
02H
02H
00H
01H
02H
00H
00H
01H
00H
00H
00H
00H
00H
00H
00H
00H
01H
00H
00H
01H
02H
03H
00H
01H
02H
00H
00H
00H
00H
00H
00H
01H
02H
00H
01H
00H
02H
03H
04H
04H
00H
01H
02H
03H
05H
07H
08H
09H
00H
03H
00H
01H
00H
01H
02H
00H
01H
03H MT1060/1065
03H MT860
03H MT1075
06H NP1000/NP2000
03H LT240/LT260
03H LT220
03H LT260K
05H LT245/LT265
06H LT380
06H LT280
05H LT180
06H LT25/LT30/LT35
07H NP40/NP50/NP60
04H VT770
06H VT80 Series
07H VT90 Series
03H GT5000
03H GT6000
03H GT6000R
03H HT1000
04H HT1100
05H HT410
05H HT510
03H WT600
05H WT610/WT615
07H NP4000/NP4001
10H NP4100
10H NP4100W
08H VT700
09H NP600
09H NP500
09H NP500W
09H NP400
09H NP300
10H NP610
10H NP510
10H NP510W
10H NP410
10H NP310
10H NP610S
10H NP510WS
10H NP410
11H NP2200
11H NP1200
00H NP41/61
00H NP62
11H NP215
11H NP115
11H NP110
11H NP216
12H NP64
12H NP43
08H NP1150/NP2150/NP3150
08H NP3151W
09H NP905
09H NP901W
09H VT800
10H NP1250/NP2250/NP3250
10H NP3250W
DATA15 ... 16 Reserved
Response: At the time of a failure
A0H BFH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
305-3. PROJECTOR INFORMATION REQUEST
**********************************************************************
Function:
This command acquires basic operation states of projector.
Command:
00H BFH 00H 00H 01H 02H C2H
Response: At the time of a success
20H BFH 01H xxH 10H DATA01 ... DATA16 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 02H fixed
DATA02 Projector Processing Status
00H : Idle
04H : Power On
05H : Cooling
06H : Idle(Error Standby)
Other : Not Support
Other than above : (nondisclosure)
Internal use of code during a state transition period
DATA03 Indicate Contents
00H : Picture signal displaying
01H : No Signal
02H : Viewer displaying
03H : Test Pattern displaying
04H : LAN displaying
05H : Test Pattern (User) displaying
10H : Signal selection in progress
Other : Not Support
DATA04 Select source input type 1
01H : 1
02H : 2
03H : 3
04H : 4
05H : 5
Other : Not Support
DATA05 Select source input type 2
01H : COMPUTER (RGB)
02H : VIDEO
03H : S-VIDEO
04H : COMPONENT
05H : Reserved
06H : DIGITAL
07H : VIEWER
08H : SLOT1
09H : SLOT2
0AH : SLOT3
0BH : SLOT4
0CH : DIGITAL2
0DH : SCART
10H : AUTO
FFH : Not Source Input
Other : Not Support
DATA06 Indication signal type
(Effective only when Select source input type 2 is 02H or 03H)
x0H : NTSC3.58
x1H : NTSC4.43
x2H : PAL
x3H : PAL60
x4H : SECAM
x5H : B/W60
x6H : B/W50
x7H : PALNM
x8H : NTSC3.58 LBX
x9H : NTSC3.58 SQZ
xAH : COMPONENT(60Hz)
xBH : COMPONENT(50Hz)
xCH : Un known
xDH : NTSC
xEH : PAL-M
xFH : PAL-N
FFH : Not Video Input
Other : Not Support
DATA07 Picture Mute
00H : OFF
01H : ON
DATA08 Sound Mute
00H : OFF
01H : ON
DATA09 On-screen mute
00H : OFF
01H : ON
DATA10...DATA16 Reserved
Response: At the time of a failure
A0H BFH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
======================================================================
6.1. Response
----------------------------------------------------------------------
* At the time of a success (ACK)
This returns ACK without adding data portion to the command that does not request data.
This returns ACK with adding data to the data portion for the command that requests data.
* At the time of a failure (NAK)
This adds a cause of not accepting the command to data portion to return it.
(Example) Power On
Command:
02H 00H FFH F0H 00H CKS
NAK:
A2H 00H 01H 20H 02H DATA01 DATA02 CKS
======================================================================
6. Data Portion of Response
----------------------------------------------------------------------
DATA01 DATA02
Error types
Error description
Error contents
00H
00H
00H
01H
01H 00H
01H 01H
02H
02H
02H
02H
03H
03H
03H
01H
02H
02H
02H
02H
02H
02H
0AH
0DH
0EH
0FH
00H
01H
02H
02H
00H
02H
03H
04H
07H
08H
Unknown command
The current model does not support this function.
Unvalid values specified.
Specified terminal is unavailable or cannot be selected.
Selected language is not available.
Available memory reservation error
Operating memory
Setting not possible
On Forced on-screen mute mode
-No signal-
Displaying a test pattern or PC Card
Fills screen.
Memory operation failed
Power Off inhibited
Execution error
No operation authority
Specified gain number is wrong
Selected gain is not available.
Adjustment failed
ダウンロード
ドキュメントの公開リンク
広告