LEM #22–1 HP Use And Maintenance Instructions

LEM #22–1 HP Use And Maintenance Instructions

The LEM #32–1.5 HP meat grinder is a powerful and versatile kitchen appliance designed to make quick and easy work of grinding meat. With its durable construction and 1.5 horsepower motor, it can handle even the toughest grinding jobs. The grinder comes with a coarse and fine grinding plate, allowing you to choose the texture of your ground meat. It also features a meat pan for easy collecting of ground meat and a meat stomper to help you feed meat into the grinder safely.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
LEM #22–1 HP Use And Maintenance Instructions | Manualzz

IMPORTANT WARRANTY INFORMATION PLEASE READ

FILL OUT AND RETURN ENCLOSED WARRANTY CARD

THIS WARRANTY COVERS THE LEM PRODUCTS

#5–.25 HP, #8–.35 HP, #12–.75 HP, #22–1 HP, #32–1.5 HP MEAT GRINDERS.

THE WARRANTY IS EXTENDED TO THE ORIGINAL PURCHASER ONLY.

WARRANTY DURATION: This product is warranted to the original purchaser for a period of two

(2) years from the original purchase date. EACH UNIT COMES WITH A WARRANTY CARD, WHICH

MUST BE FILLED OUT COMPLETELY AND RETURNED IMMEDIATELY, WITH A COPY OF THE

PURCHASING RECEIPT. FAILURE TO RETURN YOUR WARRANTY CARD WILL LIMIT WARRANTY

TO 90 DAYS WITH PROOF OF PURCHASE.

WARRANTY COVERAGE: This product is warranted against defective materials or workmanship.

The warranty is void if the product has been damaged by accident, misuse, neglect, modification or improper service or repairs by unauthorized personnel.

It is also void if damaged in shipment or by other causes not arising out of defects in the materials or workmanship. This warranty does not extend to any units which have been in violation of written instructions furnished, or to units which have been altered or modified.

WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied, and no representative or person is authorized to assume any other liability in connection with the sale of our products. There shall be no claims for defects or failure of performance under any theory of sort, contract or commercial law including, but not limited to negligence, gross negligence, strict liability or breach of contract.

The manufacturer declines all responsibility for damage to persons, things or animals arising from the failure to comply with the norms contained in this manual. The manufacturer reserves the right to make modifications at anytime to the models while maintaining the main characteristics described herein. The manufacturer also declines all responsibility for any errors in compiling this manual.

WARRANTY PERFORMANCE: During the above two year warranty period, a product with a defect will either be repaired or replaced after the product has been inspected by an LEM Service

Technician. NO PRODUCT WILL BE EVALUATED UNLESS THE ORIGINAL SALES RECEIPT OR THE

WARRANTY CARD IS ON FILE. The repaired product will be in warranty for the balance of the two year warranty period. No charge will be made for such repair or replacement.

IMPORTANT NOTICE: If any parts are missing or defective, please contact our Customer Service

Department for assistance at 877-536-7763. (M-F 8:30am to 4:30pm EST) DO NOT RETURN TO

THE STORE WHERE THE GRINDER WAS PURCHASED.

LEM PRODUCTS MERCHANDISE RETURN POLICY WARRANTY SERVICE:

To obtain service under terms of this warranty, please contact us at 877-536-7763 to obtain authorization prior to returning the merchandise. No merchandise will be accepted without prior authorization. Please return the product pre-paid in the original packaging if possible, enclose a copy of your receipt, (Keep a copy of your proof-of purchase for your records.) and include a written explanation of the issue. Ship to LEM Products, 107 May Drive, Harrison, OH 45030,

LEM Products is not responsible for damage incurred in shipping, make certain to pack product properly. Return shipping charges are the responsibility of the purchaser. Packages returned to

LEM should be insured for the value of the product to cover any damages that may occur during shipping.

IIN ST UC TIIO S F R

L EM EC TR C M EA

G RIIN ER OD L::

# 5 -- ..2

5 H P

# 8 -- ..3

5 H P

# 12 5 H

# 22

# 32

1 H P

LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 877-536-7763 • www.lemproducts.com

PLEASE READ BEFORE OPERATING EQUIPMENT

LEM Products • 109 May Drive, Harrison, OH 45030

877-536-7763 • www.lemproducts.com

2

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using the appliance.

2. Place unit on a firm level surface.

3. To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet.

4. To protect surfaces from damage, lift, do not push or pull unit.

5. Use extreme caution when operating grinder in the presence of children.

KEEP OUT OF REACH OF CHILDREN .

6. Always unplug unit when not in use, when changing parts or cleaning.

7. When unplugging, be sure to pull by the plug and not the cord.

8. To disconnect unit, turn switch to OFF position, then remove plug from outlet.

9. Never use fingers to push meat into grinder head. Always use the meat stomper provided.

10. Thoroughly clean the unit and all parts after each use with hot soapy water.

ALWAYS KEEP WATER AWAY FROM ELECTRICAL MOTOR .

11. Use appliances only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause a malfunction or injury and void warranty. The use of attachments not recommended or sold by LEM Products may cause hazards and will void warranty.

12. To avoid the risk of fire, do not use extension cords. If an extension cord must be used temporarily, be certain that it is a #12 wire.

13. Do not attempt to repair or adjust any electrical or mechanical functions on this unit without contacting an LEM repair technician Toll Free at 877-536-7763 . Doing so will void warranty. Servicing should be performed as directed by qualified personnel only.

14. Discontinue use if plug or outlet is hot. It is recommended that the outlet be replaced if plug or outlet is hot to the touch.

FOR SAFETY, DISCONNECT GRINDER WHEN NOT IN USE:

Do not operate unit without meat. Do not overload unit when grinding. When grinder is turned off, cooling fan will no longer operate. Do not touch housing during cool down period. Housing will take a few minutes to cool down after unit is turned off. Store unit in a cool dry area.

CIRCUIT BREAKER INFORMATION:

Your LEM grinder is equipped with a circuit breaker to protect the unit. In the event of a power disruption, abnormal operation or over heating, the motor will temporarily shut down to prevent damage. If this should happen, follow the seven steps listed below.

Step 1: Turn On/Off switch to off.

Step 2: Unplug unit.

Step 3: Check inside of grinding unit and remove any obstruction.

Step 4: Wait 1 or 2 minutes, then plug unit into wall outlet again.

Step 5: Push Restart Button and release. (Located on back panel of grinder.)

Step 6: Turn switch on.

Step 7: Resume Operation.

TROUBLE SHOOTING:

If your unit fails to operate, contact LEM Products technical assistance Toll Free at 877-536-7763. If meat is mashing instead of extruding in strings from the grinding plate, chill the meat to 40°, and check to see that the plate and blade are properly installed. For an overheated plug or grinder housing discontinue use and contact technical assistance Toll Free at 877-536-7763

This product is equipped with a polarized AC (Alternating Current) plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. (If the plug does not fit fully into the outlet, reverse the plug, if it still does not fit, contact a qualified individual to install the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.

LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 877-536-7763 • www.lemproducts.com

ASSEMBLY: (See Diagram, Page 4 & 5)

1. BEFORE USING: Wash all parts of the head in hot soapy water. This will remove any grease residue and dirt left from the manufacturing process. DO NOT PUT PARTS IN DISHWASHER.

2. Remove retaining ring (#1), grinding plate (#5), knife (#8), and auger (#9) from the grinder head

(#12). Be sure that the star bolt (#15) on the side of the motor coupler is backed all the way out.

Insert the grinder head into the motor coupler so that the auger fits properly into the main gear (#21).

The head should be positioned centered and upright so that the locking screw can be firmly tightened to hold the head in place during operation. Tighten the locking screw against head.

3. Insert auger (#9) into grinder head and turn until the auger slips into the shaft of the motor.

4. Place the knife (#8) on the square auger stud (#11) of the auger (#9) with blades facing out.

5. Place grinding plate (#5) on auger stud in front of knife. Make sure notch in plate is on locating stud in head. Cutting edge of knife should be facing and flush against the grinding plate.

6. Screw retaining ring (#1) onto head until tight. Hand-tighten, do not over-tighten.

Over-tightening will cause undo wear on the knife and plate of the grinder. If ring is not tight enough, meat may mash instead of being cut by the knife. A dull knife or plate will also cause mashing of the meat. If mashing occurs, disassemble the grinder, remove all meat from grinder and plate, reassemble grinder and tighten ring tighter than it was previously before beginning to grind meat again.

7. Insert meat pan (#14) into grinder head securely.

OPERATING INSTRUCTIONS

GRINDING: When making burger from wild game, add a minimum of 10% pork fat to the meat.

This will give the burger moisture, but still not make it fatty. If pork fat is not available, use beef fat.

Never use beef suet. Suet is too hard and the burger will be cooked before the suet melts causing suet particles to remain in the burger.

Cut meat into small pieces that will easily fit into the throat of the grinder head. Meat should be 40° or colder and free of gristle and sinew. Feed meat slowly into the throat of the head. Use the meat stomper to push meat into the throat of the head. Do not force meat. NEVER USE FINGERS

TO PUSH MEAT INTO THE HEAD. Grind meat through the coarse plate first, turn motor off and unplug the grinder. Then, remove the coarse plate and clean the head of sinew, fat or gristle that has accumulated during the first grind. Assemble the unit with the fine plate, plug grinder in and regrind the meat. If meat mashes instead of coming through the plate in “strings”, see #6 under assembly section in this manual.

STUFFING SAUSAGE CASINGS: When making sausage, use at least 20% fat with your meat and grind it like burger. Mix the seasoning with the meat after the first grind and grind a second time.

For a coarser grind, grind the meat through the 3/16” plate once, then mix the seasoning with the meat. Unplug the grinder, remove the grinder knife and plate. Install the stuffing plate (#7) in place of the knife and plate. Put stuffing tube (#2, 3, or 4) in front of stuffing plate and secure with the retaining ring. Slide casings onto stuffing tube making sure to leave the end of the tube open. Turn grinder on and feed meat into the head until meat is at the end of the stuffing tube. Stop grinder and pull casing out past the opening of stuffing tube about 1”. Tie a knot in the casing. Restart grinder. This procedure will keep the casing from filling up with air when you first start stuffing.

Continue to feed meat into head until the casing is filled.

CLEANING: Unplug grinder and disassemble the grinder head. Wash all parts in hot, soapy water and thoroughly rinse in hot water. Allow parts to dry completely. Spray parts with food-grade silicone (Available at LEM Products.) to prevent rust and keep your grinder in like new condition.

LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 877-536-7763 • www.lemproducts.com

3

PARTS LIST FOR MOTOR

& GRINDER HEAD

4

4

5

6

Ref.

Description

1 Retaining Ring

2 Stuffing Tube 10MM

3 Stuffing Tube 20MM

Stuffing Tube 30MM

10MM Plate

4.5MM Plate

7

8

Stuffing Plate

Knife

9 Auger

10 Washer

11 Auger Stud

12 Grinder Head

13 Stomper

14 Meat Pan

15 Star Bolt

16 Allen Screws for Front Panel

17 Front Panel

18 Grease Seal

19 Roller Bearing

20 Main Washer

21 Main Gear

22 Bearing 608

23 Rubber Pad

24 Screw

25 S/S Upper Housing

26 Handle Screw

27 Handle

28 Back Panel

29 Circuit Breaker

30 Fastener for the Power Cord

31 Power Cord

32 Brace

33 Allen Screw M6 for Brace

10

1

2

1

1

1

1

1

1

2

#32-4

3

1

1

1

1

1

1

4

1

1

1

1

1

1

1

1

1

1

1

1

Qty

1

1

1

34

42

43

44

S/S Lower Housing

35 Switch

36 Plastic Feet

37 Allen Screw M4

38 Phillips Screw M4 for Feet

39 Step Gears

40 Clip Spring

41 Pinion Gear

Front Panel of Motor

Electric Box

Motor

LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 877-536-7763 • www.lemproducts.com

1

1

6

5

1

1

4

1

1

1

1

GRINDER SPECIFICATIONS FOR

#5–.25 HP, #8–.35 HP, #12–.75 HP, #22–1 HP, #32–1.5 HP

Gridner Size

#5 - .25 HP

#8 - .35 HP

#12 - .75 HP

#22 - 1 HP

#32 - 1.5 HP

Unit Weight

32 lbs.

36 lbs.

46 lbs.

61 lbs.

74 lbs.

Hourly Production

160 lbs.

240 lbs.

360 lbs.

550 lbs.

720 lbs.

Watts

180

250

550

750

1100

Volts

110

110

110

110

110

For Grinder Replacement Plates, Knives and Stuffing Tubes and other meat processing and sausage making equipment, check with your dealer, visit us at: www.lemproducts.com, or send for a free catalog.

LEM Products • 109 May Drive, Harrison, OH 45030 • PH: 877-536-7763 • www.lemproducts.com

5

advertisement

Related manuals

Download PDF

advertisement