SportsArt Fitness 6320 Owner's Manual

U.S.A.

PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

TABLE OF CONTENTS

Introduction

1. Safety Precautions...............................................................................................

1

2. Assembling Your Treadmill...................................................................................

Installation Requirements.....................................................................................

List of parts...........................................................................................................

3

3

3

3. Treadmill Assembly.............................................................................................

Step by Step Instructions....................................................................................

4

4

4. How to Use Your 6320 Treadmill........................................................................

12

5. 6320 Electronic Software.....................................................................................

14

Basic Operation...................................................................................................

Quick Start...........................................................................................................

14

15

15 Display Window Functions..................................................................................

Reverse Mode.....................................................................................................

Programmable Functions....................................................................................

Button Functions.................................................................................................

16

16

18

19

Course Description.............................................................................................

Fitness Test........................................................................................................

HRC....................................................................................................................

Guideline.............................................................................................................

HRC Control Procedures....................................................................................

21

21

22

24

6. Guidelines for Exercise.......................................................................................

26

7. Adjusting the Running Belt.................................................................................

27

8. Floor Level Adjustment.......................................................................................

30

9. Troubleshooting...................................................................................................

31

Service Required.................................................................................................

31

Error Messages....................................................................................................

31

Fuse Failure for incline system..............................................................................

31

Main Fuse Failure.................................................................................................

32

10. Electronic Wiring Schematic...............................................................................

33

PDF created with pdfFactory trial version www.pdffactory.com

SPORTSART 6320 COMMERCIAL TREADMILL

INTRODUCTION

Congratulations on purchasing one of the finest piece of commercial exercise equipment on the market today, the SportsArt 6320 Commercial Treadmill. The 6320 is designed with the end user in mind and constructed of high quality materials and designed for years of trouble-free use.

Before using your SportsArt 6320 Treadmill, we recommend that you familiarize yourself with this Owner's Manual. Whether you are a first time user of a treadmill or a seasoned "PRO", understanding the correct use of the equipment will enhance your ability to achieve your exercise goals safely and successfully.

Electronics Package

Cup Holder

Upright Post

Motor Enclosure

Emergency stop button

Upright Enclosure

Contact HR

(Optional)

Safety Key

Short Handrail

Staging Platform

Running Belt

Incline Roller Wheel

Rear End Cap

Floor Level Adjustment

Belt Adjustment




3

ASSEMBLING YOUR TREADMILL

Installation Requirements

Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each product, occasional errors and/or omissions do occur. In any event should you find the product to be defective or missing a part, please contact your dealer.

Please read this owner's manual and follow the instructions.

Caution:

Two persons are recommended to assemble the treadmill. To avoid back strain, and to ensure safety to the unit and yourself, we suggest you avoid lifting the running bed assembly from box. Instead drop the sides of the box and slide the treadmill from the container rather than lifting it.

IMPORTANT:

The packing for this treadmill was designed to protect it during shipment, please store the original packing in a safe place in case you need to ship the unit in the future.

List of Parts

Before assembling your treadmill, make sure that you have all following items:

1. 8pcs 5/16" x L1" bolts

2. 8pcs 5/16" washers

3. 6pcs 1/4" x L1/2" handlebar bolts (For display area)

4. 8pcs 5/16" x L15" philip screws

5. One screw driver

6. 3pcs hex allen wrench (4mm. 5mm. 6mm)

7. One hex allen wrench with handle. (6mm)

8. Left & Right upright post enclosures. 2pcs

9. Fuse 15A(100V/120V) or 10A(200V/240V)

10. One wrench for emergency release button. (for maintenance purpose)

11. 2pcs rear end cap(L+R)

12. 4pcs M5 x L15" screws (for rear end cap)

13. 4pcs 5/16" x 1" screws( for long handrail or medical handrail)

14. 4pcs 1/4" x 3/4" screws (for medical handrail)

15. 4pcs 1/4" washers (for medical handrail)

16. 8pcs upright post screw caps (for philip screws)

17. 8pcs upright post screw caps (for 5/16" x L1" bolts)


TREADMILL ASSEMBLY

Step by Step Instructions

When you remove the treadmill from its box, first check to make sure all of the parts are present. Then, read through the assembly instructions before you begin.

1. Tip the treadmill on its side. Make sure the running belt is in position in the tracks of the Belt Alignment Guides on the underside of the machine. (See Fig.1). Be sure to remove and dispose of shipping blocks located along the side of the bed and removed from the underside.

Fig.1

2. (1) Rotate upright posts into their respective position, securing each side with the screws provided.

(2) According to Pic. A, press the screw caps to their respective position.

Fig.2


3. Rotate display to fixed position as figure below, attach all side fasteners to position without fully tightened. (See Fig. 3)

FIG.3

4. Insert rear end caps into proper position as figure below (See Fig.4). Be sure the rear end caps have inserted into respected located pins and holes (see portion A), tighten all screws provided.

Located pins & holes

FIG.4


portion A

Insert rear end caps into proper position, and tighten all screws.

For short handrail assembly

5. Insert short handrail into handrail bar bracket, then secure 6 screws provided and fully tighten all side fasteners. (See Fig.5)

FIG.5

6. Press life post's shroud into respective position. (See Fig. 6)

Push in

FIG.6


7. Insert upright post screw caps into proper position. (See Fig.7)

FIG.7

8. Connect power cable as indicated in Fig.8, and fasten it.

FIG.8


For long handrail assembly

5. Insert short handrail into handlebar bracket, then secure the fasteners provided and fully tighten all side fasteners. (See Fig.5-1)

FIG.5-1

6. Press upright post's enclosure into respective position. (See Fig.6-1)

Push in

FIG.6-1


7. Insert upright post screw caps into proper position. (See Fig.7-1)

FIG.7-1

8. Connect power cable as indicated in Fig.8-1, and fasten it.

FIG.8-1


For medical handrail assembly: (New Type)

5. Insert medical handrail into the upper handrail bracket. Attach screws to position without fully tightening. Install medical handrail post and tighten all screws. (See

Fig.5-2)

FIG.5-2

6. Press upright post's enclosure into keyed position. (See Fig.6-2)

Press down

FIG.6-2


7. Insert upright post screw caps into proper position. (See Fig.7-2)

FIG.7-2


HOW TO USE YOUR 6320 TREADMILL:

1. Basic operation:

A. To start using the treadmill:

1. Press any key.

2. Enter AGE (AGE LED will light up), press INCLINE up, down button to select age and then press ENTER.

3. Enter WEIGHT (WEIGHT LED will light up), press INCLINE up, down button to set WEIGHT, and then press ENTER.

4. Select TIME (TIME LED will light up and the minute numeric will flash), press

INCLINE up, down button to set TIME and then press ENTER.

4-1. The pre-set time is 30 minutes.

4-2. When the time is set at "0", the manual mode will be counting up and all the other programmed courses will be counting down mode. The pre-set time will be 30 minutes.

4-3. When the time is not set at "0", (the minimum time will be 10 minutes, and the maximum time will be 99 minutes) then the manual mode and other programmed courses will be counting down.

5. Select Program by pushing the SCROLL button to select your desire course and press ENTER.

6. SPEED display will show 0.0 and flash, press the SPEED up button to start the treadmill.

2. Quick start:

At any time, for Quick Start press the SPEED up button to start the treadmill. The treadmill will start at 0.1mph/0.2kph.

3. Personal Cardio Advisor:

When you enter your age, Personal Cardio Advisor automatically calculates your suggested low, mid and high Heart Rate range, 65%, 72.5%, 80%, of max heart rate.

Please note the Guidelines for Exercise section for further explanation of Heart Rate training ranges.

4. Emergency Stop Button:

This feature is a secondary safety feature that allows the user, in an emergency situation, to stop the treadmill. Once the button has been pushed, rotate the button clockwise to release the emergency stop button. The treadmill will not operate if the button is depressed.


5. Display functions:

A.

DISTANCE

: Displays total miles or kilometers.

B.

CALORIES

: Total accumulated calories burned.

C.

TIME

: Displays total time accumulated or time remaining in a preprogrammed course.

D.

SPEED

: Press these keys to adjust your desired speed. The speed range for the treadmill is from 0.1-12mph (0.2-20kph).

E.

INCLINE

: Press these keys to raise or lower the treadmill. The incline range for the treadmill is from -3% to 22%.

F.

CAL/HR

: Calories consumed per hour at the current rate of exercise.

G.

PACE

: Displays minute per mile or kilometer.

H.

METS (Metabolic Equivalents)

: One MET is equivalent to an oxygen consumption of 3.5 ml/kg/min.

1 MET= 3.5ml/kg/min.

I.

STOP (RESET)

: Press STOP button, treadmill will stop running, time and distance will remain. Holding STOP for 3 second will reset the display.

J.

ENTER

: Value entering confirmed button. Holding ENTER for 3 seconds will show the voltage of city at present. Press any button to exit this function.

AC (Alternating Current) - City voltage.

K.

EMERGENCY STOP BUTTON

: This button allows the user an additional safety feature in case of emergency. Upon pushing the button the treadmill will stop. To reset the button, rotate the button clockwise and the treadmill will reset for proper use.

L.

CHANGE

: Press this button to alternate between 2 groups of information -

DISTANCE, CALORIES, TIME and SPEED; and INCLINE, CAL/HR,

PACE and METS.


6320 Electronic Software

A. Basic operation

Turn on the power. You will see the below SPORTSART scroll message. Please follow the below steps.

SPORTSART

6320

1. Press any button to begin.

2. Enter your age ( the corresponding LED will be lit ), The age default is 35, Press

INCLINE

▲▼ to select age, then press ENTER.

The message will show as below

PRESS INCLINE

▲▼

TO INPUT YOUR AGE, PRESS ENTER

AGE

3. Enter your weight (the corresponding LED will be lit). Press INCLINE select your weight, then press ENTER.

▲▼ to

The message will show as below.

MPH:

PRESS INCLINE

▲▼

TO INPUT YOUR WEIGHT, PRESS ENTER

LB

KPH:

PRESS INCLINE

▲▼

TO INPUT YOUR WEIGHT, PRESS ENTER

KG

***Input the correct weight, so it can show the correct calorie expenditure.

4. Select TIME (TIME LED will light up and the minute numeric will flash), press

INCLINE up, down button to set TIME and then press ENTER.

4-1. The pre-set time is 30 minutes.

4-2. When the time is set at "0", the manual mode will be counting up and all the other programmed courses will be counting down mode. The pre-set time will be 30 minutes.


4-3. When the time is not set at "0", (the minimum time will be 10 minutes, and the maximum time will be 99 minutes) then the manual mode and other programmed courses will be counting down.

The message will show as below

PRESS INCLINE

▲▼

TO SELECT TIME, PRESS ENTER

TIME

B. Quick start

At any time, for Quick Start, press the SPEED up button to start the treadmill. The treadmill will start at 0.1mph/0.2kph.

C. Display Window Functions

1. Personal Cardio Advisor display

When you enter your age information, the software will calculate and display your suggested Heart Rate training zone. It is highly recommended that you always check with your physician to learn what the appropriate heart rate level is for your fitness level.

2. Heart Rate display (For model equips with HTR and/or HRC features)

There are 2 methods of measuring heart rate-1, using a Polar chest strap and 2, using our Contact Heart Rate sensors.

(1) Using the Polar chest strap, the display will indicate by flashing that it is calculating your heart rate and upon receiving a good reading will display your heart rate.

(2) Using the Contact sensors, the display will indicate by flashing that it is calculating your heart rate and upon receiving a good reading will display your heart rate. It is important that you maintain a steady contact with the sensors for best results.

3. Date Feedback displays

This series of displays will provide information that shows your data throughout your workout. The data can be changed from the top row of information

(DISTANCE, CALORIES, TIME and SPEED) to the bottom row (INCLINE,

CAL/HR, PACE and METS) by pressing the CHANGE button.

If you modify your SPEED or INCLINE, the display will automatically show your change in the appropriate display window, then go back to the selected row of information.

DISTANCE

INCLINE

CALORIES

CAL/HR


TIME

PACE

SPEED

METS

D. Reverse Mode

(1) Press CHANGE + ENTER at the same time twice, the SPEED window will show-

0.0. The reversible speed range is 0.1-3 MPH, or 0.2-5 KPH.

(2) Incline is limited within -3% to 3%.

(3) This function is only applicable to MANUAL mode.

Warning: This function might be dangerous. Do not operate treadmill in reverse mode without the direct supervision of a technician, or a health care professional.

E. Programmable functions

These features are not user accessed settings that are recommended for the end user. These features are "buried" in the software for owner settings and monitoring.

(1) Select between MPH and KPH. The default setting is MPH.

(2) The Heart Rate Control (HRC) program will allow you to modify the HRC target heart rate.

(3) Display total accumulated distance on the treadmill.

(4) Display the total accumulated time on the treadmill.

To access these settings and information, while the banner "SPORTSART 6320" is scrolling on the display, press and hold the CHANGE button for 3 seconds. The software will prompt you through these features.

1. MPH/KPH setting will appear as shown below

PRESS

▲▼

TO SELECT MPH/KPH, PRESS ENTER

MPH

press

▲▼ to select MPH or KPH, then press ENTER.

2. The HRC mode will allow you to modify the HRC target heart rate (YES or NO).

PRESS

▲▼

TO SELECT MODIFY HRC TARGET HR

(Y/N)?, PRESS ENTER

NO

Press

▲▼ to select modify HRC target HR. Then press ENTER for YES or No.


YES: Follow display prompts.

NO: No change for the target heart rate is made.

3. Display Total Distance

MPH: shows as below

KPH: shows as below

????? indicates accumulated kilometers/miles.

Press ENTER to advance to total time.

4. Display Total Time

????? indicates accumulated time. Unit is by hour.

Press ENTER to exit and return to banner display.


F. Button functions

SPEED:

1. Press

▲▼ to increase and decrease the belt speed.

2. The speed range is from 0.1mph to 12mph; 0.2kph to 20kph.

3. At any time you can push SPEED up button for QUICK START.

INCLINE:

1. Press

▲▼ to increase and decrease the incline.

2. The incline range is from -3% ~ 22%.

3. Use INCLINE buttons to enter AGE and WEIGHT.

STOP:

1. Press the STOP button to stop the tread belt. All data will remain.

2. Press and hold the STOP button to reset all data.

3. During program use, pushing the STOP button will pause progress of the course and pressing SPEED up button will resume the program.

ENTER:

The button is for entering data (AGE, WEIGHT, etc).

CHANGE:

CHANGE will toggle the feedback between the upper and lower rows of information DISTANCE, CALORIES, TIME, SPEED and INCLINE,

CAL/HR, PACE, METS.

SCROLL:

This button will scroll through the preprogrammed courses for selection.

The corresponding LED will indicate the course.


G. Course Description

The dot matrix display is a 3 color display.

Red represents portions of the program that has been completed.

Orange represents your position within the program.

Green represents the portion of the course to come.

1. Manual: Manual is the default program for QUICK START. Press SPEED up to begin.

Orange Color

Current position

●○○○○○○○○○○○○○○○○○○○○○○

Manual drawing explanation:

(1) Each row indicates Incline elevation, from 0% to 15%.

(2) Current position in orange color.

(3) Passed position in red color.

(4) The coming one in green color.

2. College Track: This program operates identically to Manual. One lap is equal to

0.25 miles.

LAP 1

TIME can be set under all programmed courses (minimum 10 minutes to maximum 99 minutes). Refer to P.13 for the time setting instruction. At the end of the course, the display will prompt you that the treadmill will be going to COOL

DOWN. The speed will change to 2.5 mph and be in manual course.

3. Bay Run

4. River Run

5. Climber's Trek

6. Rocky Ridge

7. White Pass


6. Interval Courses

The interval course are each based on "work" and "rest" periods. Each is defined by speed and incline and can be set at any time. Each period is remembered by the last portion of each period. For example, in the "work" period the moment before it changes to the "rest" period the software will remember the last moment and that will be the settings when it returns to the next "work" period. This is the same for the "rest" period.

7. Interval 1:1 and Interval 1:2

The first number on each course defines the rest period and the second number represents the work period. Each of them are indicating minute increments.

Using the Interval

1. When starting to use this feature, you begin the first segment by using "SPEED to start, or using "INCLINE

▲▼

" to adjust to your desired incline. Picture of

Interval program on the display board will show the first segment either going up or going down; however, the second segment of the picture will remain unchanged.

▲ "

2. When the first segment completed after one minute, the Display will show either

"Going to ? mph, ? %" or "Going to ? kph, ? %." The ? Indicating the SPEED and

INCLINE of the next segment, then continues into second segment. During this segment, you can also adjust to your own desired SPEED and INCLINE, the same as first segment. When the second segment completed, it will go back to the first segment to continus your training.

3. When the pre-set time is reached, the Display will show "COOL DOWN". Then, the SPEED will drop under 2.5 mph/4.0kph, and the INCLINE will back to 0%. The display board will return to MANUAL mode.

Interval 1:2

30 min

Interval 1:1

30 min


H. Fitness Test

1. Press SCROLL key until LED flashes at Fitness Test. If any key is not pressed within 3 seconds, the Display will show "PRESS ENTER".

FIT

TEST

After pressing ENTER, the Display will show the picture of FITNESS TEST.

2. Orange represents your position within the program.

Green represents the portion of the course to come.

Red represents portions of the program that has been completed.

3. Press SPEED

▲ to start testing.

4. During the testing, if either STOP button is pressed, the testing will stop instantly and the Display will scroll the message END OF FITNESS TEST, YOUR SCORE

IS??? ??? means the score.

5. Please note Fitness Test only available when your treadmill equips with HRC feature.

I. HRC (Heart Rate Control):

It your unit is applicable to HRC feature, please refer to the following.

Press "SCROLL" until the LED flashes at HRC, then press "ENTER." If the "ENTER" key is not pressed within 3 seconds, the Display will show "PRESS ENTER".

This HRC offers two trainings for you to choose from:

Heart Rate Control Weight

Loss Training & Heart Rate Control Cardio Training.

When you chooes Heart Rate Control Weight Loss Training, the display will show:

HRC

65%

HeartRate Control Weight Loss Training

30 min


When you choose Heart Rate Control Cardio Training, the display will show:

HRC

80%

HeartRate Control Cardio Training

30 min

This HRC feature offers 4 different scenarios. The selection of each scenario is based on if you input your actual age, and the choice of "MODIFY HRC TARGET HR

(Y/N)".

J. Guideline:

1. How to input your age?

The starting display will show "SPORTSART", you can press any key to enter the next procedure of inputting your age. Press "INCLINE

▲▼

" to input your age, then press "ENTER."

2. Selection of MODIFY HRC TARGET HR (Y/N)

When the starting display shows "SPORTSART", hold "CHANGE" key for 3 seconds to get to selection of MPH/KPH, then press "ENTER". The display will show as the following picture, using

▲▼ to select YES/NO, then press "ENTER".

Display appears like this when you select No

PRESS

▲▼



NO

Display appears like this when you select YES.

PRESS

▲▼



YES


The 4 scenarios are as the following:

Scenario 1:

When you have input your correct age at the beginning, and select NO for the

MODIFY HRC TARGET HR.

Step 1: Press "SCROLL" key until LED flashes at this HRC.

Step 2: Press "ENTER" key to start this feature.

Step 3: You can start using this feature just by pressing the "SPEED

▲

", the computer will directly monitor your heart rate cortrol.

Scenario 2:

When you have input your age at the beginning, but select YES for the MODIFY

HRC TARGET HR.


Step 2: The display will appear "PRESS

LIMIT, PRESS ENTER".

▲▼

TO MODIFY YOUR HEART RATE

Step 3: Using

▲▼ to set your desired Heart Rate, then press "ENTER" to confirm.


▲

", the computer will directly monitor your heart rate control.

Scenario 3:

When you begin by QUICK START, age is not inputted, but choose YES for the



Step 2: Then the display will appear the message of "PRESS

YOUR AGE, PRESS ENTER" and 35.

▲▼

TO INPUT

PRESS

▲▼


AGE 35

Step 3: Please use the

▲▼ to set your age, then press "ENTER".

Step 4: The display will appear "PRESS

LIMIT, PRESS ENTER".

▲▼

TO MODIFY YOUR HEART RATE


Step 5: Using

▲▼ to set your desired Heart Rate, then press "ENTER".


▲


Scenario 4:

When you begin by QUICK START, age is not inputted, and chose NO for the



Step 2: Then the display will appear the message of "PRESS

YOUR AGE, PRESS ENTER" and 35.

▲▼

TO INPUT

PRESS

▲▼


AGE 35

Step 3: Please use the

▲▼ to set your age, then press "ENTER".


▲


K. HRC Control Procedures

If your unit is applicable to HRC feature, please refer to the following.

To start using HRC feature:

1. Please wear the Polar transmitter first, and confirm it is working properly measuring your heart rate.

2. If the machine did not receive signal from the transmitter, the display will scroll the message as the below image. You must use a Polar Transmitter to receive and transmit your heart rate, and to use this HRC feature. The 114 in the below image is an example of heart rate ratio.

114

NO HEARTRATE READING, PLEASE CHECK TRANSMITTER

3. When machine is receiving signal from your polar transmitter normally, the display will appear message as the below image. The 114 in the below image is an example of heart rate ratio.

114

PRESS SPEED

▲


A. Setting the comfortable speed - you can set your own comfortable speed that you want to run. Press the "SPEED

▲▼

" to start treadmill.

You can set your own desired SPEED and INCLINE RATIO during this procedure. When your heart rate is not in the pre-set heart rate zone, TIME will be counting up, and Polar Transmitter will continuously monitor your heart rate until it is within the pre-set heart rate zone, and then start the HEART RATE

CONTROL procedure.

***When the setting of your comfortable speed is too small, it is unlikely to get into the HRC procedure. If your heart rate cannot attain the Target heart rate, please increase your comfortable speed.

B. When you are not within the HRC procedure, the display will show the message as below.

114

WARM UP

C. After your have entered the HRC procedure, the dot matrix LED will scroll you the message "HEART RATE CONTROL STARTING"; at the same time, it will alert you with a beep sound for 3 seconds. TIME that you preset will be showed up on the display and start to count down. When TIME count down to zero indicates completion of the HRC course. At the end of the course, the display will prompt it is going to Cool Down. Speed will change to 2.5mph/4.0kph, and the Incline will reset to zero percent. The display will retrun to MANUAL mode.

4. If you press the "STOP" key anytime when using this machine, it will immediately back to MANUAL mode.

5. When the treadmill does not detect your heart rate signal, the dot matrix LED will show the message as below. If no signal is detected for more than 30 seconds, the treadmill will stop automatically, and return to MANUAL mode.

114

NO HEARTRATE READING, PLEASE CHECK TRANSMITTER

6. When you are using the treadmill with lowest incline, but your heart rate is over the Target HR, the display will show message as below. The SPEED on the display will keep flashing to remind you to decrease your speed.

114

PRESS SPEED DOWN


GUIDELINES FOR EXERCISE

How hard should I exercise?

Studies show that to achieve the benefits of aerobic exercise, it is necessary to work within your training zone. Your training zone depends on your age and level of fitness.

The above chart indicates the recommended Heart Rate training zones (darkened area of the chart). These figuress are calculated by taking 220 minus your age, and calculating 80% for your maximum and 65% for the minimum heart rate for aerobic exercise.

HE

CAUTION:

Heart Rate training zones are approximations. Always check with your physicians to learn what appropriate heart rate level is best for your fitness level.

How long should I exercise?

The duration of your exercise session depends on your fitness level. In general, it is recommended that you maintain your heart rate in the training zone for at least 15 to

20 minutes to realize an aerobic benefit. Beginners should always start slowly and bring their workout sessions up to 20 minutes or more. As your fitness level increases, you will be able to maintain your heart rate in the training zone for longer periods: Usually between 20 and 30 minutes.

When first starting your workout, use the first several minutes to warm up, then slowly increase your workload to bring your heart rate into your specific training zone.

At the end of your workout, gradually decease your workload, then exercise lightly as a "cool down".

How often should I exercise?

Research indicates to achieve the greatest benefits, should be performed 3-5 times a week. It is important to allow sufficient time, at least 24 hours, for your body to recover after exercise.


ADJUSTING THE RUNNING BELT

The 6320 treadmill includes a belt alignment gauge located on the left side of the motor enclosure. The edge of the running belt should be in the middle of the green portion of the gauge. If the belt edge is in the green area, the belt is properly adjusted. If the edge of the belt is in the red portion, the belt needs adjusting immediately (see Fig.6).

Fig.6-2

Fig.6-1

Belt Alignment

Gauge

Fig.6

The belt is properly aligned at the factory. However, during shipping and handling or by use on an uneven surface, the belt may move off center. Therefore, it is important that you check the belt's alignment before using the treadmill. The correct alignment of the running belt is critical for the smooth operation of the treadmill.

CAUTION: DO NOT ALLOW ANYONE TO WALK ON RUNNING BELT DURING

THIS PROCEDURE.

Failure to realign the belt could result in tearing or fraying of the belt, which is not covered in the warranty.

Please follow the belt adjustment procedure listed below:

1. Turn on the power switch located on the front of treadmill.

2. Press the SPEED

▲ button to increase the speed until the speed reaches

2.0mph/3.2kph on the display.

3. While the unit is running at 2 mph/3.2kph, determine where the belt is in relation to the belt alignment gauge.

4. Should the belt be in the red color range, follow the steps below to return the belt to the proper operating position.


5. If the belt is in the left red zone, using the hex Allen wrench, turn the left belt adjustment bolt, located at the rear of the treadmill, clockwise 1/4 turn at a time,

Then turn the right belt adjustment bolt counter-clockwise 1/4 turn. Let the treadmill run 30 seconds. Always checking the position of the belt in the color gauge. If the belt still has not returned to the green safety zone, repeat with another 1/4 turn until the belt has returned to the middle of the green area. Do not turn adjusting bolt more than1 /4 turn at a time.

If the belt is on the edge of the green color, please adjust it so it is in the middle of the green color. You may turn the adjustment bolt less than 1/4 turn at a time.

6. Conversely, if the belt is in the right red zone, turn the right belt adjustment bolt clockwise 1/4 turn, then turn the left adjustment bolt counterclockwise 1/4 turn.

Let the treadmill run at least 30 seconds, while checking the position of the belt in the color gauge. If it still has not returned to the green safety zone, repeat with another 1/4 turn until the belt has returned to the middle of the green area. Do not turn adjusting bolt more than 1/4 turn at a time.

7. When the belt is back in the green "safety zone", you can continue your regular use of the treadmill. Slowly increase the speed of the unit to 5.5 MPH (9 KPH), and let it run for at least 45 seconds.

8. When you are using the treadmill, if you feel a pause in the belt with each foot plant the belt is too loose. Stop the machine, adjust both rear roller bolts clockwise 1/2 turn at a time. Try the machine again, then check the result, if more adjusting is required, give both adjusting bolts another slight turn. Do not adjust over 2 fullturns.

9. If the belt is too tight, this will adversely effect the life of the unit.

10. To check the correct tension of the belt, hold the belt in the middle, and lift up about 30m/m (1 1/8") or 3kg (6.6 pounds) of force (see Fig.7,7-1,7-2).

Fig.7-1

Center

Fig.7-3

Fig.7-2


11. If the belt is too loose, you can tighten the belt by equally adjusting both rear roller bolts clockwise 1/2 turn at a time. Conversely, if the belt is too tight, adjust both rear roller bolts counterclockwise 1/2 turn at a time (see Fig.7-3).

Fig.7-3

Periodically monitor the position of the belt to ensure peak performance

CAUTION:

To avoid injury, special care must be taken when adjusting the running belt. Remove any loose clothing or shoes lace and tie back your hair. Be very careful to keep your fingers or any other objects clear of the belt and rollers.

The treadmill is designed to carry specific weights. The treadmill will not stop immediately if any object becomes caught in the belt or rollers.

Over tightening of the belt causes damage and premature failure of the precision bearings in the front and rear rollers.


FLOOR LEVEL ADJUSTMENT

If the treadmill is unsteady on your floor, turn the floor level adjustment on the rear feet of the treadmill. Raise or lower the floor level adjustment to steady your treadmill

(see Fig.8)

Fig.8


TROUBLE SHOOTING

Service Required

When Service Required LED lights up, It will scroll the message of "Service

Required treadmill shutting down stopping" in the electronic display. Then the treadmill stops running automatically and shows up the accumulative distance data in the 7-segment display. Please contact your dealer for more information.

Error messages

1. E-1: The optical switch mounted on the motor is not receiving the signal reflected from the tachometer wheel. Please contact your dealer.

2. E-3: The user is running faster than the belt. Please turn off the machine and try normal use again.

3. E-7: The electronics are receiving the signal reflected from the VR

(Potentiometer) incorrectly, which means the terminal wires are either disconnected or the VR is damaged. Please contact your dealer for more information.

4. E-11: The motor is functioning incorrectly.

Fuse Failure For Incline System

If the incline system still does not function after changing the fuse, please contact your dealer for more information.


Main Fuse Failure

If nothing is displayed on the electronics display, please check the POWER switch located on the front of the treadmill. If it is ON, then the fuse may be damaged and must be replaced.

CAUTION:

MAKE SURE THE TREADMILL POWER PLUG IS REMOVED FROM

OUTLET BEFORE REPLACING THE FUSE.

There is one fuse holder located at the front, inside of the treadmill frame, (15 amp/100-120volts or 10 amp/220-240volts). This is for the Main Power (see Fig.9).

Please make sure to check your standard voltage prior to selecting correct fuse for replacement.

To remove the Main fuse, push the fuse holder in and turn the holder counterclockwise and remove the fuse holder with fuse. Replace the damaged fuse and insert a new one, reinstall the holder, then turn clockwise to secure.

(See Fig.9-1 to Fig.9-3).

Fig.9

Fig.9-1

Fig.9-2

Fig.9-3

If the treadmill does not work after changing the fuse, please contact your dealer for more information.

To further disable the treadmill from use, you can remove the fuse to make the unit in-operable.


Wiring Schematic:

Your Authorized Distributor


6320

SportsArt Fitness 6320 Owner's Manual

TABLE OF CONTENTS

Introduction

SPORTSART 6320 COMMERCIAL TREADMILL

INTRODUCTION

ASSEMBLING YOUR TREADMILL

TREADMILL ASSEMBLY

HOW TO USE YOUR 6320 TREADMILL:

6320 Electronic Software

Orange Color

Current position

LAP 1

HeartRate Control Weight Loss Training

30 min

HeartRate Control Cardio Training

30 min

GUIDELINES FOR EXERCISE

ADJUSTING THE RUNNING BELT

FLOOR LEVEL ADJUSTMENT

TROUBLE SHOOTING

Your Authorized Distributor

Related manuals

SportsArt

3110

SportsArt

3110-HTR

SportsArt

3106

SportsArt

1260

SportsArt

5005

SportsArt

3108

SportsArt

1210S

SportsArt

6005

SportsArt

1210