iON 1023 Quick Start Guide

Quick Start Guide

Model: #1023,1026,1027

FCC ID: NW71023

Thank you for purchasing the iON Air Pro 2 HD sports video camera.

This QSG contains the common functions and features of Air Pro 2 and Air Pro

2 Wi-Fi. For additional features and functions of Air Pro 2 Wi-Fi, please refer to the back part of the manual.

The iON Air Pro 2 can be mounted with the Bike & Helmet Kit or the Board Kit for the ultimate adventure HD recording experience.

Getting to know your camera

Common features:

9 iON Air Pro 2 is a Professional, High Quality Digital Video Recorder that records Full HD videos with the flip of an an easy slide switch

9 It has the latest 14 Mega Pixel Sensor for you to take great digital photographs

9 A 180 degree high quality lens provides a super wide angle field of view

9 Your camera supports a MicroSD card up to 32GB, allowing you to take videos in 1080p with 30 frames per second for approximately 4 Hours.

9 Equipped with the microphone jack for connection with an external microphone.*

9 The Waterproof Housing enables you to operate the camera up to 10 meters under water.

9 iON Air Pro 2 is about 4.51 ounces or 128g.

* When an external microphone (not included) is connected, audio cannot be recorded through the built-in microphone.

1. Package Contents of Air Pro 2

Carefully unpack the package and ensure that you have the following items:

1

2

3

4

5

6

7

8

9

10

11

USB Cable

Universal Power Adapter

Tripod

Secure Strap

CamLOCK Key

Short Ball Joint with

CamLOCK socket on top

Double Faced Adhesive -

Helmet

Helmet Mount with removable ball join nut

CamLOCK

Quick User Guide

Warranty Card

1. Connect the camera to a computer for data transfer or camera setup.

2. Charge your camera.

Attach the correct international wall plug to the adapter block and connect to the camera with the USB cable

For mounting the camera without using the camLOCK system

Secures the camera to the mount to provide additional security.

Tightens and loosens the CamLOCK screw.

1. Short Ball Joint - to be installed into the Helmet Mount

2. CamLOCK socket - for attaching the

CamLOCK and the camera

Adhere to the helmet mount and/or helmet.

Enables you to mount the camera on different types of helmets by tightening and loosening the ball joint nut

Mount or remove the camera quickly from the CamLOCK socket.

Provides quick information for easy camera operation

Please retain for manufacturers warranty period which is limited to 1 year.

12 Pouch For storing your camera or accessories.

13 Mi-media Card

Provides guidance on how to sign up for your free iON cloud storage.

2. Functional Parts of Air Pro 2

2 LED Indicator Shows the camera status

3 Recording Slide Switch Slide to start or stop video recording

5 MicroSD Card Slot MicroSD card storage location.

7 Mini HDMI Jack

To enable you to connect the camera to an HDTV with an HDMI cable (not included)

8 Video Resolution Switch Select video resolution: FHD (Full HD) or HD.

10

1. Connect to your computer for data transfer or

Port camera setup

2. Charge your camera

Reset Button Reset the camera

Socket

Connect the PODZ to the camera to perform additional functions

3. Using Your Camera

3.1 Charging up Your Camera

Charge your camera with either the USB cable or AC/DC adapter. The red LED will light up to indicate the camera is charging and it will turn off once the camera has been fully charged. It takes about 3 hours to fully charge the camera.

3.2 Inserting a Memory Card

Insert a MicroSD card up to 32GB (not included) before using your camera. Ensure that the camera power is turned OFF before inserting the card into the slot.

Notes:

1. There is only one correct direction to insert the MicroSD card into the slot. Do not force the card into the card slot as it may damage both the camera and the

MicroSD card.

2. A new MicroSD card should be formatted before using. For more information, please see section 4.2.

3. We recommend a class 10 SDHC card.

3.3 Setting up Date and Time

Connect your camera to a computer and run the iON software from the MicroSD card folder. You can set the date and time on the camera via the settings page.

Please see section 4.1 to open iON software

3.4 Installing the PODZ

1. Attach the PODZ to the back of the camera and rotate clockwise until the two dots are aligned.

2. Slide the latch on the PODZ to lock it.

WARNING : The latch must be locked in place to ensure the waterproof seal is activated – failure to do so may cause water leakage.

3.5 Recording Videos

Before starting to record, select the video resolution using the Video Resolution

Switch.

There are two methods for starting the video recording function. When the camera starts recording, there will be a short vibration indicating recording has started. The

LED indicator illuminates RED throughout recording.

1. Whether the camera power is ON or OFF, simply slide the Recording Slide

Switch from STOP to REC to start recording.

2. When your camera is OFF and the Recording Slide Switch is at REC location, press and hold the Power button to turn the camera ON and it will start recording.

To stop Recording, move the Recording Slide Switch from REC to

STOP .The camera will vibrate and the LED indicator will illuminate GREEN to indicate the recording has stopped. The camera will then enter the Standby mode.

An additional option is to hold the Power button to stop the recording and turn the camera off. The camera will vibrate for two seconds and the Red LED light will turn off.

Notes:

1. An additional 432x240 (w/ 1080p/720p) or 320x240 (w/ 960p) video file will be created simultaneously with the recording of an HD/FHD video file. The smaller video file size allows for more efficient uploading of content to social media platforms and email.

2. Changing video resolution is disabled during video recording.

3. There will be around 1-2 seconds delay before the camera starts recording.

4. The various video resolution options for HD and FHD can be changed under the “Settings” selection in the iON software. (see 4.1)

3.6 Taking Photos

1. Turn on the camera by pressing the Power button.

2. After the camera power has been turned on, press the Power button very briefly to take a photo. A short vibration and a flash of the green LED indicates that the action was successful.

Notes:

1. The Still Photo function is disabled during video recording.

2. Change photo resolutions and shooting mode (Single Shot, Burst Mode and

Time Lapse) through the “Settings” section on the iON software.

4. Mounting Your Camera

4.1 Secure Strap

1. Loop one end of the secure strap through the strap hole of the camera. You may use a pin to help thread it through the hole.

2. Attach the other half to the mount.

3. Clip both ends together when camera is mounted.

4.2 CamLOCK

iON’s versatile CamLOCK Mount System allows you to attach the camera to any type of helmet (bike, motorcycle, ski, skydive etc.), pole, board (surf, skate, ski etc) and handlebar (bike and motorcycle).

Please refer to the specific mounting guides for instructions on how to install your mounts with your camera for particular activities.

1. Fit the screw of the CamLOCK to the tripod socket of the camera.

2. Screw the CamLOCK until it is tight on the camera.

4.3 Mounting on Your Helmet

Before mounting, make sure the surface of the helmet on which the double faced adhesive will be adhered is clean so that the helmet mount can be affixed strongly on the helmet.

1. Loosen the ball joint nut from the helmet mount.

2. Install the ball joint to the helmet mount and tighten the nut.

3. Adhere one side of the double faced adhesive to the base of the helmet mount, then peel and stick the other side to the helmet to permanently secure the mount to the helmet.

4. Attach the CamLOCK and camera into the

CamLOCK socket. Ensure that the ball joint nut is tightened securely.

Notes :

1. The CamLOCK system allows you to change the angle of the camera. Simply loosen the nut, adjust the camera angle and retighten the nut.

2. You can use the same helmet mount to mount the camera on a motorcycle helmet by purchasing the other optional mounting kit.

5. iON Software Application

The iON Software Application for Windows or Mac lets you connect to a computer by

USB to:

1. View and copy the files stored on the camera

2. Change the camera settings

3. Set the Date & Time

4. Format the camera's card

5. Link to the iON website and cloud service

6. Check the firmware update

5.1 Windows Software Application

The Windows iON.exe Software Application comes installed on the camera. To run the application:

1. Insert a MicroSD card with at least 2MB free space into the camera.

2. Press the Power button to turn the camera on.

3. Connect your camera to the PC via the camera’s USB cable.

4. Open the MicroSD folder and you will find the file “iON.exe”.

5. Double click the file to open

5.2 Mac Software Application

1. Visit the ion website (www.iontheaction.com) to download the latest Mac software application version.

2. Insert a MicroSD card with at least 2MB free space into the camera.

3. Press the Power button to turn the camera on.

4. Connect your camera to the Mac via the camera’s USB cable.

4. Use Finder to locate and open the camera as a new device usually called “No

Name”. You should see a folder “DCIM” and the file iON.exe when you open it.

6. Drag the downloaded file to the new device and put it with DCIM and iON.exe.

7. Double click the newly loaded file to run the Mac Application. The application will not run if it is not in on the camera’s card.

Notes:

The camera can be connected to any plug & play Windows or Mac system and accessed as a removable disk drive. Files can be viewed and copied without the use of the application.

6. Signing Up for Free iON Cloud Storage

You can sign up for your 8GB of free Cloud storage simply go to www.iontheaction.com/ioncloud and follow the steps. The iON Cloud is a great way to store and share your photos and video footage for free.

7. Connecting Your Camera to a HDTV

You can connect your camera to a HDTV with an HDMI cable (not included). Once it is connected you can:

1. Take photos or videos by using your HDTV as a viewfinder

2. Playback any photo or video files saved in your camera

3. Delete any files saved on the camera

4. Format the MicroSD Card

8. Air Pro 2 Wi-Fi (this section applies to Air Pro 2

WiFi model or optional WiFi PODZ accessory

ONLY)

A Wi-Fi PODZ turns your iON Air Pro 2 into a Wi-Fi access point. View the camera’s videos/photos and change camera settings from your mobile phone, tablet or computer. Transfer files back to your computer or mobile device. You can also live-stream the camera view, start/stop recording or take a photo.

8.1 Air Pro 2 WiFi Package Content

In addition to the package contents of Air Pro 2 (Refer to section 1), the Air Pro 2

Wi-Fi has included a Wi-Fi PODZ for performing the Wi-Fi functionality.

Wi-Fi PODZ Rotate to seal the camera.

8.2 Wi-Fi PODZ Functional Parts

In addition to the functional parts of Air Pro 2(Refer to items 1 to11 in section 2), Air

Pro 2 Wi-Fi has additional functional parts on the Wi-Fi PODZ.

13 Wi-Fi LED indicator Shows the Wi-Fi status

14 Wi-Fi Power button Turns the Wi-Fi on or off

15

PODZ

PODZ Latch

Rotate to seal the camera

Locks the PODZ

WARNING : The latch must be locked in place to ensure the waterproof seal is activated – failure to do so may cause water leakage.

8.3. Using the Wi-Fi PODZ

8.3.1 Installing and turning on the Wi-Fi PODZ

1. Remove your standard PODZ from the back of the camera and place your Wi-Fi PODZ into the camera

PODZ socket. (follow steps 1 and 2 under section

3.4)

2. Press and hold the Power button to turn on your camera.

3. Press the Wi-Fi power button on the Wi-Fi PODZ to turn on your Wi-Fi. The blue LED lights up to indicate the Wi-Fi is warming up. It will take around 15-20 seconds for the Wi-Fi to warm up and become connectable. The LED will flash when the Wi-Fi function is active or connected.

4. Press the Wi-Fi power button to turn off the Wi-Fi anytime.

Note: Wi-Fi will drain your camera battery more rapidly when activated. Turn the

Wi-Fi off if you are not using it to change settings or upload content.

8.3.2 Connecting the Camera to Your Computer

1. Turn on your camera and Wi-Fi PODZ.

2. Go to the network settings of your PC and choose Wi-Fi settings. Search the network, find and click “WIFIPODZ”.

3. Enter password “123456789” and to connect to your camera.

4. Open your Internet browser and input “192.168.1.2”. You will then be able to view the files stored in your camera.

8.3.3 Connecting the Camera to Your Smart Device (Browser)

1. Turn on your camera and Wi-Fi PODZ.

2. Go to the network setting of your mobile device and choose Wi-Fi settings.

Search the network, find and click “WIFIPODZ”.

3. Enter password “123456789” to connect to your camera.

4. Open your Internet browser and input “192.168.1.2” or “wifi.podz”. You can now view the photos and videos stored in your camera.

8.3.4 Connecting the Camera to Your Smart Device (App)

1. Search iontheaction app in your devices app store.

2. Download and install the app to your smart device.

3. Turn on your Wi-Fi PODZ.

4. Go to the network settings of your device and choose Wi-Fi settings. Search the network, find and click “WIFIPODZ”.

5. Enter password “123456789” to connect to your camera.

6. Open your app.

7. Please refer to the app page for detailed operating instructions.

9. Sealing Your Camera to prevent water damage

The Waterproof Housing (standard PODZ on iON Air Pro 2 camera and Wi-Fi PODZ in Air Pro 2 Wi-Fi) allows you to operate the camera up to 10 meters or 30 feet under water. You must seal the camera with the PODZ in order to protect the camera when using it in wet or moist conditions.

Notes:

1. The rubber seal on the PODZ forms the waterproof barrier to protect the camera in wet and underwater conditions. You must keep this seal clean as a single strain of hair or grain of sand can cause leakage into the product.

2. After every use in salt water, you will need to rinse the outside of the product and the seal with non-salt water and dry. Not doing this can cause corrosion in the product or failure in the seal, in turn, damaging the product.

Warning:

Please ensure you install and lock the PODZ correctly before using the camera to avoid water damage. Failure to properly seal your camera can result in leaks that damage or destroy your camera. Your warranty does not cover water damage resulting from user damage.

10. Troubleshooting

Problems Causes Solutions

1. LED flashes and the camera turns off

2. The iON camera will not turn on.

Red LED flashes during recording

Cannot take photos or video (Green LED flashes)

Battery is depleted

Low battery

Memory full

Cannot take photos or video (Green and Red

LED flashes alternatively)

1. MicroSD card is not inserted

2. MicroSD card has not been formatted properly.

Recharge the camera

Recharge the camera

Replace with a memory card with space available .

1. Insert a MicroSD card

2. Format the MicroSD card on a PC

Cannot find removable disk after connecting the camera to the computer.

Connection failure.

1. Make sure all cable connections are secured and restart the computer if necessary.

2. Try a different USB port.

11. Specifications

Sensor

Lens

Focus range

Video

Photo

Audio

Storage

Connection

Power

Housing

14 Mega pixel sensor

180º super wide angle field of view

0.4m - ∞

1080p: 1920x1080 pixels (16:9), 30 fps

960P*: 1280x960 pixels (4:3), 30 fps

720p: 1280x720 pixels (16:9), 60 fps

720p *: 1280x720 pixels (16:9), 30 fps

Format: H.264 compression, saved as MPEG4 (.mp4) file

Dual video files for easy sharing

16.0 Mega Pixels:(4608x3456)

14.0 Mega Pixels(4384 x3288)

5.0 Mega Pixels: (2592x1944)

VGA:(640 x480)

Format: JPEG

Capture Modes: Single, Burst-shot*, Time lapse*

Built-in high quality microphone

2.5mm External microphone (not included)

AAC Compression, Automatic Gain Control

MicroSD/MicroSDHC with minimum Class 6 up to 32GB (not included)

Average Recording Times: about 4 hours (using 32GB mSD card in 1080p30/720p60)

USB2.0 (for data connection and battery charging)

HDMI

External Microphone

Built-in 1200 mAH Rechargeable Li-Polymer Battery

Battery Life: Approx. 2 hrs/( 1 hr when operating with Wi-Fi

PODZ in Air Pro 2 Wi-Fi)

High quality Aluminum barrel and rubberized finishing

Depth up to 30 feet / 10 meters

Dimension 40 x 40 x 108 mm

Weight ~127.8(w/ PODZ), ~133.2g (w/ Wi-Fi PODZ)

* Settings can be changed through iON software or Mobile Apps.

12. System Requirements

Operating system Windows® 7/XP SP3 /Vista and Mac 10.5 or above

CPU Pentium III or above

Interface USB 2.0 port

IMPORTANT

• Keep the lens clean. Dirt and fingerprints will affect the quality of the picture.

• Close the PODZ properly for optimum water sealing. Do not open under water.

• Rinse the camera with clean water after use and keep it dry for storage.

• Please refer to the detailed operation instructions in the user manual

TRADEMARK INFORMATION

© 2012 World Wide Licenses Limited.

® The iON logo is a registered trademark of World Wide Licenses Limited.

CamLOCK, PODZ, Shoot/Share and Air Pro 2 and their respective logos are trademarks or registered trademarks of World Wide Licenses Limited in the United States and other countries. Copyright © 2012. All Rights

Reserved.

FCC Statement

This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference that is received, including any interference that may cause undesired operation.

Caution Statement

“Modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.”

RF exposure warning

A normal operating mode is helmet mounted!

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 10mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying

RF exposure compliance."

Ad Hoc function is supported but not able to operate on non-US frequencies.---WIFI

Do not use the device with the environment which below minimum -10℃ or maximum over.

Instruction Statement

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

WARNING: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY

RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED

MODIFICATIONS TO THE DEVICE. ANY SUCH MODIFICATIONS

COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Questions?

Need Some Help?

This manual should help you understand your new product.

If you still have questions, visit our website: www.iontheaction.com

Like Us: www.facebook.com/ionthea ction

Tweet Us: www.twitter.com/iontheactio n