- Computers & electronics
- Telecom & navigation
- Screen protectors
- Panasonic
- CF-VPF01U
- Operating instructions
advertisement
ENGLISH
OPERATING INSTRUCTIONS
Protective Film
Model No.
CF-VPF series
DFQX5315RA ZZ0302-7060
Printed in Japan
© Panasonic Corporation 2002-2010
Thank you for purchasing this Protective Film.
Applying this Film to the face of any screen will protect the screen from dirt and abrasions.
This protective film is a disposable item.
Protective Film
OPERATING INSTRUCTIONS
Spatula
1
1
1
How to apply the Protective Film
Peel-off sheet
Protective Film
Silicon emulsion side
CAUTION
Do not bend the Protective Film. Creases may prevent the Film from being applied smoothly to the touchscreen, and may make the screen difficult to see.
1
Use a specialized cloth to remove dirt, dust, fingerprints, etc., from the screen surface. (Soft Cloth, Model No. CF-VNC001)
If the Protective Film is applied while foreign matter remains on the screen surface, air bubbles or abrasions may result.
Peel-off sheet Tape 2
Hold the tape segment, and peel back
Film by about 3 cm.
At this time, do not touch the exposed part of the Protective Film, or leave the Film lying around, as dust or other foreign matter might settle on it.
3
Align the silicon emulsion side of the the peel-off sheet) with the screen, and carefully attach the Film to the screen while peeling off the peel-off sheet.
If the Film is positioned incorrectly, or if large air bubbles are visible, peel off the Film and re-apply.
If dust or other foreign matter should settle on the silicon emulsion side of the Protective Film, remove it with cellophane tape.
4
Use the spatula provided to remove any
Remove air bubbles by pushing them toward the outer edge of the screen, as shown in the figure. Do not apply too much force, as damage to the screen may result. Also, be careful not to scratch the surface of the
Protective Film with the corner of the spatula.
1 mm
Spatula
1 mm
When removing the Protective Film, be careful not to scratch the screen with your fingernails, etc.
Peel off the Protective Film slowly and carefully.
If the surface of the Protective Film becomes dirty, wipe it with a specialized cloth. Wiping with other materials may cause deterioration in the quality of the Protective Film.
Even after the Protective Film has been applied, be sure to use only your fingertip or the specialized stylus/digitizer pen to operate the touchscreen or the digitizer. Using objects other than the specialized stylus/digitizer pen may cause deterioration in the quality of the Protective Film.
Specifications
Model No.
CF-VPF01U
CF-VPF02U
Dimensions (W × H), Type
171.3 mm × 128.8 mm {6.7”× 5.0”}, 8.4 Type
245.9 mm × 184.4 mm {9.7”× 7.2”}, 12.1 Type
CF-VPF03AU/CF-VPF05U/CF-VPF14U 270.3 mm × 202.3 mm {10.6”× 8.0”}, 13.3 Type
CF-VPF06U/CF-VPF07AU/
210.8 mm × 158.0 mm {8.3”× 6.3”}, 10.4 Type
CF-VPF08U/CF-VFP11U
CF-VPF12U 123.0 mm × 72.2 mm {4.8”× 2.8”}, 5.6 Type
CF-VPF13U
CF-VPF15U
210.8 mm × 156.5 mm {8.3”× 6.2”}, 10.4 Type
265.4 mm × 198.2 mm {10.4”× 7.8”}, 13.1 Type
DEUTSCH
BEDIENUNGSANLEITUNG
Schutzfolie
Modell-Nr.
CF-VPF-
Serie
Wir danken Ihnen für den Kauf dieser Schutzfolie.
Indem Sie diese Folie auf die Oberfläche eines beliebigen Bildschirms auftragen, wird der
Bildschirm vor Schutz und Abnutzung geschützt. Bei dieser Schutzfolie handelt es sich um einen Einwegartikel.
Schutzfolie
BEDIENUNGSANLEITUNG
Spachtel
1
1
1
Anbringen der Schutzfolie
Deckfolie
Schutzfolie
Siliziumschichtseite
1 abdrüke usw. von der Bildschirmoberflähe zu entfernen. (Tuch,
Modell Nr. CF-VNC001)
Die Schutzfolie darf nicht verbogen oder geknickt werden. Falls die Schutzfolie Falten aufweist, kann sie u.U. nicht plan liegend am
Touchscreen befestigt werden, wodurch die Betrachtung des Bildschirms erschwert wird.
Verwenden Sie ein Spezialtuch, um Schutz, Staub, Finger-
Falls Sie die Schutzfolie auftragen, während sich Fremdkörper auf der Bildschirmoberfläche befinden, können sich Luftblasen und Abreibungen bilden.
2
Halten Sie den Bandabschnitt fest und ziehen Sie die auf der Schutzfolie befindliche Folie um etwa 3 cm ab.
Berühren Sie nicht den freiliegenden Teil der Schutzfolie bzw. lassen Sie die Schutzfolie nicht herumliegen, das sich
Staub und andere Fremdkörper darauf absetzen könnten.
Deckfolie Band
Panasonic Corporation
Panasonic Solutions Company
3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive Mississauga, Ontario L4W 2T3
3
Richten Sie die Siliziumemulsionsseite der ziehblatt) auf den Bildschirm und befestigen Sie die Folie vorsichtig am Bildschirm, während Sie das Abziehblatt abziehen.
Falls die Schutzfolie nicht einwandfrei auf dem Touchscreen positioniert ist oder große Luftblasen sichtbar sind, ziehen Sie die Folie wieder ab und befestigen Sie sie dann erneut mit der korrekten Ausrichtung. Falls sich Staub und andere Fremdkörper auf der Siliziumschichtseite der Schutzfolie absetzen, entfernen Sie diese Fremdkörper mit Cellophanpapier.
4
Verwenden Sie den Spachtel im Lieferumfang, um restliche Luftbläschen zu entfernen.
Zum Entfernen von Luftbläschen schieben Sie diese wie in der Abbildung gezeigt mit dem Spachtel auf den Bildschirmrand hin. Drücken Sie nicht zu stark auf die Folie, da anderenfalls der Bildschirm beschädigt werden kann.
Achten Sie außerdem darauf, die Schutzfolienoberfläche nicht mit der Ecke der Spachtel zu zerkratzen.
1 mm
Spachtel
1 mm
Achten Sie beim Entfernen der Schutzfolie darauf, den Bildschirm nicht mit den Fingernägeln usw. zu zerkratzen.
Ziehen Sie die Schutzfolie langsam und vorsichtig ab.
Bei einer Verschmutzung der Oberfläche der Schutzfolie, reiben Sie diese mit einem
Spezialreinigungstuch ab. Verwenden Sie keine anderen Materialien zur Reinigung, da die Qualität der Schutzfolie dadurch beeinträchtigt werden kann.
Selbst nachdem Sie die Schutzfolie aufgetragen haben, verwenden Sie immer nur die
Fingerspitze bzw. den speziellen Stift/Digitalstift, um den Sensorbildschirm des Digitalumsetzers zu bedienen. Bei Verwendung anderer Gegenstände als den Stift/Digitalstift kann die Qualität der Schutzfolie beeinträchtigt werden.
Technische Daten
Modell Nr.
CF-VPF01U
CF-VPF02U bmessungen (B × H), Typ
171,3 mm × 128,8 mm, 8,4-Typ
245,9 mm × 184,4 mm, 12,1-Typ
CF-VPF03AU/CF-VPF05U/CF-VPF14U 270,3 mm × 202,3 mm, 13,3-Typ
CF-VPF06U/CF-VPF07AU/
CF-VPF08U/CF-VFP11U
CF-VPF12U
CF-VPF13U
CF-VPF15U
210,8 mm × 158 mm, 10,4-Typ
123,0 mm × 72,2 mm, 5,6-Typ
210,8 mm × 156,5 mm, 10,4-Typ
265.4 mm × 198.2 mm, 13,1-Typ
Importer’s name & address pursuant to the EU GPSD (General Product Safety Directive) 2001/95/EC Art.5
Panasonic Computer Products Europe, Panasonic Marketing Europe GmbH
Hagenauer Straße 43 65203 Wiesbaden Germany
Web Site : http://panasonic.net/
DFQX5315RA.indd 1 2010/06/18 14:06:30
FRANÇAIS
INSTRUCTIONS D’UTILISATION
Pellicule de protection
Numéro de modèle série
CF-VPF
Merci d’avoir faire l’achat de cette pellicule de protection.
L’application de cette pellicule sur la surface d’un écran le protégera contre les saletés et l’abrasion. Cette pellicule de protection est un produit jetable.
Pellicule de protection
MODE D’EMPLOI
Spatule
1
1
1
Comment appliquer la pellicule de protection
Pellicule de protection
Feuille détachable
Face à émulsion de silicone
Évitez de plier la pellicule de protection. Les plis risqueraient d’empêcher l’application uniforme de la pellicule sur l’écran tactile, et de réduire la visibilité de l’écran.
1
2
Utilisez un chiffon spécialement conçu à cet effet pour retirer de la surface de l’écran la poussière, les empreintes digitales, etc. (Chiffon doux, Modèle No. CF-VNC001)
Si la pellicule de protection est appliquée sur l’écran alors que la surface de ce dernier comporte encore des corps étrangers, il risque de s’y former des bulles d’air et l’écran risque d’être sujet à l’abrasion.
Feuille détachable Ruban
Saisissez le bout de ruban, puis déta-
Vous devez alors prendre garde de toucher la partie exposée de la pellicule de protection ou de laisser la pellicule traîner, pour éviter que des poussières ou autres corps étrangers ne s’y déposent.
3
Alignez correctement sur l’écran la face de
1 mm 1 mm
Si la pellicule n’est pas bien placée ou si de grandes bulles d’air sont visibles, retirez la pellicule et appliquez-la à nouveau.
Si des poussières ou autres corps étrangers se déposent sur la face à émulsion de silicone de la pellicule de protection, retirez-les avec un bout de ruban de cellophane.
4
Utilisez la spatule fournie pour retirer toutes les bulles d’air restantes.
Retirez les bulles d’air en les poussant vers le bord extérieur de l’écran, tel qu’illustré sur la photographie.
Évitez d’appliquer une trop forte pression, pour ne pas endommager l’écran. Prenez également garde d’égratigner la surface de la pellicule de protection avec les bords de la spatule.
Spatule
Lorsque vous retirez la pellicule de protection, prenez garde d’égratigner l’écran avec les ongles, etc.
Retirez la pellicule de protection lentement et soigneusement.
Lorsque la surface de la pellicule de protection devient sale, essuyez-la avec le chiffon conçu à cet effet. Le fait de l’essuyer avec tout autre matériau risquerait de causer la détérioration de la pellicule de protection.
Même une fois la pellicule de protection posée, vous devez utiliser uniquement le doigt ou le stylet/stylet numériseur conçu à cet effet pour utiliser l’écran tactile ou le numériseur. Le fait d’utiliser un autre objet que le stylet/stylet numériseur spécial risquerait de causer la détérioration de la pellicule de protection.
Spécifications
Modèle No.
CF-VPF01U
Dimensions physiques (L × H), Type
171,3 mm × 128,8 mm, Type 8,4
CF-VPF02U
CF-VPF13U
CF-VPF15U
245,9 mm × 184,4mm, Type 12,1
CF-VPF03AU/CF-VPF05U/CF-VPF14U 270,3 mm × 202,3 mm, Type 13,3
CF-VPF06U/CF-VPF07AU/
210,8 mm × 158 mm, Type 10,4
CF-VPF08U/CF-VPF11U
CF-VPF12U 123,0 mm × 72,2 mm, Type 5,6
210,8 mm × 156,5 mm, Type 10,4
265.4 mm × 198.2 mm, Type 13,1
日本語
取扱説明書
保護フィルム
品番
CF-VPF シリーズ
このたびは、パナソニック製品をお買い上げいただき、まことにありがとうござい
ます。この保護フィルムを画面表面に貼ることにより、汚れや傷から守ることがで
きます。
この商品は消耗品です。
保護フィルム
取扱説明書(本書)
へら
1 枚
1 部
1 本
保護フィルムの貼りかた
保護フィルム
はく離シート
お願い
保護フィルムは折り曲げないでください。折
り目がつくとタッチパネルに密着できなく
なったり、画面が見にくくなったりします。
シリコン膜面
1
画面表面に付着している砂やほこり、指紋などを専用布できれい
にふき取る
画面表面に異物が付着している状態で保護フィルムを貼ると、気泡や傷の原
因になります。
はく離シート テープ 2
テープ部分を持って、保護フィルムについ
ているはく離シートを 3cm 程度はがす
ゴミが付着する原因になりますので、はく離シー
トをはがした部分に触れたり、不用意に放置した
りしないでください。
3
シリコン膜面(はく離シートが貼られて
いた面)を画面側にして位置合わせをし
た後、はく離シートをはがしながらゆっ
くりと貼り付ける
貼る位置がずれたり、大きく気泡が入ったりし
た場合は、はがしてやり直してください。シリ
コン膜面にゴミなどが付着した場合は、セロハ
ンテープ等に転写して取り除いてください。
4
付属のへらを使って、気泡を取り除く
図のように気泡を外側に押し出すようにして取
り除いてください。画面の破損の原因になりま
すのであまり力を入れすぎないようにしてくだ
さい。また、へらの角で保護フィルム表面を引っ
かかないようにしてください。
1 mm
へら
1 mm
お願い
保護フィルムをはがすときは、画面をつめなどで傷つけないようにしてください。
保護フィルムは、ゆっくりとはがしてください。
保護フィルムの表面が汚れた場合は、専用布でふいてください。専用布以外
でふくと保護フィルムの劣化の原因になります。
保護フィルムを貼り付けた場合でも、タッチパネル機能やデジタイザー機能を
使用する場合は、必ず指の腹または専用のスタイラスペン / デジタイザーペン
をお使いください。専用のスタイラスペン / デジタイザーペン以外で使用する
と保護フィルムの劣化の原因になります。
仕様
品番
CF-VPF01U
外形寸法 ( 幅×高さ ), LCD のタイプ
171.3 mm × 128.8 mm, 8.4 型
CF-VPF02U 245.9 mm × 184.4mm, 12.1 型
CF-VPF03AU/CF-VPF05U/CF-VPF14U 270.3 mm × 202.3 mm, 13.3 型
CF-VPF06U/CF-VPF07AU/
CF-VPF08U/CF-VPF11U
CF-VPF12U
210.8 mm × 158 mm, 10.4 型
CF-VPF13U
CF-VPF15U
123.0 mm × 72.2 mm, 5.6 型
210.8 mm × 156.5 mm, 10.4 型
265.4 mm × 198.2 mm, 13.1 型
パナソニック株式会社 IT プロダクツビジネスユニット
〒 570-0021 大阪府守口市八雲東町一丁目 10 番 12 号
DFQX5315RA.indd 2 2010/06/18 14:06:33
advertisement