Bitdefender AntiVirus Plus 2013 User's Guide

indicates pending issues by changing its color as follows:

Red color: Critical issues are affecting the security of your system. They require your immediate attention and must be fixed as soon as possible.

Yellow color: Non-critical issues are affecting the security of your system. You should check and fix them when you have the time.

Also, if you move the mouse cursor over the icon, a pop-up will confirm the existence of pending issues.

When you open the Bitdefender window, the Security status area on the upper toolbar will indicate the number and nature of issues affecting your system.

5.2.1. Fix All Issues wizard

To fix detected issues follow the Fix All Issues wizard.

1. To open the wizard, do any of the following:

● Right-click the Bitdefender icon in the

and choose Fix All Issues.

Depending on the detected issues, the icon is either red (indicating critical issues) or yellow (indicating non-critical issues).

● Open the Bitdefender window and click anywhere inside the Security status area on the upper toolbar (for example, you can click the button).

Fix All Issues

2. You can see the issues affecting the security of your computer and data. All current issues are selected to be fixed.

If you do not want to fix a specific issue right away, clear the corresponding check box. You will be prompted to specify for how long to postpone fixing the issue.

Choose the desired option from the menu and click OK. To stop monitoring the respective issue category, choose Permanently.

The issue status will change to Postpone and no action will be taken to fix the issue.

3. To fix the selected issues, click Start. Some issues are fixed immediately. For others, a wizard helps you fix them.

The issues that this wizard helps you fix can be grouped into these main categories:

● Disabled security settings. Such issues are fixed immediately, by enabling the respective security settings.

The basics 13

Bitdefender Antivirus Plus 2013

● Preventive security tasks you need to perform. When fixing such issues, a wizard helps you successfully complete the task.

5.2.2. Configuring status alerts

Bitdefender can inform you when issues are detected in the operation of the following program components:

● Antivirus

● Update

● Browser Security

You can configure the alert system to best serve your security needs by choosing which specific issues to be informed about. Follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the Advanced tab.

5. Click the Configure status alerts link.

6. Click the switches to turn on or off status alerts according to your preferences.

5.3. Events

Bitdefender keeps a detailed log of events concerning its activity on your computer.

Whenever something relevant to the security of your system or data happens, a new message is added to the Bitdefender Events, in a similar way to a new e-mail appearing in your Inbox.

Events are a very important tool in monitoring and managing your Bitdefender protection. For instance, you can easily check if the update was successfully performed, if malware was found on your computer etc. Additionally, you can take further action if needed or change actions taken by Bitdefender.

To access the Events log, follow these steps:

1. Open the

2. Click the Events on the upper toolbar to open the Events Overview window.

Messages are grouped according to the Bitdefender module whose activity they are related to:

● Antivirus

● Privacy Control

● Update

● Safego

The basics 14

Bitdefender Antivirus Plus 2013

Events counters are displayed in the Bitdefender interface to allow easy identification of areas with outstanding events. These are icons appearing on specific modules that indicate the number of unread critical events related to a module's activity.

For example, if there is one unread critical event related to the activity of the Update module, the icon appears on the Update panel.

A counter showing the total number of unread messages from all modules appears on the Events button in the main window.

A list of events is available for each category. To find out information about a particular event in the list, click it. Event details are displayed in the lower part of the window. Each event comes with the following information: a short description, the action Bitdefender took on it when it happened, and the date and time when it occurred. Options may be provided to take further action if needed.

You can filter events by their importance. There are three types of events, each type indicated by a specific icon:

Information events indicate successful operations.

Warning events indicate non-critical issues. You should check and fix them when you have the time.

Critical events indicate critical issues. You should check them immediately.

To help you easily manage logged events, each section of the Events window provides options to delete or mark as read all events in that section.

5.4. Autopilot

For all the users who want nothing more from their security solution than to be protected without being bothered, Bitdefender Antivirus Plus 2013 has been designed with a built-in Autopilot mode.

While on Autopilot, Bitdefender applies an optimal security configuration and takes all security-related decisions for you. This means you will see no pop-ups, no alerts and you will not have to configure any settings whatsoever.

In Autopilot mode, Bitdefender automatically fixes critical issues, enables and quietly manages:

● Antivirus protection, provided by on-access scanning and continuous scanning.

● Privacy protection, provided by antiphishing and antimalware filtering for your web browsing.

● Automatic updates.

To turn the Autopilot on or off, follow these steps:

1. Open the

The basics 15

Bitdefender Antivirus Plus 2013

2. Click the User Mode / Autopilot switch on the upper toolbar. When the switch is on the User Mode position, the Autopilot is off.

As long as the Autopilot is on, the Bitdefender icon in the system tray changes to

Important

While the Autopilot is on, modifying any of the settings it manages will result in it being turned off.

To see a history of actions performed by Bitdefender while Autopilot was engaged, open the

window.

5.5. Game Mode and Laptop Mode

Some computer activities, such as games or presentations, require increased system responsiveness and performance, and no interruptions. When your laptop is running on battery power, it is best that unnecessary operations, which consume additional power, be postponed until the laptop is connected back to A/C power.

To adapt to these particular situations, Bitdefender Antivirus Plus 2013 includes two special operation modes:

● Game Mode

● Laptop Mode

5.5.1. Game Mode

Game Mode temporarily modifies protection settings so as to minimize their impact on system performance. The following settings are applied when Game Mode is on:

● All Bitdefender alerts and pop-ups are disabled.

● On-access scanning

is set to the Permissive protection level.

● Autoscan is turned off. Autoscan finds and uses time-slices when system resource usage falls below a certain threshold to perform recurring scans of the entire system.

● Auto Update is turned off.

● The Bitdefender toolbar in your web browser is disabled when you play browser-based online games.

While in Game Mode, the Bitdefender icon in the system tray changes to .

Using Game Mode

By default, Bitdefender automatically enters Game Mode when you start a game from the Bitdefender's list of known games or when an application goes to full

The basics 16

Bitdefender Antivirus Plus 2013 screen. Bitdefender will automatically return to the normal operation mode when you close the game or when the detected application exits full screen.

If you want to manually turn on Game Mode, use one of the following methods:

● Right-click the Bitdefender icon in the system tray and select Turn Game Mode

On.

● Enable using Game Mode

keyboard shortcut

. Press Ctrl+Shift+Alt+G (the default hotkey).

Important

Do not forget to turn Game Mode off when you finish. To do this, use the same methods you did when you turned it on.

Turning on or off automatic Game Mode

To turn on or off automatic game mode, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the General tab.

5. Turn on or off automatic game mode by clicking the corresponding switch.

Manually adding games to the Game list

If Bitdefender does not automatically enter Game Mode when you launch a certain game or application, you can manually add the application to the Game list. Once an application is added to the list, Bitdefender will operate in Game Mode as long as the application is in use.

To view and manage the Game list, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the General tab.

5. Click the Game list link.

Two buttons are available at the bottom of the list:

● Add game - add a new game or application to the Game list.

A new window will appear. Browse to the application's executable file, select it and click OK to add it to the list.

● Remove game - remove a selected game or application from the list.

The basics 17

Bitdefender Antivirus Plus 2013

Game Mode keyboard shortcut

To set and use a keyboard shortcut for entering / leaving Game Mode, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the General tab.

5. Make sure the Game Mode keyboard shortcut switch is on.

6. Set the desired combination: a. The default combination is Ctrl+Alt+Shift+G.

Choose the modifier keys you want to use by checking one the following:

Control key (Ctrl), Shift key (Shift) or Alternate key (Alt).

b. In the edit field, type the letter corresponding to the regular key you want to use.

For example, if you want to use the Ctrl+Alt+D hotkey, you must check only

Ctrl and Alt and type D.

Note

To disable the shortcut, turn off the Game Mode keyboard shortcut switch.

5.5.2. Laptop Mode

Laptop Mode is especially designed for laptop and notebook users. Its purpose is to minimize Bitdefender's impact on power consumption while these devices are running on battery. When Bitdefender operates in Laptop Mode, the Autoscan and

Auto Update features are turned off, as they require more system resources and, implicitly, increase power consumption.

Bitdefender detects when your laptop has switched to battery power and it automatically enters Laptop Mode. Likewise, Bitdefender automatically exits Laptop

Mode, when it detects the laptop is no longer running on battery.

To turn on or off automatic laptop mode, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the General tab.

5. Turn on or off automatic laptop mode by clicking the corresponding switch.

The basics 18

Bitdefender Antivirus Plus 2013

If Bitdefender is not installed on a laptop, turn off automatic laptop mode.

5.6. Password-protecting Bitdefender settings

If you are not the only person with administrative rights using this computer, it is recommended that you protect your Bitdefender settings with a password.

To configure password protection for the Bitdefender settings, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the General tab.

5. Turn on password protection by clicking the switch.

6. Click the Change password link.

7. Enter the password in the two fields and then click OK. The password must be at least 8 characters long.

Once you have set a password, anyone trying to change the Bitdefender settings will first have to provide the password.

Important

Be sure to remember your password or keep a record of it in a safe place. If you forget the password, you will have to reinstall the program or to contact Bitdefender for support.

To remove password protection, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the General tab.

5. Turn off password protection by clicking the switch. Enter the password and then click OK.

5.7. Anonymous usage reports

By default, Bitdefender sends reports containing information about how you use it to Bitdefender servers. This information is essential for improving the product and can help us offer you a better experience in the future. Please note that these reports will contain no confidential data, such as your name or IP address, and that they will not be used for commercial purposes.

In case you want to stop sending Anonymous usage reports, follow these steps:

The basics 19

Bitdefender Antivirus Plus 2013

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the Advanced tab.

5. Click the switch to turn off Anonymous usage reports.

The basics 20

Bitdefender Antivirus Plus 2013

6. Bitdefender interface

Bitdefender Antivirus Plus 2013 meets the needs of computer beginners and very technical people alike. Its graphical user interface is designed to suit each and every category of users.

To see the status of the product and perform essential tasks, the Bitdefender

system tray icon

is available at any time.

The

main window

gives you access to important product information, the program modules and lets you perform common tasks. From the main window you can access the

settings window

for detailed configuration and advanced administrative tasks, and the

“Fixing issues” (p. 12) .

window for an in-depth log of Bitdefender activity.

If you want to keep a constant eye on essential security information and have quick access to key settings, add the

Security Widget

to your desktop.

6.1. System tray icon

To manage the entire product more quickly, you can use the Bitdefender icon in the system tray.

Note

If you are using Windows Vista or Windows 7, the Bitdefender icon may not be visible at all times. To make the icon appear permanently, follow these steps:

1. Click the arrow in the lower-right corner of the screen.

2. Click Customize... to open the Notification Area Icons window.

3. Select the option Show icons and notifications for the Bitdefender Agent icon.

If you double-click this icon, Bitdefender will open. Also, by right-clicking the icon, a contextual menu will allow you to quickly manage the Bitdefender product.

● Show - opens the main window of Bitdefender.

● About - opens a window where you can see information about Bitdefender and where to look for help in case something unexpected appears.

● Fix All Issues - helps you remove current security vulnerabilities. If the option is unavailable, there are no issues to be fixed. For detailed information, please refer to

● Turn Game Mode On / Off - activates / deactivates

Game Mode .

Tray Icon

Bitdefender interface 21

Bitdefender Antivirus Plus 2013

● Hide / Show Security Widget - enables / disables

Security Widget .

● Update Now - starts an immediate update. You can follow the update status in the Update panel of the main Bitdefender window.

The Bitdefender system tray icon informs you when issues affect your computer or how the product operates, by displaying a special symbol, as follows:

Critical issues are affecting the security of your system. They require your immediate attention and must be fixed as soon as possible.

Non-critical issues are affecting the security of your system. You should check and fix them when you have the time.

The product operates in

Game Mode .

Bitdefender

Autopilot

is engaged.

If Bitdefender is not working, the system tray icon appears on a gray background:

. This usually happens when the license key expires. It can also occur when the

Bitdefender services are not responding or when other errors affect the normal operation of Bitdefender.

6.2. Main window

The main Bitdefender window allows you to perform common tasks, quickly fix security issues, view information about events in product operation and configure product settings. Everything is just a few clicks away.

The window is organized in two main areas:

Upper toolbar

This is where you can check your computer's security status and access important tasks.

Panels area

This is where you can manage the main Bitdefender modules.

The

MyBitdefender

drop-down menu at the top of the window lets you manage your account and access the online features of your product from the account dashboard.

You can find several useful links on the lower part of the window. These links are also available in the

“Fixing issues” (p. 12) .

and

Settings

windows.

Link

Number of days left

Description

The time remaining before your current license expires is displayed. Click the link to open a window where you can see more information about your license key or register your product with a new license key.

Bitdefender interface 22

Bitdefender Antivirus Plus 2013

Link Description

Feedback Opens a web page in your browser where you can take a short survey about your experience in using the product. We rely on your feedback in our constant quest to improve Bitdefender products.

Help and Support Click this link if you need help with Bitdefender. A new window will appear where you can open the product help, go to the

Support Center or contact support.

Adds question marks in different areas of the Bitdefender window to help you easily find information about the different interface elements.

Move your mouse cursor over a mark to see quick information about the element next to it.

6.2.1. Upper toolbar

The upper toolbar contains the following elements:

● Security Status Area on the left side of the toolbar, informs you if there are any issues affecting your computer's security and helps you fix them.

The color of the security status area changes depending on the detected issues and different messages are displayed:

▶ The area is colored green. There are no issues to fix. Your computer and data are protected.

▶ The area is colored yellow. Non-critical issues are affecting the security of your system. You should check and fix them when you have the time.

▶ The area is colored red. Critical issues are affecting the security of your system. You should address these issues immediately.

By clicking View Issues in the center of the toolbar or anywhere in the security status area to its left, you can access a wizard that will help you easily remove any threats from your computer. For detailed information, please refer to

● Events allows you to access a detailed history of relevant events that occurred in the activity of the product. For detailed information, please refer to

“Events”

(p. 14) .

● Settings allows you to access the settings window from where you can configure the product settings. For detailed information, please refer to

“Settings Overview

window” (p. 26)

Bitdefender interface 23

Bitdefender Antivirus Plus 2013

● Autopilot / User Mode allows you to engage the Autopilot and enjoy completely silent security. For detailed information, please refer to

“Autopilot” (p. 15)

6.2.2. Panels area

The panels area is where you can directly manage the Bitdefender modules.

To browse through the panels, use the slider below the panels area or the arrows located to the right and to the left.

Each module panel contains the following elements:

● The name of the module and a status message.

● An icon is available on the upper-right corner of most panels. Clicking it takes you directly to that modules' advanced settings window.

● The icon of the module.

If there are any events related to a module's activity that you have not read yet, an event counter will be displayed next to the module icon. For example, if there is one unread event related to the activity of the Update module, the icon appears on the Update panel. Click the counter to go directly to that module's

Events window.

● A button that lets you perform important tasks related to the module.

● A switch is available on certain panels allowing you to turn on or off an important feature of the module.

You can organize the panels as you wish, by following these steps:

1. Click on the left side of the slider below the panels to open the Modules

Overview window.

2. Drag individual module panels and drop them in other slots to rearrange the area according to your needs.

3. Click to return to the main window.

The panels available in this area are:

Antivirus

Antivirus protection is the foundation of your security. Bitdefender protects you in real-time and on-demand against all sorts of malware, such as viruses, trojans, spyware, adware, etc.

From the Antivirus panel you can easily access important scan tasks. Click Scan

Now and select a task from the drop-down menu:

● Quick Scan

● Full System Scan

● Custom Scan

Bitdefender interface 24

Bitdefender Antivirus Plus 2013

● Vulnerability Scan

● Rescue Mode

The Autoscan switch allows you to turn the Autoscan feature on or off.

For more information about scan tasks and how to configure antivirus protection, please refer to

“Antivirus protection” (p. 55) .

Privacy

The privacy control module helps you keep important personal data private. It protects you while on the Internet against phishing attacks, fraud attempts, private data leaks, and more.

● File Shredder - starts a wizard that will allow you to delete files permanently.

The Antiphishing switch allows you to turn on or off antiphishing protection.

For more information about how to configure Bitdefender to protect your privacy, please refer to

“Privacy Control” (p. 79)

Update

In a world where cyber criminals constantly try to come up with new ways to cause harm, it is essential to keep your security solution up to date if you are to stay one step ahead of them.

By default, Bitdefender automatically checks for updates every hour. If you want to turn off automatic updates, use the Auto Update switch on the Update panel.

Warning

This is a critical security issue. We recommend you to disable automatic update for as little time as possible. If Bitdefender is not updated regularly, it will not be able to protect you against the latest threats.

Click the Update Now button on the panel to start an immediate update.

For more information about configuring updates, please refer to

“Keeping

Bitdefender up-to-date” (p. 34)

Safego

To help you stay safe on social networks, you can access Safego, the Bitdefender security solution for social networks, directly from Bitdefender Antivirus Plus

2013.

Click the Manage button on the Safego panel and select a task from the drop-down menu:

● Activate for Facebook through your MyBitdefender account. If Safego has already been activated, you will be able to access statistics regarding its activity by selecting View Reports for Facebook in the menu.

Bitdefender interface 25

Bitdefender Antivirus Plus 2013

● Activate for Twitter through your MyBitdefender account. If Safego has already been activated, you will be able to access statistics regarding its activity by selecting View Reports for Twitter in the menu.

For more information, please refer to

“Safego protection for social networks”

(p. 90)

ID Theft Protection

Bitdefender offers a comprehensive identity theft protection service.

Note

This feature is available only for users in the United States.

Activate the service through your MyBitdefender account by clicking the switch on the ID Theft Protection panel. If the service has already been activated, you will be able to access statistics regarding its activity by clicking the corresponding button.

For more information, please refer to

“ID theft protection” (p. 86) .

6.3. Settings Overview window

The Settings Overview window gives you access to the advanced settings of your product. This is where you can configure Bitdefender in detail.

Select a module to configure its settings or perform security or administrative tasks.

The following list briefly describes each module.

General

Allows you to configure general product settings, such as the settings password,

Game Mode, Laptop Mode, proxy settings and status alerts.

Antivirus

Allows you to configure your protection against malware, detect and fix vulnerabilities of your system, set scan exclusions and manage quarantined files.

Privacy Control

Allows you to prevent data leaks and protect your privacy while you are online.

Configure protection for your web browser, instant messaging software, create data protection rules, and more.

Update

Allows you to configure the update process in detail.

To return to the

main window

, click on the upper-left corner of the window.

Bitdefender interface 26

Bitdefender Antivirus Plus 2013

6.4. Security Widget

Security Widget is the quick and easy way to monitor and control Bitdefender

Antivirus Plus 2013. Adding this small and unintrusive widget to your desktop lets you see critical information and perform key tasks at all times:

● monitor scanning activity in real-time.

● monitor the security status of your system and fix any existing issues.

● view notifications and get access to the latest events reported by Bitdefender.

● one click access to your MyBitdefender account.

● scan files or folders by dragging and dropping one or multiple items over the widget.

Security Widget

The overall security status of your computer is displayed at the center of the widget. The status is indicated by the color and shape of the icon that is displayed in this area.

Critical issues are affecting the security of your system.

They require your immediate attention and must be fixed as soon as possible. Click the status icon to begin fixing the reported issues.

Non-critical issues are affecting the security of your system. You should check and fix them when you have the time. Click the status icon to begin fixing the reported issues.

Your system is protected.

When an on-demand scan task is in progress, this animated icon is displayed.

When issues are reported, click the status icon to launch the Fix Issues wizard.

The button on the left side of the widget gives you direct access to the Firewall settings window, and also doubles up as a real-time graphical representation of firewall activity. When a blue bar appears on this button, it means the firewall module

Bitdefender interface 27

Bitdefender Antivirus Plus 2013 is actively filtering network connections. The taller the blue bar, the more intense is the activity of this module.

Note

Firewall is not available in Bitdefender Antivirus Plus 2013.

The upper side of the widget displays the unread events counter (the number of outstanding events reported by Bitdefender, if any). Click the event counter, for example for one unread event, to open the Events Overview window. For more information, please refer to

“Events” (p. 14) .

The button on the right side of the widget gives you direct access to the Antivirus settings window, and also doubles up as a real-time graphical representation of scanning activity. When a blue bar appears on this button, it indicates ongoing real-time antivirus scanning activity. The taller the blue bar, the more intense is the activity of this module.

The button on the lower side of the widget launches your MyBitdefender account control panel in a web browser window. For more information, please refer to

“MyBitdefender account” (p. 31) .

6.4.1. Scanning files and folders

You can use the Security Widget to quickly scan files and folders. Drag any file or folder you want to be scanned and drop it over the Security Widget.

The

license keys” (p. 29) . If you are using a trial version of Bitdefender, you must register

will appear and guide you through the scanning process.

The scanning options are pre-configured for the best detection results and can not be changed If infected files are detected, Bitdefender will try to disinfect them

(remove the malware code). If disinfection fails, the Antivirus Scan wizard will allow you to specify other actions to be taken on infected files.

6.4.2. Hide / show Security Widget

When you no longer want to see the widget, click .

To restore Security Widget, follow these steps:

1. Right-click the Bitdefender icon in the system tray.

2. Click Show Security Widget in the contextual menu that appears.

Bitdefender interface 28

Bitdefender Antivirus Plus 2013

7. Registering Bitdefender

In order to be protected by Bitdefender, you must register your product with a license key. The license key specifies how long you may use the product. As soon as the license key expires, Bitdefender stops performing its functions and protecting your computer.

You should purchase a license key or renew your license a few days before the current license key expires. For more information, please refer to

“Buying or renewing

it with a license key if you want to continue using it after the trial period ends.

7.1. Entering your license key

If, during the installation, you selected to evaluate the product, you can use it for a 30-day trial period. To continue using Bitdefender after the trial period expires, you must register it with a license key.

A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window. Click this link to open the registration window.

You can see the Bitdefender registration status, the current license key and how many days are left until the license expires.

To register Bitdefender Antivirus Plus 2013:

1. Type the license key in the edit field.

Note

You can find your license key:

● on the CD label.

● on the product registration card.

● in the online purchase e-mail.

If you do not have a Bitdefender license key, click the link provided in the window to open a web page from where you can purchase one.

2. Click Register Now.

Even after you purchase a license key, until the in-product registration with the key is completed, Bitdefender Antivirus Plus 2013 will continue to appear as a trial version.

7.2. Buying or renewing license keys

If the trial period is going to end soon, you must purchase a license key and register your product. Similarly, if your current license key is going to expire soon, you must renew your license.

Registering Bitdefender 29

Bitdefender Antivirus Plus 2013

Bitdefender will alert you when the expiration date of your current license is approaching. Follow the instructions in the alert to purchase a new license.

You can visit a web page from where a license key can be purchased at any time, by following these steps:

1. Open the

2. Click the link that indicates the number of days left on your license, located at the bottom of the Bitdefender window, to open the product registration window.

3. Click Don't have a license key? Buy one now!

4. A web page will open on your web browser where you can purchase a Bitdefender license key.

Registering Bitdefender 30

Bitdefender Antivirus Plus 2013

8. MyBitdefender account

The online features of your product and additional Bitdefender services are available exclusively through MyBitdefender. You must link your computer to MyBitdefender by logging in to an account from Bitdefender Antivirus Plus 2013 in order to do any of the following:

● Recover your license key, should you ever lose it.

● Get protection for your Facebook and Twitter accounts with

Safego

● Manage Bitdefender Antivirus Plus 2013

remotely .

Multiple Bitdefender security solutions for PCs as well as other platforms integrate with MyBitdefender. You can manage the security of all the devices linked to your account from a single centralized dashboard.

Your MyBitdefender account can be accessed from any device connected to the

Internet at https://my.bitdefender.com

You can also access and manage your account directly from your product:

1. Open the

2. Click MyBitdefender at the top of the window and select an option from the drop-down menu:

● Account Settings

● Dashboard

Launch the MyBitdefender dashboard in your browser.

8.1. Linking your computer to MyBitdefender

To link your computer to a MyBitdefender account, you must log in to an account from Bitdefender Antivirus Plus 2013. Until you link your computer to MyBitdefender, you will be prompted to log in to MyBitdefender every time you want to use a feature that requires an account.

To open the MyBitdefender window from which you can create or log in to an account, follow these steps:

1. Open the

“How do I configure Bitdefender to

2. Click MyBitdefender at the top of the window and then select Account settings from the drop-down menu.

If you have already logged in to an account, the account you are logged in to is displayed. Click Go to MyBitdefender to go to your dashboard. To change the account linked to the computer, select to log in to another account.

MyBitdefender account 31

Bitdefender Antivirus Plus 2013

If you have not logged in to an account, proceed according to your situation.

I want to create a MyBitdefender account

To successfully create a MyBitdefender account, follow these steps:

1. Select Create a new account.

A new window will appear.

2. Type the required information in the corresponding fields. The data you provide here will remain confidential.

● Email - enter your e-mail address.

● User name - enter a user name for your account.

● Password - enter a password for your account. The password must be at least

6 characters long.

● Confirm password - retype the password.

3. Click Create.

4. Before being able to use your account, you must complete the registration. Check your e-mail and follow the instructions in the confirmation e-mail sent by

Bitdefender.

I want to log in using my Facebook or Google account

To log in with your Facebook or Google account, follow these steps:

1. Click the icon of the service you want to use to log in. You will be redirected to the login page of that service.

2. Follow the instructions provided by the selected service to link your account to

Bitdefender.

Note

Bitdefender does not get access to any confidential information such as the password of the account you use to log in, or the personal information of your friends and contacts.

I already have a MyBitdefender account

If you already have an account but you have not logged in to it yet, follow these steps to log in:

1. Type the e-mail address and the password of your account in the corresponding fields.

MyBitdefender account 32

Bitdefender Antivirus Plus 2013

Note

If you have forgotten your password, click Forgot password and follow the instructions to retrieve it.

2. Click Login to MyBitdefender.

Once the computer is linked to an account, you can use the provided e-mail address and password to log in at https://my.bitdefender.com

You can also access your account directly from Bitdefender Antivirus Plus 2013 using the drop-down menu at the top of the window.

MyBitdefender account 33

Bitdefender Antivirus Plus 2013

9. Keeping Bitdefender up-to-date

New malware is found and identified every day. This is why it is very important to keep Bitdefender up to date with the latest malware signatures.

If you are connected to the Internet through broadband or DSL, Bitdefender takes care of this itself. By default, it checks for updates when you turn on your computer and every hour after that. If an update is detected, it is automatically downloaded and installed on your computer.

The update process is performed on the fly, meaning that the files to be updated are replaced progressively. In this way, the update process will not affect product operation and, at the same time, any vulnerability will be excluded.

Important

To be protected against the latest threats keep Automatic Update turned on.

In some particular situations, your intervention is required in order to keep your

Bitdefender protection up-to-date:

● If your computer connects to the Internet through a proxy server, you must configure the proxy settings as described in

use a proxy Internet connection?” (p. 49) .

● If you do not have Internet connection, you can update Bitdefender manually as described in

“My computer is not connected to the Internet. How do I update

Bitdefender?” (p. 99) . The manual update file is released once a week.

● Errors may occur while downloading updates on a slow Internet connection. To find out how to overcome such errors, please refer to

“How to update Bitdefender

on a slow Internet connection” (p. 98)

● If you are connected to the Internet through a dial-up connection, then it is recommended to regularly update Bitdefender by user request. For more information, please refer to

“Performing an update” (p. 35) .

9.1. Checking if Bitdefender is up-to-date

To check if your Bitdefender protection is up-to-date, follow these steps:

1. Open the

2. On the Update panel, look for the time of the last update just under the panel's name.

For detailed information about the latest updates, check the update events:

1. In the main window, click Events on the upper toolbar.

2. In the Events Overview window, click Update.

Keeping Bitdefender up-to-date 34

Bitdefender Antivirus Plus 2013

You can find out when updates were initiated and information about them (whether they were successful or not, if they require a restart to complete the installation).

If required, restart the system at your earliest convenience.

9.2. Performing an update

In order to perform updates, an Internet connection is required.

To start an update, do any of the following:

● Open the Bitdefender window and click Update now on the Update panel.

● Right-click the Bitdefender icon in the

and select Update now.

The Update module will connect to the Bitdefender update server and it will check for updates. If an update is detected, you will be asked to confirm it or the update will be performed automatically, depending on the

update settings .

Important

It may be necessary to restart the computer when you have completed the update.

We recommend doing it as soon as possible.

9.3. Turning on or off automatic update

To turn on or off automatic update, follow these steps:

1. Open the

2. On the Update panel, click the Auto Update switch.

3. A warning window will appear. You must confirm your choice by selecting from the menu how long you want the automatic update to be disabled. You can disable the automatic update for 5, 15 or 30 minutes, for an hour, permanently or until the system restart.

Warning

9.4. Adjusting update settings

The updates can be performed from the local network, over the Internet, directly or through a proxy server. By default, Bitdefender will check for updates every hour, over the Internet, and install the available updates without alerting you.

The default update settings are suited for most users and you do not normally need to change them.

To adjust the update settings, follow these steps:

Keeping Bitdefender up-to-date 35

Bitdefender Antivirus Plus 2013

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Update.

4. In the Update Settings window, adjust the settings according to your preferences.

Update location

Bitdefender is configured to update from the Bitdefender update servers on the

Internet. The update location is a generic Internet address that is automatically redirected to the closest Bitdefender update server in your region.

Do not change the update location unless advised by a Bitdefender representative or by your network administrator (if you are connected to an office network).

You can switch back to the generic Internet update location by clicking Default.

Update processing rules

You can choose between three ways to download and install updates:

● Silent update - Bitdefender automatically downloads and implements the update.

● Prompt before downloading - every time an update is available, you will be prompted before downloading it.

● Prompt before installing - every time an update was downloaded, you will be prompted before installing it.

Some updates require a restart to complete the installation. By default, if an update requires a restart, Bitdefender will keep working with the old files until the user voluntarily restarts the computer. This is to prevent the Bitdefender update process from interfering with the user's work.

If you want to be prompted when an update requires a restart, turn off the Postpone

reboot option by clicking the corresponding switch.

Keeping Bitdefender up-to-date 36

Bitdefender Antivirus Plus 2013

How to

Bitdefender Antivirus Plus 2013

10. Installation

10.1. How do I install Bitdefender on a second computer?

If you have purchased a license key for more than one computer, you can use the same license key to register a second PC.

To install Bitdefender correctly on a second computer, follow these steps:

1. Install Bitdefender from the CD/ DVD or using the installer provided in the online purchase e-mail and follow the same installation steps.

2. When the registration window appears, enter the license key and click Register

Now.

3. At the next step, you have the option to log in to your MyBitdefender account or create a new MyBitdefender account.

You can also choose to create a MyBitdefender account later on.

4. Wait until the installation process is completed and close the window.

10.2. When should I reinstall Bitdefender?

In some situations, you may need to reinstall your Bitdefender product.

Typical situations when you would need to reinstall Bitdefender include the following:

● you have reinstalled the operating system

● you have purchased a new computer

● you want to change the display language of the Bitdefender interface

To reinstall Bitdefender you can use the installation disc you purchased or download a new version from the Bitdefender website .

During the installation, you will be asked to register the product with your license key.

If you cannot find your license key, you can log in to https://my.bitdefender.com

to retrieve it. Type the e-mail address and the password of your account in the corresponding fields.

10.3. How do I switch from one Bitdefender 2013 product to another?

You can easily switch from one Bitdefender 2013 product to another.

The three Bitdefender 2013 products you can install on your system are:

● Bitdefender Antivirus Plus 2013

Installation 38

Bitdefender Antivirus Plus 2013

● Bitdefender Internet Security 2013

● Bitdefender Total Security 2013

If you want to install another Bitdefender 2013 product on your system than the one you purchased, follow these steps:

1. Open the

2. A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window. Click this link to open the registration window.

3. Enter the license key and click Register Now.

4. Bitdefender will inform you that the license key is for a different product and will give you the option to install it. Click the corresponding link and follow the procedure to perform the installation.

10.4. How do I remove Bitdefender?

If you want to repair or remove Bitdefender Antivirus Plus 2013, follow the path from the Windows start menu: Start → All Programs → Bitdefender 2013 →

Repair or Uninstall.

Select the action you want to perform:

● Repair - to re-install all program components.

● Remove - to remove all installed components. You must confirm your choice by selecting Uninstall in the following screen.

Note

We recommend that you choose Remove for a clean re-installation.

Wait for Bitdefender to complete the action you have selected. This will take several minutes.

You will need to restart the computer to complete the process.

Installation 39

Bitdefender Antivirus Plus 2013

11. Registration

11.1. What Bitdefender product am I using?

To find out which Bitdefender program you have installed, follow these steps:

1. Open the

2. At the top of the window you should see one of the following:

● Bitdefender Antivirus Plus 2013

● Bitdefender Internet Security 2013

● Bitdefender Total Security 2013

11.2. How do I register a trial version?

If you have installed a trial version, you may only use it for a limited period of time.

To continue using Bitdefender after the trial period expires, you must register your product with a license key.

To register Bitdefender, follow these steps:

1. Open the

2. A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window. Click this link to open the registration window.

3. Enter the license key and click Register Now.

If you do not have a license key, click the link provided in the window to visit a web page from where you can purchase one.

4. Wait until the registration process is completed and close the window.

11.3. When does my Bitdefender protection expire?

To find out the remaining number of days from your license key, follow these steps:

1. Open the

2. A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window.

3. For additional information, click the link to open the registration window.

4. In the Register Your Product window, you can:

● See the current license key

● Register with another license key

● Purchase a license key

Registration 40

Bitdefender Antivirus Plus 2013

11.4. How do I register Bitdefender without an Internet connection?

If you just purchased Bitdefender and you do not have an Internet connection, you can still register Bitdefender offline.

To register Bitdefender with your license key, follow these steps:

1. Go to a PC connected to the Internet. For example, you can use a friend's computer or a PC from a public location.

2. Go to https://my.bitdefender.com

to create a MyBitdefender account.

3. Log in to your account.

4. Click your user name at the top and select Products from the drop-down menu.

5. Click Offline registration.

6. Enter the license key you purchased.

7. Click Submit to obtain an authorization code.

Important

Write down the authorization code.

8. Go back to your PC with the authorization code.

9. Open the

10. A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window. Click this link to open the registration window.

11. Enter the authorization code in the corresponding field and click Register Now.

12. Wait until the registration process is completed.

11.5. How do I renew my Bitdefender protection?

When your Bitdefender protection is about to expire, you must renew your license key.

● Follow these steps to visit a website where you can renew your Bitdefender license key:

1. Open the

2. A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window. Click this link to open the registration window.

3. Click Don't have a license key? Buy one now!

Registration 41

Bitdefender Antivirus Plus 2013

4. A web page will open on your web browser where you can purchase a

Bitdefender license key.

Note

As an alternative, you can contact the retailer you bought your Bitdefender product from.

● Follow these steps to register your Bitdefender with the new license key:

1. Open the

2. A link that indicates the number of days left on your license appears at the bottom of the Bitdefender window. Click this link to open the registration window.

3. Enter the license key and click Register Now.

4. Wait until the registration process is completed and close the window.

For more information, you can contact Bitdefender for support as described in section

Registration 42

Bitdefender Antivirus Plus 2013

12. Scanning with Bitdefender

12.1. How do I scan a file or a folder?

The easiest and recommended way to scan a file or folder is to right-click the object you want to scan, point to Bitdefender and select Scan with Bitdefender from the menu. To complete the scan, follow the Antivirus Scan wizard. Bitdefender will automatically take the recommended actions on detected files.

If there remain unresolved threats, you will be prompted to choose the actions to be taken on them.

Typical situations when you would use this scanning method include the following:

● You suspect a specific file or folder to be infected.

● Whenever you download from the Internet files that you think they might be dangerous.

● Scan a network share before copying files to your computer.

12.2. How do I scan my system?

To perform a full scan on the system, follow these steps:

1. Open the

“Antivirus Scan Wizard” (p. 65)

2. On the Antivirus panel, click Scan Now and select System Scan from the drop-down menu.

3. Follow the Antivirus Scan wizard to complete the scan. Bitdefender will automatically take the recommended actions on detected files. If there remain unresolved threats, you will be prompted to choose the actions to be taken on them. For more information, please refer to

12.3. How do I create a custom scan task?

If you want to scan specific locations on your computer or to configure the scanning options, configure and run a Custom Scan.

To create a customized scan task, proceed as follows:

1. Open the

2. On the Antivirus panel, click Scan Now and select Custom Scan from the drop-down menu.

3. Click Add Target to select the files or folders to be scanned.

4. If you want to configure the scanning options in detail, click Scan Options.

Scanning with Bitdefender 43

Bitdefender Antivirus Plus 2013

You can easily configure the scanning options by adjusting the scan level. Drag the slider along the scale to set the desired scan level.

You can also choose to shutdown the computer when the scan is over if no threats are found. Remember that this will be the default behavior every time you run this task.

5. Click Start Scan and follow the

to complete the scan. At the end of the scan, you will be prompted to choose the actions to be taken on the detected files, if any.

6. If you want to save the scan task for future use, open the custom scan configuration window again.

7. Locate the scan you have just run in the Recent scans list.

8. Go with the mouse cursor over the name of the scan and click the icon to add the scan to the Favorite Scans list.

9. Enter a suggestive name for the scan.

12.4. How do I exclude a folder from being scanned?

Bitdefender allows excluding specific files, folders or file extensions from scanning.

Exclusions are to be used by users having advanced computer knowledge and only in the following situations:

● You have a large folder on your system where you keep movies and music.

● You have a large archive on your system where you keep different data.

● You keep a folder where you install different types of software and applications for testing purposes. Scanning the folder may result in losing some of the data.

To add the folder to the Exclusions list, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab.

5. Make sure Exclusions for files is turned on by clicking the switch.

6. Click the Excluded files and folders link.

7. Click the Add button, located at the top of the exclusions table.

8. Click Browse, select the folder that you want to be excluded from scanning and then click OK.

9. Click Add and then click OK to save the changes and close the window.

Scanning with Bitdefender 44

Bitdefender Antivirus Plus 2013

12.5. What to do when Bitdefender detected a clean file as infected?

There are cases when Bitdefender mistakenly flags a legitimate file as being a threat

(a false positive). To correct this error, add the file to the Bitdefender Exclusions area:

1. Turn off the Bitdefender real-time antivirus protection: a. Open the

“How do I display hidden objects in Windows?” (p. 51) .

b. Click the Settings button on the upper toolbar.

c. In the Settings Overview window, select Antivirus.

d. In the Antivirus Settings window, select the Shield tab.

e. Click the switch to turn off on-access scanning.

2. Display hidden objects in Windows. To find out how to do this, please refer to

3. Restore the file from the Quarantine area: a. Open the

do I exclude a folder from being scanned?” (p. 44)

b. Click the Settings button on the upper toolbar.

c. In the Settings Overview window, select Antivirus.

d. In the Antivirus Settings window, select the Quarantine tab.

e. Select the file and click Restore.

4. Add the file to the Exclusions list. To find out how to do this, please refer to

“How

5. Turn on the Bitdefender real-time antivirus protection.

6. Contact our support representatives so that we may remove the detection signature. To find out how to do this, please refer to

“Asking for help” (p. 111) .

12.6. How do I check what viruses Bitdefender detected?

Each time a scan is performed, a scan log is created and Bitdefender records the detected issues.

The scan log contains detailed information about the logged scanning process, such as scanning options, the scanning target, the threats found and the actions taken on these threats.

You can open the scan log directly from the scan wizard, once the scan is completed, by clicking Show Log.

To check a scan log or any detected infection at a later time, follow these steps:

Scanning with Bitdefender 45

Bitdefender Antivirus Plus 2013

1. Open the

2. Click the Events button on the upper toolbar.

3. In the Events Overview window, select Antivirus.

4. In the Antivirus Events window, select the Virus Scan tab. This is where you can find all malware scan events, including threats detected by on-access scanning, user-initiated scans and status changes for automatic scans.

5. In the events list, you can check what scans have been performed recently. Click an event to view details about it.

6. To open a scan log, click View log. The scan log will open in a new window.

Scanning with Bitdefender 46

Bitdefender Antivirus Plus 2013

13. Privacy Control

13.1. How do I make sure my online transaction is secure?

To make sure your online operations remain private, you can use the browser provided by Bitdefender to protect your transactions and home banking applications.

Bitdefender Safepay is a secured browser designed to protect your credit card information, account number or any other sensitive data you may enter while accessing different online locations.

To keep your online activity secure and private, follow these steps:

1. Double-click the Bitdefender Safepay icon on your desktop.

Bitdefender Safepay browser will appear.

2. Click the button to access the Virtual Keyboard.

3. Use the Virtual Keyboard when typing sensitive information such as your passwords.

13.2. How do I protect my Facebook account?

Safego is a Facebook application developed by Bitdefender to keep your social networking account safe.

Its role is to scan the links you receive from your Facebook friends and monitor your account privacy settings.

To access Safego from your Bitdefender product, follow these steps:

1. Open the

2. On the Safego panel, click Manage and select Activate for Facebook from the drop-down menu. You will be directed to your account.

If you already activated Safego for Facebook, you will be able to access statistics regarding its activity by clicking the View Reports for Facebook button.

3. Use your Facebook login information to connect to the Safego application.

4. Allow Safego access to your Facebook account.

13.3. How do I remove a file permanently with Bitdefender?

If you want to remove a file permanently from your system, you need to delete the data physically from your hard disk.

The Bitdefender File Shredder will help you to quickly shred files or folders from your computer using the Windows contextual menu, by following these steps:

Privacy Control 47

Bitdefender Antivirus Plus 2013

1. Right-click the file or folder you want to permanently delete, point to Bitdefender and select File Shredder.

2. A confirmation window will appear. Click Yes to start the File Shredder wizard.

3. Wait for Bitdefender to finish shredding the files.

4. The results are displayed. Click Close to exit the wizard.

Privacy Control 48

Bitdefender Antivirus Plus 2013

14. Useful Information

14.1. How do I automatically shut down the computer after the scan is over?

Bitdefender offers multiple scan tasks that you can use to make sure your system is not infected with malware. Scanning the entire computer may take longer time to complete depending on your system's hardware and software configuration.

For this reason, Bitdefender allows you to configure Bitdefender to shut down your system as soon as the scan is over.

Consider this example: you have finished your work at the computer and you want to go to sleep. You would like to have your entire system checked for malware by

Bitdefender.

This is how you set up Bitdefender to shut down your system at the end of the scan:

1. Open the

“Antivirus Scan Wizard”

2. On the Antivirus panel, click Scan Now and select Custom Scan from the drop-down menu.

3. Click Add Target to select the files or folders to be scanned.

4. If you want to configure the scanning options in detail, click Scan Options.

5. Choose to shutdown the computer when the scan is over if no threats are found.

6. Click Start Scan.

If no threats are found, the computer will shut down.

If there remain unresolved threats, you will be prompted to choose the actions to be taken on them. For more information, please refer to

(p. 65)

14.2. How do I configure Bitdefender to use a proxy Internet connection?

If your computer connects to the Internet through a proxy server, you must configure

Bitdefender with the proxy settings. Normally, Bitdefender automatically detects and imports the proxy settings from your system.

Important

Home Internet connections do not normally use a proxy server. As a rule of thumb, check and configure the proxy connection settings of your Bitdefender program when updates are not working. If Bitdefender can update, then it is properly configured to connect to the Internet.

Useful Information 49

Bitdefender Antivirus Plus 2013

To manage the proxy settings, follow these steps:

1. Open the

“Automatic scan of removable media” (p. 69) .

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select General.

4. In the General Settings window, select the Advanced tab.

5. Turn on proxy usage by clicking the switch.

6. Click the Manage proxies link.

7. There are two options to set the proxy settings:

● Import proxy settings from default browser - proxy settings of the current user, extracted from the default browser. If the proxy server requires a username and a password, you must specify them in the corresponding fields.

Note

Bitdefender can import proxy settings from the most popular browsers, including the latest versions of Internet Explorer, Mozilla Firefox and Opera.

● Custom proxy settings - proxy settings that you can configure yourself. The following settings must be specified:

▶ Address - type in the IP of the proxy server.

▶ Port - type in the port Bitdefender uses to connect to the proxy server.

▶ User name - type in a user name recognized by the proxy.

▶ Password - type in the valid password of the previously specified user.

8. Click OK to save the changes and close the window.

Bitdefender will use the available proxy settings until it manages to connect to the

Internet.

14.3. Am I using a 32 bit or a 64 bit version of Windows?

To find out if you have a 32 bit or a 64 bit operating system, follow these steps:

● For Windows XP:

1. Click Start.

2. Locate My Computer on the Start menu.

3. Right-click My Computer and select Properties.

4. If you see x64 Edition listed under System, you are running the 64 bit version of Windows XP.

If you do not see x64 Edition listed, you are running a 32 bit version of

Windows XP.

Useful Information 50

Bitdefender Antivirus Plus 2013

● For Windows Vista and Windows 7:

1. Click Start.

2. Locate Computer on the Start menu.

3. Right-click Computer and select Properties.

4. Look under System in order to check the information about your system.

14.4. How do I display hidden objects in Windows?

These steps are useful in those cases where you are dealing with a malware situation and you need to find and remove the infected files, which could be hidden.

Follow these steps to display hidden objects in Windows:

1. Click Start, go to Control Panel and select Folder Options.

2. Go to View tab.

3. Select Display contents of system folders (for Windows XP only).

4. Select Show hidden files and folders.

5. Clear Hide file extensions for known file types.

6. Clear Hide protected operating system files.

7. Click Apply and then OK.

14.5. How do I remove other security solutions?

The main reason for using a security solution is to provide protection and safety for your data. But what happens when you have more than one security product on the same system?

When you use more than one security solution on the same computer, the system becomes unstable. The Bitdefender Antivirus Plus 2013 installer automatically detects other security programs and offers you the option to uninstall them.

If you did not remove the other security solutions during the initial installation, follow these steps:

● For Windows XP:

1. Click Start, go to Control Panel and double-click Add / Remove programs.

2. Wait a few moments until the list of installed software is displayed.

3. Find the name of the program you want to remove and select Remove.

4. Wait for the uninstall process to complete, then reboot your system.

● For Windows Vista and Windows 7:

1. Click Start, go to Control Panel and double-click Programs and Features.

Useful Information 51

Bitdefender Antivirus Plus 2013

2. Wait a few moments until the installed software list is displayed.

3. Find the name of the program you want to remove and select Uninstall.

4. Wait for the uninstall process to complete, then reboot your system.

If you fail to remove the other security solution from your system, get the uninstall tool from the vendor website or contact them directly in order to provide you with the uninstall guidelines.

14.6. How do I use System Restore in Windows?

If you cannot start the computer in normal mode, you can boot up in Safe Mode and use System Restore to restore to a time when you could start the computer without errors.

To perform the System Restore, you must be logged on to Windows as an administrator.

To use System Restore, follow these steps:

● In Windows XP:

1. Log on to Windows in Safe Mode.

2. Follow the path from the Windows start menu: Start → All Programs → System

Tools → System Restore.

3. On the Welcome to System Restore page, click to select the Restore my

computer to an earlier time option, and then click Next.

4. Follow the wizard steps and you should be able to boot up the system in normal mode.

● In Windows Vista and Windows 7:

1. Log on to Windows in Safe Mode.

2. Follow the path from the Windows start menu: All Programs → Accessories

→ System Tools → System Restore.

3. Follow the wizard steps and you should be able to boot up the system in normal mode.

14.7. How do I restart in Safe Mode?

Safe mode is a diagnostic operating mode, used mainly to troubleshoot problems affecting normal operation of Windows. Such problems range from conflicting drivers to viruses preventing Windows from starting normally. In Safe Mode only a few applications work and Windows loads just the basic drivers and a minimum of operating system components. This is why most viruses are inactive when using

Windows in Safe Mode and they can be easily removed.

Useful Information 52

Bitdefender Antivirus Plus 2013

To start Windows in Safe Mode:

1. Restart the computer.

2. Press the F8 key several times before Windows starts in order to access the boot menu.

3. Select Safe Mode in the boot menu or Safe Mode with Networking if you want to have Internet access.

4. Press Enter and wait while Windows loads in Safe Mode.

5. This process ends with a confirmation message. Click OK to acknowledge.

6. To start Windows normally, simply reboot the system.

Useful Information 53

Bitdefender Antivirus Plus 2013

Managing your security

Bitdefender Antivirus Plus 2013

15. Antivirus protection

Bitdefender protects your computer from all kinds of malware (viruses, Trojans, spyware, rootkits and so on). The protection Bitdefender offers is divided into two categories:

● On-access scanning

- prevents new malware threats from entering your system.

Bitdefender will, for example, scan a word document for known threats when you open it, and an e-mail message when you receive one.

On-access scanning ensures real-time protection against malware, being an essential component of any computer security program.

Important

To prevent viruses from infecting your computer keep on-access scanning enabled.

● On-demand scanning

- allows detecting and removing the malware that already resides in the system. This is the classic scan initiated by the user - you choose what drive, folder or file Bitdefender should scan, and Bitdefender scans it on-demand.

With

Autoscan

turned on, there is hardly any need to manually run scans for malware. Autoscan will scan your computer over and over again, taking appropriate actions when malware is detected. Autoscan runs only when enough system resources are available so as not to slow down the computer.

Bitdefender automatically scans any removable media that is connected to the computer to make sure it can be safely accessed. For more information, please refer to

Advanced users can configure scan exclusions if they do not want specific files or file types to be scanned. For more information, please refer to

“Configuring scan

exclusions” (p. 70)

When it detects a virus or other malware, Bitdefender will automatically attempt to remove the malware code from the infected file and reconstruct the original file.

This operation is referred to as disinfection. Files that cannot be disinfected are moved to quarantine in order to contain the infection. For more information, please refer to

“Managing quarantined files” (p. 72) .

If your computer has been infected with malware, please refer to

“Removing malware

from your system” (p. 102) . To help you clean your computer of malware that cannot

be removed from within the Windows operating system, Bitdefender provides you with

Rescue Mode

. This is a trusted environment, especially designed for malware removal, which enables you to boot your computer independent of Windows. When the computer runs in Rescue Mode, Windows malware is inactive, making it easy to remove.

Antivirus protection 55

Bitdefender Antivirus Plus 2013

To protect you against unknown malicious applications, Bitdefender uses Active

Virus Control, an advanced heuristic technology, which continuously monitors the applications running on your system. Active Virus Control automatically blocks applications that exhibit malware-like behavior to stop them from damaging your computer. Occasionally, legitimate applications may be blocked. In such situations, you can configure Active Virus Control not to block those applications again by creating exclusion rules. To learn more, please refer to

“Active Virus Control” (p.

73)

Many forms of malware are designed to infect systems by exploiting their vulnerabilities, such as missing operating system updates or outdated applications.

Bitdefender helps you easily identify and fix system vulnerabilities in order to make your computer more secure against malware and hackers. For more information, please refer to

“Fixing system vulnerabilities” (p. 75) .

15.1. On-access scanning (real-time protection)

Bitdefender provides continuous, real-time protection against a wide range of malware threats by scanning all accessed files, e-mail messages and the communications through Instant Messaging Software applications (ICQ, NetMeeting,

Yahoo Messenger, MSN Messenger).

The default real-time protection settings ensure good protection against malware, with minor impact on system performance. You can easily change the real-time protection settings according to your needs by switching to one of the predefined protection levels. Or, if you are an advanced user, you can configure the scan settings in detail by creating a custom protection level.

15.1.1. Turning on or off real-time protection

To turn on or off real-time protection against malware, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Shield tab.

5. Click the switch to turn on or off on-access scanning.

6. If you want to disable real-time protection, a warning window will appear. You must confirm your choice by selecting from the menu how long you want the real-time protection to be disabled. You can disable real-time protection for 5,

15 or 30 minutes, for an hour, permanently or until the system restart.

Antivirus protection 56

Bitdefender Antivirus Plus 2013

Warning

This is a critical security issue. We recommend you to disable real-time protection for as little time as possible. If real-time protection is disabled, you will not be protected against malware threats.

15.1.2. Adjusting the real-time protection level

The real-time protection level defines the scan settings for real-time protection. You can easily change the real-time protection settings according to your needs by switching to one of the predefined protection levels.

To adjust the real-time protection level, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Shield tab.

5. Drag the slider along the scale to set the desired protection level. Use the description on the right side of the scale to choose the protection level that better fits your security needs.

15.1.3. Configuring the real time protection settings

Advanced users might want to take advantage of the scan settings Bitdefender offers. You can configure the real-time protection settings in detail by creating a custom protection level.

To configure the real time protection settings, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Shield tab.

5. Click Custom.

6. Configure the scan settings as needed.

7. Click OK to save the changes and close the window.

Information on the scan options

You may find this information useful:

● If you are not familiar with some of the terms, check them in the

glossary . You

can also find useful information by searching the Internet.

Antivirus protection 57

Bitdefender Antivirus Plus 2013

● Scan options for accessed files. You can set Bitdefender to scan all accessed files or applications (program files) only. Scanning all accessed files provides best protection, while scanning applications only can be used for better system performance.

By default, both local folders and network shares are subject to on-access scanning. For better system performance, you can exclude network locations from on-access scanning.

Applications (or program files) are far more vulnerable to malware attacks than other types of files. This category includes the following file extensions:

386; a6p; ac; accda; accdb; accdc; accde; accdp; accdr; accdt; accdu; acl; acr; action; ade; adp; air; app; as; asd; asp; awk; bas; bat; bin; cgi; chm; cla; class; cmd; cnv; com; cpl; csc; csh; dat; dek; dld; dll; doc; docm; docx; dot; dotm; dotx; drv; ds; ebm; esh; exe; ezs; fky; frs; fxp; gadget; grv; hlp; hms; hta; htm; html; iaf; icd; ini; inx; ipf; isu; jar; js; jse; jsx; kix; laccdb; lnk; maf; mam; maq; mar; mat; mcr; mda; mdb; mde; mdt; mdw; mem; mhtml; mpp; mpt; mpx; ms; msg; msi; msp; mst; msu; oab; obi; obs; ocx; oft; ole; one; onepkg; ost; ovl; pa; paf; pex; pfd; php; pif; pip; pot; potm; potx; ppa; ppam; pps; ppsm; ppsx; ppt; pptm; pptx; prc; prf; prg; pst; pub; puz; pvd; pwc; py; pyc; pyo; qpx; rbx; rgs; rox; rpj; rtf; scar; scr; script; sct; shb; shs; sldm; sldx; smm; snp; spr; svd; sys; thmx; tlb; tms; u3p; udf; url; vb; vbe; vbs; vbscript; vxd; wbk; wcm; wdm; wiz; wll; wpk; ws; wsf; xar; xl; xla; xlam; xlb; xlc; xll; xlm; xls; xlsb; xlsm; xlsx; xlt; xltm; xltx; xlw; xml; xqt; xsf; xsn; xtp

● Scan inside archives. Scanning inside archives is a slow and resource-intensive process, which is therefore not recommended for real-time protection. Archives containing infected files are not an immediate threat to the security of your system. The malware can affect your system only if the infected file is extracted from the archive and executed without having real-time protection enabled.

If you decide on using this option, you can set a maximum accepted size limit of archives to be scanned on-access. Select the corresponding check box and type the maximum archive size (in MB).

● Scan options for e-mail, web and instant messaging traffic. To prevent malware from being downloaded to your computer, Bitdefender automatically scans the following malware entry points:

▶ incoming and outgoing e-mails

▶ web traffic

▶ files received via Yahoo! Messenger

Scanning the web traffic may slow down web browsing a little, but it will block malware coming from the Internet, including drive-by downloads.

Antivirus protection 58

Bitdefender Antivirus Plus 2013

Though not recommended, you can disable e-mail, web or instant messaging antivirus scan to increase system performance. If you disable the corresponding scan options, the e-mails and files received or downloaded from the Internet will not be scanned, thus allowing infected files to be saved to your computer. This is not a major threat because real-time protection will block the malware when the infected files are accessed (opened, moved, copied or executed).

● Scan boot sectors. You can set Bitdefender to scan the boot sectors of your hard disk. This sector of the hard disk contains the necessary computer code to start the boot process. When a virus infects the boot sector, the drive may become inaccessible and you may not be able to start your system and access your data.

● Scan only new and changed files. By scanning only new and changed files, you may greatly improve overall system responsiveness with a minimum trade-off in security.

● Scan for keyloggers. Select this option to scan your system for keylogger applications. Keyloggers record what you type on your keyboard and send reports over the Internet to a malicious person (hacker). The hacker can find out sensitive information from the stolen data, such as bank account numbers and passwords, and use it to gain personal benefits.

Actions taken on detected malware

You can configure the actions taken by the real-time protection.

To configure the actions, follow these steps:

1. Open the

“Managing quarantined files” (p. 72)

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Shield tab.

5. Click Custom.

6. Configure the scan settings as needed.

7. Click OK to save the changes and close the window.

The following actions can be taken by the real time protection in Bitdefender:

Take proper actions

Bitdefender will take the recommended actions depending on the type of detected file:

● Infected files. Files detected as infected match a malware signature in the

Bitdefender Malware Signature Database. Bitdefender will automatically attempt to remove the malware code from the infected file and reconstruct the original file. This operation is referred to as disinfection.

Antivirus protection 59

Bitdefender Antivirus Plus 2013

Files that cannot be disinfected are moved to quarantine in order to contain the infection. Quarantined files cannot be executed or opened; therefore, the risk of getting infected disappears. For more information, please refer to

Important

For particular types of malware, disinfection is not possible because the detected file is entirely malicious. In such cases, the infected file is deleted from the disk.

● Suspicious files. Files are detected as suspicious by the heuristic analysis.

Suspicious files cannot be disinfected, because no disinfection routine is available. They will be moved to quarantine to prevent a potential infection.

By default, quarantined files are automatically sent to Bitdefender Labs in order to be analyzed by the Bitdefender malware researchers. If malware presence is confirmed, a signature is released to allow removing the malware.

● Archives containing infected files.

▶ Archives that contain only infected files are deleted automatically.

▶ If an archive contains both infected and clean files, Bitdefender will attempt to delete the infected files provided it can reconstruct the archive with the clean files. If archive reconstruction is not possible, you will be informed that no action can be taken so as to avoid losing clean files.

Move files to quarantine

Moves detected files to quarantine. Quarantined files cannot be executed or opened; therefore, the risk of getting infected disappears. For more information, please refer to

“Managing quarantined files” (p. 72)

Deny access

In case an infected file is detected, the access to this will be denied.

15.1.4. Restoring the default settings

The default real-time protection settings ensure good protection against malware, with minor impact on system performance.

To restore the default real-time protection settings, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. Click Antivirus on the left-side menu and then the Shield tab.

4. Click Default.

Antivirus protection 60

Bitdefender Antivirus Plus 2013

15.2. On-demand scanning

The main objective for Bitdefender is to keep your computer clean of viruses. This is first and foremost done by keeping new viruses out of your computer and by scanning your e-mail messages and any new files downloaded or copied to your system.

There is a risk that a virus is already lodged in your system, before you even install

Bitdefender. This is why it's a very good idea to scan your computer for resident viruses after you've installed Bitdefender. And it's definitely a good idea to frequently scan your computer for viruses.

On-demand scanning is based on scan tasks. Scan tasks specify the scanning options and the objects to be scanned. You can scan the computer whenever you want by running the default tasks or your own scan tasks (user-defined tasks). If you want to scan specific locations on your computer or to configure the scan options, configure and run a custom scan.

15.2.1. Autoscan

Autoscan is a light on-demand scan that silently scans all your data for malware and takes the appropriate actions for any infections found. Autoscan finds and uses time-slices when system resource usage falls below a certain threshold to perform recurring scans of the entire system.

Benefits of using Autoscan:

● It has close to zero impact on the system.

● By pre-scanning the entire hard-disk, future on-demand tasks will be completed extremely fast.

● On-access scanning will also take significantly less time.

To turn on or off Autoscan, follow these steps:

1. Open the

2. On the Antivirus panel, click the switch to turn on or off Autoscan.

15.2.2. Scanning a file or folder for malware

You should scan files and folders whenever you suspect they might be infected.

Right-click the file or folder you want to be scanned, point to Bitdefender and select Scan with Bitdefender. The

will appear and guide you through the scanning process. At the end of the scan, you will be prompted to choose the actions to be taken on the detected files, if any.

Antivirus protection 61

Bitdefender Antivirus Plus 2013

15.2.3. Running a Quick Scan

Quick Scan uses in-the-cloud scanning to detect malware running in your system.

Running a Quick Scan usually takes less than a minute and uses a fraction of the system resources needed by a regular virus scan.

To run a Quick Scan, follow these steps:

1. Open the

2. On the Antivirus panel, click Scan Now and select Quick Scan from the drop-down menu.

3. Follow the

“Keeping Bitdefender up-to-date” (p. 34) .

to complete the scan. Bitdefender will automatically take the recommended actions on detected files. If there remain unresolved threats, you will be prompted to choose the actions to be taken on them.

15.2.4. Running a System Scan

The System Scan task scans the entire computer for all types of malware threatening its security, such as viruses, spyware, adware, rootkits and others. If you have turned off

Autoscan

, it is recommended to run a System Scan at least once a week.

Note

Because System Scan performs a thorough scan of the entire system, the scan may take a while. Therefore, it is recommended to run this task when you are not using your computer.

Before running a System Scan, the following are recommended:

● Make sure Bitdefender is up-to-date with its malware signatures. Scanning your computer using an outdated signature database may prevent Bitdefender from detecting new malware found since the last update. For more information, please refer to

● Shut down all open programs.

If you want to scan specific locations on your computer or to configure the scanning options, configure and run a custom scan. For more information, please refer to

“Configuring a custom scan” (p. 63) .

To run a System Scan, follow these steps:

1. Open the

2. On the Antivirus panel, click Scan Now and select System Scan from the drop-down menu.

3. Follow the

to complete the scan. Bitdefender will automatically take the recommended actions on detected files. If there remain

Antivirus protection 62

Bitdefender Antivirus Plus 2013 unresolved threats, you will be prompted to choose the actions to be taken on them.

15.2.5. Configuring a custom scan

To configure a scan for malware in detail and then run it, follow these steps:

1. Open the

2. On the Antivirus panel, click Scan Now and select Custom Scan from the drop-down menu.

3. If you want to, you can quickly rerun a previous custom scan by clicking the corresponding entry in the Recent Scans or Favorite Scans list.

4. Click Add Target, select the check boxes corresponding to the locations you want to be scanned for malware and then click OK.

5. Click Scan Options if you want to configure the scan options. A new window will appear. Follow these steps: a. You can easily configure the scanning options by adjusting the scan level. Drag the slider along the scale to set the desired scan level. Use the description on the right side of the scale to identify the scan level that better fits your needs.

Advanced users might want to take advantage of the scan settings Bitdefender offers. To configure the scan options in detail, click Custom. You can find information about them at the end of this section.

b. You can also configure these general options:

● Run the task with low priority. Decreases the priority of the scan process.

You will allow other programs to run faster and increase the time needed for the scan process to finish.

● Minimize Scan Wizard to system tray. Minimizes the scan window to the system tray . Double-click the Bitdefender icon to open it.

● Specify the action to be taken if no threats are found.

c. Click OK to save the changes and close the window.

6. Click Start Scan and follow the

to complete the scan.

Depending on the locations to be scanned, the scan may take a while. At the end of the scan, you will be prompted to choose the actions to be taken on the detected files, if any.

Saving a custom scan to favorites

When you configure and run a custom scan, it is automatically added to a limited list of recent scans. If you plan to reuse a custom scan in the future, you can choose to save it to the favorite scans list.

Antivirus protection 63

Bitdefender Antivirus Plus 2013

To save a recently run custom scan to the favorite scans list, follow these steps:

1. Open the custom scan configuration window.

a. Open the

system tray . You can click this

b. On the Antivirus panel, click Scan Now and select Custom Scan from the drop-down menu.

2. Locate the desired scan in the Recent scans list.

3. Go with the mouse cursor over the name of the scan and click the icon to add the scan to the favorite scans list.

Scans saved to favorites are marked using the icon. If you click this icon, the scan is removed from the favorite scans list.

Information on the scan options

You may find this information useful:

● If you are not familiar with some of the terms, check them in the

glossary . You

can also find useful information by searching the Internet.

● Scan files. You can set Bitdefender to scan all types of files or applications

(program files) only. Scanning all files provides best protection, while scanning applications only can be used to perform a quicker scan.

Applications (or program files) are far more vulnerable to malware attacks than other types of files. This category includes the following file extensions: 386; a6p; ac; accda; accdb; accdc; accde; accdp; accdr; accdt; accdu; acl; acr; action; ade; adp; air; app; as; asd; asp; awk; bas; bat; bin; cgi; chm; cla; class; cmd; cnv; com; cpl; csc; csh; dat; dek; dld; dll; doc; docm; docx; dot; dotm; dotx; drv; ds; ebm; esh; exe; ezs; fky; frs; fxp; gadget; grv; hlp; hms; hta; htm; html; iaf; icd; ini; inx; ipf; isu; jar; js; jse; jsx; kix; laccdb; lnk; maf; mam; maq; mar; mat; mcr; mda; mdb; mde; mdt; mdw; mem; mhtml; mpp; mpt; mpx; ms; msg; msi; msp; mst; msu; oab; obi; obs; ocx; oft; ole; one; onepkg; ost; ovl; pa; paf; pex; pfd; php; pif; pip; pot; potm; potx; ppa; ppam; pps; ppsm; ppsx; ppt; pptm; pptx; prc; prf; prg; pst; pub; puz; pvd; pwc; py; pyc; pyo; qpx; rbx; rgs; rox; rpj; rtf; scar; scr; script; sct; shb; shs; sldm; sldx; smm; snp; spr; svd; sys; thmx; tlb; tms; u3p; udf; url; vb; vbe; vbs; vbscript; vxd; wbk; wcm; wdm; wiz; wll; wpk; ws; wsf; xar; xl; xla; xlam; xlb; xlc; xll; xlm; xls; xlsb; xlsm; xlsx; xlt; xltm; xltx; xlw; xml; xqt; xsf; xsn; xtp

● Scan options for archives.

Archives containing infected files are not an immediate threat to the security of your system. The malware can affect your

Antivirus protection 64

Bitdefender Antivirus Plus 2013 system only if the infected file is extracted from the archive and executed without having real-time protection enabled. However, it is recommended to use this option in order to detect and remove any potential threat, even if it is not an immediate threat.

Note

Scanning archived files increases the overall scanning time and requires more system resources.

● Scan memory. Select this option to scan programs running in your system's memory.

● Scan registry. Select this option to scan registry keys. Windows Registry is a database that stores configuration settings and options for the Windows operating system components, as well as for installed applications.

● Scan cookies. Select this option to scan the cookies stored by browsers on your computer.

● Scan only new and changed files. By scanning only new and changed files, you may greatly improve overall system responsiveness with a minimum trade-off in security.

● Ignore commercial keyloggers. Select this option if you have installed and use commercial keylogger software on your computer. Commercial keyloggers are legitimate computer monitoring software whose most basic function is to record everything that is typed on the keyboard.

● Scan for rootkits. Select this option to scan for

rootkits

and objects hidden using such software.

15.2.6. Antivirus Scan Wizard

Whenever you initiate an on-demand scan (for example, right-click a folder, point to Bitdefender and select Scan with Bitdefender), the Bitdefender Antivirus Scan wizard will appear. Follow the wizard to complete the scanning process.

Note

If the scan wizard does not appear, the scan may be configured to run silently, in the background. Look for the scan progress icon in the

icon to open the scan window and to see the scan progress.

Antivirus protection 65

Bitdefender Antivirus Plus 2013

Step 1 - Perform scan

Bitdefender will start scanning the selected objects. You can see real-time information about the scan status and statistics (including the elapsed time, an estimation of the remaining time and the number of detected threats). To see more details, click the Show more link.

Wait for Bitdefender to finish scanning. The scanning process may take a while, depending on the complexity of the scan.

Stopping or pausing the scan. You can stop scanning anytime you want by clicking Stop&Yes. You will go directly to the last step of the wizard. To temporarily stop the scanning process, just click Pause. You will have to click Resume to resume scanning.

Password-protected archives. When a password-protected archive is detected, depending on the scan settings, you may be prompted to provide the password.

Password-protected archives cannot be scanned unless you provide the password.

The following options are available:

● Password. If you want Bitdefender to scan the archive, select this option and type the password. If you do not know the password, choose one of the other options.

● Don't ask for a password and skip this object from scan. Select this option to skip scanning this archive.

● Skip all password-protected items without scanning them. Select this option if you do not want to be bothered about password-protected archives.

Bitdefender will not be able to scan them, but a record will be kept in the scan log.

Choose the desired option and click OK to continue scanning.

Step 2 - Choose actions

At the end of the scan, you will be prompted to choose the actions to be taken on the detected files, if any.

Note

When you run a quick scan or a full system scan, Bitdefender will automatically take the recommended actions on detected files during the scan. If there remain unresolved threats, you will be prompted to choose the actions to be taken on them.

The infected objects are displayed in groups, based on the malware they are infected with. Click the link corresponding to a threat to find out more information about the infected objects.

Antivirus protection 66

Bitdefender Antivirus Plus 2013

You can choose an overall action to be taken for all issues or you can select separate actions for each group of issues. One or several of the following options can appear on the menu:

Take proper actions

Bitdefender will take the recommended actions depending on the type of detected file:

● Infected files. Files detected as infected match a malware signature in the

“Managing quarantined files” (p. 72)

Important

For particular types of malware, disinfection is not possible because the detected file is entirely malicious. In such cases, the infected file is deleted from the disk.

● Suspicious files. Files are detected as suspicious by the heuristic analysis.

Suspicious files cannot be disinfected, because no disinfection routine is available. They will be moved to quarantine to prevent a potential infection.

● Archives containing infected files.

▶ Archives that contain only infected files are deleted automatically.

Delete

Removes detected files from the disk.

If infected files are stored in an archive together with clean files, Bitdefender will attempt to delete the infected files and reconstruct the archive with the clean files. If archive reconstruction is not possible, you will be informed that no action can be taken so as to avoid losing clean files.

Antivirus protection 67

Bitdefender Antivirus Plus 2013

Take no action

No action will be taken on the detected files. After the scan is completed, you can open the scan log to view information on these files.

Click Continue to apply the specified actions.

Step 3 - Summary

When Bitdefender finishes fixing the issues, the scan results will appear in a new window. If you want comprehensive information on the scanning process, click Show

Log to view the scan log.

Click Close to close the window.

Important

In most cases Bitdefender successfully disinfects the infected files it detects or it isolates the infection. However, there are issues that cannot be solved automatically.

If required, please restart your system in order to complete the cleaning process. For more information and instructions on how to remove malware manually, please refer to

“Removing malware from your system” (p. 102)

15.2.7. Checking scan logs

Each time a scan is performed, a scan log is created and Bitdefender records the detected issues in the Antivirus Overview window. The scan log contains detailed information about the logged scanning process, such as scanning options, the scanning target, the threats found and the actions taken on these threats.

You can open the scan log directly from the scan wizard, once the scan is completed, by clicking Show Log.

To check a scan log or any detected infection at a later time, follow these steps:

1. Open the

2. Click the Events button on the upper toolbar.

3. In the Events Overview window, select Antivirus.

5. In the events list, you can check what scans have been performed recently. Click an event to view details about it.

6. To open the scan log, click View log. The scan log will open in your default web browser.

Antivirus protection 68

Bitdefender Antivirus Plus 2013

15.3. Automatic scan of removable media

Bitdefender automatically detects when you connect a removable storage device to your computer and scans it in the background. This is recommended in order to prevent viruses and other malware from infecting your computer.

Detected devices fall into one of these categories:

● CDs/DVDs

● USB storage devices, such as flash pens and external hard-drives

● mapped (remote) network drives

You can configure automatic scan separately for each category of storage devices.

Automatic scan of mapped network drives is off by default.

15.3.1. How does it work?

When it detects a removable storage device, Bitdefender starts scanning it for malware in the background (provided automatic scan is enabled for that type of device). A Bitdefender scan icon will appear in the

. You can click this icon to open the scan window and to see the scan progress.

If Autopilot is on, you will not be bothered about the scan. The scan will only be logged and information about it will be available in the

your system” (p. 102) .

window.

If Autopilot is off:

1. You will be notified through a pop-up window that a new device has been detected and it is being scanned.

2. In most cases, Bitdefender automatically removes detected malware or isolates infected files into quarantine. If there are unresolved threats after the scan, you will be prompted to choose the actions to be taken on them.

Note

Take into account that no action can be taken on infected or suspicious files detected on CDs/DVDs. Similarly, no action can be taken on infected or suspicious files detected on mapped network drives if you do not have the appropriate privileges.

3. When the scan is completed, the scan results window is displayed to inform you if you can safely access files on the removable media.

This information may be useful to you:

● Please be careful when using a malware-infected CD/DVD, because the malware cannot be removed from the disc (the media is read-only). Make sure real-time protection is turned on to prevent malware from spreading to your system. It is best practice to copy any valuable data from the disc to your system and then dispose of the disc.

Antivirus protection 69

Bitdefender Antivirus Plus 2013

● In some cases, Bitdefender may not be able remove malware from specific files due to legal or technical constraints. Such an example are files archived using a proprietary technology (this is because the archive cannot be recreated correctly).

To find out how to deal with malware, please refer to

“Removing malware from

15.3.2. Managing removable media scan

To manage automatic scan of removable media, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab.

For best protection, it is recommended to turn on automatic scan for all types of removable storage devices.

The scanning options are pre-configured for the best detection results. If infected files are detected, Bitdefender will try to disinfect them (remove the malware code) or to move them to quarantine. If both actions fail, the Antivirus Scan wizard will allow you to specify other actions to be taken on infected files. The scanning options are standard and you cannot change them.

15.4. Configuring scan exclusions

Bitdefender allows excluding specific files, folders or file extensions from scanning.

This feature is intended to avoid interference with your work and it can also help improve system performance. Exclusions are to be used by users having advanced computer knowledge or, otherwise, following the recommendations of a Bitdefender representative.

You can configure exclusions to apply to on-access or on-demand scanning only, or to both. The objects excluded from on-access scanning will not be scanned, no matter if they are accessed by you or by an application.

Note

Exclusions will NOT apply for contextual scanning. Contextual scanning is a type of on-demand scanning: you right-click the file or folder you want to scan and select

Scan with Bitdefender.

15.4.1. Excluding files or folders from scanning

To exclude specific files or folders from scanning, follow these steps:

1. Open the

Antivirus protection 70

Bitdefender Antivirus Plus 2013

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab.

5. Turn on scan exclusions for files using the corresponding switch.

6. Click the Excluded files and folders link. In the window that appears, you can manage the files and folders excluded from scanning.

7. Add exclusions by following these steps: a. Click the Add button, located at the top of the exclusions table.

b. Click Browse, select the file or folder that you want to be excluded from scanning and then click OK. Alternatively, you can type (or copy and paste) the path to the file or folder in the edit field.

c. By default, the selected file or folder is excluded from both on-access and on-demand scanning. To change when to apply the exclusion, select one of the other options.

d. Click Add.

8. Click OK to save the changes and close the window.

15.4.2. Excluding file extensions from scanning

When you exclude a file extension from scanning, Bitdefender will no longer scan files with that extension, regardless of their location on your computer. The exclusion also applies to files on removable media, such as CDs, DVDs, USB storage devices or network drives.

Important

Use caution when excluding extensions from scanning because such exclusions can make your computer vulnerable to malware.

To exclude file extensions from scanning, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab.

5. Turn on scan exclusions for files using the corresponding switch.

6. Click the Excluded extensions link. In the window that appears, you can manage the file extensions excluded from scanning.

7. Add exclusions by following these steps:

Antivirus protection 71

Bitdefender Antivirus Plus 2013 a. Click the Add button, located at the top of the exclusions table.

b. Enter the extensions that you want to be excluded from scanning, separating them with semicolons (;). Here is an example: txt;avi;jpg c. By default, all files with the specified extensions are excluded from both on-access and on-demand scanning. To change when to apply the exclusion, select one of the other options.

d. Click Add.

8. Click OK to save the changes and close the window.

15.4.3. Managing scan exclusions

If the configured scan exclusions are no longer needed, it is recommended that you delete them or disable scan exclusions.

To manage scan exclusions, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab. Use the options in the Files and folders section to manage scan exclusions.

5. To remove or edit scan exclusions, click one of the available links. Proceed as follows:

● To remove an entry from the table, select it and click the Remove button.

● To edit an entry from the table, double-click it (or select it and click the Edit button). A new window will appear where you can change the extension or the path to be excluded and the type of scanning you want them to be excluded from, as needed. Make the necessary changes, then click Modify.

6. To turn off scan exclusions, use the corresponding switch.

15.5. Managing quarantined files

Bitdefender isolates the malware-infected files it cannot disinfect and the suspicious files in a secure area named quarantine. When a virus is in quarantine it cannot do any harm because it cannot be executed or read.

Antivirus protection 72

Bitdefender Antivirus Plus 2013

In addition, Bitdefender scans the quarantined files after each malware signature update. Cleaned files are automatically moved back to their original location.

To check and manage quarantined files, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Quarantine tab.

5. Quarantined files are managed automatically by Bitdefender according to the default quarantine settings. Though not recommended, you can adjust the quarantine settings according to your preferences.

Rescan quarantine after virus definitions update

Keep this option turned on to automatically scan quarantined files after each virus definitions update. Cleaned files are automatically moved back to their original location.

Submit suspicious quarantined files for further analysis

Keep this option turned on to automatically send quarantined files to

Bitdefender Labs. The sample files will be analyzed by the Bitdefender malware researchers. If malware presence is confirmed, a signature is released to allow removing the malware.

Delete content older than {30} days

By default, quarantined files older than 30 days are automatically deleted.

If you want to change this interval, type a new value in the corresponding field. To disable automatic deletion of old quarantined files, type 0.

6. To delete a quarantined file, select it and click the Delete button. If you want to restore a quarantined file to its original location, select it and click Restore.

15.6. Active Virus Control

Bitdefender Active Virus Control is an innovative proactive detection technology which uses advanced heuristic methods to detect new potential threats in real time.

Active Virus Control continuously monitors the applications running on the computer, looking for malware-like actions. Each of these actions is scored and an overall score is computed for each process. When the overall score for a process reaches a given threshold, the process is considered to be harmful and it is blocked automatically.

If Autopilot is off, you will be notified through a pop-up window about the blocked application. Otherwise, the application will be blocked without any notification. You can check what applications have been detected by Active Virus Control in the

window.

Antivirus protection 73

Bitdefender Antivirus Plus 2013

15.6.1. Checking detected applications

To check the applications detected by Active Virus Control, follow these steps:

1. Open the

2. Click the Events button on the upper toolbar.

3. In the Events Overview window, select Antivirus.

4. In the Antivirus Events window, select the Active Virus Control tab.

5. Click an event to view details about it.

6. If you trust the application, you can configure Active Virus Control not to block it anymore by clicking Allow and monitor. Active Virus Control will continue to monitor excluded applications. If an excluded application is detected to perform suspicious activities, the event will simply be logged and reported to Bitdefender

Cloud as detection error.

15.6.2. Turning on or off Active Virus Control

To turn on or off Active Virus Control, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Shield tab.

5. Click the switch to turn on or off Active Virus Control.

15.6.3. Adjusting the Active Virus Control protection

If you notice that Active Virus Control detects legitimate applications often, you should set a more permissive protection level.

To adjust the Active Virus Control protection, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Shield tab.

5. Make sure Active Virus Control is turned on.

6. Drag the slider along the scale to set the desired protection level. Use the description on the right side of the scale to choose the protection level that better fits your security needs.

Antivirus protection 74

Bitdefender Antivirus Plus 2013

Note

As you set the protection level higher, Active Virus Control will require fewer signs of malware-like behavior to report a process. This will lead to a higher number of applications being reported and, at the same time, to an increased likelihood of false positives (clean applications detected as malicious).

15.6.4. Managing excluded processes

You can configure exclusion rules for trusted applications so that Active Virus Control does not block them if they perform malware-like actions. Active Virus Control will continue to monitor excluded applications. If an excluded application is detected to perform suspicious activities, the event will simply be logged and reported to

Bitdefender Cloud as detection error.

To manage Active Virus Control process exclusions, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab.

5. Click the Excluded processes link. In the window that appears, you can manage the Active Virus Control process exclusions.

6. Add exclusions by following these steps: a. Click the Add button, located at the top of the exclusions table.

b. Click Browse, find and select the application you want to be excluded and then click OK.

c. Keep the Allow option selected to prevent Active Virus Control from blocking the application.

d. Click Add.

7. To remove or edit exclusions, proceed as follows:

● To remove an entry from the table, select it and click the Delete button.

● To edit an entry from the table, double-click it (or select it) and click the Modify button. Make the necessary changes, then click Modify.

8. Save the changes and close the window.

15.7. Fixing system vulnerabilities

An important step in protecting your computer against malicious persons and applications is to keep up to date the operating system and the applications you regularly use. You should also consider disabling Windows settings that make the

Antivirus protection 75

Bitdefender Antivirus Plus 2013 system more vulnerable to malware. Moreover, to prevent unauthorized physical access to your computer, strong passwords (passwords that cannot be easily guessed) must be configured for each Windows user account.

Bitdefender provides two easy ways to fix the vulnerabilities of your system:

● You can scan your system for vulnerabilities and fix them step by step using the

Vulnerability Scan wizard.

● Using automatic vulnerability monitoring, you can check and fix detected vulnerabilities in the

window.

You should check and fix system vulnerabilities every one or two weeks.

15.7.1. Scanning your system for vulnerabilities

To fix system vulnerabilities using the Vulnerability Scan wizard, follow these steps:

1. Open the

2. On the Antivirus panel, click Scan Now and select Vulnerability Scan from the drop-down menu.

3. Follow the six-step guided procedure to remove vulnerabilities from your system.

You can navigate through the wizard using the Next button. To exit the wizard, click Cancel.

a. Protect your PC

Select vulnerabilities to check.

b. Check for issues

Wait for Bitdefender to finish checking your system for vulnerabilities.

c. Windows updates

You can see the list of critical and non-critical Windows updates that are not currently installed on your computer. Select the updates you want to install.

To initiate the installation of selected updates, click Next. Please note that it may take a while to install the updates and some of them may require a system restart to complete the installation. If required, restart the system at your earliest convenience.

d. Application updates

If an application is not up to date, click the provided link to download the latest version.

e. Weak passwords

You can see the list of the Windows user accounts configured on your computer and the level of protection their password provides.

Antivirus protection 76

Bitdefender Antivirus Plus 2013

Click Fix to modify the weak passwords. You can choose between asking the user to change the password at the next logon or changing the password yourself immediately. For a strong password, use a combination of uppercase and lowercase letters, numbers and special characters (such as #, $ or @).

f. Summary

This is where you can view the operation result.

15.7.2. Using automatic vulnerability monitoring

Bitdefender scans your system for vulnerabilities regularly, in the background, and keeps records of detected issues in the

window.

To check and fix the detected issues, follow these steps:

1. Open the

2. Click the Events button on the upper toolbar.

3. In the Events Overview window, select Antivirus.

4. In the Antivirus Events window, select the Vulnerability tab.

5. You can see detailed information regarding the detected system vulnerabilities.

Depending on the issue, to fix a specific vulnerability proceed as follows:

● If Windows updates are available, click Update now to open the Vulnerability

Scan wizard and install them.

● If an application is outdated, click Update now to find a link to the vendor web page from where you can install the latest version of that application.

● If a Windows user account has a weak password, click Fix password to force the user to change the password at the next logon or change the password yourself. For a strong password, use a combination of uppercase and lowercase letters, numbers and special characters (such as #, $ or @).

● If the Windows Autorun feature is enabled, click Disable to disable it.

To configure the vulnerability monitoring settings, follow these steps:

1. Open the

● Antiphishing Protection

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Events window, select the Vulnerability tab.

5. Click the switch to turn on or off Automatic Vulnerability Scan.

Important

To be automatically notified about system or application vulnerabilities, keep the

Automatic Vulnerability Scan enabled.

Antivirus protection 77

Bitdefender Antivirus Plus 2013

6. Choose the system vulnerabilities you want to be regularly checked by using the corresponding switches.

Critical Windows updates

Check if your Windows operating system has the latest critical security updates from Microsoft.

Regular Windows updates

Check if your Windows operating system has the latest regular security updates from Microsoft.

Application updates

Check if crucial web-related applications installed on your system are up-to-date. Outdated applications can be exploited by malicious software, making your PC vulnerable to outside attacks.

Weak passwords

Check whether the passwords of the Windows accounts configured on the system are easy to guess or not. Setting passwords that are hard to guess

(strong passwords) makes it very difficult for hackers to break into your system. A strong password includes uppercase and lowercase letters, numbers and special characters (such as #, $ or @).

Media autorun

Check the status of the Windows Autorun feature. This feature enables applications to be automatically started from CDs, DVDs, USB drives or other external devices.

Some types of malware use Autorun to spread automatically from removable media to the PC. This is why it is recommended to disable this Windows feature.

Note

If you turn off monitoring of a specific vulnerability, related issues will no longer be recorded in the Events window.

Antivirus protection 78

Bitdefender Antivirus Plus 2013

16. Privacy Control

Your private information is a constant target for cyber criminals. As the threats have spread to nearly the entire spectrum of online activities, improperly protected e-mail, instant messaging and web browsing can lead to information leaks that compromise your privacy.

Additionally, important files you store on your computer can one day find themselves in the wrong hands.

Bitdefender Privacy Control addresses all these threats with a multitude of components.

- offers a comprehensive set of features that protect your entire web browsing experience, including preventing you from disclosing personal information to fraudulent websites disguised as legitimate ones.

● IM Encryption

- encrypts your IM conversations to ensure their contents remain between you and your chat partner.

● Data Protection

- helps you make sure that your personal information is not sent from your computer without your consent. It scans the e-mail and instant messages sent from your computer, as well as any data sent via web pages, and blocks any piece of information protected by the Data Protection rules you have created.

● File Shredder

- permanently erases files and their traces from your computer.

● ID theft protection

- for users in the United States, Bitdefender offers a comprehensive identity theft protection service.

16.1. Antiphishing protection

Bitdefender Antiphishing prevents you from disclosing personal information while browsing the Internet by alerting you about potential phishing web pages.

Bitdefender provides real-time antiphishing protection for:

● Internet Explorer

● Mozilla Firefox

● Google Chrome

● Safari

● Opera

● Yahoo! Messenger

To configure Antiphishing settings, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Privacy Control.

Privacy Control 79

Bitdefender Antivirus Plus 2013

4. In the Privacy Control Settings window, select the Antiphishing tab.

Click the switches to turn on or off:

● Showing the

Bitdefender toolbar

in the web browser.

Note

The Bitdefender browser toolbar is not enabled by default.

● Search advisor, a component that rates the results of your search engine queries and the links posted on social networking websites by placing an icon next to every result:

You should not visit this web page.

This web page may contain dangerous content. Exercise caution if you decide to visit it.

This is a safe page to visit.

Search Advisor rates the search results from the following web search engines:

▶ Google

▶ Yahoo!

▶ Bing

▶ Baidu

Search Advisor rates the links posted on the following online social networking services:

▶ Facebook

▶ Twitter

● Scanning SSL web traffic.

More sophisticated attacks might use secure web traffic to mislead their victims.

It is therefore recommended to enable SSL scanning.

● Protection against fraud.

● Protection against phishing.

● Protection for instant messaging.

You can create a list of web sites that will not be scanned by the Bitdefender

Antiphishing engines. The list should contain only web sites you fully trust. For example, add the web sites where you currently shop online.

To configure and manage the antiphishing whitelist, click the Whitelist link. A new window will appear.

To add a site to the whitelist, provide its address in the corresponding field and click

Add.

Privacy Control 80

Bitdefender Antivirus Plus 2013

To remove a web site from the list, select it in the list and click the corresponding

Remove link.

Click Save to save the changes and close the window.

16.1.1. Bitdefender protection in the web browser

Bitdefender integrates directly through an intuitive and easy-to-use toolbar into the following web browsers:

● Internet Explorer

● Mozilla Firefox

● Google Chrome

● Safari

● Opera

The Bitdefender toolbar is not your typical browser toolbar. The only thing it ads to your browser is a small dragger the toolbar.

at the top of every web page. Click it to see

The Bitdefender toolbar contains the following elements:

Page Rating

Depending on how Bitdefender classifies the web page you are currently viewing, one of the following ratings is displayed on the left side of the toolbar:

● The message "Page not safe" appears on a red background - you should leave the web page immediately. To find out more about this threat, click the + symbol on the page rating.

● The message "Caution is advised" appears on an orange background - this web page may contain dangerous content. Exercise caution if you decide to visit it.

● The message "This page is safe" appears on a green background - this is a safe page to visit.

Sandbox

Click to launch the browser in a Bitdefender-provided environment, isolating it from the operating system. This prevents browser-based threats from exploiting browser vulnerabilities to gain control of your system. Use Sandbox when visiting web pages you suspect may contain malware.

Browser windows opened in Sandbox will be easily recognizable through their modified outline and Sandbox icon added at the center of the title bar.

Note

Sandbox is not available on computers running Windows XP.

Privacy Control 81

Bitdefender Antivirus Plus 2013

Settings

Click to select individual features to turn on or off:

● Antiphishing Filter

● Antimalware Web Filter

● Search Advisor

Power Switch

To enable / disable the toolbar features completely, click of the toolbar.

on the right side

16.1.2. Bitdefender alerts in the browser

Whenever you try to visit a website classified as unsafe, the website is blocked and a warning page is displayed in your browser.

The page contains information such as the website URL and the detected threat.

You have to decide what to do next. The following options are available:

● Navigate away from the web page by clicking Take me back to safety.

● Disable blocking pages that contain phishing by clicking Disable Antiphishing

filter.

● Disable blocking pages that contain malware by clicking Disable Antimalware

filter.

● Add the page to the Antiphishing whitelist by clicking Add to whitelist.The page will no longer be scanned by Bitdefender Antiphishing engines.

● Proceed to the web page, despite the warning, by clicking I understand the

risks, take me there anyway.

16.2. IM encryption

The contents of your instant messages should remain between you and your chat partner. By encrypting your conversations, you can make sure anyone trying to intercept them on their way to and from your contacts will not be able to read their contents.

By default, Bitdefender encrypts all your instant messaging chat sessions provided that:

● Your chat partner has a Bitdefender product installed that supports IM Encryption and IM Encryption is enabled for the instant messaging application used for chatting.

● You and your chat partner use Yahoo! Messenger.

Important

Bitdefender will not encrypt a conversation if one of the chat partners uses a web-based chat application such as Meebo.

Privacy Control 82

Bitdefender Antivirus Plus 2013

Once the prerequisites are met, Bitdefender will inform you of the encryption status of your chat session through messages displayed in the chat window.

To turn instant messaging encryption on or off follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Privacy Control.

4. In the Privacy Control Settings window, select the Chat Encryption tab.

5. Click the switch to turn on or off instant messaging encryption. By default, encryption is enabled.

16.3. Data protection

Data protection prevents sensitive data leaks when you are online.

Consider a simple example: you have created a data protection rule that protects your credit card number. If a spyware software somehow manages to install on your computer, it cannot send your credit card number via e-mail, instant messages or web pages. Moreover, your children cannot use it to buy online or reveal it to people they met on the Internet.

16.3.1. About data protection

Whether it is your e-mail or your credit card number, when they fall into the wrong hands such information may cause you damage: you may find yourself drowning in spam messages or you might be surprised to access an emptied account.

Based on the rules you create, Data Protection scans the web, e-mail and instant messaging traffic leaving your computer for specific character strings (for example, your credit card number). If there is a match, the respective web page, e-mail or instant message is blocked.

You can create rules to protect any piece of information you might consider personal or confidential, from your phone number or e-mail address to your bank account information. Multiuser support is provided so that users logging on to different

Windows user accounts can configure and use their own rules. If your Windows account is an administrator account, the rules you create can be configured to also apply when other users of the computer are logged on to their Windows user accounts.

16.3.2. Configuring data protection

If you want to use data protection, follow these steps:

1. Open the

“Creating data protection rules” (p. 84) .

2. Click the Settings button on the upper toolbar.

Privacy Control 83

Bitdefender Antivirus Plus 2013

3. In the Settings Overview window, select Privacy Control.

4. In the Privacy Control Settings window, select the Data Protection tab.

5. Make sure data protection is enabled.

6. Create rules to protect your sensitive data. For more information, please refer to

Creating data protection rules

To create a rule, click the Add rule button and follow the configuration wizard. You can navigate through the wizard using the Next and Back buttons. To exit the wizard, click Cancel.

1. Describe Rule

You must set the following parameters:

● Rule Name - type the name of the rule in this edit field.

● Rule Type - choose the rule type (address, name, credit card, PIN, SSN etc).

● Rule Data - type the data you want to protect in this edit field. For example, if you want to protect your credit card number, type all or part of it here.

Important

It is recommended to enter at least three characters in order to avoid mistakenly blocking messages and web pages. However, for extra safety, only enter partial data (for example, only a part of your credit card number).

● Rule Description - enter a short description of the rule in the edit field. Since the blocked data (character string) is not displayed in plain text when accessing the rule, the description should help you easily identify it.

2. Configure rule settings a. Select the type of traffic you want Bitdefender to scan.

● Scan Web (HTTP traffic) - scans the HTTP (web) traffic and blocks the outgoing data that matches the rule data.

● Scan e-mail (SMTP traffic) - scans the SMTP (mail) traffic and blocks the outgoing e-mail messages that contain the rule data.

You can choose to apply the rule only if the rule data matches whole words or if the rule data and the detected string case match.

b. Specify the users for which the rule applies.

● Only for me (current user) - the rule will apply only to your user account.

● All users - the rule will apply to all Windows accounts.

Privacy Control 84

Bitdefender Antivirus Plus 2013

● Limited user accounts - the rule will apply to you and all limited Windows accounts.

Click Finish. The rule will appear in the table.

From now on, any attempt to send the rule data through the selected protocols will fail. An entry will be displayed in the

window indicating that Bitdefender has blocked identity specific content from being sent.

16.3.3. Managing rules

To manage the data protection rules:

1. Open the

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Privacy Control.

4. In the Privacy Control Settings window, select the Data Protection tab.

You can see the rules created so far listed in the table.

To delete a rule, select it and click the Remove rule button.

To edit a rule select it and click the Edit rule button. A new window will appear.

Here you can change the name, description and parameters of the rule (type, data and traffic). Click OK to save the changes.

16.4. Deleting files permanently

When you delete a file, it can no longer be accessed through normal means. However, the file continues to be stored on the hard disk until it is overwritten when copying new files.

The Bitdefender File Shredder will help you permanently delete data by physically removing it from your hard disk.

You can quickly shred files or folders from your computer using the Windows contextual menu, by following these steps:

1. Right-click the file or folder you want to permanently delete.

2. Select Bitdefender > File Shredder in the context menu that appears.

3. A confirmation window will appear. Click Yes to start the File Shredder wizard.

4. Wait for Bitdefender to finish shredding the files.

5. The results are displayed. Click Close to exit the wizard.

Alternatively, you can shred files from the Bitdefender interface.

1. Open the

“MyBitdefender account” (p. 31)

Privacy Control 85

Bitdefender Antivirus Plus 2013

2. On the Privacy panel, click Secure and select File Shredder from the drop-down menu.

3. Follow the File Shredder wizard: a. Select file/folder

Add the files or folders you want to be permanently removed.

b. Shredding Files

Wait for Bitdefender to finish shredding the files.

c. Results

The results are displayed. Click Close to exit the wizard.

16.5. ID theft protection

To protect you against identity theft, Bitdefender comes with the ID theft

protection service.

Note

This service is available only for users in the United States.

This service monitors and identifies changes in both public and private records such as national security watch lists, Social Security records, national phone records, criminal records, DMV and driving records, medical collections and much more.

To activate this service. use the button on the ID Theft Protection panel in the main Bitdefender window.

ID theft protection can be configured exclusively through your MyBitdefender account. Click the provided link to log in to https://my.bitdefender.com

, where you can learn more about this service and set up identity protection.

Privacy Control 86

Bitdefender Antivirus Plus 2013

17. Safepay secure online transactions

The computer is fast becoming THE tool for shopping and banking. Paying bills, transferring money, buying pretty much anything you can imagine has never been quicker or easier.

This involves sending personal information, account and credit card data, passwords and other types of private information over the Internet, in other words exactly the type of information flow that cyber-criminals are very interested to tap into. Hackers are relentless in their efforts to steal this information, so you can never be too careful about securing online transactions.

Bitdefender Safepay offers a unified solution for the various ways in which your private data can be compromised. It is a protected browser, a sealed environment that is designed to keep your online banking, e-shopping and any other type of online transaction private and secure. You can launch Bitdefender Safepay whenever you want to send sensitive information over the Internet, or set it up that it launches automatically when you visit certain websites.

Bitdefender Safepay offers the following features:

● It blocks access to your desktop and any attempt to take snapshots of your screen.

● It comes with a virtual keyboard which, when used, makes it impossible for hackers to read your keystrokes.

● It is completely independent from your other browsers.

● It comes with built-in hotspot protection to be used when your computer is connected to unsecured Wi-fi networks.

● It supports bookmarks and allows you to navigate between your favorite banking/shopping sites.

● It is not limited to banking and e-shopping. Any website can be opened in

Bitdefender Safepay.

17.1. Using Bitdefender Safepay

By default, Bitdefender detects when you navigate to an online banking site or online shop in any browser on your computer and prompts you to launch it in

Bitdefender Safepay.

To open Bitdefender Safepay manually, follow this path: Start → All Programs →

Bitdefender 2013 → Bitdefender Safepay or, quicker, double-click the Bitdefender

Safepay shortcut on your desktop.

If you are used to web browsers, you will have no trouble using Bitdefender Safepay

- it looks and behaves like a regular browser:

● enter URLs you want to go to in the address bar.

Safepay secure online transactions 87

Bitdefender Antivirus Plus 2013

● add tabs to visit multiple websites in the Bitdefender Safepay window by clicking

respectively.

● navigate back and forward and refresh pages using

● access Bitdefender Safepay

settings

by clicking .

● manage your

bookmarks

by clicking

next to the address bar.

● open the virtual keyboard by clicking

17.2. Configuring settings

Click to configure the following settings:

General Bitdefender Safepay behavior

Choose what will happen when you access an online shop or Internet banking site in your regular web browser:

● Automatically open in Bitdefender Safepay.

● Have Bitdefender prompt you for action each time.

● Never use Bitdefender Safepay for pages visited in a regular browser.

Domains list

Choose how Bitdefender Safepay will behave when you visit websites from specific domains in your regular web browser by adding them to the domains list and selecting the behavior for each one:

● Automatically open in Bitdefender Safepay.

● Have Bitdefender prompt you for action each time.

● Never use Bitdefender Safepay when visiting a page from the domain in a regular browser.

17.3. Managing bookmarks

If you disabled the automatic detection of some or all websites, or Bitdefender simply doesn't detect certain websites, you can add bookmarks to Bitdefender

Safepay so that you can easily launch favorite websites in the future.

Follow these steps to add a URL to Bitdefender Safepay bookmarks:

1. Click next to the address bar to open the Bookmarks page.

Note

The Bookmarks page is opened by default when you start Bitdefender Safepay.

Safepay secure online transactions 88

Bitdefender Antivirus Plus 2013

2. Click the + button to add a new bookmark.

3. Enter the URL and the title of the bookmark and click Create. The URL is also added to the Domains list on the

settings

page.

17.4. Hotspot protection for unsecured networks

When using Bitdefender Safepay while connected to unsecured Wi-fi networks (for example, a public hotspot) an extra layer of security is offered by the Hotspot protection feature. This service encrypts Internet communication over unsecured connections, helping you maintain your privacy no matter what network you are connected to.

The following prerequisites must be met for Hotspot protection to work:

● You are logged in to a MyBitdefender account from Bitdefender Antivirus Plus

2013.

● Your computer is connected to an unsecured network.

Once the prerequisites are met, Bitdefender will automatically prompt you to use the secured connection whenever you open Bitdefender Safepay. All you need to do is enter your MyBitdefender credentials when prompted.

The secure connection will be initialized and a message will be displayed in the

Bitdefender Safepay window when the connection is established. The symbol appears in front of the URL in the address bar to help you easily identify secure connections.

Safepay secure online transactions 89

Bitdefender Antivirus Plus 2013

18. Safego protection for social networks

You trust your online friends, but do you trust their computers? Use Safego protection for social networks to protect your account and your friends from online threats.

Safego is a Bitdefender application developed to keep your Facebook and Twitter accounts safe. Its role is to scan the links you receive from your friends and monitor your account privacy settings.

Note

A MyBitdefender account is required in order to use this feature.

For more information, please refer to

Safego protection for Facebook

These are the main features available for your Facebook account:

● automatically scans the posts in your News Feed for malicious links.

● protects your account against online threats.

When it detects a post or a comment which is a spam, a phishing or a malware, you will receive a warning message.

● warns your friends on suspicious links posted on their News Feed.

● helps you build a safe network of friends using the Friend’O’Meter feature.

● get a system safety status check provided by Bitdefender QuickScan.

To access Safego for Facebook from your Bitdefender product, follow these steps:

1. Open the

2. On the Safego panel, click Manage and select Activate for Facebook from the drop-down menu. You will be directed to your account.

If you already activated Safego for Facebook, you will be able to access statistics regarding its activity by clicking the View Reports for Facebook button.

3. Use your Facebook login information to connect to the Safego application.

4. Allow Safego access to your Facebook account.

Safego protection for Twitter

These are the main features available for your Twitter account:

● permanently scans your account in the background.

● when a threat is detected, you are notified through a direct message so that you can take the necessary actions to neutralize it.

Safego protection for social networks 90

Bitdefender Antivirus Plus 2013

● sends a direct message from your account to those persons on your Follow list in whose accounts issues have been detected.

● scans your private messages for spam, phishing and malware.

● automatically posts weekly security statistics about the activity in your account.

To access Safego for Twitter from your Bitdefender product, follow these steps:

1. Open the

automatic vulnerability monitoring” (p. 77)

2. On the Safego panel, click Manage and select Activate for Twitter from the drop-down menu. You will be directed to your account.

If you already activated Safego for Twitter, you will be able to access statistics regarding its activity by clicking the View Reports for Twitter button.

3. Use your Twitter login information to connect to the Safego application.

4. Allow Safego access to your Twitter account.

Safego protection for social networks 91

Bitdefender Antivirus Plus 2013

19. USB Immunizer

The Autorun feature built into Windows operating systems is a very useful tool that allows computers to automatically execute a file from media connected to it. For example, software installations can start automatically when a CD is inserted into the optical drive.

Unfortunately, this feature can also be used by malware to automatically launch and infiltrate your computer from rewritable media such as USB flash drives and memory cards connected through card readers. Numerous Autorun based attacks have been created in recent years.

With USB Immunizer you can prevent any NTFS, FAT32 or FAT formatted flash drive from automatically executing malware ever again. Once an USB device is immunized, malware can no longer configure it to run a certain application when the device is connected to a computer running Windows.

To immunize an USB device, follow these steps:

1. Connect the flash drive to your computer.

2. Browse your computer to locate the removable storage device and right-click its icon.

3. In the contextual menu, point to Bitdefender and select Immunize this drive.

Note

If the drive has already been immunized, the message The USB device is

protected against autorun-based malware will appear instead of the Immunize option.

To prevent your computer from launching malware from unimmunized USB devices, disable the media autorun feature. For more information, please refer to

“Using

USB Immunizer 92

Bitdefender Antivirus Plus 2013

20. Managing your computers remotely

Your MyBitdefender account allows you to manage the Bitdefender products installed on your computers remotely.

Use MyBitdefender to create and apply tasks to your computers from a remote location.

Any computer will be managed from MyBitdefender account if it meets the following conditions:

● you have installed a Bitdefender 2013 product on the computer

● you have linked the Bitdefender product to the MyBitdefender account.

● the computer is connected to the Internet

20.1. Accessing MyBitdefender

Bitdefender enables you to control the security of your computers by adding tasks to your Bitdefender products.

With Bitdefender you can access your MyBitdefender account on any computer or mobile device connected to the Internet.

Access MyBitdefender:

● On any device with Internet access:

1. Open a web browser.

2. Go to: https://my.bitdefender.com

3. Log in to your account using your user name and password.

● From your Bitdefender 2013 interface:

1. Open the

● “My system appears to be slow” (p. 96)

2. Click the MyBitdefender button at the top of the window and select

Dashboard from the drop-down menu.

20.2. Running tasks on the computers

To run a task on one of your computers, access your MyBitdefender account.

If you click a computer icon at the bottom of the window, you can see all the administrative tasks you can run on the remote computer.

Product registration

Allows you to register Bitdefender on the remote computer by entering a license key.

Perform a complete scan of your PC

Allows you to run a complete scan on the remote computer.

Managing your computers remotely 93

Bitdefender Antivirus Plus 2013

Scan critical areas to detect active malware

Allows you to run a quick scan on the remote computer.

Fix critical issues

Allows you to fix the issues that are affecting the security of the remote computer.

Product update

Initiates the update process for the Bitdefender product installed on this computer.

Managing your computers remotely 94

Bitdefender Antivirus Plus 2013

Troubleshooting

Bitdefender Antivirus Plus 2013

21. Solving common issues

This chapter presents some problems you may encounter when using Bitdefender and provides you with possible solutions to these problems. Most of these problems can be solved through the appropriate configuration of the product settings.

● “Scan doesn't start” (p. 97)

● “I can no longer use an application” (p. 97)

● “How to update Bitdefender on a slow Internet connection” (p. 98)

● “My computer is not connected to the Internet. How do I update Bitdefender?”

(p. 99)

● “Bitdefender services are not responding” (p. 99)

● “Bitdefender removal failed” (p. 100)

● “My system doesn't boot up after installing Bitdefender” (p. 100)

If you cannot find your problem here, or if the presented solutions do not solve it, you can contact the Bitdefender technical support representatives as presented in chapter

do I remove other security solutions?” (p. 51) .

21.1. My system appears to be slow

Usually, after installing a security software, there may appear a slight slowdown of the system, which to a certain degree is normal.

If you notice a significant slowdown, this issue can appear for the following reasons:

● Bitdefender is not the only security program installed on the system.

Though Bitdefender searches and removes the security programs found during the installation, it is recommended to remove any other antivirus program you may use before installing Bitdefender. For more information, please refer to

“How

● The Minimum System Requirements for running Bitdefender are not met.

If your machine does not meet the Minimum System Requirements, the computer will become sluggish, especially when multiple applications are running at the same time. For more information, please refer to

“Minimum system requirements”

(p. 3)

● Your hard disk drives are too fragmented.

File fragmentation slows down file access and decreases system performance.

Solving common issues 96

Bitdefender Antivirus Plus 2013

To defragment your disk using your Windows operating system, follow the path from the Windows start menu: Start → All Programs → Accessories → System

Tools → Disk Defragmenter.

21.2. Scan doesn't start

This type of issue can have two main causes:

● A previous Bitdefender installation which was not completely removed

or a faulty Bitdefender installation.

In this case, follow these steps:

1. Remove Bitdefender completely from the system: a. Go to http://www.bitdefender.com/uninstall and download the uninstall tool on your computer.

b. Run the uninstall tool using administrator privileges.

c. Restart your computer.

2. Reinstall Bitdefender on the system.

● Bitdefender is not the only security solution installed on your system.

In this case, follow these steps:

1. Remove the other security solution. For more information, please refer to

“How

do I remove other security solutions?” (p. 51)

2. Remove Bitdefender completely from the system: a. Go to http://www.bitdefender.com/uninstall and download the uninstall tool on your computer.

b. Run the uninstall tool using administrator privileges.

c. Restart your computer.

3. Reinstall Bitdefender on the system.

If this information was not helpful, you can contact Bitdefender for support as described in section

21.3. I can no longer use an application

This issue occurs when you are trying to use a program which was working normally before installing Bitdefender.

You may encounter one of these situations:

● You could receive a message from Bitdefender that the program is trying to make a modification to the system.

● You could receive an error message from the program you're trying to use.

Solving common issues 97

Bitdefender Antivirus Plus 2013

This type of situation occurs when the Active Virus Control module mistakenly detects some applications as malicious.

Active Virus Control is a Bitdefender module which constantly monitors the applications running on your system and reports those with potentially malicious behavior. Since this feature is based on a heuristic system, there may be cases when legitimate applications are reported by Active Virus Control.

When this situation occurs, you can exclude the respective application from being monitored by Active Virus Control.

To add the program to the exclusions list, follow these steps:

1. Open the

2. Click the Settings button on the upper toolbar..

3. In the Settings Overview window, select Antivirus.

4. In the Antivirus Settings window, select the Exclusions tab.

5. Click the Excluded Processes link. In the window that appears, you can manage the Active Virus Control process exclusions.

6. Add exclusions by following these steps: a. Click the Add button, located at the top of the exclusions table.

b. Click Browse, find and select the application you want to be excluded and then click OK.

c. Keep the Allow option selected to prevent Active Virus Control from blocking the application.

d. Click Add.

If this information was not helpful, you can contact Bitdefender for support as described in section

21.4. How to update Bitdefender on a slow Internet connection

If you have a slow Internet connection (such as dial-up), errors may occur during the update process.

To keep your system up to date with the latest Bitdefender malware signatures, follow these steps:

1. Open the

“Am I using a 32 bit or a 64 bit version of Windows?”

2. Click the Settings button on the upper toolbar.

3. In the Settings Overview window, select Update.

4. In the Update Settings window, select the Update tab.

5. Under Update processing rules, select Prompt before downloading.

Solving common issues 98

Bitdefender Antivirus Plus 2013

6. Click to return to the main window.

7. Go to the Update panel and click Update Now.

8. Select only Signatures updates and then click OK.

9. Bitdefender will download and install only the malware signature updates.

21.5. My computer is not connected to the Internet. How do I update Bitdefender?

If your computer is not connected to the Internet, you must download the updates manually to a computer with Internet access and then transfer them to your computer using a removable device, such as a flash drive.

Follow these steps:

1. On a computer with Internet access, open a web browser and go to: http://www.bitdefender.com/site/view/Desktop-Products-Updates.html

2. In the Manual Update column, click the link corresponding to your product and system architecture. If you do not know whether your Windows is running on 32 or 64 bits, please refer to

(p. 50) .

3. Save the file named weekly.exe to the system.

4. Transfer the downloaded file on a removable device, such as a flash drive, and then to your computer.

5. Double-click the file and follow the wizard steps.

21.6. Bitdefender services are not responding

This article helps you troubleshoot the Bitdefender Services are not responding error. You may encounter this error as follows:

● The Bitdefender icon in the

“How do I remove other security solutions?”

is grayed out and you are informed that the Bitdefender services are not responding.

● The Bitdefender window indicates that the Bitdefender services are not responding.

The error may be caused by one of the following conditions:

● an important update is being installed.

● temporary communication errors between the Bitdefender services.

● some of the Bitdefender services are stopped.

● other security solutions running on your computer at the same time with

Bitdefender.

Solving common issues 99

Bitdefender Antivirus Plus 2013

To troubleshoot this error, try these solutions:

1. Wait a few moments and see if anything changes. The error may be temporary.

2. Restart the computer and wait a few moments until Bitdefender is loaded. Open

Bitdefender to see if the error persists. Restarting the computer usually solves the problem.

3. Check if you have any other security solution installed as they may disrupt the normal operation of Bitdefender. If this is the case, we recommend you to remove all of the other security solutions and then reinstall Bitdefender.

For more information, please refer to

(p. 51) .

If the error persists, please contact our support representatives for help as described in section

“Asking for help” (p. 111) .

21.7. Bitdefender removal failed

This article helps you troubleshoot errors that may occur when removing Bitdefender.

There are two possible situations:

● During removal, an error screen appears. The screen provides a button to run an uninstall tool that will clean up the system.

● The removal hangs out and, possibly, your system freezes. Click Cancel to abort the removal. If this does not work, restart the system.

If removal fails, some Bitdefender registry keys and files may remain in your system.

Such remainders may prevent a new installation of Bitdefender. They may also affect system performance and stability.

In order to completely remove Bitdefender from your system, follow these steps:

1. Go to http://www.bitdefender.com/uninstall and download the uninstall tool on your computer.

2. Run the uninstall tool using administrator privileges.

3. Restart your computer.

If this information was not helpful, you can contact Bitdefender for support as described in section

“How do I restart in Safe Mode?” (p. 52) .

21.8. My system doesn't boot up after installing Bitdefender

If you just installed Bitdefender and cannot reboot your system in normal mode anymore there may be various reasons for this issue.

Most probably this is caused by a previous Bitdefender installation which was not removed properly or by another security solution still present on the system.

Solving common issues 100

Bitdefender Antivirus Plus 2013

This is how you may address each situation:

● You had Bitdefender before and you did not remove it properly.

To solve this, follow these steps:

1. Reboot your system and enter in Safe Mode. To find out how to do this, please refer to

2. Remove Bitdefender from your system: a. Go to http://www.bitdefender.com/uninstall and download the uninstall tool on your computer.

b. Run the uninstall tool using administrator privileges.

c. Restart your computer.

3. Reboot your system in normal mode and reinstall Bitdefender.

● You had a different security solution before and you did not remove it properly.

To solve this, follow these steps:

1. Reboot your system and enter in Safe Mode. To find out how to do this, please refer to

“How do I restart in Safe Mode?” (p. 52) .

2. Remove Bitdefender from your system: a. Go to http://www.bitdefender.com/uninstall and download the uninstall tool on your computer.

b. Run the uninstall tool using administrator privileges.

c. Restart your computer.

3. In order to correctly uninstall the other software, go to their website and run their uninstall tool or contact them directly in order to provide you with the uninstall guidelines.

4. Reboot your system in normal mode and reinstall Bitdefender.

You have already followed the steps above and the situation is not solved.

To solve this, follow these steps:

1. Reboot your system and enter in Safe Mode. To find out how to do this, please refer to

“How do I restart in Safe Mode?” (p. 52)

2. Use the System Restore option from Windows to restore the computer to an earlier date before installing the Bitdefender product. To find out how to do this, please refer to

“How do I use System Restore in Windows?” (p. 52) .

3. Reboot the system in normal mode and contact our support representatives for help as described in section

● “Bitdefender Rescue Mode” (p. 102)

Solving common issues 101

Bitdefender Antivirus Plus 2013

22. Removing malware from your system

Malware can affect your system in many different ways and the Bitdefender approach depends on the type of malware attack. Because viruses change their behavior frequently, it is difficult to establish a pattern for their behavior and their actions.

There are situations when Bitdefender cannot automatically remove the malware infection from your system. In such cases, your intervention is required.

● “What to do when Bitdefender finds viruses on your computer?” (p. 104)

● “How do I clean a virus in an archive?” (p. 105)

● “How do I clean a virus in an e-mail archive? ” (p. 106)

● “What to do if I suspect a file as being dangerous?” (p. 107)

● “How to clean the infected files from System Volume Information” (p. 107)

● “What are the password-protected files in the scan log?” (p. 108)

● “What are the skipped items in the scan log?” (p. 109)

● “What are the over-compressed files in the scan log?” (p. 109)

● “Why did Bitdefender automatically delete an infected file?” (p. 109)

If you cannot find your problem here, or if the presented solutions do not solve it, you can contact the Bitdefender technical support representatives as presented in chapter

22.1. Bitdefender Rescue Mode

Rescue Mode is a Bitdefender feature that allows you to scan and disinfect all existing hard drive partitions outside of your operating system.

Once Bitdefender Antivirus Plus 2013 is installed, Rescue Mode can be used even if you are no longer able to boot into Windows.

Starting your system in Rescue Mode

You can enter Rescue Mode in one of two ways:

From the Bitdefender window

To enter Rescue Mode directly from Bitdefender, follow these steps:

1. Open the

“Starting your system in Rescue Mode” (p.

2. On the Antivirus panel, click Scan Now and select Rescue Mode from the drop-down menu.

A confirmation window will appear. Click Yes to reboot your computer.

Removing malware from your system 102

Bitdefender Antivirus Plus 2013

3. After the computer restarts, a menu will appear prompting you to select an operating system. Choose Bitdefender Rescue Image and press the Enter key to boot into a Bitdefender environment from where you can clean up your Windows partition.

4. If prompted, press Enter and select the screen resolution closest to the one you normally use. Then press Enter again.

Bitdefender Rescue Mode will load in a few moments.

Boot your computer directly into Rescue Mode

If Windows no longer starts, you can boot your computer directly into Bitdefender

Rescue Mode by following the steps below.

Note

This method is not available on computers running Windows XP.

1. Start / reboot your computer and start pressing the space key on your keyboard before the Windows logo appears.

2. A menu will appear prompting you to select an operating system to start.

Press TAB to go to the tools area. Choose Bitdefender Rescue Image and press the Enter key to boot into a Bitdefender environment from where you can clean up your Windows partition.

3. If prompted, press Enter and select the screen resolution closest to the one you normally use. Then press Enter again.

Bitdefender Rescue Mode will load in a few moments.

Scanning your system in Rescue Mode

To scan your system in Rescue Mode, follow these steps:

1. Enter Rescue Mode, as described in

102)

2. The Bitdefender logo will appear and the antivirus engines will start to be copied.

3. A welcome window will then appear. Click Continue.

4. An update of the antivirus signatures is started.

5. After the update is completed, the Bitdefender On-demand Antivirus Scanner window will appear.

6. Click Scan Now, select the scan target in the window that appears and click

Open to start scanning.

It is recommended to scan your entire Windows partition.

Removing malware from your system 103

Bitdefender Antivirus Plus 2013

Note

When working in Rescue Mode, you are dealing with Linux-type partition names.

Disk partitions will appear as sda1 probably corresponding to the (C:)

Windows-type partition, sda2 corresponding to (D:) and so on.

7. Wait for the scan to complete. If any malware is detected, follow the instructions to remove the threat.

8. To exit Rescue Mode, right-click in an empty area of the desktop, select Logout in the menu that appears and then choose whether to reboot or shut down the computer.

22.2. What to do when Bitdefender finds viruses on your computer?

You may find out there is a virus on your computer in one of these ways:

● You scanned your computer and Bitdefender found infected items on it.

● A virus alert informs you that Bitdefender blocked one or multiple viruses on your computer.

In such situations, update Bitdefender to make sure you have the latest malware signatures and run a Full System Scan to analyze the system.

As soon as the full scan is over, select the desired action for the infected items

(Disinfect, Delete, Move to quarantine).

Warning

If you suspect the file is part of the Windows operating system or that it is not an infected file, do not follow these steps and contact Bitdefender Customer Care as soon as possible.

If the selected action could not be taken and the scan log reveals an infection which could not be deleted, you have to remove the file(s) manually:

The first method can be used in normal mode:

1. Turn off the Bitdefender real-time antivirus protection: a. Open the

“How do I display hidden objects in Windows?” (p. 51) .

b. Click the Settings button in the upper toolbar.

c. Select Antivirus.

d. Click the Shield tab in the Antivirus Settings window.

e. Click the switch to turn off On-access scanning.

2. Display hidden objects in Windows. To find out how to do this, please refer to

Removing malware from your system 104

Bitdefender Antivirus Plus 2013

3. Browse to the location of the infected file (check the scan log) and delete it.

4. Turn on the Bitdefender real-time antivirus protection.

In case the first method failed to remove the infection, follow these steps:

1. Reboot your system and enter in Safe Mode. To find out how to do this, please refer to

“How do I restart in Safe Mode?” (p. 52)

2. Display hidden objects in Windows.

3. Browse to the location of the infected file (check the scan log) and delete it.

4. Reboot your system and enter in normal mode.

If this information was not helpful, you can contact Bitdefender for support as described in section

22.3. How do I clean a virus in an archive?

An archive is a file or a collection of files compressed under a special format to reduce the space on disk necessary for storing the files.

Some of these formats are open formats, thus providing Bitdefender the option to scan inside them and then take appropriate actions to remove them.

Other archive formats are partially or fully closed, and Bitdefender can only detect the presence of viruses inside them, but is not able to take any other actions.

If Bitdefender notifies you that a virus has been detected inside an archive and no action is available, it means that removing the virus is not possible due to restrictions on the archive’s permission settings.

Here is how you can clean a virus stored in an archive:

1. Identify the archive that includes the virus by performing a System Scan of the system.

2. Turn off the Bitdefender real-time antivirus protection: a. Open the

b. Click the Settings button in the upper toolbar.

c. Select Antivirus.

d. Click the Shield tab in the Antivirus Settings window.

e. Click the switch to turn off On-access scanning.

3. Go to the location of the archive and decompress it using an archiving application, like WinZip.

4. Identify the infected file and delete it.

5. Delete the original archive in order to make sure the infection is totally removed.

Removing malware from your system 105

Bitdefender Antivirus Plus 2013

6. Recompress the files in a new archive using an archiving application, like WinZip.

7. Turn on the Bitdefender real-time antivirus protection and run a Full system scan in order to make sure there is no other infection on the system.

Note

It's important to note that a virus stored in an archive is not an immediate threat to your system, since the virus has to be decompressed and executed in order to infect your system.

If this information was not helpful, you can contact Bitdefender for support as described in section

22.4. How do I clean a virus in an e-mail archive?

Bitdefender can also identify viruses in e-mail databases and e-mail archives stored on disk.

Sometimes it is necessary to identify the infected message using the information provided in the scan report, and delete it manually.

Here is how you can clean a virus stored in an e-mail archive:

1. Scan the e-mail database with Bitdefender.

2. Turn off the Bitdefender real-time antivirus protection: a. Open the

b. Click the Settings button in the upper toolbar.

c. Select Antivirus.

d. Click the Shield tab in the Antivirus Settings window.

e. Click the switch to turn off On-access scanning.

3. Open the scan report and use the identification information (Subject, From, To) of the infected messages to locate them in the e-mail client.

4. Delete the infected messages. Most e-mail clients also move the deleted message to a recovery folder, from which it can be recovered. You should make sure the message is deleted also from this recovery folder.

5. Compact the folder storing the infected message.

● In Outlook Express: On the File menu, click Folder, then Compact All Folders.

● In Microsoft Outlook: On the File menu, click Data File Management. Select the personal folders (.pst) files you intend to compact, and click Settings. Click

Compact.

6. Turn on the Bitdefender real-time antivirus protection.

Removing malware from your system 106

Bitdefender Antivirus Plus 2013

If this information was not helpful, you can contact Bitdefender for support as described in section

“How do I scan my system?” (p. 43) .

22.5. What to do if I suspect a file as being dangerous?

You may suspect a file from your system as being dangerous, even though your

Bitdefender product did not detect it.

To make sure your system is protected, follow these steps:

1. Run a System Scan with Bitdefender. To find out how to do this, please refer to

2. If the scan result appears to be clean, but you still have doubts and want to make sure about the file, contact our support representatives so that we may help you.

To find out how to do this, please refer to

“Asking for help” (p. 111) .

22.6. How to clean the infected files from System Volume

Information

The System Volume Information folder is a zone on your hard drive created by the

Operating System and used by Windows for storing critical information related to the system configuration.

The Bitdefender engines can detect any infected files stored by the System Volume

Information, but being a protected area it may not be able to remove them.

The infected files detected in the System Restore folders will appear in the scan log as follows:

?:\System Volume Information\_restore{B36120B2-BA0A-4E5D-…

To completely and immediately remove the infected file or files in the data store, disable and re-enable the System Restore feature.

When System Restore is turned off, all the restore points are removed.

When System Restore is turned on again, new restore points are created as the schedule and events require.

In order to disable the System Restore follow these steps:

● For Windows XP:

1. Follow this path: Start → All Programs → Accessories → System Tool →

System Restore

2. Click System Restore Settings located on the left hand side of the window.

3. Select the Turn off System Restore check box on all drives, and click Apply.

4. When you are warned that all existing Restore Points will be deleted, click Yes to continue.

Removing malware from your system 107

Bitdefender Antivirus Plus 2013

5. To turn on the System Restore, clear the Turn off System Restore check box on all drives, and click Apply.

● For Windows Vista:

1. Follow this path: Start → Control Panel → System and Maintenance →

System

2. In the left pane, click System Protection.

If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

3. To turn off the System Restore clear the check boxes corresponding to each drive and click OK.

4. To turn on the System Restore select the check boxes corresponding to each drive and click OK.

● For Windows 7:

1. Click Start, right-click Computer and click Properties.

2. Click System protection link in the left pane.

3. In the System protection options, select each drive letter and click Configure.

4. Select Turn off system protection and click Apply.

5. Click Delete, click Continue when prompted and then click OK.

If this information was not helpful, you can contact Bitdefender for support as described in section

“Solving common issues” (p. 96)

22.7. What are the password-protected files in the scan log?

This is only a notification which indicates that Bitdefender has detected these files are either protected with a password or by some form of encryption.

Most commonly, the password-protected items are:

● Files that belong to another security solution.

● Files that belong to the operating system.

In order to actually scan the contents, these files would need to either be extracted or otherwise decrypted.

Should those contents be extracted, Bitdefender's real-time scanner would automatically scan them to keep your computer protected. If you want to scan those files with Bitdefender, you have to contact the product manufacturer in order to provide you with more details on those files.

Our recommendation to you is to ignore those files because they are not a threat for your system.

Removing malware from your system 108

Bitdefender Antivirus Plus 2013

22.8. What are the skipped items in the scan log?

All files that appear as Skipped in the scan report are clean.

For increased performance, Bitdefender does not scan files that have not changed since the last scan.

22.9. What are the over-compressed files in the scan log?

The over-compressed items are elements which could not be extracted by the scanning engine or elements for which the decryption time would have taken too long making the system unstable.

Overcompressed means that Bitdefender skipped scanning within that archive because unpacking it proved to take up too many system resources. The content will be scanned on real time access if needed.

22.10. Why did Bitdefender automatically delete an infected file?

If an infected file is detected, Bitdefender will automatically attempt to disinfect it.

If disinfection fails, the file is moved to quarantine in order to contain the infection.

For particular types of malware, disinfection is not possible because the detected file is entirely malicious. In such cases, the infected file is deleted from the disk.

This is usually the case with installation files that are downloaded from untrustworthy websites. If you find yourself in such a situation, download the installation file from the manufacturer's website or other trusted website.

Removing malware from your system 109

Bitdefender Antivirus Plus 2013

Contact us

110

Bitdefender Antivirus Plus 2013

23. Asking for help

Bitdefender strives to provide its customers with an unparalleled level of fast and accurate support. If you experience any issue with or if you have any question about your Bitdefender product, you can use several online resources to quickly find a solution or an answer. Or, if you prefer, you can contact the Bitdefender Customer

Care team. Our support representatives will answer your questions in a timely manner and they will provide you with the assistance you need.

The

section provides you with the necessary information regarding the most frequent issues you may encounter when using this product.

If you do not find the solution to your problem in the provided resources, you can contact us directly:

● “Contact us directly from your Bitdefender product” (p. 111)

● “Contact us through our online Support Center” (p. 112)

Important

To contact the Bitdefender Customer Care you must register your Bitdefender product.

For more information, please refer to

“Registering Bitdefender” (p. 29)

Contact us directly from your Bitdefender product

If you have a working Internet connection, you can contact Bitdefender for assistance directly from the product interface.

Follow these steps:

1. Open the

2. Click the Help and Support link, located at the bottom-right corner of the window.

3. You have the following options:

● Bitdefender Help.

Browse the Bitdefender documentation articles and try the proposed solutions.

● Support Center

Access our database and search for the necessary information.

● Contact Support

Use the Contact Support button to launch the Support Tool and contact the

Customer Care Department. You can navigate through the wizard using the

Next button. To exit the wizard, click Cancel.

a. Select the agreement check box and click Next.

Asking for help 111

Bitdefender Antivirus Plus 2013 b. Complete the submission form with the necessary data: i. Enter your e-mail address.

ii. Enter your full name.

iii. Choose your country from the corresponding menu.

iv. Enter a description of the issue you encountered.

c. Please wait for a few minutes while Bitdefender gathers product related information. This information will help our engineers find a solution to your problem.

d. Click Finish to send the information to the Bitdefender Customer Care

Department. You will be contacted as soon as possible.

Contact us through our online Support Center

If you cannot access the necessary information using the Bitdefender product, please refer to our online Support Center:

1. Go to http://www.bitdefender.com/support/consumer.html

. The Bitdefender

Support Center hosts numerous articles that contain solutions to

Bitdefender-related issues.

2. Select your product and search the Bitdefender Support Center for articles that may provide a solution to your problem.

3. Read the relevant articles or documents and try the proposed solutions.

4. If the solution does not solve your problem, go to http://www.bitdefender.com/support/contact-us.html

and contact our support representatives.

Asking for help 112

Bitdefender Antivirus Plus 2013

24. Online resources

Several online resources are available to help you solve your Bitdefender-related problems and questions.

● Bitdefender Support Center: http://www.bitdefender.com/support/consumer.html

● Bitdefender Support Forum: http://forum.bitdefender.com

● the HOTforSecurity computer security portal: http://www.hotforsecurity.com

You can also use your favorite search engine to find out more information about computer security, the Bitdefender products and the company.

24.1. Bitdefender Support Center

The Bitdefender Support Center is an online repository of information about the

Bitdefender products. It stores, in an easily accessible format, reports on the results of the ongoing technical support and bugfixing activities of the Bitdefender support and development teams, along with more general articles about virus prevention, the management of Bitdefender solutions with detailed explanations, and many other articles.

The Bitdefender Support Center is open to the public and freely searchable. The extensive information it contains is yet another means of providing Bitdefender customers with the technical knowledge and insight they need. All valid requests for information or bug reports coming from Bitdefender clients eventually find their way into the Bitdefender Support Center, as bugfix reports, workaround cheatsheets or informational articles to supplement product helpfiles.

The Bitdefender Support Center is available any time http://www.bitdefender.com/support/consumer.html

24.2. Bitdefender Support Forum

The Bitdefender Support Forum provides Bitdefender users with an easy way to get help and to help others.

If your Bitdefender product does not operate well, if it cannot remove specific viruses from your computer or if you have questions about the way it works, post your problem or question on the forum.

Bitdefender support technicians monitor the forum for new posts in order to assist you. You may also get an answer or a solution from a more experienced Bitdefender user.

Before posting your problem or question, please search the forum for a similar or related topic.

Online resources 113

Bitdefender Antivirus Plus 2013

The Bitdefender Support Forum is available at http://forum.bitdefender.com

, in 5 different languages: English, German, French, Spanish and Romanian. Click the

Home & Home Office Protection link to access the section dedicated to consumer products.

24.3. HOTforSecurity Portal

The HOTforSecurity portal is a rich source of computer security information. Here you can learn about the various threats your computer is exposed to when connected to the Internet (malware, phishing, spam, cyber-criminals). A useful dictionary helps you understand the computer security terms that you are not familiar with.

New articles are posted regularly to keep you up-to-date with the latest threats discovered, the current security trends and other information on the computer security industry.

The HOTforSecurity web page is http://www.hotforsecurity.com

Online resources 114

Bitdefender Antivirus Plus 2013

25. Contact information

Efficient communication is the key to a successful business. During the past 10 years BITDEFENDER has established an unquestionable reputation by constantly striving for better communication so as to exceed the expectations of our clients and partners. Should you have any questions, do not hesitate to contact us.

25.1. Web addresses

Sales department: [email protected]

Support Center: http://www.bitdefender.com/help

Documentation: [email protected]

Local distributors: http://www.bitdefender.com/partners

Partner program: [email protected]

Media relations: [email protected]

Careers: [email protected]

Virus submissions: [email protected]

Spam submissions: [email protected]

Report abuse: [email protected]

Web site: http://www.bitdefender.com

25.2. Local distributors

The Bitdefender local distributors are ready to respond to any inquiries regarding their areas of operation, both in commercial and in general matters.

To find a Bitdefender distributor in your country:

1. Go to http://www.bitdefender.com/partners/#Partner Locator/ .

2. The contact information of the Bitdefender local distributors should be displayed automatically. If this does not happen, select the country you reside in to view the information.

3. If you do not find a Bitdefender distributor in your country, feel free to contact us by e-mail at [email protected]

. Please write your e-mail in English in order for us to be able to assist you promptly.

25.3. Bitdefender offices

The Bitdefender offices are ready to respond to any inquiries regarding their areas of operation, both in commercial and in general matters. Their respective addresses and contacts are listed below.

U.S.A

Bitdefender, LLC

Contact information 115

Bitdefender Antivirus Plus 2013

PO Box 667588

Pompano Beach, Fl 33066

Phone (office&sales): 1-954-776-6262

Technical support: http://www.bitdefender.com/help

Web: http://www.bitdefender.com

UK and Ireland

Genesis Centre Innovation Way

Stoke-on-Trent, Staffordshire

ST6 4BF

E-mail: [email protected]

Phone: +44 (0) 8451-305096

Technical support: http://www.bitdefender.com/help

Web: http://www.bitdefender.co.uk

Germany

Bitdefender GmbH

Airport Office Center

Robert-Bosch-Straße 2

59439 Holzwickede

Deutschland

Office: +49 2301 91 84 0

Technical support: http://kb.bitdefender.de

Web: http://www.bitdefender.de

Spain

Bitdefender España, S.L.U.

Avda. Diagonal, 357, 1º 1ª

08037 Barcelona

Fax: +34 93 217 91 28

Phone: +34 902 19 07 65