PCI Express V.92 56K Internal Data/Fax Modem

PEX56KIM

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

For the most up-to-date information, please visit: www.startech.com

Manual Revision: 01/22/2014

*actual product may vary from photos

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Part 68 Statement

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.

On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

This equipment uses the following Universal Service Order Code (USOC) jacks: RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g.,

03 is a REN of 0.3). If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will

Instruction Manual

provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information, please contact

StarTech.com at 1-800-265-1844. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

There are no serviceable parts in this equipment.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.

If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

US: STAMM02BPEX56KIM

Industry Canada CS03 Statement

This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.

The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. / L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas cinq.

IC: 11232A-PEX56KIM

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Instruction Manual

3

Table of Contents

Introduction ............................................................................................2

Packaging Contents ................................................................................................................................. 2

System Requirements .............................................................................................................................. 2

Installation .............................................................................................2

Hardware Installation .............................................................................................................................. 2

Driver Installation ...................................................................................................................................... 3

Verifying Installation .............................................................................6

Specifications ..........................................................................................7

Technical Support ..................................................................................8

Warranty Information ............................................................................8

Instruction Manual

1

Introduction

Packaging Contents

• 1 x PCI Express Modem

• 1 x RJ11 Cable

• 1 x Low-Profile Bracket

• 1 x Driver CD

• 1 x Instruction Manual

System Requirements

• Available PCI Express slot

Installation

Hardware Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also be careful to handle the card by its edges and not the gold connectors.

1. Turn your computer off and any peripherals connected to the computer (i.e. Printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. See documentation for your computer system for details.

3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the computer case (Refer to documentation for your computer system for details.). Note that this card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).

4. Insert the card into the open PCI Express slot and fasten the bracket to the rear of the case.

NOTE: If installing the card into a low profile desktop system, replacing the preinstalled standard profile bracket with the included low profile (half height) installation bracket may be necessary.

Instruction Manual

2

5. Place the cover back onto the computer case.

6. Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1.

7. Connect a standard telephone cable (included) from the “Line” port on the card to the telephone outlet on the wall. If you wish to also have a telephone connected to this outlet, connect the telephone to the “Phone” port on the card.

NOTE: Telephone pass through works even if computer is powered off.

Driver Installation

Windows® 8 / 7 / Vista / Server 2008 R2

Note: The modem may auto-install using native drivers, however it is recommended to use the procedure below to update to the latest version.

1. Upon starting Windows, if the Found New Hardware dialog appears on the screen, cancel/close the window and insert the included Driver CD into the computer’s CD/

DVD drive.

2. Open the Device Manager by right-clicking on Computer, and then select Manage.

In the new Computer Management window, select Device Manager from the left window panel (For Windows 8, open the Control Panel and select Device

Manager).

3. Expand the Modems section, right-click on the newly detected “PCIe CX9S610 Soft

Modem” device and select Update Driver Software, which will start the Update

Driver Software Wizard.

4. On the How do you want to search for driver software? window, click Browse

my computer for driver software, then Let me pick from a list of device drivers

on my computer.

Instruction Manual

3

5. From the next screen labeled Select your device’s type from the list below, select

Show All Devices (should be highlighted by default), and then click Next.

Note: This screen does not appear on all systems, move on to the next step if this does not apply.

6. On the Select the Device Driver you want to install for this hardware screen, click the Have Disk button.

7. Click Browse from the Install from Disk dialog box that pops up.

8. From the Locate File dialog window that opens, navigate to “D:\PCI-E FAX MODEM\”, then double-click the appropriate 32 or 64-bit OS folder for the system you are using.

9. Select the file “PRANCMxx.inf” in the folder and click the Open button.

10. Click the OK button on the Install From Disk dialog box which will close

the window.

11. Once back at the Select the Device Driver you want to install for this hardware

screen, click Next and then Close once the driver has installed.

Windows XP

Note: The modem may auto-install using native drivers, however it is recommended to use the procedure below to update to the latest version.

1. Upon starting Windows, if the Found New Hardware dialog appears on the screen, cancel/close the window and insert the included Driver CD into the computer’s

CD/DVD drive.

Instruction Manual

4

2. Open the Device Manager by right-clicking on My Computer, and then select

Manage. In the new Computer Management window, select Device Manager from the left window panel.

3. Expand the Modems section, right-click on the newly detected “PCIe CX9S610

Soft Modem” device and select Update Driver, which will start the Hardware

Update Wizard.

4. On the main Hardware Update Wizard window, select Install from a list or specific

location (Advanced), then click Next.

5. On the next screen, select Don’t search, I will choose the driver to install and click Next.

6. From the next screen labeled Hardware Type, select Show All Devices (should be highlighted by default), and then click Next.

Note: This screen does not appear on all systems, move on to the next step if this does not apply.

7. On the Select the Device Driver you want to install for this hardware screen, click the Have Disk button.

8. Click Browse from the Install from Disk dialog box that pops up.

9. From the Locate File dialog window that opens, navigate to “D:\PCI-E FAX MODEM\

Win2k_XP” or “\WinXP64” as appropriate for the system you are using.

10. Select the file “PRANCMxx.inf” and click the Open button.

Instruction Manual

5

Verifying Installation

Windows

1. Open the Device Manager by right-clicking on Computer, and then select Manage.

In the new Computer Management window, select Device Manager from the left window panel (For Windows 8, open the Control Panel and select Device Manager).

2. Expand the “Modems” section. On a successful install, you should following devices in the list with no exclamation points or question marks.

Instruction Manual

6

Specifications

Bus Type

Card Type

Chipset ID

Port Style

Ports

Connector Type(s)

External Port(s)

Maximum Data Transfer Rate

Modulation

Dimensions (L x W x H)

Weight

Humidity

Operating Temperature

Storage Temperature

Compatible Operating Systems

PCI Express

Standard Profile (LP bracket incl.)

Conexant - CX95610

Integrated on Card

2

1x PCI Express x1 Male

2x RJ-11 Female

56 Kbps Down

48 Kbps Up

14.4 Kbps Fax

Modem Modulation: ITU-T V.92, V.90, V.34,

V.32bis, V.32, V.22bis,V.22, V.23, V.21

Fax Modulation: ITU-T V.17, V.29, V.27 Ter, and V.21 channel 2

Data Compression: V.44

60 x 19 x 67 mm

1.3 oz [37 g]

10-90% RH

0°C to 40°C (32°F to 104°F)

-40°C to 70°C (-40°F to 158°F)

Windows® 8 (32/64bit), 7 (32/64),

Vista(32/64), XP(32/64)

Windows® Server 2008 R2, 2003(32/64)

Instruction Manual

7

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Instruction Manual

8

Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.