Huawei HA35 Owner's Manual

HA35 Hybrid Access Gateway

User Guide

Version 2.1 (May 2016)

Contents

1.

Product Overview .............................................................6

1.1. Supported Features .................................................................... 6

1.2. Ports and Buttons........................................................................ 7

1.3. Indicators .................................................................................... 8

2.

Hardware Installation ..................................................... 11

2.1. Selecting an Installation Location .............................................. 11

2.2. Installing the HA35 on a Hybrid Broadband Network ................ 12

2.2.1. PSTN or Broadband Telephone Line with one voice channel and a 3G/4G connection .................................... 12

2.2.2. ISDN Line and 3G/4G connection .................................... 13

2.2.3. Broadband Telephone Line with the intervention of an electrician in the internal home wiring (i.e. legacy ISDN wiring) and a 3G/4G connection ...................................... 14

2.3. Installing the HA35 on a DSL Broadband Network .................... 15

2.3.1. PSTN or Broadband Telephone Line with one voice channel ........................................................................... 15

2.3.2. ISDN Line ......................................................................... 16

2.3.3. Broadband Telephone Line with the ntervention of an electrician in the internal home wiring (i.e. legacy ISDN wiring) ............................................................................. 17

2.4. Installing the HA35 on a 3G/4G Network .................................. 18

2.5. Powering On ............................................................................. 19

3.

Setting Network Parameters .........................................20

3.1. Setting the Computer IP Address .............................................. 20

3.1.1. Obtain an IP address automatically .................................. 20

3.1.2. Set a static IP address ...................................................... 22

3.2. Logging In to the Web Management Page ................................ 23

3.3. Setting Network Access Parameters ......................................... 24

3.3.1. Accessing the Network through the Hybrid gateway ......... 24

3.3.2. Accessing the Network through DSL ................................ 28

Version 2.1 (May 2016) 2

3.3.3. Accessing the Network through the SIM card ................... 29

3.4. Configuring a Wireless Account ................................................ 31

3.5. Check My Network Status ......................................................... 31

4.

Wireless Connection Setup...........................................33

4.1. Setting Up a Wireless Connection Using the WPS Button ........ 33

4.2. Manually Setting Up a Wireless Connection ............................. 34

4.2.1. On Windows 7 .................................................................. 34

5.

WLAN Configuration ......................................................35

5.1. Enabling and Disabling the WLAN on the HA35 ....................... 35

5.1.1. Using the WLAN Button .................................................... 35

5.1.2. Using the Web Management Page ................................... 35

5.2. Changing Your WLAN Name and Password ............................. 35

5.3. WLAN Advanced Settings ......................................................... 36

6.

Network Security ............................................................37

6.1. Improving WLAN Security ......................................................... 37

6.1.1. Hiding the WLAN Name ................................................... 37

6.1.2. Using High Security Encryption Modes ............................ 38

6.1.3. Enable the WPS Function ................................................ 38

6.2. Allowing Only Specified Computers to Access Your WLAN ....... 41

6.3. Controlling Computer Internet Access ....................................... 42

6.4. Filtering Out Inappropriate Websites ......................................... 43

6.5. Configuring the Firewall ............................................................ 45

6.5.1. Recommended Firewall Level .......................................... 45

6.5.2. Configuring the Firewall .................................................... 45

6.6. Configure an ACL ...................................................................... 46

6.7. Configure DMZ .......................................................................... 48

6.8. Configure Application Filter ....................................................... 48

6.9. Configure Port Forwarding ........................................................ 50

6.9.1. Configure Port Mapping .................................................... 50

6.9.2. Configure Port Trigger ...................................................... 52


7.

Internet Services ............................................................53

7.1. Dynamic DNS ........................................................................... 53

7.2. Simple Network Time Protocol .................................................. 54

7.3. Multicast management .............................................................. 55

8.

IP Telephony ...................................................................56

8.1. Introduction to IP Telephony ...................................................... 56

8.2. Configuring VoIP ....................................................................... 56

8.3. Placing a VoIP Call .................................................................... 58

9.

USB Device .....................................................................59

9.1. USB Storage Device ................................................................. 59

9.2. You can connect a USB storage device to your HA35 and access the USB device from your computer. ....................................... 59

9.3. Connecting a USB Device ......................................................... 59

9.3.1. Setting the FTP Access Permission .................................. 59

9.3.2. Accessing to FTP Server Through the User Name and

Password ........................................................................ 59

9.3.3. Accessing a USB Storage Device Using FTP ................... 61

9.3.4. Setting the Samba Access Permission ............................. 61

9.3.5. Accessing Data Using Samba .......................................... 63

9.4. Configuring Multimedia Sharing ................................................ 63

9.5. Sharing a USB Printer ............................................................... 64

9.5.1. On Windows 7 .................................................................. 64

10.

Maintenance Guide ......................................................65

10.1. Changing the IP Address Used to Log In to the Web

Management Page .................................................................. 65

10.2. Setting the DHCP Server IP range .......................................... 65

10.3. RA Settings ............................................................................. 66

10.4. IPv6 DHCP Server .................................................................. 67

10.5. Changing the Web Management Page Password ................... 67

10.6. Rebooting Device .................................................................... 68

10.7. Restoring Default Settings ...................................................... 69


10.7.1. Using the Reset Button ................................................... 69

10.7.2. Using the Configuration Tool ........................................... 69

10.8. Upgrading Firmware ................................................................ 69

10.9. Using Ping Tool Diagnose Network ......................................... 70

10.10. Using Tracert Tool Diagnose Network ................................... 71

11.

Reference Operations ..................................................72

11.1. Setting Dial-Up Connection Parameters .................................. 72

11.2. Enabling Wireless Configuration on Windows ......................... 75

11.3. Checking the Computer MAC Address .................................... 75

12.

FAQs ..............................................................................77

12.1. What Can I Do If I Cannot Open the Web Management Page?

................................................................................................ 77

12.2. What Can I Do If the HA35 Cannot Access the Internet through a Wireless Network Adapter Sometimes or If the WLAN

Connection Is Unsteady? ........................................................ 77

12.3. What Can I Do If I Cannot Access the Internet? ...................... 77

12.4. I Often Need to Restart the HA35 to Display Web Pages. What

Can I Do? ................................................................................ 79

12.5. What Is the Difference Between Wireless MAC Address

Filtering and MAC Address Filtering? ...................................... 79

12.6. Can I Change the WLAN Password? ...................................... 79

13.

Appendix .......................................................................80

13.1. Technical Specifications .......................................................... 80

13.2. Default Settings ....................................................................... 81

14.

For More Help ...............................................................82

15.

Legal Notice ..................................................................83

16.

Acronyms and Abbreviations .....................................85

17.

List of Pictures .............................................................87

18.

List of Tables ................................................................92


1.

Product Overview

1.1. Supported Features

The HA35 Hybrid Access Gateway (HA35 for short) is a high-speed wireless router designed for home and small office use. This chapter describes the features supported by the HA35.

 Digital subscriber line (DSL) provides rugged stability, and with the Wi-Fi Protected

Setup (WPS) button, zero configuration is required for connections to multiple devices.

 Network range allows any device in a home to be connected with a wireless transmission rate of up to 300 Mbps.

 A powerful firewall is provided with a flexible network configuration and quality of service (QoS) strategy, enabling different home devices to enjoy high-speed and highquality broadband services.

High-Bandwidth DSL Connectivity

The HA35 incorporates a high-performance ADSL2+/VDSL2 processor and provides highspeed Internet access and abundant services to be delivered through the digital subscriber line (DSL).

Routing

The HA35 supports routing. It can obtain an IP address through PPP dial-up or Dynamic

Host Configuration Protocol (DHCP), which provides simultaneous access for multiple devices.

WLAN

The HA35 supports multiple WLAN protocols, including 802.11b/g/n (2.4 GHz). Adopting

802.11n multiple-input multiple-output antennas (MIMO) technology, the HA35 delivers a wireless transmission rate of up to 300 Mbps with its dual antennas. In addition, the HA35 supports multiple wireless encryption modes to provide a secure, reliable, and high-speed

WLAN.

Bandwidth Control

The HA35 supports bandwidth control and allocates bandwidth to different computers within your home based on Internet access requirements. Your family can then access the

Internet, play online games, and watch videos without interfering with each other.

Wi-Fi Protected Setup

You can set up wireless connections between the HA35 and Wi-Fi enabled devices by pressing the WPS button.

Firewall

The powerful built-in firewall effectively protects against viruses and malicious attacks.


Parental Controls

Parents can control their children's computer usage by placing time limits on usage duration or forbidding access to certain websites.

Easy Configuration and Management

The HA35 provides password-protected web-based management pages to protect your personal data.

1.2. Ports and Buttons

1

10

9

2

3

No.

1

Item

SIM

DSL

LAN1–LAN4

4

5

RESET

USB

2 3 4 5 6 7 8

Picture 1-1 ports and buttons

Description

Inserts a SIM card.

Connects to a DSL filter or phone socket.

Connects to Ethernet devices, such as computers, set-top boxes (STBs), and switches.

Restores the HA35 to its default settings after you press and hold this button for 6 seconds or more while the HA35 is powered on.

A reset will result in all custom data and settings being lost.

Use with caution.

Connects to a USB 2.0 device.

If you connect a USB device to the HA35, verify that the input voltage and current of the USB device does not exceed

5 V/0.5 A. Otherwise, the HA35 may malfunction.


No.

6

7

8

9

10

Item

PHONE1–

PHONE2

POWER

ON/OFF

WLAN

WPS

Description

Connects to a telephone.

Connects to a power adapter.

Powers the HA35 on or off.

Enables or disables the WLAN function.

Starts Wi-Fi protected setup (WPS) negotiation.

1.3. Indicators

Table 1-1 ports and buttons

Indicator

POWER

DSL

Picture 1-2 front side

Status

Green on

Red Blinking

Off

Description

The HA35 is powered on.

Self-checking failed after the HA35 is powered on.

The HA35 is powered off or faulty.

Green on The HA35 is activated through DSL.

Green Blinking The HA35 is being activated through DSL.


Indicator

INTERNET

MODE

WLAN

LAN1–LAN4

VoIP

Status

Off

Description

The DSL port is not activated successfully.

The HA35 is powered off.

Green on

Green Blinking The HA35 is connected to the Internet, and data is being transmitted.

Off The HA35 is working in routing mode, but the connection has not been set up.


Steady on

The HA35 is working in routing mode.

No data is being transmitted.

Red Blinking

Cyan: the HA35 is registered to the LTE network.

Blue: the HA35 is registered to the WCDMA network.

There is no SIM card or the SIM card is faulty.

The SIM card is locked.

The SIM card is unavailable.

Off

Green on

There is no wireless service.


The WLAN connection is set up, but no data is being transmitted.

Green Blinking The WLAN connection is set up, and data is being transmitted.

The WPS is in InProgress or Error status.

Off The WLAN function is disabled.


Green on

Off

The HA35 is connected to a device properly.

Green Blinking Data is being transmitted between the HA35 and the connected device.

No connection is set up on the port.


Green on The HA35 is registered with a SIP (Session Initiation

Protocol) server, but no data is being transmitted.

Green Blinking The HA35 is registering with a SIP server.

The VoIP connection is set up, and data is being transmitted.


Indicator

SIGNAL

Status

Off

Green on

Off

Description

The HA35 is not registered with a SIP server.


Indicates the WCDMA/LTE signal strength of the

HA35.

There is no WCDMA/LTE signal.


Table 1-2 indicators


2.

Hardware Installation

2.1. Selecting an Installation Location

Place the HA35 on a well-ventilated even surface without exposure to direct sunlight. For the best possible performance, take note of the following:

 Make sure there are no obstacles, such as concrete or wooden walls, between the computer and HA35.

 Ensure that the computer and HA35 are far from electric appliances that generate strong magnetic or electric fields, such as microwave ovens.


2.2. Installing the HA35 on a Hybrid Broadband

Network

2.2.1. PSTN or Broadband Telephone Line with one voice channel and a 3G/4G connection

Connect your devices in the sequence indicated in the following figure.

Picture 2-1 connect devices in hybrid broadband network

(PSTN Line)

1 HA35

4 SIM card

7 Set-top Box

10 Smart Phone a LINE port

2 Telephone wall jack &

1 to 2 RJ-11 Y adapter

5 Telephone & Filter

8 Power adapter

11 Pad b PHONE port

3 Splitter

6 Desktop computer

9 Laptop computer c MODEM port

When configuring the HA35 for the first time, use an Ethernet cable to connect the

HA35 to a computer.


2.2.2. ISDN Line and 3G/4G connection



(ISDN Line)

1 HA35

4 SIM card

7 Desktop computer

10 Laptop computer a LINE port

2 Telephone wall jack

5 Telephone

8 Set-top Box

11 Smart Phone b PHONE port

3

6

9

12 c

Splitter

ISDN (NT1) Device

Power adapter

Pad

MODEM port

When configuring the HA35 for the first time, use an Ethernet cable to connect the HA35

to a computer.


2.2.3. Broadband Telephone Line with the intervention of an electrician in the internal home wiring (i.e. legacy

ISDN wiring) and a 3G/4G connection


(intervention of an electrician in the internal home wiring)

1 HA35

4 Telephone

7 Power adapter

10 Pad


5 Desktop computer

8 Laptop computer

3

6

9

SIM card

Set-top Box

Smart Phone


2.3. Installing the HA35 on a DSL Broadband

Network

2.3.1. PSTN or Broadband Telephone Line with one voice channel

In some communities, Internet service providers use telephone lines to provide broadband access services.

If you have subscribed to digital subscriber line (DSL) broadband, you can connect the

HA35 to a telephone port for Internet access.


Picture 2-4 connect devices in DSL broadband network

(PSTN Line)

1 HA35

4 Telephone & Filter

7 Power adapter

10 Pad a LINE port

2 Telephone wall jack &

1 to 2 RJ-11 Y adapter

5 Desktop computer

8 Laptop computer b PHONE port

3 Splitter

6 Set-top Box

9 Smart Phone c MODEM port


2.3.2. ISDN Line


(ISDN Line)

1 HA35

4 ISDN (NT1) Device

7 Set-top Box

10 Smart Phone a LINE port


5 Telephone

8 Power adapter

11 Pad b PHONE port c

3

6

9

Splitter

Desktop computer

Laptop computer

MODEM port


2.3.3. Broadband Telephone Line with the ntervention of an electrician in the internal home wiring (i.e. legacy

ISDN wiring)


(with the intervention of electrician in the internal wiring)

1 HA35

4 Desktop computer

7 Laptop computer


5 Set-top Box

8 Smart Phone

3 Telephone

6 Power adapter

9 Pad


2.4. Installing the HA35 on a 3G/4G Network

If you use the SIM card to access the Internet, you can insert the SIM card into the SIM card slot on the HA35.


7

6

8

5

1

4

3

2

Picture 2-7 connect devices in 3G/4G network

1 HA35

4 SIM card

7 Smart Phone

2 Desktop computer

5 Power adapter

8 Pad

3 Set-top Box

6 Laptop computer

• Insert and remove the SIM card when the HA35 is powered off.

• Do not connect the HA35 to the telephone wall outlet (or any Public Switched Telephone

Network), because doing so could damage the HA35 due to excessive heat.


2.5. Powering On

To power on the HA35, press the POWER button.

After the HA35 is powered on, the POWER indicator turns on. If the indicators do not behave as expected, ensure that everything is plugged in correctly.


3.

Setting Network Parameters

3.1. Setting the Computer IP Address

Before logging in to the HA35 web management page, set the IP address of the computer that will be used for the login.

3.1.1. Obtain an IP address automatically

1. Click in the lower right corner of your desktop. Choose Open Network and

Sharing Center.

2. Choose Change adapter settings. Right-click Local Area Connection and choose

Properties.

Picture 3-1 local area connection


3. Double-click Internet Protocol Version 4 (TCP/IPv4).

Picture 3-2 wireless network connection properties

4. Select Obtain an IP address automatically and Obtain DNS server address

automatically. Click OK.

Picture 3-3 internet protocol version 4 properties


3.1.2. Set a static IP address

1. Click in the lower right corner of your desktop. Choose Open Network and

Sharing Center.

2. Choose Change adapter settings. Right-click Local Area Connection and choose

Properties.


3. Double-click Internet Protocol Version 4 (TCP/IPv4).

Picture 3-5 wireless network connection properties


4. Select Use the following IP address. Set IP address to 192.168.1.*, Subnet mask to

255.255.255.0, and Default gateway to admi. Click OK to return to the previous dialog box and click OK.

Picture 3-6 internet protocol version 4 properties

3.2. Logging In to the Web Management Page

The HA35 provides an intuitive web management page where you can view or set the

HA35 parameters.

Before you log in to the HA35 web management page, ensure that the computer used for the login is connected to the HA35 and has been configured to automatically obtain an

IP address or assigned with a static IP address.

1. Open a browser. In the address box, enter 192.168.1.1. Press Enter.

2. Enter the login user name (admin by default) and password (the password printed on the HA35's cover). Click Log in.

Picture 3-7 log in to the Web Management Page


3. Enter your current password, and a new password. Re-enter the new password to confirm it, and click Save.

Picture 3-8 account management

•

To protect against unauthorized access, change the password after the first login.

After modifying the password successfully, this page will jump to the login page, where you can use the new password to log in.

•

The system will be locked if you enter incorrect user name or password three consecutive times. One minute later, it will be unlocked.

•

If you do not perform any operations after logging in to the system for five minutes, you will exit the system and the system automatically returns to the login interface.

3.3. Setting Network Access Parameters

3.3.1. Accessing the Network through the Hybrid gateway

When you install the HA35 for the first time, you need to configure the HA35.

To configure the HA35 through the setup wizard, do as follows:

1. Log in to the web management page.

2. Choose Home tab, click Start Wizard.

Picture 3-9 home

3. Enter the parameters provided by your ISP and click Next


Picture 3-10 set internet connection

4. Enter your desired SSID (WLAN name) and key and click Save.

Picture 3-11 set SSID and key

If your SIM card does not need to verify the PIN for Internet access (in the case where the customer does not receive any PIN from the operator), skip step 5 - step 9. Just jump to step 10.

5. Insert a SIM card into the HA35's SIM card slot.

6. Choose Internet tab, click Internet Settings.The different usage scenarios will appear,

as shown in Picture 3-12 internet settings.


Picture 3-12 internet settings

7.

Scroll down to find the INTERNET_R_UMTS1 usage scenario, as shown in Picture

3-13 internet settings 2.

Picture 3-13 internet settings 2

8. Choose INTERNET_R_UMTS1 tab, click Edit.


Picture 3-14 3G/4G vlan

9. Enter the PIN that was provided by your SIM card operator in the PIN text box. Click

Save.

Picture 3-15 set PIN

10. Choose Home tab, click Internet > Bonding Tunnel. If LTE\DSL\Bonding all displayed

UP, it means that your HA35 is working in Hybrid mode.


Picture 3-16 bonding tunnel

27

3.3.2. Accessing the Network through DSL

When you install the HA35 for the first time, you need to configure the HA35.

To configure the HA35 through the setup wizard, do as follows:


2. Choose Home tab, click Start Wizard.

Picture 3-17 home

3. Enter the parameters provided by your ISP and click Next.

Picture 3-18 set internet connection

4. Enter your desired SSID (WLAN name) and key and click Save



3.3.3. Accessing the Network through the SIM card

Insert the SIM card to the HA35 so that your device can access the Internet through the

3G/4G uplink service.

If your SIM card does not need to verify the PIN for Internet access, skip this section (in the case where the customer does not receive any PIN from the operator).

To set up a dial-up connection for Internet access:

1. Insert a SIM card into the HA35's SIM card slot.


3. Choose Internet tab, click Internet Settings. The different usage scenarios will appear,

as shown in Picture 3-20 internet settings.

Picture 3-20 internet settings

4.

Scroll down to find the INTERNET_R_UMTS1 usage scenario, as shown in Picture

3-21 internet settings 2.


Picture 3-21 internet settings 2

5. Choose INTERNET_R_UMTS1 tab, click Edit.

Picture 3-22 3G/4G vlan

6. Enter the PIN that was provided by your SIM card operator in the PIN text box. Click

Save.

Picture 3-23 set PIN

After you complete the preceding settings, check the status of the Internet indicator light.

When the Internet indicator light turns steady green, you can start browsing the Internet.


3.4. Configuring a Wireless Account

After you Log in to the web management page, you will see a configuration wizard page used to configure the wireless account.


2. Choose Home tab, click Set Up WLAN, enter your desired SSID (WLAN name) and key and click Save.


To obtain the default SSID and key, check the label on the bottom. To better secure your

WLAN, promptly change the SSID and key.

3.5. Check My Network Status

After you Log in to the web management page, you will see a page used to check network status.



Picture 3-25 home

2. Choose Home tab, click Check My Network Status, and check your network status in this page.

Internet icon color The HA35 is connected to the Internet. gray The HA35 is disconnected from the

Internet.

Device icon (WLAN Device/Ethernet

Device/Phone Device/USB Device) color The device is connected to the HA35. gray The device is disconnected from the

HA35.

Table 3-1 connected devices to the HA35 router


Picture 3-26 network status

4.

Wireless Connection Setup

4.1. Setting Up a Wireless Connection Using the

WPS Button

Push the WPS button once, to quickly set up a wireless connection between the HA35 and any WPS-capable device.

Before you set up a wireless connection using the WPS button, verify the following:

 The wireless network security mode of the HA35 is WPA2-PSK or WPA-PSK/WPA2–

PSK.

 The wireless device (laptop, tablet, or mobile phone) to connect to the HA35 is WPScapable.

1. Press the WPS button on the wireless device to start the WPS negotiation. For details, see the user guide for the wireless device.

2. Within 2 minutes, press and hold the WPS button on the HA35 for 1 second or more.

When the WPS indicator of the HA35 is on and then off, a connection between the HA35 and wireless device has been set up.


4.2. Manually Setting Up a Wireless Connection

The wireless configuration software provided by Windows is used as an example to describe how to set up a wireless connection.

You can also use the tool built into the network adapter to set up a wireless connection.

For details, see the network adapter's user guide.

Before setting up a wireless connection, record the WLAN name and password of the HA35.

The default WLAN name and password are printed on the HA35 cover label.

4.2.1. On Windows 7

1. Click in the lower right corner of your desktop.

2. From the wireless network list, select the WLAN provided by the HA35. Click Connect.

Picture 4-1 connect Wi-Fi

3. In the displayed dialog box, enter the WLAN password and click OK.

Picture 4-2 Wi-Fi key

4. In the wireless network list, check the WLAN connection status. If the status is

Connected, the computer is wirelessly connected to the HA35.


Picture 4-3 Wi-Fi connected

34

5.

WLAN Configuration

5.1. Enabling and Disabling the WLAN on the

HA35

The following two methods are available to enable and disable the WLAN on the HA35.

5.1.1. Using the WLAN Button

Press the WLAN button in the HA35 to enable or disable the WLAN. To ascertain whether the WLAN is enabled, view the WLAN indicator.

5.1.2. Using the Web Management Page


2. Choose Home Network tab.

3. In the navigation tree, choose WLAN Settings.

Picture 5-1 WLAN basic settings

4. Select Basic Settings configuration page.

5. Set Enable WLAN 2.4 GHz to enable.

6. Click Save.

5.2. Changing Your WLAN Name and Password

WLAN access requires the WLAN name and password. To improve your WLAN security, regularly change your WLAN name and password.




4. Select WLAN Encryption configuration page.

5. In SSID, enter a new WLAN name.

6. In WPA pre-shared key, enter a new WLAN password.

7. Click Save.


Picture 5-2 WLAN Encryption

After the SSID and key had been changed, your computer should use the new ones to establish a wireless connection to the HA35.

5.3. WLAN Advanced Settings

You can see the Advanced Settings page in WLAN Settings tab, though you can, usually, keep the default values.



3.

In the navigation tree, choose WLAN Settings (see Picture 5-1 WLAN basic settings).

4. Select Advanced Settings configuration page.

5. Select your desired configuration.

6. Click Save.

Picture 5-3 WLAN Advanced Settings


6.

Network Security

6.1. Improving WLAN Security

6.1.1. Hiding the WLAN Name

After you hide the WLAN name or SSID, anyone who wishes to connect to the WLAN must enter the correct WLAN name. This measure helps improve WLAN security.





5. Set Enable AP isolation to prevent connections between computers in the same

WLAN network that use the same SSID

6. Set Hide Broadcast to hide the WLAN name. This option also disables WPS.

7. Set Show password to view the password in the WPA pre-shared key text box which normally is hidden with bullets

8. Click Save.



37

6.1.2. Using High Security Encryption Modes

Adopting high security encryption modes protects against unauthorized access as well as data interception on networks.

To improve WLAN security without sacrificing working efficiency, use WPA-PSK/WPA2–

PSK and TKIP+AES. This step also prevents WLAN unavailability caused by network adapters' incompatibility with the selected security mode.





5. Select the Security mode that you prefer.

6. Select the WPA/WPA2 (strong) or WPA2 (very strong) encryption mode that you prefer.

7. In WPA pre-shared key text box, enter the new WLAN password that you want to

specify (see Picture 5-2 WLAN Encryption).

8. Click Save.


After the password used for accessing a WLAN is changed, you need to enter the new password when connecting a PC to the WLAN.

6.1.3. Enable the WPS Function

After the WPS function is turned on, you can safely access the wireless network without entering a wireless network name and password.



3.

In the navigation tree, choose WLAN Access (see Picture 5-1 WLAN basic settings).

4. Select the WLAN WPS configuration page.


5. Set Enable WPS to enable.

6. Under the expanded WPS configuration menu, select the WPS mode you want to use.

Picture 6-3 WPS by push button

7. WPS by push button (PBC) Enable the WPS function by pressing the WPS button on the HA35.

8. WPS by client PIN (PIN) Get the pin code from a pin client and then enter it in the PIN code text box. Click Connect.

Picture 6-4 WPS by client PIN

9. WPS by AP-PIN (AP-PIN) Click PIN to get the pin code automatically filled-in into the

AP-PIN text box and then enter the same pin code on the pin client e.g. AP (Access

Point).


10. Click Save.

Picture 6-5 WPS by AP-PIN


6.2. Allowing Only Specified Computers to

Access Your WLAN

To prevent unauthorized access to your WLAN, you can specify which devices are allowed to access your WLAN.

1. Connect a computer and the HA35 via wireless.



4.

In the navigation tree, choose WLAN Access (see Picture 5-1 WLAN basic settings).

5. Select WLAN Access Rules configuration page.

6. Set Only allow specific computers in the WLAN to enable the parameter.

7. In Managed LAN devices, click Select all to apply the settings to all connected devices to the HA35. Or click Add device, to select a specific device.

8. Click Save.

Picture 6-6 WLAN access rules


Picture 6-7 WLAN access rules 2

41

6.3. Controlling Computer Internet Access

You can prohibit certain PCs from accessing the Internet or allow only certain PCs to access the Internet. In addition, you can set the period during which the PCs are not allowed to access the Internet.


2. Choose Internet tab.

3. In the navigation tree, choose Parental Control.

4. Select Time Rules configuration page.

5. Click New time rule parameter.

Picture 6-8 parental control

6.

In the Rule name text box according to Picture 6-9 time rules below, enter the filtering

rule name that you want.

7. In the Internet access allowed text box, specify the time period that the Parental

Control settings are applied.


Picture 6-9 time rules

42

8. In Apply to, click Select all to apply the settings to all connected devices to the HA35.

9. Or click Add device, to select a specific device.

Picture 6-10 time rules

10. Click Save.

6.4. Filtering Out Inappropriate Websites

Use URL filtering to prevent certain websites from being accessed.



3. In the navigation tree, choose Parental Control.

4. Select the URL Filter configuration page.

5. Click New URL filter.


Picture 6-11 URL filter

43

6. In the URL to block text box, enter the Web site address that will be blocked.

7. Click Manually specify devices to enable the parameter.

8. In Apply to, click Select all to apply the settings to all the connected devices to the

HA35.

Picture 6-12 URL filter

Or click Add device, to select a specific device where access will be denied to the blocked

Web site address.

Picture 6-13 URL filter – block a device

9. Click Save.


6.5. Configuring the Firewall

The preset protective levels of the firewall are as follows:

Level

High

Description

When you set the firewall level of the router to High, only the FTP packets are allowed to pass through.

Low When you set the firewall level of the router to Low, the active packets from the LAN to the WAN are allowed to pass through.

Table 6-1 firewall

6.5.1. Recommended Firewall Level

To better protect your privacy and prevent the HA35 from malicious network attacks, it is recommended that you set the firewall level to High, so that the LAN computers can only browse the web and download files using an FTP server, while prohibiting Internet users access to the HA35.

6.5.2. Configuring the Firewall

The HA35 provides a firewall to help secure its WLAN and any devices connected to it. Set the firewall level based on site requirements to quickly configure the firewall.



3. In the navigation tree, choose Network Security.

4. Select the Firewall configuration page.

5.

In Firewall level, select the firewall level that you prefer according to Table 6-1 firewall .

6. Click Save.


Picture 6-14 firewall

ICMP Flood: The attacker sends plenty of ICMP packets to the specific target within a short time period to request responses, causing the target system unduly burdened and unable to process legitimate transmissions.

SYN Flood: The TCP/IP protocol stack only permits a limited number of TCP connections due to resource restrictions. SYN Flood attacks utilize this feature. The attacker forges a

SYN packet whose source address is forged or nonexistent, and initiates a connection to the server. Upon receipt of this packet, the server replies with a SYN-ACK packet. Because there is no receiver of the SYN-ACK packet, a half-connection is established. If the attacker sends large numbers of such packets, a lot of half-connections are established on the attacked host and the resources of the attacked host are exhausted; therefore, normal users cannot access the host until the half-connections expire. In some implementations where connections can be created without restrictions, SYN Flood has similar influences that consume the system resources such as the memory.

ARP attack: In ARP attacks, through the vulnerability of ARP, the attacker makes hosts on a LAN unable to access the Internet by forging data to refresh the dynamic ARP table.

Alternatively, the attacker causes network breakdown or data disclosure by spoofing to steal sensitive information.

6.6. Configure an ACL

After ACL is enabled, you can limit the access rights of unauthorized users and prevent network resources from being used improperly.




4. Select the ACL configuration page.

5. Click New ACL.


6. In Service type, select the service type for the access rule that you want to enable.

7. In Access direction, select LAN to apply the ACL to the traffic entering the LAN interface, or select WAN to apply the ACL to the traffic entering the WAN interface.

8. Click the Choose devices parameter to select the device or devices where the ACL will be applied.

9. In Block for, click Select all to apply the settings to all connected devices to the HA35.

Or click the device that you want to activate the ACL. Click Add device, to select another device.

10. Click Save.

Picture 6-15 ACL


Picture 6-16 ACL 2

47

6.7. Configure DMZ

After DMZ is enabled, the computer that is configured as a DMZ host is exposed to the

Internet. For example, when building a server, you can configure the computer providing external services as a DMZ host, which helps protect other computers on the home network.




4. Select the DMZ configuration page.

5. In Host address, select the device that you want to act as a DMZ host, or click Add

device to add a new DMZ host.

6. Set Enable DMZ to enable the capability.

7. Click Save.

Picture 6-17 DMZ

6.8. Configure Application Filter

To enable the application filter function on a specified computer, you can block network attacks from applications to the specified computer.




4. Select the Application Filter configuration page.

5. Click New application filter.


Picture 6-18 application filter

6. In Filter name, enter a rule name for the application filter.

7. In Block, select the application you want to filter, or click Add application to add a new port application.

8. In Block for, click Select all to apply the settings to all connected devices to the HA35.

Or click the device that you want to activate the Application filter. Or click Add device, to select a specific device.

9. Click Save.


Picture 6-19 application filter 2

49

Picture 6-20 application filter 3

6.9. Configure Port Forwarding

You can set forwarding rules on the HA35 so that users can easily access server resources provided by your computer (such as personal websites and FTP servers) from the Internet.

6.9.1. Configure Port Mapping

By setting a port forwarding rule, you can let an Internet user to access a local computer.



3. In the navigation tree, choose Port Forwarding.

4. Select the Port Mapping configuration page.

5. Click New port mapping.


Picture 6-21 port mapping

6.

Picture 6-22 port mapping 2 shows the Mapping name text box, to enter a name for the

port forwarding rule.

7. In Application, select the application type you want to set, or click Add port mapping

application to add a new application type.

8. In Internal host, select a local computer you want to set, or click Add device to add a new local computer.

9. Click Save.


Picture 6-22 port mapping 2

51

6.9.2. Configure Port Trigger

By setting port triggering, when the LAN has client-initiated requests from an Internet server, the application triggers a port or ports to initiate a connection, thereby triggering HA35 to open the appropriate ports to ensure the normal use of the application.



3. In the navigation tree, choose Port Forwarding.

4. Select the Port Trigger configuration page.

5. Click New port trigger.

Picture 6-23 port trigger

6.

Picture 6-24 port trigger 2 shows the Trigger name text box, to enter a name for the

port triggering rule.

7. In Application, select the application type you want to set, or click Add port trigger application to add a new application type.

8. Click Save.


Picture 6-24 port trigger 2

52

7.

Internet Services

7.1. Dynamic DNS

The Dynamic Domain Name System (DDNS) dynamically maps an IP address to a domain name. After DDNS is enabled, the HA35 sends the dynamic IP address of your computer to the DDNS server. The DDNS server then maps the updated IP address to a fixed domain name. Internet users can use the fixed domain name to access resources that your computer provides, without tracing the IP address of your computer.



3. In the navigation tree, choose Internet Services.

Picture 7-1 dynamic DNS

4. Set Enable DDNS to enable the feature.

5.

Picture 7-2 dynamic DNS 2 shows how to select the supported Provider.

6. Enter the Host name and Domain name that you have obtained from the domain name administrative organization.

7. Enter the Username and Password that you have registered on the DDNS server.

8. Click Save.


Picture 7-2 dynamic DNS 2

7.2. Simple Network Time Protocol

The Simple Network Time Protocol (SNTP) synchronizes clocks of computers on the

Internet. After SNTP is enabled, the HA35 obtains the standard time from an Internet time server to synchronize to the system time.



3.

Picture 7-3 simple network time protocol shows the navigation tree to choose Internet

Services.

4. Choose the Primary NTP server and Secondary NTP server.

5. Choose the Local time zone name.

6. Click Save.


Picture 7-3 simple network time protocol

After this function is enabled, the HA35 corrects the system time according to your settings.

7.3. Multicast management

After multicast management is enabled, the HA35 receives multicast data on the Internet through the configured multicast proxy and forwards multicast data only to the terminal devices that want to receive the multicast data, such as an IPTV STB.



3.

Picture 7-4 multicast management shows the navigation tree, to choose Internet

Services.

4. Set Enable IGMP proxy (for IPv4) or Enable MLD proxy (for IPv6) to enable the feature.

5. Choose the WAN connection.

6. Click Save.


Picture 7-4 multicast management

8.

IP Telephony

8.1. Introduction to IP Telephony

IP telephony, namely voice over Internet Protocol (VoIP), is also called broadband telephony or Internet telephony. It utilizes Internet Protocol (IP) network technologies to implement voice communication. During a VoIP call, voice signals are digitized, encoded, packetized, and transmitted as packets over a network. On the receiving side, the packets are then decoded, and digital signals are converted to reproduce the original voice streams, which can be heard by the called party. Different from traditional PSTN calls, VoIP calls are transported over IP networks, meaning voice streams are transmitted over users' existing broadband Internet. This makes full use of broadband resources.

8.2. Configuring VoIP

The HA35 supports VoIP. You can place VoIP calls after your phone is connected to the

Phone port on the HA35.

To use the HA35 to place VoIP calls, ask your network service provider to activate VoIP services for you. By default, your network service provider will have all related parameters, such as the VoIP account and address, set for you. You will not need to configure any settings to place VoIP calls.

Choose Telephony -->VoIP to display the VoIP provider page, as shown in Picture 8-1

VoIP providers.


Picture 8-1 VoIP providers

Click on “View” in Picture 8-1 VoIP providers to see the information of the VoIP provider as shown in Picture 8-2 VoIP providers 2. This information is filled in automatically by the

system and cannot be changed by the user.

Picture 8-2 VoIP providers 2

To configure voice services, do as follows:

1. Configure a VoIP number.

a. Picture 8-1 VoIP providers shows how to choose Telephony > VoIP > VoIP

Accounts .

b. Click on VoIP Accounts to display the VoIP configuration page (see Picture 8-3 VoIP accounts)

c. Select the VoIP provider name from the drop-down list box. d. Enter the SIP phone number. e. Enter the SIP Username and Password.


f. Click Enable to enable the VoIP account. g. Click Save to save the settings.

Picture 8-3 VoIP accounts

The parameters of the SIP account, according to Picture 8-3 VoIP accounts, are completed

automatically by the IMS system in a few minutes after the synchronization of the VoIP service.

2. Associate your telephone to the VoIP number.

a. Picture 8-1 VoIP providers shows how to choose Telephony > Telephone to display

the telephony page (see Picture 8-4 telephone).

b. Associate your telephone to the VoIP number.

Picture 8-4 telephone

8.3. Placing a VoIP Call

Once your network service provider has activated VoIP services for you, you will be assigned a VoIP account, which is also your VoIP call number.

Before placing a VoIP call, ensure that the HA35 has connected to the network. When the call is established, your VoIP call number is displayed on the called party's phone.

For VoIP call tariffs, contact your network service provider.


9.

USB Device

9.1. USB Storage Device

USB storage devices use their USB ports to exchange data with other devices.

9.2. You can connect a USB storage device to your HA35 and access the USB device from your computer.

Both the USB drive and removable hard disk can connect to your HA35.

Your HA35 supports the following file systems for reading and writing.

 FAT32/FAT

 NTFS

 HFS+

 Ext2/3

9.3. Connecting a USB Device

After you connect a USB device to your HA35, computers or other devices connected to the HA35 network can access and share the data or applications provided by the USB device.

If you connect a USB device to the HA35, verify that the input voltage and current of the

USB device do not exceed 5 V/0.5 A. Otherwise, the HA35 may malfunction.

You can connect the following USB devices to your HA35:

 USB storage device

 USB printer

9.3.1. Setting the FTP Access Permission

To avoid unauthorized access to the USB storage device, you can set the FTP access permission on your HA35. This allows only authorized users to access the USB storage device.

9.3.2. Accessing to FTP Server Through the User Name and

Password

1. Connect the portable storage device to the HA35's USB port.

2. Enable the FTP server. a. Log in to the web management page.


b. Choose Share > Storage Share.

Picture 9-1 share service settings c. In Service Settings, select Enable FTP for the FTP server. d. Click Save to save the settings.

Picture 9-2 share service settings 2

3. Set the user name and password of the portable storage device. a. Select User Settings configuration page. b. Click New USB user.

Picture 9-3 share user settings c. In Username and Password, enter a Username and Password for the FTP server, and re-enter the Password to confirm it. d. In Directory mode, choose a file sharing path. e. In Privilege, select the desired right.


f. Click Save to save the settings.

Picture 9-4 share user settings 2

9.3.3. Accessing a USB Storage Device Using FTP

You can access a USB storage device through the FTP server.

To access a USB storage device using FTP, connect the USB storage device to your HA35 and set the FTP login parameters.

1. Open a browser on your computer.

2. In the address box, enter ftp://192.168.1.1. Press Enter.

3. In the Login dialog box, enter the login user name and password you set in the HA35's

Storage Share page, as shown in Picture 9-1 share service settings and Picture 9-4 share user settings 2 (Anonymous users select the anonymous directly).

4. Click Login.

Once you pass the authentication, the directory and files in the USB storage device will be displayed.

9.3.4. Setting the Samba Access Permission

To prevent unauthorized users from accessing data stored in USB devices, you can set the

Samba access permission for the HA35. After this permission is set, only authorized users can access data stored in USB devices.

1. Connect the portable storage device to the HA35's USB port.


2. Enable the samba server. a. Log in to the web management page. b. Choose Share > Storage Share. c. In Service Settings, select Enable SAMBA for samba server. d. Click Save to save the settings.

Picture 9-5 FTP service settings

3. Set the user name and password of the portable storage device.

a. Select User Settings configuration page, as shown in Picture 9-6 FTP user settings .

b. Click New USB user.

Picture 9-6 FTP user settings

As shown in Picture 9-7 FTP user settings 2, In Username and Password, enter a user

name and password for the samba server, and re-enter the password to confirm it. c. In Directory mode, choose a file sharing path that is a directory. d. In Privilege, select the desired right. e. Click Save to save the settings.


Picture 9-7 FTP user settings 2

9.3.5. Accessing Data Using Samba

Using Samba, you can securely and easily access data stored in USB devices by accessing shared network directories.

You have connected a USB device to the HA35 and set its access permission.

If the access permission of the USB device is set, your identity will be authenticated. During the authentication, follow the onscreen instructions. When the authentication is successful, you will be able to access data stored in the USB device.

9.4. Configuring Multimedia Sharing

You can customize the multimedia share function. For example, you can configure the

HA35 to share only multimedia files in the specified directory.

1. Connect the USB storage device to the HA35's USB port.


3. Choose Share > Multimedia Share.

4. Select Multimedia Sharing configuration page.

5. Set Enable DMS to enable.

6. Set Customize sharing directories to enable.

7. Click New directory, select the directory in the USB storage device that you selected.

8. Click Save.


Picture 9-8 multimedia sharing

9.5. Sharing a USB Printer

HA35 supports USB printers. After you connect a USB printer to your HA35 through the

USB port, you can access the printer from the Internet or internal network.

1. Connect the USB cable of the printer to the USB port on the HA35.

2. Add a Network Printer.

9.5.1. On Windows 7

1. Choose Start > Devices and Printers.

2. Choose Add a printer.

3. Choose Add a network, wireless or Bluetooth printer.

4. Click The printer that I want isn't listed.

5. Choose Select a shared printer by name and enter the printer address in the text box.

myprinter is the customized name of the printer to add. Click Next.

6. Select the model of the printer you want or click Hard Disk to manually install the printer drive.

7. Click OK.

After you complete the preceding settings, open the files you want to print on your computer. Then you can choose the printer just installed to print your files.


10.

Maintenance Guide

10.1. Changing the IP Address Used to Log In to the Web Management Page

The IP address used to log in to the HA35 web management page is the HA35 IP address.

For security or other purposes (for instance, if the default HA35 IP address conflicts with that of another device on the same network), you can change the HA35 IP address.



3. In the navigation tree, choose LAN Interface.

4. Select LAN Interface Settings configuration page.

5. In IP address, enter a new IP address (Such as: 192.168.1.64).

6. Click Save.

Picture 10-1 change log in IP address

Use the new IP address to log in to the web management page.

10.2. Setting the DHCP Server IP range

The DHCP Server is enabled by default.




4. Select DHCP Server configuration page.

5. Enter the Start IP address and End IP address. (Such as: 2 and 254).

6. Click Save.


Picture 10-2 set the DHCP server IP addresses

10.3. RA Settings

Router Advertisement (RA) enables a neighboring computer to quickly determine whether there is an available router.




4. Select RA Settings configuration page.

5. In RA mode, choose Automatic.

6. In ULA mode, choose Disable, because there is no need to use Unique Local

Addersses (ULA), unless it is really needed in your network.

7. Click Save.


Picture 10-3 RA settings

66

10.4. IPv6 DHCP Server

If your computer supports IPv6, it can be assigned an IPv6 address by the IPv6 DHCP

Server.




4. Select IPv6 DHCP Server configuration page.

5. Set IPv6 DHCP Server to enable.

6. In Configuration mode, choose Auto-configure subnet.

7. Click Save.

Picture 10-4 IPv6 DHCP server

10.5. Changing the Web Management Page

Password

The correct password is required to log in to the web management page. Regular changes to the web management page password can effectively prevent unauthorized users from logging in and modifying important parameters.


2. Choose Maintain tab.

3. In the navigation tree, choose Account Management.

4. Select Modify Login Password configuration page.

5. Click Edit.

6. In Current password, enter the currently used password.

7. In New password, enter a new password.

8. In Confirm password, enter the new password again.

9. Click Save.


Picture 10-5 modify log in password

After the password is changed, the login page is displayed. Enter your new password to log in.

If you forget the password, you can restore the default settings by pressing and holding the Reset button on the rear panel of the HA35 for over 6 seconds. The user name and password used for logging in to the web management page are then restored to their default values. After the HA35 is restored to its default settings, all user customized data will be lost. Perform this operation with caution.

10.6. Rebooting Device

The HA35 supports reboot through the web management page.

To avoid any damage to the HA35, do not power off the HA35 when it is being rebooted.



3. In the navigation tree, choose Device Management.

4. Select Reboot configuration page.

5. Click Reboot.

6. In the displayed dialog box, click OK.

Picture 10-6 reboot

After the HA35 is rebooted, the login page is displayed. Reenter to log in.


10.7. Restoring Default Settings

10.7.1. Using the Reset Button

If you forget the login password to the web management page or could not access the web management page, use the reset button on the HA35 rear panel to restore the HA35 to its default settings. Perform this operation with caution. After the HA35 is restored to its default settings, all custom data and settings will be lost, and the password will be restored to its default value.

1. Press the HA35 power button to power the HA35 on.

2. Press and hold the reset button for 6 seconds or more.

The HA35 will restart, which will cause temporary network interruptions.

After the HA35 is restored to its default settings, change the computer IP address so that it is in the same network segment as the 192.168.1.1 default IP address.

10.7.2. Using the Configuration Tool

If the HA35 parameter settings were configured incorrectly, log in to the web management page to restore the HA35 to its default settings. Perform this operation with caution. After the HA35 is restored to its default settings, all custom data and settings will be lost, and the password will be restored to its default value.




4. Select Factory Restore configuration page.

5. Click Restore.

6. In the displayed dialog box, click OK.

Picture 10-7 restore

10.8. Upgrading Firmware

The HA35 supports firmware upgrades through the web management page. Before upgrading the firmware, please download the latest firmware of the HA35 at the Huawei's official website.

To avoid any damage to the HA35, do not power off the HA35 when it is being upgraded.





4. Select Firmware Update configuration page.

5. Click Browse..., and select the latest firmware you download at the Huawei's official website.

6. Click Upgrade.

Picture 10-8 firmware update

After the firmware is upgraded, the login page is displayed. Reenter to log in.

10.9. Using Ping Tool Diagnose Network

HA35 supports the Ping function. You can check the connection between the HA35 and other hosts (including network equipment) connection, such as the connectivity or delay between the HA35 and other hosts.



3. In the navigation tree, choose Tools.

4. Select Ping configuration page.

5. In Target address, enter the IP address or domain name you want to test.

6. Click Detect.


Picture 10-9 ping tool

10.10. Using Tracert Tool Diagnose Network

Tracert function is used to detect the number of other routers that passed when the HA35 is connected to the test host.



3. In the navigation tree, choose Tools.

4. Select Traceroute configuration page.

5. In Target address, enter the IP address or domain name you want to test.

6. Click Detect.


Picture 10-10 tracert tool

71

11.

Reference Operations

11.1. Setting Dial-Up Connection Parameters

When the HA35 works in Bridge mode you need to perform this operation. Otherwise you do not need to perform this operation.

Before setting dial-up connection parameters, verify that the HA35 is correctly connected to your computer and you have the dial-up connection account name and password provided by your Internet service provider (ISP). This section demonstrates how to set up a Point-to-

Point Protocol over Ethernet (PPPoE) connection on Windows.

On Windows 7

1. Choose Start > Control Panel > Network and Internet > Network and Sharing

Center.

Picture 11-1 network and sharing center

2. Under Change your networking settings, click Set up a new connection or network.

Picture 11-2 change your networking settings

3. In the Set Up a Connection or Network window, select Connect to the Internet and click Next.


Picture 11-3 set up a connection or network

4. Click Broadband (PPPoE).


Picture 11-4 connect to internet

73

5. In User name and Password, enter the dial-up connection account name and password provided by your ISP. In Connection name, name the dial-up connection.

Select or deselect Allow other people to use this connection. Then click Connect.

Picture 11-5 connect to internet 2

6. Return to the Network and Sharing Center page. Click Change adapter settings.

Right-click the icon for the dial-up connection you just set up and choose Create

Shortcut from the shortcut menu. In the displayed dialog box, click Yes.

Picture 11-6 create shortcut

After you successfully set up a PPPoE connection, a dial-up connection icon is displayed on your computer desktop.

To connect to the Internet, double-click the dial-up connection icon. In the displayed dialog box, click Connect.


11.2. Enabling Wireless Configuration on

Windows

If the setup of the wireless connection between your computer and the HA35 failed, verify that wireless configuration is enabled on Windows.

On Windows 7 or Windows Vista

1. Right-click Computer and choose Manage from the shortcut menu.

2. In the left panel of the Computer Management window, choose Computer

Management (Local) > Services and Applications > Services.

3. In the right panel of the Computer Management window, right-click WLAN

AutoConfig and choose Properties from the shortcut menu.

4. In the displayed dialog box, check that Service status is Started.

5. Click OK to close the dialog box. Then close the Computer Management window.

11.3. Checking the Computer MAC Address

The MAC address, also known as the physical address, is a unique identifier assigned to a network adapter. A MAC address contains six groups of two hexadecimal digits, such as

2C-41–38–8D-75–8D. This section demonstrates how to check your computer's MAC address.

On Windows 7

1. Choose Start > Control Panel > Network and Internet > Network and Sharing

Center > Change adapter settings. Right-click Local Area Connection and choose

Status from the shortcut menu.



75

2. Click Details.

Picture 11-8 local area connection details

3. In Network Connection Details, find the line similar to Physical Address 70-F3–95–

0C-49–4E. The 70-F3–95–0C-49–4E string is your computer's MAC address.


Picture 11-9 physical address

76

12.

FAQs

12.1. What Can I Do If I Cannot Open the Web

Management Page?

1. Open Internet Explorer. Choose Tools > Internet Options > Connections > LAN

settings, and ensure that all check boxes are deselected.

2. Check that the computer IP address is 192.168.1.*. (* is any integer from 64 to 253.)

3. Check that the cables are securely connected to the HA35.

If the problem persists, restore the HA35 to its default settings.

12.2. What Can I Do If the HA35 Cannot Access the Internet through a Wireless Network

Adapter Sometimes or If the WLAN

Connection Is Unsteady?

This is probably because the HA35 has its cables connected loosely, is placed too close to electronic appliances with intensive interference, or is too far from the computer. Verify that:

1. The power and telephone cables are correctly connected to the HA35.

2. Your computer and the HA35 are far from electric appliances that generate strong magnetic or electric fields, such as microwave ovens, refrigerators, and cordless telephones.

3. The HA35 is in an open area, and there are no obstacles, such as concrete or wooden walls, between the HA35 and the computer.

4. The HA35 is close to the computer.

5. The angle between the HA35 and the computer is appropriate.

Do not use the HA35 during thunderstorms, as the signal strength may be unsteady and the HA35 itself may be damaged due to lightning strikes.

12.3. What Can I Do If I Cannot Access the

Internet?

1. Check that the Power indicator on the HA35 is steadily on. If the Power indicator is off, perform further checks as follows: a. Check that the HA35 is turned on. b. Check that electricity comes from the socket and that the power input from the socket meets the requirements described on the label of the HA35's power adapter. If the


voltage is unstable, for example, if the voltage is too high or too low, do not use the

HA35. Wait until the voltage recovers, and then use the HA35. c. Check that the HA35 is securely connected to the socket using its power adapter.

If the Power indicator is still off, contact an authorized maintenance center.

2. After powering on the HA35, wait for about 3 minutes. Then check whether the DSL indicator turns steadily on. a. Check that the telephone line is correctly and securely connected, especially the connection between the telephone line and the splitter. b. Check that the HA35 and telephone line are located far from any electric appliances that generate strong magnetic or electric fields. Replace the telephone line when necessary.

If the DSL indicator is still off, contact your network service provider.

3. Check whether the LAN indicator is on. If the LAN indicator is off, perform further checks as follows: a. Check that the network adapter on your computer is enabled. b. Check that the network cable between the HA35 and the computer is securely connected. Remove and then insert the network cable or replace the network cable when necessary.

If the LAN indicator is still off, contact an authorized maintenance center.

4. Check that the driver for the network adapter is correctly installed. The following example uses a computer running the Windows XP operating system to check whether the driver for the network adapter is installed: a. Right-click My Computer, and choose Manage from the displayed shortcut menu. b. In the Computer Management window, click Device Manager. c. In the right pane of the Computer Management window, click Network adapters.

If no network adapter is found or if a question mark (?) or an exclamation mark (!) is displayed next to the network adapter icon, the driver for the network adapter is not correctly installed. Re-install the driver.

5. Check that PPP dial-up software is installed and parameters are set correctly. For details about parameter settings, see the user guide for the PPP dial-up software.

6. Check that you have entered the correct user name and password required by the PPP dial-up software. The user name and password are provided by your network service provider.

7. Check that you can use the PPP dial-up software to set up dial-up connection. If the dial-up connection fails, perform further checks as follows: a. Close the PPP dial-up software, and power off the HA35. After 5 minutes, power on the HA35, and use the PPP dial-up software to dial again. b. Restore the HA35 to its default settings.

If the problem persists, contact your network service provider.


8. Check that the proxy server of the browser is correctly configured. The following example uses Internet Explorer on the Windows XP operating system to check whether the proxy server of the browser is correctly configured: a. Launch Internet Explorer. b. Choose Tools > Internet Options. c. In the Internet Options dialog box, click the Connections tab. d. In the Local Area Network (LAN) settings area, click LAN Settings. e. In the Proxy server area of the Local Area Network (LAN) Settings dialog box, check that the Use a proxy server for your LAN (These settings will not apply to

dial-up or VPN connections). check box is cleared.

9. Try to access more websites to check whether the HA35 can access these websites. If the problem persists, contact your network service provider.

12.4. I Often Need to Restart the HA35 to Display

Web Pages. What Can I Do?

Verify the following:

1. Cables are securely connected to HA35 ports. Otherwise, network stability may suffer.

2. Your computer and the HA35 are far from electric appliances that generate strong magnetic or electric fields, such as microwave ovens, refrigerators, and cordless telephones.

If the problem persists, contact your Internet Service Provider.

12.5. What Is the Difference Between Wireless

MAC Address Filtering and MAC Address

Filtering?

•

Wireless MAC address filtering: controls whether a computer can connect to the HA35 over the WLAN.( Please re

fer to page 41)

•

MAC address filtering: controls whether a computer connected to the HA35 can access

the Internet. ( Please refer to page 42)

12.6. Can I Change the WLAN Password?

Yes. To improve your WLAN security, regularly change your WLAN password.


13.

Appendix

13.1. Technical Specifications

Item

Power supply

Power consumption

Ambient operating temperature

Ambient humidity

Dimensions (H x W x D)

Specifications

12 V DC, 2.5 A

< 13 W

0°C to 40°C

Weight

DSL standard

5% to 95% RH (non-condensing)

160.8 mm x 255.5 mm x 50 mm (6.33 in. x 10.06 in. x

1.97 in.), antenna excluded

About 512 g

ADSL standard

ADSL2 standard

ITU G.992.1（G.dmt）

ITU G.992.3

ITU G.992.5

ITU G.992.3

（G.dmt.bis）

ADSL2+ standard

VDSL2

Wireless transmission rate 802.11b

USB type

802.11g

802.11n (2T2R antenna technology)

USB 2.0

ITU G.992.5

（G.dmt.bitplus）

ITU G.993.2 VDSL2

VDSL2 Profiles for 8a,

8b, 8c, 8d, 12a, 12b,

17a

VDSL Vectoring

Up to 11 Mbit/s

Up to 54 Mbit/s

Up to 300 Mbit/s


Table 13-1 technical specifications

80

13.2. Default Settings

Parameter

LAN port IP address

LAN port subnet mask

User name to log in to the web configuration page

Password to log in to the web configuration page

WLAN name

WLAN password

DHCP

WLAN

Default Value

192.168.1.1

255.255.255.0 admin

Labeled on the product cover



Supported

Supported

Table 13-2 default settings


14.

For More Help

Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.


15.

Legal Notice

Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.

No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").

The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders.

Trademarks and Permissions

, , and

Technologies Co., Ltd.

are trademarks or registered trademarks of Huawei

Wi-Fi

®

, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

Other trademarks, product, service and company names mentioned may be the property of their respective owners.

Notice

Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers.

Thus, the descriptions herein may not exactly match the product or its accessories which you purchase.

Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability.

DISCLAIMER

ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED

BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN

RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL

HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA,

GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH

LOSSES ARE FORSEEABLE OR NOT.

THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR

PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A

LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN


THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE

PURCHASE OF THIS PRODUCT.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

Privacy Policy

To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy.


16.

Acronyms and Abbreviations

QoS

RA

SIM

SIP

SYN

TCP

LTE

MIMO

MLD

PC

PIN

PPP

PSTN

PVC

DSL

FTP

HTTP

IEEE

ICMP

IGMP

IP

LAN

ACL

ADSL

ADSL2+

ARP

DC

DHCP

DMZ

DNS

Access Control List

Asymmetrical Digital Subscriber Line

Asymmetrical Digital Subscriber Line 2 plus

Address Resolution Protocol

Direct Current

Dynamic Host Configuration Protocol

Demilitarized Zone

Domain Name System

Digital Subscriber Line

File Transfer Protocol

Hyper Text Transport Protocol

Institute of Electrical and Electronics Engineers

Internet Control Message Protocol

Internet Group Management Protocol

Internet Protocol

Local Area Network

Long Term Evolution

Multiple-input Multiple-output

Multicast Listener Discovery

Personal Computer

Personal Identification Number

Point-to-Point Protocol

Public Switched Telephone Network

Permanent Virtual Circuit

Quality of Service

Router Advertisement

Subscriber Identity Module

Session Initiation Protocol synchronous

Transmission Control Protocol


UMTS

URL

USB

VDSL2

VoIP

WAN

WCDMA

WLAN

WPA

WPS

Universal Mobile Telecommunications System

Uniform Resource Locator

Universal Serial Bus

Very High Speed Digital Subscribe Line 2

Voice over IP

Wide Area Network

Wideband Code Division Multiple Access

Wireless Local Area Network

Wi-Fi Protected Access

Wi-Fi Protected Setup


17.

List of Pictures

Picture 1-1 ports and buttons ..................................................... 7

Picture 1-2 front side .................................................................. 8


(PSTN Line) ............................................................................. 12


(ISDN Line) .............................................................................. 13


(intervention of an electrician in the internal home wiring) ...... 14


(PSTN Line) ............................................................................. 15


(ISDN Line) .............................................................................. 16


(with the intervention of electrician in the internal wiring) ........ 17

Picture 2-7 connect devices in 3G/4G network ....................... 18

Picture 3-1 local area connection ............................................ 20

Picture 3-2 wireless network connection properties ................ 21

Picture 3-3 internet protocol version 4 properties .................... 21

Picture 3-4 local area connection ............................................ 22

Picture 3-5 wireless network connection properties ................ 22

Picture 3-6 internet protocol version 4 properties .................... 23

Picture 3-7 log in to the Web Management Page .................... 23

Picture 3-8 account management ............................................ 24

Picture 3-9 home ..................................................................... 24

Picture 3-10 set internet connection ........................................ 25


Picture 3-11 set SSID and key ................................................. 25

Picture 3-12 internet settings ................................................... 26

Picture 3-13 internet settings 2 ................................................ 26

Picture 3-14 3G/4G vlan .......................................................... 27

Picture 3-15 set PIN ................................................................. 27

Picture 3-16 bonding tunnel ..................................................... 27

Picture 3-17 home ................................................................... 28

Picture 3-18 set internet connection ........................................ 28

Picture 3-19 set SSID and key................................................. 29

Picture 3-20 internet settings ................................................... 29

Picture 3-21 internet settings 2 ................................................ 30

Picture 3-22 3G/4G vlan .......................................................... 30

Picture 3-23 set PIN ................................................................. 30

Picture 3-24 set SSID and key................................................. 31

Picture 3-25 home ................................................................... 32

Picture 3-26 network status ..................................................... 33

Picture 4-1 connect Wi-Fi ........................................................ 34

Picture 4-2 Wi-Fi key ............................................................... 34

Picture 4-3 Wi-Fi connected .................................................... 34

Picture 5-1 WLAN basic settings ............................................. 35

Picture 5-2 WLAN Encryption .................................................. 36

Picture 5-3 WLAN Advanced Settings ..................................... 36



Picture 6-3 WPS by push button.............................................. 39

Picture 6-4 WPS by client PIN ................................................. 39


Picture 6-5 WPS by AP-PIN ..................................................... 40

Picture 6-6 WLAN access rules ............................................... 41

Picture 6-7 WLAN access rules 2 ............................................ 41

Picture 6-8 parental control ...................................................... 42

Picture 6-9 time rules ............................................................... 42

Picture 6-10 time rules ............................................................. 43

Picture 6-11 URL filter .............................................................. 43

Picture 6-12 URL filter .............................................................. 44

Picture 6-13 URL filter – block a device ................................... 44

Picture 6-14 firewall ................................................................. 46

Picture 6-15 ACL ...................................................................... 47

Picture 6-16 ACL 2 ................................................................... 47

Picture 6-17 DMZ ..................................................................... 48

Picture 6-18 application filter ................................................... 49

Picture 6-19 application filter 2 ................................................ 49

Picture 6-20 application filter 3 ................................................ 50

Picture 6-21 port mapping ....................................................... 51

Picture 6-22 port mapping 2 .................................................... 51

Picture 6-23 port trigger ........................................................... 52

Picture 6-24 port trigger 2 ........................................................ 52

Picture 7-1 dynamic DNS ........................................................ 53

Picture 7-2 dynamic DNS 2 ..................................................... 54

Picture 7-3 simple network time protocol ................................. 55

Picture 7-4 multicast management .......................................... 56

Picture 8-1 VoIP providers ....................................................... 57

Picture 8-2 VoIP providers 2 .................................................... 57


Picture 8-3 VoIP accounts ....................................................... 58

Picture 8-4 telephone ............................................................... 58

Picture 9-1 share service settings ........................................... 60

Picture 9-2 share service settings 2 ........................................ 60

Picture 9-3 share user settings ................................................ 60

Picture 9-4 share user settings 2 ............................................. 61

Picture 9-5 FTP service settings .............................................. 62

Picture 9-6 FTP user settings .................................................. 62

Picture 9-7 FTP user settings 2 ............................................... 63

Picture 9-8 multimedia sharing ................................................ 64

Picture 10-1 change log in IP address ..................................... 65

Picture 10-2 set the DHCP server IP addresses ..................... 66

Picture 10-3 RA settings .......................................................... 66

Picture 10-4 IPv6 DHCP server ............................................... 67

Picture 10-5 modify log in password ........................................ 68

Picture 10-6 reboot .................................................................. 68

Picture 10-7 restore ................................................................. 69

Picture 10-8 firmware update................................................... 70

Picture 10-9 ping tool ............................................................... 71

Picture 10-10 tracert tool ......................................................... 71

Picture 11-1 network and sharing center ................................. 72

Picture 11-2 change your networking settings ......................... 72

Picture 11-3 set up a connection or network ........................... 73

Picture 11-4 connect to internet ............................................... 73

Picture 11-5 connect to internet 2 ............................................ 74

Picture 11-6 create shortcut ..................................................... 74


Picture 11-7 local area connection ........................................... 75

Picture 11-8 local area connection details ............................... 76

Picture 11-9 physical address .................................................. 76


18.

List of Tables

Table 1-1 ports and buttons ....................................................... 8

Table 1-2 indicators .................................................................. 10

Table 3-1 connected devices to the HA35 router..................... 32

Table 6-1 firewall ...................................................................... 45

Table 13-1 technical specifications .......................................... 80

Table 13-2 default settings ....................................................... 81


No results