TM
AVS-18-I
Professional Full DDC Video and Audio switch w/ Serial & IR remote control
Installation Guide
Product View
AVS-18-I
440 mm ( 17.3 inch )
Front & Rear View
AVS -18 - I
VIDEO + AUDIO SWITCH
Reset
IR remote control sensor
Video Push-button selection
Audio Push-button selection
Audio
Video
DEVICE
9V i n
DC / AC
Power input
DC / AC 9V 500 mA
Video switches are designed for effectively saving energy.
Sync. On / Off selection
Sync. indicator
Sy nc .
Audio devices connections for speaker and mic
Serial port for firmware upgrade
VGA connection for LCD or CRT monitor
Video and Audio ports for connecting systems
44 mm
( 1.73 inch )
1
Connect Cables
2 3
Connect power adaptor Connect device port
1. Video
2. Speaker
3. Mic
Port Selection
Connect system port
1. Video cables
2. Audio cables
Press button to select port for control
Press button to select sync / async
Use IR remote controller for selecting port ( optional ), sync / async selection
Features & Benefits
Enables up to 8 PCs to connect to one set Video/Audio output
IR remote control : 3 meters
Compatible with Windows ( Windows 98, 2000, XP, Vista, Windows 7 ),
Linux and Mac OS
Built-in All-time Full DDC supported throughout all switch channels
Easy switching with push-button or IR remote controller
RS-232 serial control and firmware upgradable
Video / Audio sync & async selectable
Displays the output for computers on a single monitor
Max video resolution supported 1920 x 1440
DDC; DDC2; DDC2B Support
VGA, SVGA, SXGA, XGA, UXGA, WUXGA and Multisync Monitors or equivilent multimedia projector
Easy installation, no software required
RS-232 Command ( Example for Windows only )
1. From Windows
Start Program Accessories Communication
Click on "Start", choose "Program", choose "Accessories", select "Communication", then click on "Hyper Terminal"
Hyper Terminal
2. Set up Windows hyper terminal
1). In hyper terminal
a).create a "new connection"
b). Type in a name for the connection ( for example, AVS-18-I ), click "OK"
2). Under "connect using" select "Direct to Com N ( N:1, 2, 3... )", click "OK"
3). Com 1 setup
a). Set "Bits per second" to 9600
b). Set "Data Bits" to 8
c). Set "parity check bit" to "None"
d). Set "Stop Bits" to 1
e). Set "Flow control" to "None"
Then Click OK - the hyper terminal screen should appear
4). Click "File", select "Properties" from the menu bar
5). Click on "settings", use default:
a). "Windows key"
b). "Ctrl + H(C)"
c). Auto detect and back scroll 500 lines
6). Go to "ASCII setup" and select the following items
a). Sending - check: "send line ends with line feed" and "echo typed
characters locally" box
b). Receiving - check: "wrap long lines"
3. After the above actions
1). Plug or replug the RS232 cable and the control window will pop up immediately
2). Now you see "AVS Link", version such as "AVS-18-I F/W:V 1.1" and
status such as "s1v1", "s1a1"
3). You are ready to do all commands now !!
4. Serial port command sync : audio / video synchronized command async : audio / video asynchronous command s1v0 : show all status s1a0 : show all status s1v1 : select video port 1 s1a1 : select audio port 1 s1v2 : select video port 2 s1a2 : select audio port 2 s1v8 : select video port 8 s1a8 : select audio port 8
Ordering Information
Model Description
AVS-18-I 8-port Video and Audio Switch with Serial IR remote control
Optional part / accessory
Cables
CMV-201-03
CMV-201-06
CAS-202-03
CAS-202-06
Power Adaptor
3-ft Male-to-Female video cable
6-ft Male-to-Female video cable
3-ft Stereo Audio cable
6-ft Stereo Audio cable
JM-4347-G
AD-0950-25
Power supply AC 9V ( 500 mA ) - 110V
Power supply DC 9V ( 500 mA ) - 110V
* Any other interface is available upon request
IR Remote Controller
RC-03 Video + Audio IR remote controller
Rack Mounting Kit
RMK-1902
RMK-19
19” rack mounting bracket set for 8 / 12 / 16-port KVM Switch
19” rack mounting cable support bar
IR Remote Control Command
1 2
5 4
7
Video
1
8
Sync.
Audio
2 3
3
6
4 5 6
7 8
/ AV IR Remote Controller
Video selection
Audio selection
Sync. On / Off selection
Customer setting
Specification
Functional
System port number
Panel button control
Button LED
Sync / Async LED
IR remote control
IR remote control distance
Hot plug-and-play
Serial control
VGA resolution
System connectors
Device connectors
Video
Audio
Video
Audio
Mechanical
Dimensions H x W x D
Weight
Environmental
Operating temp
Storage temp
Humidity
Power
Operating voltage
Power frequency
Input power
Supported
Cascade stereo audio
DDC
VGA
Certification
AVS-18-I
8
8
Selected - Green
Sync : Blue LED on ; Async : Blue LED off
Yes ( Built-in receiver, controller RC-03 optional )
3M
Yes
Yes
Max 1920 x 1440 , 400 MHz , DDC1 / DDC2B
HDB-15 Male x 8
Speaker x 8 , Mic x 8 (3.5mm)
HDB-15 Female x 1
Speaker x 1 , Mic x 1 (3.5mm)
44 x 440 x 148 mm
( 1.73 x 17.3 x 5.82 inch )
1740 g ( 3.84 lb )
0 to 60 °C ( 32 to 140 °F )
-30 to 70 °C ( -22 to 158 °F )
0~80% RH, NC
DC / AC 9V ( 5 00 mA )
50-60 Hz
AC 100-120 or 220-240V
3 Layers
Yes
DDC , DDC2 , DDC2B
VGA , SVGA , XGA , SXGA , UXGA , QXGA
FCC, CE
Limited Warranty For ConnectPRO Video / Audio Solution Product
ConnectPRO offers 1-year limited warranty for all of its Video / Audio Solution products.
ConnectPRO stands behind its products assured that you're purchasing a proven technology with quality and reliability.
ConnectPRO - USA, Taiwan www.connectpro.com
Corporate Office
20525 Paseo Del Prado Walnut, CA 91789, USA
Tel +1-909-444-9288 Fax +1-909-444-9289
Design Center and Operational Hubs
13F., No.120, Sec. 1, Sanmin Rd., Banciao Dist.,
New Taipei City 220, Taiwan, R.O.C.
Tel +886-2-8964-2700 Fax +886-2-8964-2977
TM
IG-AVS18I_V1
