Sony PCV-RZ series Personal Computer User manual

Sony VAIO Desktop

User Guide

P C V - R Z s e r i e s / P C V - 1 1 1 6

N

Read this first

n

N

1

Read this first

Notice

© 2003 Sony Corporation. All rights reserved.

This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machinereadable form without prior written approval.

Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual, the software or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the software, or other information contained herein or the use thereof.

Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user licence agreement.


n

N

2

Trademarks

Sony, DVgate, Giga Pocket, i.LINK and the i.LINK logo, MovieShaker, PictureGear Studio, PicoPlayer, Network Smart Capture, SonicStage,

Sony Style Imaging, UI Design Selector, VAIO Action Setup, VAIO Edit Components, VAIO System Information, Memory Stick and the

Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation.

i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394 connection.

Microsoft, Windows and the Windows logo are trademarks or registered trademarks of U.S. Microsoft Corporation in the U.S. and other countries.

StarOffice is a trademark or registered trademark of Sun Microsystems, Inc. in the United States and in other countries.

Adobe, Adobe Acrobat Reader, Adobe Premiere and Adobe Photoshop Elements are trademarks of Adobe Systems Incorporated.

QuickTime and the QuickTime logo are trademarks used under licence. QuickTime is registered in the U.S. and other countries.

RealOne Player is a trademark or registered trademark of RealNetworks, Inc. in the U.S. and other countries.

Symantec Norton Antivirus is a trademark of Symantec.

Click to DVD is a trademark of Sony Electronics.

EverQuest is a registered trademark of Sony Computer Entertainment America Inc.

RecordNow is a trademark or registered trademark of VERITAS.

All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or

®

marks are not specified.

Specifications are subject to change without notice.


n

N

3

E

NERGY

S

TAR

®

As an E NERGY S TAR

®

Partner, Sony has determined that this product meets the E NERGY S TAR

®

guidelines for energy efficiency. The

International Energy Star

®

Office Equipment Program is an international program that promotes energy saving through the use of computers and their office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles and copiers. Their standards and logos are uniform among participating nations.

E NERGY S TAR is a U.S. registered mark.

Environmental information

Halogenated flame retardant is not used in cabinets.

Cushions formed by corrugated board are used in packaging.


n

N

4

Safety information

Warnings

❑

❑

❑

❑

❑

❑

❑

❑

General

❑ Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Opening the unit, for whatever reason, could lead to damages that are not covered by the guarantee.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

To prevent fire or shock hazard, do not expose your VAIO desktop to rain or moisture.

If reporting a gas leak, do not use the modem or a telephone in the vicinity of the leak.

Avoid using the modem during a severe electrical storm.

The power socket outlet you are using must be installed near the equipment and must be easily accessible.

Do not move your computer while the system is in Standby mode.

The magnetic properties of some objects can have serious consequences for your hard disk drive. They can erase the data on the hard disk drive and cause the computer to malfunction. Do not place your computer near or on any objects, which emit magnetic fields, mainly:

❑

❑

TV sets

Speakers

❑

❑

Magnets

Magnetic bracelets.

Audio/video

❑ Audio and picture distortion may occur if this equipment is positioned in close proximity to any equipment emitting electromagnetic radiation.


n

N

5

❑

❑

❑

❑

❑

Connectivity

Never install modem or telephone wiring during a severe lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

Be cautious when installing or modifying telephone lines.

To disconnect your VAIO desktop completely from the mains voltage, unplug the power cable.

Make sure that the socket outlet is easily accessible.

Optical disc drive

The use of optical instruments can cause eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt any disassembling process. For servicing, refer to qualified personnel only.

There is visible and invisible radiation when the optical disc drive is open: avoid direct exposure to the laser beam. The disc drives are classified as CLASS 1 LASER PRODUCTS and comply with the Laser Product Safety Standard EN 60825-1. Repair and maintenance only by authorised Sony technicians. Improper repairs and use can create safety hazards.

CLASS 1

LASER PRODUCT

TO EN 60825-1


n

N

6

Regulatory information

Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of European

Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive).

Declaration of Conformity

The European Union is targeting the free movement of goods for the internal market and to prevent technical barriers to trade. This effort has resulted in several EU Directives asking that manufacturers make their products comply with essential standards.

Manufacturers are required to affix the "CE" mark on the products they sell and to draw up a "Declaration of Conformity" (DoC).

Primarily, the Declarations of Conformity are intended for the market surveillance authorities as proof that products satisfy the required standards. Additionally, Sony provides these EU DoC's on the website http://www.compliance.sony.de

as a service to our customers.

You can search for all Declarations of Conformity available for a specific product by typing in the model name in the search box. A list of matching documents will be displayed and can be downloaded. Please note that the availability of declarations depends on the scope of the EU Directives and the individual product specifications.

This product complies with EN 55022 Class B and EN 55024 for use in the following areas: residential, commercial, and light industrial.

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables not longer than 3 metres (9.8 feet).

Before activating the built-in modem, please read the Modem Regulations leaflet.


n

N

7

Disposing of the internal memory backup battery

Your Sony VAIO desktop is equipped with an internal back-up memory battery that should not have to be replaced during the lifetime of the product. If you want to replace the battery, please contact VAIO-Link: http://www.vaio-link.com

❑

❑

Keep away from children.

Dispose of the battery properly at its end-of-life.

❑ In some areas the disposal of non-hazardous batteries in household or business waste may be prohibited.

Please use the public waste collection system.

Welcome

n

N

8

Welcome

❑

❑

❑

❑

Congratulations on purchasing a Sony VAIO desktop. Sony has combined leading-edge technology in audio, video, computing and communications to provide you with state-of-the-art personal computing.

Here are the main features you will be able to enjoy:

❑

❑

❑

❑

❑

Exceptional performance - Your PC includes a fast processor, an internal modem, and a fast Ethernet interface.

Dual drives – Enjoy the freedom of two drives; your desktop model has both a DVD±RW and a

DVD-ROM drive.

Sony audio and video quality – The advanced graphics card and high-quality external stereo speakers enable you to take advantage of today’s advanced multimedia applications, games, and entertainment software.

Multimedia features – Enjoy audio and video CDs and DVDs.

Giga Pocket - Take advantage of the new Giga Pocket technology, allowing you to watch TV and record your favourite programs digitally and by remote control.

Sony Memory Stick™ slot – The next generation in digital storage allows you to easily transfer images, sounds, data and text between cameras, computers, and more.

VAIO keyboard - Featuring power-on capabilities and shortcut keys to launch your favourite applications within seconds.

Interconnectivity – Your computer has Memory Stick™, USB 2.0, and i.LINK™ functionalities.

Windows

®

XP Home Edition Service Pack 1 - Your system includes the latest consumer operating system from Microsoft.

Welcome

n

N

9

❑ Excellent customer support - If you are experiencing any problems with your computer, please check the VAIO-Link website for a possible solution: http://www.vaio-link.com

Before contacting VAIO-Link, please try to solve the problem by reading this guide, especially the section

Troubleshooting (page 75) or the manuals and help files for the peripherals or software.

Documentation pack

Your documentation pack contains printed user guides, as well as user guides delivered on a documentation CD-ROM.

Printed documentation

❑

❑

❑

The printed part of your documentation pack includes the following:

❑

❑

❑

❑

A Getting Started brochure, where you will find a brief description of the items in your box and how to set up your computer;

A Specifications sheet, containing a table of specifications, a list of software, illustrations showing the connectors, and a guide to setting up your computer.

A Troubleshooting Guide, where you will find all the basic information to start using your VAIO desktop, as well as troubleshooting and VAIO-Link information;

An Application CD Guide, which explains the purpose and use of the final system recovery CD. Use this when (re)installing bundled software.

Your Sony Guarantee conditions;

A Safety Regulations Guide for your information;

A Modem Regulations leaflet applying to the modem.

Welcome

n

N

10

Online documentation

The online documentation includes the following guides:

1 The Sony VAIO Desktop User Guide:

❑

❑

Using your VAIO desktop shows you how to use the standard components of your system. In this part of the manual you can also find out what you can do with a Memory Stick™.

Connecting peripheral devices explains how you can add functionality by connecting various peripherals.

❑

❑

❑ Glossary refers to terms used in this manual.

2 The Software Guide:

❑

Getting help explains the support options available to you, and offers basic troubleshooting tips.

Precautions provides facts and advice about using your VAIO desktop.

❑

About the Software is a short description of the features of the software delivered with your system.

Using Video software explains how to use Sony video software: DVgate, MovieShaker and

Network Smart Capture.

❑

❑

❑

❑

❑

Managing audio files with SonicStage describes how to convert your existing MP3, WMA and

WAV format audio files into ATRAC3 format.

Using PictureGear Studio explains how to get the most enjoyment out of your photo and movies taken with a digital camera.

Using Click to DVD explains the procedures for creating your own DVDs.

Customising your VAIO computer explains how to set up your system's display and so on.

❑

Installing and updating applications details how to install, run or uninstall a software application.

Managing drivers describes how to install, update or uninstall a driver.

Welcome

n

N

11

❑ Using the Product Recovery CD-ROMs explains how to perform a system and application recovery.

3 The Giga Pocket manual explains how to watch and record TV and video on your PC.

4 In the Customer Service Guide, you will find all the information you need relating to VAIO-Link, including contact numbers for each country.

5 Consult the Online Help files of the software you are using for detailed information on features and troubleshooting.

6 Refer to the Microsoft

®

Quick Start manual for more information on Windows

®

.

Welcome

Your Sony VAIO desktop and its accessories

The following hardware items are in the box:

n

N

12

3

4

1

2

5

Main unit

VAIO keyboard with palmrest

Stereo speakers

VAIO optical wheel mouse

Infrared receiver (for remote control)

7 Power cable

8 Phone cable

9 Phone plug adapter (country-specific)

10 TV-Out cable

11 Documentation pack with CD-ROM

6 Remote control 12 Product recovery CD-ROMs

✍

The phone cable and plug adapter are used to connect the internal modem.

Welcome

n

N

13

Ergonomic considerations

Whenever possible, try and take into account the following ergonomic considerations when using your new computer, whether at home or in the office:

Welcome

n

N

14

❑

❑

❑

❑

❑

❑

Position of the keyboard and mouse – Place the keyboard directly in front of you (1). Keep your forearms horizontal, with your wrists in a neutral, comfortable position (2) while using the keyboard or mouse – not at an angle. Let your upper arms hang naturally at your sides. Use the palm rest only briefly, to relax your wrists when you are not typing. Place the mouse at the same level as the keyboard and use your whole arm to move it.

Position and viewing angle of the monitor – Set the display at a comfortable viewing distance (3).

Make sure the display screen is at eye level or slightly lower. Use the display’s tilting feature, if available, to find the best position. You can reduce eye-strain and muscle-fatigue by adjusting the tilt of the display to the proper position. Remember to adjust the brightness setting of the display. If you are using a CRT monitor, make sure that the refresh rate is at an optimal level, that is, at least 75Hz.

Furniture and posture – Sit in a chair with good back support (4). Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning too far backwards.

Lighting – Choose a location where windows and lights do not create glare or reflection on the display.

Use indirect lighting to avoid bright spots reflecting on the display. You can also purchase accessories for your display that help reduce glare. Proper lighting adds to your comfort and work effectiveness.

Ventilation – Make sure you leave at least 25 cm of space behind and on the left of the main unit (5).

And finally – Remember to have breaks during sessions with your computer. Excessive use of the computer may strain muscles or tendons.

Using your VAIO desktop

n

N

15

Using your VAIO desktop

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

❑

This section describes how to start using your computer and how to use your computer’s internal and external devices.

Locating connectors (page 15)

Starting your computer (page 16)

Shutting down your computer (page 17)

Using the keyboard (page 18)

Using the shortcut keys (page 23)

Setting up the monitor (page 24)

Using the TV function (page 25)

Using the remote control (page 28)

Using the optical mouse (page 33)

Using the DVD drives (page 34)

Using the floppy disk drive (page 38)

Using the modem (page 40)

Expansion capabilities (page 41)

Using the Memory Stick™ (page 42)

Using PC Cards (page 52)

Using power saving modes (page 55)

Locating connectors

Please see the printed Specifications sheet to identify connectors on your model.


n

N

16

Starting your computer

Once you have all the components set up as described in the Getting Started guide, you can begin to use your computer.

To start up your computer, proceed as follows:

1 Press the power button on your monitor to turn the display on (1).

2 Press the power button on the system unit until the blue power indicator light turns on (2).

3 Push the power button on the speakers to turn the sound on (3).

✍

If you press the power button for more than four seconds, the computer will switch itself off.


n

N

17

Shutting down your computer

It is important that you shut down your computer properly so you do not lose unsaved data.

To shut down your computer, proceed as follows:

1 Click the Start button.

2 Click Turn Off Computer.

The Turn off computer screen appears.

3 Click Turn Off.

Wait for your computer to turn off automatically.

The power indicator turns off.

4 Turn off any peripherals connected to your computer.

✍

Respond to any prompts warning you to save documents or to consider other users.

If you are unable to shut down your computer;

- Close all software in use.

- Disconnect any USB devices.

- Press <Ctrl>+<Alt>+<Delete> at the same time. If you have not changed the default setting, you will enter the Task Manager. Select Turn

Off from the Shut Down menu to turn the computer off.

Alternatively, press <Alt>+<F4> and select Turn Off from the screen that appears.

If this does not work, you can press the power button for more than four seconds. This will shut down the computer. This operation may result in loss of data.

If you want to shut down the computer for a short period only, you can save power by using the Standby mode. Go to Start, Turn Off Computer,

and select Stand By (see Using power saving modes (page 55) for details).


Using the keyboard

This section describes the features of the VAIO keyboard.

★

Tip: Your keyboard has an ergonomic design. You can put it in an upward position on its backside to save space on your desk.

n

N

18

MAIL

S1

INTERNET

S2

MUSIC

S3

PICTURE

S4

VIDEO

S5

HELP

S6

Num Lock Caps Lock Scroll Lock

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Esc

¬

` ¦

Caps

Lock

!

1

Q

"

2

W

£

3

E

$

4 !

R

%

5

T

^

6

Y

&

7

U

*

8

I

(

9

O

)

P

-

_

{

[

A S D F G H J K L

;

:

´

@

+

=

}

]

~

#

\

| Z X C V B N M <

, .

>

/

?

Ctrl Fn Alt Ctrl Alt Gr

PgUp

Home PgDn End

Delete Insert

Prt Sc

Sys Rq

Pause

Break

NumLk

CapsLk

7

Home

4

/

8

5

1

End

0

Ins

2

*

9

PgUp

6

-

+

3

PgDn

.

Del

Enter


n

N

19

Keys

Escape key (1)

Function keys (2)

Correction keys (3)

Lock keys (4)

Print Screen key (5)

Numeric keypad area (6)

Navigation keys (7)

Application key

Operator keys (9)

(8)

Windows

® key (10)

Shortcut keys (S Keys) (11)

Descriptions

The <Esc> (Escape) key is used to cancel commands.

The twelve function keys along the top of the keyboard are used to perform designated tasks.

For example, in many applications, <F1> is the Help key. The task associated with each function key may vary from one application to another.

The <Insert>, <Back Space> and <Delete> keys enable you to make corrections when typing.

Press <Caps Lock> once to activate the uppercase characters. Use the <Num Lock> key to activate the numerical keypad.

The <Prt Sc> key takes an electronic snapshot of the screen and moves it to the Windows

®

Clipboard. You can then paste the screenshot into a document and print it.

This contains the keys found on a typical calculator. Use the numeric keypad area to type numbers or to perform mathematical calculations such as addition and subtraction. Note that you must press the <Num Lock> key to activate the keypad.

These keys enable you to move the cursor on the screen.

The <Application> key displays a shortcut menu; pressing this key is equivalent to clicking the right mouse button.

Several keys are used in combination with at least one other key: <Ctrl>, <Alt> and <Shift>.

When held down at the same time as another key, the <Ctrl> (Control) and <Alt> (Alternate) keys offer another way to execute commands. For example, in many applications, instead of choosing the Save command from a menu, you can hold down <Ctrl> and press <S> (referred to as <Ctrl>+<S>). The <Shift> key is used to type capital letters or special symbols such as @ and $.

The key with the Windows

®

logo displays the Windows

®

Start menu; it is equivalent to clicking the Start button on the taskbar.

You can use these buttons, numbered 1 to 6, to launch straight into assigned applications.


n

N

20

Keys Descriptions

Indicator LEDs (12)

Standby button (13)

A green light indicates whether the Caps Lock, Num Lock, and Scroll Lock functions are active.

Press this button either to start up your computer, or to enter Standby mode, or to resume from a power saving mode.

<Fn> combination keys (14) These keys are used in combination with the <Fn> key to execute the commands depicted within the box on the key.

<Fn> key (15) The <Fn> key is used in combination with 5 other keys to execute certain commands.


Combinations and functions with the Windows

®

key

Combinations

+ <F1>

Function

Displays Windows

®

Help and Support Center.

+ <Tab>

+ <D>

+ <E>

+ <F>

+ <Ctrl> + <F>

+ <L>

+ <M>

<Shift> +

+ <R>

+ <M>

+ <U>

Switches the selected button on the taskbar.

Refreshes the screen if a window is not closing as it should.

Displays My Computer.

Displays the Search Results window to find a file or folder.

This is equivalent to selecting Search from the Start menu.

Displays the Search Results - Computers window where you can locate other computers.

Locks your computer.

Minimises all displayed windows.

Returns all minimised windows to their previous size.

Displays the Run window. This is equivalent to selecting Run from the Start menu.

Launches the Windows

®

Utility Manager.

n

N

21


Combinations and functions with the <Fn> key

Combinations/ Feature Functions

Moves the view to the next page down.

<Fn> +

PgDn

Moves the view to the previous page up.

<Fn> +

PgUp

Moves the cursor to the beginning of the line.

<Fn> + Home

Moves the cursor to the end of the line.

<Fn> + End

Changes the way in which you can scroll the screen, depending on the application.

<Fn> +

ScrLk

n

N

22


n

N

23

Indicators

Light

Num Lock

Caps Lock

Scroll Lock

On Off

Turns on when the number keys in the numeric keypad are active.

Turns off when the alphanumeric character keys in the keypad area are active.

Turns on when the letters appear in uppercase as you type. The <Shift> key lowers the case of typed letters when Caps Lock is on.

Turns off when the letters appear in lowercase as you type (unless you hold down the <Shift> key).

Turns on when the screen scrolls differently (not all applications support this function).

Turns off when the information moves across the display normally.

Using the shortcut keys

Press a shortcut key (<S> Key) to start your favourite software without having to click the shortcut icon on the desktop.

Use an <S> Key simply by pressing it.

If you want to, you can use VAIO Action Setup to change the functions of the <S> Keys. All six buttons are reprogrammable.

The programmable <S> Keys come with the following applications as their default settings (this may vary):

S1 — Outlook Express

S2 — Internet Explorer

S3 — SonicStage

S4 — PictureGear Studio

S5 — Giga Pocket

S6 — Help and Support Center


n

N

24

Setting up the monitor

If your VAIO desktop is delivered with a monitor, it may be delivered with a digital 15" or 17'' LCD (XGA TFT) monitor or with a common analogue CRT monitor, depending on your model and vendor.

For more information on how to use your delivered monitor, refer to the user manual that came with it.

You can also refer to the section Connecting an external display (page 60)

.

Connecting the monitor

To connect your monitor, proceed as follows:

1 Plug one end of the monitor cable into the back panel of your computer.

2 Plug the other end of the monitor cable into the back of your monitor.

The monitor is now ready for use.

✍

There are two ports: one for DVI screens and one for common VGA and CRT screens. Make sure you are using the appropriate connector.


n

N

25

Using the TV function

❑

❑

❑

❑

❑

❑

❑

For details on using Sony’s Giga Pocket software, please see the dedicated online guide.

Your computer has been equipped with a TV-tuner board. In combination with Sony's Giga Pocket software, it allows you to:

❑ Watch, record and play back analogue broadcasted cable and terrestrial TV-programs, all by remote control;

Digitise analogue video and audio using the S-Video or composite and audio inputs;

Manage your video units (capsules), preview them and create multiple folders;

Set up a timer to record channels at a repeated time;

Suspend viewing TV (time-shifting);

Stream your recorded TV contents via Ethernet (or WLAN) to connected PCs;

Export your video capsules to MPEG2, MPEG1 and DVI-AVI-files;

View recorded clips on client PCs located in other rooms using PicoPlayer.

Copyright protection

People who create artistic works such as music are entitled to a "copyright", meaning that they have exclusive rights to dictate how their work is used. When they are created, artistic works are automatically protected by a copyright without having to submit notification or registration, and may not be used without the permission of the person who created the work.

This product incorporates copyright protection technology that is protected under Macrovision Corporation and other rights owners, meaning you cannot record materials protected by copyright. Music and films etc. that you record at home are for personal use only.


Starting to use Giga Pocket

The following ports are located on the back of your desktop:

n

N

26

3

4

1

2

5

Right audio-in channel

Left audio-in channel

Video-in

S-Video-In port

Antenna-in port


n

N

27

To connect terrestrial or cable TV to your computer, proceed as follows:

1 Plug one end of your antenna cable / cable-TV cable (not supplied) into the Antenna port (5) on the back of the computer.

2 Plug the other end in the TV wall socket.

To connect an external video/audio source (such as a video camera, VCR or DVD player), proceed as follows:

1 Connect your video/audio device’s video cable to the S-Video (4) or Video-in port (3), depending on the type of cable supplied with the external device.

If the video source has both a composite and an S-Video output, you are recommended to use the

S-Video output as this will result in higher quality video.

2 Connect the left and right audio cables into the right (1) and left (2) audio channel ports.

✍

Please note relevant directions with regards to TV licensing regulations in your own country.


n

N

28

Using the remote control

Your VAIO comes with a remote control with which you can control Giga Pocket, SonicStage and PowerDVD for VAIO. Before you can use the remote control, you must insert two AA alkaline batteries and connect the infrared receiver.

Inserting the batteries and connecting the infrared receiver

To insert the batteries, proceed as follows:

1 Slide the battery cover in the direction of the arrow.

2 Insert two AA alkaline batteries into the battery bay, matching the polarities (+ to +, - to -).

3 Close the battery cover and slide it securely back into place.

To connect the supplied USB infrared receiver, simply plug the end of its USB cable into one of the computer’s USB ports, as shown:

✍

When using the remote control, always point it directly at the receiver.


The following illustration and table describe the remote control’s features. Please see Giga Pocket’s online Help files, within the software itself, for more details.

n

N

29


n

N

30

Button Function

1

2

MUTE

STANDBY

Temporarily mutes the sound. Pressing it again restores the sound.

Puts your computer into Standby mode. See Using power saving modes (page 55)

. You cannot put your computer into Standby mode while Giga Pocket or Giga Pocket Server is running; approximately 5 minutes before timer recording starts; or just after the expiration date of a Video Capsule.

3 MODE switch

4 Numbered buttons

1 - 0

Used to select channels. Press the ENT button after you press these number buttons. You can select up to

3-digit numbers. You cannot change channels while recording.

5 Application buttons

If you are using more than one desktop with the remote control, this switches control between the computers. Set the switch from 1 to 3. whichever value is set in the target computer’s Remote Commander

Setting software. 1 is the default if you are just using one desktop.

These buttons are used when operating Giga Pocket.

Pressing MENU displays a menu on the computer screen. Press this button again to select software from the menu.

START launches the software that was selected with the MENU button.

CLOSE exits the software that was selected with the MENU button.

6 JUMP

7 ENT

8 FUNCTION

Goes back to the previous channel you selected. Press it again to return to the current channel.

Selects the channel. Press it after pressing the channel number buttons.

Press this button while Giga Pocket is selected through the MENU button to switch from the TV/recording deck to the playback deck.

Used to adjust the volume and select a channel. You cannot change channels while recording.

9 VOLUME and

CHANNEL

10 SIZE

11 AUDIO

12 ANGLE

Displays Giga Pocket in full-screen size. Pressing the button again displays Giga Pocket in its original size.

Selects the sound mode. Each time you press this button, the sound mode changes as follows: Mono >

Stereo > Channel A > Channel B > Mono.

This is a universal DVD playback function and is not used for Giga Pocket. This button changes the camera angle while playing back DVDs, as long as this function is supported by the DVD movie.


n

N

31

Button

13 SUBTITLE

Function

This is a universal DVD playback function and is not used for Giga Pocket. Use it to turn on/off the subtitles or change the language of the subtitles while playing back DVDs, as long as this function is supported by the DVD movie.

14

15

TV/VIDEO

DISPLAY

Each time you press this button, the TV/Recording deck images change to the television feed, or to those from a device connected to the external input port such as a digital device or VCR. You cannot change input sources while recording.

Displays the TV/Recording deck and playback deck screens when Giga Pocket is in full-screen mode.

Pressing the button again hides both the TV/Recording deck and playback deck.

Starts recording the TV programs you are watching on the TV/Recording deck.

16 REC

17 REC MODE

18 REC STOP

19 REW and FF

20 PREV and NEXT

Selects the recording mode. Each time you press this button, the recording mode changes from SP

(Standard Play) to HQ (High Quality). For details on the recording mode, refer to the Giga Pocket Help files.

Stops recording.

Used to rewind or fastforward the video tape while playing back Video Capsules.

21 PLAY STOP, PLAY and PAUSE

22 TITLE

These are DVD playback functions and are not used for Giga Pocket. Use these buttons to skip to the next or go back to the previous chapter, as long as the DVD supports this function.

Used to stop playback, play, and pause playback of Video Capsules appearing on the playback deck.

23 MENU

This is a universal DVD playback function and is not used for Giga Pocket. The function of this button can vary depending on the DVD you are watching.

Displays the Select Video Capsules window. Pressing it again hides the window. For details, refer to the

Giga Pocket Help files and the online Giga Pocket manual.

24 Up/Down/Left/

Right and ENTER

Used to select a Cabinet or Video Capsule in the Select Video Capsules window. For details, refer to the

Giga Pocket Help files and the online Giga Pocket manual.

Also used to operate the film roll when playing back Video Capsules on the playback deck. For details, refer to the Giga Pocket Help files and the online Giga Pocket manual.


Button

25 CANCEL

26 RETURN

n

N

32

Function

Closes the error message dialog box. The window returns to its original size when displayed in full-screen mode.

This is a universal DVD playback function and is not used for Giga Pocket. Use it to go back to a specified moment on the DVD, as long as the DVD supports this function.


n

N

33

Using the optical mouse

Your computer is delivered with a VAIO PS/2 optical mouse, which uses a light-emitting diode (LED) instead of a ball. Avoid using the mouse on a piece of glass or other transparent material, as this can interfere with smooth cursor movement on the screen.

Function Action point click double-click right-click drag and drop scroll

Move the entire mouse across a flat surface to place the pointer on an item or object.

Press the left button (1) once.

Press the left button twice.

Press the right button (2) once. In many applications, this action displays a contextsensitive shortcut menu.

Hold the left button down while sliding the mouse. Then release the button to drop the object.

Turn the central wheel (3) to scroll up or down a page. Or press the wheel once to lock the scroll action and control the movement by moving the entire mouse (the scroll function is available only with applications that support a scroll feature).

You can adjust the mouse pointer speed and other functions under Mouse Properties. To display Mouse

Properties, go to the Control Panel, select Printers and Other Hardware, then select Mouse.

✍

You can set the mouse up for left-hand use. See the Troubleshooting (page 75) section for details.


n

N

34

Using the DVD drives

❑

❑

Your computer is equipped with both a DVD±RW and a DVD-ROM drive.

The DVD±RW drive (top) reads data from and writes data onto DVD and CD.

The DVD-ROM drive (bottom) reads data from DVDs and CDs.

To insert a disc, proceed as follows:

1 Turn on the computer.

2 Press the appropriate eject button to open the drive.

The cover flap opens and the tray slides out.

3 Place a disc in the tray with the label side facing upwards. Make sure the disc is secure in the centre of the tray.

4 Close the tray by pushing it gently or by pressing the eject button.


n

N

35

✍

When the computer is in Standby or Hibernate mode, you cannot insert or remove a disc.

Make sure you seat the disc firmly in the tray. Otherwise, you could damage your disc drive and you may not be able to open the tray.

When you have finished using a disc, wait until the LED indicator turns off before pressing the eject button to remove the disc.

If the disc does not come out when you press the eject button, go to Windows Explorer or My Computer. Select the drive, click the right button of your mouse and select Eject.

What (re)writable DVD formats can I use?

Recordable and rewritable DVD formats include: DVD-R, DVD-RW, DVD+R and DVD+RW.

DVD-RW and DVD+RW discs can be written to up to 1,000 times, whereas DVD-R/+R can only be written to once. DVD+RW provides the most storage (4.7 GB), is the easiest to use and is the only one to provide full compatibility. This means that a DVD+RW disc recorded in your DVD±RW drive can be played in virtually all

DVD players and DVD-ROM equipped PCs.

For more information on DVD+RW you can go to the website of the DVD+RW Alliance: http://www.dvdrw.com

What (re)writable CD formats can I use?

Recordable and rewritable CD formats include CD-R, CD-RW (high-speed supported). CD-R (recordable) allows one-time recording on a disc whereas CD-RWs can be rewritten as many as 1,000 times.

Writing CDs and DVDs

To achieve optimum performance when writing data on to disc (also called ’burning’), follow these recommendations:

❑ Only use circular discs. Do not use discs with any other shape (star, heart, card, etc.), as this may damage the disc drive.

❑

❑

Do not strike or shake the computer while writing data to a disc.

For optimum writing speed, deactivate the screensaver before writing data to a disc.


n

N

36

❑

❑

❑

❑

Memory-resident disc utilities may cause unstable operation or data loss. Deactivate these utilities before writing data to a disc.

When using a software application to burn discs, make sure you exit and close all other applications.

Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing errors.

Never put stickers on discs. This will affect the use of the disc irreparably.

Playing DVDs

❑

❑

❑

❑

To achieve optimum performance when playing DVD-ROMs, you should follow these recommendations:

❑

❑

❑

❑

Close all open applications before playing a DVD-ROM movie.

You can play DVDs in both drives with the software PowerDVD for VAIO.

If you want to play a DVD and use Giga Pocket at the same time, please launch Giga Pocket before

PowerDVD for VAIO.

Do not switch power saving modes while playing a DVD-ROM.

Do not use resident disc utilities or other resident utilities to speed up the access of discs, because they may cause the system to become unstable.

Make sure that the screensaver is deactivated.

Region codes indicators are labelled on the DVDs to indicate in which region and on what type of player you can play the disc. Unless a 2 or ALL is labelled on your DVD or on the packaging, you cannot play the disc on this player.

Do not try to change the region code settings of the DVD drive. Any difficulties caused by changing the region code settings of the DVD drive are out of warranty.


n

N

37

Using two screens while watching a DVD film

By connecting a TV to your computer, you can watch a DVD film while still working on your desktop as normal.

To use the two screens and change the DVD playback settings, proceed as follows:

1

Connect the TV to your computer as described in Connecting a TV (page 63) .

2 Go to Control Panel.

3 Click Appearance and Themes and then Display.

The Display Properties dialog box appears.

4 Click the Settings tab.

5 Click Advanced.

The ...NVIDIA GeForce4 Ti 4600 dialog box appears.

6 Click the GeForce4 Ti 4600 tab.

7 Click nView Display Mode on the left.

8 Select the Clone mode check box.

9 Click Apply.

The image appears on both the computer and the TV display.

10 Click Overlay Controls on the left.

11 Under Full screen device, make sure Secondary Display is selected.

PowerDVD for VAIO will not play back the DVD on the TV if the Disable option is selected.

12 Make any other settings you require on the GeForce4 Ti 4600 tab and click OK.

IMPORTANT: While making your settings under Full Screen Device, DO NOT select Disable, as you will will deactivate the Giga Pocket main screen on the TV display.


Using the floppy disk drive

Your VAIO desktop is equipped with a floppy disk drive.

Inserting a floppy disk

To insert a floppy disk, proceed as follows:

1 Open the cover showing the Memory Stick™ icon on the front.

2 Hold the floppy disk with the label side facing up.

3 Gently push the disk into the floppy disk drive until it clicks into place.

n

N

38

4 Close the cover flap.


Removing a floppy disk

To remove a floppy disk, proceed as follows:

1 Wait until the LED indicator turns off.

2 Press the eject button and pull the disk out gently.


✍

Do not press the eject button when the LED indicator is turned on. Otherwise, data may be lost.

n

N

39


n

N

40

Using the modem

Your VAIO desktop is equipped with an internal modem. You need to connect a phone line to take advantage of online services and the Internet, to register your computer and software online, and to contact

VAIO-Link.

To connect a phone line, proceed as follows:

1 Plug one end of the supplied phone cable into the LINE port on the back of the computer.

2 Plug the other end into the wall jack.

✍

A country-specific phone plug is supplied with your VAIO desktop, allowing you to plug the phone line into the wall jack. We recommend you to use the supplied plug, because the usage of any other phone plug can decrease the connection quality.

Your computer cannot be connected to a coinoperated telephone, and may not work with multiple phone lines or a private branch exchange

(PBX). If you connect the modem to a parallel connected phone line, the modem or the other connected device may not function properly. Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.

Only DTMF (Dual Tone Multi Frequency) signalling (tone dialling) is supported.


n

N

41

Expansion capabilities

❑

❑

❑

❑

There are four expansion slots at the rear of your VAIO computer, as follows:

CNR/PCI slot containing the modem card and PCI PCMCIA card (bottom).

PCI slot containing the Giga Pocket ports.

Empty PCI slot.

AGP slot containing the graphics card (top).

The empty PCI slot allows you the choice of adding to the expansion capabilities of your computer. See

Upgrading your VAIO computer (page 93) for more details.

You are strongly advised not to add hardware yourself. Please contact your local Sony dealer for advice on changing the internal hardware components.


n

N

42

Using the Memory Stick™

❑

❑

❑

❑

❑

Your VAIO computer is designed to support the Memory Stick™. The Memory Stick™ is a compact, portable, and versatile device especially designed for exchanging and sharing digital data with compatible products.

Because it is removable, it can be used for external data storage.

Use the flash memory technology to download anything that can be converted into digital data, such as pictures, music, words, sounds, movies and photographs.

Foreseen as the universal data storage device of the future, the Memory Stick™ can already be used with an ever-increasing range of compatible products, including:

Audio systems

Visual devices

VAIO products

CLIE handhelds

Mobile phones.

There are currently two different types of Memory Stick™:

❑ The generic Memory Stick™, coloured blue.

❑ The MagicGate Memory Stick™, coloured white.

✍

You can purchase Memory Sticks™ from the Sony Style website ( http://www.sonystyle-europe.com

), or from your local Sony dealer.


n

N

43

Why Memory Stick™?

❑

❑

❑

❑

Sony's vision is to expand the world of communication, promoting the portability of digital data. The

Memory Stick™ is the resulting medium, through which digital devices can be instantly connected. With it, you can download data from any compatible device, then transfer it to another in a single and instant transfer.

The main advantages of the Memory Stick™ are its:

❑

❑

Compactness: with dimensions of just 21.5 mm (W) x 2.8 mm (H) x 50 mm (D), compatible products can also be small, lightweight and attractive in their design.

Capacity: Its data capacity far exceeds that of a floppy disk.

Security: its lock option means you can protect your data from accidental erasure.

Versatility: memory capacity ranges from 4MB up to 128MB (the equivalent capacity of 88 floppy disks).

Reliability: by way of protecting the hardware and its contents, the number of terminals is reduced to only 10 pins. This, and the overall robust structure of the stick, gives it a longer lifespan than other storage devices.

Durability: the same Memory Stick™ can be used tens of thousands of times.


n

N

44

Generic Memory Stick™

The original Memory Stick™, blue in colour, can be used to record image data taken with digital still cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at any given time.

❑

❑

❑

❑

Because it is easy to remove and transport safely, you can use Memory Stick™ anywhere by inserting it into any compatible device to transfer and share the information you have saved.

For you, this means you can expand the capabilities of your VAIO computer in the following scenarios:

With your still digital camera, share your holiday pictures instantly by e-mail.

From your handycam to your VAIO, make the most of your captured moments with the VAIO's movie editing tools.

Carry pictures on you by copying image files from the Internet to your VAIO to your CLIE handheld.

With your voice recorder, add your voice to e-mails so your tone is never misunderstood.

The blue Memory Stick™ is currently available with a with a 4, 8, 16, 32, 64 or a 128 MB memory (the equivalent capacity of 88 floppy disks).

✍

Generic Memory Sticks™ cannot be used with the Memory Stick™ Walkman, or with data that is protected by copyright.


n

N

45

MagicGate Memory Stick™

As the MagicGate Memory Stick™ is not supported on your RZ model, the following is for your information only.

If you want to be able to use the MagicGate Memory Stick™ technology, you can buy our external accessory

MSGC-US10.

The MagicGate Memory Stick™, white in colour, records PC and image data just like its blue counterpart; the difference is it uses the MagicGate copyright protection technology.

❑

❑

❑

❑

❑

❑

❑

❑

With this type of Memory Stick™, also called the MG Memory Stick™, you can enjoy the following features:

32, 64 and 128 MB capacity versions.

Storage of up to 120 minutes of audio data.

Download and save:

❑ digital music

❑

❑ pictures movies, and more.

Combine data files to add music to your home movies, for example.

Transfer and share data between several digital products.

MagicGate Copyright Protection Technology.

SDMI (Secure Digital Music Initiative) Compliance.

SonicStage software.


n

N

46

So that you further distinguish a MagicGate Memory Stick™ from a generic one, look for:

❑ the logo printed on it

❑ and a protruding dot located on the back.

✍

MagicGate is a copyright protection technology that complies with the standards set by SDMI (Secure Digital Music Initiative, an organisation working to draw up industry standard specifications in order to protect copyrights of digital music).

The with other media.

logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility

MagicGate

MagicGate refers to the copyright protection technology used by the MagicGate Memory Stick™ and other

MagicGate Memory Stick™ compatible devices.

The Memory Stick™ Walkman and MagicGate Memory Stick™ work together to check the data and ensure it complies with copyright protection.

If no problems are detected, the data is exchanged in encrypted form; if authentication is not passed, data cannot be exchanged or played back.

OpenMG

This is a copyright protection technology that is used to manage the digital music content downloaded to the PC from CDs, the Internet and/or other sources.

Software installed on the PC records music content in encrypted form onto the hard disk. As well as allowing you to enjoy music on the PC, this technology protects against unauthorised distribution on the Internet.

Since it is compatible with MagicGate, you can use OpenMG / Sonicstage to transfer music that you have downloaded onto your PC to your MG Memory Stick™, and playback on other MagicGate-equipped devices and media.


n

N

47

Copyright protection

People who create artistic works such as music are entitled to a "copyright", meaning that they have exclusive rights to dictate how their work is used. When they are created, artistic works are automatically protected by a copyright without having to submit notification or registration, and may not be used without the permission of the person who created the work.

In the music world, however, illegal acts of distributing music without the permission of the artist, particularly on the Internet, have recently been on the increase. That is why the Recording Industry

Association of America (RIAA) took the initiative to organise a forum called Secure Music Digital Initiative

(SDMI) to study technology for protecting copyrights during the electronic distribution of music.

Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection function that complies with SDMI standards, thereby providing an environment where individuals can record and enjoy third-party music data without worrying about copyright infringement.

✍

Literary works that are recorded by individuals are permitted for private usage only.


n

N

48

Compatible devices

❑

❑

❑

❑

There are nearly 80 Memory Stick™-enabled products on the market or announced for introduction worldwide, ranging from camcorders and portable music players to voice recorders and many other electronic devices.

You can currently use Memory Sticks™ with the following Sony products:

Visual:

Cybershot digital camera

Mavica digital camera

PC, TRV and VX series digital video cameras

LC data projector

❑

❑

❑

❑

Audio:

MS Walkman

MS Hi-fi system

Network Walkmans

Voice recorders

Other:

❑

❑

❑

❑

VAIO notebooks

VAIO desktops

CLIE Handheld Entertainment Organiser

Sony mobile phones

❑

❑

Digital printers

AIBO the Sony Entertainment Robot

To find out more about the products available in your country, go to: http://www.sonystyle-europe.com


n

N

49

Write-protecting a Memory Stick™

Memory Sticks™ are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting.

Move the tab to the right or left* to set or release write-protection. When the erasure prevention switch is off, data can be saved on the Memory Stick™. When the erasure prevention switch is on, data can be read from but not saved on the Memory Stick™.

LOCK

LOCK LOCK

* The 128 MB Memory Stick™ has a vertical lock.


n

N

50

Inserting a Memory Stick™

To insert a Memory Stick™, proceed as follows:

1 Open the cover showing the Memory Stick™ icon on the front.

2 Insert the Memory Stick™ into the Memory Stick™ slot with the connectors pointing to the right.

The Memory Stick™ is automatically detected by your system and appears in the My Computer window with its own drive.


✍

Always hold the Memory Stick™ with the arrow pointing in the correct direction when you insert it into the slot. To avoid damaging the computer or the Memory Stick™, do not force the Memory Stick™ into the slot if it does not insert smoothly.


Removing a Memory Stick™

To remove a Memory Stick™, proceed as follows:

1 Make sure the indicator light is not on.

2 Push the Memory Stick™ in to release it, and then pull it out.

n

N

51


✍

Always remove the Memory Stick™ gently, or it may pop out unexpectedly.

You are recommended to remove the Memory Stick™ before shutting down the computer.


n

N

52

Using PC Cards

Your VAIO desktop has a PC Card slot on the front panel that supports Type I or Type II PC Cards. PC Cards allow you to interconnect with portable external devices.


n

N

53

Inserting a PC Card

To insert a PC Card proceed as follows:

1 Open the bottom panel on the front of your VAIO.

2 Insert the PC Card gently into the PC

Card slot with the label facing upwards.

The PC Card is automatically detected by your system and the Safely

Remove Hardware icon appears in the taskbar.

3 Close the cover flap (unless the

PC Card peripheral prevents it).

✍

You do not need to shut down your computer when inserting a PC Card.

Some PC Cards may require you to disable idle devices when using the PC Card.

You may not be able to use some PC Cards or some functions of the PC Card with this computer.

Make sure you use the most recent software driver provided by the PC Card manufacturer.

If the PC Card is operating abnormally, go to Control Panel, Performance and Maintenance, System, click the Hardware tab, and then Device

Manager. If an “!” mark appears next to the PC Card device, remove the software driver and then reinstall it from the installation CD that accompanies the PC Card.

Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC

Card in the correct direction. See the manual supplied with your PC Card for more information on use.

For some PC Cards, if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is inserted, you may find that a device connected to your system is not recognised. Reboot your system to correct the problem.


n

N

54

Removing a PC Card

Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may crash and unsaved data may be lost. If you want to remove a PC Card when your computer is off, skip steps 1 to 7.

To remove a PC Card, proceed as follows:

1 Close any applications that are using the PC Card.

2 Double-click the Safely Remove Hardware icon

The Safely Remove Hardware dialog box appears.

in the taskbar.

3 Select the hardware you want to unplug.

4 Click Stop.

5 In the Stop a Hardware Device dialog box, select the device and confirm that it can be safely removed from the system.

6 Click OK.

You get the message that it is safe to remove the device.

7 Click Close.

8 Open the panel cover and press the

PC Card release button once so it is extended and ready for use.

9 Push the PC Card release button to eject the card.

10 Gently grasp the card and pull it out.

11 If the PC Card release button is still out, push it back in so you can close the front panel cover.


Using power saving modes

The colour of the power indicator light on the main unit tells you which mode the computer is in.

Colour

Blue

Umber

No colour

Mode

Computer is in Normal mode

Computer is in Standby mode

Computer is turned off or in Hibernate mode

n

N

55

Using Standby mode

If you plan to stop using your computer for a short period of time (not overnight), you can put it into

Standby mode instead of turning it off completely. Putting the computer into Standby mode saves energy and allows a quick return to normal computer use.

To set the timer for your computer to automatically enter Standby mode after a certain amount of time, go to Control Panel, click Performance and Maintenance and open Power Options.

To activate Standby mode manually, use one of these two methods:

Use the Standby button:

1 Save your work, close all applications and close your Internet connection, if applicable.

2 Press the Standby button at the top of the keyboard.

The computer goes into Standby mode, indicated by the umber light behind the System icon.

Use the Windows

®

taskbar:

1 Save your work, close all applications and close your Internet connection, if applicable.

2 From the Start menu on the Windows

®

taskbar, select Turn Off Computer.

Alternatively, press <Alt>+<F4> to get to the same dialog box.


n

N

56

3 Select Stand By.

The computer goes into Standby mode, indicated by the umber light behind the System icon.

To return to Normal mode, choose from the following:

❑

❑

Press any key on the keyboard.

Press the Standby button again.

Press one of the <S> Keys on the keyboard. ❑

❑ Quickly press the power button on your computer.

✍

You can leave Windows

®

running when using Standby.

If you press the power button for more than four seconds, the computer will switch off completely.

When the computer is in Standby mode, you cannot insert a disc.

Standby requires less time than Hibernate.

Standby uses more power than Hibernate.

Using Hibernate mode

If you are interrupted and need to leave your computer suddenly, you can put it into Hibernate mode. This power saving mode saves you the time of shutting down in the normal way.

When you put your computer into Hibernate mode:

❑

❑

❑

❑

Everything in the memory is saved to the hard disk.

The monitor and hard disk are turned off.

The computer is turned off.

The power indicator light turns off.

To set the timer for your computer to automatically enter Hibernate mode after a certain amount of time, go to Control Panel click Performance and Maintenance and open Power Options.


n

N

57

To activate Hibernate mode manually, use one of these two methods:

Use the Windows

®

taskbar:

1 Save your work.

2 From the Start menu on the Windows

®

taskbar, select Turn Off Computer.

Alternatively, press <Alt>+<F4> until the Turn Off Computer screen is displayed.

3 In the Turn Off Computer screen, hold down the <Shift> key to reveal the Hibernate button.

4 Click Hibernate.

The computer goes into Hibernate mode, the computer turns off.

Use the power button:

❑ Quickly press the power button on the front of the main unit.

The computer goes into Hibernate mode, the computer turns off.

To return to Normal mode, quickly press the power button on your computer.

Operation returns to the same state as before.

✍

You can leave Windows

®

running when using Hibernate .

If you press the power button for more than four seconds, the computer will switch off completely.

When the computer is in Hibernate mode, you cannot insert a disc.

Hibernate uses less power than Standby.

Hibernate requires more time than Standby.

Connecting peripheral devices

n

N

58

Connecting peripheral devices

You can add functionality to your computer by connecting any of the following peripherals, and more.

Before you connect a peripheral, turn off both the computer and the peripheral.

Connect the power cord only after connecting all cables.

Turn on the computer only after turning on all peripherals.

❑

❑

❑

❑

❑

Notes on connecting Universal Serial Bus (USB) devices (page 59)

Connecting an external display (page 60)

❑

Connecting a projector (page 62)

❑

Connecting a TV (page 63)

Connecting an external microphone (page 66)

Connecting a printer (page 67)

❑

Connecting a USB printer (page 68)

Connecting an i.LINK™ device (page 69)

❑

Connecting a digital video camera recorder (page 70)

❑

Connecting two VAIO computers (page 71)

❑

Connecting to a network (page 72)

✍

Hot plug and play devices (such as USB devices) should be plugged in when the computer is switched on.


n

N

59

Notes on connecting Universal Serial Bus (USB) devices

You can connect a USB device, for example, a scanner or a printer, to your VAIO desktop. Your computer features the latest USB technology, having been upgraded to USB Specification version 2.0. USB Specification version 2.0 increases device data throughput up to 480 Mbps, 40 times faster than USB 1.1 devices.

With the increased speed, you have the benefit of an additional range of high performance peripherals.

Even with multiple high-speed peripherals connected to a USB 2 bus, you do not have to worry about hitting the bandwidth bottleneck. The new specification also inherits the current USB’s Plug and Play and hotswapping capability as well as providing backward compatibility for USB 1.1 hardware.

There are USB ports on the front and back of your VAIO desktop. To connect a USB device, simply plug in the USB cable of the device into one of the ports on your computer.

✍

USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices unless the manual supplied with the device states otherwise.

For some USB devices you need to install the software before you connect the device. Not following this procedure might cause the device not to work properly. For more information, check the manual provided with the USB device.

You do not need to shut down the computer before connecting or disconnecting a USB peripheral.


n

N

60

Connecting an external display

❑

❑

❑

You can connect multiple displays to your desktop, each using a different port on the back of your computer: an LCD screen using the DVI connector, a CRT or LCD screen using the VGA connector, a TV using the TV-Out connector.

See also Setting up the monitor (page 24)

and Using two screens while watching a DVD film

(page 37) .

❑

❑

❑

Please make note of the following viewing possibilities:

❑ If you have a VGA and a DVI display connected at the same time, you can switch from one display to the other (the default is VGA), but you cannot display the image on both at the same time.

If you have a VGA and a TV connected, the image is shown on both screens by default.

If you have a DVI and a TV connected, the image is shown on both screens by default.

If you have a VGA, a DVI and a TV connected, the image will be shown either on both the VGA and the

TV, or both the DVI and the TV.

To change your display from VGA to DVI or vice versa, proceed as follows:

1

Connect the display(s), as described in Setting up the monitor (page 24) or in the instructions

delivered with the display, if applicable.


3 Click Appearance and Themes then Display.






n

N

61



8 Select the Device Settings button.

9 Click Select Output Device... and select the required display.

10 Click OK.

If you reboot after changing the settings as above, the default setting returns and the image is shown on the VGA screen again. If you want the image to be shown on both the DVI and the TV after rebooting, please disconnect the VGA.

Similarly, if you have all three displays connected and want the computer to select DVI and TV when you start your computer, simply make your settings again.


n

N

62

Connecting a projector

You can connect a projector (such as the Sony LCD projector) directly to your computer.

To connect a projector to your VAIO desktop, proceed as follows:

1 Plug one end of the VGA cable (not supplied) into the VGA connector on the back of your computer, and the other end into the projector you want to use (1).

2 Plug the audio cable (not supplied) into the headphones connector identified by the symbol (2).

3 Connect the power cord of the projector into an AC outlet (3).


n

N

63

Connecting a TV

You can connect a TV directly to your computer. See also Using the TV function (page 25)

and Using two screens while watching a DVD film (page 37) .

In order to be able to use a TV screen, you also have to enable the TV-Out function.

Your VAIO desktop is delivered with a TV-Out cable (or ’converter cable’), which is for use with TV sets without an S-Video port.

Connecting a TV that has no Video-S port

To connect a TV to your VAIO desktop with the supplied TV-Out cable, proceed as follows:

1 Plug one end of the TV-Out cable into the

TV-Out port on the back of your computer.

2 Take your composite cable (not supplied) and connect one end to the inserted TV-Out cable.

3 Connect the other end to the yellow-coloured port (Video-In) on your TV set.

The video output is now in place.

4 Connect the single end of your audio cable

(not supplied) to the headphones port, either on the back of your computer or on the connected speaker.

5 Connect the double end of the audio cable to the red and white ports respectively on your

TV set.

The audio output is now in place and your TV is ready for use with your computer.


Connecting a TV that has a Video-S port

To connect a TV to your VAIO desktop with an S-Video cable (not supplied), proceed as follows:

1 Plug one end of the S-Video cable into the TV Out port on the back of your computer.

2 Plug the other end of the S-Video cable into your TV’s S-Video port.

n

N

64

To enable TV-Out, proceed as follows:


2 Click Appearance and Themes.

3 Click Display.








8 Select Clone and click Apply.

To watch a DVD with Giga Pocket, showing it in full-screen on TV, proceed as follows;

1 Click Overlay Controls on the left.

2 Select Secondary Display under Full Screen Device.

3 Click OK.

n

N

65


n

N

66

Connecting an external microphone

Your VAIO desktop does not contain an internal microphone. If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone.

To connect an external microphone, plug the microphone cable (1) into the microphone port (2) identified by the symbol .

✍

Make sure your microphone is designed for computer use.


Connecting a printer

To connect a printer, proceed as follows:

1 Plug the printer cable into the printer connector on your computer.

2 Plug the printer power cord into an AC outlet.

n

N

67


n

N

68

Connecting a USB printer

To connect a USB printer, simply plug the printer's USB cable into one of the USB ports on your VAIO desktop. There are USB ports at the front and at the back of your computer.

✍

Do not turn on the computer or the printer until all the connections are made.

These procedures do not apply to all printers. If you do not have a printer compatible to these procedures, please refer to the manufacturer’s instructions on connecting and installing it.


n

N

69

Connecting an i.LINK™ device

❑

❑

Your VAIO computer includes a 4-pin i.LINK™ port on the front of the system and a 6-pin i.LINK™ port on the back of the system. Use these ports to connect an i.LINK™ device such as a digital video camera recorder or to link up two VAIO computers so you can copy, delete or edit files.

The 6-pin i.LINK™ port can supply power from the computer to the connected device.

The 4-pin i.LINK™ port cannot supply power to a connected device.

The i.LINK™ ports supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of the external device.

The i.LINK™ features available may vary depending on the software applications you use. Refer to the documentation that came with your software for more information.

The i.LINK™ cables that are compatible with your VAIO desktop include cables with the following part numbers: VMC-IL4415, VMC-IL4435, VMC-IL4615, VMC-IL4635, VMC-IL6615, and VMC-IL6635. Sony computer supplies, accessories and peripherals can be purchased from your local retailer or from the Sony website: http://www.sonystyle-europe.com

❑

Connecting a digital video camera recorder (page 70)

❑

Connecting two VAIO computers (page 71)

✍

An i.LINK™ connection with other compatible devices is not fully guaranteed.

You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices.

The i.LINK™ connection varies depending on the software applications, operating system and i.LINK™ compatible devices you use. Refer to the documentation that came with your software for more information.

Check the working conditions and OS compatibility of i.LINK™-compatible PC peripherals (HDD, CD-RW drive etc.) before you connect them to your

VAIO desktop.


n

N

70

Connecting a digital video camera recorder

To connect a digital video camera recorder, proceed as follows:

1 Plug one end of the i.LINK™ cable (not supplied) into the i.LINK™ port of the computer and the other end into the DV-Out port on your digital video camera recorder.

2 Launch the DVgate application (see your Software Guide for more information).

✍

On Sony digital video cameras, ports labelled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible.

The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently.

If your digital video camera recorder includes a Memory Stick™ slot, you canuse it to copy images from the camera to your computer. To do so, simply copy images on the Memory Stick™, and then insert it into the Memory Stick™ slot of your computer; just like using a floppy disk, for example.


n

N

71

Connecting two VAIO computers

If you have adminstrator rights on your computer, you can connect your VAIO desktop to another VAIO computer using an i.LINK™ cable (not supplied). With the software delivered with your VAIO desktop, you can copy, edit or delete files on another VAIO computer that also has Windows

®

XP installed.

You can also print a document on a printer connected to another VAIO computer.

To connect your VAIO desktop to another VAIO computer, proceed as follows:

1 Insert one end of the i.LINK™ cable into one of the i.LINK™ ports on the main unit of the VAIO desktop.

2 Connect the other end to the other VAIO computer.


n

N

72

Connecting to a network

Your computer comes with a built-in Ethernet interface.

To connect to a network, proceed as follows:

1 Connect your 10BASE-T/100BASE-TX Ethernet cable (not supplied) to the Ethernet port on the back of the computer.

If there is a sticker covering the Ethernet port, this is to remind customers in Germany not to insert an

ISDN cable (see caution below).

2 Go to Start, right-click My Computer and select Properties.

3 Click the Hardware tab and select Device Manager.

The Device Manager screen appears with the list of devices.

4 Under Network Adapters, right-click Realtek RTL8100B/810x Family PCI Fast Ethernet NIC.


n

N

73

5 Click Properties.

6 Under Device Usage, select Use this device (enable).

7 Click OK to close the Properties window.

The Ethernet connection is now enabled.

!

Connect only 10BASE-T/100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may cause a malfunction, excessive heat or even fire in the port. If using this computer in Germany, please make sure you do not use an ISDN cable. It is physically very similar, but its higher voltage of 12V may destroy the motherboard inside the computer.

✍

For more information about connecting your VAIO desktop to the network, please consult the Hardware troubleshooting section of the VAIO-Link website ( http://www.vaio-link.com

):

How to troubleshoot network problems.

For help on connecting to a network, see your network administrator.

Getting help

n

N

74

Getting help

This section describes how to get help and support from Sony, as well as troubleshooting tips for your computer.

Sony provides several support options for your computer.

Sony's support options

Sony offers you many support options for your computer.

Sony documentation

Please see the section Documentation pack (page 9)

for details on the printed and online documentation delivered with your computer.

Other sources of information

❑ Online Help files: Before contacting VAIO-Link, try to solve the problem by reading the user guides and help files supplied with the peripherals or software.

❑ VAIO-Link website, which you can access if you have any problems with your computer: http://www.vaio-link.com

✍

You will need to set up and configure your VAIO's internal modem before you can make use of these communication features.

Getting help

n

N

75

Troubleshooting

❑

❑

❑

❑

❑

❑

❑

❑

❑

This section describes how to solve common problems you might encounter when using your VAIO desktop.

Many problems have simple solutions. Please try these suggestions before contacting VAIO-Link or your local

Sony dealer.

You are recommended to print out this section and keep it for future reference.

About the computer and software (page 76)

About Giga Pocket (page 80)

About the display (page 81)

About discs and floppy disks (page 83)

About sound (page 86)

About the modem (page 87)

About peripherals (page 88)

About digital video captures and DVgate (page 92)

About i.LINK™ devices (page 92)

Getting help

n

N

76

About the computer and software

My computer does not start

❑

❑

❑

❑

❑

❑

Check that the computer is plugged into a power source and that it is turned on.

Check that the power indicator on the front panel of the computer indicates that the power is on.

Confirm that the power cord and all cables are connected firmly.

If you have plugged the computer into an Uninterrupted Power Supply (UPS), make sure the UPS is turned on and works.

Check that the monitor is properly connected to the main unit. Check that the brightness and contrast controls are adjusted correctly.

Moisture condensation may have occurred. Wait at least an hour after trying before turning the computer on.

The message 'Press <F1> to continue, <F2> to enter setup' appears at startup

If the message Press <F1> to continue, <F2> to enter setup appears at the bottom of the display, you need to initialise the BIOS.

To initialise the BIOS, proceed as follows:

1 Turn off the computer.

2 Remove any peripheral devices connected to the computer.

3 Turn on the computer and press <F2> when the Sony logo appears.

The BIOS setup menu screen appears.

4 Use the keyboard’s arrow keys to select the Exit menu.

5 Press <F5> or use the arrow keys to select Setup Defaults. The message Load default configuration

now? appears.

6 Make sure that Yes is selected and then press <Enter>.

Getting help

n

N

77

7 Press <F10> to exit, or use the arrow keys to select Save and Exit..

The message Save configuration changes and exit now? appears.


My computer does not shut down

It is recommended that you shut down your computer using the Turn Off Computer command on the

Windows

®

Start menu. Using other methods, including those listed here, may result in loss of unsaved data.

If the Turn Off Computer command does not work properly, proceed as follows:

1 Shut down the computer by pressing <Alt>+<F4>. The Turn off computer box appears. Select Turn Off.

2 If this does not work, press <Ctrl>+<Alt>+<Delete>. The Task Manager dialog box appears. Click Shut

Down, then Turn Off.

3 If this does not work, press the power button and hold it for at least four seconds.

This turns off the power.

4 If you really have tried everything, unplug the computer from the mains.

My system is running slowly

❑

❑

❑

The system response time varies, depending on the number of applications that are open and running.

Close any application that you are not currently using.

Increasing the system memory may also help. The computer has two memory slots. For memory upgrades, use only PC2700 (DDR333) DDR-SDRAM DIMM modules. For information on installing memory,

please see the section Upgrading memory (page 97) .

Another option is to defragment the hard drive. See the Windows

®

Help files for details or contact your system administrator if you have one.

Getting help

n

N

78

My computer locks up

❑

❑

❑

❑

If you suspect an application is locking your system, you can try to stop it. To do this, press

<Ctrl>+<Alt>+<Delete> once. If you have not changed the default settings, you will enter the Task

Manager. On the Applications tab, select the application that is locking your system, and then click

End Task.

If the above method does not work or you do not know which application is locking your system, restart the computer. On the Windows

®

taskbar, click the Start button, click Turn Off Computer, and then select Restart.

Alternatively, press <Alt>+<F4> to get to the Turn off computer screen.

If the above method does not work, press the power button and hold it for at least four seconds. This turns off the power.

If your computer locks up while playing a CD or DVD, stop the disc, and shut down the computer by pressing <Alt>+<F4>, and then click Turn Off.

My computer or software program is not responding

To end the application that has stopped responding, proceed as follows:

1 Press <Ctrl>+<Alt>+<Delete>.

If you have not changed the default settings, you will enter the Task Manager.

2 On the Applications tab, scroll down until you see the comment Not responding next to an application.

3 Select this application from the list and click End Task.

Windows

®

will try to close the application. If it fails to do so, a second dialog box appears.

4 Select End Task again.

✍

If you are unable to unlock the application, repeat the above procedure, but select Shut Down > Turn Off when the Windows Task Manager appears.

Getting help

n

N

79

If this still fails, proceed as follows:

1 If possible, save any unsaved work.

2 Press <Alt>+<F4>.

The Turn off computer box appears.

3 Select Restart.

Make sure the software you are using is compatible with your equipment and operating system. If these options fail, try re-installing the software. For bundled Sony software, see the printed Application CD

Guide for installation details.

✍

If none of the above solves the problem, you can turn off the computer by pressing the power button for longer than 4 seconds. All unsaved data will be lost.

If the same application locks up regularly, contact the software publisher or the advertised technical support.

Windows

®

locks up during shutdown

There are many reasons why the Windows

®

operating system may not shut down properly, including incompatible or conflicting drivers, damaged files, or non-responsive hardware.

To search Windows

®

Help for troubleshooting information, proceed as follows:

1 From the Start menu, select Help and support.

2 Click Fixing a problem.

3 Use the browse and search functions to find a solution.

Getting help

n

N

80

About Giga Pocket

The "Hardware Overlay Error" message appears

❑

❑

❑

If another application is using the hardware overlay, this means it is temporarily overriding your desktop settings and preventing Giga Pocket from launching. Close the relevant application and relaunch Giga

Pocket.

If you want to use Giga Pocket at the same time as another application, make sure you launch Giga

Pocket first, as it needs prioritised access to the hardware overlay.

In Giga Pocket Explorer, before clicking Make DVD or Send to > Click to DVD, close the main Giga

Pocket window. You can then proceed as normal.

Getting help

n

N

81

About the display

❑

❑

❑

❑

❑

❑

My monitor does not display anything

Check that the computer is plugged into a power source and that it is turned on.

Check that the monitor is plugged into the computer and to a power source, and turned on.

Check that the power indicators on the main unit and on the screen are on.

Adjust the brightness of the monitor.

The computer display may be in Standby mode. Press any key to activate the display.

If you want to use a digital display (DVI), you cannot use it at the same time as a VGA. Either disconnect

the VGA display and reboot your computer, or change the settings as described under Connecting an external display (page 60) .

The window I have just closed is still on the screen

Press the Windows

®

key and <D> key twice to refresh the screen.

❑

❑

I cannot find the Windows

®

taskbar

Check that the taskbar is not hidden or minimised.

Move the cursor to each edge of the screen to retrieve the taskbar.

To change the default view of the taskbar and the Start menu, proceed as follows:

1 Click Start, and select Control Panel.

2 Click Appearance and Themes, then Taskbar and Start Menu.

The Taskbar and Start Menu Properties dialog box appears, where you can make the required settings.

Getting help

I want to change the resolution of my display

To change the resolution of your display, proceed as follows:

1 From the Start menu, select Control Panel.

2 Click Appearance and Themes, then Display.


3 Select the Settings tab.

4 Move the Screen resolution slider to change the resolution.

5 Click OK.

n

N

82

Getting help

n

N

83

About discs and floppy disks

My disc drive tray does not open

To open the disc drive, proceed as follows:

With the eject button:

1 Make sure the power is turned on.

2 Press the eject button on the appropriate disc drive.

Using My Computer:

1 Click Start, and then My Computer.

2 Right-click the disc drive icon.

3 Select the Eject option.

The disc drive opens and you can retrieve the disc.

If the disc tray still does not eject, the CD/DVD-writing application software may be stopping it. Make sure the application is closed before you proceed.

❑

❑

❑

❑

❑

❑

I cannot play a CD

After inserting the CD, wait for a few seconds for the system to detect it before you try to access it.

Make sure the label of the disc is facing upwards.

If the disc requires software, make sure the software is installed according to the instructions of the program.

Check the volume of your speakers.

Clean the disc with an appropriate cleaner.

Moisture condensation may have occurred. Leave the computer for at least 1 hour before turning it on.

Getting help

n

N

84

I cannot play a DVD

❑

❑

❑

If a region code warning appears when you are using the DVD player, it could be that the DVD you are trying to play is incompatible with the DVD drive on your VAIO desktop. The region code is listed on the packaging of the disc.

If you hear sound but cannot see a picture, your computer's video resolution may be set too high. For best results, change the resolution in the Control Panel - Display to a lower resolution.

If you see the video but cannot hear sound, check all of the following:

❑

❑

Make sure the mute setting is off in your DVD player software.

Check the volume settings under Control Panel - Sounds, Speech and Audio Devices. If you have connected external speakers, check the volume settings for your computer speakers and check the connections between your speakers and the computer.

❑ In the Device Manager, check that the correct drivers are installed properly. To display the Device

Manager, Go to the Control Panel. Click Performance and Maintenance, and then the System icon. In the System Properties dialog box, click the Hardware tab.

❑ A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary, reboot the computer, remove the disc and then check that it is not dirty or damaged.

✍

On your computer, the default DVD region code is 2, which is the region code for European DVDs. Do not change this setting using the Region Code

Change function in Windows

®

, or any other software application. System malfunctions originating from the user changing the DVD region code are beyond the scope of your warranty and will result in service charges for repair.

My floppy disk drive cannot write to a disk

❑

❑

The floppy disk may be write-protected. Disable the write-protect feature or use a disk that is not writeprotected.

Check that the disk is properly inserted into the floppy disk drive.

Getting help

n

N

85

When I double-click an application icon, a message such as 'You must insert the application CD into your drive' appears and the software does not start

❑

❑

Some titles require specific files that are located on the application CD-ROM. Insert the disc and try starting the program again.

Make sure you place the disc in the tray with the label side facing upwards.

The recording and reading speed of DVD+/-RWs is slow

Generally, the speed of a DVD+/-RW is slower than that of a CD/DVD-ROM, CD-R or DVD+/-R. The speed can also vary depending on the type of format.

Getting help

n

N

86

About sound

❑

❑

❑

My speakers are not producing any sound

If you are using an application that has its own volume control, check that the volume is turned up.

Check the volume controls in Windows

®

and in Windows

®

Media Player.

Check that the speakers are connected correctly and turned on, and that the power cable is plugged into the mains (see the printed Getting Started brochure or the back of the Specifications sheet for connection details).

My microphone is too sensitive to background noise

If you find there is too much background noise when you record sound, you can adjust the microphone gain.

To adjust the microphone settings, proceed as follows:

1 In the Control Panel, choose Sounds, Speech and Audio Devices.

2 Click Sounds and Audio Devices.

The Sounds and Audio Devices Properties box appears.

3 Click the Voice tab.

4 Under Voice recording, click Volume.

The Recording Control dialog box appears.

5 In the Options menu, select Properties.

The Properties dialog box appears.

6 Change the setting in the Adjust volume for dialog box from Playback to Recording, and then click

OK.

7 Reduce the microphone level by moving the slider control.

Getting help

n

N

87

8 In the Options menu, select Advanced Controls, and then click the Advanced button under

Microphone - Balance.

The Advanced Controls for Microphone dialog box appears.

9 Deselect the Microphone Boost check box, and then click Close.

10 Close the Recording Control dialog box.

The unwanted noise should now be cleared.

About the modem

❑

❑

My internal modem does not work

❑

❑

❑

Check that the phone line is plugged into your computer.

Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone.

Check that the phone number the program is dialling, is correct (refer to the information you recieved from your Internet Service Provider).

In the Phone and Modem Options dialog box (Control Panel / Printers and other Hardware /

Phone and Modem Options), check that your modem is listed on the Modems tab, and that the location information is correct on the Dialing Rules tab.

Whenever you use your modem while travelling, make sure that the country of the active location defined in the Phone and Modem Options dialog box matches the country you are dialling from.

❑

❑

❑

My modem cannot establish a connection

The modem dialling mode may be incompatible with your telephone line.

The modem may not work properly if you are behind a Private Automatic Branch exchange (PABX).

Make sure that the modem is the only device connected to your telephone line.

Getting help

n

N

88

My modem connection is slow

❑

❑

Many factors influence modem connection speed, including telephone line noise or compatibility with telephone equipment (such as fax machines or other modems). If you think your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider, check the following:

❑

❑

Have your phone company check that your phone line is free from any line noise.

If your problem is fax-related, check that there are no problems with the fax machine you are calling and that it is compatible with fax modems.

If you are having a problem connecting with your Internet Service Provider, check that the ISP is not experiencing technical problems.

If you have a second phone line available, try connecting the modem to that line.

About peripherals

My mouse does not work properly

❑

❑

❑

❑

If using the mouse delivered with your computer, check that it is plugged into the PS/2 mouse port on the back of the unit.

PS/2 connections are not ’Plug and Play’ devices, which means that if you connect the PS/2 mouse after the system has started, it does not work. Shut down the computer and connect the mouse before restarting the system.

Note that the scrolling features work only with programs that use scroll bars. Some programs do not support features usually available with the central wheel.

Do not use the mouse on a reflective surface (such as a mirror) or transparent surface (such as glass).

Some surfaces do not allow the sensor and DSP to function properly because the irregularities are too small to be detected. The best surfaces reflect but scatter light; an example is a blank sheet of white drawing paper. Otherwise, use a standard mouse pad.

Getting help

n

N

89

My mouse needs to be set up for left-hand use

To set your mouse up for left-handed users, proceed as follows:

1 Go to Start, select Control Panel, then click the Printers and Other Hardware option.

2 Click the Mouse icon.

The Mouse Properties dialog box appears.

3 In the Buttons tab, select the option button next to Switch primary and secondary buttons.

4 Click OK.

The new mouse settings are now in place.

My keyboard does not work properly

❑

❑

If using the keyboard delivered with your computer, check that it is plugged into the PS/2 keyboard port on the back of the unit.

PS/2 connections are not ’plug and play’, which means that if you connect the PS/2 keyboard after starting your computer, it does not work. Shut down the computer and connect the keyboard before restarting the system.

❑

❑

I cannot use digital (DV) devices. The message 'DV equipment seems to be disconnected or turned off' appears.

❑

Check that the DV device is turned on and that the cables are properly connected.

If you are using multiple i.LINK™ devices, the combination of the connected devices may cause unstable operation. If this is the case, turn off all connected devices and disconnect unused devices. Check the connection and then turn on the power again.


Getting help

n

N

90

How do I install a printer?

Always check the printer manufacturer’s website for the latest drivers for Windows

®

XP Home Edition

Service Pack 1 before proceeding. Some printers do not function properly without updated drivers.

If the printer has a USB connection, the printer should be automatically installed.

To install a local printer, proceed as follows:

1 From the Control Panel, select Printers and Other Hardware, then Printers and Faxes.

2 Under Printer Tasks, click Add a printer.

3 Let the Add Printer Wizard guide you through the installation process.

4 Click Finish.

The printer is now installed.

✍

This procedure applies for most, but not for all printers.

I cannot print

❑

❑

❑

Check that all the cables of the printer are properly connected.

Check the cable to see if the pins are bent or missing completely.

Try a printer self test (if available) to see if the printer itself is still working properly. For more information, please consult the manual supplied with your printer.

❑

❑

Some printers have a specific installation procedure. Please check the manual supplied with your printer.

Check that your printer is correctly configured and that you have up-to-date drivers. If necessary, contact your dealer.

❑ Try resetting the printer connection, as follows:

1 From the Control Panel, select Printers and Other Hardware, then Printers and Faxes.

2 Click the icon of the printer installed on your computer.

3 In the Printer Tasks menu, which has now expanded, click Set printer properties.

Getting help

n

N

91

4 Have a look through the different tabs and check for abnormalities.

5 Restart your computer.

❑ The default setting for the printer port mode is correct for most printers, but you can try to change the printer port mode, as follows:

1 Turn on the computer and press <F2> when the Sony logo appears.

The BIOS setup menu screen appears.

2 Use the keyboard’s arrow keys to select the Advanced menu.

3 Select I/O Device Configuration, then press the <Enter> key.

4 Select Parallel Port Mode, then press the <Enter> key.

5 Select a printer port option using the arrow keys, then press <Enter>.

The documentation delivered with your printer should give you the relevant port option.

6 Press <F10> to exit, or use the arrow keys to select Save and Exit..

The message Save configuration changes and exit now? appears.


8 Your computer restarts.

When I remove a Memory Stick™, an error message appears

Insert the Memory Stick™ into the slot again and press <Enter>. Wait until the active application finishes, then remove the Memory Stick™. If the message confirms the ejection of the Memory Stick™, click OK.

Getting help

n

N

92

About digital video captures and DVgate

When I record images to a digital video device using DVgate, my system displays the message 'Recording to

DV device failed. Check the power and cable connections to the devices and try again'

Close all open applications and restart your computer. Frequently recording images to a digital video device while using DVgate sometimes causes this error.

About i.LINK™ devices

My i.LINK™ device does not appear on the desktop

To see the i.LINK™ device icon on the desktop, proceed as follows:

1 Turn off and disconnect your i.LINK™ device.

2 Reconnect your device.

3 Turn on the power on the device again.

The icon should now appear on the desktop.

The connected i.LINK™ device is not recognised

Disconnect the i.LINK™ device, then connect it again.


I cannot establish an i.LINK™ connection between two VAIO computers

❑ You must have administrator rights on your computer to be able to link the two.

❑

❑

Disconnect then reconnect the i.LINK™ cable.

If you still have no connection after waiting for a while, restart both computers.

❑

❑

If either computer has just returned from a power saving mode, the connection may be affected. In this case, make sure you perform a full restart before connecting them.

Check that both units are in the same workgroup, and that the Sharing option is enabled.

Upgrading your VAIO computer

n

N

93

Upgrading your VAIO computer

The following procedures assume familiarity with the general terminology associated with PCs and with the regulatory compliance required for modifying electronic equipment.

Observe proper safety precautions at all times.

Your VAIO desktop and memory modules use high precision components and electronic connector technology. To avoid the invalidation of your guarantee by mishandling, it is recommended that:

You contact your local Sony dealer to install any new internal hardware components.

You do not install memory modules yourself, if you are not familiar with upgrading memory on a computer.

Please contact VAIO-Link if you need assistance.

!

Always switch the power off before you open the system. Otherwise, damage may occur to the integrated circuits in your computer.

!

Electrostatic discharge (ESD) can damage disk drives, add-on cards, and other components. Follow the procedures here only at an ESD workstation.

Otherwise, do not work on a carpeted area and do not handle materials that produce or hold static electricity, such as cellophane wrappers. Ground yourself by keeping constant contact with an unpainted metal part of the unit while carrying out any of these procedures.


n

N

94

Opening the side cover

To remove the side panel from the main unit, proceed as follows:

1 Shut down your computer and disconnect all peripheral devices.

2 Unplug the computer from the mains.

3 Wait until the computer cools down.

The inside of the main unit becomes very hot during operation. Wait for about one hour for the computer to cool down before opening the unit.

4 With the main unit’s back panel facing you, position the main unit on its left side.

5 Locate the tabs on the side cover, and pull them up until the cover releases.

6 Slide the cover away from the unit and set it aside.


n

N

95

Inserting a PCI add-on board

Your computer has an open PCI expansion slot. This slot enables you to install an add-on board to expand the functionality of your system.

Add-on board configuration can vary.

To insert an add-on board, proceed as follows:

1 Shut down your computer and turn off all peripheral devices, such as your printer.

2 Unplug your computer and any peripheral devices.

3

Remove the side cover as described in Opening the side cover (page 94)

.

4 Locate the available expansion slot.

5 Remove the screw, and then remove the slot cover, as shown:


n

N

96

6 Install the add-on board by plugging it into the expansion slot and secure it with the screw from the expansion slot, as shown:

7 Attach any internal cables that the board requires (see the manual that came with the add-on board).

8

Replace the side cover as described in Closing the side cover (page 101) .

9 Reconnect all peripheral devices and the power cord, and then turn on the computer.

✍

Make sure you observe the proper safety precautions when you add boards to your VAIO computer.


n

N

97

Upgrading memory

In the future, you may want to upgrade the memory installed on your VAIO by replacing / adding memory modules. However, we recommend that you do not install them yourself unless you are familiar with upgrading memory on a computer.

For memory upgrades, use only PC2700 (DDR333) DDR-SDRAM DIMM modules.

Be careful when adding memory yourself. Mistakes on installation or removal of the memory module may cause a malfunction.

❑

❑

Electrostatic discharge can damage electronic components. Before touching a memory expansion board, remember the following:

❑

❑

❑

❑

Handle the memory module gently.

The procedures described in this document assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.

Disconnect the system from its power source and from any telecommunication links, networks, or modems before you open the system. Failure to do so may result in personal injury or equipment damage.

Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example).

Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure.

Do not open the memory module package until you are ready to install the module. The package protects the module from ESD.

Use the special bag delivered with the memory module, or wrap the module in aluminium foil to protect it from electrostatic discharge.


n

N

98

✍

Do not place the memory module in places subject to:

- Heat sources such as radiators or air ducts,

- Direct sunlight,

- Excessive dust,

- Mechanical vibration or shock,

- Strong magnets or speakers that are not magnetically shielded,

- Ambient temperature of more than +35°C or less than +5°C,

- High humidity.

!

Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the computer, will result in damage to the computer and any repairs will be out of warranty.


n

N

99

Adding / replacing a memory module

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer.

To add or change a memory module, proceed as follows:

1 Shut down the computer, unplug it, and remove any peripheral devices. Wait for the computer to cool down.

2

Open the unit (see Opening the side cover (page 94) ).

3 To remove an existing memory module, release the end latches and gently lift out the module, as shown:

4 To insert a new memory module, remove it from its anti-static package, handling it only by the edges.


5 Locate the notch on the bottom edge of the memory module.

6 Align the memory module over the slot, making sure the module is facing the correct way.

7 Press evenly against the memory module's upper corners. The end latches snap into position automatically, as shown:

n

N

100

8 Reinstall any add-on cards or components you removed.

9

Replace the side cover as described in Closing the side cover (page 101) .

✍

There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.

!

Use only PC2700 (DDR333) DDR-SDRAM DIMM modules.


n

N

101

Viewing the amount of memory

To view the amount of memory, proceed as follows:

1 Turn on the computer.

2 Click the Start button, point to All Programs, then VAIO System Information, and click VAIO

System Information again.

You can view the amount of installed memory here.

Closing the side cover

To replace the side cover, proceed as follows:

1 Align the tabs on the side cover to the rim of the unit.

2 Slide the side cover firmly into the ridges of the unit until it is in place.

Precautions

n

N

102

Precautions

❑

❑

❑

❑

❑

❑

❑

This section describes safety guidelines and precautions to help you protect your computer from potential damage.

Please contact VAIO-Link if you need assistance.

On handling the hard disk (page 103)

On using the power source (page 103)

On handling your computer (page 104)

On handling LCD screens (page 105)

On handling floppy disks (page 106)

On handling compact discs (page 106)

On handling Memory Sticks™ (page 106)

Precautions

n

N

103

On handling the hard disk

The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust.

Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer.

To avoid damaging your hard disk:

❑

❑

❑

❑

Do not subject your computer to sudden movements.

Keep the computer away from magnets.

Do not place your computer in a location subject to mechanical vibration or in an unstable position.

Do not move your computer while the power is on.

Do not turn off the power or restart the computer while reading or writing data to disk.

❑

❑ Do not use your computer in a place subject to extreme changes in temperature.

✍

If the hard disk is damaged, the data cannot be restored.

❑

❑

❑

❑

❑

❑

On using the power source

❑

Your computer operates on 220-240V AC50/60Hz.

Do not share the AC outlet with other high power-consuming equipment, such as a photocopier or shredder.

You can purchase a power strip with a surge protector. This device prevents damage to your computer caused by sudden power surges, in an electrical storm, for example.

Do not place heavy objects on the power cord.

To disconnect the cord, pull it out by the plug. Never pull the cord itself.

Unplug your computer from the wall outlet if you are planning to not use the computer for a long time.

Make sure that the socket outlet is easily accessible

Precautions

n

N

104

❑

❑

On handling your computer

❑

❑

❑

❑

❑

❑

Clean the unit with a soft cloth, which is either dry or lightly moistened with a mild detergent solution.

Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.

Should you drop a solid object or any liquid onto the computer, shut down your computer and then unplug it. You may want to have the computer checked by qualified personnel before operating it again.

Do not drop the computer or place heavy objects on top of the computer.

❑

❑

❑

❑

Do not place your computer in a location subject to:

❑ Heat sources, such as radiators or air ducts

❑ Direct sunlight

Excessive dust

Moisture or rain

Mechanical vibration or shock

❑

Strong magnets or speakers that are not magnetically shielded

An ambient temperature of more than 35ºC or less than 10ºC

❑ High humidity.

Do not place electronic equipment near your computer. The electromagnetic field of your computer may cause a malfunction.

Provide adequate air circulation to prevent internal heat from building up. Do not place your computer on porous surfaces such as rugs or blankets, or near material such as curtains or draperies that may block its ventilation slots.

The computer uses high-frequency radio signals and may cause interference to radio or TV reception.

Should this occur, relocate the computer a suitable distance away from the set.

Use only specified peripheral equipment and interface cables; otherwise, problems may occur.

Precautions

n

N

105

❑

❑

❑

❑

Do not use cut or damaged connection cables.

If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer. In this case, allow at least one hour before turning on your computer. If any problems occur, unplug your computer and contact VAIO-Link.

Make sure you disconnect the power cord before cleaning the computer.

As you may lose important data once your computer is damaged, you should back up your data regularly.

You can restore most of the original application programs from the supplied application CD-ROM (read the printed Application CD Guide for details).

❑

❑

❑

❑

On handling LCD screens

❑

❑

❑

Do not leave the LCD facing the sun as it can damage the LCD. Be careful when using the computer near a window.

Do not scratch the LCD or exert pressure on it. This could cause malfunction.

Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.

A residual image may appear on the screen if the same image is displayed for a lengthy period of time.

The residual image disappears in a while. You can use a screensaver to prevent residual images.

The screen becomes warm during operation. This is normal and does not indicate a malfunction.

The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/ or bright points (red, blue, or green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does not indicate a malfunction.

Avoid rubbing the LCD screen, as this can damage the screen. Use a soft, dry cloth to wipe the LCD screen.

Precautions

n

N

106

❑

❑

❑

On handling floppy disks

Do not open the shutter manually or touch the surface of the floppy disk.

Keep floppy disks away from magnets.

Keep floppy disks away from direct sunlight and other sources of heat.

❑

❑

❑

On handling compact discs

❑

❑

❑

❑

Do not touch the surface of the disc.

Do not drop or bend the disc.

Fingerprints and dust on the surface of a disc may cause reading errors. Always hold the disc by its edge and central hole, as shown.

Proper care of the disc is essential to its continuous reliability. Do not use solvents such as benzine, thinning agents, commercially available cleaners or anti-static spray, as they may cause damage to the disc.

For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the centre out.

If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the centre out. Wipe off any remaining moisture with a dry soft cloth.

Never put stickers on discs. This will affect the use of the disc irreparably.

❑

❑

❑

❑

On handling Memory Sticks™

Do not touch the Memory Stick™ connector with your finger or metallic objects.

Use only the label supplied with the Memory Stick™ as a label.

Do not bend, drop, or apply heavy shock to the Memory Stick™.

Do not disassemble or modify Memory Sticks™.

Precautions

❑

❑

❑

Do not let Memory Sticks™ get wet.

Do not use or store Memory Sticks™ in a location subject to:

❑ Extremely high temperatures, such as in a car parked in the sun

❑

❑

Direct sunlight

High humidity or

❑ Corrosive substances.

Use the storage case supplied with the Memory Stick™.

n

N

107

Glossary

n

N

108

Glossary

This section refers to terms used in this manual and elsewhere in the VAIO world. These terms and definitions have been compiled to provide you with a better understanding of your VAIO computer.

Term

<F1> key

10BASE-T/100BASE-TX

ACPI

Application recovery

Application recovery CD-ROM

BIOS

Definition

The <F1> key gives you access to the online help of most software.

Ethernet system providing data transfer rates of 10 Mbps (megabits per second) and

100 Mbps. The 100BASE-TX is a very direct derivative of 10BASE-T. Its 100 Mbps speed is achieved by simply sending the signal 10 times faster.

Short for Advanced Configuration and Power Interface, a power management specification.

ACPI enables the operating system to turn peripherals on and off and to control the amount of power given to each device attached to the computer. With ACPI, a CD-ROM player can be turned off by the operating system if it is not in use.

A recovery process that enables you to recover any of the applications initially available on the computer. Performing an application recovery is useful when an individual application does not run properly or to reinstall a driver when a device does not work properly. See the printed Application CD Guide for more.

CD-ROM that enables a VAIO computer user to recover most of the applications that were available when the computer was purchased. The CD-ROM is supplied with the computer.

See the printed Application CD Guide for more.

An acronym for Basic Input/Output System. The BIOS is a program that enables the computer to start when you turn it on. It monitors the data stream between the operating system and the computer’s hardware devices.

Glossary

Term

CardBus

CD-ROM

CD-RW

CNR

CPU

CRT

DC In

Driver

DVD-ROM

n

N

109

Definition

CardBus is the commercial name for an advanced PC Card. The CardBus technology allows computer users to enjoy higher performances as far as data transfer and operating speed are concerned. See PCMCIA.

Abbreviation for Compact Disc Read-Only Memory. A high-capacity optical disc, usually

650 MB in size, capable of being read from but not written to.

Short for Compact Disc-ReWriteable. Compact Disc that can be used to write or rewrite data to it. A CD-RW can be written to several times, a CD-R can only be written to once.

Short for Communication and Networking Riser. A hardware device that plugs into a motherboard and holds chips for functions like modems and audio devices.

The CPU (Central Processing Unit) is the brains of the computer; it processes the instructions of your system’s programs. The CPU is also known as the processor or microprocessor and can be found on the motherboard of your computer.

A cathode ray tube (CRT) is a specialized vacuum tube in which images are produced when an electron beam strikes a phosphorescent surface. Most desktop computer displays make use of CRTs. The CRT in a computer display is similar to the "picture tube" in a television receiver.

The Direct Current interface to which you connect your computer’s AC adapter or power cable.

A driver is software enabling you to use hardware devices. For example, in order for you to be able to use a printer, you must first install its driver. Many drivers, such as the mouse driver, come with the operating system.

Short for Digital Versatile Disc. A type of read-only CD with a minimum capacity of 4.7 GB

(maximum capacity can reach 17 GB). This high storage power makes it the ideal medium for storing films.

Glossary

Term

DVD-RW

DVD+RW

DVD±RW drive

DVI

Ethernet

EULA

Help files i.LINK™

n

N

110

Definition

Short for DVD-Rewriteable. A DVD format that allows the user to record and erase multiple times on a single DVD disc. By comparison, a DVD-R can only be written to once.

A slightly different rewritable DVD format, DVD+RW is backed by a group of companies known as the DVD+RW Consortium, which includes Sony. Its advantages include highcompatibility, high-capacity and easy-to-use functionality.

The DVD±RW drive is both a DVD-RW and DVD+RW drive.

Stands for Digital Video Interface. Accommodates analog and digital monitors with a single connector. Using a DVI connector and port, a digital signal that is sent to an analog monitor is converted into an analog signal. If the monitor is a digital monitor, such as a flat panel display, no conversion is necessary.

Ethernet is the most widely implemented local area network (LAN) technology. The Ethernet system called 10BASE-T provides data transfer rates of 10 Mbps (megabits per second). A more recent version of Ethernet, called 100BASE-T, provides data transfer rates of 100 Mbps.

Gigabit Ethernet supports data rates of 1 gigabit (1,000 megabits) per second.

EULA (End-User Licence Agreement) is the name given to a licence governing the software

on your computer. The EULA can be found in the Read this first (page 1)

section at the beginning of the software guide or directly on the VAIO desktop.

Online Help files can be found within most software applications, usually under a Help menu. They contain specific information on the software in use and can be used together with the descriptions in your online Sony Software Guide.

i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface.

The standard is regarded in the audio/video and IT industries as the most suitable interface for connecting computers and digital audio/video devices (such as digital cameras etc.).

Glossary

Term

ISP

L2 cache memory

LAN

LCD

LED

MAPI maximum RAM

Motherboard

n

N

111

Definition

An ISP (Internet Service Provider) is a company which provides you with a user name, password and telephone number in order to connect to the Internet.

Cache memory is RAM-like memory that enables quick access to data that has already been read by the computer. L1 and L2 are levels of cache memory in a computer.

A LAN (Local Area Network) is a group of computers connected together within a limited geographical area. It enables users to share devices (such as printers) and information using one processor or server.

Short for Liquid Crystal Display. Flat display technology using liquid crystals (and light polarisation) to provide sharp, flicker-free images on a screen comprised of millions of tiny cells. Colour can be produced by two basic techniques. Passive matrix is the less expensive of the two technologies. The active matrix technology (or TFT) produces better quality but is also more expensive.

Short for Light-Emitting Diode. A semiconductor device that lights up when electricity passes through it.

Short for Messaging Application Program Interface. A Microsoft Windows interface enabling you to send e-mail messages. It allows e-mail access and distribution among applications. MAPI-compatible applications include a Send Mail or Send in the File menu of the application.

The maximum amount of RAM that your computer can contain. Once this amount is reached, you can no longer add additional RAM to your computer.

The motherboard is the main circuit board inside your computer. It holds the CPU, the BIOS, the memory and so on.

Glossary

Term

MPEG

Operating system

Optical mouse

Partition

PBX

PC Card

n

N

112

Definition

MPEG or Moving Pictures Experts Group is a standard for audio-visual compression of video sequences. MPEG achieves high compression rates by storing only the changes from one frame to another. The decrease in data is generally imperceptible to the human eye.

MPEG-1 was developed for digital storage of video and audio data on CD-ROM. MPEG-2 achieves better image and audio quality and is more targeted to TV broadcasting and DVD.

The operating system is software that manages all the other programs in a computer. It defines how the computer reads and writes information to its disks (and other hardware).

Windows 2000, Windows Millennium Edition, Windows XP Professional and Windows XP

Home Edition are examples of operating systems found on VAIOs.

An optical mouse is an advanced computer pointing device that uses a light-emitting diode

(LED), an optical sensor, and digital signal processing (DSP) in place of the traditional mouse ball and electromechanical transducer. Movement is detected by sensing changes in reflected light, rather than by interpreting the motion of a rolling sphere. The optical mouse takes microscopic snapshots of the working surface at a rate of more than 1,000 images per second.

A partition is a logical division of a computer’s hard disk. A two-partition hard drive would typically contain C: and D: drives. Partitioning is particularly useful if you run more than one operating system or to clearly separate your data files from your installed software.

A PBX (Private Branch Exchange) is a private telephone network within an enterprise. Under this system, the calls between the enterprise members are local and the phone numbers are made up of 3 or 4 digits. Companies generally choose this phone system for internal communication because it is less expensive than the regular network. The users can still share a number of outside lines for making calls external to the PBX.

A PCMCIA card. The term PC Card is more widely used than PCMCIA. See PCMCIA.

Glossary

Term

PCMCIA

Pixel

Processor

Product recovery CD-ROM

PS/2

PSTN

RAM

n

N

113

Definition

PCMCIA (Personal Computer Memory Card International Association) is the name of the group that produced the specification for the credit card-sized plug-in boards for laptop computers. The cards used to be called PCMCIA cards, but as this was rather unpronounceable, these cards are now termed PC cards. An example of a PC card is a credit card-sized modem.

A pixel (Picture Element) is a part of your screen. Your screen is made up of thousands of pixels, enabling you to see colours and pictures on it. The more pixels, the higher the resolution and the better the image quality.

The processor is the brains of the computer; it processes the instructions of your system’s programs. The processor is also known as the CPU or microprocessor and can be found on the motherboard (see this word) of your computer.

The product recovery CD-ROMs include the application recovery CD-ROM and the system recovery CD-ROM(s)

A type of mouse or keyboard port, stands for Personal System 2.

PSTN (Public Switched Telephone Network) refers to the plain old telephone service, the national telecommunication networks implementing voice transmission by using analog signals.

Short for Random Access Memory, the memory used to run programs and store data in current use. RAM is the fastest kind of memory to read from and write to. Information stored in RAM is lost when you turn off the computer. The higher the RAM capacity, the faster your current data can be processed.

Glossary

Term

Resolution

RGB signal cable

Service pack 1

S-video

SDRAM

Standard RAM

System recovery

System recovery CD-ROM

n

N

114

Definition

The degree of sharpness and clarity of an image. Resolution is expressed in pixels. Frequent computer screen resolutions are 640 x 480 pixels (VGA resolution; appropriate for a 14-inch screen), 800 x 600 (appropriate for a 15-inch screen), 1,024 by 768 (appropriate for a 17-inch screen), and 1,280 by 1,024. LCD displays usually use a higher resolution than a CRT of the same size.

RGB stands for Red, Green, Blue. A cable that requires separate transmission types for the three colours on the display.

Windows XP Service Pack 1 (SP1) provides the latest security and reliability updates to the

Windows XP operating system, and includes Internet Explorer 6 SP1. Windows XP SP1 is designed to ensure Windows XP platform compatibility with newly released software and hardware, and includes updates that resolve issues discovered by customers or by Microsoft's internal testing team.

S-video stands for separated video, a video technique separating colour from luminescence rendering clearer imaging, and requiring different cables and plugs than ordinary video.

Synchronous DRAM is a kind of dynamic random access memory running at a much higher clock speed than regular memory.

The amount of RAM that is available on your computer when you purchase it.

A recovery process that enables you to recover the hard disk image initially available on the computer. Performing a system recovery is useful in the event of a serious system crash or if you want to modify the size of your partitions.

CD-ROM that is supplied with your computer and that enables a VAIO computer user to recover the hard disk image that was available when the computer was purchased.

Glossary

Term

UPS

USB

VAIO

VGA

WAN

XGA

n

N

115

Definition

A UPS (Uninterruptible Power Supply) is a device including a battery that protects your computer from data loss in the event of a power failure. The battery takes over as soon as a power interruption is detected. If you are using the computer when the power failure occurs, you have time to save all unsaved data and to shut down your computer.

USB (Universal Serial Bus) is a hardware interface for attaching devices (such as a keyboard, mouse, joystick, scanner or printer). You can connect up to 127 devices to a USB port. The

USB standard is Hot Plug and Play.

Short for Video Audio Integrated Operation. Brand name covering Sony's PC products, peripherals, accessories and software. VAIO-branded items are all designed to make the best use of Sony's Audio-Video (AV) and Information Technology (IT) skills.

The Video Graphics Array (VGA) display system has become the accepted minimum standard for PCs. You can choose between 16 colours at 640 x 480, or 256 colours at 320 x 200.

WAN (Wide Area Network) is a computer network connected together and covering a relatively large geographical area. This is in contrast to LAN, where the network is usually set up within one building or small geographical area. The largest existing WAN is the

Internet.

Short for Extended Graphic Array, a graphics standard. An XGA board can provide up to

1,024 x 768 pixels and supports up to 65 thousand colours.

Sony PCV-RZ series Personal Computer User manual

Sony VAIO Desktop

User Guide

Read this first

Notice

Trademarks

E

NERGY

S

TAR

®

Environmental information

Safety information

Warnings

Regulatory information

Disposing of the internal memory backup battery

Welcome

Documentation pack

Printed documentation

Online documentation

Your Sony VAIO desktop and its accessories

Ergonomic considerations

Using your VAIO desktop

Locating connectors

Starting your computer

Shutting down your computer

Using the keyboard

Combinations and functions with the Windows

key

Combinations and functions with the <Fn> key

ScrLk

Indicators

Using the shortcut keys

Setting up the monitor

Connecting the monitor

Using the TV function

Copyright protection

Starting to use Giga Pocket

Using the remote control

Using the optical mouse

Using the DVD drives

What (re)writable DVD formats can I use?

What (re)writable CD formats can I use?

Writing CDs and DVDs

Playing DVDs

Using the floppy disk drive

Inserting a floppy disk

Removing a floppy disk

Using the modem

Expansion capabilities

Using the Memory Stick™

Why Memory Stick™?

Generic Memory Stick™

MagicGate Memory Stick™

Compatible devices

Write-protecting a Memory Stick™

Inserting a Memory Stick™

Removing a Memory Stick™

Using PC Cards

Inserting a PC Card

Removing a PC Card

Using power saving modes

Using Standby mode

Using Hibernate mode

Connecting peripheral devices

Notes on connecting Universal Serial Bus (USB) devices

Connecting an external display

Connecting a projector

Connecting a TV

Connecting an external microphone

Connecting a printer

Connecting a USB printer

Connecting an i.LINK™ device

Connecting a digital video camera recorder

Connecting two VAIO computers

Connecting to a network

Getting help

Sony's support options

Sony documentation

Other sources of information