Panasonic TX32LXD80 User manual

Operating Instructions
LCD Television
Model No.
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
U.K. Standard
English
TX-32LXD80
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Receives digital terrestrial broadcastings using an integrated DVB (Digital Video
Broadcasting) tuner
Display DVB programmes with TV Guide (p. 18) / Timer Programming (p. 38) /
Register and instantly call up favourite programmes with Prole Edit (p. 30)
Sharp pictures with HDMI connection
Enjoy high-denition digital picture and high-quality sound by using an HDMI cable (p. 50)
Links up and controls the connected equipment with “Q-Link” and “VIERA Link”
Easy recording and playback, create home theatre without complicated settings, etc. (p. 42)
Supports Audio Description signal (p. 13 and p. 24)
This function can add an additional audio track to describe events on-screen and aids
understanding and enjoyment, particularly for visually-impaired viewers.
Digital Switchover
Starting in late 2007 and ending in 2012, TV services in the UK will go completely
digital, TV region by TV region.
If you have any questions, please call Digital UK on 08456 50 50 50
or visit www.digitaluk.co.uk
Digital Switchover will cover a period of several weeks. When it starts you will lose
all Analogue TV programmes and some Digital TV programmes will be missing.
You will need to retune your TV each time this happens to recover your digital
programmes.
To retune your TV “Auto Setup” in “Tuning Menu” (p. 32 and p.33)
Cable or Satellite users should still retune the TV to continue to receive Freeview
services via their aerial. (Your Analogue programme for viewing Cable or Satellite
services will change to a new position.)
•
2
•
Due to the digital reception technologies involved, quality of the DTV signals may be relatively low
in some cases, despite good reception of analogue programmes.
8
8,000:1 Dynamic Contrast
A wide contrast ratio will deliver pictures with
a deep black level and a brighter white level
for greater image depth.
24p Movie Playback
Can support 1080p, 24 frames per second
source materials.
60,000 hours LCD Display Lifetime
The LCD display panel used in the 2008
VIERA TV range is rated for up to 60,000
hours.
This measurement is based on the time taken for
the brightness of the panel to reduce to half of it’s
maximum level.
The time taken to reach this level may vary depending
on the image content and the environment where the
TV is used.
Malfunctions are not taken into account.
Quick Start Guide
Accessories / Options ········· 6
Identifying Controls ·············· 7
Basic Connection ·················· 8
Auto Setup······························ 10
••
••
Enjoy your TV!
Basic Features
••
••
•
•
••
••
••
••
•
•
FAQs, etc.
••
••
••
•
Watching TV ·············································· 12
Viewing Teletext ········································ 15
Using TV Guide ········································· 18
Watching VCR, DVD and Satellites ·········· 20
Viewing
V-AUDIO
Utilises Panasonic’s advanced Digital
Amplication technology.
Safety Precautions ······································ 4
(Warning / Caution)
Notes ··························································· 5
Maintenance················································ 5
Quick Start Guide
IPS-Alpha Panel
IPS-Alpha Panel is one of LCD
panels, which offers 178-degree
viewing angle. This delivers beautiful
images regardless of the viewing
angle.
Contents
Be Sure to Read
•
••
Advanced Features
FAQs, etc.
Technical Information ································ 50
FAQs ························································· 53
On screen messages ································ 55
Glossary ···················································· 57
Licence ······················································ 57
Index ························································· 58
Specications ············································ 59
Advanced
How to Use Menu Functions ····················· 22
(picture, sound quality, etc.)
DVB Settings (DVB) ·································· 28
(pay-TV, software update)
Editing Programmes·································· 30
Tuning Programmes ·································· 32
Restore Settings········································ 34
Owner ID ··················································· 35
Input Labels··············································· 36
Displaying PC Screen on TV····················· 37
Recording Controls ··································· 38
Viewing from SD Card (Photos) ················ 40
Link Functions ·········································· 42
(Q-Link / VIERA Link)
External Equipment ··································· 48
3
Safety Precautions
Warning & Caution
Handling the mains plug
and lead
•
Ensure that the mains plug is easily
accessible at all times. The On / Off switch
on this model does not fully disconnect the
TV from the mains supply. Remove the
mains plug from the wall socket when the
TV is not used for a prolonged period of
time.
Do not expose to direct
sunlight and other
sources of heat
•
Power source
•
This TV is designed to operate on 220-240 V, 50 Hz AC.
Do not remove the cover
•
Do not remove the rear cover as live parts are accessible when it
is removed. There are no user serviceable parts inside.
Do not expose your ears to excessive
volume from the headphones
•
Irreversible damage can be caused.
Avoid exposing the TV to direct sunlight
and other sources of heat. To prevent re
never place any type of candle or naked
ame on top or near the TV.
AC 220-240 V
50 Hz
Do not place the TV on
sloped or unstable
surfaces
•
The TV may fall off or tip over.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is tted in this
mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark ASA or the BSI mark
on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic dealer.
If the tted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock if the
cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Blue: Neutral Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
Example 1
markings identifying the terminals in your mains plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug which is
marked with the letter L or coloured RED.
Under no circumstances should either of these wires be connected to the Earth terminal of the
three pin mains plug, marked with the letter E or the earth symbol .
How to replace the fuse.
Example 2
For plug type shown in example 1:
Lift out the removable fuse compartment with a screwdriver and replace the fuse, then ret
securely into the mains plug (see example 1).
For plug type shown in example 2:
Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse,
then press the fuse cover down securely (see example 2).
4
Notes
Auto power standby function
Do not expose to rain
or excessive moisture
•
To prevent damage which might
result in electric shock or re, do not
expose this TV to rain or excessive
moisture.
This TV must not be exposed to
dripping or splashing water and
objects lled with liquid, such as
vases, must not be placed on top of
or above the TV.
•
If no signal is received and no operation is performed in Analogue TV
mode for 30 minutes, the TV will automatically go to standby mode.
Keep the TV away from these types of equipment
•
Electronic equipment
•
Equipment with an infrared sensor
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
This TV also emits infrared rays (this may affect operation of other
equipment).
Transport only in upright position
Do not block the rear
ventilation openings
•
Ventilation should not be impeded
by covering the ventilation openings
with items such as newspapers,
tablecloths and curtains.
Allow sufcient space
around the TV for
radiated heat
Minimum distance
10
10
•
•
10
•
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with
clean water or diluted neutral detergent (1 part detergent to 100 parts water).
Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
10
(cm)
When using the pedestal, keep the
space between the bottom of the
TV and the oor surface.
In case of using Wall-hanging
bracket, follow the manual of it.
Use only the
dedicated pedestals /
mounting equipment
•
Maintenance
Using an unapproved pedestal or
other xtures may make the TV
unstable, risking injury. Be sure to
ask your local Panasonic dealer to
perform setup.
Use approved pedestals / mounts
(p. 6).
•
•
The surface of the display panel has been specially treated and may be
easily damaged.
Do not tap or scratch the surface with your ngernail or other hard object.
Take care not to subject the surface to insect repellent, solvent, thinner,
or other volatile substances (this may degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using the soft dry cloth provided.
Major contamination: Dampen a soft cloth with clean water or water
containing a small amount of neutral detergent. Then, wring the cloth and
wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
•
•
•
Take care not to subject the TV’s surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
Take care not to subject surfaces to insect repellent, solvent, thinner, or
other volatile substances (this may deteriorate the surface by peeling
the paint).
Do not allow the cabinet and pedestal to make contact with a rubber or
PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and
dust may lead to re or electrical shock.)
Do not allow children
to handle SD Card
•
As with a small object, SD Card
can be swallowed by young
children. Please remove SD Card
immediately after use.
5
Accessories / Options
Standard accessories
Check that you have the accessories and items shown
Remote Control
•
Batteries for the
Remote Control (2)
N2QAYB000239
•
R6 (UM3)
Cleaning cloth
Clamper
•
TMM8E18048
•
TXFPE01RLTB
TV
Operating Instructions
Pan European Guarantee Card
•
1 Year Guarantee Registration
CRM (Customer Relationship Management)
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Installing remote’s batteries
Using the clamper
Pull
open
1
Hook
Close
2
Rear of the TV
To loosen:
To tighten:
Note the correct
polarity (+ or -)
Caution
•
••
••
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive
heat such as sunshine, re or the like.
Optional accessories
Wall-hanging bracket
•
TY-WK32LR2W
Keep
the knob
pressed
•
••
Do not bundle the RF cable and mains lead together (could cause
distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly
manual to x cables.
Some items may not be available locally.
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
How to remove the Pedestal
WARNING!
6
•
•
•
•
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount
your unit will void your warranty.
Always be sure to ask a qualied technician to carry out set-up.
Incorrect tting may cause equipment to fall, resulting in injury and
product damage.
Do not mount the unit directly below ceiling lights (such as spotlights,
oodlights or halogen lights) which typically give off high heat. Doing
so may warp or damage plastic cabinet parts.
Take care when xing wall brackets to the wall. Always ensure that there
are no electrical cables or pipes in the wall before hanging bracket.
Remove four screws.
TX-32LXD80
•
Rear of the TV
Identifying Controls
TV
Function select
/ Contrast / Brightness / Colour / Sharpness /
•Volume
Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 32)
Headphones
jack (p. 48)
SD Card slot (p. 41)
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Remote control signal receiver
•
Senses brightness to adjust picture quality in “Eco” mode
in Picture Menu (p. 24)
Changes the
input mode
Timer LED
•
•
•
Mains power On / Off switch
•
Active for Timer Programming or Standby for Direct TV Recording :orange (ash)
Timer Programming On :orange
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
Power LED
HDMI3 terminal
(p. 48)
AV3 terminals
(p. 48)
Switch On to turn on the TV
•
••
•Guide
•OK
••
Main Menu
•
Teletext
•Subtitles
•Numeric buttons
••
Programme Information
•Programme Up / Down
•
Switches TV On or Off standby
Aspect (p. 14)
Changes aspect ratio from Aspect Selection list
Also possible by pressing this button
repeatedly until you reach the desired aspect
VIERA Link Menu (p. 45)
Press to access VIERA Link Menu directly
INPUT
OPTION SD CARD
EXIT
(p. 18)
Displays TV Guide
••
SD Card
•Option Menu
•
Exit
•Cursor buttons
•Return
•Coloured buttons
•
Hold
••
TV - switches DVB / Analogue mode (p. 12)
AV - switches to AV input mode from Input
Selection list (p. 20)
(p. 40)
Switches to SD Card viewing mode
(p. 13)
Easy setting for viewing and sound
options
Returns to the normal viewing screen
Conrms selections and choices
Press after selecting programme positions
to quickly change programme
RETURN
Identifying Controls
Accessories / Options
Input mode selection
Standby On / Off switch
••
Remote Control
Quick Start Guide
C.A.T.S. (Contrast Automatic Tracking System) sensor
Makes selections and adjustments
Returns to the previous menu
(p. 22)
Press to access VIERA Link, Picture,
Sound and Setup Menus
Used for the selection, navigation and
operation of various functions
(p. 15)
Switches to teletext mode
Freeze / unfreeze picture (p. 12)
Holds the current teletext page (teletext
mode) (p. 17)
(p. 12)
Displays subtitles
Index (p. 17)
Changes programme and teletext pages
When in Standby mode, switches TV On
•
Sound Mute
•Volume Up / Down
Returns to the teletext index page
(teletext mode)
(p. 13)
Displays programme information
Switches sound mute On or Off
Selects programme in sequence
VCR / DVD Panasonic equipment
operations (p. 21)
Direct TV Recording (p. 43 and p. 45)
•
MULTI WINDOW
Normalize (p. 23)
•
Resets picture and sound settings to their
default levels
DIRECT TV REC
Records programme immediately in
DVD Recorder / VCR with Q-Link or
VIERA Link connection
N
Surround (p. 24)
•
Switches Surround sound
7
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
TV only
TV, DVD Recorder or VCR
Rear of the TV
Aerial
Rear of the TV
Aerial
AC 220-240 V
50 Hz
Mains lead
AC 220-240 V
50 Hz
Mains lead
RF cable
PC
COMPONENT
AUDIO
OUT
AUDIO
IN Y
AV1
RGB
VIDEO
PC
AV2
COMPONENT
RGB
VIDEO
S VIDEO
AUDIO
OUT
AV 1
RGB
VIDEO
AV 2
RGB
VIDEO
S VIDEO
AUDIO
IN Y
L
L
PB
L
L
PB
R
R
PR
R
R
PR
RF cable
SCART cable
(fully wired)
RF OUT
DVD Recorder or VCR
RF IN
8
••
•
••
•
RF cable
Note
Connect to AV2 for a DVD Recorder / VCR supporting Q-Link (p. 43).
Connect to AV1 for a Satellite receiver.
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using
HDMI cable (p. 48).
Q-Link connection p. 42
VIERA Link connection p. 42
Read the manual of the equipment too.
Example 3
Connecting DVD Recorder / VCR and Satellite receiver
TV, DVD Recorder / VCR and Satellite
Rear of the TV
Aerial
Mains lead
Quick Start Guide
AC 220-240 V
50 Hz
•
Basic Connection
PC
COMPONENT
AUDIO
OUT
AV1
RGB
VIDEO
AV2
RGB
VIDEO
S VIDEO
AUDIO
IN Y
L
L
PB
R
R
PR
RF cable
SCART cable
(fully wired)
RF OUT
Fully wired HDMI
compliant cable
DVD Recorder
or VCR
RF IN
RF cable
SCART cable
(fully wired)
RF OUT
RF cable
RF IN
Satellite receiver
9
Auto Setup
Search and store TV programmes automatically.
These steps are not necessary if the setup has been completed by your local dealer.
1
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
•
Auto Setup - Digital and Analogue
Digital Scan
Analogue Scan
This will take about 6 minutes.
Channel
Service Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
29
33
BBC1
Free TV: 4
Pay TV: -
INPUT
21
21
68
68
•
Type
Quality
Free TV
10
Free TV
10
Free TV
10
Free TV
10
Analogue
Analogue
Data: Analogue: 2
Radio: Searching
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
Auto Setup will start to search for
TV programmes and store them in
the numbered order as specied
by the broadcasters.
EXIT
OPTION SD CARD
EXIT
Sending Preset Data
Please wait!
0%
RETURN
100%
•
Remote control unavailable
2
If Q-Link, or similar technology
(p. 43), compatible recorder is
connected, analogue programme
information is automatically
downloaded to the recorder.
(Digital programme information is
not downloaded.)
When inputting Owner ID
Owner ID
Please enter new PIN
PIN
EXIT
0
* * * *
9
PIN entry
RETURN
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
For detailed procedures
“Owner ID” (p. 35)
Make a note of the PIN number
in case you forget it.
•
•
When inputting Owner ID later
EXIT
3
TV
•
If you input the ID later
“Owner ID” (p. 35)
Select the picture setting
Please select your viewing environment.
Home
Shop
•
“Shop” and “Home” are equal
to “Dynamic” and “Normal”
respectively - “Viewing Mode” in
“Picture Menu” (p. 24)
select
set
Auto Setup is now complete and your TV is ready for viewing.
•
•
10
To check programme list
at-a-glance
“Using TV Guide” (p. 18)
To edit programmes
“Editing Programmes” (p. 30)
Many features available on this TV can be accessed via the On Screen Display
menu.
How to use remote control
MENU
Open the main menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
RETURN
EXIT
Exit the menu system and return to the normal viewing screen
Auto Setup
Return to the previous menu
•
Using the
On Screen
Displays
Quick Start Guide
Move the cursor / select the menu
ON SCREEN HELP Instructions box
(example: Owner ID)
Owner ID
Please enter new PIN
PIN
EXIT
0
* * * *
9
PIN entry
RETURN
On-screen operation
guide will help you.
••
••
Note
If tuning has failed “Auto Setup” (p. 33)
If downloading has failed “Q-Link Download” (p. 25)
To initialize all settings “Shipping Condition” (p. 34)
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
11
Watching TV
INPUT
1
Turn power on
2
Select DVB (Digital Video Broadcasting) or
Analogue mode
(Press for about 1 second)
•
OPTION SD CARD
Mains power On / Off switch should be On. (p. 7)
EXIT
RETURN
•
Also possible to select the mode using the
TV button on the side panel of the TV. (p. 7)
1 BBC ONE WALES
Coronation Street
20 : 00 ~ 20 : 55
23:35
Now
Profile 1
Change category
For info press
Information banner appears
whenever you select a
programme
For details p. 13
•
3
Select a programme
up
or
•
To select the two or three-digit
programme number, e.g. 39
down
Volume
(in a short time)
Select a programme using Information banner (p. 13)
Possible to conrm the programme name before selecting programmes.
Display Information banner
if it is not displayed
While the banner is displayed,
select the programme
select programme
DIRECT TV REC
•
TV
•
watch
Possible to set display
timeout in “Banner Display
Timeout” (p. 25).
Select a programme using TV Guide (p. 18)
Note
Possible to conrm the TV Guide (EPG) before selecting programmes.
To watch pay-TV
p. 29
Display
TV Guide
Select the event
now on the air
GUIDE
select
access
Select “View”
Eastender
19:30- 20:00
View
Timer Programming
select
watch
Other useful functions
12
Hold
Freeze / unfreeze picture
Display
subtitles
Display / hide subtitles (if available)
•
To change the language for DVB (if available)
“Preferred Subtitles” (p. 25)
Other useful functions
Display Information banner
•
Also appears when changing a programme
Event
Programme Programme type
(if it is Radio or Data service) Current time
1 BBC ONE WALES
Radio
23:35
Example:
Coronation Street
20 : 00 ~ 20 : 55
Mute
Encrypted
Profile 1
Change category
For info press
Now
AD
Category
Subtitles TXT Multi Audio
45
DVB: Event Start / Finish time
Analogue: Programme status
Features available / Message meanings
Subtitles
Subtitle service available
Bad signal
Poor TV signal quality
TXT
Teletext service available
Encrypted
Scrambled programme
Multi Audio
Multiple audio available
AD
Audio Description service available
This function can aid visually-impaired
viewers by adding an additional audio
track to describe events on-screen.
For settings p. 24
Stereo, Mono
Audio mode
•
•
1 - 90
Off Timer remaining time
For settings p. 14
•
To change the category
blue
To watch the programme
listed in the banner
EXIT
To hide
To set display timeout
Information on the next event
“Banner Display Timeout” (p. 25)
(DVB mode)
Extra information
(press again to hide the banner)
(DVB mode)
“AD”, “Subtitles”, “TXT”, “Multi Audio” indications are displayed Example:
as available on particular programmes, but may not be
available for all individual programmes being broadcast.
[AD]
Display the extra information to conrm availability of these
functions.
1 BBC ONE WALES
Coronation Street
20 : 00 ~ 20 : 55
Check or change the current
programme status instantly
OPTION
•
23:35
Now
Watching TV
•
•
•
To conrm another tuned
programme name
•
•
•
•
•
•
Viewing
Display
Information
banner
Mute
Sound mute On
All DVB Services
Change category
Exit info
AD
To change
change
select
Display the
selectable
settings for
the current
programme
Multi Audio (DVB mode)
Allows you to select between alternative
language for sound tracks (if available)
Volume Correction
Adjusts volume of individual programme or
input mode
Subtitle Language (DVB mode)
Allows you to select the language in which
subtitles should appear (if available)
Audio Description (DVB mode)
Select “On” if the programme has Audio
Description service, then you will hear an
additional audio track to describe events
on-screen
NICAM (Analogue mode)
Sound Menu (p. 24)
•
Note
Also possible to change the settings in Menu list (p. 24 and p. 25).
13
Watching TV
Other useful functions
Turn the TV off automatically after a xed period
Display the
menu
MENU
Select “Setup”
Select “Off Timer” and set the time
access
Main Menu
VIERA Link
Picture
Off Timer
Sound
select
Setup
••
•
Setup Menu
Timer Programming
DVB Profile Edit
DVB Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Power on Preference
1/3
set
select
Off
TV
To cancel Set to “Off” or turn the TV off.
To display the remaining time Information banner (p. 13)
When the remaining time is within 3 minutes, the remaining time will ash on screen.
Change the aspect ratio
Aspect Selection
Enjoy viewing the picture at its optimum size and aspect.
Display Aspect
Selection list
Auto
16:9
14:9
4:3
Zoom1
Zoom2
Zoom3
Select
While the list is displayed,
select the mode
Change
EXIT
RETURN
Aspect
Selection list
store
select
•
To change the mode using the ASPECT button only
(Press repeatedly until you reach the desired mode)
Auto
16:9
The best ratio is chosen
and the picture expanded
to ll the screen.
For details p. 50
14:9
Change
aspect
ratio
Directly displays the
image at “16:9” without
distortion (anamorphic).
4:3
Displays the
image at the standard
“14:9” without distortion.
Zoom1
Displays the image at the
standard “4:3” without
distortion.
Zoom2
Displays a “16:9” letterbox
or “4:3” image without
distortion.
Displays a “16:9” letterbox
(anamorphic) image
full-screen without
distortion.
Zoom3
Displays a “2.35:1” letterbox (anamorphic)
image full-screen without distortion. At “16:9”,
displays the image at its maximum
(with slight enlargement).
••
••
14
Note
Only “16:9” and “4:3” are available in PC mode.
Not available when Subtitle is active in DVB mode.
Not available in Analogue teletext mode.
Aspect mode can be memorized separately for SD (Standard denition) and HD (High
denition) signals.
Viewing Teletext
You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster)
DVB mode
•
DVB teletext services
DVB teletext services differ greatly from analogue teletext.
When you switch to a DVB teletext service, the images
you see can contain graphics and text, laid out and
controlled in a manner decided by the broadcaster.
You can check if the programme
has teletext service.
1 BBC ONE WALES
1
If in Analogue mode
Select DVB
Information
banner
(p. 13)
Coronation Street
20 : 00 ~ 20 : 55
23:35
Now
Profile 1
Change category
For info press
TXT
Displayed if programme has
teletext service
INPUT
OPTION SD CARD
EXIT
2
Switch to Teletext
3
How to use
17:51 28 Feb
••
In all cases, it is possible to navigate the pages using buttons on the
remote control, but because the commands available must apply to all
manufacturers of DVB equipment, some on screen commands may
not correspond exactly to the remote control buttons.
For example:
Viewing
RETURN
When “select” or “go” is displayed
When “”, “”, “”, “” symbol is displayed
When the key words are displayed on colour bar
red green yellow blue
Viewing Teletext
Watching TV
•
•
•
•
•
When options with numbers are displayed
When “i” is displayed
(information)
To return to TV
MULTI WINDOW
DIRECT TV REC
•
TV
•
Note
As soon as you switch to a DVB programme with links to a teletext service,
software is downloaded in the background to enable the teletext function.
This means that when switching to a DVB programme, you should wait for
approximately 5 seconds before pressing the TEXT button - this will allow
the software to download. If you press the TEXT button before download is
complete, there will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will nd there is a short delay when
moving between pages while the page downloads. There is often a prompt
shown somewhere on the page (for example “Loading”) to let you know that
this is happening.
15
Viewing Teletext
Analogue mode
What is FASTEXT mode (default)?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 17)
To change mode
INPUT
OPTION SD CARD
“Teletext” in Setup Menu (p. 25)
1
If in DVB mode
Select Analogue
EXIT
RETURN
2
Switch to Teletext
3
Select the page
•
Sub page number
<< 01 02 03 04 05 06 07
Current
Displays the
page
index page
number
(content varies
depending on the
broadcasters)
>>
17:51 28 Feb
Time / date
TELETEXT
INFORMATION
Colour bar
up
or
or
down
red
green yellow blue
(Corresponds to the colour bar)
As the blue bar is displayed
To adjust contrast
MENU
(Press twice)
EXIT
To return to TV
DIRECT TV REC
TV
Reveal
hidden
data
Reveal hidden words e.g. quiz page answers
Re-hide
MENU
red
red
(TOP)
FULL /
TOP /
BOTTOM
green
(Expand the TOP half)
16
(BOTTOM)
MENU
(Expand the BOTTOM half)
Normal (FULL)
Stop automatic updating
HOLD
(If you wish to hold the current page without updating)
To resume
Return to the main index page
INDEX
View subtitles
•
Subtitles
View in
multi
window
Factory setting is “P888” (subtitle service) on blue button (List mode).
Watch TV and Teletext in two windows at once
•
•
Operations can be made only in Teletext screen.
Each time pressed: Teletext
TV and Teletext
TV
(List mode only)
Store frequently viewed pages in the colour bar
colour button
To change stored pages
If you wish to use
Subtitles, do not
change number on
blue button.
The number changes to white.
Enter new page number
•
Store
frequently
viewed
pages
•
press
and
hold
Viewing Teletext
press
and
hold
Colour button you
want to change
View sub page (Only when teletext is more than one page)
Appears at top of
the screen
View sub
page
Viewing
As page is
displayed Corresponding
To view specic sub page
MENU
Enter the
4-digit number
blue
example: P6
•
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
View the TV picture while searching for a teletext page
Watch
TV while
waiting
for update
Teletext automatically updates itself when new information becomes available.
Changes to TV screen temporarily
P108
MENU
yellow
•
Appears
when
updating is
completed
yellow
View the
updated
page
(You cannot change the programme.)
The news page provides a function that indicates arrival of latest news (“News Flash”).
17
Using TV Guide
TV GuideElectronic Programme Guide (EPG) provides an on-screen listing of the programmes
currently broadcast and the forthcoming broadcasts over the next seven days (depending on the
broadcasters).
••
••
This TV supports GUIDE Plus+ system.
The Gemstar branding partner will supply the rating informations in the event information and the recommended
group in the Prog.Type list.
Analogue programmes will be listed after DVB programmes. “D” means DVB programme and “A” means Analogue programme.
When this TV is turned on for the rst time, or the TV is switched off for more than a week, it may take some
time before the TV Guide is completely shown.
GUIDE
View TV Guide (landscape or portrait)
View “Portrait” to see one programme at a time
View “Landscape” to see many programmes
INPUT
Example:
TV Guide date
Logo of the Gemstar
branding partner
Event
OPTION SD CARD
TV Guide: Landscape
EXIT
Current date
and time
Wed 24/10/2007
10:46
All Types
Wed 24th
20:00 - 20:30 DIY SOS : We open in the Battersbys
Time: 19:30
20:00
20:30
D 1 BBC ONE
Eastender
DIY SOS
The Bill
TV Guide time
Advertisement
RETURN
Programme
D 7 BBC THR
Hot Wars
D 14 E4
Emmerdal.
D 70 CBBC Cha
10 O’ clock News BBC
D 72 Cartoon
Panorama
D 105 BBCi
I’ m A Celebrity
D 719 BBC Radi
Rugby
-24 Hr
21:00
Red Cap
Horiday Program
Coronation Street
The Bill
Pepsi Char.
Good bye
Sex And The City
Terminator
Pop Idol
News
15 To 1
Select channel
Change display mode
EXIT
Select programme
Timer Programming
RETURN
(TV Guide start page)
All Services
The Bill
Info
Select Advert
Page up
Page down
+24 Hr
Prog.Type
Category
Landscape (Displays by programme)
Example:
To change the layout
TV Guide: Portrait
Wed 24/10/2007
10:46
GUIDE
(Landscape / Portrait)
To the previous day
(DVB mode)
All Types
Wed 24th
D 1 BBC O
D 7 BBC T
19:30~20:00 Eastender
20:00~21:00
DIY SOS
21:00~22:00
The Bill
21:00~22:00
Red Cap
22:30~23:00
Live junction
23:00~23:30
POP 100
23:00~00:00
Rugby
Select programme
Change display mode
EXIT
Select channel
Timer Programming
RETURN
-24 Hr
red
+24 Hr
D
All Services
14 E4
D
70 CBBC
Info
Select Advert
Page up
Page down
Prog.Type
Category
Portrait (Displays by time)
To the next day
(DVB mode)
green
To view a
TV
To return to TV
EXIT
programme list
of the selected
type
(DVB mode)
yellow
To view a
programme list
of the selected
category
blue
Prog. Type
All Types
All Types
Movie
News
(Type list)
.
.
.
.
.
.
.
Categor y
All Service s
All Services
All DVB Services
All Analogue Services
Free Services
TV and Data Services
Profile 1
Profile 2
Profile 3
Profile 4
select type
view
(Category list)
Only Analogue TV programmes are
listed
select
category
view
18
To list favourite programmes
p. 30
Other useful functions (Operate after viewing TV Guide)
Watch the
programme
Select the current
Select “View”
event or programme
select
Eastender
19:30- 20:00
select
access
Timer Programming
(TV screen)
watch
View details
Select the event
View details
of the event
(DVB mode)
View
To return to
TV Guide: Landscape
Wed 24/10/2007
10:46
the start page
Wednesday, 24 October 2007
DIY SOS
BBC ONE
20:00 - 20:30, 30 min.
select
Details
EXIT
Timer Programming
Return to List
RETURN
Select the event to output to external recorder
select
Timer Programming
set
D ate
Start
End
min.
D
1 BBC1
<TIMER>
6/8 FR
1 8: 00
2 0: 00
1 20
Off
D
3 I TV 1
Freshly Squeezed Extra
7/8 SA
2 1 :3 0
2 2 :3 0
60
Off
-- -
--/--
--:--
--:--
---
---
-- -
--/--
--:--
--:--
---
---
-- -
--/--
--:--
--:--
---
Select timer
EXIT
---
1/1
Edit timer
0
Page up
Info
9
Page down
RETURN
Delete
Timer
Programming
Timer LED will turn on if Timer
Programming is set.
Wed 05/08/04 18:50
P os . Na me
Timer off
•
(Timer Programming screen)
•
Timer LED
Orange Timer LED
(Blinking during timer active)
To check / change / cancel a
Note
Timer Programming event
When recording programmes, you must make
“Timer Programming” (p. 39)
the proper settings on the recorder connected to the TV.
RETURN
If a compatible recorder with Q-Link or similar
To return to TV Guide
technologies is connected to the TV (p. 45) and the
“Link Settings” (p. 27) are completed, no setting of the recorder is required.
Also read the manual of the recorder.
If you select the current programme, the con rmation screen asking whether watching or recording it will
appear. Select “Timer Programming” to record from the time you nish the Timer Programming setting.
“Guide” is
“S/P” is displayed if the
select displayed if the timer is set from the
Event
recording
(Timer
programming
according to
the TV Guide
signal)
timer is set from TV Guide and the event
the TV Guide
is a Split Programme
Timer Programming
set
Timer LED will turn on if
Timer Programming is set.
Wed 05/08/04 18:50
P os . Na me
D ate
Start
End
min.
D
1 BBC1
<TIMER>
6/8 FR
1 8: 00
2 0: 00
1 20
D
1 BB C1
Holiday News
7/8 SA
21:30
22:30
60
Off
--/-7/8
SA
2 --:-2 :3 0
2 --:-3 :3 0
6---0
--Off
-- -
--/--
--:--
--:--
---
---
-- -
--/--
--:--
--:--
---
---
Off
Guide
D --3- I TV1
F r e s h ly S q u e e z e d E x tr a
SP
Select timer
EXIT
Edit timer
1/1
0
9
Info
Page up
Page down
RETURN
Delete
Timer off
•
Timer LED
Orange Timer LED
(Blinking during timer active)
Using TV Guide
Select the event to output to external recorder
•
Event recording is a timer programme controlled by information from the TV Guide.
Programme start and end times may be changed by broadcasters and sent to the TV for
timer programme to follow the change.
Split Programme is a programme which is interrupted by one or more events.
Both of the above are subject to signals being sent by broadcasters.
Viewing
•
(Timer Programming screen)
To check / change / cancel an Event recording event
•
To return to TV Guide
•
“Timer Programming” (p. 39)
If you edit the Event recording after setting to record, it will no longer be performed as Event
recording. The recording will be performed according to the time setting in Timer Programming.
RETURN
Note
Whilst making Split Programme recording, it is not possible to record any events between sections.
Enter your postcode when using this function for the rst time
“Postcode” in “GUIDE Plus+ Settings” (p. 27)
If you have already entered your postcode in Owner ID (p. 12), you do not have to enter again.
If you enter an incorrect postcode for your area, or no postcodes are entered, advertisement
may not be displayed correctly.
To change advertisements
View
advertisement
Display advertisement information
OPTION
•
•
Note
•
•
To display the latest advertisement, you
will need to update the information.
To update the information continuously, the
TV should be left in Standby mode at night.
To return to TV Guide
RETURN
OPTION
or
Some advertisements are for future programmes.
In this case it is possible to use the Event recording function see above
The information from GUIDE Plus+ system will not be lost even if turned Off with Mains power On / Off switch.
19
Watching VCR, DVD and Satellites
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment p. 8 and p. 9
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
•
1
INPUT
OPTION SD CARD
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
•
•
•
2
Display the Input select menu
3
Select the input mode connected to the equipment
Input Selection
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
•
•
MULTI WINDOW
DIRECT TV REC
To return to TV
20
Receives input signals automatically when playback starts or
satellite receiver is switched on
Input signals are automatically identied by the SCART (pin 8)
terminal.
This function is also available for HDMI connections (p. 48).
If input mode is not switched automatically
Perform
and
Dependant on the setup of the equipment
EXIT
RETURN
Turn the TV on
4
watch
select
You can also select the input using the AV button on the remote
control or the side panel of the TV.
Press the button repeatedly until the desired input is selected.
You can label or skip each input mode “Input Labels” (p. 36)
Skipped inputs will not be displayed when AV button is pressed.
View
Displays the selected mode
••
Note
If the external equipment has an aspect adjustment function, set to “16:9”.
For details, see the manual of the equipment or ask your local dealer.
Screen display
Terminal
AV1
AV2
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
AV1
AV1-RGB
AV2
AV2-S-Video
AV2-RGB
AV3
AV3-S-Video
COMPONENT
PC
HDMI1
HDMI2
HDMI3
Manual input
default
setting in
“Input Labels”
(
)
Auto input
EC mode or
VIERA Link
(
)
EC/AV2
EC/AV1
EC/AV2-S-Video
EC/AV1-RGB EC/AV2-RGB
•
EC/HDMI1
Applicable for
EC mode and
VIERA Link
•
EC/HDMI2
Applicable for
VIERA Link
•
EC/HDMI3
Applicable for
VIERA Link
Panasonic equipment connected to the TV can be directly operated with the remote control.
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Programme Up / Down
Select programme
Record
Start recording
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold
during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
“VCR” position
Equipment
VCR
DVD
••
••
Code
10 (default)
11
“DVD” position
Equipment
DVD
Player home theatre
Press
Watching VCR, DVD and Satellites
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
•
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Viewing
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Code
70 (default)
71
Note
Conrm if the remote control works correctly after changing the code.
The codes will be reset to default values if batteries are replaced.
“DVD” means DVD player, DVD recorders and Recorder home theatre.
Some operations may not be possible on some equipment models.
21
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
1
Display the menu
2
Select the menu
MENU
•
Displays the functions that can be set
(varies according to the input signal)
INPUT
OPTION SD CARD
EXIT
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
RETURN
(example: Picture Menu)
3
Select the item
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR
1/2
Dynamic
select
Warm
Off
Off
(example: Picture Menu)
4
MULTI WINDOW
DIRECT TV REC
N
Adjust or select
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR
1/2
Dynamic
change
Warm
Off
Off
(example: Picture Menu)
To return to TV
at any time
EXIT
To return to the
previous screen
RETURN
22
store or access
(Required by
some functions)
Choose from among alternatives
Number and positions of alternatives
Colour Balance
Normal
Changed
Adjust using the slide bar
Sharpness
•
Moved
Tuning Menu
Access
Displays the next screen
Enter characters using alpha/numeric keys
You can input information using alpha/numeric keys.
Set characters
User input
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
select
Store
RETURN
How to Use Menu Functions
(picture, sound quality, etc.)
Go to the next screen
set
To change menu pages
up
To reset the settings
•
•
•
•
Advanced
down
To reset the picture settings only
“Reset to Default” in Picture Menu (p. 24)
To reset the sound settings only
“Reset to Default” in Sound Menu (p. 24)
To reset the picture and sound settings together
N
(Also volume level and aspect mode are reset)
To initialize all settings
“Shipping Condition” in Setup Menu (p. 34)
23
How to Use Menu Functions
Menu list
Menu
Item
VIERA Link
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Controls the connected equipment with VIERA Link function, and enables various
convenient recording, playback, etc. (p. 45 - 47)
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Viewing Mode
Selects four different screen settings (Dynamic / Normal / Cinema / Eco)
Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room
Normal : Recommended for viewing under normal ambient room lighting conditions
Cinema : For watching movies in a darkened room producing a cinema-like picture
Eco
: Adjusts picture settings automatically dependent on ambient lighting conditions
In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance,
Colour Management and 3D-COMB can be adjusted and stored to suit your particular viewing
requirement (e.g., you may require different settings for viewing sports, lms, news etc.)
Set for each input signal
Changes will be stored automatically
Picture
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Balance
Colour Management
P-NR
3D-COMB
Reset to Default
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Sound
Volume Correction
Speaker Distance
to Wall
Preferred Multi Audio
NICAM
HDMI1 / 3 Input
Audio
Description
Menu
Audio Description
Volume
Speakers
Headphones
Reset to Default
24
Adjustments / Configurations (alternatives)
•
•
•
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste
For NTSC signal reception only
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
Not valid on PC signal
Picture Noise Reduction
Automatically reduces unwanted picture noise and icker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
Not valid on PC signal
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to “On” to display sharper and more accurate colours (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, Component, PC, HDMI and SD Card
Press the OK button to reset the present Picture Mode to the default settings
Select two different sound settings (Music / Speech)
In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your
particular sound requirement
Changes to any settings in a mode will affect all signal sources
Sound quality can be improved
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / On)
Provides a dynamic enhancer to simulate improved spatial effects
Switching is also possible by the Surround button on the remote control (p. 7).
Adjusts volume of individual programme or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.
If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.
Selects the preferred language for DVB multi audio (depending on the broadcaster)
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
Analogue mode only
Select to t the input signal (Auto / Digital / Analogue) (p. 50)
Auto
: Automatic detection of digital or analogue sound source
Digital
: HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
HDMI2 terminal is for digital signal only
No setting for HDMI2 available
Useful for visually-impaired viewers (Off / On)
Select “On” to activate the description sound track if available
Adjusts the volume for audio description
Set to “On” to activate the description sound track from TV speakers (Off / On)
Set to “On” to activate the description sound track from headphones (Off / On)
Press the OK button to reset the present Sound Mode to the default settings
Effective to Bass, Treble, Balance, Headphone Volume and Surround
•
•
•
••
•
••
•
••
•
•
•
Menu list
Menu
Item
Timer Programming
DVB Prole Edit
DVB Service List
Analogue Service List
VIERA Link
Records forthcoming programmes (p. 38)
Link Settings
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 43)
Select the connected terminal to the recorder even it is not compatible with Q-Link.
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
Component, PC and HDMI signals cannot be outputted.
GUIDE Plus+
Settings
Setup
Postcode
System
Information
Off Timer
Skips the unwanted DVB programmes (p. 31)
Skips the unwanted Analogue programmes or edits Analogue programmes (p. 31)
Sets to use VIERA Link functions (Off / On) (p. 44)
•
••
Downloads analogue programme information to a Q-Link compatible equipment
connected to the TV
Locks a programme / AV input to prevent access to it (p. 31)
Automatically sets the programmes received in the area (p. 33)
Sets the DVB programmes manually (p. 33)
Sets the Analogue programmes manually (p. 33)
Adds new DVB services (p. 33)
Selects whether to give a notication message when a new DVB service is found (p. 33)
Checks the DVB signal condition (p. 33)
Sets your post code to display advertisements in the GUIDE Plus+ system (p. 18)
Displays the system information of the GUIDE Plus+ system
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext
Analogue teletext display mode (FASTEXT / List) (p. 16)
Preferred Subtitles
Selects the preferred language for DVB subtitles (depending on the broadcaster)
To display subtitles p. 12
Shipping Condition
Owner ID
Common Interface
System Update
Resets all settings, for example, when moving house (p. 34)
Input Labels
Banner Display
Timeout
Software Licence
System Information
•
•
Advanced
Power on Preference
Set to “TV” to view picture from TV tuner.
Set to “AV” to view input from an external equipment connected to a SCART terminal,
e.g. satellite receiver (TV / AV)
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Picture Overscan
How to Use Menu Functions
(picture, sound quality, etc.)
Tuning Menu
Child Lock
Auto Setup
DVB
Manual Tuning
Analogue
Manual Tuning
Add New DVB
Services
New Service
Message
DVB Signal
Condition
Creates list of favourite programmes (p. 30)
•
Q-Link Download
••
Adjustments / Configurations (alternatives)
Inputs the owner ID (p. 35)
Uses include to watch pay-TV (p. 29)
Downloads new software to TV (p. 29)
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
Set to “On” if noise is generated on the edge of the screen.
This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
This function can be memorized separately for SD (Standard denition) and HD (High
denition) signals.
••
•
Labels or skips each input terminal (p. 36)
Sets how long the information banner (p. 13) stays on screen
0 (No display) to 10 sec. in 1-sec. increments
•
Displays the software licence information
Displays the system information of this TV
A different menu will be displayed while PC or SD Card is used. (p. 37 and p. 41)
Only available items can be selected.
25
How to Use Menu Functions
Overview
•
How to operate (p. 22)
Main Menu
VIERA Link
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Access
Start
Recorder
Home Cinema
(p. 45)
Picture
Sound
Setup
The menu of the accessed
equipment
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR
1/2
3D-COMB
Advanced PC Settings
Reset to Default
Only available in NTSC / PAL
Only available in PC
Warm
Off
Off
Picture Menu
Only available in NTSC
Not available in PC
Not available in PC
Dynamic
Advanced PC Settings
2/2
Off
Access
Set
R-Gain
G-Gain
B-Gain
Gamma
Reset to Default
2.2
Set
(p. 37)
(p. 24)
Sound Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
Preferred Multi Audio
1/2
Music
Audio Description Menu
Audio Description
Volume
Speakers
Headphones
Off
2/2
Only available in Analogue
Only available in DVB
Only available in DVB
1/3
Access
Access
Access
Access
Access
Access
Access
Access
Access
Off
TV
Setup Menu
2/3
Teletext
FASTEXT
Preferred Subtitles
English
Shipping Condition
Access
Owner ID
Access
Common Interface
Access
System Update
Access
On
Picture Overscan
Input Labels
Access
Banner Display Timeout 3 seconds
Setup Menu
Software Licence
System Information
3/3
Access
Access
(p. 25)
26
Only available in PC
PC Setup
Off
Auto
Access
Set
Setup Menu
Only available in DVB
Only available in DVB
Only available in Analogue
Off
Off
(p. 24)
(p. 24)
PC Setup
Timer Programming
DVB Profile Edit
DVB Service List
Analogue Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Power on Preference
Off
Over 30cm
English
Sound Menu
NICAM
HDMI1 Input
Audio Description
Reset to Default
Only available in DVB
Only available in Analogue
Only available in DVB
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to Default
VGA
H&V
Set
(p. 37)
Timer Programming
Wed 05/08/04 18:50
Pos. Name
Date
Start
End
min.
D
1 BBC1
< T I ME R>
6/8 FR
1 8: 00
2 0: 00
1 20
Off
D
1 BBC1
Ho l i da y N e ws
7/8 SA
2 1: 30
2 2: 30
60
Off
7/8
SA
--/--
2 --:-2: 30
2 --:-3: 30
6---0
Off
---
-- -
--/--
--:--
--:--
---
---
-- -
--/--
--:--
--:--
---
---
D --3- I T V1
Fr e s h l y Sque e ze d Ex t ra
Guide
S/P
(p. 38)
Profile Editor
All DVB Services
1
7
14
70
72
105
719
720
Profile 1
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
Auto Setup - Digital
Scan
21
68
This will take about 3 minutes.
Channel
Service Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
(p. 30)
Free TV: 4
Pay TV: -
Type
Free TV
Free TV
Free TV
Free TV
Radio: Searching
Data: -
DVB Service List
Analogue Service List
(p. 33)
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
DVB Manual Tuning
Frequency
Signal
Quality
Analogue
Scan
Signal Strength
Position
Service Name
1068
10
Type
New
(p. 31)
Free TV: -
Pay TV: -
Radio: Stopped
Data: -
(p. 33)
(p. 31)
Link Settings
VIERA Link
Q-Link
AV2 out
Q-Link Download
On
AV2
TV
Access
1 BBC1
Manual Tuning
CH33
68
21
(p. 33)
(p. 25)
Child Lock
Change PIN
Child Lock List
Analogue Manual Tuning
Access
(p. 31)
Add New DVB Services
Scan
Analogue Scan
21
68
This will take about 3 minutes.
Channel
Service Name
Only available in DVB
Only available in Analogue
Only available in DVB
Only available in DVB
Only available in DVB
Type
Quality
How to Use Menu Functions
(picture, sound quality, etc.)
1 BBC1
2 *****
3 *****
4
5
6
7
474 MHz
[CH21]
0
21
0
•
70
72
105
719
720
1
7
Quality
10
10
10
10
Tuning Menu
Auto Setup
DVB Manual Tuning
Analogue Manual Tuning
Add New DVB Services
New Service Message
DVB Signal Condition
Access
Access
Access
Access
On
Access
Free TV: -
Pay TV: -
Radio: Searching
Data: -
(p. 33)
(p. 32)
(p. 33)
Advanced
DVB Signal Condition
DVB Programme
[CH70] CBBC Channel
0
10
Signal Quality
0
10
Signal Strength
GUIDE Plus+ Settings
Postcode
System Information
Access
(p. 25)
Owner ID
Please enter new PIN
PIN
Shipping Condition
All tuning data will be erased
Are you sure?
Are you sure?
(p. 34)
* * * *
(p. 35)
Common Interface
Slot 1:
System Update
Module inserted
(p. 29)
Auto Update Search in Standby On
System Update Search Now
Input Labels
(p. 29)
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
DVD
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
(p. 36)
27
DVB Settings (DVB mode)
DVB Settings provide access to various advanced features.
1
If in Analogue mode
Select DVB
INPUT
OPTION SD CARD
EXIT
2
Display the menu
3
Select “Setup”
MENU
RETURN
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
4
TV
To return to TV
EXIT
28
5
Select “Common Interface” or “System Update”
Setup Menu
Teletext
Preferred Subtitles
Shipping Condition
Owner ID
Common Interface
System Update
Picture Overscan
Input Labels
Banner Display Timeout
Set
2/3
access
FASTEXT
English
Access
Access
On
3 seconds
select
The Common Interface Module menu provides access to software contained on Common
Interface (CI) Modules.
This TV receiver works only Pay TV modules complying with CI standard.
Caution
•
•
•
Pay-TV
Turn Off Mains power On / Off switch
whenever inserting or removing the CI
module.
If a view card and a card reader
come as a set, rst insert the card
reader, then insert the view card into the
card reader.
Insert the module in the correct direction.
CI slot
Remove the
cover before
using CI slot.
•
Insert or
remove
straightly and
completely
CI module
Side of the TV
Insert the CI module (optional)
Common Interface
Slot 1:
Module inserted
Follow the on-screen instructions
•
example: select, go
Coloured characters
On-screen operation guide
may not correspond to the
remote control buttons.
red green yellow blue
•
If System Update is performed, the software will be updated (it may change TV
functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.
System
Update
Advanced
Download new software to TV.
For details p. 51
Update
TV’s
software
system
•
Access “Common Interface”
DVB Settings (DVB)
(pay-TV, software update)
•
•
•
Common
Interface
The features that appear on screen are dependent on the contents of the selected CI
module.
Normally pay-TV services will appear without and .
If pay-TV service does not appear, perform and .
For more details, see the manual of the CI module, or check with the broadcaster.
Select “Auto Update Search in Standby” and then set “On” or “Off”
System Update
Auto Update Search in Standby On
System Update Search Now
set
•
select
On: Automatically performs
a search in standby and
downloads an update, if any
software updates are available
To update immediately
Select
“System Update Search Now”
access
select
Searches for an update
(for several mins.) and
displays a corresponding
message if any
Download
•
Download may take
for about 20 mins.
29
Editing Programmes
You can make your favourite programme lists, skip unwanted programmes and control programme
audience, etc.
Select DVB or Analogue
1
INPUT
••
Display the menu
“DVB Prole Edit” and “DVB Service List” are available in DVB mode only.
“Analogue Service List” is available in Analogue mode only.
OPTION SD CARD
2
EXIT
MENU
RETURN
Select “Setup”
3
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
Select “DVB Profile Edit”, “DVB Service List”,
“Analogue Service List” or “Child Lock” and set
4
Setup Menu
To return to TV
EXIT
access
1/3
Timer Programming
DVB Profile Edit
DVB Service List
Analogue Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Access
Access
Access
select
Access
Off
Create your favourite programme list (Prole) from various broadcasters (up to 4: Prole 1 to 4).
The list is added to “Category” in TV Guide (p. 18) and information banner (p. 13) and then
easily accessed.
Select a programme and add it to the list
Profile Editor
All DVB Services
1
7
14
70
72
105
719
720
List
favourite
programmes
DVB
Profile Edit
Profile Editor
To display
another Prole
•
select
To add all
programmes
to the list
1
7
14
70
72
105
719
720
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
yellow
red
Wed 12/05/04 10:46
All DVB Services
To change
the category
Profile 1
1 BBC One Wales
A programme is added
blue
To edit Prole
Select the field of Profile to edit and:
(DVB mode)
•
•
•
To name the Prole
To move the programme
To delete the programme
30
green
Profile 1
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
•
RETURN
red
green
yellow
Select the character
Select the new position
•
Conrm green
To delete all programmes
blue
Note
Programme numbers (known as logical channel numbers) cannot be changed, due to
broadcast restrictions.
Skip
unwanted
programmes
You can hide unwanted services. The deleted services cannot be displayed except in this
function. Use this function to skip unwanted programmes.
“DVB Service List” lists all tuned DVB programmes in DVB mode.
“Analogue Service List” lists all tuned Analogue programmes in Analogue mode.
••
Select a service and add / delete
DVB
Service List
70
72
105
719
720
1
7
Analogue
Service List
•
add / delete
DVB Service List
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
select
To retune each programme
(Manual Tuning)
(p. 33)
red
:add
:delete (skip)
You can change the programme name and programme position for Analogue programmes.
This function is available in Analogue mode.
If a VCR is connected only with the RF cable, edit “VCR”.
••
Select the programme to edit
Programme position
Name
Analogue Service List
1 BBC1
2 *****
3 *****
4
5
6
7
23:35
Coronation Street
CH30
All Analogue Services
Change category
•
Edit
To change the name displayed when selecting programmes
Select
“Rename”
Set characters
Store
select
Edit Service Name
RETURN
Name
Analogue
Service List
green
A
U
a
u
set
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
(maximum: ve characters)
To move the programme position
Select new position
Store
yellow
Editing Programmes
Edit analogue
programmes
(Change
name, Move)
3 FTP
select
yellow
select
Enter the PIN number (4 digits)
Child Lock-PIN Entry
Please enter new PIN
PIN
•
•
1 of 2
* * * *
Enter the PIN number twice at rst
setting.
Make a note of the PIN number in
case you forget it.
Select “Child Lock List”
access
Child Lock
Control
programme
audience
Change PIN
Child Lock List
Advanced
You can lock specic programmes / AV input terminals and control who watches them.
(When the locked programme / input is selected, a message appears; by entering the PIN
number, you can watch it.)
Access
select
Select the programme / input to be locked
Child Lock
Child Lock List - Services and AV
Name
1 BBC One Wales
7 BBC THREE
14 E4
VCR
1 BBC1
2 *****
AV1
AV2/S
Wed 12/05/04 10:46
Type
Free TV
Free TV
Free TV
Analogue
Analogue
Analogue
AV
AV
set
Lock
To change the PIN number
•
To cancel
Select the locked programme /
input
select
Appears when the programme / input is locked
Select “Change PIN” in
•
•
•
To lock all
yellow
To cancel all locks
blue
and enter a new PIN number twice.
Note
Setting “Shipping Condition” (p. 34) erases the PIN number and all settings.
31
Tuning Programmes
You can retune all the TV programmes when moving house or search for new services which may have
recently started broadcasting.
INPUT
OPTION SD CARD
1
Select DVB or Analogue
2
Display the menu
3
Select “Setup”
•
•
“DVB Manual Tuning”, “Add New DVB Services”, “New Service
Message” and “DVB Signal Condition” are available in DVB
mode only.
“Analogue Manual Tuning” is available in Analogue mode only.
MENU
EXIT
RETURN
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
4
5
To return to TV
Select “Tuning Menu”
Setup Menu
1/3
Timer Programming
DVB Profile Edit
DVB Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Power on Preference
select
Access
Off
TV
Select a function
access
Tuning Menu
Auto Setup
DVB Manual Tuning
Analogue Manual Tuning
Add New DVB Services
New Service Message
DVB Signal Condition
Access
Access
Access
Access
On
Access
EXIT
6
Set
For Auto Setup, using the buttons on the side of the TV (p. 7)
Press repeatedly until “Auto Setup” appears
Access “Auto Setup”
Start “Auto Setup”
32
access
•
To return to TV
select
Automatically retune all DVB or Analogue programmes received in the area.
Only DVB programmes are retuned in DVB mode.
Only Analogue programmes are retuned in Analogue mode.
If a Child Lock PIN number (p. 31) has been set, it must be entered.
••
•
Set all DVB
or Analogue
programmes
automatically
Auto Setup
Scan
All Digital tuning data will be erased
Start Auto Setup
Analogue
Manual
Tuning
EXIT
Free TV: 4
••
•
•
21
68
This will take about 3 minutes.
Channel
Service Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
RETURN
Pay TV: -
Type
Free TV
Free TV
Free TV
Free TV
Radio: Searching
Quality
10
10
10
10
Data: -
All the previous tuning settings are erased.
The analogue settings are downloaded to a Q-Link compatible equipment connected to
the TV in Analogue mode.
When the operation is completed, the programme at programme position “1” will be
displayed.
If tuning has not been done completely “DVB Manual Tuning”, “Analogue Manual Tuning”
Normally use “Auto Setup” or “Add New DVB Services” to add DVB programmes to your
service list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this
function.
select channel
DVB Manual Tuning
Frequency
Signal
Quality
Analogue
Scan
Signal Strength
Position
Service Name
[CH21]
474
0
21
0
Type
MHz
1068
10
New
search
Free TV: -
Set Analogue
programme
manually
Auto Setup - Digital
Pay TV: -
Radio: Stopped
•
Data: -
All services found will be added to the
DVB Service List.
Set Analogue programme manually after Auto Setup.
If a VCR is connected only with the RF cable, select programme position “0”.
•
Analogue Manual Tuning
1 BBC1
Manual Tuning
CH33
68
21
Select the programme position
Select the programme
Tuning Programmes
DVB Manual
Tuning
Settings are made automatically
Auto Setup
•
Set DVB
programme
manually
Start Auto Setup
Search and store
search
store
Add New
DVB Services
Display a
notication
message
New Service
Message
Check
DVB signal
DVB Signal
Condition
Any new services found will be added to the DVB Service List.
Add New DVB Services
Scan
Analogue Scan
21
68
This will take about 3 minutes.
Channel
Service Name
Free TV: -
Pay TV: -
Type
Radio: Searching
Quality
•
The new service is added with the current settings
saved as they are.
Data: -
Advanced
Add DVB
programme
automatically
Selects whether to give a notication message when a new DVB service is found. (Off / On)
Selecting OK (Auto Setup) will delete the current Prole and
New DVB service found!
Press OK to start Auto Setup.
Childlock settings.
Press EXIT to lgnore.
•
Selecting Auto Setup will delete
current Profile and Childlock settings
Selects a programme and checks the DVB signal condition.
To change the programme
•
DVB Signal Condition
DVB Programme
[CH70] CBBC Channel
Signal Quality
0
10
0
10
Signal Strength
A good Signal Strength is not an indication of
suitable signal for DVB reception. Please use
the Signal Quality indicator as follows:
Signal Quality:
Green bar Good
Yellow bar Poor
Red bar Bad (Check the aerial)
••
•
33
Restore Settings
Resets the TV to its original condition, i.e. no programmes tuned in.
All settings other than “Owner ID” (programmes, picture, sound quality, etc.) are reset.
1
Display the menu
2
Select “Setup”
MENU
INPUT
OPTION SD CARD
EXIT
RETURN
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
3
To return to TV
4
EXIT
Select “Shipping Condition”
Setup Menu
Teletext
Preferred Subtitles
Shipping Condition
Owner ID
Common Interface
System Update
Picture Overscan
Input Labels
Banner Display Timeout
2/3
access
FASTEXT
English
Access
select
On
3 seconds
Set
Check the message and initialise
Shipping Condition
Restore
Settings
All tuning data will be erased
Are you sure?
Are you sure?
Confirm
EXIT
RETURN
Shipping
Condition
Follow the on-screen instructions
•
“Auto Setup” will automatically start when Mains power On / Off switch is next
turned On. (p. 10)
To retune TV programmes only, e.g. after moving house
“Auto Setup” (p. 33)
34
Owner ID
Entry of the security code (PIN number) and “personal information” (your name, address and postcode).
In the unfortunate event of theft it will help the Police to determine the owner.
If you have skipped the Owner ID input in “Auto Setup” (p. 10), and input it later, start from .
If you input the Owner ID in “Auto Setup” (p. 10), perform .
INPUT
OPTION SD CARD
1
Display the menu
2
Select “Setup”
MENU
EXIT
RETURN
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
Select “Owner ID”
EXIT
4
Access
select
On
3 seconds
Set
Enter the PIN number (4 digits)
Owner ID
Please enter new PIN
PIN
0
* * * *
9
••
Enter the PIN number twice at rst setting.
Make a note of the PIN number in case you
forget it.
PIN entry
RETURN
Enter your name, address, and postcode, in that order
Select the
entry eld
Enter the
“User input” mode
Input
owner ID
Select the
character
Owner ID
Set
RETURN
Store
To check the “personal information” stored
Advanced
EXIT
access
2/3
FASTEXT
English
Owner ID
Restore Settings
To return to TV
Setup Menu
Teletext
Preferred Subtitles
Shipping Condition
Owner ID
Common Interface
System Update
Picture Overscan
Input Labels
Banner Display Timeout
• •
3
Hold down for
about 6 sec.
Displays the information
on the screen
(for several sec.)
Owner ID
NAME
HOUSE NO
POSTCODE
A
•
The PIN number is
not displayed.
EXIT
To change the PIN number
access
Select the “PIN” eld
Enter a new PIN number twice
select
35
Input Labels
For easier identication and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
To select the input mode p. 20
•
1
Display the menu
2
Select “Setup”
MENU
INPUT
OPTION SD CARD
EXIT
RETURN
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
3
4
Select “Input Labels”
Setup Menu
EXIT
FASTEXT
English
select
On
Access
3 seconds
Select a input terminal and set
Input Labels
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
To return to TV
access
2/3
Teletext
Preferred Subtitles
Shipping Condition
Owner ID
Common Interface
System Update
Picture Overscan
Input Labels
Banner Display Timeout
DVD
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
set
select
The labels you set will be displayed in “Input Selection” menu (p. 20) or banner.
If “Skip” is selected, you cannot select the mode.
•
User input
You can name each input terminals freely.
Select “User input”
Set characters
select
RETURN
Name
select
access
Store
User input
set
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
(maximum: ten characters)
36
Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC p. 48
•
INPUT
1
Select the external input
2
Select “PC”
OPTION SD CARD
EXIT
RETURN
access
Input Selection
select
Corresponding signals p. 52
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
•
To return to TV
PC menu setting (changed as desired)
•
Menu
To make settings
Displaying PC Screen on TV
Input Labels
••
•
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
“How to Use Menu Functions”
Item
to
(p. 22)
Adjustments / Configurations (options)
Picture
R-Gain
Adjusts the white balance for red areas
G-Gain
Adjusts the white balance for green areas
Advanced
B-Gain
PC
Settings Gamma
Adjusts the white balance for blue areas
(2.0 / 2.2 / 2.5)
Press the OK button to reset to the default Picture settings
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
Options change depending on signals
•
•
Clock
Set to the minimum level if noise occurs
Adjusts horizontal position
Advanced
Reset to
Default
H-pos
Setup
PC
Setup
Adjusts vertical position
V-pos
Clock Phase
Sync
•
Reset to
Default
Other items
Eliminates icker and distortion
• Adjust after Clock adjustment
• Set to the minimum level if noise occurs
Chooses another synchronous signal if the image is distorted (H & V / On G)
horizontal and vertical signals from your PC
• HOn&GV :: byby the
the green signal from your PC (if available)
Press the OK button to reset to the default Setup settings
p. 24 and p. 25
37
Recording Controls
Timer Programming from Menu
The Timer programming menu allows you to choose programmes that you wish to record. At the correct
time, the TV will switch on and tune to the correct programme (even if the TV is in Standby mode).
TV Guide may also be used to set timer programming. (p. 18)
If the recorder is compatible with Q-Link or similar technologies (p. 43), and setup / connection are
done completely (p. 42 and p. 43), you do not need to programme the recorder – the TV will control
the recording progress.
If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in Setup Menu (p. 25)
to the connected terminal (AV1 or AV2), and make timer programming of the recorder (Read the
manual of the recorder).
“D” means DVB programme and “A” means Analogue programme.
•
•
•
INPUT
OPTION SD CARD
EXIT
RETURN
1
Display the menu
2
Select “Setup”
MENU
access
Main Menu
VIERA Link
Picture
Sound
select
Setup
3
4
To return to TV
EXIT
5
Select “Timer Programming”
Setup Menu
Timer Programming
DVB Profile Edit
DVB Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Power on Preference
1/3
select
Off
TV
Set
Store
To stop recording
GUIDE
EXIT
Caution
38
••
••
access
Access
The TV must either be On or in standby.
For preparations of a recorder, read the manual of the recorder.
No other programme can be selected during recording.
It may not be possible to record an encrypted programme (which is copy-protected).
Start making
the settings
Repeat the operations as below,
and set items in the order of to
set
select
the item
•
, and can
also be entered
with numeric
buttons.
Timer recording
Records according to the time setting
Guide: Event recording
Records according to the TV Guide signal (p. 19)
S/P: Split event recording (p. 19)
Timer Programming
Displayed
if the timer
programming
events are
overlapped
Date
Star t
End
D
7 BBC T HREE
<TIMER>
6/8 FR
1 7: 00
1 8: 30
m in.
90
D
1 BBC1
Ho lid ay New s
6/8 FR
1 8: 00
2 0: 00
1 20
Off
D
3 I TV1
F r esh ly Squeezed Extra
7/8 SA
2 1: 30
2 2: 30
60
Off
--/--
--:--
--:--
---
---
Off
Guide
SP
-- -
•
Programme
Subtitles (Off / Auto)
Recording time
(automatic display)
Date
one day ahead
daily or weekly
(press repeatedly)
To change a timer programming event
••
••
Daily SU-SA: Sunday to Saturday
Daily MO-SA: Monday to Saturday
Daily MO-FR: Monday to Friday
Weekly SA/FR/TH/WE/TU/MO/SU:
Same time on the same day every week
access
Select the programme to be changed
select
Correct as necessary
(as above)
To cancel a timer programming event
Select the programme to be deleted
Recording Controls
Ending time
Starting time
•
Set timer
programming
details
Current timer
programming
event
Wed 05/08/04 18:50
Pos. Name
red
To cancel a timer programming event temporarily
To view details of the programming
Select the programme to be viewed
blue
•
•
Each time pressed:
cancel stop cancelling
Press again to return to
Timer Programming menu.
Advanced
Select the programme to be cancelled
Event recording (Timer Programming from TV Guide-EPG)
••
•
••
•
p. 19
Event recording is a timer programme controlled by information from the TV Guide.
Programme start and end times may be changed by broadcasters and sent to the TV for timer programme to
follow the change.
Split Programme is a programme which is interrupted by one or more events.
Both of the above are subject to signals being sent by broadcasters.
Direct TV Recording p. 43 and p. 45
You can record the current programme to DVD Recorder / VCR immediately.
Note
Check that the Timer LED (Orange) is lit. If not, timer programmes are not active or not stored.
„!“ will identify any timer events that have been set and overlap. If this occurs then the rst event will start and
nish as programmed. The next timer event can then start.
2 mins. before the starting time: a reminder message appears. EXIT
(To remove the message
; To cancel the programming
)
A Timer Programming event will automatically change to the desired channel 10 seconds before the start time.
To stop Timer Programming event directly prior to the start time, it is necessary to stop the recorder manually.
Timer Programming will be performed even if the TV is in Pause Live TV recording (p. 45). In this case, Pause
Live TV recording will be cancelled.
39
Viewing from SD Card
Still images recorded by digital cameras will be displayed.
1
Insert the SD Card
2
Enter SD mode (Photo View Mode)
3
Select the photo to be viewed
Signal output from all AV terminals will be
disabled during SD card view.
Press OK to proceed.
Press EXIT to return to TV viewing.
•
•
Warning message for output
signal is displayed.
All photos in SD Card are displayed by thumbnail.
INPUT
OPTION SD CARD
EXIT
Selected
photo
Error display
(images that could not be loaded, etc.)
select
Photo View Mode
All pictures
RETURN
1/175
p1010001
Filename
p1010001
Date
23/10/2007
Pixel
1600 x 1200
p1010002
p1010003
p1010004
view
p1010005
p1010006
p1010007
p1010008
p1010009
p1010010
p1010011
p1010012
Reading
View
MENU
Select
EXIT
Select
RETURN
Slide show
Sort by Month
Sort by Date
(Thumbnail)
Selected photo information is displayed
The maximum number of characters for Filename is 8.
The photo without record of the date is shown “**/**/****”.
•
Slide show
p. 41
••
To sort by date or month recorded
(Sort by Month / Sort by Date)
Display the thumbnail grouped by
the same date or the same month
yellow
blue
•
TV
4
ToEXIT
return to TV
Select the group to be
viewed
(Sort by Month)
select
(Sort by Date)
view the
thumbnail of the
selected group
Note
The group of the photos without record of the date is shown as
“Unknown”.
View
OPTION
To display the operation guide
or
To the previous photo
Displayed one at a time
SD CARD
Rotate 90
(anti-clockwise)
or
To the next photo
Single view
Rotate
Rotate 90
(clockwise)
EXIT
Select
List
Prev
MENU
Rotate
Slide show
•
To return to thumbnail
RETURN
Operation guide
Caution
40
•
During the operation, no signals are output from the monitor output terminals.
(Photos)
•
For details on SD Cards
p. 51
To remove
To insert
SD
Card
Push until a click is heard
Label surface
Press the centre of the card
Slide show
Start Slide show (operate in step
or
)
Select the photo for the first view
Start Slide show
•
Note
green
A slide show will be completed within the group from which it was started.
Slide show settings (operate in step
or
Display the
Select “Viewing Setup”
menu
)
Select the items and set
access
Main Menu
Picture
Interval
Repeat
Viewing Setup
Menu
set
Viewing Setup
MENU
Item
•
5 seconds
Off
select
select
“Picture Menu” (p. 24)
Adjustments / Configurations (alternatives)
Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Repeat
Slide show repeat (Off / On)
Do not remove the card while the TV is accessing data (this can damage card or TV).
Do not touch the pins on the back of the card.
Do not subject the card to a high pressure or impact.
Insert the card in the correct direction (otherwise, card may be damaged).
Electrical interference, static electricity, or erroneous operation may damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Advanced
Viewing
Setup
Interval
Cautions in handling SD Card
••
••
••
Viewing from SD Card
(Photos)
red
•
• To pause
• To return to Single view
On screen messages
Message
Cannot read le
Is SD Card in?
No valid le to play
Over 9999 pictures found
Meaning / Action
••
•
•
•
The le is broken or unreadable.
The TV does not support the format.
(For the applicable formats and data, see p. 51.)
Conrm SD card is inserted correctly.
The card has no data.
Maximum valid number of photos is 9,999.
41
Link Functions (
)
Q-Link
VIERA Link
Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 43)
VIERA Link (HDAVI ControlTM) connects the TV and the equipment with VIERA Link function, and
enables easy control, convenient recording, playback, etc. (p. 44 - 47)
You can use Q-Link and VIERA Link functions together.
Summary of Q-Link and VIERA Link functions
Connection
Features
Q-Link
(SCART connection)
VIERA Link
(HDMI connection only)
VIERA Link
(SCART and HDMI connection)
O
-
O
O
O
O
-
O
O
O
O
O
O
O
O
-
O*
O*
Analogue programme
download
Easy playback***
Power on link***
Power off link***
Speaker control***
Control the menu of the
connected equipment by
VIERA remote control
Direct TV Recording
Pause Live TV programme
O**
O**
:Available with the equipment which has “HDAVI Control 2” or “HDAVI Control 3” function.
:Available with the equipment which has “HDAVI Control 3” function.
: These features may be available even with other manufacturers’ equipment supporting HDMI CEC.
O
Connections
Read the manual of the equipment, too.
Q-Link
SCART cable
•
•
•
DVD Recorder / VCR
with Q-Link function
Connect the DVD Recorder / VCR supporting Q-Link to the
TV’s AV1 or AV2 terminal via a fully wired SCART cable.
VIERA Link
HDMI cable
SCART cable
Use fully wired SCART cable.
HDMI cable
Use fully wired HDMI compliant cable.
Non-HDMI-compliant cables cannot be
utilized.
Recommended Panasonic’s HDMI cable
part number:
• RP-CDHG10 (1.0 m)
• RP-CDHG15 (1.5 m)
• RP-CDHG20 (2.0 m)
• RP-CDHG30 (3.0 m)
• RP-CDHG50 (5.0 m)
DIGA Recorder / HD Video Camera
with VIERA Link function
•
•
•
SCART cable
Connect the equipment supporting VIERA Link to the TV’s AV1, AV2, HDMI1, HDMI2 or HDMI3 terminals via
fully wired SCART and HDMI cables together.
Some functions are available only with HDMI cable connection. But use both HDMI and SCART cables to
support many features normally.
For Speaker control (Home Cinema)
To use Amplier
Speaker system
HDMI cable
RCA cable
Amplier with
VIERA Link
function
SCART cable
42
HD Video Camera with
VIERA Link function
To use Player theatre
HDMI cable
HDMI
cable
HDMI
cable
•
DIGA Recorder with
VIERA Link function
RCA cable
Speaker system
Player theatre with
VIERA Link function
Q-Link
Preparations
•
••
••
Connect the DVD Recorder / VCR with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”
Q-Link connection p. 42
Set up the DVD Recorder / VCR. Read the manual of the equipment.
Q-Link terminal setup in Setup Menu “Q-Link” (p. 25), “AV1 / AV2 out” (p. 25)
Download Analogue programme setting “Q-Link Download” (p. 25) or “Auto Setup” in Analogue mode (p. 33)
or “Auto Setup” - when first using the TV (p. 10)
Features available
Some recorders are not applicable. Read the manual of the recorder.
Recording the current programme in DVD Recorder / VCR immediately.
•
Available conditions:
Current mode
Analogue
DIRECT TV REC
•
•
•
•
What you see
is What you
record
Recorder
Recorder’s tuner
-
Recorder’s
external input
-
TV monitor out
When Direct TV Recording is performed, the
recorder is automatically turned on if it is in Standby
mode.
Changing programme or turning off the TV is
available while the recorder is recording from its
own tuner.
Changing programme is not available while the
recorder is recording from the TV tuner.
Turning off the TV will stop the recording if the
recording from an AV source connected to the TV.
GUIDE
EXIT
Information
/ Message
Recording information or if recording is not possible, a message is displayed.
Power
on link
and Easy
playback
When DVD Recorder / VCR starts playback or direct navigator / function menu
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the recorder is also automatically set to
Standby. (Only when the videocassette or DVD is not active.)
• “DATA LOGIC” (a trademark of Metz Corporation)
• “Easy Link” (a trademark of Philips Corporation)
Advanced
To stop recording
•
Direct TV
Recording -
How to record
TV monitor out
Recorder’s tuner
TV monitor out
Link Functions
(Q-Link / VIERA Link)
DVB
AV
(watching recorder’s
tuner)
AV
(watching recorder’s
external input)
AV
(watching TV’s
external input)
Using tuner
TV
Recorder
TV
• “Megalogic” (a trademark of Grundig Corporation)
• “SMARTLINK” (a trademark of Sony Corporation)
43
Link Functions (
VIERA Link “
)
Q-Link
VIERA Link
ControlTM”
Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 3” function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with
HDMI and SCART cables allow you to interface them automatically.
These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
•
•
Some functions are not available depending on the equipment’s version of HDAVI Control. Please conrm the
connected equipment’s version of HDAVI Control.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
About applicable Panasonic equipment, consult your local Panasonic dealer
or refer to the URL: www.panasonic.co.uk
Preparations
••
••
•
••
Connect the equipment supporting VIERA Link.
VIERA Link connection p. 42
Set up the connected equipment. Read the manual of the equipment.
For optimal recording, the settings of the recorder might be required. For details, read the manual of the
recorder.
Download Analogue programme setting “Q-Link Download” (p. 25) or “Auto Setup” in Analogue mode (p. 33)
or “Auto Setup” - when first using the TV (p. 10)
Set VIERA Link On in Setup Menu “VIERA Link” (p. 25)
Set up the TV
After connection, turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2 or HDMI3 (p. 20), and make sure that an image is displayed
correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
Features available
Easy
playback
Automatic Input switching - When the connected equipment is operated, input mode
is switched automatically. When it is stopped operating, input mode is returned.
Power on
link
When the connected equipment starts playback or direct navigator / function menu
for the equipment are activated, the TV is automatically turned on. (Only when TV is
in Standby mode.)
Power off
link
44
When TV is set to Standby mode, the connected equipment is also automatically
set to Standby.
•
This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.
Features available (Using VIERA Link Menu)
Recording the current programme in DIGA Recorder immediately.
••
••
••
This function is available with DIGA Recorder which has “HDAVI Control 3” function.
Connect DIGA Recorder with both HDMI and SCART cables to use this function.
If you cannot operate, check the settings and the equipment “Preparations” (p. 44)
Changing programme or turning off the TV is available while the recorder is recording from
its own tuner.
Changing programme is not available while the recorder is recording from the TV tuner.
Turning off the TV will stop the recording if the recording from an AV source connected to
the TV.
Display “VIERA Link Menu”
Direct TV
Recording What you see
is What you
record
(HDAVI Control 3)
Select “Direct TV Rec” and start recording
start
VIERA Link Menu
Direct TV
Rec
•
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
Start
Recorder
Home Cinema
Home Cinema
select
DIRECT TV REC
You can also start recording directly
To stop recording
Select “Stop” in “Direct TV Rec” and access
VIERA Link Menu
select
Stop
Recorder
Home Cinema
Home Cinema
stop
You can also stop recording directly.
EXIT
•
GUIDE
You can pause the live TV programme and resume later.
Live TV programme will be recorded on HDD of the connected DIGA Recorder.
•
••
Link Functions
(Q-Link / VIERA Link)
•
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
This function is available with DIGA Recorder which has HDD and “HDAVI Control 3”
function.
Connect DIGA Recorder with both HDMI and SCART cables to use this function.
If you cannot operate, check the settings and the equipment “Preparations” (p. 44)
Access and pause the live TV programme
Display “VIERA Link Menu”
INPUT
OPTION SD CARD
Select “Pause Live TV” and pause
(
)
Pause Live
TV
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
RETURN
Access
Start
Recorder
Home Cinema
Home Cinema
select
The TV picture will be paused.
Live TV programme is recorded on HDD from where it was
paused.
If the paused TV picture disappears after a few minutes
OPTION
(the paused picture will be restored)
Follow the operation guide to operate Pause Live TV function.
•
•
•
Advanced
Pause
Live TV
programme
HDAVI Control 3
and
Recorder with HDD
pause
VIERA Link Menu
EXIT
To operate Pause Live TV
search backward
pause
search forward
playback
•
Operations may be different
depending on the recorder. In
this case, follow the operation
guide or read the manual of
the recorder.
stop
•
If you stop playback, the recorded programme
will be deleted from HDD.
To return to Live TV
(stop playback of Pause Live TV / cancel pause)
Select “Yes”
Pause Live TV
Stop Pause Live TV?
select
•
stop
Yes
If you stop playback or cancel pause, the recorded
programme will be deleted from HDD.
No
45
Link Functions (
)
Q-Link
VIERA Link
Features available (Using VIERA Link Menu)
You can control some functions of the connected equipment with this TV remote
control (point the remote control at the TV’s signal receiver).
•
•
This function is available with the equipment which has “HDAVI Control 2” or
“HDAVI Control 3” function.
If you cannot operate, check the settings and the equipment “Preparations” (p. 44)
Access and operate the menu of the equipment
Display “VIERA Link Menu”
INPUT
OPTION SD CARD
EXIT
Select “VIERA Link Control”
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
Start
Recorder
Home Cinema
Home Cinema
select
RETURN
Select the equipment you want to access
•
“Home Cinema” means Player theatre,
Recorder theatre and Amplier.
VIERA Link Menu
Control
the menu
of the
connected
equipment
by VIERA
remote
control
Control 2
(HDAVI
HDAVI Control 3)
VIERA Link
Control
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
Recorder / Player / Home Cinema / Video Camera
The type of the connected equipment is
displayed.
Select the type of the equipment and
access.
If you access
the invalid equipment
select
When the equipment with
“HDAVI Control” function is
connected
access
The menu of the accessed equipment
(Input mode will be changed automatically)
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
Start
Recorder
Home Cinema
Home Cinema
Recorder / Player / Home Cinema /
Video Camera
Operate the menu of the equipment
•
Available VIERA remote control buttons
(depending on the connected equipment):
The type of the connected
equipment is displayed.
But you cannot access it. Use its
own remote control to operate the
equipment.
Move the cursor / select the menu
Move the cursor / access / adjust
Store / set / access
When the equipment of other
types or manufacturers is
connected
RETURN
Return to the previous menu
EXIT
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
Exit the menu
Start
Others
Home Cinema
Home Cinema
OPTION
Others
“Others” is displayed.
You cannot access it. Use its own
remote control to operate the
equipment.
46
Start
Recorder
Home Cinema
Home Cinema
red green yellow blue
•
Display the operation guide for the
equipment /
The same functions with the
OPTION button of the equipment
Access when the key words are
displayed on colour bar
About the operations for the equipment, read
the manual of the equipment.
Features available (Using VIERA Link Menu)
You can control the theatre speaker with this TV remote control (point the remote
control at the TV’s signal receiver).
•
•
This function is available with the Amplier or Player theatre which has “HDAVI Control”
function.
If you cannot operate, check the settings and the equipment “Preparations” (p. 44)
Access and control the speaker volume
INPUT
Display “VIERA Link Menu”
OPTION SD CARD
EXIT
Select “Speaker Selection”
RETURN
VIERA Link Menu
Start
Recorder
Home Cinema
Home Cinema
select
•
Speaker
control
Link Functions
(Q-Link / VIERA Link)
Pause Live TV
Direct TV Rec
VIERA
Control
SpeakerLink
Selection
Speaker Selection
Speaker
Selection
Set to “Home Cinema” or “TV”
set
Home Cinema
Amplifier or Player theatre will be
automatically turned on if it is in Standby
mode and the sound is from theatre
speakers connected to the equipment.
TV
Volume up / down
Mute
The sound of TV speakers is mute.
When the equipment is turned off, TV speakers
will be active.
Advanced
•
•
••
TV
TV speakers are active.
••
••
•
••
•
•
Note
This function may not work properly depending on the connected equipment.
Image or sound may not be available for the rst few seconds when the playback starts.
Image or sound may not be available for the rst few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available by using the remote control for Amplier or Player theatre. Read the manual of
the equipment.
About HDMI cable for connecting Panasonic HD Video Camera, read the manual of the equipment.
If more than one equipment of the same type are connected to the TV by HDMI cables, for example two DIGA
Recorders to HDMI1 and HDMI2, VIERA Link will only be available for the lower terminal number, in this case
HDMI1.
“HDAVI Control 3” is the newest standard (current as of December, 2007) for HDAVI Control compatible
equipment. This standard is compatible with conventional HDAVI equipment.
To conrm this TV’s version of HDAVI Control “System Information” (p. 25)
47
External Equipment
These diagrams show our recommendations for connection of your TV to various pieces of equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specications (p. 59).
Camcorder /
Game equipment
(S-VIDEO)
or
(VIDEO)
Fully wired HDMI compliant cable
(AUDIO)
Camcorder /
HDMI equipment
Fully wired HDMI
compliant cable
(M3 stereo
mini plug)
To watch DVDs
(Listening)
(Viewing)
Headphones
DVD player
To adjust volume
“Headphone Volume” in the Sound Menu (p. 24)
Types of connectable equipment to each terminal
AV1
AV2
(with HDMI)
(with HDMI)
Terminal
Recording / Playback
(equipment)
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
To use amplier with speaker system
Q-Link
VIERA Link
48
Direct TV Recording
: Recommended Connection
AV3 (Side of TV)
To listen with
speakers
PC
HDMI equipment
Computer
Conversion
adapter
(if necessary)
DVD
Recorder
Amplier with
speaker system
Fully wired HDMI
compliant cable
(Listening)
(Viewing)
RCA
cable
RF cable
•
COMPONENT
AUDIO
OUT
AV 1
RGB
VIDEO
AV2
or
RGB
VIDEO
S VIDEO
AUDIO
IN Y
L
L
PB
R
R
PR
To record /
playback
SCART cable
HD Satellite receiver
COMPONENT
DVD Recorder /
VCR
SCART cable
Advanced
To watch satellite
broadcasts
External Equipment
PC
AUDIO OUT
Y
L
L
PB
R
PR
R
1
2
3
49
Technical Information
Auto Aspect
The optimum size and aspect can be chosen, and you can enjoy ner images. (p. 14)
Auto
Auto aspect determines the best aspect ratio to use to ll your screen. It does this using a four step process to
determine if the picture being viewed is a widescreen picture.
If Auto aspect detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Auto
aspect does not detect a widescreen signal then this advanced TV enhances the picture for optimum viewing
pleasure.
The text shown on the screen indicates how Auto aspect determined which ratio to use:
“WIDE” appears in the top left of the screen if a widescreen identication signal (WSS) is found or a signal found
through a SCART or HDMI terminal. Auto aspect switches to the appropriate 16:9 or 14:9 widescreen ratio. This
function will also work in any aspect mode. “Auto” appears in the top left of the screen if black stripes above and
below the picture are detected. Auto aspect chooses the best ratio and expands the picture to ll the screen.
This process can take several minutes, depending on the darkness of the picture.
SD
Signal name
PAL
PAL 525/60
DVB
M.NTSC
NTSC (AV input only)
525(480)/60i
525(480)/60p
625(576)/50i
625(576)/50p
750(720)/50p
750(720)/60p
1125(1080)/50i
1125(1080)/60i
1125(1080)/50p
1125(1080)/60p
1125(1080)/24p
TV
O
O
-
Aspect Control Signal
Widescreen signal (WSS)
Control signal through SCART (pin 8) or HDMI terminal
AV1
AV2
AV3 COMPONENT
AV1
AV2
HDMI1
HDMI2
HDMI3
O
O
O
O
O
O
O
-
-
-
-
-
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
HD
O
O
O
O
O
O
O
O
O
O
O
-
•
•
The ratio varies depending on the programme, etc. If the ratio is greater than the standard “16:9”, black bands
may appear at the top and bottom of the screen.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. (See the VCR manual.)
Note
HDMI connection
HDMI (high-denition multimedia interface) allows you to enjoy high-denition digital images and high-quality sound
by connecting the TV and the equipment.
HDMI-compatible equipment (1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can
be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see “External Equipment” (p. 48).
50
••
•
••
••
••
•
•
•
••
Note
HDMI is the world’s rst complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI1 / 3 terminal via a DVI to HDMI adapter
cable (2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use
COMPONENT-AUDIO terminals / HDMI3: use AV3 audio terminals).
Audio settings can be made on the “HDMI1 / 3 Input” menu screen. (p. 24)
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
HDMI2 terminal is for digital audio signal only.
Use with a PC is not assumed.
If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
These HDMI connectors are “type A”.
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
An equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”,
“S-VIDEO”, or “VIDEO” to receive analogue signals.
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see p. 52.
This TV incorporates HDMITM (Version 1.3 with x.v.ColorTM) technology.
(1): The HDMI logo is displayed on HDMI-compliant equipment.
(2): Enquire at your local digital equipment retailer shop.
Updating the DVB software
From time to time, a new version of software for DVB mode may become available for download to enhance the
performance or operations of the TV.
A notication banner will appear when you tune to one of the BBC channels, or you can search for a new version
software by using the “System Update Search Now” function (p. 29).
New version 1.00 found.
Do you really want to update the software and reboot the system?
To start downloading press “OK”, this may take up to 20 minutes to
Press OK to download the new version
complete.
Press EXIT to lgnore
To ignore the new software press “EXIT”, but this banner will keep
appearing during the period of new software availability, usually 2 to 3 days.
To download any new software automatically, ensure that the “Auto Update Search in Standby” function in the
System Update menu is set to “On” (p. 29).
The TV will then download new software automatically at night if it is left in standby without any timer programme
in progress.
•
Note
During software download and update, DO NOT switch off the TV.
Data format for Card browsing
Photo
: Still images recorded with digital still cameras compatible with JPEG files of DCF and EXIF standards
Data format
: Baseline JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Max. number of files : 9,999
Image resolution : 160 × 120 to 10,000,000
Compliant card type (maximum capacity): SDHC Card (16 GB), SD Card (2 GB), Multi Media Card (128 MB),
miniSD Card (1 GB) (requiring miniSD adapter)
If miniSD Card is used, insert / remove it together with the adapter.
Check the latest information on the card type at the following website. (English only)
http://panasonic.co.jp/pavc/global/cs/
•
••
DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
••
••
••
•
Note
A JPEG image modied with a PC may not be displayed.
Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.
Partly degraded les might be displayed at a reduced resolution.
Only “.JPG” extension can be read by this TV.
The folder and le names may be different depending on the digital camera used.
Do not use two-byte characters or other special codes.
The card may become unusable with this TV if the le or folder names are changed.
AV2 SCART terminal
(RGB, VIDEO, Q-Link)
(RGB, VIDEO, S-VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
HDMI terminal
Chrominance in
Luminance in
Chrominance earth
Luminance earth
Hot Plug Detect
19
DDC/CEC Ground 17
SCL
15
CEC
13
TMDS Clock Shield 11
TMDS Data0
9
TMDS Data0+
7
TMDS Data1 Shield 5
TMDS Data2
3
TMDS Data2+
1
18
16
14
12
10
8
6
4
2
+5V Power
SDA
Reserved (in cable but N.C. on device)
TMDS Clock
TMDS Clock+
TMDS Data0 Shield
TMDS Data1
TMDS Data1+
TMDS Data2 Shield
FAQs, etc.
AV3 S-VIDEO 4 pin terminal
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
Technical Information
AV1 SCART terminal
•
SCART, S-VIDEO and HDMI terminal information
51
Technical Information
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
•
•
••
••
Note
Some PC models cannot be connected to this TV.
When using PC, set the colour display quality of PC to the highest position.
For details of the applicable PC signals, see below.
Max. display resolution
4:3
16:9
Aspect
•
1,024 × 768 pixels
1,366 × 768 pixels
D-sub 15-pin connector signal
5
4
3
2
1
Pin No.
10 9 8 7 6
15 14 13 12 11
Signal Name
Pin No.
R
G
B
NC (not connected)
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC (not connected)
HD
VD
NC (not connected)
Input signal that can be displayed
COMPONENT (Y, PB, PR), HDMI
Mark: Applicable input signal
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
1,125 (1,080) / 24p
COMPONENT
HDMI
Horizontal frequency (kHz)
31.47
31.47
37.50
37.88
46.88
53.67
31.44
48.36
56.48
60.02
68.68
63.98
48.39
35.00
49.73
68.68
Vertical frequency (Hz)
70.07
59.94
75.00
60.32
75.00
85.06
59.89
60.00
70.07
75.03
85.00
60.02
60.04
66.67
74.55
75.06
PC (D-sub 15P)
Signal name
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
852 × 480 @60 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
1,366 × 768 @60 Hz
Macintosh13” (640 × 480)
Macintosh16” (832 × 624)
Macintosh21” (1,152 × 870)
52
••
••
Note
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Applicable input signal for PC is basically compatible to VESA standard timing.
PC signal is magnied or compressed for display, so that it may not be possible to show ne detail with sufcient
clarity.
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care
Centre for assistance. For details (p. 60)
White spots or shadow
images (noise)
•
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
••
••
•
Is the TV in “AV mode”?
Is the mains lead plugged into the socket
outlet?
Is the TV turned On?
Check Picture Menu (p. 24) and volume.
Check all required SCART cables and
connections are rmly in place.
Auto aspect
•
Auto aspect is designed to provide you
with the best aspect ratio to use to ll your
screen. For user control please see p. 50.
Using AV button please conrm your
selection is S-Video I.e. AV2/S (p. 20).
No programmes shown
on TV Guide
TV Guide: Portrait
Wed 24/10/2007
10:46
All Types
D
Wed 24th
1 BBC O
D
7 BBC T
D
14 E4
All Services
D
70 CBBC
“VIERA Link” function
does not work and an error
message appears
••
•
On Screen messages
- I.e. EC/AV1
•
You can simply clear these
Press again to redisplay.
Check the settings of the recorder. For details, read the
manual of the recorder.
There may be red spots, blue
spots, green spots and black
spots on the screen
This is a characteristic of liquid crystal panels and is not
a problem. The liquid crystal panel is built with very high
precision technology giving you ne picture details.
Occasionally, a few non-active pixels may appear on the
screen as a xed point of red, green, blue or black.
Please note this does not affect the performance of your LCD.
The LCD panel moves slightly
when it is pushed with a finger
Clattered sound might be heard
•
There is some exibility around the panel to prevent the
damage to the panel.
Panel might move slightly when it is pushed with a nger, and
clattered sound might be heard. This is not a malfunction.
FAQs, etc.
Check the DVB transmitter.
Adjust the direction of the aerial to another
transmitter installed nearby.
Check the analogue broadcast.
If the image quality is poor, check the
aerial and consult your nearest dealer.
Conrm the connection.
Turn the connected equipment on and then switch the TV
on. (p. 44)
Recording does not start
immediately
•
••
•
Please conrm SCART cable and connection. Also please
set “AV1 / AV2 out” in the Setup Menu (p. 25).
Frequently Asked Questions
Technical Information
•
•
• •
S-Video / black and
white picture
Q-Link function does not work
53
FAQs
Problem
Screen
Chaotic image, noisy
••
Set “P-NR” in the Picture Menu (to remove noise). (p. 24)
Check nearby electrical products
(car, motorcycle, uorescent lamp).
No image can be
displayed
•
Is “Colour” or “Contrast” in the Picture Menu set to the minimum?
(p. 24)
Blurry or distorted image
(no sound or low volume)
•
Reset programmes. (p. 33)
Unusual image is displayed
•
Turn off the TV with Mains power On / Off switch, then turn it On
again.
Sound
No sound is produced
Sound level is low
or sound is distorted
•
••
••
Is “Sound mute” active? (p. 7)
Is the volume set to the minimum?
Sound signal reception may be deteriorated.
Set “NICAM” (p. 24) in the Sound Menu to “Off”.
(Analogue only)
Due to the digital reception technologies involved, quality of the DTV signals may be relatively low in
some cases, despite good reception of analogue programmes.
DVB
Interference or
frozen / disappearing
image in DVB
Sound is unusual
HDMI
Other
54
Actions
•
•
•
••
Check “DVB Signal Condition”. (p. 33)
If “Signal Quality” or “Signal Strength” are displayed in red, check
aerial.
If problem persists, consult your local Panasonic dealer.
Turn the TV off with the Mains power On / Off switch, then turn it
On again.
Set the sound setting of the connected equipment to
“2ch L.PCM”.
Check the “HDMI1 / 3 Input” setting in the Sound Menu. (p. 24)
If digital sound connection has a problem, select analogue sound
connection. (p. 50)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
••
••
Is the HDMI cable connected properly? (p. 48)
Turn Off the TV and equipment, then turn them On again.
Check an input signal from the equipment. (p. 52)
Use an equipment compliant with EIA/CEA-861/861B.
TV goes into
“Standby mode”
••
Off Timer function is activated.
The TV enters “Standby mode” about 30 mins. after analogue
broadcasting ends.
The remote control
does not work
••
Are the batteries installed correctly? (p. 6)
Has the TV been switched On?
An error message appears
••
Follow the message’s instructions.
If the problem persists, contact the authorized Service Centre.
On screen messages
Message
Meaning / Action
Condition” will erase all tuning data (p. 34).
•• “Shipping
“Auto Setup” will be erased all present DVB or Analogue tuning
datas (p. 33).
Are you sure ?
• Conrm correct operation.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
• Conrm correct operation.
Bad Signal
• The signal is weak. Check the aerial.
Feature not available
• It is not possible to record these sources (COMPONENT / HDMI / PC).
Invalid operation - Please check settings and
connections
• Check the Q-Link or VIERA Link connection and setting (p. 42 - 44).
Invalid system time. Please exit !
get the time information. Check the connection of the RF
• Cannot
cable.
Max. number of Timers already set !
• The maximum number of timer programming events is 15.
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to Ignore.
Selecting Auto Setup will delete
current Prole and Childlock settings
• There is a new DVB service or programme.
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to Ignore
• There is a new software available.
No module inserted
• Check the CI module inserted completely (p. 29).
No Recording - Check media
• The tape or disc may be “write protected”, missing or damaged.
No Recording - Already recording
• The equipment may already be recording.
No Recording - Unknown reason
recording may not be performed. Check the equipment.
•• The
Disc or tape may be full.
No Service
• The broadcaster has stopped the service.
On screen messages
Frequently Asked Questions
• •
All tuning data will be erased
FAQs, etc.
55
On screen messages
Message
Meaning / Action
No Signal
• Check the connection of the RF cable.
PIN incorrect !
• The PIN number you entered is wrong.
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
follow the message.
• Please
If it is still failed, consult your local Panasonic dealer.
Please check settings and connections on
HDMI devices.
• Communication error in VIERA Link function (p. 44).
Please wait.
• A function is in progress.
Recording this service now
recorder is recording the programme signal from its own tuner.
• The
You can turn the TV off and leave the equipment recording in the
normal way.
56
Sending Preset Data Please wait !
• Q-Link or VIERA Link programme download is in progress.
Shipping condition completed.
TV can now be switched off.
Setup” will automatically start when Mains power On / Off
• “Auto
switch is next turned On. (p. 10)
Software successfully updated
Press EXIT to continue
• The software updating is nished.
Software Update failed. Please try again later.
Press EXIT to continue
“System Update Search Now” in System Update (p. 29).
• Perform
If this is still unsuccessful, there may not be any new software
This service is locked !
Press OK to enter PIN
• The selected programme is locked in Child Lock (p. 31).
Timer already expired !
time in Timer Programming is already past. Set correctly
• Starting
(p. 39).
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
message will appear 2 minutes before timer programming
• This
event due to start.
Timer incorrect !
• Set Start and End times in Timer Programming correctly (p. 39).
Tuner Locked
Please stop recording to operate
want to unlock, cancel Direct TV Recording (p. 43 and p. 45)
• Iforyou
Timer Programming (p. 38).
Unable to download, Check Equipment
• The tape or disc is active. Stop the equipment and try again.
available.
Glossary
DVB
Digital Video Broadcasting
DVD
Digital Versatile Disc
DVI
Digital Visual Interface
EPG
Electronic Programme Guide
HDMI
High-Denition Multimedia Interface
NTSC
National Television System Committee
One of the television signals used in USA, etc.
RF
Radio Frequency - Signal received from terrestrial
aerial
RGB / S-Video / Video
Choose between these three video formats
depending on personal preference and equipment
requirement
(RGB - Red, Green and Blue)
SCART
21 pin connection used for video, audio and
switching signals (Also known as Euro SCART and
Peritel)
VCR
Video Cassette Recorder
Licence
•
•
•
•
http://www.europe.guideplus.com/
•
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY
LIABLE FOR THE ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE
PLUS+ SYSTEM. IN NO EVENT SHALL GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED
AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR
INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE
OF ANY INFORMATION, EQUIPMENT, OR SERVICES RELATING TO THE GUIDE PLUS+ SYSTEM.
Glossary
Licence
On screen messages
••
•
•
•
•
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).
VGA is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Inc., USA.
S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
SDHC Logo is a trademark.
HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.
GUIDE Plus+ is (1) a registered trademark or trademark of, (2) manufactured under license from and (3)
subject of various international patents and patent applications owned by, or licensed to, Gemstar-TV Guide
International, Inc. and/or its related afliates.
FAQs, etc.
57
Index
A Accessories ·····································································6
Add New DVB Services ··················································33
Analogue Manual Tuning···············································33
Aspect ·····································································14, 50
Audio Description ····················································13, 24
Auto Setup·······························································10, 33
AV1 / AV2 out···························································25, 43
B Banner Display Timeout ················································25
C Category list ··································································18
Child Lock······································································31
CI module ······································································29
Clamper ···········································································6
COMPONENT ·························································48, 52
Connection ··························································8, 42, 48
D Direct TV Recording ················································43, 45
Download to equipment···········································10, 25
D-sub 15-pin ··································································52
DVB Manual Tuning ······················································33
DVB Profile Edit·····························································30
DVB Settings ·································································28
DVB Signal Condition ····················································33
DVI ················································································50
DVDs ·········································································8, 20
E EPG ···············································································18
External equipment ·············································8, 20, 48
External input ··························································20, 37
Event recording ·····························································19
F FAQs ·······································································53, 54
Free input menu ····························································23
G GUIDE Plus+ Settings ···················································25
H HDMI ········································································50-52
Hold ·········································································12, 17
Home Cinema ·························································42, 47
I Information banner ························································13
Optional accessories ·······················································6
Owner ID ·································································10, 35
P PAL ················································································59
PC ···········································································37, 52
Pedestal ··········································································6
Photo View ····································································40
Picture Overscan ···························································25
PIN number ·······················································10, 31, 35
P-NR··············································································24
Power LED ································································7, 10
Q Q-Link ································································25, 42, 43
Quick Start Guide ······················································· 6-11
R Remote control ····························································6, 7
Reset to Default·····························································24
RGB···············································································59
S Sales and Support Information ······································60
Satellite receiver ··················································9, 20, 48
SCART ································································8, 42, 51
SD Card···································································40, 51
Shipping Condition ························································34
Slide show ·····································································41
Specifications ································································59
Split Programme····························································19
Subtitles···································································12, 17
Surround········································································24
S-Video ····································································48, 51
System Update ························································29, 51
T Teletext ·····································································15-17
Timer LED ···························································7, 19, 39
Timer Programming ·······················································38
Tuning Menu··································································32
TV Guide ·······································································18
TV speaker ····································································47
Type list ·········································································18
Input Labels ···································································36
Input signal ····································································52
U Update the software··················································29, 51
L Licence ··········································································57
V Video ·······································································20, 48
M Mains Lead ······································································8
VIERA Link ·························································42, 44-47
Viewing Mode ································································24
Volume Correction ·························································24
Mains power On / Off switch ·····································7, 10
Maintenance ····································································5
Menu Functions ························································22-27
Mode ·············································································24
Multi Audio········································································· 13
N New Service Message···················································33
NICAM ···········································································24
NTSC·······································································26, 59
58
O Off Timer ··································································14, 25
User input ······································································36
W WSS ··············································································50
Z Zoom ·············································································14
Specications
TX-32LXD80
Power Source
AC 220-240 V, 50 Hz
Power
Display
Consumption panel
Sound
Average use
130 W
Standby condition
1 W (Without monitor out recording)
17 W (With monitor out recording)
Aspect Ratio
16:9
80 cm (diagonal)
697 mm (W) × 392 mm (H)
1,049,088 (1,366 (W) × 768 (H))
160 mm × 42 mm × 2 pcs, 8 :
20 W (10 W + 10 W), 10% THD
M3 (3.5 mm) stereo mini Jack × 1
VGA, SVGA, XGA
SXGA ······ (compressed)
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
PAL I
: UHF E21-68
PAL 525/60 : Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc
playback from DVD player and recorder.
DVB
: Digital terrestrial services via UHF aerial input.
M.NTSC : Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only) : Playback from NTSC Video recorders (VCR).
UHF
Temperature : 0 °C - 35 °C
Humidity
: 20 % - 80 % RH (non-condensing)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
RCA PIN Type × 1
1.0 V[p-p] (75 :)
Mini DIN 4-pin
Y:1.0 V[p-p] (75 :) C:0.286 V[p-p] (75 :)
RCA PIN Type × 2
0.5 V[rms]
Y
1.0 V[p-p] (including synchronization)
PB, PR
±0.35 V[p-p]
RCA PIN Type × 2
0.5 V[rms]
TYPE A Connectors
This TV supports “HDAVI Control 3” function.
HIGH-DENSITY D-SUB 15PIN
R,G,B/0.7 V[p-p] (75 :)
HD, VD/TTL Level 2.0 - 5.0 V[p-p] (high impedance)
SD Card slot × 1
RCA PIN Type × 2
0.5 V[rms] (high impedance)
820 mm × 573 mm × 250 mm (With Pedestal)
820 mm × 535 mm × 110 mm (TV only)
17 kg Net (With Pedestal)
14 kg Net (TV only)
Visible screen size
Number of pixels
Speaker
Audio Output
Headphones
PC signals
Receiving Systems /
Band name
Aerial - Rear
Operating Conditions
Connection Terminals
AV1 (Scart terminal)
AV2 (Scart terminal)
VIDEO
AV3
S-VIDEO
AUDIO L - R
COMPONENT
VIDEO
AUDIO L - R
HDMI1 / 2 / 3
Others
PC
Output
Card slot
AUDIO L - R
Dimensions ( W × H × D )
Mass
Specications
Index
Note
Design and Specications are subject to change without notice. Mass and Dimensions shown are approximate.
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024.
• •
••
•
FAQs, etc.
59
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
0844 844 3852
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TX-32LXD80 Declaration of Conformity No. 5438, 31 January 2008
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identication in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
Panasonic (U. K.) Ltd.
Willoughby Road, Bracknell, Berks RG12 8FP Web Site : http://www.panasonic-europe.com
¤ 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in Czech Republic