PENTAX Optio 33LF Digital Compact Camera Manual

(PC Connection Manual)
Viewing Your Digital
Camera Images
On Your PC
Introduction
This booklet explains how to view the images you took with the
PENTAX Optio 33LF on your PC. Keep this manual in a safe place.
Regarding copyrights
Images taken using the Optio 33LF that are for anything other than personal
enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are even cases
where limitations are placed on taking pictures even for personal enjoyment
during demonstrations, industrial enterprise or as items for display. Images
taken with the purpose of obtaining copyrights also cannot be used outside
the scope of use of the copyright as laid out in the Copyright Act, and care
should be taken here also.
Regarding trademarks
• The SD logo
is a trademark.
• PENTAX is a trademark of PENTAX Corporation.
• Optio is a trademark of PENTAX Corporation.
• All other brands or product names are trademarks of registered trademarks
of their respective companies.
• Apple, the Apple logo, AppleScript, the Apple Store, Mac, the Mac logo,
Mac OS, Macintosh, and QuickTime are trademarks of Apple Computer,
Inc., registered in the U.S. and other countries.
• This product supports PRINT Image Matching II.
When used in combination, PRINT Image Matching II enabled digital still
cameras, printers and software help photographers to produce images
more faithful to their intentions.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
• Symbols used in this manual have the following meanings:
Gives page numbers explaining related operations.
Gives information that is useful to know.
Gives cautions and notes about the operation.
The PC screenshots in this booklet may differ from your PC, depending on
your model.
Contents
Your Digital Camera: From Image Capture to Photo Prints ...2
Viewing Digital Camera Images on a Windows PC ...............4
System Requirements ............................................................... 4
Installing the image processing software (ACDSee for
PENTAX) ..................................................................................... 6
Displaying and Copying Images on your PC........................... 8
Disconnecting the Camera from your PC .............................. 12
Viewing Digital Camera Images on a Macintosh .................14
System Requirements ............................................................. 14
Installing the image processing software (ACDSee for
PENTAX) ................................................................................... 15
Displaying and Copying Images on your Macintosh............ 16
Disconnecting the Camera from your Macintosh ................. 17
About ACDSee for PENTAX ..................................................19
Launching ACDSee for PENTAX ............................................ 19
Viewing using the Browser ...................................................20
About the Browser ................................................................... 20
Viewing images in other folders ............................................. 24
Sorting image files ................................................................... 25
Setting detailed display categories ........................................ 26
Viewing a large version of an image (Viewer) .....................27
About the Viewer...................................................................... 27
Panorama Image Stitching with ACD photostitcher ...........29
Printing an image ...................................................................32
Printing from the Browser....................................................... 32
Printing from the Viewer.......................................................... 32
Creating and Printing contact sheets .................................... 33
E-mailing your images from ACDSee for PENTAX .............34
About ACDInTouch ................................................................35
1
Your Digital Camera: From Image Capture
to Photo Prints
Here are some ways to use the images
captured with your digital camera.
Is your computer…
• equipped with a standard USB interface?
• using Windows Me / 2000 / XP as your OS?
Mac OS 9.0 or later?
View on TV
Connect your camera to a TV with
an AV cable to enjoy your pictures
on the screen.
Connect your camera
and computer with a
USB cable, and copy
the camera images.
Optio 33 LF Operating Manual
(P.82)
Have prints made
2
Is your computer…
• using Windows 95 / 98 SE / NT?
Mac OS 8.6, or earlier?
Have prints made from your
card images at a photo shop.
Transfer your images using the
built-in card slot + PC card
adaptor or a card reader.
• Set DPOF settings on your
camera, and have prints
made at your photo shop.
Optio 33 LF Operating
Manual (P.83)
• Select images to print.
• Remove the card from the
camera. When transferring
images on the card to a PC
with another device, make
sure to review the user manual
accompanying that device.
Internet
Use your e-mail software to attach images to e-mails, or
use them on your homepage.
ACDSee for PENTAX
•
•
•
•
•
•
P.19-35
View Images
Edit Images
Save processed images
E-mail Images
Manipulate images
Print images
• See the operating manual of your
email software for details on how to
make attachments to emails.
• See the operating manual of the
software you are using for details on
how to use images on your
homepage.
* These operations also can be performed using
commercially available image editing software. See
the instructions provided with the software for more
details.
Use your printer
Print images from your
computer to your printer.
Some printers can print
directly from cards.
• For details, see the
operating manual of the
printer you are using.
Images sent to the computer can be
saved onto a CD-R or other media.
3
Viewing Digital Camera Images on a
Windows PC
You can use the provided USB cable (I-USB2) or a card reader to
transfer your digital camera’s images to the PC, and you can edit and
print your images using the image viewing software. Here, the method
for viewing images with the provided software (S-SW12) is explained.
Software Provided
The following software is included in the CD-ROM (S-SW12) provided.
• Image viewing / editing software (ACDSee for PENTAX)
• QuickTime
System Requirements
USB connection
• OS:
Windows Me / 2000
Windows XP Home Edition / Professional
• USB mass storage class (USB 1.1)
• Installation of the driver is not necessary.
Application Software
1. ACDSee for PENTAX
(7 languages: Japanese, English, German, French, Spanish,
Italian, Chinese)
• OS:
Windows 98 / Me / NT (latest version) /
2000
Windows XP Home Edition / Professional
• CPU:
Pentium or higher recommended
• Memory:
64MB minimum
• Hard Disk space: 40MB minimum
• Display adapter capable of displaying a minimum of 256 colors
• Internet Explorer 4.0.2 or later
• Some formats may require viewing with QuickTime 6.0 or
later and DirectX 8.0 or later.
• To install ACDSee, Windows Installer Service Version 2.0
may be required.
4
2. QuickTime
(6 languages: Japanese, English, German, French, Spanish,
Italian)
• OS:
Windows 98 / NT / Me / 2000
Windows XP Home Edition / Professional
• CPU:
Pentium or higher recommended
• Memory:
128MB minimum
Movie Pictures
• AVI (Motion JPEG) compliant
• You may play movie pictures taken using the provided
software [ACDSee for PENTAX] (QuickTime required).
We recommend using the AC Adapter D-AC5 when connecting your
camera to your PC. Your image data could be corrupted if the
batteries in your camera run out during image transfer.
5
Installing the image processing software
(ACDSee for PENTAX)
This section describes the procedures for installing ACDSee for
PENTAX which lets you view and edit recorded images on your
computer.
When multiple accounts have been setup in Windows 2000 or
Windows XP, login by the authority of the administrator before
installing the software.
1
2
3
4
5
6
Turn your computer on.
Insert the CD-ROM (S-SW12) into your CD-ROM drive.
Double-click [My Computer] on the desktop.
Double-click the [CD-ROM drive (S-SW12)] icon.
Double-click the [Setup.exe] icon.
Click your applicable
language.
You can choose the language from
the following: English, French,
German, Spanish, Italian, Japanese
and Chinese.
7
6
Click [ACDSee™].
The Setup screen will appear.
Follow the on-screen guidance and
enter the registration information.
Reboot your PC after installation is
complete.
• Click [Install QuickTime] to first
install QuickTime 6.0 when a
message such as the one shown
on the right is displayed.
The panoramic image software [ACD photostitcher], the image
layout and printing software [FotoSlate], and the image editing
software [FotoCanvas] also are installed when you install ACDSee
for PENTAX.
7
Displaying and Copying Images on your PC
An explanation of how to display / copy images using ACDSee for
PENTAX is shown below.
1
2
Turn your computer on.
Turn your camera off and connect it to the PC with the
USB cable.
When copying or displaying images recorded on a SD Memory
Card / MultiMediaCard, please check that the card is inserted in
the camera before connecting.
When copying or displaying images recorded in the internal
memory, please check that any cards have been removed from the
camera before connecting to your PC.
3
Turn your camera on.
The Device Detector screen is displayed automatically.
If the Device Detector screen is not displayed, display / copy the
images following the steps in “When the Device Detector screen is
not displayed.” on page 9.
4
8
Confirm that [Copy images to
hard drive] and [Launch
ACDSee] are checked, and
click [Next].
5
Confirm that [My Pictures] is
selected for [Create folder in:]
and click [Next].
The image is copied to the PC, and
the ACDSee for PENTAX Browser
starts.
When the Device Detector screen is not displayed.
4
Double-click the [ACDSee for
PENTAX] icon on the desktop.
5
Double-click [My Computer].
6
Double-click [Removable
Disk] (If the SD Memory Card /
MultiMediaCard has a volume
label name, then select that
name).
9
7
Double-click the [DCIM] folder.
8
Double-click the [xxxPENTX]
folder.
(xxx is a 3-digit number.)
9
Select the image you wish to
view from the Browser.
(Browser)
Double-click the image to enlarge
(Viewer).
(Viewer)
10
10
Select the image you wish to copy from the Browser or
Viewer.
11
Select [Copy To…] from the
[Edit] menu.
The Copy Files screen is displayed.
12
Click [More>>] and select the
target folder.
13
Click [OK].
The image is copied to the PC.
11
Disconnecting the Camera from your PC
Windows 2000 / Me
1
Double-click the [Unplug or
eject hardware] icon in the task
bar recognized area.
The [Remove Hardware] screen will
appear.
2
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop Hardware Device] screen
will appear.
3
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message will appear.
4
Click [OK].
5
Turn off the camera and
disconnect the USB cable from your camera and PC.
When the camera and PC are connected and the focus status lamp
(green) on the camera is blinking, the PC is downloading image data
from the camera. Disconnecting the camera at this time may damage
the image data.
In the event that an error message is displayed in Step 4, confirm that
the focus status lamp (green) is off and then disconnect the camera.
12
Windows XP
1
Double-click the [Safely
Remove Hardware] icon in the
task bar recognized area.
2
Click [PENTAX USB DISK
Device] and click [Stop].
3
Click [PENTAX USB DISK
Device] and click [OK].
4
When a message is displayed
permitting removal, turn the
camera off and disconnect the
USB cable from your camera
and PC.
13
Viewing Digital Camera Images on a
Macintosh
You can use the provided USB cable (I-USB2) or a card reader to
transfer your digital camera’s images to the Macintosh, and you can
edit and print your images using the image viewing software. Here,
the method for viewing images with the provided software (S-SW12)
is explained.
Software Provided
The following software is included in the CD-ROM (S-SW12) provided.
• Image viewing / editing software (ACDSee for PENTAX)
System Requirements
USB connection
•
•
•
•
OS:
Mac OS 9.0 or later
USB mass storage class
USB 1.1
Installation of the driver is not necessary.
Application Software
ACDSee for PENTAX
(6 languages: Japanese, English, German, French, Spanish, Italian)
• OS:
Mac OS 8.6 or later (QuickTime 4.0 or later
or CarbonLib latest version required)
• CPU:
Power Macintosh 266MHz or higher
• Memory:
8MB minimum
• Hard Disk space: 6MB minimum
Movie Pictures
• AVI (Motion JPEG) compliant
• You may play movie pictures taken using the provided
software [ACDSee for PENTAX] (QuickTime required).
We recommend using the AC Adapter D-AC5 when connecting your
camera to your Macintosh. Your image data could be corrupted if
your batteries run out during image transfer.
14
Installing the image processing software
(ACDSee for PENTAX)
1
2
3
4
5
Turn your Macintosh on.
Insert the CD-ROM (S-SW12) in the CD-ROM drive.
Double-click the [CD-ROM (S-SW12)] icon.
Double-click the [Install ACDSee™] icon.
The [PENTAX Software Installer] screen will appear.
If the [Master Installer] icon appears, double-click the icon. The
[PENTAX Software Installer] screen will appear.
Click your applicable
language.
You can choose the language from
the following: English, French,
German, Spanish, Italian and
Japanese.
6
Click [ACDSee™].
The setup screen will appear.
Follow the on-screen guidance to
input registration information and
install the software.
When installation is complete,
reboot your Macintosh.
If the message [CarbonLib-xxxxx could not be found] is displayed
during installation, you must add the function expansion file called
[CarbonLib] to the function expansion folder in the system folder in
order to install the provided software in Mac OS 8.6 - 9.2.
This error message appears when this function expansion file is not
present or when an old version of the file is present.
The latest version of the CarbonLib is available on the Apple
website. Download the file and then install it onto Mac OS.
Apple website: http://www.Apple.com
Contact Apple for detailed information on how to use CarbonLib.
15
Displaying and Copying Images on your
Macintosh
Displaying images on your Macintosh
1
2
Turn your Macintosh on.
Turn your camera off and connect it to the Macintosh
with the USB cable.
When copying or displaying images recorded on a SD Memory
Card / MultiMediaCard, please check that the card is inserted in
the camera before connecting.
When copying or displaying images recorded in the internal
memory, please check that any cards have been removed from the
camera before connecting to your Macintosh.
3
Turn your camera on.
The camera is recognized as [untitled] ([NO_NAME] in
OS X) on the desktop. The folder name can be
changed.
4
Double-click the [ACDSee for PENTAX] folder on the
desktop.
5
Double-click the [ACDSee for PENTAX] program icon.
An image list (Browser) is displayed.
16
6
Open the camera folder.
The camera images are in the [untitled] (or volume label name if
the SD Memory Card has one) → [DCIM] → [XXXPENTX] (XXX is
a three-digit number) folder.
An image list of the camera is displayed.
7
Select the image to view from the image list.
Double-click the image you selected. A full-size image is displayed
(Viewer).
If the SD Memory Card / MultiMediaCard has a volume label, the
volume label name will be displayed instead of [untitled]. A new SD
Memory Card / MultiMediaCard unformatted may show the
manufacturer name or model number.
Copying images to your Macintosh
See your Macintosh user’s manual for how to copy or move files.
Please copy images to your Macintosh before editing them.
Disconnecting the Camera from your Macintosh
1
Drag [untitled] (or the volume label name on the SD
Memory Card / MultiMediaCard) to your trash.
2
Turn off the camera and disconnect the USB cable from
your camera and Macintosh.
17
About ACDSee for PENTAX
[ACDSee for PENTAX] is a comprehensive software package that
acquires, organizes, displays, processes, and shares digital camera
images.
You can use the Browser (
p.20) to acquire digital camera images
efficiently. You then can organize them in your favorite way and even
display them as thumbnails.
You can use the Viewer (
p.27) to view a large version of a single image.
Further, when you install [ACDSee for PENTAX] which is on the
provided CD-ROM (S-SW12) on a Windows PC, the panoramic
image software [ACD photostitcher] (
p.29), the image layout
software [FotoSlate], and the image editing software [FotoCanvas]
also are installed at the same time. Use this software to enjoy an even
higher degree of freedom in your image creation, editing and
processing.
This manual provides explanations regarding the most basic
[ACDSee for PENTAX] functions. Refer to the Help section in
[ACDSee for PENTAX] for detailed information. For information on
use with a Macintosh, also refer to the Help section.
Launching ACDSee for PENTAX
For Windows
1
Double-click the [ACDSee for PENTAX] icon on the desktop.
ACDSee for PENTAX will launch and the Browser will be displayed.
For Macintosh
1
2
Double-click the [ACDSee for PENTAX] folder on the desktop.
Double-click the [ACDSee for PENTAX] program icon.
ACDSee for PENTAX will launch and the Browser will be displayed.
To exit ACDSee for PENTAX
Select [Exit] from the [File] menu in the Browser or the Viewer.
19
Viewing using the Browser
In [ACDSee for PENTAX], you can view images using either the
Browser, which displays a list of images, or the Viewer, which
displays one image at a time.
The Browser is displayed when you launch [ACDSee for PENTAX].
About the Browser
Here, explanations are provided regarding Browser configuration as
well as names and functions within the Browser.
For Windows
c
d
i
e
h
f
g
c Menu bar
You can select and execute the various functions and settings of the
ACDSee for PENTAX by choosing the menu items from the menu
bar.
20
d Browser toolbar
Browser toolbar includes shortcut buttons for commonly used
functions and tools. These buttons open dialog boxes or display
further activity buttons.
You can customize the toolbar by turning the button labels on or off,
adding or removing buttons, and changing the size of the buttons.
e Navigation pane
Navigation pane displays a folder tree of the folders on your
computer, extra drive, or peripheral device.
Navigation pane includes the Folders, Calendar, Categories, Photo
Discs, and Albums tabs. You can select these tabs to display their
contents in the File pane, or to organize your files and folders.
f Preview pane
Preview pane displays the image selected in the File pane.
g Status bar
Status bar displays information and properties for the selected
folder, file or files.
h File pane
File pane displays the contents of a folder selected in the Navigation
pane as a list of files or as thumbnails.
You can sort your images by such criteria as file name, file extension,
file size, file date, etc.
i File list toolbar
With these shortcut buttons, you can copy, move or delete items,
select what file types or folders to display in the File pane, and sort
your images.
It also includes the path box that describes the location of the folder
of images currently displayed in the File pane.
You can customize the toolbar by turning the button labels on or off,
adding or removing buttons, and changing the size of the buttons.
When these categories are not displayed, check (
you want to display in the [View] menu.
) the categories
21
For Macintosh
c
d
e
g
f
c Menu bar
You can select and execute the various functions and settings of the
ACDSee for PENTAX by choosing the menu items from the menu
bar.
d Browser toolbar
Browser toolbar includes shortcut buttons for commonly used
functions and tools. These buttons open dialog boxes or display
further activity buttons.
e Navigation pane
Navigation pane displays a folder tree of the folders on your
computer, extra drive, or peripheral device.
f Preview pane
Preview pane displays the image selected in the File pane.
22
g File pane
File pane displays the contents of a folder selected in the Navigation
pane as a list of files or as thumbnails.
You can sort your images by such criteria as file name, file size, file
date, etc.
Changing the Browser display method
You can select any of the following 6 methods to display lists of
images in the Browser.
Select [Mode] in the [View] menu and then select a display method
from the submenu. You can choose from the following display
methods.
Thumb+Details
Display image file thumbnails and file information in a list format.
p.26)
You can change the file information that is displayed. (
Thumbnails
Display image file thumbnails.
Large Icons
Display large icons and file names.
Small Icons
Display small icons and file names.
List
Display small icons and file names in a list format.
Details
Display small icons and file information in a list format.
p.26)
You can change file information that is displayed. (
23
Viewing images in other folders
To view images stored in other folders, select a folder from the folder
tree in the Browser Navigation pane or directly specify a folder in the
path box.
Selecting a different folder in the folder tree
Folders selected from the folder tree are designated as the current
folder and images from that folder are displayed in the File pane.
To display a subfolder
is displayed next to the folder icon of folders that contain
subfolders. Click
to display the subfolders.
is displayed next to
folders when subfolders are displayed. Click
to hide the subfolders.
Use the buttons on the Browser toolbar to select a
different folder
You can view the contents of the folder one level above the current
folder by clicking
in the Browser toolbar.
You can view the contents of the folder displayed prior to the current
folder by clicking
in the Browser toolbar.
When you use
in the Browser toolbar to change the displayed
folder, click
to return to the folder displayed after the current folder.
Specifying a different folder using the Path box
Select [Path Box] from the [View] menu to display the path box in the
File pane. Directly enter in the path box the path of the folder
containing images you want to view. Images in that folder are
displayed in the File pane.
Also, click
to the right of the path box to display a dropdown list
containing a history of recently used folders. Select from the list a
folder with images you want to view. Images from that folder are
displayed in the File pane.
24
Sorting image files
You can change the order of image files displayed in the File pane.
Selecting sort categories
Select [Sort] from the [View] menu and then select a sort key
category from the submenu.
You can choose from the following categories.
Extension, Name, Size, Type, Date, Image Properties, Description
Specifying ascending / descending order
Select [Sort] from the [View] menu and then select [Forward] or
[Reverse] from the submenu.
• Clicking the right mouse button on the File pane background
(empty area where images are not displayed as thumbnails or
icons) will display the menu in the location of the cursor. You can
use the same step to rearrange the menus.
• For Macintosh, you can choose from the following categories: File
Name, File Size, Image Type, Date and Reverse Sort Order.
Sorting using the keyboard
You also can sort image files and specify ascending / descending
order using the numeric keypad on the keyboard.
0:Extension
1:Name
2:Size
3:Type
4:Date
5:Image Properties
6:Description
+:Forward
-:Reverse
Enable Num Lock by pressing the Num Lock key on the keyboard
when you want to sort using the numeric keypad.
25
Setting detailed display categories
You can specify items displayed in the list as well as change the
category order when the File pane is set to Details display.
Settings display categories
Select [Columns] from the [View] menu and then select a display
category from the submenu.
You can choose from the following categories.
Size, Type, Date, Image Properties, Description
Select another categories to remove checks when you do not want
to display details.
Clicking the right mouse button on the file list row header (portion
where name, size, and other categories are written) will display the
menu. You can use the same step to set the display categories.
Adjusting the width of display category rows
You can adjust row width to match the amount of text displayed in
the list. Align the cursor with the edge of the row header. Click on the
edge when the cursor changes to a left-right arrow head and drag the
edge to adjust the row width.
Double-clicking the left mouse button on the row header separator
will automatically adjust the row width to match the length of the list
text.
26
Viewing a large version of an image
(Viewer)
Double-click on a single image file selected in the Browser to display
a full-screen view of that image. When the file is a movie, the movie
will replay.
About the Viewer
Here, explanations are provided regarding Viewer configuration as
well as names and functions within the Viewer.
c
d
f
e
c Menu bar
You can select and execute the various functions and settings of the
ACDSee for PENTAX by choosing the menu items from the menu
bar.
27
d Viewer toolbar
Viewer toolbar includes shortcut buttons for commonly used
functions and tools such as the Zoom tools.
You can customize the toolbar by turning the button labels on or off,
adding or removing buttons, and changing the size of the buttons.
e Status bar
Status bar displays information and properties for the selected
folder, file or files.
f Viewer pane
Viewer pane displays your images one at a time in full resolution.
When the viewer is displayed, you can close the viewer and switch
to the browser by performing any of the following.
• Click the
(close) button.
• Double-click on the viewer pane border.
• Press the [Esc] key on the keyboard.
28
Panorama Image Stitching with ACD
photostitcher
With ACD photostitcher installed on a Windows PC, you can
panorama stitch the images you took in Panorama Assist mode.
The folder and image names displayed on the explanatory
screenshots will differ according to the setup of your PC.
When multiple accounts have been setup in Windows 2000 or
Windows XP, login by the authority of the administrator before using
ACD photostitcher.
1
Run ACDSee for PENTAX.
An image list is displayed.
2
Select the images for panorama stitching from the
image list.
Press the [Ctrl] key on the keyboard while clicking on pictures to
select multiple images.
After selecting the images, select [Extras] from the [Activities]
menu, and select [ACD photostitcher] from the submenu.
The [ACD photostitcher] is not enabled if two or more images are
not selected. The images must be the same size.
Select images
• A Windows PC is necessary for panorama stitching. (ACD
photostitcher is not compatible with Macintosh.)
• Panorama stitching cannot be performed on images of varying
save sizes.
29
3
Correct the image positioning.
[ACD photostitcher] starts, and the selected images are displayed
in panorama format.
Move the mouse pointer onto the image. It changes into a e symbol.
Hold down the left mouse button and drag the images to adjust the
stitching position.
When the position is adjusted, click the [STITCH] button.
2 Click the
[STITCH] button.
1 Click and drag to
adjust position
4
Select the stitching method.
You can choose the stitching method from [Big Plane] and [Cylinder].
Here, you will create a flat panorama. Click the [Big Plane] button.
A confirmation message is displayed. Click [OK].
Click [Big Plane].
• Click [OK] and continue if a screen like
the one shown left is displayed.
30
5
Trim the image.
Move the mouse pointer onto an image. It changes into a symbol.
Hold down the left mouse button and drag the dotted lines to adjust
the image trimming position.
When the position is adjusted, click the [Trimming] button.
2 Click the [Trimming]
button.
1 Trim the image.
6
Save the image.
After confirming your trimming, click the [Save] button to save the
image. To cancel the trimming, click the [Cancel Trimming] button.
When you are done, close ACD photostitcher and ACDSee for
PENTAX.
Click the [Save] button.
[Cancel Trimming] button
31
Printing an image
You can print image files from the Browser or the Viewer.
Printing from the Browser
You can print one or more images from the Browser.
1
Select one or more images.
To print several images, press the [Ctrl] key on the keyboard while
clicking on pictures to select multiple images for printing.
2
Select [Print Images] from the [File] menu.
The Print dialog box is displayed.
3
4
Select or change the printing options.
Click [Print].
Printing from the Viewer
You can print the currently viewed image, or all images that reside in
the same folder as the currently viewed image.
1
Select [Print Image] from the [File] menu to print the
currently viewed image.
or
Select [Print All Images] to print all images in the same
folder.
The Print dialog box is displayed.
2
3
32
Select or change the printing options.
Click [Print].
To insert date and print image
You can insert the date into an image file
and print it. Date insertion settings are
done in the Print dialog box.
1
Select the [Caption] tab in the
Print dialog box.
2
Check the [Print image original
date] check box.
Creating and Printing contact sheets
You can create and print contact sheets of your images. You can add
captions to each image, page headers and footers, and control
thumbnail size.
1
In the Browser, select a group of images.
Press the [Ctrl] key on the keyboard while clicking on pictures to
select multiple images for printing.
2
Select [Print Contact Sheet] from the [File] menu.
The Print Contact Sheet dialog box is displayed.
3
4
Select or change the printing options.
Click [OK].
For more information about creating and printing contact sheets,
click the Help button in the Print Contact Sheet dialog box.
33
E-mailing your images from ACDSee for
PENTAX
You can send images directly from the ACDSee for PENTAX without
using an external e-mail application. (E-mail account setup is
required. See the ACDSee for PENTAX Help section for details.)
Image files are converted to JPEG format then attached to an e-mail
and sent. Images are compressed before transmission when the file
size is large but no changes are made to the original image.
E-mail function is not compatible with Macintosh.
1
In the Browser, select an
image or a group of images.
To select several images, press the
[Ctrl] key on the keyboard while
clicking on pictures to select multiple
images.
2
Select [Share] from the
[Activities] menu, then select
[E-mail].
The Send E-mail dialog box is displayed.
3
4
Input the required information.
Click [Send].
For more information about e-mailing your images, click the Help
button in the Send E-mail dialog box.
An error message may be displayed and you may not be able to
send mail if your mail server security is set to a high level.
34
About ACDInTouch
ACDInTouch uses the Internet to display the latest information about
ACDSee™. You can access information related to special offers,
free digital imaging resources, newsletters, subscriptions and more.
To connect to ACDInTouch
1
Select [ACDInTouch] from the [Help] menu.
The Connect to ACDInTouch dialog box is displayed.
2
Click [Connect Now].
About the ACDInTouch services
ACDInTouch is a data exchange service. When you connect,
information is sent to you so that you can read up-to-date information
directly in the ACDInTouch pane. This information is relevant to your
product, such as upgrades, add-ons and related software from ACD
Systems that may also be of interest to you.
For information on ACD Systems’ Privacy Policy, visit Web site at:
www.ACDSYSTEMS.com/english/company/privacy.htm
35
PENTAX Corporation
2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/)
PENTAX Europe GmbH (European Headquarters)
Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX France S.A.S.
12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex,
FRANCE
PENTAX Benelux B.V.
(for Netherlands)
Spinveld 25, 4815 HR Breda, NETHERLANDS
(http://www.pentax.nl)
(for Belgium & Luxembourg)
Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
(http://www.pentax.be)
PENTAX (Schweiz) AG
Widenholzstrasse 1 Postfach 367 8305 Dietlikon,
SWITZERLAND (http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX U.S.A., Inc
600 12th Street, Suite 300
Golden, Colorado 80401, U.S.A.
(http://www.pentax.com)
PENTAX Canada Inc.
3131 Universal Drive, Mississauga, Ontario L4X 2E5,
CANADA
(http://www.pentaxcanada.ca)
• Printed on recycled paper
• Specifications and external dimensions are subject to change without notice.
57285
Copyright © PENTAX Corporation 2003
01-200310 Printed in Japan
">