advertisement
WITH RFID PROTECTION
BY HALO
TM
Operating Instructions
What’s Included With Your HALO
Detachable
Standard USB-
Micro USB cable h
Detachable
Standard USB-
Lightning cable h
Detachable
Standard USB-
30 pin cable h
Getting To Know Your HALO Phone Charger
Power button/LED battery indicator/Standard USBOUT port (2A)
TM
Built-in Standard USB IN cable
Standard
USB
OUT port (1A) h
1
To Turn On/Off the HALO Charger
To turn on, press the power button/USB OUT port on the top of the HALO charger and the LED lights around the port will illuminate. Press and hold the power button/USB OUT port for three seconds to turn off.
Power On/Off Button
Charging the HALO Charger
Wall Adapter
(not included)
Computer h h h h
Using the built-in Standard USB IN cable, plug the
USB tip into the Standard USB port on your computer or an AC adapter (not included) that accepts Standard
USB. Your HALO charger will automatically begin charging.
2
Check Your HALO Charger’s Battery Level
Indicator Light How To Read Amount of Charge
Red light 0%-33%
Yellow light 34%-66%
Green light 67%-100%
Reading Your LED Battery Indicator
While Charging Your HALO Charger
Indicator Lights How To Read Amount of Charge
Red light blinking 0%-33%
Yellow light blinking 34%-66%
Green light blinking 67%-99%
Solid green light 100% fully charged
3
Choosing the Appropriate Cable to Charge Your
Personal Electronic Device
Model Corresponding Cable/Tip iPhone 4, 4s, iPod classic, iPad 1, 2, 3, iPod nano
& earlier models h
Standard USB-30 pin Cable iPhone 5, 5c, 5s, iPad 4, iPad Mini, iPad w/retina, iPod nano w/multi-touch and retina displays h
Standard USB-Lightning Cable
Android, Samsung and Windows Phones
& Tablets h
Standard USB-Micro USB Cable
Charging Your Personal Electronic Device iPhone 4, 4s, iPod Classic, iPod Nano and
Earlier iPhone/iPod Models
1. Using the provided Standard USB-30 pin cable, plug the Standard USB end into one of the USB OUT ports on the HALO charger.
2. Plug your personal electronic device into the 30-pin tip end of the cable and your device will automatically begin charging.
iPhone 5, 5c, 5s iPod Nano w/Multi-Touch
and Retina Displays
1. Using the provided Standard USB-Lightning cable, plug the Standard USB end into one of the USB OUT ports on the HALO charger.
2. Plug your personal electronic device into the
Lightning end of the cable. Your device will automatically begin charging.
Android, Samsung and Windows Phones/Tablets
1. Using the provided Standard USB-Micro USB cable, plug the Standard USB end into one of the
USB OUT ports on the HALO charger.
2. Plug your personal electronic device into the Micro
USB end of the cable. Your device will automatically begin charging.
For Other Personal Electronic Devices
Certain electronic devices (such as Nook Color, Nook
HD, Samsung Galaxy Tab 2 & 3) have special connectors. If your personal electronic device does not accept one of the provided connectors, please use the cable provided with your device for charging.
Plug the Standard USB end of the cable that came with your device into one of the Standard USB OUT ports on the HALO charger. Plug your personal electronic device into the other end of the cable and your device will automatically begin charging.
To contact us, email us at [email protected]
or call 888-907-6274
HALO2CLOUD, LLC
148 Eastern Boulevard
Glastonbury, CT 06033 USA www.halo2cloud.com
The HALO cloud logo is a registered trademark of
HALO2CLOUD, LLC
Charging Two Electronic Devices
You can charge two devices simultaneously by using both Standard USB OUT ports on your HALO charger at the same time. You can use two of the three provided cables at the same time, or you can use one of the provided cables plus your own cable that came with your personal electronic device.
Charging Tablets
Your HALO charger is equipped with two Standard
USB out ports: a 1A port and a 2A port. Both can be used for charging your personal electronic devices and can be used simultaneously. When charging tablets and other large electronic devices, it is recommended to use the 2A (port/power button/LED battery indicator). The 1A port can also be used and will not harm your tablet or personal electronic device; however, the 2A port will charge your larger devices faster than the 1A port.
Intelligent Recognition
The HALO charger is programmed with an intelligent recognition system to achieve higher compatibility for charging different mobile phones. If it does not charge when connected to your mobile phone, please restart the power charger.
Compatible with:
Mobile phones, Tablets, PSP, NDS, MP3, MP4, MP5,
Bluetooth GPS, Cameras and more
About RFID
RFID stands for ‘Radio Frequency Identification.’ Newer credit cards and Passports may contain an RFID chip, which allows wireless, automatic transfer of data.
Check with your credit card company or
Passport issuer to see if yours contain an RFID chip.
Your HALO Power Wallet is lined with RFID blocking material that blocks transfer of data between your personal credit cards and wireless RFID readers. The
RFID material is located throughout the main lining of the wallet, however, in order to be fully protected and blocked, your wallet must be closed, so all contents are effectively shielded. Exposing your wallet to high heat
(e.g. with an iron, oven, dryer, etc.), high humidity or getting it wet will damage the RFID material and may cause it not to work.
Storing/Handling/Cleaning
- Do not get wet or store in extreme temperature conditions.
- Do not disassemble or attempt to repair yourself.
- Use a soft cloth with soap to clean the exterior of your
HALO charger. Do not use liquid detergent or chemicals of any kind.
Safety Precautions
- This HALO charger has been designed and manufactured to ensure personal safety. Please read the following carefully before using. Incorrect operation or incompatibility with your personal electronic device may result in reduced battery performance or damage.
- Carefully read the operating instructions, and use the
HALO charger correctly
- Caution: The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated. Do not disassemble, expose to heat above 212°F (100°C) or incinerate.
- Misusing or incorrectly connecting the HALO charger may cause electric shock to users and damage equipment. The HALO charger may become warm under extended high power operation. During operation, keep the HALO charger away from materials that may be affected by these temperatures.
- When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power.
However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices.
- Do not disassemble the HALO charger. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
- Do not drop or subject to strong impacts. Do not operate the HALO charger if it has received a sharp blow, or otherwise been damaged in any way.
- Do not expose the HALO charger to moisture, water, rain, or snow.
- Do not insert any object into the ports or openings of the
HALO charger.
- Never charge the HALO charger unattended.
- There is a risk of the batteries exploding, overheating, or igniting. Do not disassemble, modify, heat or short-circuit the batteries. Do not place in fire or leave
in hot places. Do not expose to direct sunlight.
- Only charge the HALO charger by the specified method with the specified USB cable.
- In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.
- Batteries should be recycled or disposed of as per state and local guidelines.
Specifications
Battery Cell: rechargable lithium polymer battery
Capacity: 3000 mAh
USB Output: 5V/2A
USB Output: 5V/1A
Input: 1A
Dimensions: 5”x 3.3”x 0.4” (126 x 83 x 11 mm)
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
15.21 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105(b) This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty
HALO2CLOUD, LLC warrants its products to be free from defects in material and workmanship under normal use. Conditions are as follows:
- During the first one year from date of purchase,
HALO2CLOUD, LLC will repair or replace the defective product.
- HALO2CLOUD, LLC will, subject to inspection, repair the defective product or replace it with a new or reconditioned unit. The return must be accompanied by a Return Materials Authorization (RMA) number to be issued upon request, and must be shipped prepaid.
A shipping rebate will only be extended to the
customer in the event that a defect in material or workmanship is confirmed.
- Warranty is void if the product has been improperly handled or misused in any way, or if the label and/or bar-coded warranty label has been removed or tampered with.- Warranty returns require a check for
$14.95 for processing and handling made payable to
HALO2CLOUD, LLC.
- Where applicable, all requests for warranty returns must be accompanied by a proof of purchase and be sent to HALO2CLOUD, LLC (www.halo2cloud.com).
- The warranty does not extend to the electronic equipment that is used or which incorporates with any of our products and accessories. HALO2CLOUD, LLC shall not be held responsible for the improper use of its products.
12
h
R
To contact us, email us at [email protected]
or call 888-907-6274
HALO2CLOUD, LLC
148 Eastern Boulevard
Glastonbury, CT 06033 USA www.halo2cloud.com
The HALO cloud logo is a registered trademark of
HALO2CLOUD, LLC
Designed in USA
Patent Pending
Made in China
The material used on this item is a Man Made Material
advertisement
Related manuals
advertisement