BERNINA Embroidery Software V8
Update / Upgrade Activation
1.
Enter your license Key of your
BERNINA Embroidery
Software 8 (DesignerPlus)
Update / Upgrade
2.
Complete the Register and
Activate Product form and
press OK.
3.
Follow the instructions
Note:
Do not attach your USBDongle (V5/V6/V7), before you
get the information.
Do not close the „Register and
Activate Product“ Window 1.,
during activation process 2.
If activation procedure has
completed, the following message
will be shown.
Note:
The activation process can take
several seconds, up to one minute
and depends about the speed of
your internet connection and PC
hardware.
">
