Reconfigure Your System
3. Reconfigure AMI WinBIOS System
3.1. Enter AMI WinBIOS Configuration Program
During power-on memory test, pressing the <Del> key will bring the SETUP
main menu to the screen. You can use the <Tab> Key to move to the next
window and use the <Enter> key to make selection in the current window.
Pressing <Alt><H> will bring up the help menu.
En == == ha к,
; e м = . ss м -
ES Ea x: > - .
She TS
se. Tad
“
a
a Sw
ok
E EE me
CME uN me San
3 к
a E
- ee sn .
+ SS La Ne CE а Чай sa o " лы
: … A Ca а _ AS ON So : 2
. o …- Ce o ak
x E y 1 Teh
cis
re
и ee ee Ча con
a Ci № e : о E or
o hab Xu о sn Se. >, a :
+ E A. A
= = cu, SC EE CES = E an Ye AE a o re
Ben Tare, Time. Floppy, Hard Di a FE FE НЕ, y =
N ry NE a A . си и ^^ Ne Le ee ая ".. REA ar - Jin У E Oo 6 я Ta
Eos NE E a de eN RE ASS ce E E TE TE
Figure 3-1 The screen of WinBIOS SETUP PROGRAM
NOTE : Use mouse cursor to select a desired option. After highlighting
the option, press the <Enter> key to enter its menu.
Reconfigure Your System
3.2. Standard Setup
The WinBIOS setup options described in this section are selected by choosing
the appropriate high-level icon from the WinBIOS Setup main menu selection
screen. The selected windows is as follows.
= AN ne
Advanced Chipset
Power Mgmt
Figure 3-2 The screen of STANDARD SETUP
You can move the cursor to select the “Date/Time”, “Floppy A”, “Floppy
B”, “Master Disk” or “Slave Disk” icons, then press the <Enter> key to set
them up.
The STANDARD SETUP screen 15 as follows.
feng + Sof po EE a "рус
Sindee RER RE Ея nue rs
oe Pe a o: pente e : Lh а
do Tete e E EE A Te a en Ra
e e Standard §7 tu
we pr
= и RT TET Th, mars = = ET mone na TS rh
E RE ee
8 A y Cia ee nn
o EME
ny Le,
ae 5 =
me = + = = ;
:
Ie O O E E TE EE
OEM EUR e e E TEE REID REED ER CS TE Y A Ec :
1 uh . - -
STINT ©. . LH" 1 1 + Lo;
и = т" "a и ‘ "и ‘ "eo, зе ‘ N [a] = laa at и ‘ Lie pie . cu
Ta
7
Wi
=
=!
Tes „ah
AE
E
LP
Figure 3-3 The screen of STANDARD SETUP
3.3. Advanced Setup
Reconfigure Your System
System Keyboard : Present
Primary Display : VGA/EGA
Above IMB Memory Test : Disabled
Extended BIOS RAM Area . 0:300
System Boot up Num Lock : On
Floppy Drive Seek At Boot : Disabled
System Boot Up Sequence : C:, À:
‘System Boot Up CPU Speed - High
External Cache - Enabled
Internal Cache “Enabled _ I
Password Checkmg ; Setup 5
Video Shadow C000, 16K - Enabled
Video Shadow C400, 16K . Enabled
В Shadow C800, 16K . Disabled a
“Shadow CC00, 16K Disabled
Shadow D000, 16K : Disabled
| Shadow D400, 16K : Disabled
Shadow D800, 16K : Disabled
Shadow DC00, 16K : Disabled
| Shadow E000, 64K ; Disabled
Block Mode : Disabled
IDE Prim Controller 32Bit xfer : Disabled
IDE Prim Master HDD LBA Mode - Disabled
IDE Prim Slave HDD LBA Mode : Disabled
Number of HDDs in Sec Controller . None
* Your BIOS can support 4 Hard Disk by changing "None" to "2" of
Number of HDDs in Sec Controller
о Block Mode : Disabled If your hard disk drive supports IDE block transfer
mode, enable this option for faster IDE hard disk drive transfer rate,
« IDE Prim{Sec) Master (Slave) LBA Mode : Disabled LBA {Logical Block
Addressing) mode is for a new HDD accessing method to overcome the 528
Megabyte bottleneck.
Reconfigure Your System
3.4. Chipset Setup
Auto Config Enabled
B Hidden Refresh : Enabled
i Slow Refresh - Disabled
Single ALE Enable : Мо
Keyboard Reset Control : Disabled
| Master Made Byte Swap : Disabled
AT Bus Clock Control
Fast AT Cycle
Non - Cacheable Block-1 Size | “Disabled
| Non - Cacheable Block-1 Base Disabled
Non - Cacheabie Block-2 Size : Disabled
Non - Cacheable Block-2 Base ; Disabled
Video Cacheable C000, 16K No
Video Cacheable C400, 16K : No
Auto Config Function : Enabled. The BIOS automatically configures six
features that are listed below, based on detection of the CPU clock speed.
Auto Config Function : Disabled. Allow user manually configures those
features.
Reconfigure Your System
If CPU clock 15 33MHz, 40MHz, 5S0MHz, 66MHz, 80MHz or 100MHz, then
change the © Chipset setup as shown as > ollowing La table :
AT Bus Clock |) 1a CLKI4 | CLKIA
Selection
DRAM Burst Cycle! 4-3-3-3 * 4-3-3.3* | 5-44-4
Memory Write
Wait state 0 ! ! ! !
Cache Read Cycle | 2-2-2-2 3-2-2-2 3-2-2.2 3-2-2-2 2-2-2-2 2-2-2-2
Cache Write Wait
State 0 0 | 1 0 0
AT Cele Walt | Disabled | Enabled | Enabled | Enabled | Enabled | Enabled
Reconfigure Your System
3.5. Power Management Setup
Mode Select
IRQ 5 Monitor a a A
IRO 6 Monitor : Enabled
IRC 10 Monitor
__ Disabled
TIRO 12 Monitor : Disabled
: Disabled
; Disabled
board IO Port Monitor
Hard Disk TO Port Monitor
Vi
APM Function
The OPTi 895 GREEN PC provides two GREEN Modes in Power
Management Mode.
« The AUTO GREEN Mode is used to accommodate non-SL CPU's.
e The SMI_GREEN Mode is used to accommodate SL CPU's.
You can monitor the following events for GREEN Mode.
Reconfigure Your System
IDE Power Down
This option specifies the length of time of hard disk drive inactivity that must
expire before the IDE hard drive cnter the IDE Standby Power Down Mode.
The settings are from / Min to 15 Min or Disabled. IDE Power Down is an
individual feature with independent timeout timer and not affected by Power
Management Mode Select.
Power Management Mode Select
OPTI 895 mainboard provides two Power Management mode, Auto_mode for
non SL-Series dynamic CPU, it slows down CPU clock speed to 8 MHz;
SMI mode for SL-Series/P24C CPU, it may slow down CPU clock speed to
0 MHz (stop_clock) when system timeout timer expires. Please refer to
section 3.6 Definition of Power Management States.
System Timeout
This option specifies the length of time for system enter Auto_mode or
SMI_mode power management state. The timer options are 15sec, 2min,
Smin, 30min, 43min, Ihr, or 4hr. The timer can be reloaded by any IRQs,
DROs, keyboard, video, hard disk and floppy accesses.
Reconfigure Your System
IRQ 1 (~15) Monitor
Enabled these options will allow the IRQs (Interrupt Request) input to be
monitored for both inactivity for entering Auto mode/SMI mode and activity
for enterng Normal mode.
IRQ: Keyboard Default - Enabled
IRQ3: COM2, 4 Default - Enabled
IRQ4: COMI, 3 Default - Enabled
IRQS: LPT2 Default - Disabled
IRQS6: Floppy Disk Default - Enabled o
[RQ7: LTP1 Default - Disabled
ROS: RTC — Default - Disabled |
[В ОЭ: Redirection IKQ2 Default - Disabled
“IRO14: Hard Disk Default - Disabled
IRQIO, 11,12, 15: Reserved © Default - Disabled
DRQ 0 (- 7) Monitor
Enabled these options will allow the ОКО (DMA Request) input to be
monitored for both inactivity for entering Auto mode/SMI mode and activity
for entenng Normal mode.
DRO2: Floppy Disk Default- Disabled
DRQ 0, 1, 3, 5, 6, 7: Reserved Default - Disabled
-_—-
Keyboard 1/0 Port Monitor
Enabled this option will allow you to gain accesses on port 60h and 64h to be
monitored for both entering Auto mode/SMI-mode and exiting
Auto mode/SMI mode.
Floppy 1/0 Port Monitor
Enabled this option will allow floppy port (3F5h) accesses to be momtored
for both entering Auto mode/SMI mode and exiting Auto mode/SMI mode.
Hard Disk 1/0 Port Monitor
Enabled this option will allow hard disk port (1FOh to 3F6H) accesses to be
monitored for both entering Áuto_mode/SMI_ mode and exiting
Auto_mode/SMI_mode.
Reconfigure Your System
Video Memory Monitor
Enabled this option will allow video memory (A000 to BFFFF} accesses to
be monitored for both entering Auto_mode/SMI mode and exiting
Auto_mode/SMI_mode.
Video VO Port Monitor
Enabled this option will allow video ports accesses to be monitored for both
entering Auto_mode/SMI_mode and exiting Auto_mode/SMI_mode.
Screen Sleep
This option specifies screen sleep when system enter Auto mode or
SMI_mode power management state. If the option is Sleep, the display will
turn to blank when system enter to Auto/SMI mode, If the option is
Non-STeep, the display will freeze when system enter Auto/SMI mode.
APM Function
This option specifies the system Enabled or Disabled APM (Advanced Power
Management) Function,
It 1s no need to install an APM program for most CPUs, but you must install
the APM program if you use the stop clock Green function (SMI).
Caution: If you don't install the APM program and enable the "System
Timeout" item. Afler the timer stops, the system will has timer problems when
the system wakes up.
For an OS that provides APM function :
At present, only Microsoft DOS 6.x and Windows 3.1 provide APM
programs.
I. For Microsoft DOS 6.x, the APM program's filename is POWER EXE.
To install the APM , add the following statement to your config.sys file:
Device = C\DOS\POWER EXE
2. To install the APM in the Microsoft Windows 3.1 program:
In the Windows directory, execute Setup and highlight the item
"COMPUTER," then choose the option "MS-DOS system with APM."
in the Windows "MAIN" group, execute Control Panel and choose
"POWER," then set "Power Management in Advance." APM installation is
then completed.
Reconfigure Your System
3.6. Definition of Power Management States
Normal Mode
(Power Management Mode set
to” Disabled")
CPU Type Non SL- Series CPU or SL-Series CPU
o System Time-out Timer “Not Available
CPU Clock Full Speed
Screen Steep Not Available
Monitor Power Down Not Available
{By Ext. power control port)
IDE Standby Power Down Available
(Independent Time-out Timer 1Min~15
Min)
Auto_Mode
(Power Management Mode set to" Auto")
CPU Type
Non S- Series CPU
System Time-out Timer
15 sec — 4 hours
{Screen Sleep set to "Sleep" )
CPU Clock Slow Down to 8 MHz
(When system Time-out Timer Expires)
Screen Sleep Available
Monitor Power Down Not Available
(By Ext. power control port)
IDE Standby Power Down Available
(Independent Time-out Timer 1Min~13
Min)
Reconfigure Your System
УМ Моде
(Power Management Mode set to"SMI")
CPU Type SL- Series CPU and Intel P24C
System Time-out Timer 15 sec ~ 4 hours
Ш CPU Clock Slow Down to 0 MHz :
(When system Ttme-out Timer Expires)
Screen Sleep Available
(Screen Sleep set to "Sleep”)
Monitor Power Down
(By Ext. power control port)
Available
(Green Power Supply 15 needed)
IDE Standby Power Down
Available
(Independent Time-out Timer 1Min-15
Min)
3.7. Utility
color of Win BIOS
3-11
Reconfigure Your System
3.8. Password Setup
WinBIOS Setup has an optional password feature. The system can be
configured so that all users must enter a password every time the system is
booted or when you select the password icon in the "Security" window.
Enter Mew Pas
Figure 3-4 The screen of PASSWORD SETUP
You can enter a password by :
* Typing the password on the keyboard.
e Selecting each letter via the mouse, or
» Selecting each letter via the pen stylus.
Pen access must be customized for each specific hardware platform.
The password check option in ADVANCED SETUP (P.3-3) can be enabled
by choosing either always (the password prompt appears every time the
system 15 power on) or sefup (the password prompt will appear only when
WinBIOS setup is run). The password entered is stored in CMOS RAM.
Reconfigure Your System
Entera 1-6 character password, The password docs not appear on the screen
when typed. WinBIOS will ask you to retype the password. WinBIOS will
then display the following :
тор AT rar Tareword
МТУ ы лил E L. ui mi MEA DE Eo E тет Зее; т. ее Nm A - ие 7 т т „и e = « cie = бт ое От пл НО И "= Ge
Figute 3-5 The screen af PASSWORD SETUP
Select the "Password icon from the “security” section of the WInBIOS Setup
main menu, Enter the password and press <Enter>. The screen does not
display the characters entered. After the current password is entered, enter the
new password as prompted and press <Enter>.
If the password confirmation is incorrect, an error message appears. If the new
password is correctly entered, press <“Esc> to retum to the WinBTOS Setup
main menu, the password is stored in CMOS RAM after WinBIOS Sclup
completed. The next time the system reboots, you are prompted for the
password if the password function is present and is cnabicd.
Reconfigure Your System
3.9. Anti-Virus
When this icon is selected from the Security section of the WinBIOS Setup
main menu, WInBIOS gives a warning when any program (or virus) Issues a
Disk Format command or attempts to write to the boot sector of the hard disk
drive. The following screen appears when you select the Anti-Virus icon :
SE
Ларин
К: Hard
AMIA
1 "
There are two settings, Enabled or Disabled. If enabled. the following
massages appears when a write is attempted to the boot sector. You may have
to type N several times to prevent the boot sector write.
Boot Sector Write !!!
Possible VIRUS : Continue (Y/N)? —
The following massage will be displayed after any attempt to format any
cylinder, head, or sector of any hard disk drive via the BIOS INT13 Hard Disk
Drive Service :
Format !!!
Possible VIRUS : Continue (Y/N)? _
You should disable anti-virus protection when you try to format a hard disk
drive.
If the anti-virus feature is enabled, a virus warning message will be displayed
when you attempt to format the hard disk drive.
If you select continue, formatting proceeds as normal.
If you do not want to continue formatting, you may have to press N several
times (depending on how many retrics arc performed by the upper-level
software}. DOS, for example, does at least {ive retrics before the format utility
is actually aborted.
Reconfigure Your System
3.10. Default
The icons in this section allow you to select a group of settings for all
WinBIOS Setup options. You can use these icons to configure system
parameters quickly for preferable settings.
Original
Choose the Original icon 10 retum to the system configuration values present
in WinBIOS Setup .
Optimal
You can load the optimal default settings for the WinBIOS Setup options by
selecting the Optimal icon. The Optimal default settings are best-case values
that should optimize system performance. If CMOS RAM is corrupted, the
Optimal scttings are loaded automatically.
Fail-Safe
You can load the Fail-Safe WinBIOS Setup option settings by selecting the
Fail-Safe icon from the Default section of the WinBIOS Setup main menu.
The Fail-Safe settings provide far from optimal system performance, but are
the most stable settings. Use this option as a diagnostic aid if the system 1s
behaving erratically.
Appendix
4. Appendix
- Tape i Cybmders ii Need Write Process” = "| IZ ch Chester | Aa
1 MM 4 128 +85 17 10ME
2 615 4 300 615 17 WME
3 41. 6 ма. 615 17 J1MB
4 | 90° 3 $12 me | AT ¿2MB
5 0 6 Md: 90 | AT 47MB
is 4 555 as a WME
7 “4 8 15: : 511 17 HME
a лы 5 “ns: 233 1 MMB
9 500 15 65535 901 17 112MB
10 $ 3 64435. $20 17 20MB
11 355 5 65535. 955 17 ASME
12 #55 7 “5535 855 17 МВ
13 386 £ 138 319 17 HME
14 783 7 65535 733 17 43MB
15 — — — — - —
16 “iz 4 0 su 17 20ME
17 977 5 300 “77 17 41MB
o“ 977 7 63535 377 17 57MB
; 18 1874 7 517 1623 17 £UMB
| 20 733 « за 737 17 30MB
71 733 7 200 73; 17 4IME
| 13 |! 733 5 309 733 17 OMB
23 306 4 . 35% 17. 10MB
24 + 7 # 425 17 s4ME
15 25 9 65535 925 17 69MB
26 754 7 754 754 17 44MB
27 754 11 65535 754 17 SMB
28 “99 7 256 6. 17 41MB
19 + 19 65535 823 17 saMB
30 15 7 918 sit 17 SIMB
31 1674 11 65535 1024 17 “ME
32 1024 15 65535 1024 17 129MB
33 1824 5 1074 1024 17 {IME
34 612 2 18 612 17 10MB
35 1074 y 65535 1024 17 TIME
м 1024 8 512 1024 17 IMB
17 hi5 % fra 615 17 41ME
38 #87 4 e ox? 17 15ME
39 "wy 7 ” 987 17 57MB
46 320 $ 32 #20 17 41MB
41 #77 5 977 977 17 41MB
42 981 5 931 95 17 41MB
4} £30 7 512 эм 17 4EMB
44 £30 10 65535 1 17 MB
45 917 15 РА 18 17 114MB
4“ 1124 15 65535 1773 1? 151MB
47 — — — _ _ _
Ha
'
Ina
">