HDV-HDMI-TZ
HDV-HDMI-RZ
HDV-HDMI-RZ-K
HDV-HDMI-TZ-A-K
HDV-HDMI-TZ-K HDV-HDMI-RZ-A-K
HD View HDMI Transmitter and Receiver
BLACK BOX with remote Ethernet peripherals.
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]
FCC and IC RFI Statements
FEDERAL COMMUNICATIONS COMMISSION AND
INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication.
It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le
Règlement sur le brouillage radioélectrique publié par Industrie Canada.
Normas Oficiales Mexicanas (NOM)
Electrical Safety Statement
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
Page 2 724-746-5500 | blackbox.com
NOM Statement
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8. Servicio — El usuario no debe intentar dar servicio al equipo eléctrico más allá lo descrito en las instrucciones de operación. Todo otro servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
724-746-5500 | blackbox.com
Page 3
NOM Statement
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
Page 4 724-746-5500 | blackbox.com
Trademarks Used in this Manual
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
724-746-5500 | blackbox.com
Page 5
Table of Contents
Contents
Chapter Page
1. Specifications ................................................................................................7
2. Overview ..................................................................................................8
2.1 Introduction ..........................................................................................8
2.2 Features ................................................................................................8
2.3 What’s Included ...................................................................................8
2.4 Hardware Description .........................................................................10
2.4.1 Transmitter ..............................................................................10
2.4.2 Receiver ................................................................................... 11
3. Installation ................................................................................................ 12
3.1 Compatible Cabling ............................................................................ 12
3.2 Pre-Installation Guidelines .................................................................. 12
3.3 Media Distribution .............................................................................. 12
3.3.1 Connecting the Player and the Screen ................................... 14
3.3.2 Connecting the System Cable ................................................ 14
3.3.3 Connecting to the Power Supply ............................................ 14
3.3.4 Mounting the Receiver ........................................................... 14
4. Operation ................................................................................................ 15
4.1 Serial Control ...................................................................................... 15
4.2 Terminal IP Connectivity .....................................................................16
4.3 Scalability ............................................................................................ 17
Page 6 724-746-5500 | blackbox.com
Chapter 1: Specifications
1. Specifications
Maximum Resolution — HDV-HDMI-TZ-K , HDV-HDMI-TZ, HDV-HDMI-RZ-K,
HDV-HDMI-RZ: 1080p, 60 Hz, 24-bit per pixel, uncompressed
Mounting — VESA
MTBF — 400,000 hours
Speed — 100 Mbps Ethernet (for network ports only)
Connectors — HDV-HDMI-TZ-K, HDV-HDMI-TZ: (1) 1.65-mm connector
for DC power, (1) DB9 serial, (1) RJ-45 for Ethernet, (1) DisplayPort, (1) HDMI,
(1) RJ-45 for System;
HDV-HDMI-RZ-K, HDV-HDMI-RZ: (1) 1.65-mm connector for DC power,
(1) 3.5-mm connector, (1) RJ-45 for System, (1) HDMI, (1) RJ-45 for Ethernet,
(1) DB9 serial
Indicators — HDV-HDMI-TZ-K, HDV-HDMI-TZ: (3) LEDs: (1) Power, (1) Ethernet,
(1) System;
HDV-HDMI-RZ-K, HDV-HDMI-RZ: (2) LEDs: (1) Ethernet, (1) System
Temperature Tolerance — Operating: 32 to 104° F (0 to 40° C);
Storage: -40 to +185° F (-40 to +85° C)
Power — HDV-HDMI-TZ-K, HDV-HDMI-TZ, HDV-HDMI-RZ-K,
HDV-HDMI-RZ: Each has (1) 12-VDC, 2-A power supply;
Consumption: HDV-HDMI-TZ, HDV-HDMI-TZ-K: 5 W;
HDV-HDMI-RZ-K, HDV-HDMI-RZ: 7 W
Size — HDV-HDMI-TZ-K, HDV-HDMI-TZ: 1.6"H x 5.4"W x 5.5"D
(4 x 13.9 x 14 cm);
HDV-HDMI-RZ-K, HDV-HDMI-RZ: 1.1"H x 7.5"W x 4.8"D (2.7 x 19 x 12.3 cm)
Weight — HDV-HDMI-TZ-K, HDV-HDMI-TZ, HDV-HDMI-RZ, HDV-HDMI-RZ-K:
0.8 lb. (0.36 kg) each unit
724-746-5500 | blackbox.com
Page 7
Chapter 2: Overview
2. Overview
2.1 Introduction
The HD View ™ HDMI Transmitter and Receiver system delivers real-time digital non-compressed content to digital signage terminals up to 2000 feet (300 m) away (when cascaded).
2.2 Features
The HD View HDMI offers the following high-level capabilities:
• Media distribution
• Display serial control
• Terminal IP connectivity
• Scalability
2.3 What’s Included
Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or [email protected].
HDV-HDMI-TZ-K:
• HD View HDMI Transmitter
• Power adapter
• This user’s manual
HDV-HDMI-RZ-K:
• HD View HDMI Receiver
• Power adapter
• This user’s manual
HDV-HDMI-TZ:
• HD View HDMI Transmitter
Page 8 724-746-5500 | blackbox.com
• 5-foot (1.5-m) HDMI cable, male/male black jacket
• 6-foot (1.8-m) CAT5 cable, 24 AWG
• 6-foot (1.8-m) DisplayPort cable
• DB9 serial cable
• Power adapter
• This user’s manual
HDV-HDMI-RZ:
• HD View HDMI Receiver
• 5-foot (1.5-m) HDMI cable, male/male black jacket
• 6-foot (1.8-m) CAT5 cable, 24 AWG
• 3.5-mm monitoring cable
• DB9 serial cable
• Power adapter
• This user’s manual
HDV-HDMI-TZ-A-K:
• 5-foot (1.5-m) HDMI cable, male/male black jacket
• 6-foot (1.8-m) CAT5 cable, 24 AWG
• 6-foot (1.8-m) DisplayPort cable
• DB9 serial cable
HDV-HDMI-RZ-A-K:
• 5-foot (1.5-m) HDMI cable, male/male black jacket
• 6-foot (1.8-m) CAT5 cable, 24 AWG
• 3.5-mm monitoring cable
• DB9 serial cable
724-746-5500 | blackbox.com
Chapter 2: Overview
Page 9
Chapter 2: Overview
2.4 Hardware Description
2.4.1 Transmitter
Figures 2-1 and 2-2 show the transmitter’s front and back panels. Table 2-1 describes its components.
2
1
Figure 2-1. HDV-HDMI-TZ front panel.
3 8 4 8 5 9 6 9
7
8
5
6
9
2
3
Number
1
4
Page 10
7
Figure 2-2. HDV-HDMI-TZ back panel.
Table 2-1. Transmitter front- and back-panel components.
Component
Power LED
Description
Lights when power to the unit is on.
1.65-mm connector Links to 12-VDC power in.
DB9 connector Links to serial port for terminal control.
RJ-45 connector Used for IP extension.
DisplayPort
RJ-45 connector
HDMI
(2) Ethernet LEDs
(2) System LEDs
Connects to DP++ player.
Links system cable to the receiver.
Connects to HDMI 1.3 player.
(1) TX, (1) RX
(1) TX, (1) RX
724-746-5500 | blackbox.com
Chapter 2: Overview
2.4.2 Receiver
Figure 2-3 shows the receiver’s back panel. Table 2-2 describes its components.
3 7 4 7 8 5 8 6
6
7
4
5
8
2
3
Number
1
1 2
Figure 2-3. HDV-HDMI-RZ back panel.
Table 2-2. Receiver back-panel components.
Component Description
1.65-mm connector Links to 12-VDC power in.
HDMI connector
3.5-mm connector
Used for HDMI 3.1 communication to the display.
Reserved for future use.
RJ-45 connector
RJ-45 conector
DB9 connector
(2) System LEDs
(2) Ethernet LEDs
Links to system cable from the transmitter.
Used for IP connectivity to the display and/or peripherals.
Used for serial control.
(1) TX, (1) RX
(1) TX, (1) RX
724-746-5500 | blackbox.com
Page 11
Chapter 3: Installation
3. Installation
3.1 Compatible Cabling
The HDV-HDMI-TZ and HDV-HDMI-RZ products work with CAT5e/6/7 FTP/UTP network cable.
3.2 Pre-Installation Guidelines
Make sure that the player and the screens are compatibile. Check that they work together before connecting the HD View HDMI Transmitter and Receiver.
3.3 Media Distribution
The HD View HDMI Transmitter and Receiver can distribute HD digital media from a single player to a single display located 330 feet (100 m)away. Figure 3-1 illustrates this configuration.
Player
HDMI or DP cable
HDMI cable
Transmitter
System cable
(up to 330 feet [100 m])
Receiver
Figure 3-1. Media distribution to a single display.
Figures 3-2 and 3-3 illustrate all the connections to the HDV-HDMI-TZ series and HDV-HDMI-RZ products. Not all the connections are always needed.
This section explains the basic connections. Sections 3.3.1–3.3.4 explain the circumstances that require additional connections.
Page 12 724-746-5500 | blackbox.com
Ethernet cable to network
Chapter 3: Installation
CAT5e cable to receiver system port
Power connector
Serial cable to player
DP cable to player
HDMI cable to player
Figure 3-2. Transmitter connections.
CAT5 cable from transmitter system port
Ethernet cable to remote peripheral network device
Power connector
HDMI cable to display
Serial cable to display control
Figure 3-3. Receiver connections.
724-746-5500 | blackbox.com
Page 13
Chapter 3: Installation
3.3.1 Connecting the Player and the Screen
Connect the player to the transmitter HDMI port using an HDMI-to-HDMI cable
(Type A, male/male) or connect a DP cable to the DP port (DisplayPort male/ male). If both are used and active, the HDMI will take priority.
Connect the screen to the receiver HDMI port using an HDMI-to-HDMI cable
(Type A, male/male).
3.3.2 Connecting the System Cable
Connect a system cable (up to 330 feet [100 m]) between the system port of the transmitter and the system port of the receiver.
3.3.3 Connecting to the Power Supply
Connect the transmitter and receiver to the power supply with the included
12-V/2-A DC power adapters.
Once connected, the system is ready to transmit the video and audio signals.
3.3.4 Mounting the Receiver
The receiver has VESA standard screw holes, located 10-cm apart, as shown in
Figure 3-4. Use two screws (included with the receiver and monitor) to connect the unit to the back of the monitor.
3.9" (10 cm)
Figure 3-4. Mounting using the VESA screw holes on the receiver.
Page 14 724-746-5500 | blackbox.com
Chapter 4: Operation
4. Operation
4.1 Serial Control
To enable serial control of remote displays:
1. Connect a serial (DB9 male/female) cable between the player and the transmitter.
2. Connect a serial (DB9 female/female) cable between the receiver and the screen.
Figure 4-1 illustrates the connections.
Player
HDMI or
DP cable
Serial cable Serial cable
HDMI cable
Transmitter
System cable
(Up to 330 ft. [100 m])
Figure 4-1. Serial control.
Receiver
724-746-5500 | blackbox.com
Page 15
Chapter 4: Operation
4.2 Terminal IP Connectivity
To extend a network from the transmitter side to the remote terminal side:
1. Connect a standard Ethernet cable (10-/100BASE-T cable, wired straight-through to conform to T568B standard) between the player side network and the transmitter.
2 Connect a standard Ethernet cable (10-/100BASE-T cable, wired straight-through to conform to T568B standard) between the receiver and the terminal side units.
After you make these connections, you can create an extended IP segment using the extension system.
NOTE: Make sure you have DHCP enabled on your network, because you cannot set/configure the IP addresses in the TX/RX units.
Continuous logical network
Same IP segment
Ethernet/
IP switch
Ethernet cable
IP camera
Player
HDMI or
DP cable
System cable
HDMI cable
Display
Ethernet cable
Page 16
Transmitter Receiver
Figure 4-2. Terminal IP connectivity.
724-746-5500 | blackbox.com
Chapter 4: Operation
4.3 Scalability
Cascade a receiver with a transmitter to increase the system distance.
Cascading to Increase the Distance
Cascade up to six distribution systems to increase the distance up to 2000 feet
(600 m). Figure 4-3 illustrates a two-hop cascaded system.
Ethernet/IP switch
Ethernet cable
Player
HDMI or
DP cable
Serial cable
Ethernet cable
Serial cable
HDMI cable
Serial cable
HDMI cable
Ethernet/IP switch
Ethernet cable
Transmitter
System cable
(up to 330 ft.
[100 m])
Receiver Transmitter
System cable
(up to 330 ft.
[100 m])
Receiver
Figure 4-3. Hop cascaded system.
To connect the receiver to the transmitter, connect the following cables as shown in Figure 4-3:
• HDMI to HDMI (Type A, male/male).
• For serial control: Serial cable (DB9 male/female). See Section 4.1.
• For IP connectivity: Ethernet 10-/100BASE-T straight-through cable (T568B).
See Section 4.2.
724-746-5500 | blackbox.com
Page 17
Chapter 4: Operation
Figure 4-4 illustrates a hop cascaded system up to 2000 feet (600 m).
Player
System cable (up to 2000 ft. [609 m])
T R T
T = Transmitter
R = Receiver
R T R T R T R T
Figure 4-4. Six-hop cascaded system.
R
Page 18 724-746-5500 | blackbox.com
NOTES
724-746-5500 | blackbox.com
Page 19
Black Box Tech Support: FREE! Live. 24/7.
Tech support the way it should be.
Great tech support is just 30 seconds away at
724-746-5500 or blackbox.com.
About Black Box
Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech Support available in 30 seconds or less.
© Copyright 2011. Black Box Corporation. All rights reserved.
HDV-HDMI-TZ version 1
724-746-5500 | blackbox.com
BLACK BOX
®
