LG 25UM65-P Owner's manual Owner's manual
Advertisement
Advertisement
Owner's Manual
IPS LED MONITOR
(LED MONITOR)
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
25UM64
25UM65
34UM65
www.lg.com
2 Table of ConTenTs
Table of ConTenTs
lICense
asseMblInG anD
PRePaRInG
5 Product and Button Description
6 - How to Use the Joystick Button
18 - Installing the Wall Mount Plate
20 - Using the Kensington Lock
UsInG THe MonIToR
InsTallInG THe lG
MonIToR sofTWaRe
UseR seTTInGs
TRoUblesHooTInG
PRoDUCT sPeCIfICaTIon
(Preset Mode, DVI-D/HDMI/DisplayPort
PRoPeR PosTURe
41 Proper Posture for Using the Monitor
WaRnInG: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
lICense 3
lICense
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association.
4 asseMblInG anD PRePaRInG
asseMblInG anD PRePaRInG
Product Composition
Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here.
CD (owner's Manual / software) / Guides /
Cards
Power cord aC/DC adapter
(Depending upon country) or aC/DC adapter
(Depending upon country)
HDMI cable
25UM65
25UM64 stand base
34UM65 stand body screw Cover
Two screws
(M4 x 10) stand base screw Cover
Two screws
(M4 x 10)
Clear sheet
CaUTIon y Always use genuine LG components to ensure safety and product performance.
y The product warranty will not cover damage or injury caused by the use of unauthorized components.
asseMblInG anD PRePaRInG 5 noTe y The components may look different from those illustrated here.
y Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
y To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.
y The power cord provided may differ depending upon the region.
Product and button Description
25UM65 25UM64
Power Indicator y on Power on y off Power off noTe y The joystick button is located at the bottom of the monitor.
Joystick button
6 asseMblInG anD PRePaRInG
34UM65
Power Indicator y on Power on y off Power off
Joystick button noTe y The joystick button is located at the bottom of the monitor.
How to Use the Joystick button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
basic functions
Power on
Press the joystick button once with your finger to turn on the monitor.
◄/►
Power off
Press and hold the joystick button once with your finger to turn off the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
Input Connector
25UM65 25UM64 asseMblInG anD PRePaRInG 7
34UM65
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DC-IN
(19 V )
H/P
DVI-D IN
DP IN
HDMI IN 1
AUDIO IN
(PC)
DC-IN
(19 V )
H/P
8 asseMblInG anD PRePaRInG
Moving and lifting the
Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.
y Place the monitor in the original box or packing material before attempting to move it.
y Before moving or lifting the monitor, disconnect the power cord and all other cables.
y Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
y When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CaUTIon y Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create images.
y When holding the monitor, the screen should face toward you to prevent it from being scratched.
y When transporting the monitor, do not expose the monitor to shock or excessive vibration.
y If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
asseMblInG anD PRePaRInG 9
Installing the Monitor
assembling the stand
CaUTIon y Applying excessive force when tightening screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
y If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury.
In addition, this may cause the joystick button to malfunction.
25UM65 25UM64
1 Place the screen face down.
CaUTIon y To protect the screen from scratches, cover the surface with a soft cloth.
2 Check the direction of the stand body (front, back) and then mount the stand body onto the stand hinge.
3 Tighten two screws into the back of the stand body and close the screw cover.
screw Cover stand body stand Hinge
10 asseMblInG anD PRePaRInG
4 Fix the stand base to the stand body. Turn the screws on the stand base to the right.
stand body stand base
or asseMblInG anD PRePaRInG 11
34UM65
1 Place the screen face down.
100 mm
(3.9 inch) stand Hinge
CaUTIon y To protect the screen from scratches, cover the surface with a soft cloth.
2 Mount the stand base onto the stand hinge as shown in the illustration. Fix two screws into the back of the stand base and close the screw cover.
screw Cover
CaUTIon y The stand height is adjustable by 20 mm
(0.7 inch).
y When tightening the screws after mounting the stand base onto the stand hinge, be sure to hold the stand base with your hand. Otherwise, the product may fall, causing personal injury or damage to the product.
y Be careful not to hurt your hand on the edges of the screw covers.
stand base
120 mm
(4.7 inch)
12 asseMblInG anD PRePaRInG
Detaching the stand
CaUTIon y Illustrations in this document represent typical procedures, so they may look different from the actual product.
y Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
y When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
y If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
25UM65 25UM64
1 Place the screen face down.
CaUTIon y To protect the screen from scratches, cover the surface with a soft cloth.
2 Turn the screws on the stand base to the left to detach the stand base from the stand body.
stand body stand base
3 Lift up the screw cover to detach the screw cover from the stand body. Remove the screws from the back of the stand body using a screwdriver and detach the stand body from the stand hinge as shown in the illustration.
stand body stand Hinge asseMblInG anD PRePaRInG 13 screw Cover
14 asseMblInG anD PRePaRInG
34UM65
1 Place the screen face down.
CaUTIon y To protect the screen from scratches, cover the surface with a soft cloth.
2 Detach the screw cover from the stand base as shown in the illustration and then remove the two screws on the back to detach the stand base from the hinge.
stand base
CaUTIon y When removing the screws to detach the stand base from the hinge, be sure to hold the stand base with your hand. Otherwise, the product may fall, causing personal injury or damage to the product.
screw Cover
Installing on a Table
1 Lift the monitor and place it on the table in an upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient ventilation.
25UM65 25UM64
10 cm (3.9 inch)
10 cm
10 cm
10 cm asseMblInG anD PRePaRInG 15
2 Connect the power adapter to the monitor and then plug the power cord into the wall outlet.
25UM65 25UM64 or
34UM65
34UM65
10 cm (3.9 inch)
10 cm
10 cm
10 cm
3 Press the joystick button on the bottom of the monitor to turn on the monitor.
CaUTIon y Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
16 asseMblInG anD PRePaRInG
adjusting the angle
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 20° for a comfortable viewing experience.
25UM65 25UM64
20 -5
WaRnInG y When you adjust the angle, do not hold the stand as shown on the following illustration.
You may injure your fingers.
25UM65 25UM64
20 -5
34UM65
20 -5
20 -5
15 -5
Rear front
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience.
34UM65
15 -5
20 -5 y Be careful not to touch or press the screen area when adjusting the angle of the monitor.
25UM65 25UM64
15 -5
Rear front
34UM65
asseMblInG anD PRePaRInG 17
Tidying up Cables
Tidy up cables using the cable holder on the stand base as shown in the illustration.
25UM65 25UM64 noTe y Cables can get caught in the hinge area as shown in the illustration, so be careful when organizing cables.
34UM65
34UM65
18 asseMblInG anD PRePaRInG
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth.
2 Attach the clear sheet to the back of the monitor and align it with the screw holes.
(Only 34UM65)
Clear sheet
(PeT sheet)
Installing on the Wall
Install the monitor at least 10 cm (3.9 inch) away from the wall and leave about 10 cm (3.9 inch) of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store.
Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
10 cm (3.9 inch)
3 Place the wall mount plate onto the monitor and align it with the screw holes.
4 Tighten the four screws to fix the plate to the monitor using a screwdriver.
Wall mount plate noTe y The wall mount plate is sold separately. y For more information on installation, refer to the wall mount plate's installation guide.
y Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1 Use the screws and wall mounting bracket that conform to VESA standards.
2 If you use screws longer than the standard length, it may damage the inside of the product.
3 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.
4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.
5 Use the wall mount plate and fixing screws that conform to VESA standards as specified below.
y 784.8 mm (30.9 inch) or less
* Thickness of the wall mount plate: 2.6 mm
(0.1 inch)
* Fixing screw: Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm (Diameter 0.15 inch x
Pitch 0.02 inch x Length 0.39 inch) y 787.4 mm (31.0 inch) or more
* Use the wall mount plate and screws that conform to VESA standards.
Model
Vesa (a x b) stand screw
Required screws
Wall Mount Plate
(optional) y VESA (A x B)
25UM65
25UM64
75 x 75
34UM65
100 x 100
M4
4
RW120
A
B asseMblInG anD PRePaRInG 19
CaUTIon y Unplug the power cord before moving or installing the monitor to avoid electric shock.
y Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
y Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty. y Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty.
y When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm (0.3 inch) noTe y Use the screws specified by VESA standards.
y The wall mount kit includes the installation guide and all necessary parts.
y The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
y The length of the screw may differ for each wall mounting bracket. Be sure to use the proper length.
y For more information, please refer to the user manual for the wall mounting bracket.
20 asseMblInG anD PRePaRInG
Using the Kensington lock
The connector for the Kensington security system is located at the back of the monitor.
For more information on installation and usage, refer to the Kensington lock owner's manual or visit the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
25UM65 25UM64
34UM65 noTe y The Kensington security system is optional.
You can obtain optional accessories from most electronics stores.
UsInG THe MonIToR 21
UsInG THe MonIToR
y The following instructions are based on the
25UM65 model. Illustrations in this manual may differ from the actual product.
Press the joystick button, go to Menu → Easy control → Input, and then select the input option.
CaUTIon y Do not press the screen for a prolonged time.
This may cause image distortion.
y Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible.
noTe y When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.
y The monitor may flicker when turned on in an area where the temperature is low. This is normal.
y Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a PC
y This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers.
DVI Connection
Transmits digital video signals to the monitor. Connect the monitor using the DVI cable as illustrated below.
To hear sound in DVI input mode, connect the
PC's AUDIO OUT port to the monitor's AUDIO IN
(PC) port using the audio cable.
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
H/P
DC-IN
(19 V )
(sold separately)
DVI-I(D) OUT
PC
AUDIO OUT
PC
CaUTIon y Connect the input signal cable and
DVI-D IN HDMI IN 2 as shown in the illustration. To prevent disconnection, secure the cable tightly.
AUDIO IN(PC)
H/P noTe y Using a DVI to HDMI cable may cause compatibility issues.
DC-IN
(19 V )
DP OUT
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DC-IN
(19 V )
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DC-IN
(19 V )
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
DVI-I(D) OUT
PC
AUDIO OUT
PC
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DC-IN
(19 V )
H/P
22 UsInG THe MonIToR
DVI-D IN
HDMI Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor using the HDMI cable as shown in the illustration below.
HDMI IN 2
AUDIO IN(PC)
DP IN
DC-IN
(19 V )
HDMI IN 1
H/P
DisplayPort Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect the monitor to your PC using the display port cable as shown in the illustration below:
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
(sold separately)
CaUTIon y Connecting your PC to the monitor using the
HDMI cable may cause device compatibility issues.
y Using a DVI to HDMI cable may cause compatibility issues.
DP OUT noTe y There may be no video or audio output depending on the DP (DisplayPort) version of the
PC.
HDMI IN 1
DC-IN
(19 V )
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
DP OUT
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DC-IN
(19 V )
H/P
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DVI-D IN
H/P
DC-IN
(19 V )
HDMI IN 2
DP IN
HDMI IN 1
AUDIO IN(PC)
H/P
DVI-D IN
DC-IN
(19 V )
DP IN
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DVI-D IN
H/P
DC-IN
(19 V )
DP IN
HDMI IN 2
HDMI IN 1
AUDIO IN(PC)
H/P
DC-IN
(19 V )
DVI-I(D) OUT
PC
DVI-D IN
DVI-D IN
DP IN
AUDIO OUT
PC
DVI-I(D) OUT
PC
AUDIO OUT
PC
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
DVI-D IN
H/P
DP IN
DC-IN
(19 V )
HDMI IN 2
AUDIO IN(PC)
HDMI IN 1
H/P
DC-IN
(19 V )
UsInG THe MonIToR 23
DP OUT
DP IN
HDMI IN 2
HDMI IN 1
DVI-D IN
Connecting aV Devices Connecting Peripherals
HDMI Connection
H/P
HDMI transmits digital video and audio signals from your AV device to the monitor. Connect your
AV device to the monitor using the HDMI cable as shown in the illustration below.
(19 V )
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
DP IN
DC-IN
(19 V )
HDMI IN 1
Connecting Headphones
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
HDMI IN 2
AUDIO IN(PC)
DC-IN
(19 V )
HDMI IN 1
DVI-D IN
DP IN
HDMI IN 2
AUDIO IN(PC)
H/P
HDMI IN 1
H/P H/P
DC-IN
(19 V )
(sold separately) noTe y Peripheral devices are sold separately.
y If you use Angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use Straight earphones. noTe y Using a DVI to HDMI cable may cause compatibility issues.
angled straight y Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited.
24 InsTallInG THe lG MonIToR sofTWaRe
InsTallInG THe lG MonIToR sofTWaRe
Insert the Software CD included in the product packaging into your PC's CD drive and install the LG Monitor
Software.
1 Set up Internet Explorer as the default web browser.
3 Follow the instructions to proceed with the installation.
2 Click lG Monitor software on the CD's main screen. When the file download window appears, click Run. (Although the screen below may differ depending on your operating system or Internet Explorer version, the installation methods are the same.)
4 Check the "I accept the terms of the agreement" checkbox on the License Agreement screen and then click the next button.
5 Select the program that you want to install.
CaUTIon y Windows 7 must be updated to Service Pack
1 or higher.
InsTallInG THe lG MonIToR sofTWaRe 25 noTe y Screen Split: This program automatically splits the program window as desired.
y Auto Resolution: This is a program that automatically changes the resolution to the optimal settings when connecting the monitor to the
PC in PBP mode.
※ This program is not supported in Clone
Mode.
※ Extended Mode is not supported when using a single display.
6 The LG Monitor Software starts the installation as shown below:
8 When the installation is complete, restart the system.
noTe y When you run Screen Split, the Screen Split icon [ ] appears in the system tray at the bottom right of the PC screen. y Right-click the Screen Split icon and select the desired layout.
7 The program you selected on the FUNCTION page will install automatically.
26 UseR seTTInGs
UseR seTTInGs activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
button
Joystick button
Main menu enabled
Description
Enables the main menu.
Exits the main menu
(Holding down the button to turn off the monitor: You can turn off the monitor this way at any time, including when the OSD is on)
Main menu disabled Adjusts the monitor volume level.
◄
Menu status
Main menu disabled
Main menu enabled Enters the menu features.
►
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the PBP feature.
▲
Main menu disabled Enables the main menu.
Main menu enabled Enters the reader feature.
Main menu disabled Enables the main menu.
▼
Main menu enabled Turns off the monitor.
Main Menu features
Menu
Reader exit
PbP
Main Menu
Menu
Reader
PbP
Monitor off exit
Description
Configures the screen settings.
Adjusts color for comfortable text file reading.
Displays the screens of two input modes on one monitor.
Turns off the monitor.
Exits the main menu.
Monitor off
long press: Monitor off
UseR seTTInGs 27
User settings
Menu settings
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the
Menu.
2 Configure the options by moving the joystick up/down/left/right.
3 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4 If you want to exit the OSD menu, move the joystick to ◄ until you exit. y When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen.
easy control function PbP screen settings Reset
Each option is described below.
Menu easy control brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
noTe y You can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume menu.
function
PbP screen settings
Reset
◄
Input
Ratio
PbP
Picture
Color exit
Selects the input mode.
Adjusts the aspect ratio of the screen.
Adjusts Super Energy Saving and Picture Modes.
Displays the screens of two input modes on one monitor.
Adjusts the Sharpness, Black level and Response Time of the screen.
Adjusts Gamma, Color Temperature, Red, Green, Blue and Six Color.
Adjusts Main Audio, Language, Power LED and OSD Lock.
Restores the default settings.
Exits the OSD menu.
28 UseR seTTInGs
Ratio
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to easy control > Ratio by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
easy control brightness easy control
Contrast function
Volume
Input
Ratio
PbP screen settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > easy control > Ratio
Wide original
Cinema 1
Cinema 2
1:1
Description
Displays the video in widescreen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for subtitles. (at 1080p)
The aspect ratio is not adjusted from the original.
noTe y The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
(2560 x 1080). y The ratio is disabled in the interlaced signal.
100
>
70
>
30
>
DVI-D >
Wide
>
UseR seTTInGs 29
function
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to function by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
function super energy saving easy control
Picture Mode function
PbP screen settings
Reset low
>
Custom
>
▲/▼: Move / ►: OK ◄: Back
Each option is described below.
Menu > function super energy saving
Picture Mode
High low off
Custom
Photo
Cinema
Game
Description
Saves energy using the high-efficiency Super Energy Saving feature.
Saves energy using the low-efficiency Super Energy Saving feature.
Disables the Super Energy Saving feature.
Allows the user to adjust settings. You can adjust the color mode of the main menu.
Optimizes the screen for photos.
Optimizes the screen for videos.
Optimizes the screen for games.
30 UseR seTTInGs
PbP
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to PbP by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
PbP
PbP easy control
Input function audio swap
PbP sub full
Ratio screen settings
PbP Preview
Reset
DVI-D
▲/▼: Move / ►: OK ◄: Back off
>
>
HDMI
>
>
Each option is described below.
Menu > PbP
PbP
Input audio swap sub full
Ratio
Description
Displays the screens of two input modes on one monitor.
PbP Connection
Main screen
(left)
Main
DVI
HDMI 1
HDMI 2
DisplayPort
DVI
-
O
X
O sub screen (Right)
HDMI 1
O
-
O
O
Selects the video signal input of the main screen.
HDMI 2
X
O
-
O sub Selects the video signal input of the sub screen.
Changes the audio output in PBP mode.
Toggles between the main screen and sub screen in PBP mode.
Converts the sub screen in PBP mode to wide screen.
DisplayPort
O
O
O
-
Adjusts the aspect ratio of the main screen or sub screen.
Main Wide Displays the video to fit the PBP screen, regardless of the video signal input. original sub Wide
Displays the video in the aspect ratio of the video signal input on the PBP screen.
Displays the video to fit the PBP screen, regardless of the video signal input.
original Displays the video in the aspect ratio of the video signal input on the PBP screen.
noTe y When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The
Main/Sub options for Ratio become disabled if there is no signal.
Picture
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to screen > Picture by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
screen
Picture easy control
Color function
PbP screen settings
Reset
UseR seTTInGs 31
>
>
▲/▼: Move / ►: OK ◄: Back
Each option is described below.
Menu > screen > Picture sharpness black level
Response Time
Description
Adjusts the sharpness of the screen.
Sets the offset level (for HDMI only).
• offset: as a reference for a video signal, this is the darkest color the monitor can display.
High low
The picture of the screen gets brighter.
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Middle. For a fast-moving picture, it is recommended that you use High.
Setting to High may cause image sticking.
High
Middle low off
Sets the response time to High.
Sets the response time to Middle.
Sets the response time to Low.
Does not use the response time improvement feature.
32 UseR seTTInGs
Color
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to screen > Color by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
screen
Picture easy control
Color function
PbP screen settings
Reset
>
>
▲/▼: Move / ►: OK ◄: Back
Each option is described below.
Menu > screen > Color
Gamma
Color Temp.
Description
Custom gamma settings: When using the gamma 0, gamma 1 and gamma 2 monitor settings, higher gamma settings mean a brighter image is displayed and vice versa.
Selects the factory default picture color.
Custom
Warm
Medium
Sets the screen color to a reddish tone.
Sets the screen color to between a red and blue tone.
Cool Sets the screen color to a bluish tone.
You can customize the picture color using Red, Green and Blue colors.
Red
Green blue six Colors
Reset
Meets the user requirements for colors by adjusting the tone and saturation of the six colors
(red, green, blue, cyan, magenta and yellow) and then saving the settings.
Hue Adjusts the tone of the screen colors.
saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated and darker the colors become.
Returns color to the default settings.
settings
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to settings by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
settings
Main audio easy control language function
Power leD osD lock
PbP screen settings
Reset
UseR seTTInGs 33
> english
> off
> off >
▲/▼: Move / ►: OK ◄: Back
Each option is described below.
Menu > settings
Main audio language
Power leD osD lock
Description
Outputs audio from digital input ports (HDMI, DisplayPort and Audio-in) to the monitor speakers.
Sets the menu screen to the desired language.
Turns the power indicator on the front of the monitor on or off.
on off
The power LED turns on automatically.
The power LED turns off.
Prevents incorrect key input.
on off
Disables key input
Enables key input noTe y All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings, and the Exit button.
34 UseR seTTInGs
Reset
1 To view the osD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
2 Go to Reset by moving the joystick.
3 Configure the options following the instructions that appear in the bottom right corner.
4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
Reset
Do you want to reset your settings?
easy control
Reset
Cancel function
PbP screen settings
Reset
▲/▼: Move / ►: OK ◄: Back
Each option is described below.
Menu > Reset
Do you want to reset your settings?
Reset
Cancel
Restores the default settings.
Cancel the reset.
Description
UseR seTTInGs 35
Reader
Reader Mode
1 Press the joystick button on the bottom of the monitor.
2 Go to Reader by moving the joystick button to ▲.
Reader 1 Reader 2 Reader off
◄ / ►: Change Mode : oK
3 Configure the options following the instructions that appear in the bottom right corner.
Each option is described below.
Reader Mode
Reader 1
Reader 2
Reader off
Description
Optimizes the screen for browsing newspapers. You can brighten the screen in the OSD menu.
Optimizes the screen for looking at cartoons. You can brighten the screen in the OSD menu.
Reader Mode is off.
36 TRoUblesHooTInG
TRoUblesHooTInG
nothing is displayed on the screen.
Is the monitor's power cord plugged in?
y Check if the power cord is correctly plugged into the power outlet.
Is the power indicator on?
y Check the power cable connection and press the power button.
Is the power on and the power indicator displaying white?
Is the power indicator blinking?
y Check that the connected input is enabled (Menu - Input).
Is the sage being displayed?
Is the
oUT of RanGe mes-
no signal message being displayed?
y If the monitor is in power-saving mode, move the mouse, or press any key on the keyboard, to switch the display on.
y Check if the computer is turned on.
y This occurs when signals transferred from the PC (video card) are out of the horizontal or vertical frequency range of the monitor.
Please see the Product specification section of this manual to set the appropriate frequency.
y This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
The osD locked message is being displayed.
Are some functions not available when you press the Menu button?
y The OSD is locked. Go to Menu > Settings and set osD lock to Off.
The screen retains an image.
Does image sticking occur even when the monitor is turned off?
y Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
y To extend the lifetime of the monitor, use a screensaver.
screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
y If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080P or the recommended resolution.
noTe y Vertical frequency In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz.
y Horizontal frequency The time it takes to display one horizontal line is called the horizontal cycle. If
1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second.
This is called horizontal frequency and is represented by Hz.
TRoUblesHooTInG 37 noTe y Check if the video card's resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution in Control Panel > Display > settings.
y Not setting the video card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
y The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the video card. If this is the case, contact the manufacturer of the computer or video card for assistance.
y Some video cards may not support 2560 x 1080 resolution. If the resolution cannot be displayed, contact the manufacturer of your video card.
The display color is abnormal.
Does the display appear discolored (16 colors)?
Does the display color appear unstable or monochrome?
Are there spots on the screen?
y Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality.
y Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC's video card.
y When using the monitor, pixilated spots (red, green, blue, white or black) may appear on the screen. This is normal for an LCD screen.
It is not an error, nor is it related to the monitor's performance.
38 PRoDUCT sPeCIfICaTIon
PRoDUCT sPeCIfICaTIon
25UM65 25UM64
LCD Screen
Resolution
Type 63.5 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 63.5 cm
25" class (25" / 63.5 cm diagonal)
0.2325 mm x 0.2325 mm Pixel Pitch
Max Resolution 2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Video Signal Horizontal Frequency
Vertical Frequency
30 kHz to 90 kHz
56 Hz to 75 Hz
Synchronization Separate Sync.
Input Connector DVI-D IN, DP (DisplayPort) IN, HDMI IN 1, HDMI IN 2, AUDIO IN(PC), H/P OUT
Power Sources Power Rating
Power Consumption
(Typical)
19 V 1.6 A
Operating Mode: 31 W (Typical)
36 W (Max, Audio Output 50%)
Power Saving Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
AC/DC Adapter LCAP21A type, manufactured by Lien Chang
ADS-40SG-19-3 19032G type, manufactured by Honor
ADS-40FSG-19 19032GPG-1 type, manufactured by Honor
Output: 19 V 1.7 A
Stand Angle
Environmental
Conditions
Audio Output
Forward/Backward: -5° to 20° (Head)
Operating Conditions
Storing Conditions
3 W + 3 W
Temperature: 10°C to 35°C (50°F to 95°F)
Humidity: 10% to 80%
Temperature: -20°C to 60°C (-4°F to 140°F)
Humidity: 5% to 90%
Dimensions
Weight (Without
Packaging)
Monitor Size (Width x Height x Depth)
With Stand
Without Stand
With Stand
609.0 mm x 383.0 mm x 188.4 mm
(23.9 inch x 15.0 inch x 7.4 inch)
609.0 mm x 281.4 mm x 55.9 mm
(23.9 inch x 11.0 inch x 2.2 inch)
4.1 kg (9.0 lb)
Without Stand 3.78 kg (8.3 lb)
Specifications are subject to change without notice.
PRoDUCT sPeCIfICaTIon 39
34UM65
LCD Screen
Resolution
Type
Pixel Pitch
Max Resolution
86.6 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 86.6 cm
34" class (34.1" / 86.6 cm diagonal)
0.312 mm x 0.310 mm
2560 x 1080 @ 60 Hz
Video Signal
Environmental
Conditions
Recommended Resolution 2560 x 1080 @ 60 Hz
Horizontal Frequency 30 kHz to 90 kHz
Vertical Frequency
Synchronization
56 Hz to 75 Hz
Separate Sync.
Input Connector DVI-D IN, DP (DisplayPort) IN, HDMI IN 1, HDMI IN 2, AUDIO IN(PC), H/P OUT
Power Sources Power Consumption
(Typical)
Operating Mode: 48 W (Typical)
57 W (Max, Audio Output 50%)
Power Saving Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
AC/DC adapter LCAP39 type, manufactured by Lien Chang
DA-65G19 type, manufactured by APD
Output: 19 V 3.42 A
Stand Angle Forward/Backward: -5° to 15° (Monitor)
Operating Conditions
Storing Conditions
Temperature: 10°C to 35°C (50°F to 95°F)
Humidity: 10% to 80%
Temperature: -20°C to 60°C (-4°F to 140°F)
Humidity: 5% to 90%
Audio Output 7 W + 7 W
Dimensions
Weight (Without
Packaging)
Monitor Size (Width x Height x Depth)
With Stand 829.9 mm x 468.9 mm x 172.9 mm
(32.6 inch x 18.4 inch x 6.8 inch)
Without Stand
With Stand
829.9 mm x 379.8 mm x 82.9 mm
(32.6 inch x 14.9 inch x 3.2 inch)
7.3 kg (16.0 lb)
Without Stand 6.3 kg (13.8 lb)
Specifications are subject to change without notice.
40 PRoDUCT sPeCIfICaTIon
factory support Mode
(Preset Mode, DVI-D/HDMI/DisplayPort PC)
Preset Mode
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 1024
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
2560 x 1080
45
63.981
79.976
60.0
65.29
67.5
66.7
Horizontal frequency
(kHz)
31.468
31.469
37.5
37.879
46.875
48.363
60.123
67.5
60
60.02
75.025
60.0
59.954
60
60
Vertical frequency
(Hz)
70.08
59.94
75.0
60.317
75.0
60.0
75.029
75.0
* DVI: DTV Mode is not supported (interlace mode)
Polarity (H/V) Remarks
+/+
+/+
+/+
+/+
-/+
+/-
+/+
-/-
+/+
+/+
-/+
-/-
-/-
+/+
-/+
HDMI Timing (Video)
Preset Mode
480P
576P
720P
720P
1080P
1080P
Horizontal frequency
(kHz)
31.5
31.25
37.5
45
56.25
67.5
50
50
60
50
60
Vertical frequency
(Hz)
60
Remarks
Power leD
Mode
On Mode
Power Saving Mode
Off Mode leD Color
White
Flashing White
Off
PRoPeR PosTURe 41
PRoPeR PosTURe
Proper Posture for Using the Monitor
Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye level.
y Take a break for approximately 10 minutes every hour to reduce any fatigue caused by prolonged usage.
y The stand of the touch monitor allows the product to be used in the optimum position.
y Adjust the stand angle from -5° to 15° (34UM65) / -5° to 20° (25UM65 / 25UM64) to obtain the best view of the screen.
You should be looking slightly down at the screen.
Stand Angle
-5° to 15° (34UM65) /
-5° to 20° (25UM65 /
25UM64)
Adjust the position of the screen to minimize reflections.
Place your hands gently on the keyboard, keeping your arms bent at the elbows and extended horizontally in front of you.
Declaration of Conformity
Trade Name: LG
Model: **
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave.
Englewood Cliffs NJ 07632
U.S.A
TEL: 201-266-2534
(** 25UM64, 25UM65, 34UM65)
This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the label attached to the product provides information for technical support.
Model
Serial No.
ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental
Protection Agency (EPA).
As an ENERGY STAR Partner LGE
U. S. A., Inc. has determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
Refer to ENERGY STAR.gov for more information on the ENERGY STAR program.
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
63.5 cm (25") LED IPS
Full HD 2560 x 1080 pixels 21:9
5 ms 300 cd/m² 1000:1
31 W