WIFI CHANNEL SET UP
Fritz!Box 7360 WiFi Modem & Home Media Hub
Digiweb Technical Support
[email protected]
V1.
1. Open a web browser and enter the following address into the address bar (where you normally have the full www website address): 192.168.178.1
2. This should present you with a login for modem. The password for login is 1234
3. In the main Fritz menu, on the left hand side, click the fifth entry 'WLAN'
4. Click on the Radio Channel button.
5. Find the Radio Channel Selection option and Change this to Adjust radio channel
settings and using the drop down menu you can choose a new channel. First try channels 1, 6 or 11.
6. Click Apply to confirm the change. Then wait 60 - 120 seconds for your computer to automatically pick up the new settings and reconnect to your wifi network.
7. You can also use the Graph at the bottom of the page to select the best channel for your connection, free from interference from other networks.
