SSBC Brakes Proportioning Valve Instructions

ADJUSTABLE PROPORTIONING
VALVE INSTRUCTIONS
IN = Line from Master Cylinder
OUT = Line going to rear brakes
1. Turn valve to full increase.
2. Turn valve to full decrease, counting the number
of turns.
3. Increase the valve half to number of turns
counted in step 2.
4. This is your start point for adjustment.
5. TEST STOP VEHICLE. Continue to adjust the
valve, increase or decrease, so front and rear
brakes stop equally. (Increase will allow more
pressure to rear brakes).
(DO NOT INSTALL VALVE BETWEEN MASTER CYLINDER
AND DISTRIBUTION BLOCK WITH SWITCH).
">