SK51102 ver. A0

User’s Manual

CHENBRO

User’s Manual

SK51102

1-to-1 2.5” SATA HDD

Storage Kit

Version A0

December / 10 / 2008

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

1

SK51102 ver. A0

User’s Manual

Copyright

Copyright © 2006 CHENBRO Micom Co., Ltd.. All rights reserved.

Unless otherwise indicated, all materials in this manual are copyrighted by CHENBRO Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or otherwise, for reasons other than internal use, is strictly prohibited without prior written permission.

CHENBRO Micom Co., Ltd. reserves the right to make improvement and modification to the products indicated in this manual at any time. Specifications are therefore subject to change without prior notice.

Information provided in this manual is intended to be accurate and reliable. However, CHENBRO Micom Co., Ltd., assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from its use.

Technical Support

CHENBRO works hard to offer our customers maximum performance from our chassis. But in case you have any problem with our product you can find supports from the following resources.

Web Support

Detail information of our products is in our website. You can find technical updates, installation guides, FAQs, technical specifications and more. Our web address is: www.chenbro.com

.

Email Support

You can also fill out the technical support form at our Technical Support page. You technical issue inquiries will be sent directly to our support professionals.

Phone Support

You can also contact CHENBRO HQ or branch office for immediate support; their contact Information is as following:

CHENBRO CHENBRO Europe B.V. CHENBRO Micom (USA) Inc.

Tel: 886-2-8226-5500 Tel: 31-40-295-2045 Tel: 1-909-947-3200

Fax: 886-2-8226-5423 Fax: 31-40-295-2044 Fax : 1-909-947-4300

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

2

SK51102 ver. A0

User’s Manual

Contents

Copyright......................................................................................................................................................2

Technical Support......................................................................................................................................2

Contents .......................................................................................................................................................3

Revision History .........................................................................................................................................4

Safety Information .....................................................................................................................................5

Conventions Used in this Manual..........................................................................................................5

Getting Start with the SK51102 Storage Kit ........................................................................................6

Unpacking and Checking the Contents .......................................................................................6

Technical Specifications ..........................................................................................................................6

Compatible CHENBRO Chassis .............................................................................................................6

Introduction .................................................................................................................................................7

Functional Specification ..........................................................................................................................7

General..................................................................................................................................................7

Host / Drive / Power Backplane Interface ....................................................................................7

Mechanical Dimension .............................................................................................................................8

Components Description .........................................................................................................................9

Front View ............................................................................................................................................9

Rear View .............................................................................................................................................9

Connector & Switch Definition .............................................................................................................10

HDD Failure Signal Connector .....................................................................................................10

Setting for HDD Failure Signal Cable Connection (SK51102) ..................................... 10

Setting for HDD Failure Signal Cable Connection (RAID Card) ................................. 10

Installation Procedures ..........................................................................................................................11

Hot-swap HDD Assembly...............................................................................................................11

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

3

SK51102 ver. A0

User’s Manual

Revision History

Date Modifications

Dec. / 10 / 2008 z First Release

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

4

SK51102 ver. A0

User’s Manual

Safety Information

z Read the installation instructions before connecting SK51102 to the power source. z Only trained and qualified personnel should be allowed to install, replace or service this equipment. z Never install this product in a wet environment. z Position system cables and power cables carefully; route system cable and the power cable and plug so that they cannot be stepped on or tripped over. Be sure that nothing rests on your system components’ cables or power cable.

Conventions Used in this Manual

The following conventions are used in this manual.

Important Icon:

Provides important information on the current topic that must not be overlooked.

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

5

SK51102 ver. A0

User’s Manual

Getting Start with the SK51102 Storage Kit

Thank you for purchasing SK51102! This section covers unpacking and identifying components.

Unpacking and Checking the Contents

The complete SK51102 package includes the following items:

Item Description Quantity Picture

SK51102 storage cage 1

Hot-swap 2.5” Hard Disk Drive (HDD) tray 1

SATA cable, 700mm 1

HDD failure signal cable, 2P to 2P, 600mm 1

Screw: M3 (4mm) for HDD assembling 4

Screw: M2 (3mm) for SK51102 and chassis assembling 4

Technical Specifications

Occupancy

Capacity

Dimension (WxHxD)

1 x Slim ODD Drive Bay

1 x 2.5” SATA Hot-swap HDD

128 x 12.7 x 129.4 (mm)

5 x 0.5 x 5.1 (inch)

Compatible CHENBRO Chassis

z RM11704B / RM12404B / RM12500 / RM12800 / RM13106 / RM13204 /

RM21508B / RM21706 / RM21804 / RM31212B / RM31408 / RM31616

RM41416B / RM41500 / RM42200 / RM51224B / RM51424 / RM51924B z PC719 / PC781

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

6

SK51102 ver. A0

User’s Manual

Introduction

The CHENBRO SK51102 can house one Hot-swap 2.5” SATA HDD in one slim ODD bay converter. The ability for conversion allows existing server or PC to perform with one Hot-swap HDD and keep the flexibility.

In all, SK51102 is the best solution as value added feature and performance.

Functional Specification

General

z Support up to SATA-II (3.0 Gb/s) z Compatible with 2.5” SATA HDD (9.5 mm height) z Support inrush current control for HDD Hot-swapping z LED indicate activity and failure

Host / Drive / Power Backplane Interface

z 1 to 1 connection for 2.5” SATA HDD z 1x SATA / SAS Signal + Power (7+15 pin) connector at HDD side of backplane z 1 x SATA / SAS interface (7 pin) z 1 x DC power connectors (4-pin FDD power connector)

SK51102 supports 9.5 mm high 2.5” HDD only

The HDD activity LDE is available for SATA-II HDDs.

If SATA-I HDD applied, the HDD activity LED will not work.

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

7

SK51102 ver. A0

User’s Manual

Mechanical Dimension

Units: mm

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

8

SK51102 ver. A0

User’s Manual

Components Description

Front View

2

3

1

Device

1 2.5” HDD Hot-swap Tray

3 HDD activity / failure LED

Rear View

Function

Refer to Page 11

Blue LED On - HDD Power On

Green LED On - HDD active

Red LED On - HDD failure

2

Device

1 SATA Connector

2 HDD failure signal connector

3 HDD Access signal connector

4 Power Connector

3 4 1

Function

Connect to motherboard / RAID card

Refer to Page 10

Reserved for HDD Access signal

Power input

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

9

SK51102 ver. A0

User’s Manual

Connector & Switch Definition

HDD Failure Signal Connector

This connector is for the SAS / SATA RAID card with HDD failure signal support such as LSI MegaRAID

8308ELP. Connect the 2-pin cable on SK51102 backplane and RAID card to activate the HDD failure LED.

Setting for HDD Failure Signal Cable Connection (SK51102)

HDD Failure Signal Cable:

26H115311-001

Setting for HDD Failure Signal Cable Connection (RAID Card)

Connect the yellow wire of the cable to the CATHODE of the HDD failure connector on RAID card.

Refer to your RAID card’s user manual for the detailed pin definition.

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

10

SK51102 ver. A0

User’s Manual

Installation Procedures

The following is the installation procedures of HDD assembly.

Hot-swap HDD Assembly

a. Push the blue latch of HDD tray b. Pull it out from the cage c. Remove the supporter

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

11

SK51102 ver. A0

User’s Manual d. Attach HDD with four screws per tray e. Insert HDD tray to the cage

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

12