Digitus DA-30110 mobile headset

 | DIGITUS |
BLUETOOTH 2.0
ALUMINIUM HEADSET
User Manual
(DA-30110)
Bluetooth headset should be used with the
compatible devices which support bluetooth
wireless technology. This allows you the
freedom to make any calls at any time.
Please read this user manual carefully before
using the headset, and also read your device's
user manual regarding the bluetooth function,
and pay attention to those important safety and
maintenance information.
Please keep the headset away from children.
Specifications
Bluetooth Specification V2.0+EDR
Bluetooth Profiles Supported Headset, Handsfree
Transmission Power Class 2
Operation Range Up to 10 Meters
Frequency Range 2. 4-2. 4835GHz
Battery Built-in Rechargeable
3.7V/50mAH Li-polymer Battery
Charging Voltage DC5.0-6.5V
About 2 hours
Charging Time
Talk Time * Up to 3 hours
Standby Time * Up to 50 hours
Dimensions(mm) L53. 5XW13. 5XH6
About 6.69
Weight
*May vary due to user's operation mode and device settings.
Structure Sketch
1.Earpiece 5.Ear Hook
2.Microphone 6.Indicator Light
3.Charging Socket Cover 7.Multifunction Button(MFB)
4.USB Charging Socket 8.Charging Base
Basic Operations
Charging Your Headset
* Prior to using the headset for the first time,
please fully charge the battery. Insert the
headset into the charging base, and connect
it with a PC or USB equipments which supply
USB power.
e 2 hours are required to fully charge the
headset.
The indicator light turns red while being
charged, and will turn off automatically after
being fully charged.
e When the headset is running out of battery,
the indicator light will flash red(the headset
will switch off automatically when the battery
is drained). Please charge the headset as
above steps in time to prolong the battery's
useful life (Charging indication will be delayed
for a few minutes if the headset has not been
used for along time or the battery is drained).
Note:
e Use only the supplied charger/USB charging base/cable to
charge the headset, or could be dangerous.
e Do not attempt to force open the built-in battery as this
could damage the headset.
e |f left unused, a fully charged headset will loose its power
automatically. It is recommended to charge the headset
every three months.
e Do not leave the headset in a too hot or too cold condition
(best between 15°C and 25°C ) which may affect the
headset's operations.
e Do not dispose of the headset into a fire and water.
Turning on the Headset
In OFF MODE, press and hold MFB until you
hear a short beep and the indicator light flashes
blue , then the headset will enter into STANDBY
MODE.
Turning off the Headset
In ON MODE, press and hold MFB until you hear
a short beep and the indicator light turns off,
then the headset will enter into OFF MODE.
Pairing Your Headset with a
Bluetooth Mobile Phone
1.Ensure the headset is off.
2.Press and hold MFB until the indicator light
flashes blue and red alternately as PAIRING
MODE.
3.Activate the bluetooth function on the phone,
search bluetooth devices (See the user guide
of your phone for instructions).
4.Select headset from the found
devices list of the phone.
5.Enter the passkey “0000”, confirm to pair the
headset with your phone. The headset enters
into the STANDBY MODE(If the pairing
cannot be completed within 5 minutes after
the PAIRING MODE has been activated, the
headset will enter into the STANDBY MODE.
Repeat above steps to do the pairing again).
6.Ensure the distance between your headset
and phone is within 10 meters, and without
any obstacles. You can use the headset
freely.
7.1f the headset had paired with your phone but
disconnected, it will paired automatically
again when turns on within operation range.
Answering/Ending a Call
Press MFB once
Rejecting a Call
Press and hold MFB for 2 seconds
Voice Dialing
In STANDBY MODE, press MFB once. Say the
voice tag as soon as you hear the short
beep(ensure your phone supports voice
dialing function, and you have recorded the
voice tag into your phone.)
Last Number Redialing
Press MFB twice
Disconnecting
To disconnect the paired headset from your phone,
please turn off the headset or disconnect the
headset from the Bluetooth menu of your phone.
Additional Statements
* Charge the headset under any status to a
reset.
e The headset will turn off automatically if it
can not be paired with any devices within 20
minutes.
eThe headset will beep when operates
successfully and this maybe too low to hear.
«The above operations may vary due to
difrerent devices.
e Manufacturer reserves the right to final
explanation of all the above statements.