- Home
- Home security & automation
- Security access control systems
- Paxton
- Net2 desktop reader, USB
- Specification
advertisement
28/09/2010
Ins-30081 Net2 desktop reader USB
Paxton
Technical Support
01273 811011
[email protected]
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Desktop Reader
The desktop reader is designed to sit next to the PC. It is used for adding tokens to a Net2 system and also for identifying lost cards. Additional workstations can also have desktop readers.
With the Net2 software running, any new token presented above the desktop reader will cause the new user wizard to appear with the card number displayed. Additional user details can then be entered.
If the token is already known to the system, the relevant user’s record will appear.
Paxton
Installation
The power for the unit is supplied via the USB cable. No additional power supply is required.
Plug the reader into a convenient USB port on the PC using the supplied USB cable.
Stop and then restart the Net2 server program. The device will now be available to the Net2 program.
This unit requires Net2 v3.09 or later software. Support for Mifare cards requires v4.17 or later.
Call Technical Support if you require a software upgrade.
Environment
Operating temperature
Waterproof
Electrical
Voltage
Current
Dimensions
Specifications
Min
0 °C
Min
4.75V DC
Width
115 mm
Max
+55 °C
Max
5.25V DC
100 mA
Depth
75 mm
No
USB certified
Height
19 mm
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
advertisement
Related manuals
advertisement