advertisement
13.56 MHz
Physical Access
Contactless Technology
How to Order Guide
D00529, Release E.0
February 2012
The most current version of this document is available for download at: http://www.hidglobal.com/documents/1356mhz_htog_en.pdf
To check order status go to: http://www.hidglobal.com > Knowledge Center > Customer Support > Customer Order Status.
For Contact cards, 3
rd
Party Contact-Chips and embeddable cards with or without contact chip, see the Logical Access How to Order Guide .
For Embedded products, see the Embedded How to Order Guide .
HID, HID Global, iCLASS, SmartID, OEM75, FlexSmart and eProx are the trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries.
This document is subject to change without notice.
13.56 MHz How to Order Guide – D00529, E.0
Document History
Date
2/16/12
1/24/11
9/26/11
4/29/11
02/23/11
11/17/10
10/26/10
09/07/10
Author
SA
SA
DD, SA
Description
Update description for 232/242 and 252/262
Version
E.0
Updated 1450/1456 and 1451/1457 adding note regarding 4K memory size D.9
Added D.8
- HADP Configurations
- 23 = Buffer one to 11 Keys for Keypad Readers
- Universal Power Supply – Indala ProxSmith iCLASS SE (SIO-Enabled) Card Overview Changed
- RK40 & RPK40 from Rev B to C
- 232/242 iCLASS / Other HF Combination Card
- 256/262 iCLASS / Other 13.56MHz / Prox Combination Card
- Credentials option page refinements
Removed
- Alternate configuration options (HID DESFire)
Added Programming Platform Ordering Guide, removed 2210-0305 DN
Magnetic Read Head Replacement from Accessories
DD, LD, KB Added
- 232, 242, 252 and 262 Combination Cards
- EV1 / MIFARE readers
- Removed references to HADP
- RPK40 – changed from Rev A to C
DD, LD
DD
DD
- Added 6220 / 6225 (RM40/RMP40) readers
- High Frequency Migration Readers – added alternative configuration options
- iCLASS / multiCLASS Rijkspas Compliant Read-Only and OSDP Readers
- Reader Wiegand Output – Changed model numbers
- Removed SmartTOUCH Biometric Readers
- Removed MIFARE Reader Wiegand
- EdgeReader Solo ESR40 – changed from Rev A to B
- 13.56 MHz Accessories
- multiCLASS US Government FIPS201 w/Magstripe Ordering Page – added non-G3.0 Wiegand options. Changed RPK40 – FIPS201 from B to A revision.
- EM4102 Format – update footnotes 3 and 4
- multiCLASS Magstripe Ordering Page
- multiCLASS US Government FIPS201 w/Magstripe Ordering Page
Revised MIFARE DESFire EV1 Ordering
D.7
D.6
D.5
D.4
D.3
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 2 of 70
13.56 MHz How to Order Guide – D00529, E.0
Contents
1451/1457 – Combination (MIFARE
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 3 of 70
13.56 MHz How to Order Guide – D00529, E.0
Overview
Welcome to 13.56 MHz by HID. HID Global offers a variety of reader families that are compatible with most 13.56 MHz technologies existing in the market today. HID’s primary 13.56 MHz product lines include iCLASS ® and SmartID ® . iCLASS is the first advanced contactless smart card technology designed by and for the access control professional. iCLASS readers and cards offer your customer the highest quality card and reader system. The access control system is designed to both pass card data to an access control host, and perform read/write functionality in card non-access control areas.
SmartID is a highly customizable ISO14443 (MIFARE ® / DESFire ® ) reader platform enabling the dynamic application fit new and existing populations of custom defined card data structures. Customize authentication keys, communication encryption, data location and length, data output and much more.
Making it easy for you to offer your customers exciting new products with enhanced benefits, HID has prepared this 13.56 MHz
How to Order Guide.
This How to Order Guide provides information for:
• 13.56 MHz reader and module products
• 13.56 MHz credentials iCLASS Reader Identifiers
The alpha designator within the product model indicates whether the reader is:
• READ ONLY (R)
• READ/WRITE (RW)
• READ ONLY/PROXIMITY (RP)
• READ ONLY WITH KEYPAD (RK)
• READ ONLY WITH KEYPAD/PROXIMITY (RPK)
• READ/WRITE WITH KEYPAD (RWK)
• READ ONLY WITH KEYPAD/LCD (RKL)
• READ/WRITE WITH KEYPAD/LCD (RWKL)
• READ ONLY WITH KEYPAD/LCD/BIOMETRICS (RKLB)
• READ/WRITE WITH KEYPAD/LCD/BIOMETRICS (RWKLB)
• READ ONLY WITH MAGNETIC (RM)
• READ ONLY WITH MAGNETIC/PROX (RMP)
• READ ONLY WITH MAGNETIC/KEYPAD (RMK)
• READ ONLY WITH MAGNETIC/PROX/KEYPAD (RMPK)
• READ ONLY WITH EV1 & MIFARE CLASSIC CAPABILITY (RS)
• READ ONLY WITH EV1 & MIFARE CLASSIC/PROX CAPABILITY (RSP)
• READ ONLY WITH EV1 & MIFARE CLASSIC/KEYPAD CAPABILITY (RSK)
• READ ONLY WITH EV1 & MIFARE CLASSIC/PROX/KEYPAD CAPABILITY (RSPK)
SmartID Reader Identifiers
The alpha designator indicates whether the reader is:
• READ ONLY (S)
• READ ONLY/PROXIMITY (SP)
• READ ONLY WITH KEYPAD (SK)
• READ ONLY WITH KEYPAD/PROXIMITY (SPK)
The following numeric designator signifies the physical size of the unit. (The smaller the number, the physically smaller the unit.)
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 4 of 70
13.56 MHz How to Order Guide – D00529, E.0
13.56 MHz Reader iCLASS Read Only Readers
When your application requires the ability to read card numbers and output data using the standard Wiegand or
Clock and Data protocols, use a read only (R series) iCLASS product.
R10 - Physically the smallest reader, the R10 is ideal for mullion mounted door installations. The R10 will read HID card formats from iCLASS cards, or the card serial number (CSN) from a MIFARE card, and delivers the information to an existing access control panel using industry standard Wiegand protocol.
R15 - The R15 is ideal for mullion mounted door installations. The R15 will read HID card formats from iCLASS cards, or the card serial number (CSN) from a MIFARE card. Delivering the information to an existing access control panel, the R15 uses industry standard Wiegand protocol.
R30 - This 8.5 cm (3.3”) square reader is designed to mount to and cover standard EU and APAC back
boxes. This reader has the same read only abilities as the R10 with the added features of a longer read range and built-in tamper magnet.
R40 - The R40 is designed to mount and cover single gang switch boxes primarily used in the United
States and includes a slotted mounting plate for European and Asian back box spacing. It contains all the features of the R30 and offers longer read range. iCLASS Keypad Readers
RK40 - This reader is the same size and shape as the R40. The 12-position weatherproof keypad features vandal-resistant metal keycaps and backlit numbering. The RK40 supports dual authentication of identity by combining card presentation and entry of a PIN. The PIN can be verified either at the access control panel or locally by the keypad reader. When verified locally, the PIN must be programmed into the iCLASS Card.
RKL55 / RWKL550 – This LCD/Keypad reader allows for dual-factor authentication in addition to user messages displayed on an LCD screen. The reader is designed to fit on a single gang switch box for US,
EU or APAC usage. The reader is available in read only or read/write configuration. iCLASS Multi-Technology Readers (multiCLASS ® )
RP15 - The RP15 reader simultaneously supports HID and AWID or Indala proximity, iCLASS, MIFARE
(CSN), and HID multi-technology credentials. The RP15 is ideal for mullion mounted door installations.
RP40 - The RP40 reader simultaneously supports HID and AWID or Indala proximity, iCLASS, MIFARE
(CSN), and HID multi-technology credentials. The RP40's mounting plate attaches to US, EU or APAC
back boxes with 52-60 mm screw hole spacing (vertical or horizontal), or to any flat surface. The reader body snaps onto the mounting plate and the cover snaps over the reader body, and then secured with a screw.
RPK40 – The RPK40 simultaneously supports HID and AWID or Indala proximity, iCLASS, MIFARE (CSN), and HID multi-technology credentials. Additionally, the RPK40 supports dual factor authentication of identity by combining card presentation and PIN entry. Either verify the PIN at the access control panel or locally by the keypad reader. When verified locally, program the PIN into the iCLASS Card. The RPK40's mounting plate attaches to US, EU or APAC back boxes with 52-60 mm screw hole spacing (vertical or horizontal), or to any flat surface. The reader body snaps onto the mounting plate and the cover snaps over the reader body, and then secured with a screw. iCLASS Multi-Technology Readers with Magnetic Swipe Reader (multiCLASS)
All magnetic swipe multiCLASS readers consist of two-pieces including cover/electronics and mounting plate. The mounting plate has a built-in vertical swipe magnetic reader. Mount the magnetic swipe to the reader left or right. Mounting plate attaches to U.S. back box, 52-60 mm screw hole spacing (vertical or horizontal), or to any flat surface. Reader cover/electronics is secured to the mounting plate with a security screw. After the magnetic card migration has completed, increase security by replacing the built-in vertical swipe magnetic reader mounting plate with a standard mounting plate.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 5 of 70
13.56 MHz How to Order Guide – D00529, E.0
RMK40 – The RMK40 simultaneously supports magnetic stripe, iCLASS, and HID multi-technology credentials. Additionally, the RMK40 supports dual factor authentication of identity by combining card presentation and PIN entry. Either verify the PIN at the access control panel or locally by the keypad reader using specially enrolled iCLASS credentials.
RMPK40 – The RMPK40 simultaneously supports magnetic stripe, Genuine HID Prox, AWID Prox, iCLASS, and HID multi-technology credentials. Additionally, the RMPK40 supports dual factor authentication of identity by combining card presentation and PIN entry. Either verify the PIN at the access control panel or locally by the keypad reader using specially enrolled iCLASS credentials. iCLASS Biometric Readers (bioCLASS ™ )
RLB57 / RWKLB575 – This biometric LCD/Keypad reader allows for three-factor authentication using biometric finger authentication, keypad and card. User messages are displayed on an LCD screen. The reader is designed to fit on a single gang switch box for US, EU or APAC usage. The reader is available in read only or read/write configuration. iCLASS Long Range Readers
R90 - The R90 is the largest size (12” or 30.5 cm square) and longest read range iCLASS contactless smart card reader in the iCLASS product line. The R90 will read HID card formats from iCLASS cards, delivering the information to an access control panel using industry standard Wiegand protocol. iCLASS Reader/Writers
When your application requires the ability to read and write data to the card, use a read/write (RW series) iCLASS product. The four standard iCLASS reader/writers are:
RW100 - Physically the smallest reader/writer, the RW100 is ideal for mullion mounted door installations.
The RW100 contains all the features of the R10, with the added features of read/write capability via RS232,
RS485, UART or USB.
RW150 - The RW150 is ideal for mullion mounted door installations. The RW150 contains all the features of the R10, with the added features of read/write capability via RS232, RS485, UART or USB.
RW300 - This 80 mm (3.15”) square reader is designed to mount to and cover standard EU and APAC
back boxes. The RW300 contains all the features of the R30, with the added features of read/write capability via RS232, RS485, UART or USB.
RW400 - The RW400 is designed to mount to and cover single gang switch boxes primarily used in the
US. The RW400 contains all the features of the R40, with the added features of read/write capability via
RS232, RS485, UART or USB.
RWK400 - This reader/writer offers the same features as the RK40, with the extended ability to read/write user data to iCLASS credentials via RS-232, RS485, UART or USB.
SmartID Readers
S10 – The S10 is ideal for mullion mounted door installations. Reading MIFARE (sector) or DESFire
(application/file),card data, the S10 delivers the card data to an access control system using industry standard protocols, including Wiegand. Mount the reader on a single gang switch box for US, EU or
APAC usage by ordering an additional mounting accessory.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 6 of 70
13.56 MHz How to Order Guide – D00529, E.0
SmartID Keypad Readers
SK10 - The SK10 is ideal for mullion mounted door installations. The SK10 offers dual-factor authentication using keypad and card. Reading MIFARE (sector) or DESFire (application/file) card data, the
SK10 delivers the card data to an access control system using industry standard protocols, including
Wiegand. The reader can be mounted on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory.
SmartID Multi-Technology Readers (SmartTRANS)
SP10 - The SP10 is ideal for mullion mounted door installations. The SP10 reads either 125 kHz HID Prox and AWID card formats in addition to MIFARE (sector) or DESFire (application/file) card data. The SP10 delivers the card data to an access control system using industry standard protocols, including Wiegand.
Mount the SP10 on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory.
SPK10 - The SPK10 is ideal for mullion mounted door installations. The SPK10 offers dual-factor authentication using keypad and card. The SPK10 reads either 125 kHz HID Prox and AWID card formats in addition to MIFARE (sector) or DESFire (application/file) card data. The reader will deliver the card data to an access control system using industry standard protocols including Wiegand. Mount the reader on a
single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory.
SmartID Biometric Readers (SmartTOUCH)
SB10 / SBK10 – This biometric reader comes with or without keypad and offers three-factor authentication using biometric finger authentication, keypad and card. The reader is designed for a mullion mount, but mount the biometric reader on a single gang switch box for US, EU or APAC usage by ordering an additional mounting accessory.
SmartID Reader/Writers
SW100 – The SW100 is ideal for mullion mounted door installations. Read/Write application supports
T=CL (or legacy 3964) bi-directional serial protocol implemented over RS232, RS485 or RS422 physical link. Enables read/write to MIFARE and ISO14443-4 credentials (DESFire, SmartMX).
SWK100 – The SWK100 is ideal for mullion mounted door installations. Read/Write application supports
T=CL (or legacy 3964) bi-directional serial protocol implemented over RS232, RS485 or RS422 physical link. Enables read/write to MIFARE and ISO14443-4 credentials (DESFire, SmartMX).
SWD100 – Desktop reader/writer connects to a computer through a USB or RS232. The hosts send commands to SWD100 in order to read/write data to MIFARE, DESFire and any other ISO14443-4 card through T=CL (RS232) or PC/SC (USB Only) protocols.
SmartID Programmer (SmartTOOLS)
SmartTOOLS is a card programming software suite providing custom access cards and configuration card programming of MIFARE cards.
ProxBurn is an access card programming component of SmartTOOLS. ProxBurn programs custom MIFARE cards for use on SmartID access control readers. The ProxBurn package includes a CD with software application and manuals, RS232 cable and SWD100 with RS232 interface.
ReaderTOOLS is a configuration card programming component of SmartTOOLS. ReaderTOOLS creates configuration cards configuring SmartID readers to perform custom access control applications against existing and new card populations with custom requirements. The ReaderTOOLS package includes a CD with software application and manuals, USB cable and SWD100 with USB interface.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 7 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Credentials
HID offers a full line of iCLASS credentials. When choosing a credential, there are several important decision points:
1. Which form factor (for example, card, key or tag) of credential best meets my needs?
2. Do I have a heavy duty card application or will I be laminating a patch to the card, which will require a composite card for best results?
3. Do I need a multi-technology credential (for example, iCLASS and proximity or iCLASS and Wiegand)
to help leverage investments in existing access control systems while transitioning to new
technologies or applications?
4. How much memory do I need (for example, 2k bits, 16k bits or 32k bits)?
5. How many application areas (2 or up to 16) do I need?
To help simplify the purchase of iCLASS credentials, all credentials are delivered pre-personalized with the default memory allocation and protection for the access control application. Within the part number, the numeric model number defines the technology, number of application areas and memory size.
All credentials come in two memory sizes, 2k bits (256 Bytes) with two application areas or 16k bits (2k Bytes) with two or sixteen application areas or 32k bits (4k Bytes) in two separate books. Application Area 1 is reserved by HID for access control use. The remaining application areas can be defined. Review the HID Application Note # 28 for more information about memory size and application areas.
Credentials are available in several form factors. You may request the correct memory size and/or application area configuration on any form factor. The form factor is not limiting. Offered form factors include:
iCLASS Clamshell cards – iCLASS Clamshell cards offer single-coil, read/write 13.56 MHz contactless smart card technology in a value-priced and highly-durable, molded ABS shell with customizable PVC label.
The card is available in the 2k bit (256 byte) memory size only.
iCLASS Cards – Standard, 13.56 MHz single-coil, iCLASS cards will be manufactured to meet ISO standard dimensions. Personalize these cards by adding a photo ID, or barcode (These cards are also available with an optional magnetic stripe). For the iCLASS embeddable card, see the Logical Access How to Order Guide .
iCLASS SE (SIO-Enabled) – Extension of regular iCLASS Card with higher security. Refer to the iCLASS
SE How to Order Guide
iCLASS Prox Cards – iCLASS Prox cards offer a dual technology solution (13.56 MHz contactless smart card technology and 125 kHz proximity technology) in a single card. Personalize these cards by adding a photo ID, or barcode (These cards are also available with an optional magnetic stripe). For the iCLASS
Prox embeddable card, see the Logical Access How to Order Guide .
iCLASS Wiegand Cards – iCLASS Wiegand cards offer a dual technology solution (13.56 MHz contactless smart card technology and Wiegand strip technology) in a single card. Personalize these cards by adding a photo ID, or barcode (These cards are also available with an optional magnetic stripe).
iCLASS Key II – To enhance the read range and overall performance of the iCLASS key fob, the iCLASS
Key has been redesigned. The iCLASS Key II has a solid black case with a blue molded plastic HID insert.
The iCLASS Key II was designed to fit on your existing key ring or used with a standard badge-clip.
iCLASS Tags – An adhesive tag can be placed onto an existing credential to allow for an easy transition from legacy technologies to iCLASS . The tag can also be placed onto any non-metallic object. However,
HID recommends that every application be tested before purchase to ensure compatibility.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 8 of 70
13.56 MHz How to Order Guide – D00529, E.0
Basics of Ordering iCLASS Contactless Smart Credentials
Each part number consists of a base number, to indicate the type of credential, and a number or letter to indicate each credential option. Each credential has a standard part number which includes default options, as indicated on the attached credential guides. When an order is placed for a credential, the base number and all options must be specified. If you require any options that are different from the default options, you must also indicate those options at the time the order is placed. All part numbers must be complete to be accepted by HID’s order entry system.
All reader orders must have the following information:
• BASE MODEL NUMBER
• STYLE
• READ RANGE
• TYPE
• COLOR
• OUTPUT FORMAT (reader’s format or format number must also be given at time of order)
All credential orders must have the following information:
• Base Part Number - Indicates type of credential
•
Standard PVC
•
Composite 40% Polyester/PVC (Recommended for long life applications or when applying an over-laminate)
• Memory Size and Allocation -
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
• Programming - Indicates whether the credential is programmed at the factory by HID or programmed by you with an HID
iCLASS card programmer. If the credential is ordered non-programmed, an HID iCLASS card programmer must be used for
programming. (Contact an HID sales representative for iCLASS card programmer eligibility).
• Front Packaging - Indicates standard or custom artwork and type of finish.
• Back Packaging - Indicates standard or custom artwork and type of finish.
• iCLASS Credential Numbering - Internal 13.56 MHz programmed number and visible external credential number.
• Slot Punch
• Optional 125 kHz Proximity or Wiegand Credential Numbering - Internal 125 kHz Proximity or Wiegand programmed
number and visible external credential number.
All orders for custom artwork credentials must have the following information:
• Custom Artwork Number (Call your Customer Service Representative if number is not available)
In addition, all credential orders must have the following programming information:
• Bit Format(s)
• Facility Code(s)
• Internal and External Start Numbers
• Internal PIN Code (Length: 2 – 12 Digits)
• iCLASS Elite Programming Information (If Applicable)
• Any Special Instructions
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 9 of 70
13.56 MHz How to Order Guide – D00529, E.0
Credentials
200/210 - iCLASS Card Ordering Guide
The iCLASS contactless smart card offers read/write capability. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 200 Standard PVC 210 Composite 40% Polyester / PVC* iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS.
Specify Programming Information.
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
1 - Plain White with Gloss Finish with Magnetic Stripe 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1
Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
Slot Punch 5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
B - No Slot Punch - Horizontal Punch compatible (Printed location of Vertical and
Horizontal slot punch will remain). 6
H - Horizontal Slot Punch 6
Back Packaging
Front Packaging
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from check boxes above. Example: 2001CGGNN
Final Part Number - (Options #)
iCLASS Card Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code . iCLASS Elite ICE Number (if applicable) -
.
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
PIN (2-12 digits) : Sequential: Start # Random: Length .
Special Instructions: .
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. placed in the bottom right-hand corner on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
5
3 antenna design. Users can expect a read range reduction of approximately 20% if they order options B or H for the Slot Punch. * The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
The external card number is
Cards are provided with an optional
6 The ability to add a horizontal slot punch requires a different iCLASS
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 10 of 70
13.56 MHz How to Order Guide – D00529, E.0
202/212 - Combination Card (iCLASS / Prox) Ordering Guide
The iCLASS Prox contactless smart card offers read/write and HID proximity capability in a single card. Add new applications while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 202 Standard PVC 212 Composite 40% Polyester / PVC * iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1 iCLASS Programming (Check One)
C - Configured, Non-Programmed iCLASS & initialized 125 kHz Proximity.
Programming Information Not Required.
A - Configured, Non-Programmed iCLASS, Programmed 125 kHz Proximity.
Specify Programming Information.
P - Programmed iCLASS only and Prox initialized.
Specify Programming Information.
B - Programmed 125 kHz Proximity and iCLASS. Specify Programming Information -
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
Back Packaging (Check One)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
G - Plain White with Gloss Finish 2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
1 - Plain White with Gloss Finish with Magnetic Stripe 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1
iCLASS Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
Slot Punch 5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
Front Packaging
Back Packaging
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
125 kHz Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
4
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2022LGGNNM
- (Options #) Final Part Number iCLASS Programming Information 125 kHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
iCLASS Elite ICE Number (if applicable) - .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
PIN: Sequential: Start # Random: Length .
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small “HID logo” " placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 11 of 70
13.56 MHz How to Order Guide – D00529, E.0
204 - iCLASS Wiegand Card Ordering Guide
The iCLASS Wiegand contactless smart card offers read/write and Wiegand strip capability in a single card. Add new applications and/or use a
transition card during upgrades from Wiegand to iCLASS.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 204 Standard PVC iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS.
Specify Programming Information.
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
1 - Plain White with Gloss Finish with Magnetic Stripe 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe –
Specify Custom Artwork Number 1
iCLASS Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
Front Packaging
Back Packaging
Slot Punch 5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
Wiegand Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External
(Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External
(Laser Engraved) 4
Wiegand Style & Bit - Number of Bits in Code Strip ( XX = Bit # between 8 and 44) (Check One)
XXA1 - Strip toward left edge of card
XXA - Strip toward right edge of card
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 2042PGGMNM26A1
Final Part Number 204 - (Options #) iCLASS Programming Information Wiegand Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
iCLASS Elite ICE Number (If Applicable) .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Bit Numbers . (example: 26 bit)
Format Number (example: CC2601)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
PIN: Sequential: Start # Random: Length .
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for Wiegand on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 12 of 70
13.56 MHz How to Order Guide – D00529, E.0
205 - iCLASS Key Ordering Guide
The iCLASS contactless smart Key offers read/write capability. Attach to a key ring or badge clip for convenient use.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
205 Base Model iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS.
Specify Programming Information.
.24 in
Front Packaging
N – iCLASS Key II - Black with blue insert. Includes HID Standard Artwork
Back Packaging
N - None
Key Numbering 1
M - Sequential Matching Internal/External (Inkjetted)
N - No External Key Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved) 2
B - Sequential Internal/Sequential Non-Matching External (Engraved) 2
C - Random Internal/Non-Matching Sequential External (Engraved) 2
Additional Options 3
N - None
[6 mm]
1. 25 in [31.75 mm]
Shown – Front Packaging Option N
Enter your final card options from the above selections. Example: 2052PNNMN
Final Part Number 205 N N N
iCLASS Key Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code . iCLASS Elite Ice Number (if applicable)
.
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
PIN: Sequential: Start # Random: Length .
Special Instructions: .
1
2
The external key number is placed on the back of the key.
3
For Laser Engraved external numbers, consult factory for lead times and cost.
Key Ring sold separately (Part Number: 57-0001-02) .
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 13 of 70
13.56 MHz How to Order Guide – D00529, E.0
206 - iCLASS Tag Ordering Guide
The iCLASS contactless smart Tag offers read/write capability. iCLASS enable existing credentials or non-metallic devices such as cell phones or PDAs by adhering the iCLASS Tag.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
206 Base Model Part Number Worksheet iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS.
Specify Programming Information.
Front Packaging (Check One)
S - Gray with HID Standard Artwork
K - Black with HID Standard Artwork
C - Custom Artwork – Specify Custom Artwork Number 2
Back Packaging
S - Adhesive Backing
Tag Numbering 1 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Tag Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
Slot Punch
N - None
Front Packaging
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final Tag options from check boxes above. Example: 2062CSSNN
Final Part Number 206 S N - (Options #)
iCLASS Tag Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code . iCLASS Elite ICE Number (if applicable) -
.
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
PIN: Sequential: Start # Random: Length .
Special Instructions: .
1 The external tag number is placed on the back of the tag. 2 For new artwork files, contact Customer
Service for custom artwork number, lead-times, minimum order quantities, and cost. 3 The iCLASS
Tag is not for use on cards that use full insertion or tractor feed type readers.
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices, HID does not claim that the iCLASS Tag will work in every situation.
Functional and non-functional iCLASS Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 14 of 70
13.56 MHz How to Order Guide – D00529, E.0
208 - iCLASS Clamshell Card Ordering Guide
The iCLASS contactless smart card offers read/write capability.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
208 Base Model iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS.
Specify Programming Information.
Front Packaging (Check One)
M - Plain White Vinyl with Matte Finish
G - Plain White with Gloss Finish
A - iCLASS Clamshell - Adhesive Front 1
C - Custom Artwork - Specify Custom Artwork Number 2
Back Packaging (Check One)
S - Base with Molded HID Logo
C - Custom Artwork - Specify Custom Artwork Number 2
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
Slot Punch 5 (Check One)
V - Vertical Slot Punch
(Cover)
Front Packaging
Option - Custom Artwork 2
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
(Base)
Back Packaging
Enter your final card options from check boxes above. Example: 2080PGSMV
Final Part Number 208 0 V - (Options #)
iCLASS Card Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code . iCLASS Elite ICE Number (if applicable)
.
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
PIN (2-12 digits): Sequential: Start # Random: Length .
Special Instructions: .
1 The part numbers for non-adhesive labels to be used with the iCLASS Clamshell with the adhesive front are 1324GGN31 without slot and 1324GGV31 with slot.
2 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
3 The external card number is placed in the top left-hand corner on the back of the card. HID logo molded into base on back.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 15 of 70
13.56 MHz How to Order Guide – D00529, E.0
232 / 242 - iCLASS / Other HF - Combination Card Ordering Guide
The iCLASS with MIFARE or DESFire contactless smart card offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects. Add new applications while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 232 Standard PVC 242 Composite 40% Polyester / PVC * iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Card Programming (Check One)
B - Programmed iCLASS & 2 nd
Technology
. Specify Programming Information –
P - Programmed iCLASS only not 2 nd Technology.
Specify Programming Information.
C - Configured, Non-Programmed iCLASS . Non-programmed 2 nd Technology.
Programming Information Not Required.
A - Configured, Non-Programmed iCLASS, Programmed 2 nd Technology. Specify Programming Information.
2 nd High Frequency Technology (Check One)
M – MIFARE 1K Bytes (only available with iCLASS 2k bits)
N – MIFARE 4K Bytes
K – DESFire EV1 8K Bytes
12345 = Card ID Number
Front Packaging
Front Packaging (Check One) YYYYYYYY-YY = Sales Order Number
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
1 - Plain White with Gloss Finish with Magnetic Stripe 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1
Back Packaging iCLASS Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
Slot Punch 5 (Check One)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
(IMPORTANT – Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a lanyard or badge clip).
N - No Slot Punch
2 nd 3 High Frequency Technology Card Numbering (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2324PNGGNNN
N - (Options #) Final Part Number iCLASS Programming Information 2 nd 13.56 MHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
iCLASS Elite ICE Number (if applicable)
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
PIN: Sequential: Start # Random: Length .
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 16 of 70
13.56 MHz How to Order Guide – D00529, E.0
252 / 262 - iCLASS / Other 13.56MHz / Prox - Combination Card Ordering Guide
The iCLASS with MIFARE or DESFire contactless smart card as well as HID Proximity offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects. Add new applications while leveraging your investment in existing access control systems.
Personalize the card with a photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 252 Standard PVC 262 Composite 40% Polyester / PVC * iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/
13.56 MHz Technology Card Programming (Check One)
B - Programmed iCLASS & 2 nd
Technology
P - Programmed iCLASS only not 2 nd
. Specify Programming Information –
Technology.
Specify Programming Information.
C - Configured, Non-Programmed iCLASS . Non-programmed 2 nd Technology. Programming Information Not Required.
A - Configured, Non-Programmed iCLASS, Programmed 2 nd Technology. Specify Programming Information.
2 nd High Frequency (13.56 MHz) Technology (Check One)
M – MIFARE 1K Bytes (only available with iCLASS 2k bits)
N – MIFARE 4K Bytes
K – DESFire EV1 8K Bytes
125 kHz Technology Card Programming (Check One)
P – “HID Prox” Programmed 125 kHz Technology. Specify Programming Information –
C – “Indala/Casi Prox” Programmed 125 kHz Technology. Specify Programming Information –
N – Initialized 125 kHz Technology. Programming Information Not Required
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Front Packaging
Back Packaging
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
1 - Plain White with Gloss Finish with Magnetic Stripe 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1
iCLASS Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
Slot Punch 5 (Check One)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
(IMPORTANT – Dual High Frequency credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a lanyard or badge clip).
N - No Slot Punch
2 nd 13.56 MHz Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
125 kHz Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
4
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2524PNGGNNN
Final Part Number N - (Options #)
Continued on the following page.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 17 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
iCLASS Elite ICE Number (if applicable)
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
PIN: Sequential: Start # Random: Length .
2 nd 13.56 MHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
125 kHz Programming Information
1
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
2
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the
4 card.
5
For Laser Engraved external numbers, consult factory for lead times and cost.
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 18 of 70
13.56 MHz How to Order Guide – D00529, E.0
1430/1440/1436/1446 – MIFARE
®
Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 1430 (1K) Standard PVC
Base Model 1436 (1K) Composite 40% Polyester / PVC *
1440 (4K) Standard PVC
1446 (4K) Composite Polyester 40% / PVC *
Programming (Check One)
M - Programmed, HID MIFARE 6 (Specify HID format, for example H10301).
N - Non-Programmed (13.56 MHz ) 6 . Programming Information Not Required.
S - Custom Programmed, Specify Programming Information.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
S - Standard HID MIFARE Artwork 2
1 - Plain White with Gloss Finish with Magnetic Stripe 2
2 - Standard HID MIFARE Artwork with Magnetic Stripe
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1, 2
Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
U – UID (CSN) HEX card numbering only (Inkjetted)
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
Slot Punch 5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
Option - Custom Artwork 1
Front Packaging
Back Packaging
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1430NGGNN
Final Part Number -
(Options #)
13.56 MHz Card Programming Information
Bit Numbers
Facility Code
. (example: 26 bit) Format Number (example: H10301)
.
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
1
For Contact Smart Chip selection, refer to Logical Access How to Order guide. Standard configuration does not include a contact smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. with custom artwork, will still have a small “HID logo” "
2 Cards ordered with plain white front and back packaging, with no HID artwork or
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 32 Bit Serial number. * The composite construction is recommended for all cards with overlaminate applied.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 19 of 70
13.56 MHz How to Order Guide – D00529, E.0
1431/1441/1437/1447–Combination (MIFARE®/Prox) Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 1431 (1K) Standard PVC
Base Model 1437 (1K) Composite 40% Polyester / PVC *
1441 (4K) Standard PVC
1447 (4K) Composite 40% Polyester / PVC *
MIFARE Programming (Check One)
L - Programmed, (125 kHz only with HID Format)
M - Programmed, HID MIFARE 6
6 . Specify Programming Information.
(Specify HID format, for example H10301).
B - Programmed, (125kHz and 13.56 MHz with HID Format) 6 . Specify Programming Information.
N - Non-Programmed (125 kHz & 13.56 MHz without HID Format) 6 . Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only)
Specify Programming Information.
6 , Prox configured Specify Programming Information.
R - Custom Programmed , (125kHz and Custom 13.56 MHz with HID Format) 6 ,
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
S - Standard HID Proximity & MIFARE Artwork 2
1 - Plain White with Gloss Finish with Magnetic Stripe 2
2 - Standard HID MIFARE Artwork with Magnetic Stripe
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number 1, 2
125 kHz Proximity Card Numbering 3 (Check One)
1, 2
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Engraved)
C - Random Internal/Non-Matching Sequential External (Engraved) 4
4
Slot Punch 5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
13.56 MIFARE Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
U – UID (CSN) HEX card numbering only (Inkjetted)
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
Front Packaging
Back Packaging
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Engraved) 4
C - Random Internal/Non-Matching Sequential External (Engraved) 4
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1441NGGNNN
Final Part Number - (Options #)
13.56 MHz Programming Information 125 kHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
PIN: Sequential: Start # Random: Length . Special Instructions: .
For Contact Smart Chip selection, refer to Logical Access How to Order guide . Standard configuration does not include a contact smart chip module.
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom left-hand corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Proximity Programming only. 4 For Laser Engraved external numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 32 Bit Serial number.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 20 of 70
13.56 MHz How to Order Guide – D00529, E.0
1434/1444 – MIFARE
®
Keyfob Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 1434 (1K) 1444 (4K)
Programming (Check One)
M - Programmed, HID MIFARE 6 (Specify HID format, for example H10301).
N - Non-Programmed (13.56 MHz). Programming Information Not Required.
S - Custom Programmed, Specify Programming Information.
Front Packaging (Check One)
S - Standard HID Artwork
C - Custom Artwork - Specify Custom Artwork Number 1
Back Packaging
S - Standard
Key Numbering 1 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
Slot Punch 2
N - None
Enter your final Key options from check boxes above. Example: 1434NSSNN
Final Part Number S N
13.56 MHz Card Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
Special Instructions: .
1
The external key number is placed on the back of the key.
2
Key Ring sold separately (Part Number: 57-0001-02) .
3
Includes a permanent Unique MIFARE 32 Bit Serial number.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 21 of 70
13.56 MHz How to Order Guide – D00529, E.0
1435/1445 – MIFARE
®
Adhesive Tag Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 1435 (1K) 1445 (4K)
Programming (Check One)
M - Programmed, HID MIFARE 6 (Specify HID format, for example H10301).
N - Non-Programmed (13.56 MHz). Programming Information Not Required.
S - Custom Programmed, Specify Programming Information.
Front Packaging (Check One)
S - Standard HID Artwork
C - Custom Artwork - Specify Custom Artwork Number 1
Back Packaging
S - Standard
Tag Numbering 1 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
Slot Punch 2
N - None
Enter your final Tag options from check boxes above. Example: 1435NSSNN
Final Part Number S N
13.56 MHz Card Programming Information
Bit Numbers . (example: 26 bit) Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card # Start . Stop . External Card # Start . Stop .
Special Instructions: .
1
2
The external tag number is placed on the back of the tag.
3
For new artwork files, contact Customer Service for custom artwork number, lead-times, minimum order quantities, and cost.
4
The Tag is not for use on cards that use full insertion or tractor feed type readers.
Includes a permanent Unique MIFARE 32 Bit Serial number.
* Up to 1.14in (29mm) read range in free air.
Do not adhere to metal surfaces. Metal shields the RF, making the tag inoperable. Due to variations in cards and reading devices,
HID does not claim that the Tag will work in every situation. Functional and non-functional Tags are available for compatibility testing with existing credential and reader technologies. Compatibility should be confirmed prior to ordering.
* = Actual read range performance affected by mounting location, environment and the tags tuned resonant frequency.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 22 of 70
13.56 MHz How to Order Guide – D00529, E.0
1450/1456 – MIFARE
®
DESFire
®
EV1 Card Ordering Form Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 1450 Standard PVC 1456 Composite 40% Polyester / PVC *
DESFire EV1 Memory Size
If you are placing a re-order for a DESFire card based on the 0.6 version of the chip, you must omit this character from the part number. For example, for a non-programmed PVC card, the part number should be 1450N_____. In this case, you get a DESFire 0.6 with 4K Bytes memory.
C - 8K Bytes DESFire EV1
Programming (Check One)
N - Non-Programmed (13.56 MHz) 6 . Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only) 6 , Specify Programming Information.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
1 - Plain White with Gloss Finish with Magnetic Stripe 2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number 1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1, 2
Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved) 4
C - Random Internal/Non-Matching Sequential External (Laser Engraved) 4
Slot Punch 5
(IMPORTANT – MIFARE DESFire EV1 credentials do not allow a slot punch due to the antenna design, use a badge holder to attach this card to a lanyard or badge clip.)
N - No Slot Punch
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1450CNGGNN
Front Packaging
Back Packaging
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Final Part Number N -
(Options #)
13.56 MHz Card Programming Information
Bit Numbers
Facility Code
. (example: 26 bit) Format Number (example: H10301)
.
(Custom Formats) Site Code . City Code . OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Special Instructions: .
For Contact Smart Chip selection, refer to Logical Access How to Order guide. Standard configuration does not include a contact smart chip module.
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner on the back of the card on Proximity Format Programming only. Permanent Unique MIFARE 56 Bit serial # cannot be printed on cards. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 6 Includes a permanent Unique MIFARE 56 Bit Serial number. *
The composite construction is recommended for all cards with over-laminate applied.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 23 of 70
13.56 MHz How to Order Guide – D00529, E.0
1451/1457 – Combination (MIFARE
®
DESFire
®
EV1 / PROX) Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model 1451 Standard PVC 1457 Composite 40% Polyester / PVC *
MIFARE DESFire EV1 Memory Size
If you are placing a re-order for a DESFire card based on the 0.6 version of the chip, you must omit this character from the part number. For example, for a non-programmed PVC card, the part number should be 1450N_____. In this case, you get a DESFire 0.6 with 4K Bytes memory.
C - 8K Bytes MIFARE DESFire EV1
DESFire Programming (Check One)
L - Programmed, (125 kHz only) 6 . Specify Programming Information.
N - Non-Programmed (125 kHz & 13.56 MHz) 6 . Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only) 6 , Prox Configured Specify Programming Information.
R - Custom Programmed , (125kHz and Custom 13.56 MHz) 4, 6 , Specify Programming Information.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number 1
Back Packaging (Check One)
G - Plain White with Gloss Finish 2
1 - Plain White with Gloss Finish with Magnetic Stripe 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number 1, 2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number 1, 2
125 kHz Proximity Card Numbering 3 (Check One)
12345 = Card ID Number
Front Packaging
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Engraved) 4
C - Random Internal/Non-Matching Sequential External (Engraved) 4
Slot Punch 5
YYYYYYYY-YY = Sales Order Number
(IMPORTANT – MIFARE DESFire EV1 credentials do not allow a slot punch due to the antenna design use a badge holder to attach this card to a lanyard or badge clip.)
N - No Slot Punch
Back Packaging
13.56 DESFire Card Numbering 3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved) 4
B - Sequential Internal/Sequential Non-Matching External (Engraved) 4
C - Random Internal/Non-Matching Sequential External (Engraved) 4
Option - Custom Artwork 1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1457CNGGNNN
Final Part Number N - (Options #)
13.56 MHz Programming Information 125 kHz Programming Information
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
Bit Numbers . (example: 26 bit)
Format Number (example: H10301)
Facility Code .
(Custom Formats) Site Code . City Code .
OEM Code .
Internal Card No. Start . Stop .
External Card No. Start . Stop .
PIN: Sequential: Start # Random: Length . Special Instructions: .
For Contact Smart Chip selection, refer to the Logical Access How to Order guide.
Standard configuration does not include a contact smart chip module.
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom left-hand corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Proximity Programming only.
Permanent unique MIFARE 56 Bit serial # cannot be printed on cards. 4 For Laser Engraved external numbers, consult factory for lead times and cost..
Includes a permanent Unique MIFARE 56 Bit Serial number. * The composite construction is recommended for all cards with over-laminate applied.
5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering. 6
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 24 of 70
13.56 MHz How to Order Guide – D00529, E.0
FlexSmart to HID Credential Cross Reference
Old Indala Part
Number
New HID Part
Number
Description
MXISO
MXKEY
MXTAG
MXISO
MXKEY
MXTAG
DXISO
FPMXI
DXKEY
DXTAG
1430
1434
1435
1440
1444
1445
1450
1451
1454
1455
HID MIFARE Contactless Smart Card - Utilizes MIFARE 13.56 MHz
Internal Smart Chip, Standard S50, 1 K Memory with 16 Sectors
HID MIFARE Contactless Smart Keyfob - Utilizes MIFARE 13.56 MHz Internal
Smart Chip, Standard S50, 1 K Memory with 16 Sectors
HID MIFARE Contactless Smart Adhesive Tag - Utilizes MIFARE 13.56 MHz
Internal Smart Chip, Standard S50, 1 K Memory with 16 Sectors
HID MIFARE Contactless Smart Card - Utilizes MIFARE 13.56 MHz
Internal Smart Chip, Standard S70, 4 K Memory with 40 Sectors
HID MIFARE Contactless Smart Keyfob - Utilizes MIFARE 13.56 MHz Internal
Smart Chip, Standard S70, 4 K Memory with 40 Sectors
HID MIFARE Contactless Smart Adhesive Tag - Utilizes MIFARE 13.56 MHz
Internal Smart Chip, Standard S70, 4 K Memory with 40 Sectors
HID DESFire Contactless Smart Card - Utilizes DESFire 13.56 MHz
Internal Smart Chip, Standard D40, 4K memory with flexible file system
HID Combination DESFire/Prox Contactless Smart Card - Utilizes DESFire
13.56 MHz Internal Smart Chip, Standard D40, 4K memory with flexible file system
HID DESFire Contactless Smart Keyfob - Utilizes DESFire 13.56 MHz Internal
Smart Chip, Standard D40, 4K memory with flexible file system
HID DESFire Contactless Smart Adhesive Tag - Utilizes DESFire 13.56 MHz
Internal Smart Chip, Standard D40, 4K memory with flexible file system
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 25 of 70
13.56 MHz How to Order Guide – D00529, E.0
Custom Credentials
Artwork Checklist
Company Name:
Quantity:
PO No.
Card/Key/Tag and Artwork File No.
Minimum order quantity for Custom Artwork is 500 cards per order. Some Custom Artworks may be higher.
Minimum order quantity for Custom Artwork Tags/Keys is 10,000 tags per order.
Date
This form, accompanied with the “Custom Artwork placement and Inkjet Location Form”
MUST be filled out, SIGNED and returned to HID so that your order can be processed.
Credential Type: Standard PVC Cards or Keys/Tags
200 - iCLASS Card
206 - iCLASS Tag
1431/1441 - HID Proximity & MIFARE
1450 - HID DESFire ®
202 - iCLASS Prox Card
208 - iCLASS Clamshell Card
1434/1444 - HID MIFARE ® Keyfob
1451 - HID DESFire ® & Proximity
1454 - HID DESFire ® Keyfob 1455 - HID DESFire ® Tag
Credential Type: Composite PVC/Polyester 1 Cards
(Additional fee and longer lead-time)
204 - iCLASS Wiegand
1430/1440 - HID MIFARE ®
1435/1445 - HID MIFARE ® Tag
210 - iCLASS Card 212 - iCLASS Prox Card
1436/1446 - HID MIFARE 1437/1447 - HID Proximity & MIFARE
Artwork Placement, Font styles and Colors:
214 - iCLASS Wiegand
1456 - HID DESFire 1457 - HID DESFire & Proximity
Artwork Placement on Front Side of card
Artwork Placement on Back Side of card.
Font Style(s):
Front Side Colors:
Back Side Colors
Do you plan to print over or around the custom artwork with a dye sublimation printer? Yes No
“Surface” or “Laminated” Lithographic Printing ( Refer to the “Anti-Counterfeiting Descriptions” page in this guide for details)
Card Options:
Slot Punch 2,5 :
Signature Panel:
Front Card Finish:
Back Card Finish:
Yes
Yes
Gloss
Gloss
No Horizontal Vertical
No Size: .
Magnetic Stripe Coercivity: HID Standard (4000 OE) (2750 OE)
Magnetic Stripe Type: Standard 3 Track Debitek 1/8" Other: .
Anti-Counterfeiting Options:
Invisible Ink:
Micro-fine Print:
Hologram 7 :
Notes:
Red
Yes
Yellow Blue Green Glow in the Dark
No
Surface
1. Standard Composite Card is 25% Polyester and 75% PVC. A .035" thick card with 35% Polyester is also available. Contact Customer Service for details.
2. Some cards will have printed "indicators" on the back of the card to show the vertical slot punch location.
3. Some cards will have a small “HID logo” " " and reference number, custom artwork file number, and external number (optional) printed on the card.
4. Do not order slot punched cards for use in dye sublimation printers. Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing.
5. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering
6. Surface Holograms cannot be placed over internal electronics.
7. “Representation, Warranty and Indemnity. Customer represents and warrants to HID that it owns, controls, or otherwise has the full and unrestricted right to use the custom artwork
provided to HID for use in connection with this Custom Artwork Checklist Form (the “Custom Artwork”) and to authorize and license HID to use and apply the Custom Artwork to the
cards in the manner provided in this Custom Artwork Checklist Form. Customer agrees to indemnify HID and hold it harmless from and against any claims, liabilities, losses and/or
expenses (including reasonable attorney fees and costs of suit) arising out of the use by HID of the Custom Artwork in the manner provided by this Custom Artwork Checklist Form or
by any custom artwork proofs approved by the Customer.”
8. HID does not recommend placing custom graphics on either side of the Contact Smart Chip area.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 26 of 70
13.56 MHz How to Order Guide – D00529, E.0
Electronic Artwork Checklist
File Submission & Preparation
This document gives digital artwork specifications from our press department. Use these guidelines and your project should go smoothly through the pre-press department.
MEDIA:
Submit files via E-Mail or on CD. Compressed files should be self extracting. Submitted media will not be returned o the customer. FTP site available upon request.
PLATFORM: MS WINDOWS ® /Macintosh ®
Projects that are set up in any of the major applications (listed below under "Graphic Applications") generally translate to Macintosh ® smoothly. Save your final file with pictures embedded, outlined fonts and EPS Vector editable file.
FONTS:
Use Type 1 fonts and include screen and printer fonts on disk. Type may be converted to paths or outlines, but we cannot make copy changes to text submitted in this form. In addition, converted type loses the benefits of PostScript font definitions; hence, type quality may suffer. This is more noticeable in small type (-18 point).
PLACED GRAPHICS:
All placed graphics, saved as TIFF or EPS, should be included in their native program. If a Photoshop image is placed in a Quark document, we need the Photoshop image to produce the job. Sizing, cropping, rotation, etc. should all be done to the element in its native program and placed in Quark. Color images should be converted from RGB to CMYK. Special colors should be designated using
PMS or provide color sample to be matched. Resolution of color images, B&W halftones, or duotones should be 300 dpi.
GRAPHIC APPLICATIONS (latest version):
Adobe Photoshop ® - Adobe Illustrator ® - QuarkXpress ®
BITMAPS AND TRACING:
Scanned line art converted to bitmaps should have a resolution of 1200 - 2400 dpi. Lower resolutions will result in jagged curves. Many programs can convert (trace) bitmaps to vector drawings. Smoothing a traced image can be time consuming, but once completed yields a resolution independent graphic that will provide crisp reproduction for all future uses. We can provide this service for you at our regular file intervention rate. Minimum required DPI (dots per inch) is 300.
BLEEDS:
Incorporate 0.125" of overwork for all bleed images. Any portion of the image that extends to the edge of the product is considered a bleed. Minimum required size with bleed is 2.227" x 3.477" for standard card size file.
MARGINS:
Elements that do not bleed should be at least 0.125" from the edge.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 27 of 70
13.56 MHz How to Order Guide – D00529, E.0
Anti-Counterfeiting Descriptions
Printing Types
1) Laminated Lithographic Printing: High resolution (>3600 dpi) offset printing technology yields photographic quality images. Laminated printing places the ink layer under a rigid clear plastic overlay which protects the printed image from abrasion and allows you to re-print over the existing artwork on the card. The cards are compatible with all Photo ID printing methods: dye-sub, reverse transfer and resin transfer.
2) Surface Lithographic Printing: This process is identical to the Laminated Lithographic Printing, but the ink layer is applied to the outer surface of the finished card and may include a clear coat. You may not be able to re-print on the card. The inks and clear coat are not compatible with D2T2 printing (Dye Diffusion Thermal Transfer, AKA dyesublimation) but may be compatible with reverse transfer printing methods. The surface printing is durable enough for normal handling and use, but may wear more quickly in heavy use or swipe (magnetic stripe) applications. It is not recommended for high use applications, or for printing critical data such as emergency information. This process is often used for quick turnaround of simple text and graphics on card backs.
Surface Hologram
Holograms are one of the most recognizable anti-counterfeiting devices on the market. The optically variable image cannot be duplicated with standard printing. Surface holograms are applied via hot stamping to the exterior of the card surface. This style of application is common to all financial transaction cards.
Embedded Hologram
Embedded holograms are positioned under the rigid clear outer layer of the card surface. Unlike surface holograms, embedded holograms are amenable to dye sublimation – allowing the entire card surface to be personalized. This application style furthers the effectiveness of the anti-counterfeiting feature by requiring expensive specialized equipment during manufacture.
Embedded Advantage™ Security Seal
The Advantage™ product is a specialized optically variable device that is manufactured in only one plant worldwide. It has been the OVD of choice for many government identity documents, including many states driver licenses and the INS card. Like the embedded hologram, this device is placed under the rigid clear outer layer and is not subject to surface abrasion and wear.
Advantage™ images shift from orange to green at different viewing angles.
Invisible Ultra-Violet (UV) Fluorescing Images
Common on credit card, currency and travel documents, invisible ink images provide a covert anti-counterfeiting mechanism.
Though blue/violet fluorescing ink is readily available and inexpensive, red, green, yellow and orange fluorescing pigments remain difficult to acquire. This covert anti-counterfeiting device remains popular because of its relatively easy implementation in the field.
Micro-fine Printing
Very small spot color printing that exploits the limitations of inkjet, toner based (laser) and dye sublimation printers. Counterfeit reproductions can be determined with a handheld magnification tool.
Guilloche Printing
Fine line interlocking spot color patterns that are extremely difficult to scan and reproduce. These design elements are often multicolor and are commonly used on currency and travel documents.
Composite Formulations
Composite formulations are designed for durable applications and for use in dye sublimation printers that employ re-transfer technology and/or polyester laminate patches. Composite cards will minimize the warping caused by such processes. These formulations derive their strength from combining biaxial oriented polyester (OPET) with traditional polyvinyl chloride (PVC).
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 28 of 70
13.56 MHz How to Order Guide – D00529, E.0
Custom Card Artwork Placement and Inkjet Location Guides
Standard PVC and Composite PVC/Polyester Cards
Company Name:
Quantity:
PO No.
Card and Artwork File No.
Date
1. External Number:
Standard Location: The standard external # location is shown on the template below. The external # can only be printed on
the back of the card. The external # will be printed in the standard location, unless otherwise specified.
Custom Location: Indicate the desired external # location by writing "12345" on the appropriate template. The external
# can only be printed on the back of the card.
2. An Artwork File Number is placed on each card. The standard location is indicated by the "CCCCC". The standard location
for the custom artwork number is on the back side of the card. Indicate/incorporate the artwork number on the artwork.
If there will be front side printing only, the custom artwork number will be placed on the printed side, opposite the standard
location.
3. Artwork Placement: Indicate the placement of your artwork on the template below. Custom artwork must clear the
slot punch locations and edges by a min. of 0.125".
4. Magnetic Stripe (Optional): If the location of the magnetic stripe is custom (other than standard) and/or if other types of magnetic stripes are to be added to the card (for example Debitek stripe), indicate the locations of the magnetic stripe(s) on the template.
Standard Location Custom Location
Card Artwork Templates
Slot Punch Indicators
Front
Name:
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Signature:
Back
Notes:
1. External # location reads in the direction as shown. External # character height is approximately 0.1".
2. Cards will have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3. A standard custom artwork file number is printed on the back side of the card. Front side printing of this same number is an option.
4. Slot punch location "indicators" will appear on the back side of the card only.
5. Do not order slot punched cards for use in dye sublimation printers.
Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing.
6. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering.
Date: .
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 29 of 70
13.56 MHz How to Order Guide – D00529, E.0
Tag Credentials
Company Name:
Quantity:
iCLASS Tag MIFARE Tag DESFire Tag
PO No.
Tag and Artwork File No.
1. External Number:
Standard Location: The external # can only be printed on the back of the Tag.
Date
2. Artwork Placement: Indicate the placement of your artwork on the template below (Front side only). Custom artwork must clear the inner circle by a min. of 0.125".
Tag Artwork Template
Front
Notes:
1. Minimum order quantity 10,000 pieces per Purchase Order.
2. Maximum two color artwork.
Name: Signature: Date: .
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 30 of 70
13.56 MHz How to Order Guide – D00529, E.0
Clamshell Cards
iCLASS Clamshell Cards
Company Name:
Quantity:
PO No.
Card and Artwork File No.
Date
1. External Number:
Standard Location: The standard external # location is shown on the template below. The external # can only be printed on
the back of the card. The external # will be printed in the standard location, unless otherwise specified.
Custom Location: Indicate the desired external # location by writing "12345" on the appropriate template. The
external # can only be printed on the back of the card.
2. Artwork Placement: Indicate the placement of your artwork on the template below. Custom artwork must clear the
slot punch location and edges by a min. of 0.125"
Card Artwork Templates
Cover (Front)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Base (Back)
Notes:
1. All iCLASS Clamshell cards have a molded HID logo on the back side (as indicated) as well as a beveled edge all the way around the card. Custom artwork
graphics need to clear the molded logo and bevel by a minimum of 0.125"
2. External # location reads in the direction as shown. External # character height is approximately 0.1"
3. There is no custom artwork file number on the iCLASS Clamshell.
Name: Signature: Date: .
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 31 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Readers
The following section of the How To Order Guide contains ordering information for iCLASS readers. iCLASS readers are available in various flavors, supporting many credential compatibilities, applications, and system interfaces. Use the following table to navigate to the applicable section of iCLASS part numbers.
Credential Compatibility Application System Interface iCLASS / Prox / Magstripe iCLASS iCLASS iCLASS iCLASS
FIPS 201 / Prox / iCLASS
FIPS 201 / iCLASS
FIPS 201 / iCLASS
FeliCa / CEPAS / iCLASS
EV1 / MIFARE
Rijkspas (EV1) / MIFARE
Access Control, Standard
Access Control, Standard
Access Control, Standard
Read / Write, Standard
Biometric Access Control
Access Control, US Gov’t
Access Control, US Gov’t
Read / Write, US Gov’t
Access Control, Transit Credentials
Access Control, HF Migration
Access Control, Dutch Gov’t
Wiegand / Clock-and-Data
OSDP
Hi-O
Serial
Wiegand / Clock-and-Data or Serial
Wiegand / Clock-and-Data
OSDP
Serial
Wiegand / Clock-and-Data
Wiegand / Clock-and-Data / OSDP
Wiegand / Clock-and-Data or Serial
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 32 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.*
Color Options Hardware Options
Configuration
Setting Options 1
iCLASS
Security 2
MIFARE CSN 3
Wiegand Output
Mode
Keypad Configuration
Setting Options 4
Optional
Custom 5
iCLASS R10 Contactless Smart Card Reader:
Mullion Mount -
Read-Only, RoHS Compliant
(Wiegand)
(C&D)
6100
6108
C
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
For Keypad readers only -XXXX Y
iCLASS R15 Contactless Smart Card Reader:
Mullion Mount -
Read-Only, RoHS Compliant
iCLASS R30 Contactless Smart Card Reader:
European & Asian Back Box Mount
Read-Only, RoHS Compliant
iCLASS R40 Contactless Smart Card Reader:
US, European & Asian Back Box Mount -
Read-Only, RoHS Compliant
iCLASS RK40 Contactless Smart Card Reader:
With Keypad -
US, European & Asian Back Box Mount
Read-Only, RoHS Compliant
iCLASS R90 Contactless Smart Card Reader:
Long Read Range -
Read-Only, RoHS Compliant
(Wiegand)
(C&D)
(Wiegand)
(C&D)
6110
6118
(Wiegand)
(C&D)
(Wiegand)
(C&D)
(Wiegand)
6140
6148
6120
6128
6130
6138
6150
C
C
C
C
A
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
K = Black
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
T = Terminal Strip
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 = CSN option not available
For Keypad readers only
For Keypad readers only
For Keypad readers only
00 09 10
11 14 19
20 22 23
For Keypad readers only
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
iCLASS RKL55 Contactless Smart Card Reader:
Read, with LCD and Keypad
US, European and Asian Back Box Mount
Wiegand or Clock and Data output
RoHS Compliant
(Wiegand)
(C&D)
6170
6178
B K = Black T = Terminal Strip
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
00 09 10
11 14 19
20 22 23
-XXXX Y
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details. (SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO
NOT READ MIFARE CSN.)
4
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed
Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5 Contact Factory for pricing, availability, and minimum order quantity.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 33 of 70
13.56 MHz How to Order Guide – D00529, E.0
multiCLASS with HID or Indala Prox Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No
Current
Rev No*
Color Options Hardware Options
Configuration
Setting
Options 1
iCLASS
Security 2
MIFARE CSN 3
Wiegand Output
Mode
Keypad
Configuration
Setting Options 4
Optional
Custom 5
iCLASS RP15 Combination Tech Reader: HID, AWID or
Indala Prox, iCLASS & FIPS201-
Mullion Mount
Read Only, RoHS Compliant
(Wiegand)
(C&D)
6145
6143
C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
C
D
0
1
0 1 2
3 4 5 6 Z
For Keypad readers only -XXXX Y
iCLASS RP40 Combination Technology Reader:
HID, AWID, or Indala Prox, iCLASS & FIP201
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand))
(C&D)
6125
6123
C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
C
D
0
1
0 1 2
3 4 5 6 Z
For Keypad readers only -XXXX Y
iCLASS RPK40 Combination Tech Reader:
HID, AWID, or Indala Prox, iCLASS & FIP201
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
(C&D)
6136
6133
C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
0
1
C
D
0 1 2
3 4 5 6 Z
00 09 10
11 14 19
20 22 23
-XXXX Y
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details. (SETTING NOT APPLICABLE WITH ELITE ORDERS.
ELITE READERS DO NOT READ MIFARE CSN.)
4
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed
Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5 Contact Factory for pricing, availability, and minimum order quantity.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 34 of 70
13.56 MHz How to Order Guide – D00529, E.0
multiCLASS Magstripe Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No
Current
Rev No*
Color Options Hardware Options
Configuration
Setting
Options 1
iCLASS
Security 2
Magnetic Stripe
Data Output 3
Keypad
Configuration
Setting Options 4
iCLASS RM40 Combination Tech Reader, Wiegand
Magnetic stripe, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
iCLASS RM40 Combination Tech Reader, Clock-and-Data
Magnetic stripe, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
iCLASS RMP40 Combination Tech Reader, Wiegand
Magnetic stripe, HID and AWID Prox, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
iCLASS RMP40 Combination Tech Reader, Clock-and-Data
Magnetic stripe, HID and AWID Prox, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
iCLASS RMK40 Combination Tech Reader, Wiegand
Magnetic stripe, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
iCLASS RMK40 Combination Tech Reader, Clock-and-Data
Magnetic stripe, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
iCLASS RMPK40 Combination Tech Reader, Wiegand
Magnetic stripe, HID and AWID Prox, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
6220
6228
6225
6223
6230
6238
6236
C
C
C
C
C
C
C
K = Black
K = Black
K = Black
K = Black
K = Black
K = Black
K = Black
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0 5 6 7 8 9 A
B C D E F
1 4
0 5 6 7 8 9 A
B C D E F
1 4
0 5 6 7 8 9 A
B C D E F
1 4
0 5 6 7 8 9 A
B C D E F
N/A
N/A
N/A
N/A
00 09 10
11 14 19
20 22 23
00 09 10
11 14 19
20 22 23
00 09 10
11 14 19
20 22 23
iCLASS RMPK40 Combination Tech Reader, Clock-and-Data
Magnetic stripe, HID and AWID Prox, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
6233 C K = Black N = Pigtail
T = Terminal Strip
00 01 02
03 04 05
06 07
0
1
C
D
1 4
00 09 10
11 14 19
20 22 23
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 02 = Beep on, LED normally off, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green
1 = Custom,(Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
D = Custom with Open Collector Tamper enabled
06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
2 iCLASS Security Options (Factory or Field Configurable)
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
C = Standard with Open Collector Tamper enabled
3 Magnetic Stripe Data Output
0 = Northern card to 32 bit Wiegand, (FC=16 bits. ID=16 bits) 1 = ABA card, all bits raw data – C&D 4 = ABA card all ABA digits, plus 10 leading & 10 trailing 0’s – C&D 5 = ABA card all ABA digits, plus 10 leading & 10 trailing 0’s – Wiegand
6 = ABA card convert last 4 ABA digits in first field to binary and output as 26 bit Wiegand 7 = ABA card convert last 7 ABA digits in first field to binary and output as 26 bit Wiegand 8 = EMPI card to 26 bit Wiegand
9 = EMPI card to 34 bit Wiegand A = ABA card, convert last 9 ABA digits in first field to binary and output as 34 bit Wiegand B = Basic MS raw output - all bits Wiegand in order received C = ABA to 26 bit Wiegand (FC=8 bits, ID=16 bits)
D = ABA to 34 bit Wiegand(FC=16 bits ID=16 bits) E = ABA to 34 bit Wiegand (Mercury compatible) (FC=12 bits, ID=20 bits) F = ABA to 26 bit Wiegand
4 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
22 = Local PIN Verify. 23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
Optional
Custom
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 35 of 70
13.56 MHz How to Order Guide – D00529, E.0
multiCLASS with EM4102 Prox Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No
Current
Rev No*
Color Options Hardware Options
Configuration
Setting
Options 1
iCLASS
Security 2
MIFARE CSN 3 &
EM4102 4
Wiegand Output
Mode
Keypad
Configuration
Setting Options 5
Optional
Custom 6
iCLASS RP15 Combination Tech Reader: EM4102 Prox, iCLASS & FIPS201-
Mullion Mount
Read Only, RoHS Compliant
(Wiegand)
(C&D)
6145
6143
C
G = Charcoal Gray
K = Black
Pigtail Only
E = EM4102 Module
00 01 02
03 04 05
06 07
C
D
0
1
0 2 3 4
K M N P Q S
T U V
For Keypad readers only
For Keypad readers only
-XXXX Y
iCLASS RP40 Combination Technology Reader:
EM4102 Prox, iCLASS & FIP201
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand))
(C&D)
6125
6123
C
G = Charcoal Gray
K = Black
Pigtail Only
E = EM4102 Module
00 01 02
03 04 05
06 07
C
D
0
1
0 2 3 4
For Keypad readers only
-XXXX Y
K M N P Q S
T U V
For Keypad readers only
iCLASS RPK40 Combination Tech Reader:
EM4102 Prox, iCLASS & FIP201
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
(C&D)
6136
6133
C
G = Charcoal Gray
K = Black
Pigtail Only
E = EM4102 Module
00 01 02
03 04 05
06 07
C
D
0
1
0 2 3 4
00 09 10
11 14 19
20 22 23
-XXXX Y
K M N P Q S
T U V
1
* Revision numbers and availability are subject to change without notice. Consult the factory for availability.
Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read
04 = Beep on, LED normally red, host must flash green 01 = Beep off, LED normally red, reader flashes green on tag read
02 = Beep on, LED normally off, reader flashes green on tag read
2
05 = Beep off, LED normally red, host must flash green iCLASS Security Options (Factory or Field Configurable): See Application Note 28 for additional information on Key Management.
06 = Beep on, LED normally off, host must flash red and/or green
07 = Beep off, LED normally off, host must flash red and/or green
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3 MIFARE Card Serial Number (CSN) and EM4102 Wiegand Output Modes are as follows (Factory or Field Configurable), Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for details. (SETTING NOT
APPLICABLE WITH ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
0 = 32 bit Wiegand 2 = 26 bit Wiegand 3 = 34 bit Wiegand 4 = 40 bit Wiegand 5 = 34 bit Wiegand (EM Parity Modified) (Note: This is = ask option 8, MIFARE CSN enabled)
4 EM4102 Output (MIFARE CSN Suppressed)
K = 26 Bit Wiegand M=34 Bit Wiegand N=40 Bit Wiegand P=42Bit Wiegand Q=C&D (10 Digit Magstripe) S=32 Bit Wiegand
T = 42 bit Wiegand (Parity Modified, MIFARE CSN Suppressed) U = 34 bit Wiegand (Parity Modified, MIFARE CSN Suppressed) V = 34 bit Wiegand (Parity Modified, 34-bit MIFARE CSN)
5 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
20 = Single Key buffering 22 = Local PIN Verify. 23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
6 Contact the factory for pricing, availability, and minimum order quantity
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 36 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS OSDP Reader Part Numbers and Options
Card Reader Description
Base
Part No
Current
Rev No*
Color Options
Hardware
Options 5
Configuration
Settings
Options iCLASS
Security
MIFARE CSN 3
Keypad
Configuration 4 iCLASS R15 Contactless Smart Card Reader
OSDP Enabled
Mullion Mount
Read-Only, RoHS Compliant iCLASS R30 Contactless Smart Card Reader
OSDP Enabled
European and Asian Back Box Mount
Read-Only, RoHS Compliant
6142
6112
C
C
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
P = Terminal Strip with OSDP
(RS485) Module
P = Terminal Strip with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
P
Q
0
1
0
1
P
Q
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
For keypad readers only
For keypad readers only iCLASS R40 Contactless Smart Card Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
6122 C
G = Charcoal Gray
K = Black
P = Terminal Strip with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
0
1
P
Q
0 1 2
3 4 5 6 Z
For keypad readers only iCLASS RK40 Contactless Smart Card Keypad
Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant iCLASS RKL55 Contactless Smart Card
LCD/Keypad Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
20 = Single Key buffering
6132
6172
C
B
G = Charcoal Gray
K = Black
K = Black
P = Terminal Strip with OSDP
(RS485) Module
P = Terminal Strip with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
0
1
P
Q
0
1
P
Q
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
5 The OSDP communication modules allow host driven communication using (HID Advanced Device Protocol) / OSDP (Open Supervised Device Protocol) over an RS485 (Half-Duplex) hardware interface.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
00 09 10
11 14 19
20 22 23
00 09 10
11 14 19
20 22 23
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
P = Standard with OSDP Tamper enabled
Q = Elite with OSDP Tamper enabled
3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details.
(SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed
4 Keypad data is output via Wiegand cable. Reader processes keystrokes. OSDP interface supports standard OSDP keypad output. Configuration Setting options for Wiegand interface includes:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Optional
Custom
-XXXXY
-XXXXY
-XXXXY
-XXXXY
-XXXXY
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 37 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Hi-O Enabled Reader Part Numbers and Options
Card Reader Description
Base
Part No
Current
Rev No*
Color Options
Hardware
Options 7
Configuration
Settings
Options iCLASS
Security
MIFARE CSN iCLASS R10 Contactless Smart Card Reader
Hi-O Communications
Mullion Mount
Read-Only, RoHS Compliant iCLASS R15 Contactless Smart Card Reader
Hi-O Communications
Mullion Mount
Read-Only, RoHS Compliant iCLASS R30 Contactless Smart Card Reader
Hi-O Communications
European and Asian Back Box Mount
Read-Only, RoHS Compliant
6102
6142
6112
C
C
C
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
H = Terminal Strip with Hi-O
Communications
H = Terminal Strip with Hi-O
Communications
H = Terminal Strip with Hi-O
Communications
00
00
00
0
1
0
1
0
1
0
0
0 iCLASS R40 Contactless Smart Card Reader
Hi-O Communications
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
6122 C
G = Charcoal Gray
K = Black
H = Terminal Strip with Hi-O
Communications
00
0
1
0 iCLASS RK40 Contactless Smart Card Keypad
Reader
Hi-O Communications
US, European and Asian Back Box Mount
6132 C
G = Charcoal Gray
K = Black
H = Terminal Strip with Hi-O
Communications
00
0
1
0
Read-Only, RoHS Compliant
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
3 MIFARE Card Serial Number (CSN) Hi-O bus output modes are as follows:
(SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
0 = 32 bit LSB (if DESFire or other CSN Length, output is length of CSN output LSB)
Credential data is always represented within a Card Format Hi-O data package.
5 Keypad data is output via Hi-O bus. Reader processes keystrokes. Configuration Setting options:
00 = ASCII (Hi-O Bus Default)
6 Contact Factory for pricing, availability, and minimum order quantity.
7 The Hi-O communications allows for encrypted CANbus communication with other Hi-O enabled devices.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
Keypad
Configuration
For keypad readers only
For keypad readers only
For keypad readers only
For keypad readers only
00
Optional
Custom
-XXXXY
-XXXXY
-XXXXY
-XXXXY
-XXXXY
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 38 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Read/Write Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.* Color Options
Hardware Options 6
Configuration
Setting Options 1
iCLASS
Security 2
MIFARE CSN 3
Wiegand Output
Mode
Keypad Configuration
Setting Options 4
Optional
Custom 5
iCLASS RW100 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RW150 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RW300 Contactless Smart Card Reader/Writer:
Read/Write
European and Asian Back Box Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RW400 Contactless Smart Card Reader/Writer:
Read/Write
US, European and Asian Back Box Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RWK400 Contactless Smart Card Reader/Writer:
Read/Write, with Keypad
US, European and Asian Back Box Mount
Wiegand Output, and/or RS-232/422 or USB or UART
(RoHS Compliant)
(RoHS Compliant)
(RoHS Compliant)
(RoHS Compliant)
(RoHS Compliant)
iCLASS RWKL550 Contactless Smart Card Reader/Writer:
Read/Write, with LCD and Keypad
US, European and Asian Back Box Mount
Wiegand Output, and/or RS-232, RS- 485, USB or UART (RoHS Compliant)
6101
6141
6111
6121
6131
6171
C
C
C
C
C
B
G = Gray
K = Black
G = Gray
K = Black
G = Gray
K = Black
G = Gray
K = Black
G = Gray
K = Black
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
0 1 2
3 4 5 6 Z
For Keypad readers only
For Keypad readers only
For Keypad readers only
For Keypad readers only
00 09 10
11 14 19
20 22 23
00 09 10
11 14 19
20 22 23
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details. (SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO
4
NOT READ MIFARE CSN.)
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Suppressed
Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5 Contact Factory for pricing, availability, and minimum order quantity.
6 All the following communication modules allow host driven communication using the iCLASS Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. For multi-drop functionality, see iCLASS OSDP
Readers. All Reader/Writers are terminal strip readers. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 39 of 70
13.56 MHz How to Order Guide – D00529, E.0
bioCLASS Reader/Enroller, Read-Only and Read/Write Biometric Reader Part Numbers and Options
Card Reader Description
Base
Part
No.
Current
Rev.
No.*
Color Options Hardware Options 8
Configuration
Setting Options 1
iCLASS
Security 2
MIFARE
CSN 3
Wiegand
Output Mode
Keypad
Configuration
Setting Options 4
Optional
Custom
iCLASS RKLB57 Contactless Smart Card Biometric Reader/Enroller:
Reader with LCD, Keypad, and fingerprint biometric module
US, European and Asian Back Box Mount (Wiegand Output)
6180 B K = Black
Read Only, RoHS Compliant
R = Reader/Enroller 6
00 01 02
03 04 05
06 07
0
1C
D
0 = N/A
00 09 10
11 14 19
20 22
-XXXX Y
iCLASS RKLB57 Contactless Smart Card Reader:
with LCD, Keypad, and fingerprint biometric module
US, European and Asian Back Box Mount (Wiegand Output)
Requires reader/enroller or CP575A for enrolling fingerprint templates.
6180
6188
B K = Black T = Terminal Strip
Read Only, RoHS Compliant (C&D Output)
iCLASS RWKLB575 Contactless Smart Card Reader/Writer:
Read/Write, with LCD, Keypad, and fingerprint biometric module
US, European and Asian Back Box Mount
Wiegand Output, and/or RS-232, RS-485, USB or UART
Requires reader/enroller or CP575A for enrolling fingerprint templates.
6181 B K = Black
(All Terminal Strip)
T = RS232
4 = RS485 (Full-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
0 = N/A
0 = N/A
00 09 10
11 14 19
20 22
00 09 10
11 14 19
20 22 23
-XXXX Y
-XXXX Y iCLASS BIO500 5 fingerprint biometric module upgrade (Sensor Only) 6190 B K = Black N = None 00 0 = N/A 0 = N/A 00 N/A
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security options (Factory or Field Configurable)
0 = Standard; protects access and biometric applications (Reads/Enrolls all iCLASS cards with unique keys diversified from HID master key)
1 = Elite; protects access and biometric applications (Reads/Enrolls only iCLASS cards with site-specific Elite key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Elite with Open Collector Tamper enabled
3 MIFARE Card Serial Number (CSN) Wiegand Output Modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details.
(SETTING NOT APPLICABLE WITH ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit
4 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
20 = Single Key buffering 22 = Local PIN Verify. 23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5 BIO500 fingerprint biometric module upgrade is compatible with the RWKL550 iCLASS LCD Keypad Reader only.
6 In addition to RKLB57 reader only (6180BKT), this part provides additional enrollment capabilities and multi-lingual support. Reader/Enroller is field configurable for one of the following behaviors: reader/enroller, readeronly or enroller-only, and field configurable for one of 10 languages (see datasheet for more information). This product replaces CP575 fingerprint template enroller (no longer available).
8 All the following communication modules allow host driven communication using the iCLASS Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 40 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS US Government FIPS201 Compliant Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.*
Color Options Hardware Options
Configuration
Setting Options 1
iCLASS
Security 2
FIPS 201 3
Wiegand Output
Mode
Keypad Configuration
Setting Options 4
iCLASS R10 Contactless Smart Card Reader:
Mullion Mount -
Read-Only, RoHS Compliant
iCLASS R15 Contactless Smart Card Reader:
Mullion Mount -
Read-Only, RoHS Compliant
(Wiegand)
(C&D)
(Wiegand)
(C&D)
6100
6108
6140
6148
C
C
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
For Keypad readers only
For Keypad readers only
iCLASS R30 Contactless Smart Card Reader:
European & Asian Back Box Mount
Read-Only, RoHS Compliant
iCLASS R40 Contactless Smart Card Reader:
US, European & Asian Back Box Mount -
Read-Only, RoHS Compliant
(Wiegand)
(C&D)
6110
6118
(Wiegand)
(C&D)
6120
6128
C
C
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
For Keypad readers only
For Keypad readers only
iCLASS RK40 Contactless Smart Card Reader:
With Keypad -
US, European & Asian Back Box Mount
Read-Only, RoHS Compliant
(Wiegand)
(C&D)
6130
6138
C
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
T = Terminal Strip
00 01 02
03 04 05
06 07
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
00 09 10
11 14 19
20 22 23
iCLASS RKL55 Contactless Smart Card Reader:
Read, with LCD and Keypad
US, European and Asian Back Box Mount
Wiegand or Clock and Data output
RoHS Compliant
(Wiegand)
(C&D)
6170
6178
B K = Black T = Terminal Strip
00 01 02
03 04 05
06 07
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
00 09 10
11 14 19
20 22 23
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3 FIPS 201 (USA Government Smart Card) Formats:
7 = 200 bit, 8 = 64 bit, BCD, 9 = 64 bit, REVERSE BCD, A = 40 bit, BCD, C = 40 bit, REVERSE BCD, D = 75 bit GSA, F = HMAC + 200 bit, G = HMAC + 40 bit BCD, H = HMAC + 64 bit BCD, I = 80 bit combined, J = 32 bit HMAC,
K = 200 bit & 14443A 56 bit CSN, M = 200 bit & 14443A 26 bit CSN, N = 75 bit GSA & 14443A 56 bit CSN, T = 14443A 32bit CSN.
For more information on the FIPS201 outputs, refer to the output selection guide: http://www.hidcorp.com/pdfs/products/fips201_technote.pdf
4 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
0
1
C
D
0
1
C
D
US Government
(FIPS 201)
Required Part
Suffix
-G3.0
-G3.0
-G3.0
-G3.0
-G3.0
-G3.0
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 41 of 70
13.56 MHz How to Order Guide – D00529, E.0
multiCLASS US Government FIPS201 Compliant with HID or Indala Prox Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.*
Color Options Hardware Options
Configuration
Setting Options 1
iCLASS
Security 2
FIPS201 3
Wiegand Output
Mode
Keypad Configuration
Setting Options 4
US Government
(FIPS 201)
Required Part
Suffix
iCLASS RP15 Combination Tech Reader: HID, AWID or Indala
Prox, iCLASS & FIPS201-
Mullion Mount (Wiegand)
Read Only, RoHS Compliant (C&D)
6145
6143
C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
For Keypad readers only -G3.0
iCLASS RP40 Combination Technology Reader:
HID, AWID, or Indala Prox, iCLASS & FIP201
US, European & Asian Back Box Mount - (Wiegand)
Read Only, RoHS Compliant (C&D)
6125
6123
C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
For Keypad readers only
iCLASS RPK40 Combination Tech Reader:
HID, AWID, or Indala Prox, iCLASS & FIP201
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
20 = Single Key buffering
(Wiegand)
(C&D)
6136
6133
C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
00 09 10
11 14 19
20 22 23
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Custom, not valid with FIPS201 options (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
3 FIPS 201 (USA Government Smart Card) Formats:
7 = 200 bit, 8 = 64 bit, BCD, 9 = 64 bit, REVERSE BCD, A = 40 bit, BCD, C = 40 bit, REVERSE BCD, D = 75 bit GSA, F = HMAC + 200 bit, G = HMAC + 40 bit BCD, H = HMAC + 64 bit BCD, I = 80 bit combined, J = 32 bit HMAC,
K = 200 bit & 14443A 56 bit CSN, M = 200 bit & 14443A 26 bit CSN, N = 75 bit GSA & 14443A 56 bit CSN, T = 14443A 32bit CSN.
For more information on the FIPS201 outputs, refer to the output selection guide: http://www.hidcorp.com/pdfs/products/fips201_technote.pdf
4 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
-G3.0
-G3.0
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 42 of 70
13.56 MHz How to Order Guide – D00529, E.0
multiCLASS US Government FIPS 201 Compliant with Magstripe Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No
Current
Rev No*
Color
Options
Hardware
Options
Configuration
Setting Options 1
iCLASS
Security 2
FIPS201 3 Wiegand
Output Mode
Keypad Configuration
Setting Options 4
US Government
(FIPS 201)
Required Part Suffix
Magnetic
Stripe Data
Output 5
multiCLASS RM40 Combination Tech Reader,
Wiegand, Magnetic stripe, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
multiCLASS RMP40 Combination Tech Reader,
Wiegand, Magnetic stripe, HID and AWID Prox, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
multiCLASS RMK40 Combination Tech Keypad Reader,
Wiegand, Magnetic stripe, iCLASS
US/EU APAC Back Box Mount, Wall switch form factor
Read Only, RoHS Compliant
multiCLASS RMPK40 Combination Tech Keypad
Reader, Wiegand, Magnetic stripe, HID and AWID Prox, iCLASS, US/EU APAC Back Box Mount, Wall switch form factor, Read Only, RoHS Compliant
6220
6225
6230
6236
C
C
C
C
K = Black
K = Black
K = Black
K = Black
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
N = Pigtail
T = Terminal Strip
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
N/A
N/A
00 09 10
11 14 19
20 22
00 09 10
11 14 19
20 22
-G3.0
-G3.0
-G3.0
-G3.0
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 02 = Beep on, LED normally off, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
-
-
-
-
0 5 6 7 8 9
A B C D E
F
0 5 6 7 8 9
A B C D E
F
0 5 6 7 8 9
A B C D E
F
0 5 6 7 8 9
A B C D E
F
2 iCLASS Security Options (Factory or Field Configurable)
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
C = Standard with Open Collector Tamper enabled
1 = Custom,(Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
D = Custom with Open Collector Tamper enabled
3 FIPS 201 (USA Government Smart Card) Formats:
7 = 200 bit, 8 = 64 bit, BCD, 9 = 64 bit, REVERSE BCD, A = 40 bit, BCD, C = 40 bit, REVERSE BCD, D = 75 bit GSA, F = HMAC + 200 bit, G = HMAC + 40 bit BCD, H = HMAC + 64 bit BCD, I = 80 bit combined, J = 32 bit HMAC,
K = 200 bit & 14443A 56 bit CSN, M = 200 bit & 14443A 26 bit CSN, N = 75 bit GSA & 14443A 56 bit CSN, T = 14443A 32bit CSN.
4
For more information on the FIPS201 outputs, refer to the output selection guide: http://www.hidcorp.com/pdfs/products/fips201_technote.pdf
Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration setting options:
00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
11 = Buffer one key and add parity
20 = Single Key buffering
22 = Local PIN Verify. Requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5 Magnetic Stripe Data Output
0 = Northern card to 32 bit Wiegand, (FC=16 bits. ID=16 bits) 1 = ABA card, all bits raw data – C&D 4 = ABA card all ABA digits, plus 10 leading & 10 trailing 0’s – C&D 5 = ABA card all ABA digits, plus 10 leading & 10 trailing 0’s – Wiegand
6 = ABA card convert last 4 ABA digits in first field to binary and output as 26 bit Wiegand 7 = ABA card convert last 7 ABA digits in first field to binary and output as 26 bit Wiegand 8 = EMPI card to 26 bit Wiegand
9 = EMPI card to 34 bit Wiegand A = ABA card, convert last 9 ABA digits in first field to binary and output as 34 bit Wiegand B = Basic MS raw output - all bits Wiegand in order received C = ABA to 26 bit Wiegand (FC=8 bits, ID=16 bits)
D = ABA to 34 bit Wiegand(FC=16 bits ID=16 bits) E = ABA to 34 bit Wiegand (Mercury compatible) (FC=12 bits, ID=20 bits) F = ABA to 26 bit Wiegand
All magnetic stripe format outputs match option B (Basic MS raw output – all bits Wiegand in order received), documented on page 6 of http://www.hidglobal.com/documents/multiclass_magstripe_reader_an_en.pdf
. To modify magstripe output, contact technical support department to order desired configuration card from Table 2, column “Configuration Card”, on page 6.
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 43 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS US Government FIPS 201 Read/Write Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.* Color Options
Hardware Options 5
Configuration
Setting Options 1
iCLASS
Security 2
FIPS201 3 Wiegand
Output Mode
Keypad Configuration
Setting Options 4
US
Government
(FIPS 201)
Required
Part Suffix
iCLASS RW100 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RW150 Contactless Smart Card Reader/Writer:
Read/Write
Mullion Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RW300 Contactless Smart Card Reader/Writer:
Read/Write
European and Asian Back Box Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RW400 Contactless Smart Card Reader/Writer:
Read/Write
US, European and Asian Back Box Mount
Wiegand and RS232 or RS485 or USB or UART
iCLASS RWK400 Contactless Smart Card Reader/Writer:
Read/Write, with Keypad
US, European and Asian Back Box Mount
Wiegand Output, and/or RS-232/422 or USB or UART
(RoHS Compliant)
(RoHS Compliant)
(RoHS Compliant)
(RoHS Compliant)
(RoHS Compliant)
6101
6141
6111
6121
6131
C
C
C
C
B
G = Gray
K = Black
G = Gray
K = Black
G = Gray
K = Black
G = Gray
K = Black
G = Gray
K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
For Keypad readers only
For Keypad readers only
For Keypad readers only
For Keypad readers only
00 09 10
11 14 19
20 22 23
-G3.0
-G3.0
--G3.0
-G3.0
-G3.0
iCLASS RWKL550 Contactless Smart Card Reader/Writer:
Read/Write, with LCD and Keypad
US, European and Asian Back Box Mount
Wiegand Output, and/or RS-232, RS- 485, USB or UART (RoHS Compliant)
6171 B K = Black
T = RS232
4 = RS485(Full-Duplex)
M = RS485(Half-Duplex)
U = USB
B = UART to UART
00 01 02
03 04 05
06 07
0
1
C
D
7 8 9 A C
D F G H I J
K M N T
00 09 10
11 14 19
20 22 23
-G3.0
3
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
C = Standard with Open Collector Tamper enabled
D = Custom with Open Collector Tamper enabled
FIPS 201 (USA Government Smart Card) Formats:
7 = 200 bit, 8 = 64 bit, BCD, 9 = 64 bit, REVERSE BCD, A = 40 bit, BCD, C = 40 bit, REVERSE BCD, D = 75 bit GSA, F = HMAC + 200 bit, G = HMAC + 40 bit BCD, H = HMAC + 64 bit BCD, I = 80 bit combined, J = 32 bit HMAC,
K = 200 bit & 14443A 56 bit CSN, M = 200 bit & 14443A 26 bit CSN, N = 75 bit GSA & 14443A 56 bit CSN, T = 14443A 32bit CSN.
4 Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
5 All the following communication modules allow host driven communication using the iCLASS Serial Protocol. All the following communication modules (except USB) allow for card ID reporting instantiated by the reader. For multi-drop functionality, see iCLASS OSDP
Readers. All Reader/Writers are terminal strip readers. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 44 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS US Government FIPS 201 Compliant OSDP Reader Part Numbers and Options
Card Reader Description
Base
Part No
Current
Rev No*
Color Options
Hardware
Options 5
Configuration
Settings
Options iCLASS
Security
FIPS201 3
Wiegand Output
Mode iCLASS R15 Contactless Smart Card Reader
OSDP Enabled
Mullion Mount
Read-Only, RoHS Compliant
6142 C
G = Charcoal Gray
K = Black
P = Terminal Strip with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
P
Q
0
1
7 8 9 A C
D F G H I J
K M N T iCLASS R30 Contactless Smart Card Reader
OSDP Enabled
European and Asian Back Box Mount
Read-Only, RoHS Compliant
6112 C
G = Charcoal Gray
K = Black
P = Terminal Strip with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
P
Q
0
1
7 8 9 A C
D F G H I J
K M N T
Keypad
Configuration 4
For keypad readers only
For keypad readers only
US Government
(FIPS 201)
Required Part
Suffix
-G3.0
-G3.0
iCLASS R40 Contactless Smart Card Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
6122 C
G = Charcoal Gray
K = Black
P = Terminal Strip with OSDP
(RS485) Module
00 01 02
03 04 05
06 07
P
Q
0
1
7 8 9 A C
D F G H I J
K M N T
For keypad readers only
-G3.0
4 iCLASS RK40 Contactless Smart Card Keypad
Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant iCLASS RKL55 Contactless Smart Card
LCD/Keypad Reader
OSDP Enabled
US, European and Asian Back Box Mount
Read-Only, RoHS Compliant
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
6132
6172
B
B
G = Charcoal Gray
K = Black
K = Black
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
P = Terminal Strip with OSDP
(RS485) Module
P = Terminal Strip with OSDP
(RS485) Module iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
1 = Elite Key (Reads only iCLASS cards with unique keys diversified from matching site specific master key; consult factory for availability)
P = Standard with OSDP Tamper enabled
K = 200 bit & 14443A 56 bit CSN, M = 200 bit & 14443A 26 bit CSN, N = 75 bit GSA & 14443A 56 bit CSN, T = 14443A 32bit CSN.
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
0
1
P
Q
0
1
P
Q
7 8 9 A C
D F G H I J
K M N T
7 8 9 A C
D F G H I J
K M N T
Keypad data is output via Wiegand cable. Reader processes keystrokes. OSDP interface supports standard OSDP keypad output. Configuration Setting options for Wiegand interface includes:
00
11
00
11
*Revision numbers and availability are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2
09
14
20 22
09
14
20 22
10
19
23
10
19
23
Q = Elite with OSDP Tamper enabled
3 FIPS 201 (USA Government Smart Card) Formats:
7 = 200 bit, 8 = 64 bit, BCD, 9 = 64 bit, REVERSE BCD, A = 40 bit, BCD, C = 40 bit, REVERSE BCD, D = 75 bit GSA, F = HMAC + 200 bit, G = HMAC + 40 bit BCD, H = HMAC + 64 bit BCD, I = 80 bit combined, J = 32 bit HMAC,
-G3.0
-G3.0
5 The OSDP communication modules allow host driven communication using (HID Advanced Device Protocol) / OSDP (Open Supervised Device Protocol) over an RS485 (Half-Duplex) hardware interface. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 45 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS / multiCLASS Transit Read-Only Reader Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.*
Color Options Hardware Options
Configuration
Setting Options 1
iCLASS R10-T Contactless Smart Card Reader iCLASS, FeliCa and CEPAS
Mullion Mount
Read-Only, RoHS Compliant
iCLASS R15-T Contactless Smart Card Reader iCLASS, FeliCa and CEPAS
Mullion Mount
Read-Only, RoHS Compliant
(Wiegand)
(Wiegand)
6109
6149
C
C
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
N = Pigtail 18” (0.5 meter)
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
iCLASS
Security 2
0
0
MIFARE CSN 3 ,
FeliCa™ IDm or
CEPAS Output
5 6 7 8
9 A B C
D E F
5 6 7 8
9 A B C
D E F
Keypad
Configuration
Setting Options 5
For Keypad readers only
For Keypad readers only
Optional
Custom
-XXXX Y
-XXXX Y
iCLASS R30-T Contactless Smart Card Reader iCLASS, FeliCa and CEPAS
European & Asian Back Box Mount
Read-Only, RoHS Compliant
(Wiegand)
6119 C
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
00 01 02
03 04 05
06 07
0
5 6 7 8
9 A B C
D E F
For Keypad readers only
-XXXX Y
iCLASS R40-T Contactless Smart Card Reader iCLASS, FeliCa and CEPAS
US, European & Asian Back Box Mount
Read-Only, RoHS Compliant
(Wiegand)
iCLASS RK40-T Contactless Smart Card Reader with Keypad - iCLASS and FeliCa (Wiegand)
US, European & Asian Back Box Mount
Read-Only, RoHS Compliant
multiCLASS RP15-T Combination Technology Reader
HID, AWID, or Indala Prox, iCLASS, FeliCa and CEPAS
Mullion Mount
Read Only, RoHS Compliant
(Wiegand)
multiCLASS RP40-T Combination Technology Reader
HID, AWID, or Indala Prox, iCLASS, FeliCa and CEPAS
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
6129
6139
6144
6124
C
C
C
C
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
G = Charcoal Gray
K = Black
N = Pigtail 18” (0.5 meter)
N = Pigtail 18” (0.5 meter)
Pigtail Only
N = HID and AWID Module
D = Indala Module
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
00 01 02
03 04 05
06 07
0
0
0
0
5 6 7 8
9 A B C
D E F
5 6 7 8
9 A B C
D E F
5 6 7 8
9 A B C
D E F
5 6 7 8
9 A B C
D E F
For Keypad readers only
00 09 10
11 14 19
20 22 23
For Keypad readers only
For Keypad readers only
-XXXX Y
-XXXX Y
-XXXX Y
-XXXX Y
multiCLASS RPK40-T Combination Technology Reader
HID, AWID, or Indala Prox, iCLASS and FeliCa
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
6134 C
G = Charcoal Gray
K = Black
Pigtail Only
N = HID and AWID Module
D = Indala Module
00 01 02
03 04 05
06 07
0
5 6 7 8
9 A B C
D E F
00 09 10
11 14 19
20 22 23
-XXXX Y
* Transit readers have the ability to read FeliCa IDm's and CEPAS CAN or CSN.
**Revision numbers are subject to change without notice. Consult factory for availability.
1 Configuration Setting Options are as follows (Factory or Field Configurable):
00 = Beep on, LED normally red, reader flashes green on tag read 03 = Beep off, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
01 = Beep off, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green 07 = Beep off, LED normally off, host must flash red and/or green
02 = Beep on, LED normally off, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
2 iCLASS Security Options (Factory or Field Configurable): See Application Note Number 28 for additional information on Key Management.
0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
3 MIFARE Card Serial Number (CSN,) FeliCa IDm, CEPAS CAN/CSN output modes are as follows (Factory or Field Configurable). Refer to the "iCLASS Reader Wiegand Output Configuration Guide” for more details. (SETTING NOT APPLICABLE WITH
ELITE ORDERS. ELITE READERS DO NOT READ MIFARE CSN.)
5 = 64bits LSB Felica or 64bits MSB CEPAS CAN 6 = 64bits LSB Felica or 64bits MSB CEPAS CSN
9 = 26 bit (Even parity +24 bits LSB + Odd Parity) Felica or CEPAS CAN
D = 64 bit LSB Felica
5
B = 26 bit (Even parity +24 bits LSB + Odd Parity) Felica or CEPAS CAN or MIFARE
E = 26 bit (Even parity + 24 bits LSB + Odd parity) Felica
7 = 64bits LSB Felica or 64 bits MSB CEPAS CAN or MIFARE
A = 26 bit (Even parity +24 bits LSB + Odd Parity) Felica or CEPAS CSN
F = 64 bits LSB FeliCa or 64 bits MIFARE
Keypad data is output via Wiegand cable. Reader processes keystrokes. Configuration Setting options:
00 = Buffer one key, no parity, 4 bit message
11 = Buffer one key and add parity
20 = Single Key buffering
09 = Buffer one key, add compliment, 8 bit message (Dorado)
14 = Buffer one to five keys (Standard 26 bit output)
22 = Local PIN Verify.
8 = 64bits LSB Felica or 64 bits MSB CEPAS CSN or MIFARE
C = 26 bit (Even parity +24 bits + Odd Parity) Felica or CEPAS CSN or MIFARE
10 = Buffer six keys and add parity
19 = Buffer four keys and add parity
23 = Buffer one to 11 keys
Note: Local PIN Verify requires User PIN code to be programmed into the iCLASS Credential at the factory or by using the iCLASS Card Programmer (consult factory for availability.)
RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 46 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS High Frequency Migration Readers
MIFARE DESFire EV1 and MIFARE Classic Compliant Read-Only Part Numbers and Options iCLASS Card Reader Description
13.56 MHz Only
Wiegand Communication
Base Part
No
Current Rev
No*
Color Options Hardware Options Configuration 1
Model: RS10, Read-Only Wiegand Output iCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
Mullion Mount
7100 C K = Black
T = Terminal Strip, No Spacer
S = Terminal Strip & Spacer
-EVP00000
Model: RS40, Read-Only Wiegand Output iCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
Wall Switch Mount. EU/US/Asian Mounting Holes.
Model: RSK40, Read-Only Wiegand Output with Keypad
iCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
Wall Switch Mount. EU/US/Asian Mounting Holes.
7120
7130
C
C
K = Black
K = Black
T= Terminal Strip, No Spacer
S = Terminal Strip & Spacer
T= Terminal Strip, No Spacer
S = Terminal Strip & Spacer
-EVP00000
-EVP00000
*Revision numbers and availability are subject to change without notice. Consult the factory for availability.
1 Default configuration is Beeper On, LED Normally Red, LED Flashes Green on card read, iCLASS HID Application, MIFARE CSN output 32 bit, Keypad 4-bit output, Tamper Disabled. For more configuration options, consult your regional technical support representative. Custom reader configurations support up to two (2) of the following: MIFARE Classic, MIFARE DESFire EV1 (including DESFire 0.6 backward compatible configurations). Additionally readers support ISO14443A CSN and Prox
(multiCLASS model reader required.
Notes:
- All readers RoHS compliant. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
- Contact the factory for pricing, availability, and minimum order quantity.
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 47 of 70
13.56 MHz How to Order Guide – D00529, E.0
multiCLASS High Frequency Migration Readers
MIFARE DESFire EV1 and MIFARE Classic Compliant Read-Only Part Numbers and Options multiCLASS Card Reader Description
13.56 MHz & 125 kHz Support
Wiegand Communication
Base Part
No
Current Rev
No*
Color Options Hardware Options Configuration 1
Model: RSP15, Read-Only Wiegand Output multiCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
125 kHz HID Prox Support
Mullion Mount
Model: RSP40, Read-Only Wiegand Output
multiCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
125 kHz HID Prox Support
Wall Switch Mount. EU/US/Asian Mounting Holes.
7145
7125
C
C
K = Black
K = Black
N = HID Prox w/ Pigtail, No Spacer
U = HID Prox w/ Pigtail & Spacer
N = HID Prox w/ Pigtail, No Spacer
U = HID Prox w/ Pigtail & Spacer
-EVP00000
-EVP00000
Model: RSPK40, Read-Only Wiegand Output with Keypad multiCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
125 kHz HID Prox Support
Wall Switch Mount. EU/US/Asian Mounting Holes.
7136 C K = Black
N = HID Prox w/ Pigtail, No Spacer
U = HID Prox w/ Pigtail & Spacer
-EVP00000
*Revision numbers and availability are subject to change without notice. Consult the factory for availability.
1 Default configuration is Beeper On, LED Normally Red, LED Flashes Green on card read, iCLASS HID Application, MIFARE CSN output 32 bit, Keypad 4-bit output, Tamper Disabled. For more configuration options, consult your regional technical support representative. Custom reader configurations support up to two (2) of the following: MIFARE Classic, MIFARE DESFire EV1 (including DESFire 0.6 backward compatible configurations). Additionally readers support ISO14443A CSN and Prox
(multiCLASS model reader required).
Notes:
- All readers RoHS compliant. RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
- Contact the factory for pricing, availability, and minimum order quantity.
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 48 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS High Frequency Migration Readers - OSDP
MIFARE DESFire EV1 and MIFARE Classic Compliant OSDP Compliant Reader Part Numbers and Options iCLASS Card Reader Description
13.56 MHz Only
OSDP Communication
Base Part
No
Current Rev
No*
Color Options Hardware Options
Model: RS10, OSDP Communication to and from Panel iCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
Mullion Mount
7102 C K = Black
T = Terminal Strip, No Spacer
S = Terminal Strip & Spacer
Configuration 1
-EVP00120
Model: RS40, OSDP Communication to and from Panel iCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
Wall Switch Mount. EU/US/Asian Mounting Holes.
7122 C K = Black
T= Terminal Strip, No Spacer
S = Terminal Strip & Spacer
-EVP00120
Model: RSK40, OSDP Communication to and from Panel
iCLASS High Frequency Migration Reader
MIFARE DESFire EV1 & MIFARE Classic
Custom Data Application Support
Wall Switch Mount. EU/US/Asian Mounting Holes.
7132 C K = Black
T= Terminal Strip, No Spacer
S = Terminal Strip & Spacer
-EVP00120
*Revision numbers and availability are subject to change without notice. Consult the factory for availability.
1 Default configuration is Beeper On, LED Normally Red, LED Flashes Green on card read, iCLASS HID Application, MIFARE CSN output 32 bit, Keypad 4-bit output, Tamper Disabled. For more configuration options, consult your regional technical support representative. Custom reader configurations support up to two (2) of the following: MIFARE Classic, MIFARE DESFire EV1 (including DESFire 0.6 backward compatible configurations). Additionally readers support ISO14443A CSN and Prox
(multiCLASS model reader required).
Notes:
- RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
- Contact the factory for pricing, availability, and minimum order quantity.
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 49 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS / multiCLASS Rijkspas Compliant Read-Only and OSDP Reader Part Numbers and Options
Card Reader Description Base Part No Current Rev No* Color Options Hardware Options Configuration 1
iCLASS – Rijkspas RS10 Contactless Smart Card Reader DESFire EV1
Rijkspas, MIFARE Classic
Mullion Mount
Read Only, RoHS Compliant
iCLASS – Rijkspas RS40 Contactless Smart Card Reader:
DESFire EV1 Rijkspas, MIFARE Classic
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
(OSDP)
(Wiegand)
(OSDP)
7100
7102
7120
7122
C
C
K = Black
K = Black
T = Terminal Strip, No Spacer
S = Terminal Strip & Spacer
T= Terminal Strip, No Spacer
S = Terminal Strip & Spacer
-RJP00000 (Wiegand)
-RJP00112 (OSDP)
-RJP00000 (Wiegand)
-RJP00112 (OSDP)
iCLASS – Rijkspas RSP15 Combination Technology Reader:
DESFire EV1 Rijkspas, MIFARE Classic, HID Prox
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
iCLASS – Rijkspas RSK40 Contactless Smart Card Reader with Keypad:
DESFire EV1 Rijkspas, MIFARE Classic
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
iCLASS – Rijkspas RSPK40 Combination Technology Reader:
(Wiegand)
(OSDP)
DESFire EV1 Rijkspas, MIFARE Classic, HID Prox
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
iCLASS – Rijkspas RSP40 Combination Technology Reader:
DESFire EV1 Rijkspas, MIFARE Classic, HID Prox
US, European & Asian Back Box Mount -
Read Only, RoHS Compliant
(Wiegand)
(Wiegand)
7145
7130
7132
7136
7125
C
C
C
C
K = Black
K = Black
K = Black
K = Black
N = Pigtail, No Spacer
U = Pigtail & Spacer
T= Terminal Strip, No Spacer
S = Terminal Strip & Spacer
N = Pigtail, No Spacer
U = Pigtail & Spacer
N = Pigtail, No Spacer
U = Pigtail & Spacer
-RJP00000
-RJP00000 (Wiegand)
-RJP00112 (OSDP)
*Revision numbers and availability are subject to change without notice. Consult the factory for availability.
1 Default configuration is Beeper On, LED Normally Red, LED Flashes Green on card read, No MIFARE CSN output, Keypad local verify for Rijkspas, Keypad 4-bit output non-Rijkspas, Tamper Disabled.
For more configuration options, consult the iCLASS Rijkspas Configuration Guide ( www.hidglobal.com/documents.iclass_rijkspas_configuration_guide_en.xls
).
Notes:
- RoHS compliant Readers are appropriately marked on reader and box. (RoHS or Restriction of Hazardous Substances Directive restricts certain hazardous substances in electrical and electronic equipment.)
- Contact the factory for pricing, availability, and minimum order quantity.
-RJP00000
-RJP00000
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 50 of 70
13.56 MHz How to Order Guide – D00529, E.0
Reader Wiegand Output Configuration Guide
MIFARE CSN 1, 2 Wiegand Data Output formats
Any HID/OEM format.
Comments
As encoded into the iCLASS card by HID factory or field programmer.
32-bit, MIFARE Card Serial Number. For MIFARE Cards only, random number burned into card chip.
32-bit, MIFARE Card Serial Number, reverse output.
For MIFARE Cards only, reverse output matches HID MIFARE Reader base model number: 6055A and
For MIFARE Cards only, ID = 16 lower bits of CSN. Reader generates fixed FC - defaults to 001, but
26-bit, derived from MIFARE Card Serial number.
34-bit, MIFARE Card Serial number plus beginning/ending parity. can be
For MIFARE Cards only
40-bit, MIFARE Card Serial number plus 8-bit checksum. For MIFARE Cards only, Checksum per Philips standard.
37 bit, derived from MIFARE Ultralight or DESFire ® Card Serial
Number
56 bit, MIFARE Ultralight or DESFire ® Card Serial Number
For Ultralight or DESFire ® Cards only, 37 lower bits of CSN in reverse order (Keypad Readers Only)
For Ultralight or DESFire ® Card Only, 56 bit CSN in reverse order (Keypad Readers Only)
Notes:
1. MIFARE CSN = Card Serial Number, a 32-bit random number burned into the chip by the chip manufacturer (not HID).
2. iCLASS 64 bit CSN is never transmitted via the Wiegand Output. See HID Application Note Number 28 for details.
All trademarks and registered trademarks are the properties of their respective companies. iCLASS Programmer Ordering Guide
All iCLASS and bioCLASS Programmers are now located in the Credential Programmer How To Order Guide.
Model Number
All models
XXXXCXX0000YY
XXXXCXX0001YY
XXXXCXX0002YY
XXXXCXX0003YY
XXXXCXX0004YY
61XXCXX0005YY
61XXCXX0006YY
February 2012 2007 - 2012 HID Global Corporation. All rights reserved Page 51 of 70
13.56 MHz How to Order Guide, – D00529, E.0
SmartID Readers
SmartID Single-Technology 13.56 MHz Readers Part Numbers and Options
Card Reader Description
Base Part
No.
Current
Rev. No.
Color
Options
Application 1
SmartID S10 Contactless Smart Card Reader
Mullion Mount, Terminal Strip
Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant)
8030 D S = Silver
HM = HID MIFARE (default)
HC = HID MIFARE (non-default)
CM = MIFARE
DM = Dual MIFARE
DF = DESFire
SmartID SW100 Contactless Smart Card Reader/Writer
Mullion Mount, Terminal Strip
Host driven RS232, RS485 or RS422
SmartID SK10 Contactless Smart Card Keypad Reader
Mullion Mount, Terminal Strip
Wiegand, Clock-and-Data, RS232, RS485 or RS422
(RoHS Compliant)
(RoHS Compliant)
SmartID SWK100 Contactless Smart Card Keypad Reader/Writer
Mullion Mount, Terminal Strip
Host driven RS232, RS485 or RS422 (RoHS Compliant)
8030
8031
8031
D
D
D
S = Silver
S = Silver
S = Silver
TC = T/CL Protocol
RW = 3964 Protocol (Legacy)
HM = HID MIFARE (default)
HC = HID MIFARE (non-default)
CM = MIFARE
DM = Dual MIFARE
DF = DESFire
TC = T/CL Protocol
RW = 3964 Protocol (Legacy)
1 All part numbers generated by the above grid (except HM = HID MIFARE) require an additional accompanying “format configuration”. The format configuration is a separate part number that is combined on a PO with the above part number to make up the full definition of a reader. Format configurations are either generic (for public use) or custom. For generic format information, see SmartID – Generic Configuration Document ( http://www.hidcorp.com/documents/smartid_configuration_guide_en.pdf
). For custom format definition, see
Custom SmartID Format, MIFARE or DESFire Requirements on subsequent page. For more information on applications and format configurations, reference the whitepaper SmartID
Application and Configurations ( http://www.hidcorp.com/documents/smartid_apps_configs.pdf
). The HM application provides standard reader configurations, including beeper and
LEDs. The HC application allows for configuration of beeper and LEDs.
SmartTRANS Multi-Technology Readers Part Numbers and Options
(13.56 MHz & 125 kHz)
Card Reader Description Base Part No.
Current 1
SmartID SP10 Multi-Technology Contactless Smart Card and Prox Reader
HID Prox and AWID (125 kHz) or Indala Prox
Mullion Mount, Terminal Strip
Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant)
8100 = HID
8140 = Indala D
S = Silver
HM = HID MIFARE (default)
HC = HID MIFARE (non-default)
CM = MIFARE
DF = DESFire
SmartID SPK10 Multi-Technology Contactless Smart Card and Prox Keypad Reader
HID Prox and AWID (125 kHz) or Indala Prox
Mullion Mount, Terminal Strip
Wiegand, Clock-and-Data, RS232, RS485 or RS422 (RoHS Compliant)
8101 = HID
8141 = Indala D
S = Silver
HM = HID MIFARE (default)
HC = HID MIFARE (non-default)
CM = MIFARE
DF = DESFire
1 All part numbers generated by the above grid (except HM = HID MIFARE) require an additional accompanying “format configuration”. The format configuration is a separate part number that is combined on a PO with the above part number to make up the full definition of a reader. Format configurations are either generic (for public use) or custom. For generic format information, see SmartID – Generic Configuration Document ( http://www.hidcorp.com/documents/smartid_configuration_guide_en.pdf
). For custom format definition, see
Custom SmartID Format, MIFARE or DESFire Requirements on subsequent page. For more information on applications and format configurations, reference the whitepaper SmartID
Application and Configurations ( http://www.hidcorp.com/documents/smartid_apps_configs_wp_en.pdf
). The HM application provides standard reader configurations, including beeper and LEDs. The HC application allows for configuration of beeper and LEDs.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 52 of 70
13.56 MHz How to Order Guide, – D00529, E.0
SmartTOOLS Card Programming Software and Devices Part Numbers and Options
All SmartID Programmers are now located in the Credential Programmer How To Order Guide.
SmartID Desktop Reader/Writer Part Numbers and Options
Contactless Smart Card Reader/Writer, Desktop, USB and RS232
800-1063*
800-8240*
SmartID SWD100 Reader/Writer, MIFARE & ISO14443-4 DESFire & SmartxMX,
USB with PC/SC Protocol
SmartID SWD100 Reader/Writer, MIFARE & ISO14443-4 DESFire & SmartxMX,
RS232 with T=CL Protocol
To complete the part number, specify formatting information.
For generic format information, see SmartID – Generic Configuration Document ( http://www.hidcorp.com/documents/smartid_configuration_guide_en.pdf
).
(http://www.hidcorp.com/documents/smartid_configuration.pdf)
For custom format definition, see Custom Format MIFARE® or DESFire® Reader Ordering Guide .
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 53 of 70
13.56 MHz How to Order Guide, – D00529, E.0
SmartID Reader Cross Reference
GEN 1 & 2
Generation 1 Generation 2
Part Number Description
800-8030
800-8060
800-8045
800-8075
800-8061
800-8060
800-8063
800-8076
800-8075
800-8063
800-8062
ISO 14443-3 MIFARE Sector
ISO 14443-4 DESFire reader with MIFARE configuration
ISO 14443-3 MIFARE PIN Reader
ISO 14443-4 DESFire PIN reader with MIFARE configuration
ISO 14443-3 DESFire reader
ISO 14443-3 DESFire reader (FIPS 201 mid point compliant)
ISO 14443-3 DESFire and MIFARE reader (FIPS 201 mid point compliant)
ISO 14443-3 DESFire PIN reader
ISO 14443-3 DESFire PIN reader (FIPS 201 mid point compliant)
ISO 14443-3 DESFire and MIFARE PIN reader (FIPS 201 mid point compliant)
ISO 14443-3 Dual MIFARE reader
800-8077
800-8080
800-8085
ISO 14443-3 Dual MIFARE PIN reader
ISO 14443-4 reader (ISO 7816-4, PIV II Compliant)
ISO 14443-4 PINpad reader (ISO 7816-4, PIV II Compliant)
800-8030TC
800-8045TC
ISO 14443-4 Reader/Writer, T=CL Protocol
ISO 14443-4 Reader/Writer with PINpad, T=CL Protocol
800-8030
800-8045
ISO 14443-4 Reader/Writer, 3964 Protocol
ISO 14443-4 Reader/Writer with PINpad, 3964 Protocol
800-8100CM SmartTRANS reader (ISO 14443 & HID Prox), MIFARE
800-8110CM SmartTRANS PINpad reader (ISO 14443 & HID Prox), MIFARE
800-8100DF
800-8110DF
SmartTRANS reader (ISO 14443 & HID Prox), DESFire
SmartTRANS PINpad reader (ISO 14443 & HID Prox), DESFire
Part Number 1 Description
8030DSCM
8031DSCM
8030DSDF
8031DSDF
8030DSDM
8031DSDM
N/A
N/A
8030DSTC
8031DSTC
8030DSRW
8031DSRW
8100DSCM
8101DSCM
8100DSDF
8101DSDF
SmartID S10 Read Only, Custom MIFARE
SmartID SK10 Read Only Keypad, Custom MIFARE
SmartID S10 Read Only, DESFIRE
SmartID SK10 Read Only Keypad, DESFIRE
SmartID S10 Read Only, DUAL MIFARE
SmartID SK10 Read Only Keypad, DUAL MIFARE
Not Available. See iCLASS FIPS 201 Readers
Not Available. See iCLASS FIPS 201 Readers
SmartID SW100 Reader/Writer, MIFARE & ISO14443-4 DESFire &
SmartMX, T=CL Protocol
SmartID SW100 Reader/Writer with Keypad , MIFARE & ISO14443-4
DESFire & SmartMX, T=CL Protocol
SmartID SW100 Reader/Writer, 3964 Protocol
SmartID SW100 Reader/Writer with Keypad, 3964 Protocol
SmartTRANS SP10 Read Only, HID + AWID Prox, Custom MIFARE
SmartTRANS SPK10 Read Only Keypad, HID + AWID Prox, Custom
MIFARE
SmartTRANS SP10 Read Only, HID + AWID Prox, Custom DESFire
SmartTRANS SPK10 Read Only Keypad, HID + AWID Prox, Custom
DESFire
Not Available. See iCLASS FIPS 201 Readers 800-8100 SmartTRANS reader (ISO 14443 & HID Prox), PIVII N/A
800-8110 SmartTRANS PINpad reader (ISO 14443 & HID Prox), PIVII N/A Not Available. See iCLASS FIPS 201 Readers
1 All format configurations previously ordered with GEN 1 parts are backward compatible with GEN 2. When ordering GEN 2 product, order using the same format configuration number previously used when ordering GEN 1 product.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 54 of 70
13.56 MHz How to Order Guide, – D00529, E.0
GEN 2 & FlexSmart
FlexSmart
Part Number
6055Byy0000
6055Byyxxxx
6055Byy0000
Description
HID MIFARE 6055 (used for read only)
HID MIFARE 6055 (used for read only)
HID MIFARE 6055 (used for read/write)
Part Number
8030DSHM
8030DSHC
8030DSTC
6055Byy0000
6074Ayy00
6074Ayyxx
HID MIFARE 6055 (used for read-only and read/write) N/A
HID MIFARE 6074 (Legacy) 8030DSHM
HID MIFARE 6074 (Legacy)
1 xxxx signifies non-0000 configuration
8030DSHC
SmartID Gen 2
Part Number 1
6075AKN0000
6075AKNxxxx
Description
FlexSmart HID MIFARE
FlexSmart HID MIFARE, non default configuration
6071AKN000000 FlexSmart HID MIFARE, Keypad
6071AKNxxxxxx FlexSmart HID MIFARE, Keypad, non default configuration
6076AKNxxxx FlexSmart Custom MIFARE
6072AKNxxxxxx FlexSmart Custom MIFARE, Keypad
6077AKNxxxx FlexSmart Custom DESFIRE
6073AKNxxxxxx FlexSmart Custom DESFIRE, Keypad
Part Number 2
8030DSHM
8030DSHC
8031DSHM
8031DSHC
8030DSCM
8031DSCM
8030DSDF
8031DSDF
Description
SmartID S10 Mullion Read Only, HID MIFARE*
SmartID S10 Mullion Read Only, HID MIFARE*
SmartID SK10 Mullion Read Only Keypad, HID MIFARE*
SmartID SK10 Mullion Read Only Keypad, HID MIFARE*
SmartID S10 Mullion Read Only, Custom MIFARE*
SmartID SK10 Mullion Read Only Keypad, Custom MIFARE*
SmartID S10 Mullion Read Only, Custom DESFire*
SmartID SK10 Mullion Read Only Keypad, Custom DESFire*
N/A * For wallswitch requirements, this part must be ordered with every reader 8090AS SmartID Single Gang Electrical Box Cover
1 xxxx signifies non-0000 configuration
2 When ordering GEN 2 SmartID product with FlexSmart custom configurations, modify the format reference number (FMxxxx) previously used when ordering FlexSmart product as follows: (a) add 02 to FMxxxx and (b) separate FM and first x with a -. Thus the FlexSmart format configuration FMxxxx turns to 02FM-xxxx when ordering SmartID
GEN 2 product.
SmartID (GEN 2) & HID MIFARE
HID MIFARE SmartID GEN2
Description
SmartID S10 Read Only, HID MIFARE
SmartID S10 Read Only, HID MIFARE (non-default)
SmartID SW100 Read/Write, T=CL Protocol
Not Available
SmartID S10 Read Only, HID MIFARE
SmartID S10 Read Only, HID MIFARE
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 55 of 70
13.56 MHz How to Order Guide, – D00529, E.0
C -
SmartID
®
MIFARE
®
and DESFire
®
Reader Custom Format Request Form
Reader Part Numbers:
8030/8100 MIFARE ® or DUAL MIFARE 8030/8100 DESFire ®
8031/8101 MIFARE or DUAL MIFARE with Keypad 8031/8101 DESFire with Keypad
Description: These custom MIFARE or DESFire readers offer a complete selection of keys and card formats for adding to existing installations or facilitating companies to manage their own keys and formats. This worksheet will help you to gather information that will be required to process orders for these readers.
Specify the following
A - Custom Format Number:
B - New Custom MIFARE Format:
Use MAD (Yes/No): Yes No
If Yes, AID (recommended):
If No, Sector:
Block where data is located:
Starting bit:
Number of bits to output:
Block where data is located (2nd, DUAL Only)
Starting bit (2nd, DUAL Only)
Number of bits to output (2nd, DUAL Only)
Custom Keys (Yes/No): Yes No
New Custom DESFire Format:
Specify APPLICATION to store data:
File to store data:
Address in file where data is located:
Starting bit:
Number of bits to output:
Custom Keys (Yes/No) :
Security Level:
Yes No
Plain communication
Plain communication secured by DES/3DES MACing
Fully DES/3DES enciphered communication
Communication mode of the file is used
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 56 of 70
13.56 MHz How to Order Guide, – D00529, E.0
D -
Output format:
Clock-and-Data Number of digits:
Wiegand Number of bits: Left Parity: Odd
Calculation First Bit:
Right Parity: Odd
Even
Last Bit:
Even
E -
User interface:
Card reading beep (Yes/No):
Keypad key press beep (Yes/No):
LED, Left:
When combining green and red are combined, the
LED will set to yellow.
Serial
Yes
Yes
No
No
Set LED constant green
Calculation First Bit:
Number of chars: Type (RS232/RS485/RS422):
Last Bit:
Baud rate:
Set LED green when card is read
Set LED green when key is stroked
Set LED constant red
Set LED red when card is read
Set LED red when key is stroked
LED, Right: Set LED constant green
When green and red are combined, the LED will set to yellow.
Set LED green when card is read
Set LED green when key is stroked
Set LED constant red
Set LED red when card is read
Set LED red when key is stroked
Input pin 1 (When active to GND): Used for LED (Left/Right):
LED off
LED to Green
LED to Red
LED to Yellow
Left Right
Input pin 2 (When active to GND): Used for LED (Left/Right):
LED off
LED to Green
LED to Red
LED to Yellow
Left Right
Transfer all keys securely and do not place keys in this Order Guide. All custom formats require additional time to develop and test. Required is a customer sign-off before fulfilling the first order.
Once your key is encrypted using the HID Key Wrapper program, fill-in the following information:
Wrapped Keys:
Access Key Sector
Access Key MAD
Wrapping Password (Pass Phrase) :
DISTRIBUTE OVER PHONE ONLY
Using the HID Key Wrapper program keeps your key secure during order processing.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 57 of 70
13.56 MHz How to Order Guide, – D00529, E.0
FlexSmart Readers Part Numbers and Options (Asia-Pacific Region Only)
Reader Description
Base
Part No.
Current
Rev. No.*
Color Options 1 Hardware Options
Configuration
Setting Options 2
Card
Read
Mode 3
CSN Wiegand
Output Mode 4
Custom
Key 5 Keypad
6 Custom 7
HID FlexSmart ® MIFARE Reader, Read only Capability, Reads HID
Formats in sector 1 and/or CSN, Wiegand or C&D output
(RoHS Compliant)
HID FlexSmart ® MIFARE Reader, Read Only Capability, Custom
Configurable, Wiegand or C&D output
(Old Part # MX200) (RoHS Compliant)
HID FlexSmart ® DESFire ® Reader, Read Only Capability, DESFire ®
Custom Configurable, Wiegand or C&D output
(Old Part # DX200) (RoHS Compliant)
HID FlexSmart ® MIFARE Keypad Reader,
Read only Capability, Reads HID Formats in sector 1 and/or CSN,
Wiegand or C&D (RoHS Compliant)
6075
6076
6077
6071
B
A
A
A
K = Black Arch Slim
Z = No Bezel
K = Black Arch Slim
Z = No Bezel
K = Black Arch Slim
Z = No Bezel
K = Black
N = Pigtail 18” (0.5 meter)
N = Pigtail 18” (0.5 meter)
N = Pigtail 18” (0.5 meter)
N = Pigtail 18” (0.5 meter)
00 01
02 03 0 1 2
00 01
02 03
00 01
02 03
00 01
4
3
02 03 0 1 2
0 1
2 4
0 1
2 4
0 1
2 4
0 1
2 4
0
1
1
0
N/A
N/A
N/A
0 9
XXXX Y
XXXX Y
XXXX Y
N/A
HID FlexSmart
DESFire ®
® MIFARE Keypad Reader, Read Only Capability,
Custom Configurable, Wiegand or C&D output
(RoHS Compliant)
Custom Configurable, Wiegand or C&D output
HID FlexSmart ® DESFire ® Keypad Reader, Read Only Capability,
6072
6073
A
A
K = Black
K = Black
N = Pigtail 18” (0.5 meter)
N = Pigtail 18” (0.5 meter)
00 01
02 03
00 01
02 03
4
3
0 1
2 4
0 1
2 4
1
1
0 9 XXXX Y
0 9 XXXX Y
*Revision numbers and availability are subject to change without notice. Consult factory for availability. All trademarks and registered trademarks are the properties of their respective companies.
2
01 = Beep off, LED normally red, reader flashes green on tag read 05 = Beep off, LED normally red, host must flash green
02 = Beep on, LED normally off, reader flashes green on tag read 06 = Beep on, LED normally off, host must flash red and/or green
3
(RoHS Compliant)
1 Refer to the “13.56 MHz Accessories” page in this guide for additional bezel options.
6055, 6075. 6076 and 6077 Model Configuration Setting Options are as follows (factory programmed):
Card Read Modes are as follows (factory programmed): Refer to the "HID FlexSmart ®
0 = HID Data only (Sector 1, MIFARE Application Directory or Sector Location, only applies if “CSN Wiegand output Mode” = 0)
00 = Beep on, LED normally red, reader flashes green on tag read 04 = Beep on, LED normally red, host must flash green
03 = Beep off, LED normally off, reader flashes green on tag read 07 = Beep off, LED normally off, host must flash red and/or green
Reader Wiegand Output Configuration" Guide for more details.
1 = Card Serial Number (CSN) Only 2 = HID MIFARE Data or CSN 3 = DESFire ® Custom 4 = MIFARE Custom
4 Card Serial Number (CSN) Wiegand Output Modes are as follows (factory programmed). Refer to the "HID MIFARE Reader Wiegand Output Configuration" Guide for more details.
0 = 32 bit 1 = 32 bit reverse (as in 6055A) 2 = 26 bit 3 = 34 bit 4 = 40 bit “Card Serial Number (CSN) Wiegand Output Modes” options 1, 2, 3, and 4 cannot be used if “Card Read Mode” = 0
5
6
Custom Key: 0 = Standard keys, 1 = Custom keys
7
Keypad: 0 = Buffer one key, no parity, 4 bit message 9 = Buffer one key, add compliment, 8 bit message (Dorado)
Consult Factory.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 58 of 70
13.56 MHz How to Order Guide – D00529, E.0
Custom Format MIFARE
®
or DESFire
®
Reader Ordering Guide
Reader Part Numbers:
6076 (MIFARE
®
)
6072 (MIFARE
®
With Keypad)
6077 (DESFire
®
)
6073 (DESFire
®
With Keypad)
Description: These custom MIFARE or DESFire
®
readers offer a complete selection of keys and formats for adding to existing installations or facilitating companies to manage their own keys and formats. This worksheet will help you to gather information that will be required to process orders for these readers.
Specify the following
A -
B -
Custom Format Number
New Custom MIFARE Format
.
C -
Specify Sector
Block where data is located
Starting bit
Number of bits to output
Custom Keys (Yes/No)
New Custom DESFire ® Format
.
.
.
.
.
Specify APPLICATION to store data
File to store data
Number of bits to output
.
.
.
Custom Keys (Yes/No) .
All keys should be transferred securely and not placed in this Order Guide. All custom formats require additional time to develop and test, with a customer sign-off before the first order can be fulfilled.
Once your key is encrypted using the HID Key Wrapper program, fill-in the following information:
Wrapped Key:
.
Wrapping password (Pass Phrase):
.
Using the HID Key Wrapper program will keep your key secure during order processing.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 59 of 70
13.56 MHz How to Order Guide – D00529, E.0
Edge Readers
Edge
™
Solo Part Numbers and Options
Edge
™
Solo Product Description
EdgePlus ™ Solo ES400
Single door, IP-based stand-alone controller with built in web interface.
Allows external connection to any Wiegand output (up to 128 bit ID) or most HID Clock & Data readers. Indoor use only.
Stand-alone integrated access control
EdgeReader ™ Solo ESR40
Single door, IP-based stand-alone controller with built in web interface, with Integrated R40 iCLASS reader. Indoor use only.
Stand-alone integrated access control
EdgeReader Solo ESRP
Single door, IP-based stand-alone controller with built in web interface, with Integrated RP40 Multi-Class reader. Indoor use only.
Stand-alone integrated access control
Base
Part
83000
83120
83125
For Technical Support, call 800-237-7769 (Press option 4).
For Sales support, call 877-276-3346
*Revision numbers and availability are subject to change without notice.
1 0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
Example Part #:
EdgePlus Solo ES400: 83000BKE
EdgeReader Solo ESR40: 83120AKI000
EdgeReader Solo ESRP40: 83125BKI000
Rev.
No.*
B
B
B
Color Hardware Configuration
K = Black E = Externally-mounted reader
K = Black I = Integrated reader
K = Black I = Integrated reader
Configuration Option
N/A
00 = Beep on, LED normally red, reader flashes green on tag read
00 = Beep on, LED normally red,
Reader flashes green on tag read iCLASS
Elite Key 1
N/A
0
0
December 2011 © 2007 - 2012 HID Global Corporation. All rights reserved Page 60 of 70
13.56 MHz How to Order Guide – D00529, E.0
Edge
™
Solo Kit Part Numbers and Options
Edge ™ Solo Product Description
Base
Part
Kit EdgePlus Solo ES400 with (1) RP15 and
(20) iCLASS 37bit Cards
Kit EdgePlus Solo ES400 with (1) RP15 and
(10) iCLASS 37bit Keyfobs
Kit EdgePlus Solo ES400 with (1) R15 and
(20) iCLASS 37bit Cards
Kit EdgePlus Solo ES400 with (1) R15 and
(10) iCLASS37bit Keyfobs
K83000
K83000
K83000
K83000
Rev
No.*
B
B
B
B
Kit EdgeReader Solo ESR40 with (20) iCLASS Cards K83120 A
Color
Hardware
Configuration
K = Black I = Integrated reader
Kit EdgeReader Solo ESR40 with (10) iCLASS Keyfobs K83120 A
Kit EdgeReader multiCLASS Solo ESRP40 with
(20) iCLASS Cards
K83125
Kit EdgeReader Solo multiCLASS ESRP40 with
(10) iCLASS Keyfobs
K83125
For Technical Support, call 800-237-7769 (Press option 4).
For Sales support, call 877-276-3346
*Revision numbers and availability are subject to change without notice.
1 0 = Standard (Reads all iCLASS cards with unique keys diversified from HID master key)
B
B
K = Black I = Integrated reader
K = Black I = Integrated reader
K = Black I = Integrated reader
Configuration Option
N/A
N/A
N/A
N/A
00 = Beep on, LED normally red, reader flashes green on tag read
00 = Beep on, LED normally red, reader flashes green on tag read
00 = Beep on, LED normally red, reader flashes green on tag read
00 = Beep on, LED normally red, reader flashes green on tag read iCLASS
Elite Key 1
N/A
Reader /
Credential
Options
PC
N/A PK
0
0
0
0
N/A
N/A
C
K
C
K
RC
RK
December 2011 © 2007 - 2012 HID Global Corporation. All rights reserved Page 61 of 70
13.56 MHz How to Order Guide – D00529, E.0
Example Part #:
Kit EdgePlus Solo ES400 with R15 and Cards: K83000BKE000-RC
Kit EdgeReader Solo ESR40 with Keyfobs: K83120AKI000-K
Kit EdgeReader Solo ESRP40 with Cards: K83125BKI000-C
Additional Card Packs and Keyfobs
Edge Solo Card/Fob Description Base Part
Edge Solo Card Pack - (20)
EdgeSolo logo iCLASS 37bit Cards
200
Edge Solo Key Pack – (10) iClass Keyfobs 37bit 205
Memory Programming
0 P
Front
Packaging
C
Back
Packaging
G
Card
Numbering
M
Slot Punch
V
0 P K N M N
Option /
Custom
EDGE
December 2011
Example Part #:
Edge Solo Card Pack : 2000-PCGMV-EDGE
Edge Solo Key Pack : 2050-PKNMN
© 2007 - 2012 HID Global Corporation. All rights reserved Page 62 of 70
13.56 MHz How to Order Guide – D00529, E.0
13.56 MHz Accessories
Part No. Description
6132AKB
6132AGB
6132AKC
6132AGC
6132AKD
6132AGD
6132AKE
6132AGE
6132AK
6132AG
6410-303-01
400-2D71-06 iCLASS Reader Accessories
6303-104-01 iCLASS Mini-Mullion Reader Mounting Plate, Any Color (works with Rev C R10, RS10 and RW100)
6309-103-01
6402-103-01
6403-109-01
6094-101-01 iCLASS Mullion Reader Mounting Plate, Any Color (works with Rev C R15, RP15, RS15, RSP15, RW150, R15-T, RP15-T) iCLASS EU/Asian Reader Mounting Plate, Any Color (works with Rev C R30, RW300, R30-T) iCLASS Wall Switch Reader Mounting Plate, Any Color (works with Rev C R40, RP40, RS40, RSP40, RW400, R40-T, RP40-T) iCLASS Wall Switch Keypad Reader Mounting Plate, Any Color (works with Rev C RK40, RPK40, RSK40, RSPK40, RWK400,
RK40-T, RPK40-T) iCLASS Mini-Mullion Reader Spacer, Black (works with R10, RS10, RW100 and R10-T) iCLASS Mini-Mullion Reader Spacer, Gray (works with R10, RS10, RW100 and R10-T) iCLASS Mullion Reader Spacer, Black (works with R15, RP15, RS15, RSP15, RW150, R15-T, RP15-T) iCLASS Mullion Reader Spacer, Gray (works with R15, RP15, RS15, RSP15, RW150, R15-T, RP15-T) iCLASS EU/Asian Reader Spacer, Black (works with R30, RW300, R30-T) iCLASS EU/Asian Reader Spacer, Gray (works with R30, RW300, R30-T) iCLASS Wall Switch Reader Spacer, Black (works with R40, RP40, RS40, RSP40, RW400, R40-T, RP40-T) iCLASS Wall Switch Reader Spacer, Gray (works with R40, RP40, RS40, RSP40, RW400, R40-T, RP40-T) iCLASS Wall Switch Keypad Reader Spacer, Black (works with RK40, RPK40, RSK40, RSPK40, RWK400, RK40-T, RPK40-T) iCLASS Wall Switch Keypad Reader Spacer, Gray (works with RK40, RPK40, RSK40, RSPK40, RWK400, RK40-T, RPK40-T) multiCLASS Magnetic Stripe Reader Backplate, Integrated Mag Reader and Read Head, Black. iCLASS reader security screw (Qty 1)
SmartID Reader Accessories
8090AS
9287AS
SmartID Single-gang Electrical Box Cover
SmartID Spacer Kit
0300A
0055A
0056A
0057A
SmartID Tamper Switch
SmartID Screw Cover
SmartID Black Plexiglas ® Cover
SmartID 8 Pin Connector
HID 6055 MIFARE Reader Accessories
5395-104-01
5395-104-02
5395-104-03
5395-104-04
Classic cover, 6055 MIFARE Reader (Rev. C) - White
Classic cover, 6055 MIFARE Reader (Rev. C) - Beige
Classic cover, 6055 MIFARE Reader (Rev. C) - Black
Classic cover, 6055 MIFARE Reader (Rev. C) - Charcoal Gray
New Look
2
5395-371-01
5395-371-02
5395-371-04
5395-371-05
Designer cover, 6055 MIFARE Reader (Rev. C) - Black
Designer cover, 6055 MIFARE Reader (Rev. C) - Charcoal Gray
Designer cover, 6055 MIFARE Reader (Rev. C) - Wave Blue
Designer cover, 6055 MIFARE Reader (Rev. C) - White
HID FlexSmart
®
Reader Series
FPZ3511H
FPZ3517H
HID Bezel Cover, Arch Slim Reader - Black
HID Bezel Cover, Arch Slim Reader - Beige
FPZ3521H
FPZ3527H
FPZC1511H
FPZC1514H
HID Bezel Cover, Arch Wall Switch Reader - Black
HID Bezel Cover, Arch Wall Switch Reader - Beige
HID Bezel Cover, Wave Slim Reader - Black
HID Bezel Cover, Wave Slim Reader - Blue
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 63 of 70
13.56 MHz How to Order Guide – D00529, E.0
Part No. Description
HID FlexSmart ® Reader Series (continued)
FPZC1521H HID Bezel Cover, Wave Wall Switch - Black
FPZC1524H HID Bezel Cover, Wave, Wall Switch Reader - Blue
Indala
02-0004-01 Universal Power Supply for the Indala ProxSmith
iCLASS Credentials
CONFIG-0001
CONFIG-0002
Configuration Card Pack, HADP Addresses 0-8, Non-LCD Readers
Configuration Card Pack, HADP Addresses 0-8, LCD Readers
1 To ensure security of the format and cards, a Software License Agreement must be signed by the final user of the 3012AKN00, 3012ANS00, and be on file at HID prior to shipment.
2 Developer's Resource CD includes: Serial Protocol Documentation and Developer's Test Program to assist in developing custom MIFARE software applications.
3 Demo CD Includes: MIFARE Documentation and Sample Application Program.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 64 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Programming Platform
HID Global's iCLASS Programming Platform allows the programming of a configured iCLASS card through a FARGO
TM
HDP printer, increasing the flexibility of programming options for customers.
Through this platform, the HID Access Control Application is programmed directly to a card with unique facility codes and card numbers. This tool allows a dealer or integrator to support multiple customers with a stock of configured cards, programming the cards only when the customer wishes. For the dealer or integrator, increase flexibility offering fully programmed iCLASS cards at a moment’s notice.
End-users benefit from this platform by maintaining control over their facility codes and card numbers, printing identification badges within their own facility. Use the iCLASS Programming Platform to replace lost badges on the spot instead of having to experience any delays from re-ordering an iCLASS card from their local dealer or integrator.
Components of the iCLASS Programming Platform
• Configured iCLASS Credentials
• iCLASS Programming Platform Encoder installed within an Fargo HDP Printer
• iCLASS Programming Platform Smart Card containing a specific facility code and the number of credential credits purchased
• Fargo HDP 5000 or HDPii Printer
• Asure ID Card Personalization Software (Enterprise Version)
Configured iCLASS Credentials
Configured iCLASS Credentials come with all your standard card body options, including PVC and
Composite makeup, from 2k to 32k in size. A configured iCLASS Credential has the Access Control
Application loaded with the application lay-out defined, but does not contain specific facility codes or card numbers. These are added through the iCLASS Programming Platform.
Encoder
The iCLASS Programming Platform Encoder is a specialized version of an HID encoder that installs directly to the HDP Printer. This encoder communicates with the iCLASS Programming Platform Smart
Card and Asure ID Card Personalization Software to program cards with the appropriate facility code, card number and other data. In a single pass, program this card data, and enable a personalized photo, background image or other security features through the Fargo printer.
Smart Card with Facility Code and Credential Credits
Order the iCLASS Programming Platform Smart Card with a specific facility code and required number of credential credits. When inserting this smart card into an external contact smart card reader (OMNIKEY
® readers offer several options), the iCLASS Programming Platform Smart Card communicates with the iCLASS Programming Platform Encoder allowing the programming of a configured iCLASS Credential with the appropriate facility code and other information from Asure ID.
FARGO
®
HDP Printers and Asure ID
®
are products from HID Global. Go to www.hidglobal.com >
Solutions > Fargo Printers to find your local Authorized Integrator.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 65 of 70
13.56 MHz How to Order Guide – D00529, E.0 iCLASS Programming Platform Ordering Guide
The iCLASS Programming Platform consists of configured cards, an encoder and smart cards used in combination with an HDP printer and Asure ID software. When completing this order, ensure discussing all choices with the user.
I. Configured iCLASS Programming Platform Cards
Ensure checking each required option with the appropriate choice to fulfill a completed order.
Base Model 200 Standard PVC 210 Composite 40% Polyester / PVC * iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not
Required.
Front Packaging (Check One)
G - Plain White with Gloss Finish
Back Packaging (Check One)
G - Plain White with Gloss Finish 1
Card Numbering 3 (Check One)
N - No External Card Numbering
Slot Punch (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
Front Packaging
Back Packaging
Enter your final card options from checked boxes above. Example: 2001CGGNN
Final Part Number
1 Cards ordered with plain white front and back packaging still have a small “HID logo” " " and reference number printed in the lower left-hand corner
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
II. iCLASS Programming Platform Encoder
089182 H5K-SDI-D-ENCODER – contains docking station for insertion into the HDP Printer bay two (2)
089181 H5K-SDI-ENCODER – for insertion into the HDP Printer bay zero (0)
III. iCLASS Programming Platform Smart Card
Base Model VCI-SCCC VCI-SCCF
Customers should choose VCI-SCCC if they wish to use any card number contained within the range permitted by the format number selected.
For example, format number H10301 allows for 65,535 card numbers and customers who select VCI-SCCC use any of those numbers.
VCI-SCCF restricts the card number to the next in the series. If the customer has previously ordered and used card numbers 1 – 50, the next set of numbers start at 51. Using VCI-SCCF prevents duplication of card numbers within the facility code and format range.
Facility Code:
Format Number:
iCLASS Elite ICE Number (if applicable):
Number of Credits:
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 66 of 70
13.56 MHz How to Order Guide – D00529, E.0
Corporate 1000™ Format Request & Authorization Form
Corporate 1000 is a 35-bit card format that is developed specifically for use by individual end-user organizations. Organizations must qualify, formally enroll and be accepted by HID Global Corporation.
The Corporate 1000 Format is offered to large, multi-location, and end-user organizations which use HID access control readers and cards. In this program, the end-user has the flexibility to choose any access control hardware/software platform and any
HID System Provider. As the end-user utilizing the Corporate 1000 Program, fill in your company information in TABLE I.
Ensure all fields are complete for the primary and secondary (if desired) authorized contacts within your company.
TABLE I: Your Company’s Primary and Secondary Contacts
Information Primary Company Contact Secondary Company Contact
Company Name
Mailing Address
City
State/Province
Country
Zip/Postal Code
Contact Name
Title
Contact Signature
Phone Number
X X
Fax Number
E-mail Address
Card numbers available within the Corporate 1000 format are 0 – 1,048,575.
Indicate the card number in which your first order should start: Enter start number here.
All card numbers following this number will be “blocked” from use. If you do not specify a card start number, your first order will start at one (1). Should you require assistance, contact your systems provider or HID directly.
Added card security:
Invisible Ink Advantage ® OVD Hologram Micro-fine Printing Signature Panel
Once accepted into the Corporate 1000 Program, HID shall grant a royalty free license to use the Corporate 1000 Format within your organization. Sign below to enroll in this program and to confirm your acceptance of the License Agreement.
ACCEPTANCE OF HID CREDENTIAL PROGRAM LICENSE AGREEMENT
The undersigned party hereby accepts and agrees to be bound by the terms and conditions of the HID Credential Program.
License Agreement is located at www.hidglobal.com/pdfs/credential_license.pdf
, pursuant to which a license is granted to the undersigned party authorizing the use of certain credential formats in connection with participation by the undersigned in the
HID Corporate 1000 Program.
Dated:
Company Name :
Authorized Signature : X
Contact Name:
Title :
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 67 of 70
13.56 MHz How to Order Guide – D00529, E.0
To ensure the security of your card format, authorize any HID System Provider to purchase and manage your Corporate 1000 cards on your behalf. Enter authorized HID System Provider information in Table II, and HID System Installers in Table III.
Use this form to communicate all authorization concerning your Corporate 1000 format. It is recommended for each end-user to maintain an original copy of this form listing all authorizations.
TABLE II: Authorized HID System Providers
Company # 1 Company # 2
Company Name
Contact Name
Title
Address
Phone Number
Fax Number
E-Mail Address
Authorized End-User Name
Authorized End-User Signature X X
Date
TABLE III: Authorized HID System Installers
Company # 1 Company # 2
Company Name
Contact Name
Title
Address
Phone Number
Fax Number
E-Mail Address
Authorized End-User Name
Authorized End-User Signature X X
Date
Send to HID Global for approval and processing by faxing: 949-732-2359.
For assistance, contact your Customer Service Representative. To add or remove authorizations, submit an HID Global
Corporate 1000 Change Form.
For Internal Use Only:
HID Sales Manager:
Print Name
Issued Corporate 1000 Format No.:
X
Signature Date
Entered by HID Global after approval.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 68 of 70
13.56 MHz How to Order Guide – D00529, E.0
iCLASS Elite Program™ Request & Authorization Form
The iCLASS Elite program includes a credential format and custom authentication key. Use any format, including the HID
Corporate 1000 format. Corporate 1000 is a 35-bit card format available for qualified end-users by formal enrollment and acceptance by HID Global. A custom authentication key provides increase security. HID assigns the key to guarantee uniqueness, and programs the site-specific readers and credentials.
With the iCLASS Elite program, the end-user has the flexibility to choose any access control hardware/software platform, or any
HID System Provider. As the iCLASS Elite program end-user, enter your company information in TABLE I. Ensure all fields are complete for the primary and secondary (if desired) authorized contacts within your company.
TABLE I: Your Company’s Primary and Secondary Contacts
Information Primary Company Contact Secondary Company Contact
Company Name
Mailing Address
City
State/Province
Country
Zip/Postal Code
Contact Name
Title
Contact Signature X X
Phone Number
Fax Number
E-mail Address
Enter the program features:
35-Bit Credential Format (if different, enter: ) Custom Authentication Key
Once accepted into the iCLASS Elite Program, HID shall grant a royalty free license to use the iCLASS Elite Program within your organization. Sign below to enroll in this program and your acceptance of the License Agreement.
ACCEPTANCE OF HID CREDENTIAL PROGRAM LICENSE AGREEMENT
The undersigned party hereby accepts and agrees to be bound by the terms and conditions of the HID Credential Program.
License Agreement is located at www.hidglobal.com/pdfs/credential_license.pdf
, pursuant to which a license is granted to the undersigned party authorizing the use of certain credential formats in connection with participation by the undersigned in the
HID iCLASS Elite Program.
Dated:
Company Name :
Authorized Signature : X
Contact Name:
Title :
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 69 of 70
13.56 MHz How to Order Guide – D00529, E.0
To ensure the security of your card format, authorize any HID System Provider to purchase and manage your iCLASS Elite
Credential format on your behalf. Enter authorized HID System Provider information in Table II, and System Installers in Table
III.
Use this form to communicate all authorization concerning your iCLASS Elite Credential format. It is recommended for each end-user to maintain an original copy of this form listing all authorizations.
TABLE II: Authorized HID System Providers
Company # 1 Company # 2
Company Name
Contact Name
Title
Address
Phone Number
Fax Number
E-Mail Address
Authorized End-User Name
Authorized End-User Signature
Date
X X
Company Name
Contact Name
Title
Address
Phone Number
Fax Number
TABLE III: Authorized HID System Installers
Company # 1 Company # 2
E-Mail Address
Authorized End-User Name
Authorized End-User Signature X X
Date
Send to HID Global for approval and processing by faxing: 949-732-2359.
For assistance, contact your Customer Service Representative. To add or remove authorizations, submit an HID Global iCLASS Elite Program Change Form.
For Internal Use Only:
HID Sales Manager:
Print Name
Issued iCLASS Elite Program Format No.:
X
Signature Date
Entered by HID Global after approval.
February 2012 © 2007 - 2012 HID Global Corporation. All rights reserved Page 70 of 70
advertisement
Related manuals
advertisement
Table of contents
- 1 13.56MHz HtoG
- 3 Contents
- 4 Overview
- 5 13.56 MHz Reader
- 8 iCLASS Credentials
- 9 Basics of Ordering iCLASS Contactless Smart Credentials
- 10 Credentials
- 10 200/210 - iCLASS Card Ordering Guide
- 11 202/212 - Combination Card (iCLASS / Prox) Ordering Guide
- 12 204 - iCLASS Wiegand Card Ordering Guide
- 13 205 - iCLASS Key Ordering Guide
- 14 206 - iCLASS Tag Ordering Guide
- 15 208 - iCLASS Clamshell Card Ordering Guide
- 16 232 / 242 - iCLASS / Other HF - Combination Card Ordering Guide
- 17 252 / 262 - iCLASS / Other 13.56MHz / Prox - Combination Card Ordering Guide
- 19 1430/1440/1436/1446 – MIFARE® Card Ordering Guide
- 20 1431/1441/1437/1447–Combination (MIFARE®/Prox) Card Ordering Guide
- 21 1434/1444 – MIFARE® Keyfob Ordering Guide
- 22 1435/1445 – MIFARE® Adhesive Tag Ordering Guide
- 23 1450/1456 – MIFARE® DESFire® EV1 Card Ordering Form Guide
- 24 1451/1457 – Combination (MIFARE® DESFire® EV1 / PROX) Card Ordering Guide
- 25 FlexSmart to HID Credential Cross Reference
- 26 Custom Credentials
- 26 Artwork Checklist
- 27 Electronic Artwork Checklist
- 28 Anti-Counterfeiting Descriptions
- 29 Custom Card Artwork Placement and Inkjet Location Guides
- 30 Tag Credentials
- 31 Clamshell Cards
- 32 iCLASS Readers
- 33 iCLASS Read-Only Reader Part Numbers and Options
- 34 multiCLASS with HID or Indala Prox Read-Only Reader Part Numbers and Options
- 35 multiCLASS Magstripe Read-Only Reader Part Numbers and Options
- 36 multiCLASS with EM4102 Prox Read-Only Reader Part Numbers and Options
- 37 iCLASS OSDP Reader Part Numbers and Options
- 38 iCLASS Hi-O Enabled Reader Part Numbers and Options
- 39 iCLASS Read/Write Reader Part Numbers and Options
- 40 bioCLASS Reader/Enroller, Read-Only and Read/Write Biometric Reader Part Numbers and Options
- 41 iCLASS US Government FIPS201 Compliant Read-Only Reader Part Numbers and Options
- 42 multiCLASS US Government FIPS201 Compliant with HID or Indala Prox Read-Only Reader Part Numbers and Options
- 43 multiCLASS US Government FIPS 201 Compliant with Magstripe Read-Only Reader Part Numbers and Options
- 44 iCLASS US Government FIPS 201 Read/Write Reader Part Numbers and Options
- 45 iCLASS US Government FIPS 201 Compliant OSDP Reader Part Numbers and Options
- 46 iCLASS / multiCLASS Transit Read-Only Reader Part Numbers and Options
- 47 iCLASS High Frequency Migration Readers
- 47 MIFARE DESFire EV1 and MIFARE Classic Compliant Read-Only Part Numbers and Options
- 48 multiCLASS High Frequency Migration Readers
- 48 MIFARE DESFire EV1 and MIFARE Classic Compliant Read-Only Part Numbers and Options
- 49 iCLASS High Frequency Migration Readers - OSDP
- 49 MIFARE DESFire EV1 and MIFARE Classic Compliant OSDP Compliant Reader Part Numbers and Options
- 50 iCLASS / multiCLASS Rijkspas Compliant Read-Only and OSDP Reader Part Numbers and Options
- 51 Reader Wiegand Output Configuration Guide
- 51 iCLASS Programmer Ordering Guide
- 52 SmartID Readers
- 52 SmartID Single-Technology 13.56 MHz Readers Part Numbers and Options
- 52 SmartTRANS Multi-Technology Readers Part Numbers and Options
- 53 SmartTOOLS Card Programming Software and Devices Part Numbers and Options
- 53 SmartID Desktop Reader/Writer Part Numbers and Options
- 54 SmartID Reader Cross Reference
- 54 GEN 1 & 2
- 55 GEN 2 & FlexSmart
- 55 SmartID (GEN 2) & HID MIFARE
- 56 SmartID® MIFARE® and DESFire® Reader Custom Format Request Form
- 58 FlexSmart Readers Part Numbers and Options (Asia-Pacific Region Only)
- 58 Reader Description
- 59 Custom Format MIFARE® or DESFire® Reader Ordering Guide
- 60 Edge Readers
- 60 Edge™ Solo Part Numbers and Options
- 61 Edge™ Solo Kit Part Numbers and Options
- 63 13.56 MHz Accessories
- 65 iCLASS Programming Platform
- 65 Configured iCLASS Credentials
- 65 Encoder
- 65 Smart Card with Facility Code and Credential Credits
- 66 iCLASS Programming Platform Ordering Guide
- 67 Corporate 1000™ Format Request & Authorization Form
- 69 iCLASS Elite Program™ Request & Authorization Form