B-Tech BT8222 Installation guide
Below you will find brief information for Mountlogic BT8222. This single-arm mount supports flat screens up to 65" (165cm) and 60kg (132lbs), fitting VESA/non-VESA patterns up to 790mm x 500mm. It offers +15° tilt, 180° wall swivel, 120° interface swivel, and is suitable for concrete/brick/stud walls. The guide includes step-by-step installation, parts list, and safety notes for secure mounting.
Advertisement
Advertisement
Advertisement
Key features
Supports flat screens up to 65" (165cm) / 60kg (132lbs)
Fits VESA & Non-VESA patterns up to 790mm x 500mm
Easy +15° tilt adjustment
Two swivel points: 180° at wall, 120° at interface
Suitable for concrete/brick/stud walls up to 16"
Simple hook-on installation with included hardware
Frequently asked questions
The mount is designed for flat screens up to 65" (165cm) and 60kg (132lbs).
No, drywall alone is not sufficient. It must be securely fixed to a wooden stud, concrete block, or other permanent structure behind the drywall.
Loosen the tilt adjustment hand lever (part 11) to adjust the tilt, then retighten to fix the position.