LG E2342V Owner's manual Owner’s Manual

OWNER’S MANUAL

LED LCD MONITOR

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

E2242V

E2342V

E2442V

E2742V www.lg.com

2 TABLE OF CONTENTS

CONTENTS

3

ASSEMBLING AND PREPAR-

ING

7

9

6

7

3 Unpacking

4 Parts and buttons

5 Setting up the Monitor set

5 - Attaching the Stand Base

- Detaching the Stand Base

- Mounting on a table

- Using the cable holder

- Mounting on a wall

10

USING THE MONITOR SET

10 Connecting to a PC

10 - D-SUB connection

10 - DVI-D connection

10 - HDMI connection

12

CUSTOMIZING SETTINGS

13 Customizing Settings

13 - Menu Settings

14 - PICTURE

15 - COLOR

16 - DISPLAY

16 - VOLUME

17 - OTHERS

18 SUPER ENERGY SAVING Setting

19 PICTURE MODE Setting

20

TROUBLESHOOTING

22

SPECIFICATIONS

22 E2242V

23 E2342V

24 E2442V

25 E2742V

26 Preset Modes (Resolution)

26 Indicator

27

PROPER POSTURE

27 Proper posture for using the Monitor set.

ASSEMBLING AND PREPARING 3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

CD(Owner's Manual) /

Card

D-SUB Cable

DVI-D Cable

(This cable is not included in all countries.)

Power Cord AC-DC Adapter

( Depending on the country ) or

AC-DC Adapter

( Depending on the country )

Stand Body Stand Body Two Screws Stand Base

CAUTION y Do not use any unapproved accessories to ensure the safety and product life span.

y Any damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE y The accessories supplied with your product may vary depending on the model.

y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

4 ASSEMBLING AND PREPARING

Parts and buttons

Power Indicator y Lighting On: Turned on y Lighting Off: Turned off

(Power Button)

Button (See p.12)

Connection panel (See p.10)

Setting up the Monitor set

Attaching the Stand Base

1 Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

2 E2242V/E2342V/E2442V

1

2

3

Attach the Stand Body to the monitor set.

Attach the Stand Base.

Tighten the screw to the right with a coin.

ASSEMBLING AND PREPARING 5

E2742V

3

4

1

2

Attach the Stand Body to the monitor set.

Use two screws to fix the Stand Body and monitor set.

Attach the Stand Base.

Tighten the screw to the right with a coin.

Stand Body

Stand Body

Stand Base

Stand Body

Stand Base

6 ASSEMBLING AND PREPARING

Detaching the Stand Base

1 Place the Monitor set with the screen side down on a flat and cushioned surface.

E2742V

1

2

3

Turn the screw to the left with a coin.

Pull out the Stand Base from the Stand Body.

Remove two screws and pull out the Stand

Body from the monitor set.

2 E2242V/E2342V/E2442V

1

2

3

Pull out the Stand Body and Stand Base from the monitor set.

Turn the screw to the left with a coin.

Pull out the Stand Base.

Stand Body

Stand Base

Stand Body

Stand Base

Stand Body

Stand Base

Stand Body

CAUTION y This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

y Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

ASSEMBLING AND PREPARING 7

Mounting on a table

1 Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

3 Press (Power) button on the bottom switch panel to turn the power on.

10 cm

CAUTION

Unplug the power cord before moving the

Monitor to another location. Otherwise electric shock may occur.

10 cm

10 cm

10 cm

Using the cable holder

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

Cable holder

or

8 ASSEMBLING AND PREPARING

WARNING

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a table.

Do not touch or press the screen when adjusting the angle of the monitor.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

NOTE

The Kensington security system is optional.

You can obtain it from most electronics stores.

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

Front Rear

ASSEMBLING AND PREPARING 9

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and

Setup Guide.

Model

VESA (A x B)

Standard screw

Number of screws

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1 Please, Use the screw and wall mount interface in accordance with VESA Standards.

2 If you use screw longer than standard, the monitor might be damaged internally.

3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4 VESA compatible.

5 Please use VESA standard as below.

y 784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm y 787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad and screws.

E2242V

E2342V

75 x 75

M4

4

E2442V

E2742V

100 x 100

CAUTION y Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

y If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y Use only an authorized LG wall mount and contact the local dealer or qualified personnel.

y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. y Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE y Use the screws that are listed on the VESA standard screw specifications.

y The wall mount kit will include an installation manual and necessary parts.

y The wall mount bracket is optional. You can obtain additional accessories from your local dealer.

y The length of screws may differ depending on the wall mount. Be sure to use the proper length.

y For more information, refer to the instructions supplied with the wall mount.

10 USING THE MONITOR SET

USING THE MONITOR SET

Connecting to a PC

y Your Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the

Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

HDMI connection

Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations.

NOTE y When using a D-Sub signal input cable connector for Macintosh y Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

NOTE y If you use HDMI PC, it can cause compatibility problem.

CAUTION y Connect the signal input cable and tighten it by turning the screws clockwise.

y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

y Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

USING THE MONITOR SET 11

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the " Self Image Setting " Function is executed automatically. (Only supported in Analog Mode)

NOTE y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/

DVI-D/HDMI) respectively in Monitor set.

y If you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

y Some red, green, or blue spots may appear on the screen. This is normal.

NOTE y "Self Image Setting" Function.

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) y ‘AUTO’ Function.

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the

AUTO function button to improve resolution.

(Only supported in Analog Mode)

12 CUSTOMIZING SETTINGS

CUSTOMIZING SETTINGS

1 Press the desired button on the bottom of the Monitor set.

2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

3 Select EXIT to leave the OSD menu.

Monitor set Buttons

Button

(SUPER ENERGY SAVING)

Description

Accesses the main menus.(See p.13)

OSD LOCKED/

UNLOCKED

This function allows you to lock the current control settings, so that they cannot be inadvertently changed.

Press and hold the MENU button for several seconds.

The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD

UNLOCKED" should appear.

Use this button to enter SUPER ENERGY SAVING menu.For more information.(See p.18)

(Power Button)

Use this button to enter CUSTOM, TEXT, PHOTO, CINEMA, GAME menus.(

See p.19

)

When adjusting your display settings, always press the AUTO button on the MONITOR

SETUP OSD. (Only supported in Analog Mode)

The best display mode 1920 x 1080

You can choose the input signal.

• When two input signals are connected, you can select the input signal (D-SUB/DVI/

HDMI) you want.

• When only one signal is connected, it is automatically detected. The default setting is

D-SUB.

EXIT

Exit the OSD(On Screen Display).

Turns the power on or off.

Power Indicator The power indicator stays red if the display is running properly

(On Mode). If the display is in Sleep Mode, the power indicator blinks red.

CUSTOMIZING SETTINGS 13

Customizing Settings

Menu Settings

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Set the options by pressing the ◄ or ► or ▼ buttons.

3 Select the " NEXT MENU" button to enter the more option settings.

4 Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

MENU

BRIGHTNESS

CONTRAST

WIDE/ORIGINAL

Analog Digital HDMI

●

●

●

●

●

●

Description

To adjust the brightness, contrast of the screen

RESET

●

●

●

●

●

●

WIDE

Switch to full screen mode according to input image signal.

ORIGINAL

Change the input image signal ratio to original.

* This function works only if input resolution is lower than Monitor set ratio

(16:9).

Restore all factory default settings. Press the immediately.

◄ , ► buttons to reset

MENU > NEXT MENU

PICTURE

SHARPNESS

COLOR

DISPLAY

BLACK LEVEL

OVER SCAN

GAMMA

COLOR TEMP

HORIZONTAL

VERTICAL

CLOCK

PHASE

VOLUME

OTHERS LANGUAGE

POWER INDICATOR

WHITE BALANCE

Analog Digital HDMI

● ● ●

●

●

●

●

●

●

●

●

●

●

●

●

Description

To adjust the clearness of the screen .

To set offset level

To improve the clarity and stability of the screen

To customize the color of the screen

To adjust the position of the screen

To improve the clarity and stability of the screen

To adjust the volume

To customize the screen status for a user's operating environment y Analog: D-SUB(Analog signal) input.

y Digital: DVI-D(Digital signal) input.

y HDMI: HDMI(Digital signal) input.

14 CUSTOMIZING SETTINGS

PICTURE

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the " NEXT MENU" button to enter the more option settings.

3 Enter to PICTURE by pressing the ▼ button.

4 Set the options by pressing the ◄ or ► or ▼ buttons.

5 Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

MENU > NEXT MENU > PICTURE

SHARPNESS

BLACK LEVEL

OVER SCAN

Description

To adjust the clearness of the screen.

You can set the offset level. If you select'HIGH', the screen will be bright and if you select ‘LOW’, the screen will be dark.(only for HDMI input)

* Offset?As the criteria for video signal, it is the darkest screen the monitor can show.

To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment.

CUSTOMIZING SETTINGS 15

COLOR

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the " NEXT MENU" button to enter the more option settings.

3 Select COLOR by pressing the ► button.

4 Enter to COLOR by pressing the ▼ button.

5 Set the options by pressing the ◄ or ► or ▼ buttons.

6 Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

MENU > NEXT MENU > COLOR

GAMMA

COLOR TEMP

Description

Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images.

CUSTOM

• RED:Set your own red color levels.

• GREEN: Set your own green color levels.

• BLUE:Set your own blue color levels.

Select the screen color.

WARM: Set the screen to warm color temperature (more red).

MEDIUM: Set the screen to medium color temperature.

COOL: Set the screen to cool color temperature (more blue).

16 CUSTOMIZING SETTINGS

DISPLAY

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the " NEXT MENU" button to enter the more option settings.

3 Select DISPLAY by pressing the ► button.

4 Enter to DISPLAY by pressing the ▼ button.

5 Set the options by pressing the ◄ or ► or ▼ buttons.

6 Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

MENU > NEXT MENU > DISPLAY

HORIZONTAL

VERTICAL

CLOCK

PHASE

Description

To move image left and right.

To move image up and down.

To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.

To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

VOLUME

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the " NEXT MENU" button to enter the more option settings.

3 Select VOLUME by pressing the ► button.

4 Enter to VOLUME by pressing the ▼ button.

5 Set the options by pressing the ◄ or ► buttons.

6 Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

MENU > NEXT MENU > VOLUME

VOLUME

Description

To adjust the volume of headphone/earphone.(Only for HDMI input)

CUSTOMIZING SETTINGS 17

OTHERS

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.

2 Select the " NEXT MENU" button to enter the more option settings.

3 Select OTHERS by pressing the ► button.

4 Enter to OTHERS by pressing the ▼ button.

5 Set the options by pressing the ◄ or ► or ▼ buttons.

6 Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

Each option is explained below.

MENU > NEXT MENU > OTHERS

LANGUAGE

POWER

INDICATOR

WHITE

BALANCE

Description

To choose the language in which the control names are displayed.

Use this function to set the power indicator on the bottom side of the monitor to

ON or OFF.If you set OFF, it will go off.

If you set ON at any time, the power indicator will automatically be turned on.

If the output of the video card is different the required specifications,the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.Activate this function when white and black colors are present in the screen.

18 CUSTOMIZING SETTINGS

SUPER ENERGY SAVING Setting

1 Press ( SUPER ENERGY SAVING ) button on the bottom of the Monitor set to display the SUPER

ENERGY SAVING OSD.

2 Set the options by pressing the ◄ or ► or ▼ buttons.

3 Select EXIT to leave the OSD menu.

Each option is explained below.

SUPER ENERGY SAVING

ON

OFF

RESET

Description

Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function

Disables SUPER ENERGY SAVING.

Resets the values of total energy consumption reduction and CO2 emission reduction estimates.

NOTE y TOTAL POWER REDUCTION: How much power is saved while using the monitor.

y TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.

y SAVING DATA(W/h)

546 mm (21.5 inch) 584 mm (23 inch) 609 mm (24 inch) 685 mm (27 inch)

SUPER SAVING 6 W/h 7 W/h 7 W/h 9 W/h y Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor.

y LG calculated these values by using “broadcast video signal”

(including broadcast video: IEC 62087) y SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.

CUSTOMIZING SETTINGS 19

PICTURE MODE Setting

1 Press MODE button on the bottom of the Monitor set to display the PICTURE MODE OSD .

2 Set the options by pressing the ◄ or ► or ▼ buttons.

3 Select EXIT to leave the OSD menu.

Each option is explained below.

PICTURE MODE

CUSTOM

TEXT

PHOTO

CINEMA

GAME

Description

It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

It is a mode that the screen is adjusted to the best for the text works.

It is a mode that the screen is adjusted to the best to view pictures.

It is a mode that the screen is adjusted to the best to view the videos.

It is a mode that the screen is adjusted to the best to play a game.

PICTURE MODE

CUSTOM

VIVID 1

VIVID 2

STANDARD

CINEMA

Description

It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.

Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour, and sharpness.

Adjusts the image for the normal environment.

It is a mode that the screen is adjusted to the best to view the videos.

20 TROUBLESHOOTING

TROUBLESHOOTING

Check the following before calling for service.

No image appears

Is the power cord of the display connected?

Is the power indicator light on?

Is the power on and the power indicator Red?

Is the power indicator flickering?

y Check and see if the power cord is connected properly to the power outlet.

y Press the Power button.

y Adjust the brightness and the contrast.

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "NO SIGNAL" message on the screen? y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

y Try to turn on the PC.

y This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the

'Specifications' section of this manual and configure your display again.

y When the monitor is on "No-Signal" in 5 minutes, the monitor goes to

DPM mode.

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD

UNLOCKED” will appear.

Display image is incorrect

Display Position is incorrect.

On the screen background, vertical bars or stripes are visible.

Any horizontal noise appearing in any image or characters are not clearly portrayed.

y Press the AUTO button to automatically adjust your display image to the ideal setting.

y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Check Control Panel ► Display ► Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).

TROUBLESHOOTING 21

CAUTION y Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.

y If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

y The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

Display image is incorrect

The screen color is mono or abnormal.

The screen blinks.

y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

y Make sure the video card is properly inserted in the slot.

y Set the color setting higher than 24 bits (true color) at

► Settings.

Control Panel y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the display driver?

y Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com.

y Make sure to check if the video card supports Plug&Play function.

22 SPECIFICATIONS

SPECIFICATIONS

E2242V

Display

Sync Input

Video Input

Resolution

Plug & Play

Power Input

AC-DC Adapter

Dimensions

Depth)

Weight

Tilt Range

Environmental conditions

Stand Base

Power cord

Screen Type 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-

Glare coating

Visible diagonal size: 54.6 cm

Pixel Pitch 0.247 mm x 0.247 mm (Pixel Pitch)

Horizontal Frequency 30 kHz to 83 kHz (Automatic)

Vertical Frequency

Input Form

Signal Input

Input Form

Max

56Hz to 75Hz (D-SUB, DVI-D)

56Hz to 61Hz (HDMI)

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital)

HDMI Connector

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

DDC 2B(Analog,Digital,HDMI)

On Mode : 23 W(Typ.)

Sleep Mode ≤ 0.3 W

Off Mode ≤ 0.3 W

19 V 1.2 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1,manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V 1.3 A

With Stand

Without Stand

50.9 cm x 38.7 cm x 18.1 cm

50.9 cm x 31.3 cm x 5.5 cm

2.6 kg

-5° to 20°

Operating Temperature

Operating Humidity

10°C to 35 °C

10 % to 80 %

-20°C to 60 °C

5 % to 90 % non-Condensing

Attached ( ), Detached (O)

Wall-outlet type

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS 23

SPECIFICATIONS

E2342V

Display

Sync Input

Video Input

Resolution

Plug & Play

Power

Consumption

Power Input

AC-DC Adapter

(Width x Height x

Depth)

Weight

Tilt Range

Stand Base

Power cord

Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-

Glare coating

Visible diagonal size: 58.4 cm

Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch)

Horizontal Frequency 30 kHz to 83 kHz (Automatic)

Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)

56Hz to 61Hz (HDMI)

Input Form

Signal Input

Input Form

Max

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital)

HDMI Connector

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

DDC 2B(Analog,Digital,HDMI)

On Mode : 24 W(Typ.)

Sleep Mode ≤ 0.3 W

Off Mode ≤ 0.3 W

19 V 1.3 A

Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V 1.7 A

Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V 1.3 A

With Stand

Without Stand

54.4 cm x 40.6 cm x 18.1 cm

54.4 cm x 33.2 cm x 5.5 cm

2.9 kg

-5° to 20°

10°C to 35 °C

10 % to 80 %

-20°C to 60 °C

5 % to 90 % non-Condensing

Attached ( ), Detached (O)

Wall-outlet type

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

24 SPECIFICATIONS

SPECIFICATIONS

E2442V

Display

Sync Input

Video Input

Resolution

Plug & Play

Power

Consumption

Power Input

AC-DC Adapter

Dimensions

(Width x Height x

Depth)

Weight

Tilt Range

Environmental conditions

Screen Type 60.9 cm (24 inch) Flat Panel Active matrix-TFT LCDAnti-

Glare coating

Visible diagonal size: 60.9 cm

0.277 mm x 0.277 mm (Pixel Pitch) Pixel Pitch

Horizontal Frequency 30 kHz to 83 kHz (Automatic)

Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)

56Hz to 61Hz (HDMI)

Input Form

Signal Input

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital)

HDMI Connector

Input Form

Max

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

DDC 2B(Analog,Digital,HDMI)

On Mode : 25 W(Typ.)

Sleep Mode ≤ 0.3 W

Off Mode ≤ 0.3 W

19 V 1.6 A

Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE

OUTPUT: 19 V 1.7 A

With Stand

Without Stand

56.7 cm x 41.8 cm x 18.1 cm

56.7 cm x 34.3 cm x 5.5 cm

3.6 kg

-5° to 20°

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

10°C to 35 °C

10 % to 80 %

-20°C to 60 °C

5 % to 90 % non-Condensing

Stand Base

Power cord

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS 25

SPECIFICATIONS

E2742V

Display

Sync Input

Video Input

Resolution

Plug & Play

Power

Consumption

Power Input

AC-DC Adapter

Dimensions

(Width x Height x

Depth)

Weight

Tilt Range

Environmental conditions

Screen Type 68.5 cm (27 inch) Flat Panel Active matrix-TFT LCDAnti-

Glare coating

Visible diagonal size: 68.5 cm

0.311 mm x 0.311 mm (Pixel Pitch) Pixel Pitch

Horizontal Frequency 30 kHz to 83 kHz (Automatic)

Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D)

56Hz to 61Hz (HDMI)

Input Form

Signal Input

Separate Sync. Digital

15 pin D-SUB Connector /DVI-D Connector (Digital)

HDMI Connector

Input Form

Max

RGB Analog (0.7 Vp-p/ 75 ohm), Digital

D-SUB(Analog) : 1920 x 1080 @ 60 Hz

DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz

Recommend VESA 1920 x 1080 @ 60 Hz

DDC 2B(Analog,Digital,HDMI)

On Mode : 30 W(Typ.)

Sleep Mode ≤ 0.3 W

Off Mode ≤ 0.3 W

19 V 2.2 A

Type PA-1650-68, manufactured by LITE-ON TECHNOLOGY CORPORATION

OUTPUT: 19 V 3.42 A

With Stand

Without Stand

64.1 cm x 45.9 cm x 20.3 cm

64.1 cm x 39.3 cm x 4.7 cm

4.4 kg

-5° to 20°

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Attached ( ), Detached (O)

Wall-outlet type

10°C to 35 °C

10 % to 80 %

-20°C to 60 °C

5 % to 90 % non-Condensing

Stand Base

Power cord

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

26 SPECIFICATIONS

Preset Modes (Resolution)

E2242V, E2342V, E2442V, E2742V

720 x 400

640 x 480

640 x 480

800 x 600

800 x 600

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1680 x 1050

1920 x 1080

31.468

31.469

37.500

37.879

46.875

48.363

60.023

67.500

63.981

79.976

65.290

67.500

60

75

60

60

75

60

75

60

Vertical

Frequency(Hz)

70

60

75

75

Polarity(H/V)

+/+

+/+

-/+

+/+

+/+

-/-

+/+

+/+

-/+

-/-

-/-

+/+

Recommend Mode

HDMI TIMING

Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz)

480P

576P

720P

720P

1080i

1080i

1080P

1080P

31.50

31.25

37.50

45.00

28.12

33.75

56.25

67.50

60

50

50

60

50

60

50

60 Recommend Mode

Indicator

Mode

On Mode

Sleep Mode

Off Mode

LED Color

Red

Blinking Red

Off

PROPER POSTURE 27

PROPER POSTURE

Proper posture for using the Monitor set.

Adjust the

Monitor set and your posture to allow you to view images at the optimal viewing angle.

Adjust the location of the

Monitor set to avoid it reflecting light.

Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.

Make sure to read the Safety Precautions before using the product.

Keep the Owner’s Manual (CD) in an accessible place for future reference.

The model and serial number of the SET is located on the back and one side of the SET.

Record it below should you ever need service.

MODEL

SERIAL

ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental

Protection Agency(EPA).

As an ENERGY STAR Partner LGE

U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.