Ricoh WG-4 GPS Specification
विज्ञापन
विज्ञापन
RICOH IMAGING COMPANY, LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE
S.A.S
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(http://www.ricoh-imaging.fr)
RICOH IMAGING
DEUTSCHLAND GmbH
Am Kaiserkai 1, 20457 Hamburg, GERMANY
(http://www.ricoh-imaging.de)
RICOH IMAGING UK LTD. PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.ricoh-imaging.co.uk)
RICOH IMAGING
AMERICAS CORPORATION
633 17th Street, Suite 2600, Denver, Colorado 80202,
U.S.A.
(http://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA
INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.ricoh-imaging.ca)
RICOH IMAGING CHINA
CO., LTD.
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032, CHINA
(http://www.ricoh-imaging.com.cn) http://www.ricoh-imaging.co.jp/english
1
Digital Camera
RICOH WG-4 GPS
RICOH WG-4
Operating Manual
2
3
4
5
6
7
8
• Specifications and external dimensions are subject to change without notice.
OPWG40101/EN Copyright © RICOH IMAGING COMPMANY, LTD. 2014
FOM 01.02.2014 Printed in Europe
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
Thank you for purchasing this RICOH WG-4 GPS/RICOH WG-4 Digital Camera.
Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
This operating manual applies to RICOH WG-4 GPS/RICOH WG-4.
The illustrations used in this manual are those of RICOH WG-4 GPS.
Regarding copyrights
Images taken with the RICOH WG-4 GPS/RICOH WG-4 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC logo is a trademark of SD-3C, LLC.
• Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
• ArcSoft
®
, and its logo are either the registered trademark or trademark of
ArcSoft Inc. in the United States and/or other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
• Eye-Fi, the Eye-Fi logo, and Eye-Fi connected are trademarks of Eye-Fi, Inc.
• Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and/or other countries.
• AMD, AMD Athlon, and ATI Radeon are trademarks or registered trademarks of Advanced Micro Devices, Inc.
• NVIDIA and GeForce are trademarks and/or registered trademarks of NVIDIA
Corporation in the U.S. and/or other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Memo
• All other trademarks are the property of their respective owners.
Regarding Product Registration
In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on our website.
Thank you for your cooperation.
Refer to “Product Registration on the Internet” (p.198) for more information.
To users of this camera
• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the display, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• There is a possibility that the illustrations and the screen display in this manual are different from the actual ones.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards are referred to as SD Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a
Macintosh.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.
Using Your Camera Safely
We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.
Warning This symbol indicates that ignoring this item could cause serious personal injuries.
Caution
This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.
1
2
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High voltages are present within the camera, and there is a danger of electric shock if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock.
• Wrapping the strap around a neck is dangerous. Take care that small children do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.
• Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time.
• Should the display be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin, in your eyes, or in your mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the Power Adapter and the AC Adapter
Warning
• Always use the power adapter or AC adapter exclusively developed for this camera, with the specified power and voltage. Using a power adapter or AC adapter not exclusive to this camera, or using the exclusive power adapter or
AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue its use and consult your nearest service center. Continued use can cause a fire or electric shock.
• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock.
• If you see a lightning flash or hear thunder during use of the power adapter or
AC adapter, unplug the AC plug and discontinue use. Continued use can cause damage to the product, fire, or electric shock.
• Wipe off the AC plug if it becomes covered with dust. Accumulated dust may cause a fire.
Caution
• Do not place or drop heavy objects on or forcefully bend the USB cord or AC plug cord. Doing so may damage the cord. Should the cord be damaged, consult your nearest service center.
• Do not touch or short-circuit the terminal area of the USB cord or AC plug cord while the cord is plugged in.
• Do not handle the AC plug with wet hands. This can cause an electric shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.
• Do not use the power adapter to charge a battery other than a rechargeable lithium-ion battery D-LI92. This can cause overheating, explosion, or power adapter failure.
• To reduce the risk of hazards, use only a CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
3
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in their mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, it may cause a loss of sight. Flush your eyes with clean water and get medical attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
4
Keep the Camera and its Accessories out of the Reach of Small
Children
Warning
• Be sure to keep the camera and its accessories out of the reach of small children.
1. Injuries may result from the product falling or from unexpected movement.
2. Suffocation may result from wrapping the strap around the neck.
3. Small accessories such as battery or an SD Memory Card may be swallowed. Seek medical attention immediately if an accessory is accidentally swallowed.
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Power Adapter
• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug adapter D-PL135 is designed for exclusive use with the Power
Adapter D-PA135. Do not use it with other devices.
Precautions on Carrying and Using Your Camera
• Hot and humid places should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks, or pressure as this may cause damage, malfunction, or a loss in waterproof performance. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the camera is subjected to substantial vibrations, shocks, or pressure, take your camera to your nearest service center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C (14°F to 104°F).
• The display will become black at high temperatures but will return to normal at normal temperatures.
• The response speed of the display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a malfunction.
5
6
• If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag and take it out when the difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Do not press the display with excessive force. This could cause it to break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.
Storing Your Camera
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place to prevent the camera from becoming moldy during storage.
• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
• Periodic inspections are recommended every one to two years to maintain high performance.
Other Precautions
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.
r appears on the display when the card is write-protected.
Write-protect switch
• Care should be taken when removing the SD Memory Card immediately after using the camera, as the card may be hot.
• Keep the battery cover closed and do not remove the SD Memory Card or turn the camera off while the data is being played back or saved to the card, or the camera is connected to a computer with the USB cable, as this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage the card and render it unusable.
• The data on the SD Memory Card may be lost in the following circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the batteries are removed while the card is being accessed.
• If it is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Be sure to format SD Memory Cards that are unused or have been used
on another camera. Refer to “Formatting the Memory” (p.167).
• When using an SD Memory Card with a slow recording speed, recording may stop while recording a movie even if there is adequate space in the memory, or image capture or playback may take a long time.
• Please note that deleting data, or formatting the SD Memory Cards or the built-in memory does not completely erase the original data. Deleted files can sometimes be recovered using commercially available software. It is user’s responsibility to ensure the privacy of such data.
7
8
Regarding Waterproof, Dustproof, and
Shockproof Design
• This camera is provided with a waterproof/dustproof design complying with JIS waterproof grade 8 and JIS dustproof grade 6 (equivalent to IP68).
• The camera satisfies our drop test (2.0 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method 516.5-Shock testing.
• The camera satisfies our test for the waterproof, dustproof, and shockproof performance, but this does not guarantee it will remain free of trouble or damages.
• Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit.
Precautions Before Using the Camera in the
Water
Check the Following Before Going Near the Water
• Make sure that there are no cracks or scratches on the rubber seal of the battery cover.
Waterproof seal Contact surface
• Make sure that there are no foreign objects (dust, sand, hair, lint or liquid) on the rubber seal or the surface they contact before closing the battery cover. Wipe off any foreign objects with a clean lint-free cloth.
• Close the battery cover properly. Otherwise water may get in and damage the camera.
Be Careful Near the Water
• Avoid opening the battery cover when near the waterside or with wet hands.
When changing the battery or the SD Memory Card, avoid places where the camera is likely to get wet or dirty, and make sure that the camera and your hands are completely dry.
• The camera will sink if dropped in water, so be sure to attach the strap to the camera and wrap it around your wrist when using the camera in or near water.
• To enhance the waterproof performance of the camera, the front of the lens is protected by glass. The glass should be kept clean at all times, as any dirt or water on the glass will affect the quality of pictures taken.
Precautions When Using the Camera in the Water
• Do not use the camera deeper than 14 meters underwater. Do not use the camera underwater for more than 120 minutes consecutively.
• Do not open the battery cover underwater.
• Do not use the camera in hot water or in a hot spring.
• Do not apply excessive force to the camera, for example diving into water with it. Doing so may compromise the waterproof performance of the camera or cause the cover to open.
• Do not leave the camera on the sand at the beach, as this may cause the camera to exceed the upper limit of its operational temperature range, or cause the speaker or microphone to become blocked with sand.
• Avoid subjecting the camera to substantial vibrations, shocks, or pressure as this may cause a loss in waterproof performance. If the camera is subjected to substantial vibrations, shocks or pressure, take your camera to your nearest service center and have it checked.
• Avoid getting sunscreen or sun oil on the camera as it may cause discoloration of the surface. If any oil gets on the camera, wash it off immediately with warm water.
• Sudden and extreme changes in temperature may cause condensation to form in and on the camera. Keep the camera in a bag or case to reduce the difference in temperature.
9
Precautions After Using the Camera in the Water
• Do not open the battery cover if the camera is wet. Wipe off any water with a clean lint-free cloth.
• The inside surface of the cover may get wet when it is opened. Wipe off any water that is on the cover.
• Wiping off the camera while there is sand or dust on it may scratch the surface of the camera. Make sure that the battery cover is firmly closed before washing the camera in tap water. After washing the camera, dry it with a soft cloth.
• Wipe off any dirt or sand on the waterproof seal or the contact surface. The camera’s waterproof performance may be compromised by a loose seal, or cracks or dents on the seal or the contact surface. If there is any such damage, contact your nearest service center.
• If the camera becomes very dirty or after it has been used in the sea, make sure that it is turned off and the battery cover is firmly closed before rinsing it under running tap water or leaving it in a bowl of clean water for a short time (2 or 3 minutes).
10
• Avoid cleaning with agents such as soapy water, mild detergents, or alcohol as this may compromise the waterproof performance of the camera.
• To maintain the waterproof performance of the camera, you are recommended to change the waterproof seal once a year. Contact your nearest service center regarding changing the seal. (A charge will be made.)
• The camera’s accessories are not waterproof.
Contents
Using Your Camera Safely ...................................................................... 1
Care to be Taken During Handling .......................................................... 5
Regarding Waterproof, Dustproof, and Shockproof Design.................... 8
Precautions Before Using the Camera in the Water................................ 8
Precautions When Using the Camera in the Water................................. 9
Precautions After Using the Camera in the Water................................. 10
Composition of the Operating Manual ................................................... 17
Checking the Contents of the Package.................................................... 18
Display in A Mode................................................................................ 21
Display in Q Mode............................................................................... 25
(RICOH WG-4 GPS Only) ........................................................................... 30
Attaching the Carabiner Strap .................................................................. 31
Using the AC Adapter............................................................................ 37
Installing an SD Memory Card .................................................................. 39
Turning the Camera On and Off................................................................ 41
Starting-up in Playback Mode ............................................................... 42
Setting the Display Language ............................................................... 43
Setting the Date and Time..................................................................... 46
Understanding the Button Functions....................................................... 48
Switching Between A Mode and Q Mode.......................................... 52
Setting the Camera Functions .................................................................. 53
Operating the Menus ............................................................................. 53
11
12
Setting the Shooting Mode .................................................................... 67
Using the Face Detection Function ....................................................... 70
Taking Pictures in Basic Mode (Green Mode)....................................... 71
Taking Pictures in Various Shutter Speeds (Shutter Priority Mode)...... 72
Using E Mode ................................................................................... 73
Taking Pictures of Your Pet (Pet Mode) ................................................ 75
Taking Pictures in Digital Microscope Mode.......................................... 75
Taking Pictures at a Set Interval (Interval Shot) .................................... 76
Taking a Series of Pictures (Continuous Shooting/Burst Shooting) ...... 79
Taking Pictures Using a Remote Control Unit (Optional) ...................... 80
Taking Pictures with Automatic Exposure Adjustment
(Auto Bracketing) ............................................................................ 81
Setting the Shooting Functions ................................................................ 82
Using the Rec. Mode Menu Items ......................................................... 82
Selecting the Flash Mode ...................................................................... 83
Selecting the Focus Mode..................................................................... 84
Setting the Image Tone ......................................................................... 88
Selecting the Number of Recorded Pixels............................................. 89
Selecting the Quality Level of Still Pictures ........................................... 90
Adjusting the White Balance ................................................................. 91
Setting the AE Metering ........................................................................ 93
Setting AUTO ISO Range ..................................................................... 95
Setting the Exposure (EV Compensation)............................................. 95
Correcting the Brightness (D-Range Setting) ........................................ 96
Setting the Shake Reduction ................................................................. 97
Switching the Face Detection Function ................................................. 99
Setting the Blink Detection Function ................................................... 101
Setting the Instant Review................................................................... 101
Setting the Green Button Function ...................................................... 102
Setting the Image Sharpness (Sharpness) ......................................... 105
Setting the Saturation/Tone Adjustment.............................................. 105
Setting the Image Contrast (Contrast)................................................. 106
Setting the Date Imprint Function ........................................................ 106
Setting the IQ Enhancer Processing ................................................... 107
Setting the Macro Light ....................................................................... 107
Setting the Electronic Level ................................................................. 108
Using a Conversion Lens .................................................................... 108
Underwater Shooting (Underwater Mode/Underwater Movie Mode)... 110
Recording Movies................................................................................ 112
Recording a Movie Quickly Using the Movie Button............................ 114
Setting the Movie SR (Movie Shake Reduction) Function................... 116
Suppressing Wind Noises during Movie Recording
(Wind Suppression) ...................................................................... 116
Constantly Adjusting Focus While Recording Movies ......................... 117
Setting the Optical Zoom..................................................................... 117
Combining Pictures Taken at a Set Interval into a Movie
(Interval Movie) ............................................................................. 118
Using the Time-Lapse Movie Function ................................................ 120
Using the High Speed Movie Function ................................................ 121
Using the 1cm-Macro Movie Function ................................................. 122
Saving the Settings (Memory)................................................................. 123
Playing Back and Deleting Images 125
Playing Back Still Pictures ................................................................... 125
Playing Back a Movie .......................................................................... 126
Using the Playback Functions ............................................................. 129
Deleting a Single Image ...................................................................... 136
Deleting Selected Images ................................................................... 137
Protecting Images from Deletion (Protect) .......................................... 139
Connecting the Camera to an AV Device............................................... 141
Connecting the Camera to a Video Input Terminal ............................. 141
Connecting the Camera to an HDMI Terminal .................................... 143
13
14
Changing the Image Size (Resize)...................................................... 144
Processing Images to Make Faces Look Smaller ............................... 146
Using the HDR Filter ........................................................................... 149
Using the Ink Rubbing Filter ................................................................ 149
Creating a Collage Image.................................................................... 150
Overlaying Your Original Frame on Still Pictures ................................ 154
Setting the Printing Service (DPOF).................................................... 163
Using the Setting Menu Items ............................................................. 166
Formatting the Memory ....................................................................... 167
Changing the Sound Settings.............................................................. 168
Changing the Date and Time .............................................................. 169
Setting the World Time ........................................................................ 172
Setting the Text Size on the Menu ...................................................... 174
Changing the Display Language ......................................................... 174
Changing the Naming System of the Folder........................................ 175
Changing the Naming System of the File ............................................ 177
Changing the Video Output Format..................................................... 179
Selecting the HDMI Output Format ..................................................... 180
Setting the Eye-Fi Communication ...................................................... 181
Adjusting the Brightness of the Display ............................................... 181
Using the Power Saving Function ....................................................... 182
Using the Auto Power Off Function ..................................................... 182
Setting the Quick Zoom Function ........................................................ 183
Setting the Guide Display .................................................................... 183
Perform Pixel Mapping ........................................................................ 184
Changing the Start-up Screen............................................................. 185
Resetting to Default Settings (Reset) .................................................. 186
Setting the Startup Shortcut ................................................................ 186
Displaying the Clock Display ............................................................... 187
Light up the LED Macro Lights ............................................................ 188
Automatically Rotating Images during Playing Back ........................... 188
Using the Pressure Sensor ................................................................ 189
Connecting to a Computer ...................................................................... 191
Setting the USB Connection Mode...................................................... 191
Connecting the Camera and a Computer............................................ 192
Disconnecting the Camera from the Computer ................................... 193
Using the Provided Software .................................................................. 194
System Requirements ......................................................................... 194
Using MediaImpression on Windows .................................................. 198
Using MediaImpression on Macintosh................................................. 200
Transferring Images Using an Eye-Fi Card............................................ 202
Functions Available for Each Shooting Mode ....................................... 204
GPS Function on the RICOH WG-4 .................................................... 224
Precautions for Using the GPS ........................................................... 225
Preparation for Using the GPS Function ............................................. 227
Recording GPS Information on Captured Images ............................... 228
Recording and Saving a Log ............................................................... 230
Correcting Time Automatically............................................................. 236
Adjusting the Electronic Compass (Calibration) .................................. 237
15
16
In this manual, the method for operating the four-way controller is shown in illustrations, such as in the ones below.
2
2 or
2
4
or 4 4 5 5 or 5
3
3 or
3
The meanings of the symbols used in this Operating Manual are explained below.
1 Indicates the reference page number for an explanation of the related operation.
Indicates information that is useful to know.
Indicates precautions to be taken when operating the camera.
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started ––––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions.
2 Common Operations –––––––––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the buttons and how to use the menus. For more details, refer to the respective chapters below.
3 Taking Pictures –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set the relevant functions.
4 Playing Back and Deleting Images ––––––––––––––––––––––––––––––––
This chapter explains how to view still pictures and movies on the camera or on a TV and how to delete them from the camera.
5 Editing and Printing ––––––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of printing still pictures and how to edit them with the camera.
6 Settings ––––––––––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains how to set camera-related functions.
7 Connecting to a Computer ––––––––––––––––––––––––––––––––––––––
This chapter explains how to connect the camera to a computer, and includes installation instructions and a general overview of the provided software.
8 Appendix –––––––––––––––––––––––––––––––––––––––––––––––––––––
This chapter provides some basic troubleshooting tips and other useful information.
1
2
3
4
5
6
7
8
17
1
Checking the Contents of the Package
1Getting Started
Camera
RICOH WG-4 GPS/
RICOH WG-4
Carabiner strap (*1) Software (CD-ROM)
S-SW145
USB cable
I-USB7 (*2)
Rechargeable lithium-ion battery D-LI92 (*2)
Power adapter D-PA135/
AC plug adapter D-PL135 (*3)
18
Operating Manual
(this manual)
Quick Guide
Macro stand
O-MS2
By visiting www.ricoh-imaging.eu you will be able to download the operating manual, to register your product, to apply for newsletters or to find the latest firmware information.
*1 As listed below, the type of the carabiner strap supplied with the camera varies depending on the model or body color of the camera.
<RICOH WG-4 GPS>
Black : Carabiner strap O-ST144 (Black & White)
Blue : Carabiner strap O-ST145 (Black & Lime Yellow)
<RICOH WG-4>
Silver : Carabiner strap O-ST144 (Black & White)
Lime Yellow : Carabiner strap O-ST145 (Black & Lime Yellow)
*2 Available as optional accessories.
*3 The AC plug adapter is attached to the power adapter.
Names of Parts
Front
Power button/Power lamp (green)
Lens
Shutter release button
Self-timer lamp/
Focus assist light
Flash
Sub-display (*)
Microphones
Remote control receiver
Strap lug
LED Macro Lights
(*) Only available with the RICOH WG-4 GPS.
Back
Release latch
Battery cover
Display
Remote control receiver
Tripod socket
1
Speakers
Battery cover lock
USB/AV terminal
HDMI terminal
Battery lock lever
19
Names of Operating Parts
1
Power button
Shutter release button
W/T/f/y button
Q button
Movie button
Four-way controller
4 button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.48 - 51) for an explanation
of the function of each button.
Macro stand
Attaching the supplied macro stand (O-MS2) reduces camera shake during shooting in (Digital Microscope) or
(1cm-Macro Movie) mode (p.75, p.122). Insert two
clips into the slits in upper and lower sides of the LED Macro Lights part. When attaching and detaching the macro stand, do not hold the clip part.
20
* When using the macro stand, the camera may not be able to focus if the objects have uneven surfaces.
Display Indications
Display in A Mode
The display changes in the following sequence each time you press the 4 button: “Normal Display”, “Histogram + Info”, “Electronic Compass Display”, “Grid
Display”, “No Info”, “LCD Off”.
1
• All the camera buttons function as normal even when the LCD is off. Press the shutter release button to take pictures as normal.
• The display cannot be changed in some shooting modes.
• Only the RICOH WG-4 GPS can display the electronic compass. If you are using the RICOH WG-4, the display changes to the Grid Display by pressing the 4 button at the Histogram + Info display.
Normal Display Histogram + Info
OK
OK
LCD Off
OK
No Info
OK
Electronic Compass Display
N
W
35°45’52”
123°45’52”
NW
N
3776m
0°
NE
SE
04/04/2014
SW
S
08:24 AM
OK
Grid Display
OK
21
1
Normal Display/ Histogram + Info/ Grid Display in Still Picture Capture Mode
1 to 22 and A1 appear when “Normal Display” is selected. B1 to B6 appear at the position of 20 when “Histogram + Info” is selected. Only A1 appears when “Grid
Display” or “No Info” is selected.
11 12 13 14 15 16 17
P
3
4
1
2
9
10
7
8
5
6
DATE
+ 1 . 0
1 / 2 5 0
F 3 . 5
12 M
18
19
A1
B5
B6
21 22 B1 B2 B3 B4
20
22
2 Battery level indicator (p.36)
4 Date Imprint setting (p.106)
6 Shutter speed
7 Aperture
10 Remaining image storage capacity
14 Eye-Fi communication status (p.181)
15 Height/air pressure
16 Digital zoom/Intelligent Zoom icon (p.64)
17 GPS status
(RICOH WG-4 GPS only)
18 GPS log icon
(RICOH WG-4 GPS only)
* 6 and 7 are only displayed when the shutter release button is pressed half-way.
* For 8, M appears if the shutter release button is pressed halfway when
[Shake Reduction] in the [A Rec. Mode] menu is set to [Sensor Shift] or [Dual]. l appears when [Shake Reduction] is set to [Off].
* For 13, when the focus mode is set to = and the Auto Macro function is
activated, q appears on the display (p.84).
* 14 changes depending on [Eye-Fi] setting in the [W Setting] menu.
* 15 changes depending on [Pressure Sensor] settings in [W Setting] menu.
* 17 changes depending on [GPS] settings in [WSetting] menu.
No icon is displayed on the screen when [GPS On/Off] is set to [Off].
* 18 appears when recording the GPS log.
* 20 disappears for two seconds after the camera is turned on.
* 22 changes depending on [D-Range Setting] settings in the [A Rec. Mode] menu.
No icon is displayed on the screen when [Highlight Correction] and [Shadow
Correction] are both set to [Off].
* When the shooting mode is b (Auto Picture) and if you press the shutter release button halfway, the automatically selected shooting mode appears in
A1 even when “No Info” is selected.
* If there are overexposed highlight areas in the image, they will blink red on the display, and if there are underexposed shadow areas, they will blink yellow.
* Some indications may not appear depending on the shooting mode.
1
23
1
Electronic Compass Display in Still Picture Capture Mode
(displayed only on the RICOH WG-4 GPS)
4 5
1
2
N
W
35°45’52”
123°45’52”
NW
N
3776m
NE
0°
6
7
SE
SW
S
3
04/04/2014 08:24 AM
8
1 GPS latitude
2 GPS longitude
3 Current date
4 Height/air pressure
5 GPS status
6 Battery level indicator
7 Lens direction
8 Current time
* 4 changes depending on [Pressure Sensor] settings in [W Setting] menu.
* 5 changes depending on [GPS] settings in [W Setting] menu.
No icon is displayed on the screen when [GPS On/Off] is set to [Off].
* 7 changes depending on the current lens direction. Relationship between the displayed degrees and the lens direction is as follows:
0°
90°
180°
270°
When the lens points to the north
When the lens points to the east
When the lens points to the south
When the lens points to the west
* The normal display appears if you press the shutter release button halfway.
Press the 4 button twice to display the Electronic Compass Display again.
24
Display in Q Mode
The display shows the shooting information of the image in playback mode. The display changes in the following sequence each time you press the 4 button:
• The display cannot be changed by pressing the 4 button while playing back or pausing a movie.
• Only the RICOH WG-4 GPS can display Info 2.
If you are using the RICOH WG-4, the display changes to the normal display by pressing the 4 button at no info display.
Normal Display Info 1
1
OK
1 / 2 5
F 3 . 5
12 M
OK OK
Info 2
3200
700
180 m ɋ
NN
WW
06: 25: 00
45' 52"
139
OK
No Info
25
1
Normal Display/ Info 1 in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. In “Normal
Display”, A1 to A10 are displayed. In “Info 1”, B1 to B8 are displayed as well.
A1
A2
A3
A4
B1
B2
A5
1 / 2 5 0
F 3 . 5
12
M
B5 B6 B7 B8
A6
A7
A8
A9
A10
B3
B4
A2 Playback mode
Q
K
A3 Battery level indicator (p.36)
A5 Four-way controller guide
A6 File number
A9 Eye-Fi communication status (p.181)
A10 Volume icon
B1 Shutter speed
B2 Aperture
* A1 appears only if the Face Detection function worked when the image was shot.
* In “Normal Display”, A3 disappears if no operation is performed for two seconds.
* A5 appears even when “No Info” is selected, but disappears if no operation is performed for two seconds. When no operation is performed for two seconds in
“Normal Display” or “Info 1”, only “Edit” disappears.
* A10 appears only when the volume is being adjusted during playback of movies
* When “Normal Display” is selected, the current date and time appears for two seconds in the B4 to B8 positions.
* If there are overexposed highlight areas in the image, they will blink red on the display, and if there are underexposed shadow areas, they will blink yellow.
26
Info 2 in Playback Mode (displayed only on the RICOH WG-4 GPS)
6 7
1
2
3
4
5
NN
WW
3200
700
180
06: 25: 00
45' 52"
139 m
8
9
10
11
12
13
14
15
16
3
4
5
1
2
6
7
8
Face Detection icon
Playback mode
Battery level indicator
Protect icon
Four-way controller guide
Volume icon
Eye-Fi communication status
File number
9
10
11
14
15
16
Folder number
Memory status
Height
12 Air pressure
13 Lens direction
GPS time
GPS latitude
GPS longitude
* 6 appears only when the volume is being adjusted during playback of movies (p.126).
* “-” appears at 11 and 12 when [Pressure Sensor] is set to [Off] (p.189).
* (height) appears at 11 and (air pressure) at 12 when [Not underwater] is selected for [Camera Location] in [Pressure Sensor].
(water depth) appears at 11 and (underwater pressure) at 12 when
[Underwater] is selected for [Camera Location] in [Pressure Sensor] (p.189).
* 13 displays the lens direction during shooting. “0°” is displayed when the lens
pointed to the north at the time of shooting (p.24).
* 14 is displayed in GPS time (the reference time scale of the GPS system). This may be different from the time you have set on the camera.
1
Guide Display
A guide indicator for each available button or key operation appears as follows on the display during operation.
2
3
4
5
MENU
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
3 button
Zoom button
OK 4 button
SHUTTER Shutter release button
X (green), i Green/i button
(red) Movie button
27
1
Histogram
A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels.
The shape of the histogram before and after shooting tells you whether the brightness and
(Dark) ←Brightness→ (Bright) contrast are correct or not, and
Dark portions Bright portions lets you decide if you need to use EV compensation and take the picture again.
Setting the Exposure (EV Compensation) 1p.95
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is underexposed, the peak is on the left side, and if it is overexposed, the peak is on the right side.
Dark image Correct image Bright image
When the image is underexposed, the part to the left is cut off (dark portions) and when the image is overexposed, the part to the right is cut off (bright portions).
This camera has a function where overexposed areas are indicated as blinking red and underexposed areas as blinking yellow.
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The graph peaks on both sides but sinks in the middle for images with a large difference in contrast and low amounts of mid-level brightness.
28
Electronic Level
This camera is equipped with an electronic level for detecting whether the camera is level.
When [Electronic Level] is set to O (On) in the [A Rec. Mode] menu, the electronic level can be displayed, and you can check how level the camera is
The horizontal bar scale shows a tilt to the left or right (horizontal tilt) and the vertical bar scale shows a tilt upward or downward (vertical tilt).
The number of increments on the scales and the color of bar scale show the camera angle.
1
Display examples:
Horizontally and vertically level (green) Tilted 1° to the right (yellow)
Vertically level (green)
Horizontally level (green)
Tilted 2.5° up (red)
Outside horizontal level display (red)
Outside vertical level display (red)
• If the camera angle cannot be detected, both ends and the center of the bar scale flash red.
• The displayed angle on the electronic level is only a guide. There is no guarantee that the display is accurate.
29
1
Sub-display Indicator
(RICOH WG-4 GPS Only)
When the camera is turned off, information such as the current time and air pressure is displayed on the sub-display on the camera's front side.
1
2
1
2
Current time
Height/air pressure
* 2 changes depending on [Pressure Sensor] settings in [W Setting] menu
• The sub-display’s back light turns on for five seconds when the shutter release button is pressed fully.
• You can change the display items by pressing the zoom button. The items are switched as follows each time the zoom button right is pressed:
Current time → current time + height →current time + air pressure
Press the zoom button left to change the items in the opposite order.
Nothing is displayed at 2 when [Off] is selected for [Pressure Sensor].
• The height that can be displayed on the sub-display is between -300 to
4000 meters when [Not underwater] is selected for [Camera Location].
When the height reaches -300 or 4000 meters, the height value on the subdisplay blinks.
The displayed value is between -15 to 0 meters when [Underwater] is selected (“d” is displayed instead of “-” on the sub-display). When the water depth reaches -15 meters, the water depth value on the sub-display blinks.
30
Attaching the Carabiner Strap
Attach the carabiner strap supplied with the camera.
1
1
Pass the end of the strap through the strap lug on the camera.
2
Fix the end of the strap to the stopper.
Protective rubber ring
The carabiner has rubber rings to prevent damage to the display. These rubber rings cushion the impact when the carabiner hits the display.
Be sure to adjust the positions of the rubber rings as shown in the figure below for the best results before using the carabiner strap.
31
Powering the Camera
1
Installing the Battery
Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera.
Battery lock lever
Battery cover lock
Release latch
32
Battery cover Battery
1
Slide the battery cover lock as indicated by 1, and release the lock.
2
Slide the release latch as indicated by 2, and open the battery
cover towards 3.
3
Using the side of the battery to push the battery lock lever in
the direction of 4, insert the battery with the PENTAX logo pointing toward the lens.
Push the battery in until it is locked in place.
If the battery is incorrectly oriented, malfunction may result.
4
Close the battery cover, and slide the release latch in the
opposite direction indicated by 2.
Make sure that the yellow indicator cannot be seen and the cover is completely closed.
5
Slide the battery cover lock in the opposite direction indicated
by 1.
Make sure that the yellow indicator cannot be seen and the cover is completely locked.
1
Removing the Battery
1
Open the battery cover.
2
Push the battery lock lever towards 4.
The battery will be ejected. Take care not to drop the battery when removing it.
• Do not use excessive force when opening and closing the battery cover because the waterproof seal may peel off. If the seal is not in the correct position, the camera will not be waterproof.
• If the battery cover is not locked securely, water, sand, or dirt may get into the camera.
• This camera uses a rechargeable lithium-ion battery D-LI92. Use of any other type of battery may damage the camera and cause malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented, malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery for 30 minutes using the power adapter and store the battery separately.
Be sure to recharge the battery every 6 to 12 months. Storing the battery below room temperature is ideal. Avoid storing it in high temperatures.
• The date and time may be returned to the default settings if the camera is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the camera is used continuously for a long period of time.
• Allow the camera to dry completely before changing the battery. Avoid changing the battery where the camera is likely to get wet or dirty, and make sure that your hands are dry.
33
1
Charging the Battery
Connect the supplied power adapter (D-PA135) to the camera and charge the battery before using it for the first time or after a long period of non-use, or when the [Battery depleted] message appears.
Power lamp
While charging: Blinks
Charging finished: Turns off
To power outlet
2
Power adapter
USB cable 1
3
1
Make sure that the camera is turned off and open the battery cover.
2
Connect the USB cable to the power adapter.
3
Connect the USB cable to the camera.
4
Plug the power adapter into the power outlet.
The power lamp blinks while charging.
When charging is finished, the power lamp turns off.
The battery cover will not close while charging. Leave the cover open when
7 charging and do not attempt to close it.
5
Unplug the power adapter from the power outlet when charging is finished.
6
Remove the USB cable from the camera.
Close the battery cover.
34
• Do not charge batteries other than the rechargeable lithium-ion battery D-
LI92 using the supplied power adapter (D-PA135). Doing otherwise may cause damage or overheating.
• The battery has reached the end of its service life when it starts to run down soon after being charged. Replace it with a new battery.
• If the camera is connected to the power outlet but the charging indicator fails to light, the battery may be faulty. Replace it with a new battery.
• When charging the battery, you cannot set the camera upright on the table because the USB cable comes out of the bottom of the camera.
• Do not use excessive force when sliding the battery cover open and closed because the waterproof seal may peel off. If the seal is not in the correct position, the camera will not be waterproof.
1
• The time required to fully charge the battery is about 180 minutes (max.).
(The charging time may vary depending on the ambient temperature and charging conditions.) The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F).
• You cannot turn on the camera while it is charging.
• Image Storage Capacity, Movie Recording Time, and Playback Time
(at 23°C (73.4°F) with the display on and the battery fully charged)
Image Storage Capacity
*1
(flash used for 50% of shots)
Movie Recording Time
*2
Playback Time
*2
Approx. 240 pictures Approx. 65 min.
Approx. 200 min.
*1 The image storage capacity shows the approximate number of shots recorded during CIPA-compliant testing (at 23°C (73.4°F) with display on and flash used for 50% of the shots). Actual performance may vary according to operating conditions.
*2 According to the results of in-house testing.
• Battery performance may deteriorate as temperature decreases. When using the camera in cold regions, we recommend carrying a spare battery in your pocket to keep it warm. Battery performance will recover when the temperature returns to normal.
• If [GPS On/Off] of the [GPS] settings is set to [On], the camera performs
GPS positioning regularly even while the camera power is off, which reduces the battery life.
• Using the camera's pressure sensor to determine the current air pressure and height reduces the battery's life.
• Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.
35
1
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera will turn off after this message appears.
36
Using the AC Adapter
Use of the optional AC adapter kit (K-AC117) is recommended if you intend to use the camera for a long time or connect it to a computer.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125
V, 7A, minimum 6 ft. (1.8 m)”
1
1
6
5
DC terminal
4
3
DC coupler
1
Make sure that the camera is turned off and open the battery cover.
2
Remove the Battery.
Refer to p.32 - p.33 on how to open the battery cover and remove the battery.
3
Insert the DC coupler.
Using the side of the DC coupler to push the battery lock lever, insert the DC coupler. Confirm that the DC coupler is locked in place.
The battery cover will not close while the DC coupler is inserted. Leave the cover open when using the AC adapter and do not attempt to close it.
4
Connect the DC terminal of the AC adapter to the DC terminal of the DC coupler.
5
Connect the AC plug cord to the AC adapter.
6
Plug the AC plug cord into the power outlet.
37
1
• Make sure that the camera is turned off before connecting or disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the AC adapter to the camera are inserted securely. Data may be lost if either becomes disconnected while the data is being recorded on the SD Memory
Card or in the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Power Adapter and the AC Adapter” (p.3) before
using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter kit K-
AC117 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright on the table because the cord from the DC coupler comes out of the bottom of the camera.
• Do not use excessive force when sliding the battery cover open and closed because the waterproof seal may peel off. If the seal is not in the correct position, the camera will not be waterproof.
38
Installing an SD Memory Card
This camera uses SD Memory Cards, SDHC Memory Cards or SDXC Memory
Cards. Captured images are saved on the SD Memory Card if a card is inserted in the camera. They are saved in the built-in memory if a card is not inserted
1
• Be sure to use this camera to format (initialize) an SD Memory Card that is unused or has been previously used on other cameras or digital devices.
Refer to “Formatting the Memory” (p.167) for instructions on formatting
cards.
• Make sure that the camera is turned off before inserting or removing the SD
Memory Card.
• Allow the camera to dry completely before changing the SD Memory Card.
Avoid changing the card where the camera is likely to get wet or dirty, and make sure that your hands are dry.
• Do not use excessive force when sliding the battery cover open and closed because the waterproof seal may peel off. If the seal is not in the correct position, the camera will not be waterproof.
• The number of still pictures that can be stored varies depending on the capacity of the SD Memory Card and the selected number of recorded
pixels and quality level (p.220).
• The power lamp blinks while the SD Memory Card is being accessed (data is being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case of a malfunction. Use a computer or other device to back up important data in another location.
39
1
40
Battery cover SD Memory
Card socket
SD Memory Card
1
Slide the battery cover lock as indicated by 1, and release the lock.
2
Slide the release latch as indicated by 2, and open the battery
cover towards 3.
3
Insert an SD Memory Card into the SD Memory Card socket so that the label is facing toward the front of the camera (the side with the lens).
Push the card in all the way. Images may not be recorded correctly if the card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
4
Close the battery cover, and slide the release latch in the
opposite direction indicated by 2.
5
Slide the battery cover lock in the opposite direction indicated
by 1.
Make sure that the lever clicks and the cover is locked.
If the battery cover is not locked securely, water, sand, or dirt may get into the camera.
• The image file size varies depending on the number of recorded pixels and the number of images that can be saved on an SD Memory Card also varies.
• Set the number of recorded pixels for still pictures from the [A Rec. Mode] menu and for movies from the [C Movie] menu.
• For an approximate number of still pictures and amount of time of movies that
can be saved on an SD Memory Card, see “Main Specifications” (p.219).
Turning the Camera On and Off
Power button/Power lamp
1
1
Press the power button.
The camera turns on and both the power lamp and display turn on.
If the [Language/ ] screen or [Date Adjustment] screen appears when you
turn the camera on, follow the procedure on p.43 to set the display language and/
or current date and time.
2
Press the power button again.
The camera turns off and both the power lamp and display turn off.
Checking the SD Memory Card
The SD Memory Card is checked when the camera turns on and the memory status is displayed.
a
+ r
The SD Memory Card is inserted. Images will be saved on the SD Memory Card.
The SD Memory Card is not inserted.
Images will be saved in the built-in memory.
The write-protect switch on the SD Memory
Card is in the LOCK position (p.7). Images
cannot be recorded.
Memory status
41
1
Starting-up in Playback Mode
Use this function when you want to play back images straightaway without taking any picture.
Power button
Q button
1
Press and hold down the Q button.
The display turns on and the camera starts up in playback mode.
• To switch from playback mode to capture mode, press the Q button or press the shutter release button halfway.
• In order to set the camera not to start up in playback mode, set [Playback
Mode] to P (Off) from [Startup Shortcut] in the [W Setting] menu. (p.186)
Playing Back Still Pictures 1p.125
42
Initial Settings
The [Language/ ] screen appears when the camera is turned on for the first
time. Perform the operations in “Setting the Display Language” below to set the
language, and in “Setting the Date and Time” (p.46) to set the current date and
time.
The language, date, and time can be changed later. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
• To change the date and time, follow the steps in “Changing the Date and Time”
1
Setting the Display Language
Four-way controller
4 button
3 button
1
Use the four-way controller (2345) to choose the display language.
2
Press the 4 button.
The [Initial Setting] screen appears in the selected language. If the desired settings for [Hometown] and [DST] (Daylight Saving
Time) appear, proceed to step 9.
Initial Setting
English
Hometown
New York
Settings complete
DST
MENU Cancel
Daylight saving time
43
1
3
Press the four-way controller (3).
The frame moves to [W Hometown].
4
Press the four-way controller (5).
The [W Hometown] screen appears.
5
Use the four-way controller (45) to choose a city.
Initial Setting
English
Hometown
New York
Settings complete
DST
MENU Cancel
Hometown
City
DST
New York
MENU Cancel OK OK
6
Press the four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller (45) to select O(On) or P (Off).
8
Press the 4 button.
The [Initial Setting] screen reappears.
9
Press the four-way controller (3) to select [Settings complete].
10
Press the 4 button.
The [Date Adjustment] screen appears. Next, set the date and time.
44
If you accidentally select the wrong language and go to the next procedure, perform the following operation to set the language back.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller (5).
2
Use the four-way controller (2345) to select the desired
language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the 3 button.
This exits the setting screen and returns the camera to capture mode.
2
Press the 3 button.
The [A Rec. Mode] menu appears.
3
Press the four-way controller (5) twice.
4
Use the four-way controller (32) to select [Language/ ].
5
Press the four-way controller (5).
The [Language/ ] screen appears.
6
Use the four-way controller (2345) to select the desired language.
7
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown], [Date] and [Time], refer to the pages below for instructions.
• To change the Hometown city, follow the steps in “Setting the World Time”
• To change the date and time, follow the steps in “Changing the Date and Time”
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information on the available video output formats and how to change the output format.
• Video output formats available initially: “List of World Time Cities” (1p.218)
• To change the video output format: “Changing the Video Output Format” (1p.179).
1
45
1
Setting the Date and Time
Set the current date and time and the display format.
1
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2
Use the four-way controller (23) to choose the date and time display format.
Choose from [mm/dd/yy], [dd/mm/yy] or
[yy/mm/dd].
Date Adjustment
Date Format
Date
Time mm/dd/yy 24h
01/01/2014
00:00
Settings complete
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
Use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display).
5
Press the four-way controller (5).
The frame returns to [Date Format].
6
Press the four-way controller (3).
The frame moves to [Date].
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller (23) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in step 4, the camera switches between am and pm corresponding to the time.
9
Press the four-way controller (3) to select [Settings complete].
10
Press the 4 button.
This confirms the date and time.
If you press the 4 button in step 10, the camera clock is reset to 0 seconds.
To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 0 seconds.
46
When the [Initial Setting] or [Date Adjustment] screen is displayed, you can cancel the setting operation and switch to capture mode by pressing the
3 button. In this case, the [Initial Setting] screen will appear next time you turn the camera on.
[Language/ ], [Date], [Time], [Hometown] and [DST] can be changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
• To change the date and time, follow the steps in “Changing the Date and Time”
• To change the Hometown city or turn the DST setting on and off, follow the steps
in “Setting the World Time” (1p.172).
1
47
Understanding the Button Functions
A
Mode
2
1 2
3
4
5
6
7
9 8
1 Q button
2 Power button
Turns the camera on and off (p.41).
3 Shutter release button
Focuses the camera on the subject when pressed halfway in Still Picture
Capture Mode (except when the focus mode is set to 3, s, and \) (p.62).
Takes a still picture when pressed down fully (p.62).
Pressing down fully starts and stops movie recording in C (Movie),
(Underwater Movie), (High Speed Movie), c (Time-Lapse Movie), and
(1cm-Macro Movie) modes (p.110, p.112, p.120, p.121, and p.122).
4 W/T button
Changes the captured area (p.64).
5 Movie button
Starts movie recording in Still Picture Capture Mode (p.114).
Displays the shutter speed adjustment screen in b (Shutter Priority) mode.
2Common Operations
48
6 Four-way controller
(2)
(3)
: Changes the drive mode (p.77 - p.81).
: Displays the Capture Mode Palette (p.68).
(4)
(5)
: Changes the flash mode (p.83).
: Changes the focus mode (p.84).
(23)
: Adjusts the focus when the focus mode is set to \ (p.85).
7 Green button
Switches to 9 (Green) mode (p.71).
Calls up the assigned function (p.102).
8 3 button
In Still Picture Capture Mode, [A Rec. Mode] menu appears. In Movie Mode,
[C Movie] menu appears (p.53).
9 4 button
Changes the information on the display (p.21).
2
49
Q
Mode
2
1 2
3
4
5
6
8 7
1 Q button
2 Power button
Turns the camera on and off (p.41).
3 Shutter release button
4 f /y button
In single-image display, pressing f switches to 6-image display. Pressing f
again switches to 12-image display (p.127). Press y to return to the previous
display.
In single-image display, pressing y magnifies the image. Press f to return to
In 12-image display, press f to change to folder or calendar display (p.128).
In folder/calendar display, press y to change to 12-image display (p.128).
Adjusts the volume during playback of movies (p.126).
50
5 Four-way controller
(2)
(3)
: Plays back and pauses a movie (p.126).
: Displays the Playback Mode Palette (p.131).
(45)
Stops a movie during playback (p.126).
: Displays the previous or next image during single-image display
Fast-forwards, fast-reverses, frame forwards, and frame
reverses during movie playback (p.126).
(2345) : Changes the position of the area to be magnified during zoom
Selects an image in 6- or 12-image display, a folder in folder display,
and a date in calendar display (p.127, p.128).
Adjusts the position of a frame or an image when you are using
the Original Frame function (p.156).
6 Green/i button
Switches from single-image display to the Delete screen (p.136).
Switches from 6- or 12-image display to the Select & Delete screen (p.137).
Switches from folder display to the calendar display screen (p.128).
Switches from calendar display to the folder display screen (p.128).
7 3 button
Displays the [W Setting] menu during single-image display (p.53).
Returns to single-image display during Playback Mode Palette display (p.130).
Returns zoom, 6- or 12-image display to single-image display.
Switches from folder/calendar display to 12-image display with the cursor
placed on the most recent image (p.128).
8 4 button
Changes the information on the display (p.25).
Returns zoom, 6- or 12-image display to single-image display (p.128, p.135).
Changes to 12-image display of the selected folder during folder display (p.128).
Changes to single-image display of the selected date during calendar display
2
51
2
Switching Between A Mode and Q Mode
In this manual, the capture mode, such as for taking still pictures and recording movies, is referred to as “A mode” (capture mode) (“Still Picture Capture Mode” refers to the mode for taking still pictures and “Movie Mode” refers to the mode for recording movies). The playback mode, such as for viewing captured images on the display, is referred to as “Q mode” (playback mode). In Q mode, you can perform simple editing operations on the images that are played back.
Follow the procedure below to switch between A mode and Q mode.
1
To Switch from A Mode to Q Mode
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
1
Press the Q button or the shutter release button halfway.
The camera switches to A mode.
Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, still pictures and movies on the
SD Memory Card are displayed. If you want to display still pictures and movies stored in the built-in memory, turn the camera off and remove the SD Memory Card.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
52
Setting the Camera Functions
To change the camera settings, press the 3 button to display the [A Rec.
Mode] menu or [W Setting] menu. Functions for playing back and editing images can be accessed from the Playback Mode Palette.
Operating the Menus
There are three types of menus: [A Rec. Mode], [C Movie] and [W Setting].
Press the 3 button in Still Picture Capture Mode to display the [A Rec.
Mode] menu. Press the 3 button in Movie Mode to display the [C Movie] menu. Press the 3 button in Q mode to display the [W Setting] menu.
Use the four-way controller (45) to move between menus.
2
In capture mode
P
3 8
MENU
Pressed halfway
SHUTTER
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
MENU Exit
1 / 5
Bright
12
M
AWB
In playback mode
MENU
Movie
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
MENU Exit
SHUTTER
Pressed halfway
MENU
Setting
Save as USER
Sound
Date Adjustment
Alarm
World Time
Text Size
MENU Exit
1 / 5
01/01/2014
Standard
53
2
• Available button and key operations appear on the display during menu operation.
• The 3 button function varies depending on the screen. Refer to the guide indications.
MENU
MENU
MENU
Exit Exits the menu and returns to the original screen.
Returns to the previous screen with the current settings.
Cancel Cancels the current selection, exits the menu and returns to the previous screen.
54
Menu List
The following list shows the items that can be set with the menus and provides
descriptions of each item. See the list of default settings in the Appendix “Default
Settings” (p.212) to check whether the settings are saved when the camera is
turned off, and whether the settings return to the default values when the camera is reset.
[A Rec. Mode] Menu
This menu provides the functions related to taking still pictures and recording movies.
Item
Image Tone
Recorded Pixels
Quality Level
White Balance
Focusing
Area
AF
Setting Auto Macro
Focus
Assist
AE Metering
Sensitivity
AUTO ISO Range
EV Compensation
D-Range
Setting
Highlight
Correction
Shadow
Correction
Shake Reduction
Face Detection
Blink Detection
Digital Zoom
Instant Review
Description
For setting the tone of images
For choosing the number of recorded pixels of still pictures
For setting the quality level of still pictures
For adjusting the color balance according to the lighting conditions
When = (Standard), q (Macro), or (1cm
Macro) is selected as the focus mode, you can change the autofocus area (Focusing Area)
For choosing whether or not to use the auto macro function
For setting whether or not to use the focus assist light
For choosing the area of the screen that is metered to determine the exposure
For setting the sensitivity
For setting the adjustment range when the sensitivity is set to AUTO
For adjusting the overall brightness of an image
For setting the bright portion correction function
Page
For setting the dark portion correction function
For setting the Shake Reduction function
For automatically setting the focus and exposure according to faces that are detected and for setting the Self-portrait Assist function
For choosing whether to use the Blink Detection function with the Face Detection function
For choosing whether or not to use the digital zoom
For choosing whether to display Instant Review
2
55
2
Memory
Sharpness
Saturation
(Tone Adjustment)
Contrast
Item
Green Button
Date Imprint
IQ Enhancer*
Macro Light
Electronic Level
Lens Adapter On
Description
For choosing whether to save the set values of the shooting functions or return to the defaults when the camera is turned off
For assigning a function to the Green button in A mode
For choosing sharp or soft outlines
For setting the color saturation. When [Monochrome] is selected, the item changes to [Tone Adjustment]
For setting the image contrast level
For choosing whether to imprint the date and/or time when taking still pictures
For setting whether to apply the IQ Enhancer process to an image
For setting whether or not to turn on the LED Macro
Lights for macro photography
For choosing whether to display the electronic level for detecting the tilt of the camera
For mounting the RICOH Wide Conversion Lens
DW-5 (optional)
*IQ Enhancer = Image Quality Enhancer
Page
56
[A Rec. Mode] Menu 1
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
MENU Exit
1 / 5
Bright
12
M
AWB
[A Rec. Mode] Menu 3
Rec. Mode
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Sharpness
MENU Exit
3 / 5
[A Rec. Mode] Menu 5
Rec. Mode
Lens Adapter On
5 / 5
[A Rec. Mode] Menu 2
Rec. Mode
Sensitivity
Auto ISO Range
EV Compensation
D-Range Setting
Shake Reduction
Face Detection
MENU Exit
Rec. Mode
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
Electronic Level
MENU Exit
2 / 5
AUTO
ISO125-1600
0.0
Sensor Shift
[A Rec. Mode] Menu 4
4 / 5
Off
MENU Exit
• Use the 9 (Green) mode to enjoy easy picture-taking with standard settings, regardless of the settings made from the [A Rec. Mode] menu
• Assigning a frequently used function to the Green button enables you to go
straight to the desired function (p.102).
2
57
2
[C Movie] Menu
Item
Recorded Pixels
Description
For choosing the number of recorded pixels and the frame rate for movies
Page
Movie SR
Wind Suppression
For choosing whether or not to use the Movie Shake
Reduction function
For suppressing wind noises while recording movies p.116
Enable Autofocus
For staying focused on the subject while recording movies
Enable Optical Zoom For using the optical zoom while recording movies
[C Movie] Menu
Movie
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
MENU Exit
[W Setting] Menu
Item
Save as E
Sound
Date Adjustment
Alarm
World Time
Text Size
Language/
Folder Name
File Name
USB Connection
Video Out
Description
For saving current camera settings so they can be retrieved in E mode.
For adjusting the operation volume and playback volume, and setting the start-up sound, shutter sound, key operation sound, and self-timer sound
For adjusting the date and time
For setting the alarm
For setting the Hometown and Destination cities
For setting the text size of the menu
For setting the language in which menus and messages appear
For choosing how names are assigned to folders for storing images
For choosing how names are assigned to images
For setting the method for connecting the camera to a PC by the USB cable (MSC or PTP)
For setting the video output format to an AV device
Page
58
Eye-Fi
Reset
Item
HDMI Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Delete All
Pixel Mapping
Startup
Shortcut
Playback
Mode
LED
Lighting
Clock
Display
Format
Auto Image
Rotation
GPS (*)
GPS
On/Off
GPS
Logging
GPS
Time
Sync
Description
For setting the HDMI output format when connecting to an AV device with an HDMI terminal
For setting whether or not to use Eye-Fi communication
For changing the brightness of the display
For setting the time until the camera enters powersaving mode
For setting the time until the camera turns off automatically
For choosing whether to use the Quick Zoom function
(p.135) when playing back images
For setting whether to display explanations for selected items in Capture Mode Palette and Playback
Mode Palette
For returning settings other than the date and time, language, world time and video out to their defaults
For deleting all the images at once
For correcting defective pixels on the image sensor
For setting whether to start-up the camera in playback mode.
For setting whether to turn the LED Macro Lights on with the camera turned off.
For setting whether to display the clock with the camera turned off.
For formatting the SD Memory Card/built-in memory
For setting whether to rotate images automatically when playing them back
For setting whether to record the GPS information on captured images
For setting the interval and duration of recording logs, and saving and deleting the recorded logs
GPS
Guide
For setting whether to correct the clock in the camera automatically using the received GPS information
Electronic Compass
(*)
For calibrating the electronic compass
Pressure Sensor (*)
For setting whether to display time, time + air pressure, or time + height on the sub-display and main display
(*) RICOH WG-4 GPS only
Page
GPS
Guide
2
59
2
[W Setting] Menu 1
Setting
Save as USER
Sound
Date Adjustment
Alarm
World Time
Text Size
MENU Exit
1 / 5
01/01/2014
Standard
[W Setting] Menu 3
Setting
Eye- Fi
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
MENU Exit
5sec.
3min.
3 / 5
[W Setting] Menu 5
*RICOH WG-4 GPS only
Setting
GPS
Electronic Compass
Pressure Sensor
5 / 5
MENU Exit
[W Setting] Menu 2
Setting
Language
Folder Name
File Name
USB Connection
Video Out
HDMI Out
MENU Exit
English
Date
RIMG
MSC
NTSC
Auto
2 / 5
[W Setting] Menu 4
Setting
Reset
Delete All
Pixel Mapping
Startup Shortcut
Format
Auto Image Rotation
MENU Exit
4 / 5
60
3Taking Pictures
Taking Still Pictures
Taking Pictures
This camera has various functions and shooting modes that support a wide array of scenes and subjects. This section explains shooting with the default settings when shipped.
Power button
Shutter release button
W/T button
3
1
Press the power button.
The camera turns on and is ready to take still pictures. In this manual, this is called Still Picture Capture Mode.
2
Check the subject and shooting information on the display.
The focus frame in the middle of the display indicates the automatic focusing area.
Focus frame
When the camera detects a person’s face, the Face Detection function is activated and
the face detection frame appears (p.70).
Face detection frame
61
3
You can change the captured area by pressing the zoom button (p.64).
Right (T) Enlarges the subject.
Left (W) Widens the area that is captured by the camera.
3
Press the shutter release button halfway.
The camera emits focus assist light in dark shooting situations.
The focus frame (or face detection frame) on the display turns green when the camera
1 / 2 5 0
F 4 . 6 focuses on the subject.
4
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display temporarily (Instant Review: p.64) and is
saved to the SD Memory Card or the built-in memory.
• Press the Green button to switch to 9 (Green) mode and let the camera
set all the shooting functions automatically (p.71).
• f is displayed when the shutter release button is pressed halfway if there is a risk of camera shake.
62
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first position. This locks the focus setting and exposure. The green focus frame lights on the display when the shutter release button is pressed halfway and the subject is in focus. If the subject is out of focus, the frame turns white.
Press fully
This refers to pressing the shutter release button all the way down to the fully depressed position. This takes a picture.
3
Not pressed Pressed halfway
(first position)
Pressed fully
(second position)
Poor focusing conditions
The camera may not be able to focus under the following conditions. In these cases, lock the focus on an object the same distance away as the subject (by pressing and holding the shutter release button halfway), then aim the camera at your subject and press the shutter release button fully.
• Objects that lack contrast such as a blue sky or white wall
• Dark places or objects, or conditions that prevent light being reflected back
• Intricate patterns
• Fast moving objects
• When both an object in the foreground and an object in the background exist in the captured area
• Strongly reflected light or strong backlighting (bright background)
63
3
Instant Review and Blink Detection
The image appears on the display temporarily (Instant Review) immediately after it is captured. If the camera detects that the subject’s eyes are closed while Face
Detection (p.99) is activated, the message [Closed eyes have been detected]
appears for 3 seconds (Blink Detection).
• When the Face Detection function does not work, Blink Detection also does not function. Even if the subjects’ faces are recognized, Blink Detection may not function depending on the condition of the recognized faces.
• You can also disable the Blink Detection function (p.101).
Using the Zoom
You can use the zoom to change the captured area.
W/T button
Four-way controller
4 button
3 button
1
Press the W/T button in A mode.
W Wide (left)
Widens the area that is captured by the camera.
T Tele (right)
Enlarges the subject.
Zoom ratio
Zoom bar
If you continue to press T, the camera automatically switches from optical zoom to
Intelligent Zoom and stops at the point where the zoom switches to digital zoom.
Once the button is released and pressed again, the camera switches to digital zoom.
If the digital zoom is set to off in the menu, the optical zoom and the Intelligent
Zoom ranges are available for use. The zoom ratio of the Intelligent Zoom varies depending on the number of recorded pixels.
64
The zoom bar is displayed as follows.
Zoom in with high image quality.
Zoom in with some degree of image deterioration.
Optical zoom range
*1
Intelligent
Zoom range *2
Digital zoom range
*1 You can zoom in to a maximum of 4× optically.
*2 The Intelligent Zoom range varies depending on the number of recorded pixels. See the following table.
Recorded pixels and the maximum zoom ratio
Recorded Pixels
Intelligent Zoom
(The zoom ratio includes the 4× optical zoom.)
/ /
Not Available (4× optical zoom only)
6/ f/ h h
V (*)
Approx. 6×
Approx. 7.1×
Approx. 9×
Approx. 9.6×
Not Available (4× optical zoom only) l Approx. 18× m Approx. 28.8× (same as digital zoom)
(*) V can be set only when (Report) mode is set.
Digital zoom
Equivalent to approx. 28.8×
Equivalent to approx. 28.8×
• We recommend you use a tripod to prevent camera shake when taking pictures at high zoom ratios.
• Pictures taken in the digital zoom range appear grainier than pictures taken in the optical zoom range.
• For details on the available functions, refer to “Functions Available for Each
• The image magnified using Intelligent Zoom may appear rough on the display. This does not affect the quality of the recorded image.
• Intelligent Zoom is available regardless of whether the digital zoom is turned on or off.
3
65
3
To Set the Digital Zoom
The digital zoom is set to O (On) in the default settings. To take pictures using only the optical zoom and Intelligent Zoom, set the digital zoom to P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Digital Zoom].
3
Use the four-way controller (45)
to switch between O (On) or P
Rec. Mode 3 / 5
(Off).
O (On)
P (Off)
Uses the digital zoom
Uses only the optical zoom
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Sharpness and Intelligent Zoom
MENU Exit
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
Saving the Digital Zoom setting 1p.123
66
Setting the Shooting Mode
This camera has a variety of shooting modes that let you take pictures or record movies in different situations simply by choosing the right mode for the particular situation from the Capture Mode Palette.
Four-way controller
4 button
3
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to choose a shooting
Landscape mode.
The guide of the selected shooting mode is displayed in the lower part of the display.
For capturing landscape views. Enhances colors of sky and foliage
MENU Cancel
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
1 / 2
OK OK
67
The following modes can be selected from the Capture Mode Palette.
Item Description
The camera automatically selects the appropriate shooting mode from the following fifteen modes
Page
3 b Auto Picture
Standard
Landscape
Sport
Portrait×
Blue Sky
Night Scene Night Scene
Portrait
Flower
Candlelight
Portrait×
Backlight
Portrait
Blue Sky
Sunset
⎯
R Program
Portrait×
Sunset
Group
Photograph
Text
* When the camera detects the pet’s face, the shutter is automatically released.
Used for basic shooting. The shutter speed and aperture are set automatically by the camera during shooting. However, you can select and set other functions as desired, such as the flash mode and the number of recorded pixels
⎯ b
E
C
Shutter Priority
USER
HDR
Handheld Night
Snap
Movie
Underwater
Captures images with your desired shutter speed
Captures images with the settings saved as E
Combines 3 images into a single image delivering a wider dynamic range image
Minimizes camera shake for shooting at night or other low light settings
⎯
⎯
For recording movies. Sound is recorded at the same time
For capturing images underwater
Underwater Movie Use this mode for taking underwater movies
a Landscape
For capturing landscape views. Enhances colors of sky and foliage
⎯
68
b c
Item
Flower
Portrait
Interval Shot
Description
For images of flowers. The outline of the flower is softened
For capturing portraits. Reproduces a healthy and bright skin tone
Shoots a series of images at a specified interval of time
Interval Movie
Shoots a series of images at a specified interval, and saves them as a movie
High Speed Movie Captures frames for slow motion playback c Time-Lapse Movie Captures frames for fast motion playback
1cm-Macro Movie For capturing movie clips at close distances c
Q
R
Digital SR
Surf & Snow
Kids
Higher sensitivity reduces blur
For bright images such as sand or snow.
Accurately meters for bright scenes
For capturing moving kids. Reproduces a healthy and bright skin tone e Pet For capturing images of moving pets
\
A
B
S
Sport
Night Scene
Night Scene
Portrait
Fireworks
For a fast moving subject. Tracks the subject until the picture is taken
For night time images. Use of a tripod or other support is suggested
For images of people at night. Use of a tripod or other support is advised
For capturing fireworks. Use of a tripod or other support is suggested
K Food
Report
For images of food and prepared dishes.
Enhances saturation and contrast
For capturing image with fixed 1280×960 pixels for reports
* 9 (Green) (p.71) mode is available in addition to the ones noted above.
Page
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
3
69
3
• In shooting modes other than R (Program), b (Shutter Priority), A (Night
Scene), C (Movie), (Digital Microscope), (Handheld Night Snap),
(Interval Shot), (Interval Movie), (High Speed Movie), c (Time-
Lapse Movie), (1cm-Macro Movie), and c (Digital SR), Saturation,
Contrast, Sharpness, White Balance, etc. are automatically set to the optimal settings for the selected mode.
• Some functions may not be available or may not function fully depending
on the selected shooting mode. For details, refer to “Functions Available for
• You can turn off the shooting mode guide to be displayed on the Capture
• The shutter speed tends to be slower when taking pictures of dark scenes.
To prevent camera shake, set [Shake Reduction] to [Sensor Shift] or [Dual]
(p.97), or put the camera on a tripod and use the self-timer (p.77) or a
Using the Face Detection Function
When the camera detects a person’s face in the image, the Face Detection function displays a yellow face detection frame around the face on the display screen, sets the focus (Face Detection AF) and compensates the exposure (Face Detection
AE).
If the subject in the face detection frame moves, the frame also moves and changes its size as it tracks the face.
Face detection frame
The Face Detection function can recognize up to 32 people’s faces. If it recognizes multiple faces, the camera displays a yellow frame over the main face and white frames over the other faces. Up to a total of 31 frames, including both the main and white frames can be displayed on the screen.
When the multiple faces are detected
Main frame White frame
Switching the Face Detection Function 1p.99
70
Taking Pictures in Basic Mode (Green Mode)
In 9 (Green) mode, you can enjoy easy picture-taking with standard settings, regardless of the settings made from the [A Rec. Mode] menu.
The 9 mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Shake Reduction
Recorded Pixels
, (Auto)
9 (Standard)
= (Standard)
Information Display Normal display
Sensor Shift
(4608×2592)
Sensitivity AUTO (125-1600)
EV Compensation ±0.0
Blink Detection
Digital Zoom
Instant Review
Sharpness
O (On)
O (On)
O (On)
G (Normal)
White Balance
Focusing Area
Auto Macro
Focus Assist
AE Metering
F (Auto)
J (Multiple)
O (On)
O (On)
L (Multi-segment metering)
Image Tone Bright
Quality Level D (Better)
Highlight Correction Auto
Shadow Correction Auto
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
Face Detection
Electronic Level
Lens Adapter On
G
G
Off
P
P
(Off)
(Off)
(Normal)
(Normal)
O (On)
P (Off)
I (Face
Detection On)
1
Press the Green button in A mode.
The camera switches to 9 mode.
Press the Green button again to return to the mode before 9 mode was selected.
When the camera detects a person’s face, the Face Detection function is activated and
the face detection frame appears (p.70).
2
\
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject.
3
Press the shutter release button fully.
The picture is taken.
3
71
• Assign the9 mode to the [Green Button] in the [A Rec. Mode] menu to
use the 9 mode (p.102). (By default, the 9 mode is assigned.)
• When the 3 button is pressed in 9 mode, the [W Setting] menu appears. The [A Rec. Mode] menu cannot be displayed.
• When the camera is turned off in 9 mode, it turns on in 9 mode next time the power button is pressed.
3
Taking Pictures in Various Shutter Speeds
(Shutter Priority Mode)
Use Shutter Priority mode to set the desired speed for expressing subject movement.
1
Use the four-way controller (2345) to select b (Shutter
Priority) mode from the Capture Mode Palette.
2
Press the 4 button.
The b mode is selected.
3
Press the Movie button.
The shutter speed adjustment screen appears.
4
Use the four-way controller (23) to change the shutter speed.
1 / 2 5 0
F 3 .
72
5
OK
AUTO
F 3 . 5
1 / 2 5 0
Press the 4 button.
The shutter speed is set and the camera returns to capture mode.
• The sensitivity is fixed to AUTO.
• AUTO ISO Range is fixed at 125-1600, and it cannot be changed.
• Flash modes C (Auto) and D (Auto + Red-eye) are not available.
When the shutter speed is set to a speed slower than 1/4 second, a process to reduce image roughness and unevenness (Noise Reduction) is performed.
Using E Mode
To Save the Settings in E Mode
By saving the current camera settings, you can easily retrieve them by setting the shooting mode to E.
The following settings can be saved:
• Shooting modes e (default setting)/b
• EV Compensation
• Shutter speed (only in b mode)
• [A Rec. Mode] menu settings
• Flash Mode
• Drive Mode
• Focus Mode
• MF Position
• Exposure compensation range of Auto Bracketing
• AF Point
• Sensitivity
• Type of information display
1
Set the shooting mode to e or b. (p.67)
You can save settings in E mode only when the shooting mode is set to e or b.
2
Set the functions to be saved.
3
Use the four-way controller (23) to select [Save as E] in
the [RSetting] menu, and press the four-way controller (5).
The [Save as E] screen appears.
4
Press the four-way controller (2) to select [Save].
Save as USER
Saves current shooting settings in USER mode
3
Save
Cancel
OK OK
73
5
Press the 4 button.
The save process starts.
When the save process is completed, the camera returns to capture mode.
3
To Take Pictures in E Mode
1
Use the four-way controller
(2345) to select E from the
Capture Mode Palette.
USER 1 / 2
Captures images with the settings saved as USER
MENU Cancel
2
Press the 4 button.
The saved settings are retrieved.
Change the settings already in the E mode if necessary.
3
Take a picture.
OK OK
The settings changed in E mode are valid only when the shooting mode is set to E. Changing the capture mode or turning off the power returns the camera to the settings saved with [Save as E]. To change the settings of
E mode, perform the operations in [Save as E] again.
74
Taking Pictures of Your Pet (Pet Mode)
In e (Pet) mode, the camera automatically releases the shutter when the pet is detected.
1
Use the four-way controller (2345) to select e (Pet) from the Capture Mode Palette.
2
Press the 4 button.
The e mode is selected and the camera returns to capture mode.
When the camera detects the pet’s face, the shutter is automatically released.
Taking Pictures in Digital Microscope Mode
In (Digital Microscope) mode, you can take pictures of objects as close as 1 cm, also because the LED Macro Lights around the lens are always lighted, you can take minute pictures of text, the veins of leaves, or specimens of tiny insects etc.
The illumination of the LED Macro Lights may be uneven or insufficient depending on the shooting conditions.
1
Use the four-way controller (2345) to select (Digital
Microscope) from the Capture Mode Palette.
2
Press the 4 button.
The mode is selected and the camera returns to capture mode.
3
Press the W/T button.
If you press T, the camera enlarges the subject.
You can enlarge the subject up to 9.6 times(*).
(*)Intelligent Zoom is included. Up to 4 times for optical zoom.
W Wide (left)
Widens the area that is captured by the camera.
T Tele (right)
Enlarges the subject.
Attaching the supplied macro stand (O-MS2) reduces camera shake during
3
75
3
Taking Pictures at a Set Interval (Interval Shot)
In this mode, a set number of pictures can be taken automatically at a set interval from a set time.
Interval
Number of Shots
10 sec. – 99 min.
2 shots – number of recordable images
Start Delay 0 min. – 24 hours
You can set the shooting interval in increments of one second from ten seconds to 4 minutes, and in 1 minute increments from 4 to 99 minutes. You cannot set the camera to take interval shots at less than ten seconds.
You can set this up to 1000 shots. However, it cannot exceed the number of recordable images.
You can set this in 1-minute increments. If the start time is set to 0 minutes, the first picture is taken as soon as the shutter release button is pressed.
1
Use the four-way controller (2345) to select (Interval
Shot) from the Capture Mode Palette.
2
Press the 4 button.
The current interval shot settings appear for approximately 1 minute. To take pictures with the current settings, go to step 10.
3
Press the 4 button while the current settings are displayed.
The [Interval Shot] setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
Interval Shot
1 Press the four-way controller (5).
Interval 0 min.
10 sec.
2 Use the four-way controller (23)
Number of Shots 2 to set the minutes, then press the
Start Delay 0 hr.
0 min.
four-way controller (5).
3 Use the four-way controller (23) to set the seconds, then press the
four-way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
6
Set the number of shots.
1 Press the four-way controller (5).
MENU
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The frame returns to [Number of Shots].
76
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The [Interval Shot] settings are saved and the camera returns to capture mode.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval shooting starts.
The LCD turns off between shots (during standby). Press the power button during standby to display the remaining number of shots and shooting interval on the screen.
The [Stop interval shooting?] message is displayed when the power button and then the 3 button are pressed during standby. Pressing the 4 button cancels interval shooting.
• Even if an alarm is set, it will not ring during interval shooting.
• Interval shooting stops if the SD Memory Card is removed or inserted during standby.
3
Using the Self-timer
In Self-timer mode, a picture is taken ten seconds or two seconds after the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture with the self-timer.
g
Z
Use this mode when you want to be included in a group picture. The picture is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two seconds after the shutter release button is pressed.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
77
3
2
Use the four-way controller (45) to select g and press the
four-way controller (3).
3
Use the four-way controller (45)
to select g or Z and press the
4 button.
The camera is ready to take a picture using Drive Mode
Self-timer the self-timer.
When the camera detects a person’s face, the Face Detection function is activated and the face detection frame appears
4
Press the shutter release button to take a picture.
The countdown starts and the remaining seconds are displayed on the screen.
If you select g
The self-timer lamp and all of the LED Macro Lights turn on.
From 5 seconds before shooting, the LED Macro Lights turn off in order from the top right.
From 3 seconds before shooting, the self-timer lamp blinks.
If you select Z
The self-timer lamp and the LED Macro Lights blink.
The picture is taken after a countdown of either ten seconds or two seconds.
Focusing may be compromised if you move the camera while the self-timer lamp is blinking when taking still pictures.
• In C (Movie), (Underwater Movie), (High Speed Movie), c (Time-
Lapse Movie), and (1cm-Macro Movie) modes, recording will start after ten seconds or two seconds.
• Press the shutter release button halfway while the self-timer is engaged to stop the countdown and press fully to restart the countdown.
• Z cannot be selected while the 9 (Green) mode settings remain at default. Select Z in another shooting mode and then switch the shooting mode to 9.
• The self-timer lamp and LED Macro Lights do not turn on or blink in e (Pet) mode.
• In the following situations, the LED Macro Lights remain turned on regardless of the countdown.
- In (Digital Microscope) or (1cm-Macro Movie) mode
- When [Macro Light] in the [A Rec. Mode] menu is set to O (On)
• g/Z cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.204) for details.
78
Taking a Series of Pictures (Continuous
Shooting/Burst Shooting)
Pictures are taken continuously as long as the shutter release button is pressed.
j c
Continuous
Shooting
Burst
Shooting
Each time a picture is taken, the image is saved in the memory before the next image is taken. The higher the image quality, the longer the interval between shots.
The number of recorded pixels is fixed at f/ and the interval between shots is shorter than “Continuous Shooting”.
* The number of images that can be shot continuously and the interval between shots depend on shooting situations.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select j or c and press
the 4 button.
The camera is ready for taking pictures continuously.
3
Press the shutter release button to take a picture.
Pictures are taken continuously as long as you keep the shutter release button pressed.
j
/c cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.204) for details.
3
• With j, you can continue shooting until the capacity of the SD Memory
Card or built-in memory becomes full.
• The shooting interval of j varies according to the [Recorded Pixels] and
[Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.99), it works only when
taking the first shot.
• The Blink Detection function works only for the last shot.
in the shooting mode is set to (Report), the number of recorded pixels is fixed to V.
79
Taking Pictures Using a Remote Control Unit
(Optional)
You can use a remote control unit (optional) to take pictures while you are away from the camera.
i h
The shutter will be released after about three seconds when the shutter release button on the remote control unit is pressed.
The shutter will be released immediately when the shutter release button on the remote control unit is pressed.
3 1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press the
four-way controller (3).
3
Use the four-way controller (45)
to select i or h and press the
4 button.
The self-timer lamp begins to blink slowly Drive Mode
Remote Control and the camera is ready to take a picture by remote control.
When the camera detects a person’s face, the Face Detection function is activated
and the face detection frame appears (p.70).
4
Point a remote control unit at the remote control receiver and press the shutter release button on the remote control unit.
The focus frame turns green when the subject is in focus and the camera takes a picture at the following timing.
When i is selected:
The self-timer lamp and the LED Macro Lights blink quickly and the camera takes a picture after about three seconds.
When h is selected:
The camera takes a picture immediately.
80
• A remote control signal can be received from either receivers on the front and the back of the camera.
• The operating range is approx. 4 m from the front of the camera and approx. 2 m from the back of it.
• In C (Movie), (Underwater Movie), (High Speed Movie), c (Time-
Lapse Movie), and (1cm-Macro Movie) modes, pressing the shutter release button again stops the recording.
• The camera takes a picture even if the focus is not achieved.
• If the shutter release button on the camera is pressed halfway during the countdown, the countdown stops. If the shutter release button on the remote control unit is pressed again, the camera starts the countdown again.
• i/h cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.204) for details.
• The self-timer lamp and LED Macro Lights do not turn on or blink in e (Pet) mode.
3
Taking Pictures with Automatic Exposure
Adjustment (Auto Bracketing)
Press the shutter release button once to automatically adjust the exposure and take three pictures in succession. After taking the pictures, you can select the best shot from them.
The shooting order is as follows: the proper exposure → –1.0 EV → +1.0 EV.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select a (Auto
Bracketing) and press the 4 button.
The camera is now ready to take pictures with Auto Bracketing.
• When the Instant Review is set to O (On) (p.101), the pictures taken are
shown in Instant Review after shooting (p.64).
• a cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.204) for details.
81
Setting the Shooting Functions
3
Using the Rec. Mode Menu Items
Settings for shooting are mostly set from the [A Rec. Mode] menu. Refer to
1 explanations for each function on how to make these settings.
Press the 3 button in Still Picture Capture Mode.
The [A Rec. Mode] menu appears.
Pressing the 3 button in Movie Mode displays the [C Movie] menu.
2
Use the four-way controller (2345) to select an item and set it up.
To Save the Setting and Start Taking Pictures
3
After setting, press the 3 button.
The camera returns to capture mode.
The setting is saved and the camera returns to the previous screen.
When the [W Setting] menu is displayed from Q mode, you can switch to
A mode by pressing the Q button.
To Save the Setting and Start Playback of Images
3
Press the Q button.
When the [A Rec. Mode], [C Movie] or [W Setting] menu is displayed from
A mode, the setting is saved and the camera returns to playback mode.
To Cancel the Changes and Continue with Menu Operations
3
Press the 3 button.
The changes are canceled and you can select a menu.
82
The 3 button function varies depending on the screen. Refer to the guide indications.
MENU Exit Exits the menu and returns to the original screen.
MENU
MENU
Returns to the previous screen with the current settings.
Cancel Cancels the current selection, exits the menu and returns to the previous screen.
Selecting the Flash Mode
, a b c Auto + Red-eye d
Auto
Flash Off
Flash On
Flash On +
Red-eye
The flash discharges automatically depending on the light conditions.
The flash does not discharge, regardless of the brightness.
Use this mode to take pictures where flash photography is prohibited.
The flash discharges for each shot regardless of the brightness.
This mode reduces the red-eye phenomenon caused by the light from the flash being reflected in the subject’s eyes. The flash discharges automatically.
This mode reduces the red-eye phenomenon caused by the light from the flash being reflected in the subject’s eyes. The flash discharges regardless of the light conditions.
3
• The available modes differ depending on the selected shooting mode,
focus mode or drive mode. Refer to “Functions Available for Each Shooting
• If you use the Face Detection function when , is selected, the flash mode is automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
Using the flash when capturing images at a close distance may cause irregularities in the image due to the light distribution.
1
Press the four-way controller (4)
in A mode.
The [Flash Mode] screen appears.
The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (23).
Flash Mode
Auto
83
3
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in the resulting picture. This phenomenon occurs when the light from the flash is reflected in the subject’s eyes. It can be reduced by increasing the illumination in the area around the subject and/or decreasing the subject distance and adjusting the lens to wider angle setting. Setting the flash mode to c (Auto + Red-eye) or d (Flash On +
Red-eye) is also an effective way of reducing red eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected by
the Red-eye Edit function (p.153).
Saving the Flash Mode setting 1p.123
Selecting the Focus Mode
= q
3 s
\
Standard
Macro
1cm Macro
Pan Focus
Infinity
This mode is used when the distance to the subject is from 40 cm to ∞. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from 10 cm to 50 cm. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from 1 cm to 30 cm. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.
This mode is used when you ask someone to take pictures for you, or when taking pictures of the scenery through the window of a car or train. The entire picture, from the front to the back, is focused.
This mode is used for taking distant objects. The flash is set to a (Flash Off).
Manual Focus This mode lets you adjust the focus manually.
84
1
Press the four-way controller (5)
in A mode.
The [Focus Mode] screen appears.
The focus mode changes each time the button is pressed. You can also change the setting using the four-way controller (23).
Focus Mode
Standard
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
• The available modes differ depending on the selected shooting mode.
Refer to “Functions Available for Each Shooting Mode” (p.204) for details.
• The noise from focusing is recorded when a focus mode other than 3 or s is selected in C (Movie), (Underwater Movie), (High Speed
Movie), c (Time-Lapse Movie), and (1cm-Macro Movie) modes.
• When [Auto Macro] is on and shooting with q selected, if the subject is further than 50 cm away, the camera automatically focuses to ∞ (Infinity).
Saving the Focus Mode setting 1p.123
3
To Set the Manual Focus
The procedure for setting the focus manually (\) is described here.
1
Press the four-way controller (5) in A mode.
The [Focus Mode] screen appears.
2
Use the four-way controller (5) to select \.
3
Press the 4 button.
The central portion of the image is magnified to full screen on the display.
4
Press the four-way controller
(23).
The \ indicator appears on the display to
1.5
m
0.8
indicate the approximate distance to the subject. Use the four-way controller (23) to adjust the focus using the indicator as a guide.
2 for distant focus
0.4
\ indicator
3 for closer focus
85
3
5
Press the 4 button.
The focus is locked and the camera returns to capture mode.
After the focus is locked, you can press the four-way controller (5) again to display the \ indicator and readjust the focus.
The shooting mode and drive mode cannot be changed while the \ indicator is displayed.
To switch from \ to another focus mode, press the four-way controller (5) while the \ indicator is displayed.
Changing the Autofocus Area
You can change the autofocus area (Focusing Area).
J Multiple
K Spot
W Automatic Tracking
Uses the normal autofocus area.
Makes the focusing area smaller.
Tracks a moving subject and keeps it in focus.
1
Use the four-way controller (23) to select [AF Setting] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [AF Setting] screen appears.
3
Use the four-way controller (23) to select [Focusing Area].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to change the autofocus area.
6
Press the 4 button.
The setting is saved.
The available modes differ depending on the selected shooting mode. Refer
to “Functions Available for Each Shooting Mode” (p.204) for details.
86
Setting the Auto Macro
When [Auto Macro] is set to O(On), the focus is adjusted to the macro range
(distance to the subject is 10 cm to 50 cm) as necessary, even if the focus mode is set to = (Standard).
When it is off and the focus mode is set to = (Standard), the AF operates only in the standard range, and focusing is not done in the macro range.
When the focus mode is set to q (Macro) or (1cm Macro), the focus is only adjusted in the respective macro ranges and is not done in the standard range.
1
Use the four-way controller (23) to select [AF Setting] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [AF Setting] screen appears.
3
Use the four-way controller (23) to select [Auto Macro].
4
Use the four-way controller (45) to select O (On)/P (Off).
The setting is saved.
3
Setting the = Assist Light (Focus Assist)
The camera automatically emits the focus assist light in dark shooting situations.
You can set the light to on or off.
1
Use the four-way controller (23) to select [AF Setting] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [AF Setting] screen appears.
3
Use the four-way controller (23) to select [Focus Assist].
4
Use the four-way controller (45) to select O (On)/P (Off).
The setting is saved.
Looking at the light directly will not create a safety hazard. However, do not look into the emitter from a very short distance since you may feel dazzled.
The camera does not emit the focus assist light depending on the selected
shooting mode or focus mode. Refer to “Functions Available for Each
Shooting Mode” (p.204) for details.
87
3
Setting the Image Tone
For setting the tone of images.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Use the four-way controller (23) to select [Image Tone] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a finishing tone.
4
Press the 4 button.
The setting is saved.
When [Monochrome] is selected, [Tone Adjustment] appears in the [A Rec.
Mode] menu for setting the tone of monochrome images instead of
[Saturation].
88
Selecting the Number of Recorded Pixels
You can choose the number of recorded pixels for still pictures.
The larger the number of recorded pixels, the clearer the details will appear when you print your picture. As the quality of the printed picture also depends on the image quality, exposure control, resolution of the printer, and other factors, you do not need to select more than the required number of recorded pixels. h is adequate for making postcard-size prints. The more pixels there are, the larger the picture and the bigger the file size.
Refer to the following table for the appropriate setting according to expected usage.
Recorded Pixels
4608×3456
3456×3456
4608×2592
6 3072×2304
3072×1728 f 2592×1944
Expected Usage
For printing high quality photos or A4-size pictures or larger, or editing images on a computer.
2592×1464 h 2048×1536 For making postcard-size prints.
h 1920×1080
V 1280×960 l 1024×768 m 640×480 For posting on a website or attaching to e-mails.
• The default setting is .
• V can be set only when (Report) mode is set. V does not appear in the
[Recorded Pixels] options.
If you select /6/f/h/l/m, the aspect ratio of the screen is 4:3. The monitor display for image capture and playback is as shown on the right.
P
3
89
3
1
Use the four-way controller (23) to select [Recorded Pixels]
in the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the number of recorded pixels.
4
Press the 4 button.
The setting is saved.
The selectable number of recorded pixels differs depending on the shooting
mode. Refer to “Functions Available for Each Shooting Mode” (p.204) for
details.
90
Selecting the Quality Level of Still Pictures
Select the quality level (data compression ratio) for still images according to how the images will be used.
The more stars (E), the higher the quality of the image, but the file size increases.
The selected number of recorded pixels also affects the size of the image file
Quality Level
C Best
D
E
Better
Good
Lowest compression ratio. Suitable for photo prints.
Standard compression ratio. Suitable for viewing the image on a computer screen. (default setting)
Highest compression ratio. Suitable for attaching to e-mails or creating websites.
1
Use the four-way controller (23) to select [Quality Level] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the quality level.
The number of recordable still pictures is displayed at the top of the screen when you select a quality level.
4
Press the 4 button.
The setting is saved.
Adjusting the White Balance
You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting.
F Auto
G Daylight l Shade
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Use this mode when taking pictures outside in the shade.
I
J
J
J
D
N
W
Tungsten Light
Use this mode when taking pictures under tungsten lamps or electric lights other than fluorescent.
Daylight Colors
Fluorescent
Daylight White
Fluorescent
White Light
Fluorescent
Use this mode when taking pictures under fluorescent light.
K Manual Use this mode when adjusting the white balance manually.
3
• Set another white balance if you are not satisfied with the color balance of pictures taken with the white balance set to F.
• The white balance setting may not be changed depending on the selected
shooting mode. Refer to “Functions Available for Each Shooting Mode”
1
Use the four-way controller (23) to select [White Balance] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
The [White Balance] screen appears.
3
Use the four-way controller (23) to change the setting.
White Balance
You can check the results of available white balance settings on the preview image each time you press the four-way controller.
D
91
4
Press the 4 button.
The setting is saved.
Refer to the following instructions if you want to set the white balance by selecting the fluorescent light type, or adjust it manually.
If you change the [White Balance] setting frequently, you can save time by
assigning the Fn Setting to the Green button (p.102).
Saving the White Balance setting 1p.123
3
Selecting the Fluorescent Light Type
Select the proper fluorescent light type from JD (Daylight Colors Fluorescent),
J N (Daylight White Fluorescent), or JW (White Light Fluorescent).
1
In the [White Balance] screen, use the four-way controller
(23) to select [JD (Daylight Colors Fluorescent)].
2
Press the four-way controller (5).
3
Press the four-way controller (23) to select the fluorescent light type.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved.
The icon displayed on the [White Balance] screen changes when the fluorescent light type is changed.
92
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way controller
(23) to select K (Manual).
2
Point the camera at the blank sheet of paper or other material so that it fills the frame displayed in the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode] menu.
Setting the AE Metering
You can set the area of the screen where the brightness is metered to determine the exposure.
L
M
N
Multi-segment metering
Centerweighted metering
Spot AE metering
The camera divides the screen into 256 areas, meters the brightness and determines the exposure.
The camera takes a reading of the overall brightness of the screen with the center of the screen having more influence on the exposure.
The camera determines the exposure by metering the brightness only at the center of the screen.
1
Use the four-way controller (23) to select [AE Metering] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a metering method.
4
Press the 4 button.
The setting is saved.
3
• When the shutter release button is pressed halfway, the brightness is metered and the exposure is determined.
• When the subject is not at the center of the screen and you want to use the
Spot AE metering, center the subject on the screen and press and hold the shutter release button halfway to lock the exposure, then compose your picture again and press the shutter release button fully.
• The AE Metering setting may not be changed depending on the selected
shooting mode. Refer to “Functions Available for Each Shooting Mode”
Saving the AE Metering setting 1p.123
93
3
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
AUTO
The sensitivity is automatically set by the camera.
(Default value: sensitivity 125-1600)
125
200
400
800
1600
3200
6400
The lower the sensitivity, the less noise that affects the image. The shutter speed will be slower in low light conditions.
Higher sensitivity settings use faster shutter speeds in low light conditions to reduce camera shake, but the image may be affected by noise.
1
Use the four-way controller (23) to select [Sensitivity] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the sensitivity.
4
Press the 4 button.
The setting is saved.
• The sensitivity cannot be changed in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.204) for details.
• When the shooting mode is set to (Report), the AUTO sensitivity range is fixed at 125-6400.
• When [Shake Reduction] is set to [Dual], 3200 and 6400 cannot be selected.
• When [Highlight Correction] is set to [On], the minimum sensitivity value is doubled.
Saving the Sensitivity setting 1p.123
94
Setting AUTO ISO Range
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 125-200, 125-400, 125-800, 125-1600, 125-3200, 125-
6400.
1
Use the four-way controller (23) to select [AUTO ISO Range]
in the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the sensitivity adjustment range.
4
Press the 4 button.
The setting is saved.
3
• The selectable sensitivity range differs depending on the selected shooting
mode. Refer to “Functions Available for Each Shooting Mode” (p.204) for
details.
• When [Shake Reduction] is set to [Dual], 125-3200 and 125-6400 cannot be selected.
• When [Highlight Correction] is set to [On], the minimum sensitivity value is doubled.
Setting the Exposure (EV Compensation)
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or underexposed.
1
Use the four-way controller (23) to select [EV
Compensation] in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select the exposure compensation value.
To brighten, select a positive (+) value. To darken, select a negative (–) value.
You can choose the compensation value in the range of –2.0 EV to +2.0 EV in 1/
3 EV steps.
95
• When a histogram is displayed in Still Picture Capture Mode or playback
mode, you can check whether the exposure is correct (p.28).
• EV Compensation cannot be used in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.204) for details.
3
Saving the EV Compensation setting 1p.123
Correcting the Brightness (D-Range Setting)
Expands the dynamic range and prevents bright and dark areas from occurring.
[Highlight Correction] adjusts the bright areas when the image is too bright and
[Shadow Correction] adjusts the dark areas when the image is too dark.
Auto
On
Off
The camera corrects the bright/dark areas automatically as necessary.
The camera always corrects the bright/dark areas.
The camera does not correct the bright/dark areas.
1
Use the four-way controller (23) to select [D-Range Setting]
in the [A Rec. Mode] menu.
2
Press the four-way controller (5).
The [D-Range Setting] screen appears.
3
Use the four-way controller (23) to select [Highlight Correction] or
D-Range Setting
[Shadow Correction].
Highlight Correction
Shadow Correction
AWVQ
AWVQ
MENU
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to change the setting.
96
6
Press the 4 button.
The setting is saved.
The D-Range Setting icon appears on the display.
P
Q
O
When [Highlight Correction] is set to [Auto] or [On]
When [Shadow Correction] is set to
[Auto] or [On]
When both [Highlight Correction] and [Shadow Correction] are set to
[Auto] or [On]
P
• When [Highlight Correction] is set to [On], the minimum sensitivity value is doubled.
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.102).
The D-Range setting cannot be set in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.204) for details.
Setting the Shake Reduction
By using this function, you can correct camera shake during shooting. You can select the optical correction only (Sensor Shift) or both the optical and electronic corrections (Dual). The default setting is [Sensor Shift].
Sensor Shift
Dual
Off
Corrects camera shake optically only.
Corrects camera shake both optically and electronically.
Does not apply optical or electronic correction.
1
Use the four-way controller (23) to select [Shake Reduction]
in the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the setting.
4
Press the 4 button.
The setting is saved.
3
97
3
• In 9 (Green) mode, the setting is fixed to [Sensor Shift].
• In (Handheld Night Snap) mode, the setting is fixed to [Dual].
• In the following situations, [Dual] cannot be set. When [Dual] has been already set, the setting automatically switches to [Sensor Shift].
• when j (Continuous Shooting), c (Burst Shooting), or g (Self-timer) is selected as the drive mode
• when the sensitivity is set to 3200 or 6400
• when the flash is activated
• when a picture is taken without pressing the shutter release button halfway
• when c (Digital SR), S (Fireworks), or (HDR) is selected as the shooting mode
• For correcting camera shake in C (Movie), (Underwater Movie), c
(Time-Lapse Movie), or (1cm-Macro Movie) mode, use the Movie SR
• When [Dual] is set, the optical correction is used whenever the camera can correct camera shake optically.
• Shake Reduction cannot be set in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.204) for details.
Shake Reduction may not be effective when the shutter speed is slow. We recommend you turn off Shake Reduction and use a tripod for slow shutter speeds.
98
Switching the Face Detection Function
The Face Detection function locates faces in the frame and automatically adjusts the focus and exposure for those faces. You can change the setting of the function so that the camera will automatically release the shutter when one or more of the subjects smile. The default setting is I (Face Detection On).
I (Face Detection On) The camera detects a person's face.
J (Smile Capture)
(Self-portrait Assist)
The camera automatically release the shutter when your subject smiles.
The LED Macro Lights flash when the camera detects a person's face. The position of the blinking LED Macro
Light indicates where the detected face is on the screen.
J (Self-portrait Assist +
Smile Capture)
The LED Macro Lights flash when the camera detects a person's face. The camera automatically release the shutter when your subject smiles.
(Face Detection Off) The camera does not detect a person's face.
1
Use the four-way controller (23) to select [Face Detection] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the setting.
4
Press the 4 button.
The setting is saved.
The Face Detection icon appears on the display.
3
• Face Detection AF and AE may not work if the subject is wearing sunglasses, has part of their face covered or is not looking toward the camera.
• If the camera cannot detect the subject’s face, the camera focuses with the setting currently selected in [Focusing Area].
• Even when Smile Capture is selected, it may not work and an image may not be captured, depending on the condition of the recognized faces, such as the faces are too small. If this happens, press the shutter release button to take a picture.
• In e (Pet) mode, the Face Detection function serves as the pet detection function (for one pet only).
• The Face Detection function cannot be selected in some shooting modes.
Refer to “Functions Available for Each Shooting Mode” (p.204) for details.
99
3
To Use the Self-portrait Assist Function
The LED Macro Lights around the lens blink when the camera detects people’s faces in (Self-portrait Assist) or J (Self-portrait Assist + Smile Capture) mode. The position of the blinking LED Macro Light indicates where the detected face is on the screen.
The position (area) of the detected face corresponds to the blinking LED Macro
Light as follows.
1
2 6
2 1 6
3 5
3 4 5
4
Example 1. When the camera detects a person in area 1 on the display.
Example 2. When the camera detects two people in areas 2 and 5 on the display.
100
• When the camera detects two faces in the same area, the closest LED
Macro Light to the blinking light also blinks.
• The camera can tell the positions of up to three detected faces by blinking the LED Macro Lights.
• When the camera detects four or five faces, four or five LED Macro Lights blink depending on the number of detected faces. When the camera detects six or more faces, all the six lights blink (the lights do not tell the positions of detected faces).
• In b (Auto Picture) mode, the LED Macro Lights turn off if the camera selects a mode in which the Face Detection function does not work after pressing the shutter release button halfway.
• When the Self-portrait Assist function is on, the LED Macro Lights do not turn off after the set period of Power Saving.
• The LED Macro Lights do not blink when the detected faces are too small.
3
Setting the Blink Detection Function
This specifies whether Blink Detection works when you use the Face Detection function. The default setting is O (On).
1
Use the four-way controller (23) to select [Blink Detection] in
the [A Rec. Mode] menu.
2
Use the four-way controller (45) to switch between O (On) or
P (Off).
O (On)
P (Off)
The Blink Detection function works.
The Blink Detection function does not work.
The setting is saved.
If the Blink Detection function detected closed eyes when shooting, [Closed eyes have been detected] is displayed for 3 seconds during Instant Review.
Setting the Instant Review
Use this setting to specify whether or not an Instant Review is displayed immediately
1 after images are shot. The default setting is O (On: displays the image).
Use the four-way controller (23) to select [Instant Review] in
the [A Rec. Mode] menu.
101
2
Use the four-way controller (45) to switch between O (On)
or P (Off).
O (On)
P (Off)
Instant Review is displayed.
Instant Review is not displayed.
The setting is saved.
3
Setting the Green Button Function
You can assign one of the following functions to the Green button: [Green Mode]
(p.71) or [Fn Setting] (p.103). You can activate the assigned function by just
pressing the Green button.
When the shooting mode is set to 9 (Green) mode, the Green Button setting from the [A Rec. Mode] menu is disabled. Switch to a mode other than 9 to access [Green Button] in the [A Rec. Mode] menu.
Assigning a Function to the Green Button
1
Use the four-way controller (23) to select [Green Button] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a function you want to
Green Button assign.
Green Mode
Fn Setting
4
MENU Cancel
Press the 4 button.
The setting is saved.
[Green Mode] is assigned to the Green button as the default setting.
OK OK
102
Assigning Frequently Used Functions to the Four-way Controller
(Fn Setting)
You can assign frequently used functions on the four-way controller. Using this function, you can directly set the functions by pressing the four-way controller without displaying the menu in capture mode.
In [Fn Setting], Still Picture Capture Mode and Movie Mode have different settings. To execute [Fn Setting] in Movie Mode, press the 3 button in Movie Mode and use
the four-way controller (45) to display the [C Movie] menu before step 1 on p.102.
3
Use the four-way controller (23) to select [Fn Setting].
Green Button
Green Mode
Fn Setting
+
+
+
+ Recorded Pixels
Quality Level
WB White Balance
MENU Cancel OK OK
4
Press the 4 button.
The [Fn Setting] screen appears.
5
Use the four-way controller (23) to select a key you want to assign a function to.
Green Button
Fn Setting
WB
EV Compensation
Recorded Pixels
Quality Level
White Balance
MENU
6
Press the four-way controller (5).
A pull-down menu appears.
7
Use the four-way controller (23) to select an item you want to assign.
Green Button
WB
ISO
AF
EV Compensation
Recorded Pixels
Quality Level
White Balance
Sensitivity
Focusing Area
MENU Cancel OK OK
8
Press the 4 button.
The setting is saved.
The functions assigned to the keys of the four-way controller can be used only when [Fn Setting] is assigned to the Green button.
3
103
You can assign only one function to each key.
The default settings for each mode
Still Picture Capture Mode
Default settings (2) EV Compensation
(3) Recorded Pixels
(4) Quality Level
(5) White Balance
Movie mode
(2) Movie SR
(3) EV Compensation
(4) Recorded Pixels
(5) White Balance
3
Items that can be assigned to each key
Selectable items
Still Picture Capture Mode
EV Compensation
Recorded Pixels
Quality Level
White Balance
Sensitivity
Focusing Area
Face Detection
Auto Macro
AE Metering
Highlight Correction
Shadow Correction
Sharpness
Saturation (Tone Adjustment) *
Contrast
Movie mode
Recorded Pixels
Movie SR
White Balance
Focusing Area
Face Detection
EV Compensation
Sharpness
Saturation (Tone Adjustment) *
Contrast
* The menu item to be displayed changes depending on the [Image Tone] selected in the [A Rec. Mode] menu. When you have selected either [Bright] or [Natural], [Saturation] is displayed, and when [Monochrome] is selected,
[Tone Adjustment] is displayed.
Changing Assigned Items
Press the Green button in capture mode to display the Fn Setting screen. Select an item with the four-way controller (2345), and press either the (23) or
(45) four-way controller to change the settings.
104
Setting the Image Sharpness (Sharpness)
You can give an image sharp or soft outlines.
1
Use the four-way controller (23) to select [Sharpness] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the sharpness level.
F Soft
G Normal
H Sharp 3
Setting the Saturation/Tone Adjustment
You can set either color brightness (Saturation) or the tone of monochrome images (Tone Adjustment).
The menu item to be displayed changes depending on the [Image Tone] selected in the [A Rec. Mode] menu.
Selected Image Tone
Bright, Natural
Monochrome
Displayed item
Saturation
Tone Adjustment
1
Use the four-way controller (23) to select [Saturation (or
Tone Adjustment)] in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select the level of saturation (or color tone for Tone Adjustment).
F
G
H
Low (Blue for Tone Adjustment)
Normal (B&W for Tone Adjustment)
High (Sepia for Tone Adjustment)
105
3
Setting the Image Contrast (Contrast)
For setting the image contrast level.
1
Use the four-way controller (23) to select [Contrast] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the contrast level.
F Low
G Normal
H High
Setting the Date Imprint Function
You can choose whether to imprint the date and/or time when taking still pictures.
1
Use the four-way controller (23) to select [Date Imprint] on
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the Date Imprint details.
Choose from [Date], [Date & Time], [Time] or [Off].
4
Press the 4 button.
The setting is saved.
• The date and/or time imprinted with the Date Imprint function cannot be deleted.
• Note that if a printer or image editing software is set to print the date and the images to be printed already have the date and/or time imprinted, the imprinted dates and/or times may overlap.
• O appears on the display in A mode when [Date Imprint] is set to any setting other than [Off].
• The date and/or time are imprinted on the picture with the display format
set in the [Date Adjustment] screen (p.46).
106
Setting the IQ Enhancer Processing
You can take pictures with clearer details by using image processing with the IQ
Enhancer technique.
1
Use the four-way controller (23) to select [IQ Enhancer] in
the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) The IQ Enhancer function works
P (Off) The IQ Enhancer function does not work
The setting is saved.
IQ Enhancer does not function in the following situations:
• When the drive mode is set to c (Burst Shooting)
• When the shooting mode is set to (Handheld Night Snap)
3
Setting the Macro Light
Set whether or not to turn on the LED Macro Lights around the lens.
The LED Macro Lights turn on when the [Macro Light] is set to O (On).
The default setting is P (Off).
1
Use the four-way controller (23) to select [Macro Light] in
the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) Turns on the LED Macro Lights
P (Off) Turns off the LED Macro Lights
The setting is saved.
• In (Digital Microscope) or (1cm-Macro Movie) mode, the LED Macro
Lights turn on regardless of whether the setting is turned on or off.
• If Power Saving is set to on, the light turns off after the set time.
• The LED Macro Lights turn off during playback and when using the USB connector except when outputting video signals in (Digital Microscope) or (1cm-Macro Movie) mode.
• (Self-portrait Assist) and J (Self-portrait Assist + Smile Capture) cannot be selected when [Macro Light] is set to O (On).
If you take a picture using the self-timer (g, Z) or a remote control unit (h, i ) while [Macro Light] is set to O (On), the LED Macro Lights remain on regardless of the countdown.
107
3
Setting the Electronic Level
The camera has the electronic level to detect the tilt of the camera.
When [Electronic Level] in the [A Rec. Mode] menu is set to O (On), the electronic level appears on the display.
The default setting is O (On).
1
Use the four-way controller (23) to select [Electronic Level]
in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) The electronic level is displayed.
P (Off) The electronic level is not displayed.
The setting is saved.
Using a Conversion Lens
You can attach the RICOH Wide Conversion Lens DW-5 to shoot pictures at a lens magnification of 0.8 (equivalent to a 35 mm camera’s 20 mm wide-angle zoom).
To use the DW-5, select O (On) for [Lens Adapter On] in the [A Rec. Mode] menu.
1
Use the four-way controller (23) to select [Lens Adapter On]
in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) The conversion lens is available.
P (Off) The conversion lens is not available.
The setting is saved.
108
• You need the Lens Adapter O-LA135 to mount the DW-5.
• See the documentation provided with the Lens Adapter O-LA135 for details on how to use the adapter.
• You cannot select O (On) for (Digital Microscope), (1cm-Macro
Movie), and 9 (Green) modes.
• The following restrictions apply when O (On) is selected:
•Zoom: Fixed at the full wide-angle
•Focus Mode: 10 cm to ∞
•Flash Mode: Fixed to a
•Remote Control: Unavailable
•Focus Assist: Fixed to P (Off)
•Macro Light: Fixed to P (Off)
3
109
Underwater Shooting
3
Underwater Shooting (Underwater Mode/
Underwater Movie Mode)
This camera complies with JIS waterproof grade 8 and can be used to take pictures at a depth of 14 meters continuously for 2 hours. In addition, this camera complies with JIS dustproof grade 6 (IP68).
Use the Underwater mode to take underwater still pictures that capture the blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
1
Use the four-way controller (2345) to select
(Underwater)/ (Underwater Movie) from the Capture Mode
Palette.
2
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
3
Press the shutter release button fully.
If you selected , a still picture is taken.
If you selected , movie recording starts. You can continue recording until the recorded movie time reaches 25 minutes. To stop recording, press the shutter release button fully again. An underwater movie can be recorded in the same way as C (Movie) mode.
• Before shooting underwater, make sure that there is no dirt or sand on the waterproof seal of the battery cover and check that the cover is securely locked.
• Before opening the battery cover after using the camera underwater, make sure that there is no water, dirt, or sand on the cover or anywhere else on the camera. Wipe the camera before opening the cover.
• When shooting in (Underwater Movie) mode, use SD Speed Class 4 or higher cards.
Regarding Waterproof, Dustproof, and Shockproof Design 1p.8
• If the focus mode is set to \ in mode, you can adjust the focus before recording starts and during recording.
• The optical zoom and digital zoom can be used in mode before recording starts. The digital zoom can also be used during recording.
• Movies recorded in mode capture a different area than still pictures.
110
Although the camera is designed to be waterproof and dustproof, avoid using the camera under the following conditions. It may momentarily be subjected to water pressure beyond that covered in the guarantee and water may enter the interior of the camera.
• Jumping into the water while holding the camera
• Swimming while holding the camera in your hand
• Using the camera in environments where water is applied forcefully, such as strong river currents and waterfalls
3
111
Recording Movies
3
Recording Movies
This mode enables you to record movies. Sound is recorded at the same time.
Shutter release button
W/T button
Four-way controller
4 button
1
Use the four-way controller (2345) to select C (Movie) from the Capture Mode Palette.
2
Press the 4 button.
The C (Movie) mode is selected and the
1 camera returns to capture mode.
The following information appears on the display.
1 Movie mode icon
2 Movie Shake Reduction icon
3 Remaining recordable time
REC
4 REC indicator (blinks during
2 3 recording)
5 Focus frame (does not appear during recording)
4
6 Still picture capture icon (appears during recording)
7 Electronic level (does not appear during recording)
5
OK
6 7
You can change the captured area by pressing the W/T button.
T Enlarges the subject.
W Widens the area that is captured by the camera.
112
3
Press the shutter release button fully.
Recording starts. You can continue recording until the recorded movie time reaches 25 minutes.
Saving a still picture during movie recording
• If you press the 4 button during movie recording, the frame captured at the moment you pressed the 4 button is recorded as a still picture.
• A still picture is recorded with the default settings made in the [A Rec. Mode]
• Up to three still pictures can be recorded per each continuous movie recording.
• The recorded still pictures will be saved when the movie recording is stopped.
• Still picture capture with the 4 button is not available in (High Speed
Movie) or c (Time-Lapse Movie) modes, or when the number of recorded pixels and frame rate settings are set to .
• The angle of view may change, depending on the number of recorded pixels for movies.
• The image may be distorted, depending on recording conditions.
4
Press the shutter release button fully.
Recording stops.
3
• You can use the optical zoom and autofocus functions while recording
movies when [Enable Autofocus] (p.117) and [Enable Optical Zoom]
(p.117) are set to O (On) in the [C Movie] menu. However, operation noise
is recorded in the movie.
• The focus mode can be changed before recording starts.
• When the focus mode is set to \(Manual Focus), you can adjust the focus before recording starts and during recording.
• When the shooting mode is set to C (Movie), Face Detection is automatically set to on. You can select Smile Capture or Face Detection Off
before starting recording a movie (p.99). When the Smile Capture function
is activated, movie recording starts automatically when the camera recognizes the subject’s smile. However, the Smile Capture function may not work depending on the condition of the recognized faces, and movie recording may not start automatically. If this happens, press the shutter release button to start movie recording.
• You can record a movie using a remote control unit (optional) (p.80).
• When you use the SD Memory Card, use SD Speed Class 4 or higher cards.
• Movies recorded in C mode capture a different area than still pictures.
113
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second, recording will continue as long as you keep the button pressed. Shooting stops when you take your finger off the shutter release button.
3
Recording a Movie Quickly Using the Movie
Button
This camera starts/stops movie recording simply by pressing the Movie button, without selecting C (Movie) from the Capture Mode Palette. This is useful when you want to start recording quickly.
Movie button
1
Press the Movie button.
Recording starts. You can continue recording until the recorded movie time reaches 25 minutes.
2
Press the Movie button again.
Recording stops.
• You cannot stop recording by pressing the shutter release button. To stop recording, press the Movie button.
• You cannot start recording a movie by pressing the Movie button when the shooting mode is set to b (Shutter Priority), C (Movie), (Underwater
Microscope),
Movie), c (Time-Lapse Movie),
(Interval Shot), (High Speed
(Interval Movie), (1cm-Macro
Movie), or e (Pet), or the camera is in Q mode.
• Movies are recorded with the default settings for the [C Movie] menu when
recording movies with the Movie button (p.213).
114
Selecting the Number of Recorded Pixels and
Frame Rate for Movies
You can choose the number of recorded pixels and frame rate settings for movies.
The more pixels there are, the clearer the details and the bigger the file size. The more frames per second, the better the quality of the movie, but the file size becomes larger.
Setting
Recorded
Pixels
Frame
Rate
Use
1920x1080 30 fps
1280x720 60 fps
M 1280×720 30 fps
Records images in full HDTV format (16:9).
Movement is recorded smoothly. (default setting)
Records images in HDTV format (16:9). Quick movement is recorded smoothly.
Records images in HDTV format (16:9). Movement is recorded smoothly.
* The frame rate (fps) indicates the number of frames per second.
1
Use the four-way controller (23) to select [Recorded Pixels]
in the [C Movie] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the number of
Rec. Time 02:26 recorded pixels and frame rate.
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
3
MENU Cancel OK OK
4
Press the 4 button.
The setting is saved.
Due to the following restriction, the actual recordable time may differ from the recordable time (Rec. Time) that appears in the top-right corner of the screen.
• The maximum recordable time of a file is 25 minutes.
115
3
Setting the Movie SR (Movie Shake Reduction)
Function
In C (Movie), ?
(1cm-Macro Movie) modes, you can correct camera shake while you are recording a movie with the Movie SR
(Movie Shake Reduction) function.
The default setting is O (On).
1
Use the four-way controller (23) to select [Movie SR] in the
[C Movie] menu.
2
Use the four-way controller (45)
to select O (On) or P (Off).
Movie
O (On)
P (Off)
Automatically corrects camera shake.
Does not correct camera
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom shake.
The setting is saved.
MENU Exit
Suppressing Wind Noises during Movie
Recording (Wind Suppression)
You can reduce wind noises during movie recording.
The default setting is P (Off).
1
Use the four-way controller (23) to select [Wind
Suppression] in the [C Movie] menu.
2
Use the four-way controller (45)
to select O (On)/P (Off).
Movie
O (On)
P (Off)
Suppresses wind noises.
Does not suppress wind noises.
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
The setting is saved.
MENU Exit
116
Constantly Adjusting Focus While Recording
Movies
The camera constantly tracks the subject during movie recording and automatically adjust focus. This is useful for shooting a moving subject.
The default setting is P (Off).
1
Use the four-way controller (23) to select [Enable
Autofocus] in the [C Movie] menu.
2
Use the four-way controller (45)
to select O (On)/P (Off).
Movie
O (On) Continues to focus on the subject during movie recording.
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
P (Off) Locks focus by pressing the shutter release button MENU Exit halfway before recording.
The setting is saved.
• Noise from focusing operation is recorded while recording movies.
• When set to O, the autofocus area is fixed to J (Multiple) during movie recording.
3
Setting the Optical Zoom
You can use the optical zoom while recording movies.
The default setting is P (Off).
1
Use the four-way controller (23) to select [Enable Optical
Zoom] in the [C Movie] menu.
2
Use the four-way controller (45)
to select O (On)/P (Off).
Movie
O (On)
P (Off)
Optical zoom is available.
Optical zoom is not available.
Recorded Pixels
Movi e SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
The setting is saved.
MENU Exit
Noise from zooming operation is recorded while recording movies.
117
3
Combining Pictures Taken at a Set Interval into a
Movie (Interval Movie)
In this mode, you can record multiple still pictures taken automatically at a set interval from a set time, as a movie file.
Interval
Total Time
Start Delay
Set the shooting interval to 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the total time, from 10 minutes to 359 hours. The total time and the time unit change depending on the interval set. The total time can be set in increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the start delay, from 0 minutes to 24 hours. You can set this in 1minute increments. If the start time is set to 0 minutes, the first picture is taken as soon as the shutter release button is pressed.
1
Use the four-way controller (2345) to select (Interval
Movie) from the Capture Mode Palette.
2
Press the 4 button.
The current Interval Movie settings appear for approximately one minute. To take pictures with the current settings, go to step 10.
3
Press the 4 button while the current settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
Interval Shot
1 Press the four-way controller (5).
Interval 1 min.
A pull-down menu appears.
Total Time 0 hr.
10 min.
2 Use the four-way controller (23)
Start Delay 0 hr.
0 min.
to set the interval, then press the
4 button.
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Total Time].
MENU
118
6
Set the total time.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
7
The frame returns to [Total Time].
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The Interval Movie settings are saved and the camera returns to capture mode.
10
Press the shutter release button to take a picture.
Interval movie recording starts.
The LCD turns off between shots (during standby). Press the power button during standby to display the remaining time and shooting interval on the screen.
The [Stop interval shooting?] message is displayed when the power button and then the 3 button are pressed during standby. Pressing the 4 button cancels interval movie recording.
3
• Confirm that the battery is sufficiently charged before starting interval movie recording. If the battery is not sufficiently charged, it may become depleted during interval movie recording and cause recording of the movie to stop.
• For interval movie recording, the following settings are fixed. Recorded
Pixels: , Frame Rate: 30fps, Quality Level: C, Movie SR: P (Off), and Flash Mode: a.
• Interval movie recording stops if the SD Memory Card is removed or inserted during standby.
• Sound cannot be recorded during interval movie recording.
• When you use the SD Memory Card, use SD Speed Class 4 or higher cards.
119
3
• If you set a start delay, a start time corresponding to the current time and the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you set, as indicated in the table below.
Interval
1 min
5 min
10 min
30 min
1 hr
Total time that can be set
30 fps
10 minutes to 5 hours and 59 minutes
(in increments of 1 minute)
30 minutes to 29 hours and 55 minutes
(in increments of 5 minutes)
1 hour to 59 hours and 50 minutes
(in increments of 10 minutes)
3 hours to 179 hours and 30 minutes
(in increments of 30 minutes)
6 hours to 359 hours
(in increments of 1 hour)
• The Date Imprint function (p.106) is available for Interval Movie mode.
Using the Time-Lapse Movie Function
You can capture frames for fast motion playback.
1
Use the four-way controller (2345) to select c (Time-
Lapse Movie) from the Capture Mode Palette.
2
Press the 4 button.
The camera returns to capture mode.
120
3
Press the shutter release button fully.
Recording starts. The maximum length of continuous recording time is 25 minutes.
4
Press the shutter release button fully again.
Recording stops.
• The number of recorded pixels is fixed to 640 × 360.
• The frame rate is fixed to 15 fps when recording. The frame rate is 240 fps when playing back.
• Zoom is not available during recording.
• The flash does not discharge in this mode.
• The Blink Detection, Enable Autofocus, and Enable Optical Zoom functions are fixed to P (Off).
• (Self-portrait Assist) and J (Self-portrait Assist + Smile Capture) are not available.
Using the High Speed Movie Function
The camera records a high speed movie for slow motion playback.
1
Use the four-way controller (2345) to select (High
Speed Movie) from the Capture Mode Palette.
2
Press the 4 button.
The camera returns to capture mode.
3
3
Press the shutter release button fully.
Recording starts. You can continue recording until the recorded movie time reaches 15 seconds per file.
4
Press the shutter release button fully again.
Recording stops.
• The recorded pixels is fixed to 1280 x 720.
• The flash does not discharge in this mode.
• The Movie SR, Enable Autofocus, and Enable Optical Zoom functions are fixed to P (Off).
• When you use the SD Memory Card, use SD Speed Class 4 or higher cards.
• Zoom is not available during recording.
• (Self-portrait Assist) and J (Self-portrait Assist + Smile Capture) are not available.
121
3
Using the 1cm-Macro Movie Function
You can record movies of objects at the closest distance of 1 cm. The LED Macro
Lights around the lens are always lighted, so you can record minute text, the veins of leaves, or specimens of tiny insects etc.
The illumination of the LED Macro Lights may be uneven or insufficient depending on the shooting conditions.
1
Use the four-way controller (2345) to select (1cm-Macro
Movie) from the Capture Mode Palette.
2
Press the 4 button.
The camera returns to capture mode.
3
Press the W/T button.
If you press T, the camera enlarges the subject.
You can enlarge the subject up to 8 times (*).
(*)Intelligent Zoom is included. Up to 4 times for the optical zoom.
W Wide (left)
Widens the area that is captured by the camera.
T Tele (right)
Enlarges the subject.
4
Press the shutter release button fully.
Recording starts. The maximum length of continuous recording time is 25 minutes.
5
Press the shutter release button fully again.
Recording stops.
• The flash does not discharge in this mode.
• The Face Detection and Blink Detection functions are not available.
• Attaching the supplied macro stand (O-MS2) reduces camera shake during
122
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the camera is turned off.
For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose O or P
(Off) (to choose whether the settings are saved or not when the camera is turned off).
The items which can be set to O or P in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)
If you select O, the settings will be saved in the status they were in immediately before the camera was turned off. If you select P, the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is O or P.
Item
Face Detection
Default setting
P
Page
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
Sensitivity
Description
The [Face Detection] setting in the [A Rec.
Mode] menu
The flash mode set with the four-way controller (4)
The drive mode set with the four-way controller (2)
The focus mode set with the four-way controller (5)
The zoom position set with the W/T button.
The manual focus position set with the fourway controller (23)
The [White Balance] setting in the
[A Rec. Mode] menu
The [Sensitivity] setting in the
[A Rec. Mode] menu
O
P
P
P
P
P
P
P
AE Metering
Digital Zoom
DISPLAY
File No.
The [AE Metering] setting in the
[A Rec. Mode] menu
The [Digital Zoom] setting in the
[A Rec. Mode] menu
The information display mode set with the
4 button
If a new SD Memory Card is inserted when set to O (On), file numbers are assigned sequentially.
P
O
P
O
⎯
3
123
3
1
Use the four-way controller (23) to select [Memory] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [Memory] screen appears.
3
Use the four-way controller (23) to choose an item.
Memory 1/3
Face Detection
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
MENU
4
Use the four-way controller (45) to select O (On) or P (Off).
124
4Playing Back an d Del e t i n g
I m a g e s
Playing Back Images
Playing Back Still Pictures
1
Press the Q button after taking a picture.
The camera enters Q mode and the image appears on the display. Displaying one image in full in Q mode (default setting) is called single-image display.
To Play Back the Previous or Next Image
2
Press the four-way controller (45).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is displayed to display the Delete screen. Press the four-way controller (2) to select [Delete] and press the 4 button.
Q button
Four-way controller
4 button i button
File number
4
Delete
Cancel
For information on other deletion procedures 1p.136
125
Playing Back a Movie
You can play back the movies you have taken. The sound is played back at the same time.
1
Enter Q mode and use the four-way controller (45) to choose the movie you want to play back.
2
Press the four-way controller
(2).
10 0017
00 : 30
Playback starts.
4
The following operations can be performed during playback.
Four-way controller (2)
Zoom button right (y)
Pauses playback
Increases the volume
Zoom button left (f) Reduces the volume
Press and hold the four-way controller (5) Fast-forwards playback
Press and hold the four-way controller (4) Fast-reverses playback
The following operations can be performed while playback is paused.
Four-way controller (5)
Four-way controller (2)
Forwards frames
Resumes playback
(*)In frame-reverse mode, the first frame of every 30 frames appears on the display with each press of the four-way controller( 4 ). For example, when you reverse frames from the second frame to the 31st frame, the first frame appears on the display, and when you reverse frames from the 32nd to 61st, the 31st frame appears.
3
Press the four-way controller (3).
Playback stops.
Only movies taken with this camera can be played back. Movies taken with other cameras cannot be played back.
126
Multi-Image Display
6-Image Display/12-Image Display
You can display 6 or 12 thumbnails of captured images at a time.
1
Press the f button in Q mode.
The 6-image display appears showing a page consisting of 6 thumbnail images.
Pressing the f button again changes it to a 12-image display.
A page consisting of 6 or 12 thumbnail images appears. The displayed images change 6 or 12 images at a time page by page.
Use the four-way controller (2345) to move the frame. If there are too many images to display on one page, pressing the four-way controller (24) while the image
1 is selected will display the previous page.
Similarly, if you choose the image 2 and press the four-way controller (35), the next page appears.
♦ indicates that the previous or next screen is stored in a separate folder.
1
1 ɟ
2
Select & Delete 100-0010
6-Image Display
Folder divider icon
Frame
4
Select & Delete
12-Image Display
2
100-0010
127
The icons that appear on the images indicate the following:
C c
(No icon) Still picture
Movie (the first frame appears)
High Speed Movie (the first frame appears)
Time-Lapse Movie (the first frame appears)
Press the 4 button to switch to single-image display of the selected image.
Press the Q button to switch to A mode.
4
Folder Display/Calendar Display
Press the f button in 12-image display to switch to folder or calendar display.
Press the Green button to switch between folder display and calendar display.
1
Press the f button twice in Q mode.
The screen changes to 12-image display.
2
Press the f button.
The screen changes to folder display or calendar display.
Folder display
The list of folders with recorded images appears.
Use the four-way controller (2345) to move the frame.
If you select a folder and press the y button or the 4 button, the images in the selected folder are displayed in 12-image display.
Frame
101
105
102
106
103 104
101_0707
128
Calendar display
Stored images are displayed by date in calendar format.
The first image captured on a date is displayed for that date on the calendar.
22
Frame
33 44 65
66 77 88 99
Use the four-way controller (2345) to move the frame.
If you select a date and press the y button, the images captured on that date are displayed in 12-image display.
Select a date and press the 4 button to switch to single-image display of the first image captured on that date.
• Press the 3 button in folder display or calendar display to switch to
12-image display.
• Press the Q button or press the shutter release button halfway in folder display or calendar display to switch to A mode.
4
Using the Playback Functions
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to choose an icon.
Slideshow
The guide for the selected function appears below.
F o r c o n t i n u o u s l y p l a y i n g b a c k i m a g e s . S c r e e n o r s o u n d e f f e c t s c a n b e s e t
MENU Cancel
1 / 2
OK OK
3
Press the 4 button.
The playback function is recalled.
129
100-0038 100-0038
4
Edit
Edit
Edit
100-0038
02/02/'12 14:25
14:25
100-0038
14:25
MENU
Edit 02/02/'12 14:25 02/02/'12
Slideshow 1 / 2
F o r c o n t i n u o u s l y p l a y i n g b a c k i m a g e s . S c r e e n o r s o u n d e f f e c t s c a n b e s e t
MENU Cancel OK OK or
Image Rotation 1 / 2
R o t a t e s c a p t u r e d i m a g e s .
U s e f u l w h e n v i e w i n g v e r t i c a l i m a g e s o n a T V
MENU Cancel OK OK
OK or
38 38 '10/02/02 14:25 '10/02/02 14:25
Closes the Playback Mode
Palette and goes to A mode.
MENU Cancel OK OK
Goes to the screen for selected playback function.
38 38 '10/02/02 14:25 '10/02/02 14:25
• When the frame is placed over an icon on the Playback Mode Palette, the guide of that function appears.
• You can set the guide of the function not to display on the Playback Mode
130
Playback Mode Palette u s k
P
E
Playback Mode
Slideshow
Image Rotation
Small Face Filter
Ink Rubbing Filter
Collage
Digital Filter
HDR Filter
Original Frame
Description
For continuously playing back images. Screen or sound effects can be set
Rotates captured images. Useful when viewing vertical images on a TV
Reduces the size of faces in the image, for wellproportioned portraits
Creates an image similar to ink rubbing from original pictures
Page
Creates a collage print page from saved image files p.150
For modifying images with a Color filter or Soft filter p.147
Processes single image to simulate HDR effect
Available to make from the kind and color of a frame. Available to enter text
[
Movie
Edit
Save as
Still Image
Divide
Movies
For saving one frame from a movie as a still picture
For dividing a movie into two
Z
Adding title picture For adding a title picture to your movie
Red-eye Edit
Attempts to edit out the red-eye effect in image.
Success may vary n Resize
Changes Recorded Pixels and Quality Level to make the file size smaller
o p
Z Protect r
Cropping
Image Copy
DPOF
Start-up Screen
For cropping images to the size you like. Saved as a new image
To copy images between the built-in memory and an SD Memory Card
Protects images from delete function. Format function still erases all
For the print settings. Useful when printing at a printing service
For setting a captured image as the Start-up
Screen
4
131
4
Slideshow
You can play back recorded still pictures and movies one after another.
1
Enter Q mode and use the four-way controller (45) to choose the image to start the slideshow with.
2
Use the four-way controller (2345) to select u (Slideshow) from the Playback Mode Palette.
3
Press the 4 button.
The slideshow setting screen appears.
4
Use the four-way controller (23) to select [Start].
Interval
Screen Effect
Sound Effect
Start
MENU
5
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow. To resume the slideshow, press the 4 button again.
6
Press any button other than the 4 button.
The slideshow stops.
To Set the Slideshow Conditions
1
You can set the playback interval, a screen effect and sound effect for when one image changes to the next.
Use the four-way controller (23) to select [Interval] in step 4 on
Start
Interval
Screen Effect
Sound Effect
3sec.
Wipe
MENU
2
Press the four-way controller (5).
A pull-down menu appears.
132
3
Use the four-way controller (23) to change [Interval] and
press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
4
Use the four-way controller (23) to select [Screen Effect].
After selecting [Screen Effect], press the four-way controller (5). A pull-down menu appears with the following items. Use the four-way controller (23) to select an item and press the 4 button.
Wipe The next image slides over the previous one from left to right
Checker The next image appears in small square mosaic blocks
Fade
The current image gradually fades out and the next image fades in
Random Various effects are used randomly
Off No effect
5
Use the four-way controller (23) to select [Sound Effect].
6
Use the four-way controller (45) to select O (On) or P (Off).
Except when the [Screen Effect] is set to [Off], you can choose O (On) or P (Off) for the sound that is played when one image changes to the next.
7
Use the four-way controller (23) to select [Start].
8
Press the 4 button.
The slideshow starts with the selected interval and effects.
4
• The slideshow will continue until you press any button other than the 4 button.
• Movies will be played back through to the end before the next picture is displayed, regardless of the Interval setting. However, pressing the fourway controller (5) while playing back a movie skips to the next image.
• When [Random] is selected for the screen effect, the interval is fixed to the setting selected in step 3 and the sound effect is set to off.
Connecting the Camera to an AV Device 1p.141
133
4
Rotating the Image
1
Press the Q button after taking a picture.
The image appears on the display.
2
Use the four-way controller (2345) to select s (Image
Rotation) from the Playback Mode Palette.
3
Press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the rotation
direction and press the 4 button.
The rotated image is saved.
MENU Cancel OK OK
• Movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated state.
134
Zoom Playback
You can magnify an image up to ten times.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to magnify.
2
Press the y button.
The image is magnified (×1.1 to ×10). Holding down the y button continuously magnifies the image.
With [Quick Zoom] (p.183) set to O (On), pressing y button once magnifies
the image to 10×.
You can use the + mark of the guide at the bottom left of the screen to check which portion of the image is magnified.
4
The following operations can be performed while an image is magnified.
Guide
Zoom button right (y)
Zoom button left (f)
Makes the image bigger (max. of 10×)
Makes the image smaller (min. of 1.1×)
3
Press the 4 button.
The image returns to single-image display.
Movies cannot be magnified.
135
Deleting Images
Delete images that you do not want to keep.
Deleting a Single Image
You can delete a single image.
Protected images cannot be deleted (p.139).
4
1
Enter Q mode and use the four-way controller (45) to choose the image you want to delete.
2
Press the i button.
A confirmation screen appears.
3
Use the four-way controller (2) to select [Delete].
Delete
Cancel
4
Press the 4 button.
The image is deleted.
136
Deleting Selected Images
You can delete multiple images selected from the 6- or 12-image display at once.
Protected images cannot be deleted (p.139).
1
Press the f button once or twice in Q mode.
6-image display or 12-image display appears.
2
Press the i button.
P appears on the images.
Select & Delete
3
Use the four-way controller
(2345) to choose the images that you want to delete and press
the 4 button.
O appears on the selected images.
Pressing and holding the y button displays
MENU Cancel Delete OK the selected image in single-image display and you can check whether to delete the image. Releasing the button returns to
6- or 12-image display. However, protected images cannot be displayed in single-image display.
4
Press the i button.
A confirmation screen appears.
5
Use the four-way controller (2) to select [Delete].
6
Press the 4 button.
The selected images are deleted.
4
137
Deleting All Images
Deletes all the images at once.
Protected images cannot be deleted (p.139).
4
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller
(5) once or twice.
2
Use the four-way controller (23) to select [Delete All].
Setting
Reset
Delete All
Pixel Mapping
Startup Shortcut
Format
Auto Image Rotation
MENU Exit
3
Press the four-way controller (5).
A confirmation dialog appears.
4
Use the four-way controller (2) to select [Delete All].
5
Press the 4 button.
All the images are deleted.
4 / 5
138
Protecting Images from Deletion (Protect)
You can protect stored images from being accidentally deleted.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to protect.
2
Use the four-way controller (2345) to select Z (Protect) from the Playback Mode Palette.
3
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
4
Use the four-way controller (2) to select [Single Image].
Single Image
4
5
Press the 4 button.
The message [Protects this image] appears.
To protect another image, use the four-way controller (45) to select another image.
6
Use the four-way controller (2) to select [Protect].
Protect
Unprotect
OK
7
Press the 4 button.
The selected image is protected.
To protect other images, repeat steps 4 to 7.
Select [Cancel] to exit the Protect setting.
• To cancel the protection of the image, select [Unprotect] in step 6.
• Y appears on the protected images during playback.
139
To Protect All Images
1
Select [All Images] in step 4 on
All Images
4
2
Press the 4 button.
3
Use the four-way controller (2) to select [Protect].
Protect
Unprotect
OK
4
Press the 4 button.
All the images are protected and the screen shown in step 1 reappears.
5
Use the four-way controller (23) to select [Cancel] and press
the 4 button.
The Playback Mode Palette reappears.
Protected images are deleted when the SD Memory Card or the built-in
To cancel the protection of all your images, select [Unprotect] in step 3.
140
Connecting the Camera to an AV Device
You can connect the camera to a TV or other device with a video input terminal or HDMl terminal and playback images.
• The power lamp on the camera lights up during a connection.
• If you intend to use the camera continuously for a long period, use of the
AC adapter kit K-AC117 (optional) is recommended. (p.37)
• For an AV device with multiple video input terminals, check the operating manual of the AV device, and select the video input terminal to which the camera is connected.
• You cannot output both composite and HDMI video signals at the same time.
• The camera display turns off while the camera is connected to an AV device.
• You cannot adjust the volume on the camera when connected to an AV device. Adjust the volume on the AV device.
• When the camera is connected to an AV device, you can change the images displayed on the screen of the connected AV device with the remote control (optional).
4
Connecting the Camera to a Video Input Terminal
By using the optional AV cable (I-AVC7), you can capture and play back images on a device with a video input terminal, such as a TV.
External Input
Terminal
VIDEO
AUDIO
(L) (R)
USB/AV terminal
Yellow White
141
4
7
1
Turn the AV device and camera off.
2
Slide the battery cover lock as indicated by 1, and release the lock.
3
Slide the release latch as indicated by 2, and open the battery
cover towards 3.
4
Connect the AV cable to the USB/AV terminal.
5
Connect the other ends of the AV cable (yellow: video, white: audio) to the video input terminal and audio input terminal of the AV device.
When using stereo sound device, insert the sound terminal into the L (white) terminal.
6
Turn the AV device on.
When the device that the camera is connected to and the device that plays back images are different, turn both devices on.
When viewing images on AV device with multiple video input terminals (such as a TV), refer to the operating manual of the device and select the video input terminal to which to connect the camera.
Turn the camera on.
• Depending on the country or region, images may fail to be played back if the video output format is set different from the one in use there. If this
happens, change the video output format setting (p.179).
• The camera’s AV output is output at normal resolution.
To watch movies shot at , or M at HDTV resolution, output the
movies as HDMI or transfer them to a computer (p.143).
Close the battery cover securely when not using the terminal.
<How to close the battery cover>
Close the cover, slide the release latch in the opposite direction indicated by
2 , and then slide the battery cover lock in the opposite direction indicated by
1 until it clicks.
142
Connecting the Camera to an HDMI Terminal
Use a commercially available HDMI cable to connect the camera to a device with an HDMI terminal.
HDMI terminal
4
1
Turn the AV device and camera off.
2
Slide the battery cover lock as indicated by 1, and release the lock.
3
Slide the release latch as indicated by 2, and open the battery
cover towards 3.
4
Connect the HDMI cable to the HDMI terminal.
5
Connect the other end of the HDMI cable to the HDMI terminal on the AV device.
6
Turn the AV device and camera on.
The camera information is displayed on the screen of the connected AV device.
• The camera has a Type D (Micro) HDMI terminal. Use a commercially available HDMI cable that matches your AV device.
• If you play back movies by connecting the camera to an AV device with a
commercially available HDMI cable, set the output format to “Selecting the
Close the battery cover securely when not using the terminal.
<How to close the battery cover>
Close the cover, slide the release latch in the opposite direction indicated by
2 , and then slide the battery cover lock in the opposite direction indicated by
1 until it clicks.
143
Editing Images
5
• Images taken with the recorded pixels of resized.
or movies cannot be
• You cannot select a larger resolution and higher quality level than that of the original image.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to resize.
2
Use the four-way controller (2345) to select n (Resize) from the Playback Mode Palette.
3
Press the 4 button.
The screen for choosing the recorded pixels and quality level appears.
4
Select [Recorded Pixels] and
[Quality Level].
Use the four-way controller (45) to choose the desired recorded pixels and quality level.
Use the four-way controller (23) to switch between [Recorded Pixels] and [Quality
Recorded Pixels 16M
Level].
5
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
6
Use the four-way controller (23) to select [Overwrite] or
[Save as].
7
Press the 4 button.
The resized image is saved.
144
Changing the Image Size (Resize)
By changing the recorded pixels and quality level of a selected image, you can make the file size smaller than the original. You can use this function to continue taking pictures when the SD Memory Card or the built-in memory is full, by making the images smaller and overwriting the original images to make more space available.
5Editing and Printing
Cropping Images
You can delete the unwanted part of a picture and save the cropped image as a separate image.
Images taken with the recorded pixels of cropped.
or movies cannot be
1
Enter Q mode and use the four-way controller (45) to choose the image you want to crop.
2
Use the four-way controller (2345) to select o (Cropping) from the Playback Mode Palette.
3
Press the 4 button.
The cropping screen appears.
The largest size of the cropped image is shown with a green frame on the screen. The cropped image cannot be larger than this cropping frame size.
4
Choose the cropping area.
The following operations specify the size and position of the cropping frame.
Zoom button
(f/y)
Four-way controller
(2345)
Changes the size of the cropping frame
Moves the cropping frame up, down, left and right
Green button Rotates the cropping frame.
• The button is displayed only when the cropping frame can be rotated.
5
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to the size of the cropped image. The image is saved at the same quality level as the original.
5
145
5
Processing Images to Make Faces Look Smaller
Images are processed to reduce the size of people’s faces detected with the Face
Detection function (p.99) when taking pictures so that they look smaller.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to edit.
2
Use the four-way controller (2345) to select k (Small Face
Filter) from the Playback Mode Palette.
3
Press the 4 button.
The face detection frames are displayed on the faces that can be processed.
Proceed to step 6 when there is only one detection frame.
4
Use the four-way controller
(2345) to select a face to be processed.
A green frame indicates the face that is to be processed.
5
Press the 4 button.
6
Use the four-way controller (45) to change the reduction ratio.
F Approx. 5%
G
H
Approx. 7%
Approx. 10%
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
8
Use the four-way controller (23) to select [Overwrite] or
[Save as].
9
Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
146
You may not be able to process images in the following situations:
• When the size of face taken is too large or too small, in relation to the image
• When faces are located in the edges of the image
In such cases, the face detection frame in step 3 will not appear.
Using the Digital Filters
This mode lets you change the color tones and perform special processing on a selected image.
B&W/Sepia
Toy Camera
Retro
Color
Extract Color
Changes color images to black and white or processes using the sepia filter.
Images seem to have been taken with a toy camera.
Images have the feel of old photos with a white border. You can choose from three filters: Original image, amber, and blue.
Processes the image using the selected color filter. You can choose from six filters: red, pink, purple, blue, green, and yellow.
Processes the image using the selected color extraction filter. You can choose from three filters: red, green, and blue.
Color Emphasis There are 4 filters: Sky Blue/Fresh Green/Delicate Pink/Autumn
Leaves.
High Contrast Adjusts the contrast of the captured images.
Starburst Processes the image with a special sparkling look achieved by adding cross-like effects to a highlighted area, such as town lights at night, light reflected from water, or other light sources. You can choose from three filters: Cross, Heart, and Star.
Soft Processes the image into a soft image that appears soft overall.
Fish-eye
Brightness
Miniature
Applies a fish-eye lens effect to images.
Adjusts the brightness of the image.
Blurs a part of the image to create a fake miniature scene.
5
Movies or images taken with another camera cannot be edited using the
Digital Filter function. An error message appears if you choose this function from the Playback Mode Palette and press the 4 button.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to edit.
2
Use the four-way controller (2345) to select P (Digital
Filter) from the Playback Mode Palette.
147
5
3
Press the 4 button.
The digital filter selection screen appears.
1 B&W/Sepia
2 Toy Camera
3 Retro
4 Color
5 Extract Color
6 Color Emphasis
7 High Contrast
8 Starburst
9 Soft
10 Fish-eye
11 Brightness
11
7
9
3
5
9
11
5
7
1 2
4
8
10
4
6 6
8
12 Miniature
4
Use the four-way controller (23) to choose the digital filter you want to use.
The preview image of the result of the filter effect appears.
5
Use the four-way controller (45) to adjust the effect as necessary.
Retro
Toy Camera
High Contrast
Fish-eye
Brightness
Miniature
Four-way controller
(4)
Blue
Weak
Weak
Weak
Dark
Upper
Default Setting
Original image
Standard
Standard
Standard
Standard
Upper and lower
Four-way controller
(5)
Amber
Strong
Strong
Strong
Bright
Lower
B&W/Sepia
Starburst
B&W ↔ Sepia
Color Red ↔ Pink ↔ Purple ↔ Blue ↔ Green ↔ Yellow
Extract Color Red ↔ Green ↔ Blue
Color Emphasis Sky Blue ↔ Fresh Green ↔ Delicate Pink ↔ Autumn Leaves
Cross ↔ Heart ↔ Star
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
148
7
Use the four-way controller (23) to select [Overwrite] or
[Save as].
8
Press the 4 button.
The image processed with the filter is saved.
Using the HDR Filter
Adjusts parts of the image that are too bright or too dark and processes images to simulate an HDR effect.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to edit.
2
Use the four-way controller (2345) to select (HDR
Filter) from the Playback Mode Palette.
3
Press the 4 button.
The preview image of the results of the filter effect appears.
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
5
Use the four-way controller (23) to select [Overwrite] or
[Save as].
6
Press the 4 button.
The image processed with the filter is saved.
5
Using the Ink Rubbing Filter
You can edit the image to look like an ink rubbing.
The Ink Rubbing Filter cannot be used on the following images.
• Movies or images taken in (Report) mode
• Images taken with the recorded pixels of , h, h, l, or m
• Images taken with other cameras
An error message appears in step 3.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to edit.
149
5
2
Use the four-way controller (2345) to select
Rubbing Filter) from the Playback Mode Palette.
3
Press the 4 button.
The preview image of the result of the filter effect appears.
4
Use the four-way controller (45) to choose the effect.
You can adjust the effect in five levels.
F Weak
G Standard
(Ink
H Strong
Cancel
5
Press the 4 button.
A confirmation dialog for overwriting the image appears.
OK
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
6
Use the four-way controller (23) to select [Overwrite] or
[Save as].
7
Press the 4 button.
The image processed with the filter is saved.
• The processed image is saved with the recorded pixels of f/ .
• When there is little contrast between the object and the background, the shape of the object may not be sharp depending on the conditions of the original image.
Creating a Collage Image
Make a collage image by placing captured images on a selected pattern.
The Collage function cannot be used on the following images.
• Movies or images taken in (Report) mode
• Images taken with the recorded pixels of
• Images taken with other cameras
, l, or m
1
Use the four-way controller (2345) to select (Collage) from the Playback Mode Palette.
150
2
Press the 4 button.
The item selection screen appears.
Recorded Pixels
Layout
Backgnd.
Select image(s)
Create an image
3
M
MENU
Selecting the Number of Recorded Pixels
3
Use the four-way controller (23) to choose the [Recorded
Pixels].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to choose the recorded pixels.
3
You can choose from h or h.
Recorded Pixels
Layout
Backgnd.
Select image(s)
M
Create an image
MENU Cancel OK OK
6
Press the 4 button.
Returns to the item selection screen.
Selecting the Layout Pattern
7
Use the four-way controller (23) to choose the [Layout].
8
Press the four-way controller
(5).
3
A pull-down menu appears.
Recorded Pixels
Layout
Backgnd.
Select image(s)
M
Create an image
MENU Cancel OK OK
9
Use the four-way controller (23) to choose the pattern of layout.
You can choose from 3 patterns of layout ( / / ).
10
Press the 4 button.
Returns to the item selection screen.
5
151
Selecting the Background
11
Use the four-way controller (23) to choose [Backgnd.].
12
Press the four-way controller (5).
A pull-down menu appears.
13
Use the four-way controller (23) to choose the background.
You can choose the white background or the black background.
Recorded Pixels
Layout
Backgnd.
Select image(s)
3
M
Create an image
MENU Cancel OK OK
14
Press the 4 button.
Returns to the item selection screen.
5 Laying Out the Images
• The following images cannot be used in a collage image, and they do not appear as available images.
-Movies or images taken in (Report) mode
-Images taken with the recorded pixels of , l, or m
-Images taken with other cameras
• If you select an image with a 16:9 aspect ratio, the black areas appear above and below the image.
15
Use the four-way controller (23) to choose [Select image(s)].
16
Press the four-way controller (5).
The available images appear.
17
Use the four-way controller (45) to choose the image to be placed
and press the 4 button.
The selected image is placed in the highlighted area in the guide. The guide appears on the top left of the display.
OK
18
Repeat step 17 to lay out the rest images.
152
19
Press the 9 button.
Returns to the item selection screen.
Saving the Edited Image
20
Use the four-way controller (23) to select [Create an image].
Recorded Pixels
Layout
Backgnd.
Select image(s)
Create an image
MENU
21
Press the 4 button.
A confirmation dialog for saving the image appears.
22
Use the four-way controller (2) to select [Save].
23
Press the 4 button.
The edited image is saved.
The quality level of the image is fixed at C (Best).
3 M
OK OK
5
Red-eye Edit
You can correct images where the flash has caused the subject to appear with red eyes.
• The Red-eye Edit function cannot be used on movies or on images where red eyes cannot be detected on the camera. An error message appears in step 3.
• The Red-eye Edit function can only be used with still pictures taken with this camera.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to edit.
2
Use the four-way controller (2345) to select Z (Red-eye
Edit) from the Playback Mode Palette.
3
Press the 4 button.
153
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the confirmation dialog does not appear.
4
Use the four-way controller (23) to select [Overwrite] or
[Save as].
5
Press the 4 button.
The edited image is saved.
5
Overlaying Your Original Frame on Still Pictures
You can overlay your original frame (decorative frame) on still pictures. You can select the type and color of an original frame and its position. Text can also be entered.
Frame
Type of original frame
Blur/Edge Composite
Frame Type
Color
F (All sides)/G (Upper and lower sides)/H (Right and left sides)/
I (Upper side)/J (Lower side)/K (Left side)/L (Right side)
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Text Stamp
Available characters
A – Z, a – z, 0 – 9, Symbols, Space
Display Position
Color
M (Upper-left)/N (Upper-center)/O (Upper-right)/P (Lower-left)/
Q (Lower-center)/R (Lower-right)
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
The Original Frame function cannot be used on images taken in (Report) mode, images taken with the recorded pixels of /h/h/l/m or movies. An error message appears in step 3.
154
1
Enter Q mode and use the four-way controller (45) to choose the image to which you want to add a frame.
2
Use the four-way controller (2345) to select E (Original
Frame) from the Playback Mode Palette.
3
Press the 4 button.
The original frame type selecting screen appears.
4
Use the four-way controller (23) to select an original frame type,
and press the 4 button.
The frame setting screen appears.
Blur
5
Use the four-way controller (23) to select [Frame Type], and press
the four-way controller (5).
Frame Type
Color
Text Stamp
Position Adjustment
Cancel Save
6
Use the four-way controller (23) to select a frame type, and
press the four-way controller (4).
7
Set [Color] in the same way as in steps 5 and 6.
8
Adjust the position of the frame and image.
For details, refer to “To Adjust the Position of the Frame and Image” (p.156).
9
Use the four-way controller (23) to select [Text Stamp], and
press the four-way controller (5).
The [Text Stamp] screen appears.
When you do not want to enter characters, proceed to step 11.
10
Set up the text stamp.
For details, refer to “To Set Up Text Stamp”
Text Stamp
0
A B
1
#
2
C
+
D
3
=
4
E
5
F
$
G
6
%
7
H I
8 9
J
{
.
K
}
,
L M
(
N
)
O
[
P
] <
Q R
>
S
@
TUV
/
W
: ;
X
Finish
!
Y
?
Z
A/a
5
MENU
Delete One Character
Cancel OK Enter
155
11
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
12 and the confirmation dialog does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
13
Press the 4 button.
The edited image is saved with the recorded pixels of f/ .
5
To Adjust the Position of the Frame and Image
1
Press the Green button.
The frame position adjustment screen appears.
Four-way controller
(2345)
Zoom button right
(y)
Zoom button left
(f)
Press to adjust the position of the frame
Press to make the frame larger
Press to make the frame smaller
2
Press the Green button.
The image position adjustment screen appears.
Four-way controller
(2345)
Zoom button right
(y)
Zoom button left
(f)
Press to adjust the position of the image
Press to make the image larger
Press to make the image smaller
3
Press the 4 button.
The screen returns to the original screen.
//
//
156
To Set Up Text Stamp
1
Use the four-way controller
(2345) to select a character
and press the 4 button.
The selected character is input.
Up to 52 characters can be input.
Text Stamp
0
A B
1
#
2
C
+
D
3
=
4
E
5
F
$
G
6
%
7
H I
8 9
J
{
.
K
}
,
L M
(
N
)
O
[
P
] <
Q R
>
S
@
TUV
/
W
: ;
X
Finish
!
Y
?
Z
FR I ENDS
A/a
Movie button
Zoom button right
(y)
Zoom button left
(f) i button
Press to switch between upper and lower cases
Press to move the cursor to the right
Press to move the cursor to the left
Press to delete a character
MENU
Delete One Character
Cancel OK OK
2
Use the four-way controller (2345) to select [Finish] and
press the 4 button.
3
Use the four-way controller (23) to select [Display Position] and
Enter on this condition
press the four-way controller (5).
Display Position
Color
Preview
Cancel
4
Use the four-way controller (23) to select the display
position and press the four-way controller (4).
5
Use the four-way controller (23) to select [Color] and press
the four-way controller (5).
6
Use the four-way controller (23) to select the color and
press the four-way controller (4).
5
157
To View the Preview Screen
1
Press the Green button.
The preview screen appears.
2
Press the 3 button.
The screen returns to the original screen.
3
Press the 4 button.
5
Editing Movies
You can extract a frame from a movie to save as a still picture, divide a movie into two, or add a title picture to a movie.
1
Enter Q mode and use the four-way controller (45) to choose the movie you want to edit.
2
Use the four-way controller (2345) to select [ (Movie
Edit) from the Playback Mode Palette.
3
Press the 4 button.
The edit option selection screen appears.
Save as Still Image
158
To Save a Frame from a Movie as a Still Picture
4
Select [Save as Still Image] on the edit option selection screen.
5
Press the 4 button.
The screen for selecting a frame to be saved as a still picture appears.
6
Use the four-way controller
(2345) to choose the frame you want to save.
2
3
4
Plays back or pauses the movie
Stops the movie and returns to the first frame
Reverses the movie frame by frame
5 Advances the movie frame by frame
7
Press the 4 button.
The selected frame is saved as a still picture.
Select the image to save
0042
00:06
11
To Divide a Movie
4
Select [Divide Movies] on the edit option selection screen.
5
Press the 4 button.
The screen for choosing a dividing position appears.
6
Use the four-way controller
(2345) to specify the dividing position.
Select image for dividing position
2
3
Plays back or pauses the movie
Stops the movie and returns to the first frame
4 Reverses the movie frame by frame
5 Advances the movie frame by frame
7
Press the 4 button.
A confirmation dialog appears.
8
Use the four-way controller (2) to select [Divide].
0042
00:09
5
Divide
Cancel
159
9
Press the 4 button.
The movie is divided at the specified position, each segment is saved as a new file, and the original movie is deleted.
The protected movies cannot be divided.
• Only a movie for more than 2 seconds (31 frames) can be divided.
• For dividing, every 30 frames (31st, 61st, 91st.. frames) can be selected.
5
To Add a Title Picture to a Movie
4
Select [Adding title picture] on the edit option selection screen.
5
Press the 4 button.
The screen for selecting a title picture appears.
6
Use the four-way controller (45) to choose the desired title picture.
Only images available for the title picture are displayed.
7
Press the 4 button.
The screen for confirming the position of the title picture appears.
8
Use the four-way controller (23) to select the position.
A Adds the title picture to the
Specify the position of title picture to add beginning of the movie
B Adds the title picture to the end of the movie
Cancel
9
Press the 4 button.
The selected picture is saved as the title picture.
• A title picture cannot be added to protected movies.
• If a movie is more than 26 minutes long after adding title pictures, you cannot add any more title pictures to it.
160
• When a title picture is added to the beginning of a movie: When the movie is played back, the added still picture is played back for three seconds, and then the movie is played back. The added still picture is used as the thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is played back, the movie is played back, and then the added still picture is played back for three seconds. The thumbnail of the movie is not changed by adding a title picture to the end of the movie.
• Only a still picture with the same aspect ratio as the movie can be set as a title picture.
Copying Images
You can copy images from the built-in memory to the SD Memory Card and vice versa. This function can only be selected when an SD Memory Card is inserted in the camera.
Make sure that the camera is turned off before inserting or removing the SD
Memory Card.
1
Use the four-way controller (2345) to select p (Image
Copy) from the Playback Mode Palette.
2
Press the 4 button.
The copying method selection screen appears.
5
To Copy Files from the Built-in Memory to the SD Memory Card
All the images in the built-in memory are copied to the SD Memory Card at once.
Before copying the images, make sure that there is enough space on the SD
Memory Card.
3
Use the four-way controller (2) to
select [2}{].
SD
4
Press the 4 button.
All the images are copied to the SD Memory Card.
161
To Copy Files from the SD Memory Card to the Built-in Memory
The image selected from the SD Memory Card is copied to the built-in memory.
3
Use the four-way controller (23) to select [{}2].
4
Press the 4 button.
5
Use the four-way controller (45) to select the image you want to copy.
Copies this image to alternate memory
5
6
Press the 4 button.
The selected image is copied to the built-in memory.
To copy other images, repeat steps 3 to 6. Select [Cancel] to exit the copy operation.
When an image is copied from the SD Memory Card to the built-in memory, a new file name is assigned to the copied image.
162
Printing Settings
You can print pictures taken with the camera in the following ways.
1 Go to a photo processing lab.
2 Use a printer that has an SD Memory Card slot to print directly from the SD
Memory Card.
3 Use the software that is available on your computer to print images.
Setting the Printing Service (DPOF)
DPOF (Digital Print Order Format) is the format for storing print order data on still pictures captured with a digital camera. Once the print order data has been stored, the pictures can be printed according to the DPOF settings using a DPOFcompatible printer or at a photo processing lab.
DPOF cannot be set for movies.
If the picture already has the date and/or time imprinted on it (p.106), do not
set [Date] to O (On) in DPOF setting. If you select O, the imprinted date and/ or time may overlap.
5
Printing a Single Image
Set the following items for each image.
Copies For setting the number of prints. You can print up to 99 copies.
Date Specify whether you want the date inserted on the print or not.
1
Use the four-way controller (2345) to select r (DPOF) from the Playback Mode Palette.
2
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
163
3
Use the four-way controller (23) to select [Single Image].
5
4
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
To make DPOF settings for another image, use the four-way controller (45) to select another image.
If the selected image already has the DPOF settings, the number of copies and date setting (O (On) or P (Off)) that have been previously set will be displayed.
5
Use the four-way controller (23) to choose the number of copies.
Applies DPOF settings to this image
Copies
Date
00
7
6
Use the Green button to choose whether to imprint the date or not.
O (On) The date will be imprinted.
P (Off) The date will not be imprinted.
To continue setting DPOF print order data, use the four-way controller (45) to choose another image and repeat steps 5 and 6.
Date
Cancel
Applies DPOF settings to this image
Date
Cancel
Copies
Date
Press the 4 button.
The settings are saved and the screen shown in step 3 reappears.
01
Depending on a printer or printing equipment at the photo processing lab, the date may not be imprinted on the pictures even if O (On) is selected for the
Date setting.
To cancel DPOF settings, set the number of copies to [00] in step 5 and press the 4 button.
164
Printing All Images
DPOF settings are applied to all the images stored in the camera.
1
Select [All Images] in step 3 on p.164.
2
Press the 4 button.
The message [Applies DPOF settings to all images] appears.
3
Choose the number of copies and whether to imprint the date or not.
Refer to steps 5 and 6 in “Printing a Single
Applies DPOF settings to all images
Image” (p.164) for details on how to make
the settings.
Copies
Date
01
Date
Cancel
4
Press the 4 button.
The settings for all the images are saved and the camera returns to the initial screen of the DPOF setting.
• The number of copies specified in the [All Images] settings applies to all the images. Before printing, check that the number is correct.
• The DPOF settings made with [Single Image] are canceled when the settings are made with [All Images].
5
165
Camera Settings
Using the Setting Menu Items
Settings for the camera are set from the [W Setting] menu. Refer to explanations
1 for each function on how to make these settings.
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller
(5).
2
Use the four-way controller (2345) to select an item and set it up.
3
After finishing the settings, press the 3 button.
The setting is saved and the camera returns to the previous screen.
6
To Save the Setting and Start Taking Pictures
3
Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
When the [W Setting] menu is displayed from Q mode, you can switch to A mode by pressing the Q button.
3
To Cancel the Changes and Continue with Menu Operations
Press the 3 button before you finish the settings.
The changes are canceled and you can select a menu.
The 3 button function varies depending on the screen. Refer to the guide indications.
MENU Exit
MENU
MENU
Exits the menu and returns to the original screen.
Returns to the previous screen with the current settings.
Cancel Cancels the current selection, exits the menu and returns to the previous screen.
166
6Settings
Formatting the Memory
Formatting deletes all the data on the SD Memory Card or in the built-in memory.
Be sure to use this camera to format (initialize) an SD Memory Card that is unused or has been previously used on other cameras or digital devices.
• Do not remove the SD Memory Card while it is being formatted. This may damage the card and make it unusable.
• Formatting deletes protected images and any data recorded on the card with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this camera cannot be used. Be sure to format the card with the camera.
• To format the built-in memory, be sure to eject the SD Memory Card beforehand. Otherwise, the SD Memory Card will be formatted.
1
Use the four-way controller (23) to select [Format] in the
[W Setting] menu.
2
Press the four-way controller (5).
The [Format] screen appears.
3
Use the four-way controller (2) to select [Format].
Format
All data will be deleted
Format
Cancel
OK
4
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode or Q mode.
OK
6
167
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of sound.
1
Use the four-way controller (23) to select [Sound] in the
[W Setting] menu.
2
Press the four-way controller
(5).
Sound
Operation Volume
The [Sound] screen appears.
Playback Volume
Startup Sound
Shutter Sound
Operation Sound
Self-timer Sound
Off
1
1
1
MENU
6
To Change the Operation Volume/Playback Volume
3
Use the four-way controller (23) to select [Operation
Volume].
4
Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound, operation sound, and self-timer sound.
5
Change [Playback Volume] in the same way as in steps 3 and
4.
To Change the Sound Type
3
Use the four-way controller (23) to select [Startup Sound].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to select the sound type.
Choose from [1], [2], [3], [4], or [Off].
6
Press the 4 button.
7
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in steps 3 to 6.
168
Changing the Date and Time
You can change the initial date and time settings (p.46), and the style in which the
date appears on the display.
1
Use the four-way controller (23) to select [Date Adjustment]
in the [W Setting] menu.
2
Press the four-way controller (5).
The [Date Adjustment] screen appears.
Date Adjustment
Date Format mm/dd/yy 24h
Date 01/01/2014
Time 00:00
Settings complete
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting, [dd/mm/yy] or [yy/mm/dd] may be displayed.
4
Use the four-way controller (23) to choose the date and time display style.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
5
Press the four-way controller (5).
The frame moves to [24h].
6
Use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display).
7
Press the four-way controller (5).
The frame returns to [Date Format].
8
Press the four-way controller (3).
The frame moves to [Date].
9
Press the four-way controller (5).
The frame moves to one of the following items depending on the date style set in step 4.
Month for [mm/dd/yy]
Day for [dd/mm/yy]
Year for [yy/mm/dd]
The following operations use [mm/dd/yy] as an example. The operations are the same even if another date style has been selected.
6
169
10
Use the four-way controller (23) to change the month.
11
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to change the day. After changing the day, change the year in the same manner.
12
Change the time in the same way as in steps 7 to 11.
If you selected [12h] in step 6, the camera switches between am and pm
13 corresponding to the time.
Press the four-way controller (3) to select [Settings complete].
14
Press the 4 button.
The date and time settings are saved and the screen returns to the [W Setting] menu.
When you press the 4 button in step 14, the camera clock is reset to 0 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 0 seconds.
6
Setting the Alarm
You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day or only once at the set time.
Setting the Alarm
1
Use the four-way controller (23) to select [Alarm] in the
[W Setting] menu.
2
Press the four-way controller
(5).
Alarm 14:14
Alarm Off
The [Alarm] screen appears.
Time 00:00
MENU Cancel
Settings complete
3
Press the four-way controller (5).
A pull-down menu appears.
170
4
Use the four-way controller (23) to select the alarm.
Choose from [Off], [Once], or [Everyday].
5
Press the 4 button.
6
Press the four-way controller (3).
The frame moves to the [Time] field.
7
Press the four-way controller (5).
The frame moves to the hour field.
8
Use the four-way controller (23) to change the hours, then
press (5).
The frame moves to the minute field.
Change the minutes in the same manner.
9
Press the 4 button.
10
Press the four-way controller (3).
The frame moves to [Settings complete].
11
Press the 4 button.
When the alarm is set to [Off], the settings are saved and the screen returns to the [W
Setting] menu.
When the alarm is set to [Once] or
Setting
Save as USER
Sound
Date Adjustment
Alarm
World Time
Text Size
1 / 5
01/01/2014
Standard [Everyday], [Alarm is set] is displayed and the power turns off.
MENU Exit
6
Checking the Alarm
1
Use the four-way controller (23) to select [Alarm] in the
[W Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller
(5).
Alarm
Once
14:14
The [Alarm] screen appears.
Alarm
Time 14:25
Check the alarm frequency and time.
MENU Cancel
Settings complete
171
Turning the Alarm Off
The Clock Display appears and the alarm rings for one minute when the set time is reached while the camera is turned off.
You can stop the alarm by pressing any button on the camera while the alarm is ringing.
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, it will not ring when Interval Shot or Interval Movie is set.
Setting the World Time
the world time function, you can display the time in the city that you select as X
(Destination). This is useful when taking pictures in a different time zone.
6
To Set the Destination
1
Use the four-way controller (23) to select [World Time] in the
[W Setting] menu.
2
Press the four-way controller
(5).
World Time
Select Time
The [World Time] screen appears.
Destination
New York
DST
14:25
Hometown
New York
DST
14:25
MENU
3
Use the four-way controller (23) to select X (Destination).
4
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected blinks on the map.
172
5
Use the four-way controller (45) to change the Destination city.
The current time, location and time difference of the selected city appear.
Destination 14:25
City
DST
New York
TimeDif.
+0:00
MENU OK Cancel OK
7
6
Use the four-way controller (23) to select [DST].
Use the four-way controller (45) to select O (On) or P (Off).
Select O if the Destination city uses daylight saving time.
8
Press the 4 button.
The [World Time] setting is saved.
Select W (Hometown) in step 3 to set the city and DST setting for the
Hometown city.
To Display the Time of the Destination (Select Time)
1
Use the four-way controller (23) to select [World Time] in the
[W Setting] menu.
2
Press the four-way controller (5).
The [World Time] screen appears.
3
Use the four-way controller (23) to select [Select Time].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to select X (Destination) or
W (Hometown).
X Displays the time of the Destination city
W Displays the time of the Hometown city
6
Press the 4 button.
The setting is saved.
P
When X (Destination) is selected the X icon appears on the display to indicate that the date and time of the Destination city are displayed in A mode.
6
173
Setting the Text Size on the Menu
You can set the text size of the item with the selection frame on the menu to
[Standard] (normal display) or [Large] (magnified display).
1
Use the four-way controller (23) to select [Text Size] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the text size.
Setting 1 / 5
Select from [Standard] or [Large].
Save as USER
Sound
Date Adjustment
Alarm
World Time
01/01/2014
Standard
Large
Text Size
MENU Cancel OK OK
4
Press the 4 button.
The setting is saved.
6
Changing the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
1
Use the four-way controller (23) to select [Language/ ] in
the [W Setting] menu.
2
Press the four-way controller (5).
The [Language/ ] screen appears.
3
Use the four-way controller (2345) to select the desired language.
4
Press the 4 button.
The menus and messages are displayed in the selected language.
174
Changing the Naming System of the Folder
You can change the naming system of the folder for storing images. When the naming system is set to the [Date], images are saved in separate folders by the date they were taken.
Choice
Date
(Default)
RICOH
_USER
The name of the folder xxx_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date format is set to [dd/mm/yy]
A folder is made by day, and the images of the day are saved in the folder. xxxRICOH (xxx is the 3-digit folder number)
Up to 9999 images are saved in the same folder. xxxAAAAA (xxx is the automatically given 3-digit folder number, and
AAAAA is the 5-digit characters that you entered)
Up to 9999 images are saved in the same folder.
Image taken on April 1 with the folder name setting set to [Date] created.
A folder with the name
“100_0401” is created.
The images are saved in the “100_0401” folder.
Image taken on April 8 with the folder name setting set to [Date] created.
A folder with the name
“101_0408” is created.
The images are saved in the “101_0408” folder.
Image taken on April 10 with the folder name setting set to [RICOH] created.
A folder with the name
“102RICOH” is created.
The images are saved in the “102RICOH” folder.
Image taken on April 15 with the folder name setting set to [RICOH] created.
A new folder is not created.
The images are saved in the “102RICOH” folder.
DCIM DCIM
100
100_0401
100
100_0401
101
101_0408
• Up to 900 folders can be created.
• Up to 9999 images can be saved in a folder.
DCIM
100
100_0401
101
101_0408
102
102RICOH
DCIM
100
100_0401
101
101_0408
102
102RICOH
6
175
Selecting a Rule for Naming Folders
1
Use the four-way controller (23) to select [Folder Name] in
the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the rule for naming folders.
4
Press the 4 button.
The setting is saved.
6
Naming the Folder Yourself
You can name the folder in which to save images.
You can enter up to five single-byte alphanumeric characters.
The 5-digit name is displayed after the 3-digit folder number.
1
Select [_USER] in step 3 in “Selecting the Rule for Naming
Folders”.
2
Press the four-way controller
(5).
The [Folder Name] screen appears.
“_USER” has already been entered.
Folder Name
A
N O P Q R S T U V W X Y Z
0
B
1
C
2
D
3
E
4
F
5
G
6
H
7 8
I J
9
K L M
Settings complete
U S E R
MENU Cancel OK Enter
3
Use the four-way controller (2345) to select a character to
enter, and press the 4 button.
The first character is fixed and the cursor moves to the second character.
4
Repeat step 3 and enter the remaining characters.
176
5
Press the four-way controller (4) while “A” is selected, or press
(35) while “_” is selected.
The frame moves to [Settings complete].
Folder Name
A
N O P Q R S T U V W X Y Z
0
B
1
C
2
D
3
E
4
F
5
G
6
H
7 8
I J
9
K L M
Settings complete
P A R T Y
MENU Cancel
6
Press the 4 button twice.
The folder name is fixed, and returns to the [W Setting] menu.
OK OK
• You can move the cursor by pressing the zoom button.
• The folder name you have set is displayed in the [R Setting] menu.
Changing the Naming System of the File
You can change the naming system of the file.
Choice
RIMG
(Default)
USER
The name of the file
RIMGxxxx (xxxx is the automatically assigned 4-digit file number)
The file number follows the setting character which is specified to the camera.
AAAAxxxx (xxxx is the automatically assigned 4-digit file number)
The file number follows the name you have entered.
Selecting a Rule for Naming Files
1
Use the four-way controller (23) to select [File Name] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the rule for naming files.
4
Press the 4 button.
The setting is saved.
6
177
6
Naming the File Yourself
You can name the file of images that are captured.
You can enter up to four single-byte alphanumeric characters. The 4-digit name is displayed before the 4-digit file number.
1
Select [USER] in step 3 in “Selecting a Rule for Naming Files”.
2
Press the four-way controller (5).
The [File Name] screen appears.
“USER” has already been entered.
File Name
A B C D E F G H I J
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
K L M
U S E R
MENU Cancel Enter
3
Use the four-way controller (2345) to select a character to
enter, and press the 4 button.
The first character is fixed and the cursor moves to the second character.
4
Repeat step 3 and enter the remaining characters.
5
Press the four-way controller (4) while “A” is selected, or press
(35) while “_” is selected.
File Name
A
0
B
1
C
2
D
3
E
4
F
5
G
6
H
7 8
I J
9
Settings complete
K L M
The frame moves to [Settings complete].
A B C D
MENU Cancel OK
6
Press the 4 button twice.
The file name is fixed, and returns to the [W Setting] menu.
• You can move the cursor by pressing the zoom button.
• The file name you have set is not changed even if you reset the camera.
178
Changing the Video Output Format
When you connect the camera to an AV device, choose the appropriate video output format (NTSC or PAL) for taking and playing back images.
1
Use the four-way controller (23) to select [Video Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a video output format.
Choose the video output format to match the output format of the AV device.
4
Press the 4 button.
The setting is saved.
Depending on the country or region, images may fail to be played back if the video output format is set differently from the one in use there. If this happens, change the video output format setting.
Connecting the Camera to an AV Device 1p.141
Video Output Format by City 1p.218
6
179
6
Selecting the HDMI Output Format
When you connect the camera to an AV device with an HDMI cable, select an output resolution for playing back images. The default setting is [Auto].
1
Use the four-way controller (23) to select [HDMI Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select an output format.
Select an HDMI output format to match the output format of an AV device.
4
Press the 4 button.
The setting is saved.
The items on the pull-down menu vary depending on the selected video output format.
To change the setting, change the video output format before changing the
HDMI output format.
The table below shows the combinations of the video output format and HDMI output format.
HDMI output format
(resolution)
Video output format
NTSC PAL
Auto (The maximum resolution that both the
TV and camera support is automatically selected)
1080i (1920×1080i)
720p (1280×720p)
480p (720×480p) 576p (720×576p)
180
Setting the Eye-Fi Communication
You can automatically transfer images to a computer or other devices via a wireless LAN using a commercially available Eye-Fi card. For details on
transferring images, refer to “Transferring Images Using an Eye-Fi Card” (p.202).
The default setting is P (Off).
1
Use the four-way controller (23) to select [Eye-Fi] in the
[W Setting] menu.
2
Use the four-way controller (45) to select O (On) or P (Off).
O (On) Turns on communication using an Eye-Fi card
P (Off) Turns off communication using an Eye-Fi card
3
Press the 4 button.
The setting is saved.
To establish an Eye-Fi communication, you first have to specify a wireless
LAN access point and transfer destination on the Eye-Fi card. For details on how to set up the card, refer to the operating manual supplied with the Eye-
Fi card.
Adjusting the Brightness of the Display
You can adjust the brightness of the display to 7 levels.
1
Use the four-way controller (23) to select [Brightness Level]
in the [W Setting] menu.
2
Use the four-way controller (45) to adjust the brightness.
F Dark
G Normal
H Bright
6
181
6
Using the Power Saving Function
You can save the battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the Power Saving function has been activated, the display returns to the ordinary brightness if any button is pressed.
1
Use the four-way controller (23) to select [Power Saving] in
the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the time until the camera enters Power Saving mode.
Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].
4
Press the 4 button.
The setting is saved.
• Power Saving does not function in the following situations:
- While taking pictures in j (Continuous Shooting) and c (Burst
Shooting) modes
- In playback mode
- During movie recording
- While the camera is connected to a computer
- When using the AC adapter
- While a menu is being displayed
- In (Digital Microscope) mode
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
Using the Auto Power Off Function
You can set the camera to turn off automatically when no operation is performed for a fixed time.
1
Use the four-way controller (23) to select [Auto Power Off]
in the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
182
3
Use the four-way controller (23) to select the time until the camera turns off automatically.
Choose from [5min.], [3min.] or [Off].
4
Press the 4 button.
The setting is saved.
Auto Power Off does not function in the following situations:
• While taking pictures in j (Continuous Shooting) and c (Burst Shooting) modes
• While recording a movie
• During a slideshow or movie playback
• While the camera is connected to a computer
• While images are being transferred in Eye-Fi communication.
Setting the Quick Zoom Function
While playing back images in Q mode, you can set whether to use [Quick Zoom] to magnify the playback image up to 10× when pressing the y button once.
1
Use the four-way controller (23) to select [Quick Zoom] in
the [W Setting] menu.
2
Use the four-way controller (45) to switch between O (On) or
P (Off).
O (On) The Quick Zoom is available.
P (Off) The Quick Zoom is not available.
6
Setting the Guide Display
Set whether to display mode guides for the Capture Mode Palette and Playback
Mode Palette.
1
Use the four-way controller (23) to select [Guide Display] in
the [W Setting] menu.
2
Use the four-way controller (45) to switch between O (On) or
P (Off).
O (On) The mode guides are displayed.
P (Off) The mode guides are not displayed.
183
Perform Pixel Mapping
Pixel Mapping is the function for mapping out and correcting defective pixels in the image sensor. Run the Pixel Mapping function if image dots always seem to be defective in the same place.
6
• Pixel Mapping is only accessible from A mode. Pixel Mapping cannot be selected even if the [W Setting] menu is displayed by pressing the 3 button in Q mode.
• When executing Pixel Mapping from Q mode, press the Q button once to enter A mode. Then press the 3 button and the four-way controller
(5) to display the [W Setting] menu and select Pixel Mapping.
1
Use the four-way controller (23) to select [Pixel Mapping] in
the [W Setting] menu.
2
Press the four-way controller (5).
The [Pixel Mapping] screen appears.
3
Use the four-way controller (2) to select [Pixel Mapping].
Pixel Mapping
Checks the image sensor and corrects defective pixels
Pixel Mapping
Cancel
OK OK
4
Press the 4 button.
Defective pixels are mapped out and corrected.
When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] appears on the display. Use the AC adapter kit K-
AC117 (optional) or use a battery with ample capacity remaining.
184
Changing the Start-up Screen
You can choose the start-up screen displayed when the camera is turned on.
You can choose any of the following images as the start-up screen:
• Guide display start-up screen showing a guide for the shooting modes and buttons
• Pre-installed screen
• One of the captured images (compatible images only)
1
Use the four-way controller (2345) to select (Start-up
Screen) from the Playback Mode Palette.
2
Press the 4 button.
The image selection screen appears.
3
Use the four-way controller (45) to choose the image for the startup screen.
Only images available for the start-up screen are displayed. You can also choose the pre-installed screen or guide display start-up screen already stored in the camera.
4
Press the 4 button.
The setting is saved.
• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card or built-in memory is formatted. However the image is deleted if you change the start-up screen after deleting the recorded image or formatting the memory.
• The start-up screen is not displayed when set to [Off].
• The start-up screen is not displayed when you turn the camera on in playback mode.
• Movies cannot be used for the start-up screen.
6
185
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default Settings”
(p.212) for the reset settings.
1
Use the four-way controller (23) to select [Reset] in the
[W Setting] menu.
2
Press the four-way controller (5).
The [Reset] screen appears.
3
Use the four-way controller (2) to select [Reset].
Reset
Returns to default settings
Reset
Cancel
OK OK
4
Press the 4 button.
The settings return to the defaults.
6
Setting the Startup Shortcut
You can start-up a function by pressing a button other than the power button even when the camera is off.
Playback Mode
LED Lighting
Clock Display
When [Playback Mode] is on, you can turn on the camera in playback mode by pressing and holding down the Q button.
When [LED Lighting] is on, you can turn on the LED Macro
Lights by pressing and holding down the Green button.
When [Clock Display] is on, you can display the clock on the display by pressing and holding down the 4 button.
1
Use the four-way controller (23) to select [Startup Shortcut]
in the [W Setting] menu.
2
Press the four-way controller (5).
The [Startup Shortcut] screen appears.
186
3
Use the four-way controller (23) to select an item.
Startup Shortcut
Playback Mode
LED Lighting
Clock Display
MENU
4
Use the four-way controller (45) to switch between O (On)/
P (Off).
O (On) The startup shortcut is available.
P (Off) The startup shortcut is not available.
The default settings are all O (On).
Displaying the Clock Display
You can use the camera as a clock. With the camera turned off, press and hold down the 4 button to display the clock on the display.
1
Press and hold down the 4 button.
The camera turns on and the clock appears on the screen.
The camera turns off automatically after approximately 10 seconds.
Pressing the power button turns the camera off immediately.
Not to function the Clock Display by pressing 4 button, set [Clock Display]
to P (Off) in [Startup Shortcut] from the [W Setting] menu. (p.186)
6
187
Light up the LED Macro Lights
You can use the camera as a light. Pressing and holding down the Green button lights up the LED Macro Lights when the camera is turned off.
1
Press and hold down the Green button.
The LED Macro Lights turn on. The lights turn off automatically after the lapse of the time set in [Auto Power Off].
Pressing the power button turns the camera off immediately.
• Not to light up the LED Macro Lights by pressing the Green button, set [LED
Lighting] to P (Off) in [Startup Shortcut] of the [W Setting] menu (p.186).
• When [Auto Power Off] is set to [Off], the LED Macro Lights do not turn off automatically.
• Press the power button to turn off the LED Macro Lights.
6
Automatically Rotating Images during Playing
Back
Set whether or not to rotate images automatically when playing back images.
The default setting is O (On).
1
Use the four-way controller (23) to select [Auto Image
Rotation] in the [W Setting] menu.
2
Use the four-way controller (45)
to select O (On)/P (Off).
Setting
O (On)
P (Off)
Images are rotated automatically.
Images are not rotated
Reset
Delete All
Pixel Mapping
Startup Shortcut
Format
Auto Image Rotation
4 / 5 automatically.
MENU Exit The setting is saved.
188
Using the Pressure Sensor
You can measure the ambient air pressure and height of the current camera location by using the camera's pressure sensor.
The camera shows the measurements in the sub display when the power is off
(p.30). When the power is on, it appears in the main display (p.21).
Setting the Type of Information That Is Displayed (Display Options)
You can choose the type of information that appears on the sub-display. The subdisplay can be set to show the current time, the current time and air pressure, or the current time and height.
1
Use the four-way controller (23) to select [Pressure Sensor]
in the [W Setting] menu.
2
Press the four-way controller (5).
The [Pressure Sensor] screen appears.
3
Use the four-way controller (23) to select [Display Options].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to change the setting.
Pressure Sensor
Off: Displays current time only
Display Options Off
Pressure
Rel Height
Pressure: Displays current time + air pressure
Camera Location
Reset values
Rel* Height: Displays current time + height
* “Rel” means “relative”.
6
Press the 4 button.
The setting is saved.
• The height is calculated using the air pressure. However, the climate conditions may cause some discrepancies in the results of the calculation.
• Specify [Camera Location] when selecting [Pressure] or [Rel Height].
6
189
6
Specifying the Location where You Use the Camera
You need to select the location in which you use the camera when you select
[Pressure] or [Rel Height] for [Display Options], so that the camera calculates the height or water depth more accurately.
Before using the camera in the water, select [Underwater] before you go into the water.
1
Use the four-way controller (23) to select [Pressure Sensor]
in the [W Setting] menu.
2
Press the four-way controller (5).
The [Pressure Sensor] screen appears.
3
Use the four-way controller (23) to select [Camera Location].
4
Press the four-way controller (5).
5
Use the four-way controller (23) to change the setting.
Camera Location
Not underwater
Underwater
6
Press the 4 button.
If you selected [Not underwater]
Use the four-way controller (45) to select a digit, and use the four-way controller (23) to select the value.
Enter a height between -300 to 4000 meters.
After you enter the height, press the 4 button.
The setting is saved.
If you selected [Underwater]
The setting is saved.
Select [Reset values] on the [Pressure Sensor] screen to reset the height to its default.
190
7Connecting to a
C o m p u t e r
Connecting to a Computer
Setting the USB Connection Mode
Set the device to which the camera is connected with the USB cable.
Always set the USB Connection mode before connecting the camera to a computer. You cannot perform the following setting after the camera is connected to a computer with the USB cable.
1
Turn your camera on.
2
Use the four-way controller (23) to select [USB Connection]
in the [W Setting] menu.
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select [MSC].
5
Press the 4 button.
The setting is saved.
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the computer via USB as a memory device. Also indicates a standard for controlling
USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class, you can copy, read, and write files from a computer without installing a dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital cameras via
USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without installing a device driver.
7
Unless otherwise specified, select MSC when connecting the camera to a computer.
191
Connecting the Camera and a Computer
Connect the camera to a computer using the provided USB cable.
1
Turn the computer on.
2
Turn the camera off.
3
Connect the camera to the computer using the USB cable.
Connect the terminal of the USB cable with the arrow mark facing the battery.
The power lamp blinks when the camera is connected to the computer correctly.
7
4
Turn your camera on.
The power lamp stops blinking and remains lit when the camera is recognized by the computer.
If the battery runs out of power while images are being transferred to a computer, the image data may be lost or damaged. When connecting the camera to a computer, use of the AC adapter kit (K-AC117) (optional) is
For information on system requirements, refer to p.194.
192
Disconnecting the Camera from the Computer
When the camera is being used by an application such as MediaImpression, it cannot be disconnected until the application is closed.
Windows
1
Click the (Safely Remove Hardware) icon in the task bar located at the bottom-right corner of the desktop.
2
Click [Eject (the device connected)].
The message appears.
3
Disconnect the USB cable from the Windows PC and your camera.
Macintosh
1
Drag [NO NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name to the trash.
2
Disconnect the USB cable from the Macintosh and your camera.
The camera will automatically switch to playback mode when the USB cable is disconnected from the camera or the computer.
7
193
Using the Provided Software
The following software is included on the provided CD-ROM.
Image viewing/managing/editing software
“MediaImpression 3.6.2 LE” (for Windows)
“MediaImpression 2.2 LE” (for Macintosh)
Languages: English, French, German, Spanish, Portuguese, Italian, Dutch, Swedish,
Russian, Korean, Chinese (traditional and simplified), Japanese
You can edit movies when using the MediaImpression for Windows.
7
System Requirements
The following system requirements must be met for you to fully enjoy the images captured with the camera on a computer.
• Supported OS should be pre-installed in a computer and updated to the latest version.
• Working status is not guaranteed for all computers.
• System requirements mentioned here are the minimum for playing back or editing movies.
Windows ®
OS
CPU
Windows Vista
®
, Windows
®
7, Windows
®
8, Windows
®
8.1
Intel ® Pentium ® IV 1.6 GHz, AMD Athlon™ XP 1800+, or equivalent
(Intel
®
Core™ 2 Duo E6300, AMD Athlon™ 64 X2 5000+, or higher recommended)
512 MB (2GB or higher recommended) Memory
HDD volume 300 MB available hard disk space (1GB or higher recommended)
Graphics Intel ® GMA X3100/NVIDIA GeForce ® MX440/ATI Radeon™ 9200, with 128MB video memory, or equivalent
(Intel
®
GMA 4500HD/NVIDIA GeForce
®
8600GT/ATI Radeon™
HD 3800, with 256MB video memory, or higher recommended)
Monitor 1024 x 768 pixels, 16-bit color or higher
194
Macintosh
OS
CPU
Mac OS X 10.6, 10.7, 10.8
Power PC G4 800 MHz, or equivalent
(Intel ® Core™ 2 Duo, or higher recommended)
Memory 512 MB (1GB or higher recommended)
HDD volume 300 MB available hard disk space (1GB or higher recommended)
Graphics NVIDIA GeForce
®
FX 5200 Ultra with 64MB video memory, or equivalent
(Intel ® GMA 950/NVIDIA GeForce ® 7300GT/ATI Radeon™ X1600, with 128MB video memory, or higher recommended)
Monitor 1024 x 768 pixels, 16-bit color or higher
Installing the Software
Install the image viewing/managing/editing software “MediaImpression”.
• Make sure that the computer meets the system requirements before installing the software.
• When multiple accounts have been set up in the computer, log on with an account that has administrative rights before installing the software.
Windows
This section outlines installation steps on Windows 7 as an example.
1
Turn your Windows PC on.
2
Insert the provided CD-ROM into the CD/DVD drive.
If the installation screen appears, go to step 5.
7
195
3
Click [Computer] in the Start menu.
4
Double-click the CD/DVD drive icon.
The installation screen appears.
5
Click [MediaImpression 3.6.2 LE].
7
6
Choose a language in the “Choose Setup Language” screen and click [OK].
The setup screen appears. Follow the on-screen guidance and install the software.
7
Select the file format to use and click [Next].
All files in the checked format will open with
MediaImpression. Remove the check to open the file using another application.
8
Click [Finish].
Installation is complete.
196
9
Click [Exit] on the installation screen.
Remove the CD-ROM and reboot the computer.
Macintosh
1
Turn your Macintosh on.
2
Insert the provided CD-ROM into the CD/DVD drive.
3
Double-click the CD-ROM icon.
4
Double-click the [Software Installer] icon.
The installation screen appears.
5
Click [MediaImpression 2.2 LE].
The setup screen appears. Follow the onscreen guidance and install the software.
6
Click [Close].
Installation is complete.
7
Click [Exit] on the installation screen.
The window is closed.
7
197
Product Registration on the Internet
In order to better serve you, we request that you complete the product registration.
If the computer is connected to the Internet, please click [Product Registration] on the installation screen.
The world map screen shown on the right for
Internet Product Registration is displayed. Click the displayed country or region and then follow the instructions to register your product.
Only customers in countries and regions displayed on the software installation screen can register their products on the Internet Product Registration.
7
Using MediaImpression on Windows
1
Connect the camera to your Windows PC.
Refer to steps 2 to 4 on p.192 for details.
The [AutoPlay] screen appears.
2
Click [Import media files to local disk].
MediaImpression starts and the Import screen appears.
198
When the [AutoPlay] screen does not appear
1 Double-click the [MediaImpression 3.6.2 LE] icon on the desktop.
2 Click [PhotoImpression].
3 Click [Import].
3
Click the folder icon next to
[Destination Folder] and specify the destination location.
To transfer all images, proceed to step 5.
4
Select an image to transfer.
To select multiple images, choose the images while pressing the Ctrl key.
5
Click [Import].
A message appears when transfer is complete.
An arrow mark appears on the transferred images.
7
• You can find more information on how to use MediaImpression by using the help pages. Select [Help] in [Menu] at the top right of the screen.
• You cannot upload images to some SNS websites by using the software
“MediaImpression 3.6.2 LE”, which is included in the package.
199
Using MediaImpression on Macintosh
1
Connect the camera to your Macintosh.
Refer to steps 2 to 4 on p.192 for details.
2
Double-click the
[MediaImpression 2.2 LE] icon in the [Applications] folder.
MediaImpression 2.2 LE starts and the start page appears.
3
Click [Import].
The Import screen appears.
7
4
Select an image to transfer.
To select multiple images, choose the images while pressing the Command key.
To specify the destination location, click the folder icon.
If any of the “Import Options” are checked, marks will appear on the images that were transferred.
200
5
Click [Import].
When a message appears after transfer is complete, click [Done].
The images are transferred to the computer and the Media Browser screen appears.
• If the images from the camera are not displayed in the Import screen, select
[NO NAME] (or the volume label name) in [Get Media from].
• You can find more information on how to use MediaImpression by using the help pages. Select [ArcSoft MediaImpression Help] in [Help] on the menu bar.
• You cannot upload images to some SNS websites by using the software
“MediaImpression 2.2 LE”, which is included in the package.
7
201
7
Transferring Images Using an Eye-Fi
Card
You can transfer images to your computer or similar devices automatically when a built-in wireless LAN memory card (Eye-Fi card) is inserted in the camera.
1
Specify the wireless LAN access point and transfer destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual supplied with the Eye-Fi card.
2
Turn the camera off.
3
Insert the Eye-Fi card into the camera.
4
Turn the camera on.
5
Select O (On) for [Eye-Fi] in the [W Setting] menu.
The images are transferred automatically. For details on how to set up the
camera, refer to “Setting the Eye-Fi Communication” (p.181).
One of the following icons will appear on the display.
Communicating
When [Eye-Fi] is set to O and the camera is connected to an access point or is searching for an access point
Waiting for communication
When [Eye-Fi] is set to O and is not connected to an access point
Eye-Fi communication is not allowed
When [Eye-Fi] is set to P (Off)
Version error
When the version of the Eye-Fi card is out of date or the card is write-protected
• Endless Memory Mode is not supported.
• Update the Eye-Fi card firmware as necessary before using the card.
202
• When you intend to use a brand-new Eye-Fi card for the first time, copy the
Eye-Fi Manager installation file to your computer before formatting the card.
• Images are transferred via a wireless LAN. Set [Eye-Fi] to P (Off), or do not use an Eye-Fi card in locations where the use of wireless LAN devices is restricted or prohibited, such as on airplanes.
• If you insert an older version of Eye-Fi card in the camera, an error message appears.
• Images will not be transferred in the following situations:
- When available wireless LAN access points cannot be found
- When the battery level is low ( (yellow) or (red) is indicated)
• Transferring a large number of images may take a while. Use of the optional AC adapter kit (K-AC117) is recommended.
• Auto Power Off does not function while transferring images.
• The camera may be turned off automatically to protect the internal components when the inside of the camera reaches a high temperature caused by transferring a large file such as a movie.
• Use of a wireless access point, Internet and suitable Internet settings are required to transfer images via a wireless LAN. For more information, refer to the website (http://www.eye.fi/).
• For details on how to use an Eye-Fi card, refer to the operating manual supplied with the card.
• In case of malfunction of an Eye-Fi card, refer to the manufacturer of the card.
• The camera has the function of turning on or off the wireless communication of an Eye-Fi card. Please note, however, that not all Eye-
Fi card functions are guaranteed to operate.
• Use of an Eye-Fi card is permitted only in the country where the Eye-Fi card is purchased. Observe local and national regulations of the country where the card is to be used.
7
203
8
Functions Available for Each Shooting
Mode
√: Can be set. ×: Cannot be set.
Shooting Mode
Function
Zoom button Zoom operation
, Auto a Flash Off
Flash Mode
Drive Mode b Flash On c Auto + Red-eye d Flash On + Red-eye
9 Standard g Z Self-timer jc
Continuous Shooting/
Burst Shooting
Focus Mode hi Remote Control l Auto Bracketing
= Standard q Macro
1cm Macro
3 Pan Focus s Infinity z Manual Focus
b A b
√ *2
√
√
√
√
√
√
√
× √
√
√
√
√
√
√
√
√
√
√
×
√
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
√
√
√
√
√
√
⎯: Settings and changes are not applied.
√
×
√
×
×
×
√
√
×
√
×
√
√
√
√
√
√
A
√
√
×
√
×
√
√
√
×
×
×
√
×
√
×
×
×
√
√
√
√
√
√
√
√
×
×
×
√
√
√
√
√
√
C
√ *3
×
√
×
×
×
√
√
×
√
×
√
√
√
√
√
√
√ *3
×
√
×
×
×
√
√
×
√
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
8Appendix
204
√
√
√
√
√
√
√
√
√ c R
B
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√ a b
\ K
√
√
√
√
√
√
√
√
√
×
√
√
√
√
√
×
×
×
×
√
√
√
√
√
√ c
×
×
√
√
√
√
√
×
√ *38 √ *38 √ *38 √ *4
× × × ×
√
×
×
√
×
×
√
×
×
√
×
×
×
×
×
×
√
√
×
√
√
×
√
√
× × ×
√
√
√
√
√
√
√
×
×
√
√
√
√
√
√
√
×
×
×
×
√
×
√
×
×
√ *4
×
√
×
×
×
√
√
×
×
×
×
√
×
√
×
× c Q e S
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
√
×
×
×
√
√
×
×
×
√
×
×
×
√
×
9
√ *6
√
√
×
×
×
√
√
×
√
√
×
√
×
×
×
×
√
√
√
√
√
√
√
√
√
√ *5
√
√
√
√
√
√
√
8
205
8
√: Can be set. ×: Cannot be set. ⎯: Settings and changes are not applied.
Function
[A Rec.
Mode] menu
Shooting Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF
Setting
Auto Macro
Focus Assist
AE Metering
Sensitivity
AUTO ISO Range
EV Compensation
D-Range Setting
Shake Reduction
*1
Face Detection On
Face
Detection
Smile Capture
Self-portrait Assist /
Self-portrait Assist +
Smile Capture
Face Detection Off
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Sharpness/Saturation (Tone
Adjustment)/Contrast
Date Imprint
IQ Enhancer
Electronic Level
Macro Light
Lens Adapter On
*1 Movie SR is used for movies, while
Shake Reduction is used for still pictures.
*2 (Flower) cannot be detected when using digital zoom or Intelligent Zoom.
*3 Digital zoom is available. Optical zoom is available before shooting and also available during shooting if [Enable
Optical Zoom] is set to O (On).
Intelligent Zoom is not available.
*4 Only optical zoom and Intelligent Zoom are available, digital zoom is not available.
*5 Only optical zoom is available, digital zoom and Intelligent Zoom are not available.
b A b
√
√
√
√
√
A C
×
*8
√
√
× *19 √
×
*20 √
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*8
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√ ×
*8
×
*8
√ √ *10 √ √ *10
√ × *17 √ × *17
√ √ × *19 × *19
√ √ *21 √ √ *21
×
√
*7
√
√ ×
√
*7
× *23 √
√ √ ×
√
*24
×
√
*24
√
√ √
√
*13
×
×
*23
*24
× *23
√
×
×
*23
*24
√ √ ×
*26 √ *13 √ √ *13
×
*26 √ ×
*26
× *28 √ √ √ √ √ √ √ √
×
*7
√
√
√
√
√
√
√
√
√
√
×
*7
√
√
√
√
√
√ *9
√
√
√
√ √ *34 √ ×
*35 √
√
√
√
√
√
√
√
√
√
√
√ *30 √ *30 √ *30 √ *30 √ *30 √ *30
× √ *30
×
√
√
√
×
√
√
√
√
√ ×
√
*7
√
√
√
√ ×
√
*7
√
√ ×
√
*7
√ *37 √ *37 √ *37 √ √ *37 √ *37 √ √ *37 √
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
−
√
√
√
√
√
−
√
√
×
*29
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√ ×
*12
√ ×
*12
×
*7 √ √ √
√
√
√
√
√
√
√
√
√
√
√
√
*6 Only optical zoom and digital zoom are available, Intelligent Zoom is not available.
*7 Fixed to P (Off)
*8 Fixed at [Bright]
*9 Only Shadow Correction is available.
*10 Set in [C Movie] menu
*11 Fixed to h
*12 Fixed to [Off]
*13 The maximum sensitivity is 1600.
*14 Fixed to h/h
*15 Fixed to V
*16 Fixed to
√ √ ×
*29
×
*29
206
a b
\ K
×
*8
√
√
× *19
√
√
√
× *23
√
√
√
√
√
√
√ c R
B
×
*8
√
√
× *19
√
√
√
× *23
√
√
√
√
√
√
√
√
√
√
√
√
×
*7
√
√
√
√
√
√
√
√
× c c Q e S
√ √ √ √ √
×
×
*17
×
*32
×
*33
×
*11 √ *10
× *17 × *17 √ × *17
√ √ √
√ *21 √ *21 √ *21
√
√
√
√ *21
√
√
×
×
√
*7
*23 ×
×
√
*7
*23 ×
×
√
*7
*23
×
√
√ ×
×
√
*23
√
√
√
×
*24
×
*24
×
*24 √ *13
×
*24
×
*24
×
*26
×
*26
×
*26 √ *13
×
*26
×
*27
√ √ √ √ √ √
√
×
*7
√
×
√
×
*7
√
√
√
√
√
√
√
√
×
×
√
√
×
×
√
√
√
√
√
*34
√
√
9
√
√
√
√
√
√
√
×
*8
√
√
×
*8
√
√
×
*8
√
√
×
√
*15
√
×
×
×
*8
*16
*18
× *19 × *19 × *19 × *19 × *19
√
√
√
√
√
√
×
*20
×
×
√
√
√
×
×
×
*20
*22
*22
× *23 × *23 × *23 × *23 × *23
√
×
√
√
√
√
√
×
*25
−
√
√
×
√
*27
√
√
×
×
×
×
*24
*26
*28
*39
√ *34 √ *34
×
*36
√
√
√
√
√
×
√ *30 √ *30 √ *31 √ *31
× × × × √ *30 √ *30
× √ *30
× ×
√
×
√
√
*37
√
√
√
*29
×
×
√
√ *37
√
√
√
*29
√ *37
√
√
√
√
√
√
√
× *7
√
−
√
√
√
√
× *7
√
−
√
√
√
√
× *7
√
−
√
√
√
√
× *7
×
*7
√
√
√
√
√
× *7
√
−
√
√
√
√
√
√
√
√
√
√
×
√
√
√
√ *37 √ *37 √ *37
×
√
√
√
√
√
*29
×
√
√
√
*29
×
√
√
√
*29
×
√
√
×
*7
×
*22
√
√
√
*29
×
×
×
×
*22
*22
−
×
*29
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*12
√
√
√
√
×
*12
√
√
√
√
×
*12
√
√
√
√
*17 Fixed to C (Best) equivalent
*18 Fixed to D (Better)
*19 Fixed to F
*20 Fixed to J (Multiple)
*21 W (Automatic Tracking) is not available
*22 Fixed to O (On)
*23 Fixed to L (Multi-segment metering)
*24 Fixed to [AUTO]
*25 The sensitivity is fixed at its minimum value
*26 Fixed at 125-1600
*27 Fixed at 125-6400
*28 Fixed at ±0.0
*29 Fixed at normal level
√
√
√
×
*12
√
√
×
*22
×
*22
×
*7
×
*7
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
×
×
×
×
*7
*22
*7
*7
*7
*30 Not available when [Macro Light] is O (On)
*31 Only (Self-portrait Assist) is available.
*32 Fixed to 1280×720
*33 Fixed to 640×360
*34 [Dual] cannot be selected.
*35 Fixed to [Dual]
*36 Fixed to [Sensor Shift]
*37 Fixed to P (Off) when the sensitivity is fixed to 3200 or 6400
*38 Optical zoom and digital zoom are available before shooting. Intelligent Zoom is not available.
*39 Fixed to [Auto]
8
207
Messages
8
Messages such as the following may appear on the display during camera operation.
Available memory on card is insufficient to copy the images
Image folder cannot be created
Message
Battery depleted
Memory card full
Memory card error
The built-in memory is not formatted
Card is not formatted
Card is locked
Compression error
No image
Movie recording stopped
Deleting
Unable to play back this image
Protected
Description
The battery is exhausted. Charge the battery using the
The SD Memory Card is full and no more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
Change the recorded pixels or quality level of recorded
Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to display or copy the images on the card using a computer.
The data in the built-in memory are damaged. Format the built-in memory.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is not compatible with this camera. Format the SD Memory
The SD Memory Card is write-protected (p.7).
This message occurs when the camera fails to compress an image. Change the quality level or recorded pixels of the image and try shooting or saving it again.
There are no image on the SD Memory Card or in the builtin memory.
This message appears when the internal temperature of the camera has exceeded normal operating limits while recording a movie.
This message appears when deleting an image.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an image in the largest folder number (999) and no more images can be saved. Insert a new SD Memory Card or
format the card/built-in memory (p.167).
The image you are trying to delete is protected.
208
Message
Data being recorded
Data being processed
Description
Displayed when you try to switch to Q mode while an image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Built-in memory full
No image to be processed
This image cannot be processed
Displayed when there are no images.
Displayed for files that cannot be processed.
No card in the camera
Displayed if no SD Memory Card is inserted when “Image
Copy” is selected from the Playback Mode Palette and the
OK button is pressed.
Available built-in memory is insufficient to copy the images
Cannot process correctly
Not enough battery power remaining to activate Pixel Mapping
No more images can be selected
The camera will turn off to prevent damage from overheating
Not enough battery power remaining to complete the requested operation
Displayed when there is insufficient built-in memory to perform copying.
Displayed when red-eye compensation processing fails.
Displayed when the battery is too low during Pixel Mapping.
Change the battery (p.32) or use the AC adapter kit
Displayed when you select more than the maximum number of images.
Appears when the temperature inside the camera exceeds the highest limit.
Displayed when the battery does not have enough power for GPS positioning, recording, saving, or discarding logs.
8
209
Troubleshooting
8
Problem
The camera will not turn on
No image appears on the display
The display is hard to see
The shutter will not release
The picture is dark when using the flash
Cause
The battery is not installed
The battery is installed incorrectly
Remedy
Check if a battery is installed. If not, install a battery.
Check orientation of the battery.
Reinsert the battery according to the
+ symbols in the battery
The battery is exhausted Charge the battery.
The camera is connected to a computer
The display is off when the camera is connected to a computer.
The camera is connected to a TV
The display is off when the camera is connected to a TV.
The display is set to off.
The brightness level of the display is set too dark
Power Saving function is on
The flash is charging
There is no available space on the SD Memory Card or in the built-in memory
Recording
The subject is too far away in a dark environment, such as a night scene
Press the 4 button to turn the display on.
Adjust the brightness level in
[Brightness Level] in the [W Setting]
When the Power Saving function is on, the display automatically darkens after a certain amount of time. Press a button to return to the normal brightness level.
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Pictures cannot be taken while the flash is charging. Wait until charging is finished.
Insert an SD Memory Card with available space or delete unwanted
Wait until recording is finished.
The picture becomes dark if the subject is too far away. Take pictures within the specified flash range.
210
Problem
The subject is not in focus
The flash does not discharge
Cause Remedy
The subject is difficult to focus on with autofocus
The subject is not in the focusing area
Lock the focus on an object the same distance away as the subject
(by pressing and holding the shutter release button halfway), then aim the camera at your subject and press the shutter release button fully
(p.63). Or set the focus manually
Locate the desired subject in the focus frame (focusing area) in the center of the display. If it is difficult to do so, first lock the focus on the desired subject (by pressing and holding the shutter release button halfway), and then move the camera to recompose.
The flash mode is set to a (Flash Off)
Set to , (Auto) or b (Flash On)
The drive mode is set to j (Continuous Shooting), c (Burst Shooting), or l (Auto Bracketing); the focus mode is set to s (Infinity); or the shooting mode is set to d (Movie),
(Underwater Movie),
S (Fireworks),
(Digital Microscope),
(Handheld Night
The flash does not discharge in these modes.
Snap), (Interval
Speed
Movie), c (Time-Lapse
Movie), or (1cm-Macro
Movie).
8
Very occasionally, static electricity may cause camera to malfunction. In this case, remove the battery and install it again. If the camera is then working properly, you can continue using the camera.
211
Default Settings
8
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
No turned off.
: The setting returns to the default setting when the camera is turned
*
— off.
: The last memory setting depends on the [Memory] setting (p.123).
: N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset function
No
—
: The setting is saved even after reset.
: N/A
[A Rec. Mode] Menu Items
Image Tone
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF
Setting
Auto Macro
Focus Assist
AE Metering
Sensitivity
AUTO ISO Range
EV Compensation
D-Range
Setting
Highlight Correction
Shadow Correction
Shake Reduction
Blink Detection
Item
Face Detection
Default Setting
(Shooting mode:A)
Last
Memory
Setting
Bright Yes
(4608×2592) Yes
D (Better)
F (Auto)
J (Multiple)
O (On)
O (On)
L (Multi-segment)
AUTO (125-1600)
125-1600
±0.0
Yes
*
Yes
Yes
Yes
*
*
*
*
Auto
Auto
Sensor Shift
Yes
Yes
Yes
I
(Face Detection On)
O (On)
*
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
212
Item
Digital Zoom
Instant Review
Face Detection
Flash Mode
Memory
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
Sensitivity
EV Compensation
AE Metering
Digital Zoom
DISPLAY
File No.
Green Button
Sharpness
Saturation
Tone Adjustment
Contrast
Date Imprint
IQ Enhancer
Macro Light
Electronic Level
Lens Adapter On
[C Movie] Menu Items
O (On)
O (On)
P (Off)
O (On)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
O (On)
P (Off)
O (On)
Green Mode
G (Normal)
G (Normal)
G (B&W)
G (Normal)
Off
O (On)
P (Off)
O (On)
P (Off)
Default Setting
(Shooting mode:A)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Last
Memory
Setting
*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
Item
Recorded Pixels
Movie SR
Wind Suppression
Enable Autofocus
Enable Optical Zoom
Default Setting
(1920×1080·30fps)
O (On)
P (Off)
P (Off)
P (Off)
Last
Memory
Setting
Yes
Yes
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Page
8
213
8
[W Setting] Menu Items
Save as E
Sound
Operation Volume
Playback Volume
Startup Sound
Shutter Sound
Operation Sound
Self-timer Sound
Date
Adjustment
Alarm
World
Time
Text Size
Language/
Item
Date Format (date)
Date Format (time)
Date
Time
Alarm
Time
Select Time
Destination (City)
Destination (DST)
Hometown (City)
Hometown (DST)
Folder Name
File Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Default Setting
Cancel
3
3
Off
1
1
1
According to initial setting
24h
01/01/2014
According to initial setting
Off
00:00
W
(Hometown)
According to initial setting
P (Off)
According to initial setting
P (Off)
Standard
According to initial setting
Date
RIMG
MSC
According to initial setting
Auto
P (Off)
G
(Normal)
5 sec.
3 min.
P (Off)
O (On)
Cancel
Last
Memory
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
⎯
No
No
No
No
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
⎯
No
No
No
No
No
No
Yes *1
Yes
Yes
214
Page
Delete All
Pixel Mapping
Playback Mode
Startup
Shortcut
LED Lighting
Clock Display
Format
Item
Auto Image Rotation
GPS On/Off
GPS
*2
Record log
GPS
Logging Save log data
Discard log data
GPS Time Sync
Electronic
Compass
*2
Calibration
Default Setting
Cancel
Cancel
O (On)
O (On)
O (On)
Cancel
On
Off
Logging
Interval: 15 sec.
Logging
Duration: 1 hr.
Save
Cancel
Off
⎯
Pressure
Sensor *2
Display Options
Camera
Location
Not underwater
Underwater
Off
0000 m
Reset values
⎯
⎯
*1 Except the folder name that you created
*2 RICOH WG-4 GPS only
Last
Memory
Setting
⎯
⎯
Yes
Yes
Yes
⎯
Yes
Yes
Yes
⎯
⎯
Yes
⎯
Yes
Yes
Yes
⎯
Reset
Setting
⎯
⎯
Yes
Yes
Yes
⎯
Yes
Yes
Yes
⎯
⎯
Yes
⎯
Yes
Yes
Yes
⎯
Playback Mode Palette Items
Item
Slideshow
Interval
Screen Effect
Sound Effect
Image Rotation
Small Face Filter
Ink Rubbing Filter
Default Setting
3 sec.
Wipe
O (On)
Normal
Approx. 7%
G (Standard)
Page
GPS Guide
GPS Guide
Last Memory
Setting
Yes
Yes
Yes
⎯
No
No
Reset
Setting Page
Yes
Yes
Yes
⎯
No
No
8
215
8
Item
Collage
Recorded Pixels
Layout
Background
Select image(s)
Digital Filter
HDR Filter
Original
Frame
Movie Edit
Blur
Edge Composite
Save as Still Image
Divide Movies
Adding title picture
Red-eye Edit
Recorded Pixels
Resize
Quality Level
Cropping
Image Copy
Protect
Single Image
All Images
DPOF
Single Image
All Images
Start-up Screen
Default Setting h
White
⎯
B&W/Sepia
⎯
All sides/White
All sides/White
⎯
⎯
⎯
⎯
Depending on the picture taken
Depending on the picture taken
Depending on the picture taken
Built-in memory →
SD Memory Card
Depending on the picture taken
Depending on the picture taken
Copies: 0
Date: P (Off)
Default
Last Memory
Setting
Yes
Yes
Yes
⎯
No
⎯
No
No
⎯
⎯
⎯
⎯
⎯
Reset
Setting
Yes
Page
Yes
Yes
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Yes
⎯
⎯
⎯
⎯
⎯
Yes
216
Button/Key Operation
Item
Q button
W/T button
Function
Operation Mode
Zoom Position
Default Setting
Q Mode
Full wide-angle
Last
Memory
Setting
⎯
*
Reset
Setting
⎯
No
Yes 2 Drive Mode 9 (Standard) *
Four-way controller
3 Shooting Mode b (Auto Picture) Yes
4 Flash Mode , (Auto) *
5 Focus Mode *
3 button Menu Display
= (Standard)
Still Picture
Capture Mode:
[A Rec. Mode] menu
Movie Mode:
[C Movie] menu
Playback Mode:
[W Setting] menu
⎯
4 button
Information
Display
Normal Display *
Green Button Function Recall Green Mode
Movie button Operation Mode Recording starts
Yes
⎯
Yes
Yes
Yes
⎯
Yes
Yes
⎯
Page
⎯
8
217
List of World Time Cities
8
City: indicates cities that can be set as either the Initial Setting (p.43) or the World
Video Output Format: indicates the video output format of the city set as the initial setting.
Region
North
America
Central and
South
America
Europe
Africa/West
Asia
City name
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Caracas
Athens
Helsinki
Moscow
Dakar
Algiers
Johannesburg
Video output format
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
Region
Africa/West
Asia
East Asia
Oceania
City name
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho Chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Video output format
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
218
Main Specifications
Type
Number of Effective
Pixels
Image Sensor
Number of Recorded
Pixels
Sensitivity
File Formats
Quality Level
Storage Media
Fully automatic compact digital camera with built-in zoom lens
Approx. 16 megapixels
1/2.3 inch CMOS
Still (4608×3456), (3456×3456),
(4608×2592), 6 (3072×2304),
(3072×1728), f (2592×1944),
(2592×1464), h (2048×1536), h (1920×1080), l (1024×768), m (640×480)
* Fixed at h in Digital Microscope mode.
* Fixed at f/
* Fixed at V (1280×960) in Report mode.
* Fixed at f/
in Burst Shooting mode.
in Original Frame mode.
Movie
JPEG (Exif 2.3), DCF 2.0, DPOF,
PRINT Image Matching III
(1280×720/60fps)
AUTO, Manual (ISO 125, 200, 400, 800, 1600, 3200, 6400)
* The sensitivity is fixed at AUTO (125-6400) in Digital SR mode.
Still
(1920×1080/30fps),
M (1280×720/30 fps)
Movie MPEG-4 AVC/H.264, approx. 60 fps/30 fps, stereo sound,
Movie SR (Movie Shake Reduction)
Still C (Best), D (Better), E (Good)
Movie Fixed at C (Best) *Unchangeable
Built-in memory (approx. 70 MB), SD Memory Card, SDHC Memory
Card, SDXC Memory Card
8
219
Approximate Image Storage Capacity and Recording Time
Still
C
Built-in Memory
D E
2 GB
SD Memory Card
C D E
(4608×3456)
(3456×3456)
(4608×2592)
6 (3072×2304)
(3072×1728) f (2592×1944)
(2592×1464) 37 71 101 1024 1921 2794 h (2048×1536) 44 87 128 1205 2364 3415 h (1920×1080)
V l
(1280×960) 101 186 263 2794 5122 6830
(1024×768)
64 117 172 1756 3235 4728
154 263 344 4098 6830 8782 m (640×480)
• The image storage capacity is for reference only. The actual image storage capacity may vary depending on the SD Memory Card and the subject.
• V (1280×960) can be set only when (Report) mode is set.
8
Movie
(1920×1080/30 fps)
(1280×720/60 fps)
M (1280×720/30 fps)
Built-in Memory
26 sec.
34 sec.
41 sec.
2 GB
SD Memory Card
16 min. 21 sec.
16 min. 29 sec.
26 min. 00 sec.
• The above figures are based on our standard shooting conditions and may vary depending on the subject, shooting conditions and type of the SD Memory Card used.
• The maximum length of continuous recording time for a movie is 25 minutes.
220
White Balance
Lens
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light (Daylight
Colors/Daylight White/White Light), Manual
Focal Length 4.5 - 18.0 mm
(approx. 25 - 100 mm in 35 mm format equivalent)
Maximum
Aperture
F2.0 (W) - F4.9 (T)
Lens Construction 9 elements in 7 groups (4 aspherical elements)
Zoom Type Electrically driven
Optical Zoom
Intelligent Zoom
4×
6 / : approx. 6×, f / :approx. 7.1×, h : approx. 9×, h: approx. 9.6×, l : approx. 18×, m : approx. 28.8× (when combined with optical zoom)
Digital Zoom Max. approx. 7.2× (combines with 4× optical zoom to give zoom magnification equivalent to 28.8×)
Motion Blur Reduction Still Sensor-Shift-Type (SR: Shake Reduction), Dual
(SR & Electronic Shake Reduction), Hi-sensitivity
Shake Reduction (Digital SR)
Display
Playback Modes
Focus Mode
Focus
Movie Electronic Movie Shake Reduction (Movie SR)
3.0 inch wide-LCD, Wide viewing angle, approx. 460,000 dots (AR coating (cover only))
Single-frame, 6-frame, 12-frame, Magnified view (max. 10×, scrollable), Folder Display, Calendar Display, Histogram Display,
Highlight/Shadow Area Alert, Select & Delete, Slideshow, Resize,
Cropping, Image Copy, Image Rotation, Digital Filter, HDR Filter,
Original Frame, Ink Rubbing Filter, Collage, Small Face Filter, Movie
Playback/Edit (Save as Still image, Divide, Adding title picture), Redeye Edit, Protect, DPOF, Start-up Screen
Autofocus, Macro, 1cm Macro, Pan Focus, Infinity, Manual Focus
Exposure Control
Type
Focus Range
(From lens face)
TTL contrast detection system by sensor
Multiple (9-point autofocus)/spot/automatic tracking changeable
Standard : 0.4 m - ∞ (Entire zoom range)
Macro : 0.1 m - 0.5 m (Entire zoom range)
1cm Macro : 0.01 m - 0.3 m (Mid-zoom to telephoto)
* It is possible to switch to Infinity, Pan Focus and
Manual Focus.
* Face Detection AF is available only when the camera recognizes the subject’s face.
Focus Lock
AE Metering
By half-pressing the shutter release button
Multi-segment metering, Center-weighted metering, Spot AE metering
EV Compensation ±2 EV (can be set in 1/3 EV steps)
8
221
8
222
Face Detection
Pet Detection
Shooting Mode
Digital Filter
Movie
Shutter Speed
Built-in Flash
Drive Mode
Self-timer
Time Function
Power Source
Battery Life
Interfaces
Detection of up to 32 people’s faces (up to 31 face detection frames on the display), Smile Capture, Blink Detection, Self-portrait Assist,
Self-portrait Assist + Smile Capture
* Face Detection AE is available only when the camera detects the subject’s face.
Detectable number of pets: 1
Auto Picture, Program, Shutter Priority, USER, HDR, Handheld Night
Snap, Movie, Underwater, Underwater Movie, Digital Microscope,
Landscape, Flower, Portrait, Interval Shot, Interval Movie, High Speed
Movie, Time-Lapse Movie, 1cm-Macro Movie, Digital SR, Surf &
Snow, Kids, Pet, Sport, Night Scene, Night Scene Portrait, Fireworks,
Food, Report, Green
B&W/Sepia, Toy Camera, Retro, Color (red, pink, purple, blue, green, yellow), Extract Color (red, green, blue), Color Emphasis (Sky Blue,
Fresh Green, Delicate Pink, Autumn Leaves), High Contrast,
Starburst (Cross, Heart, Star), Soft, Fish-eye, Brightness, Miniature
Continuous
Recording Time
Approx. 1 second - 25 minutes (however, only until the built-in memory or SD Memory Card is full)
1/4000 sec. - 1/4 sec. (mechanical and electronic shutters),1/2000 sec. - 4 sec. (Shutter Priority or Night Scene mode)
Modes
Flash Range
Auto, Flash Off, Flash On, Auto + Red-eye, Flash
On + Red-eye
Wide-angle: approx. 0.2 - 10.4 m
(approx. 0.66 - 34 ft.) (Sensitivity: AUTO)
Telephoto: approx. 0.2 - 4.2 m
(approx. 0.66 - 14 ft.) (Sensitivity: AUTO)
Single-frame, Self-timer (10 sec., 2 sec.), Continuous Shooting, Burst
Shooting, Remote Control (0 sec., 3 sec.), Auto Bracketing
Electronic control type, control time: Approx. 10 sec., 2 sec.
World Time 75 cities (28 time zones)
Clock Display
Alarm
Clock Display by holding down 4 button while camera is turned off (for approx. 10 sec.)
Alarm with simultaneous display of the Clock
Display at specified time
Rechargeable lithium-ion battery D-LI92, AC adapter kit (optional)
Image Storage
Capacity
Approx. 240 pictures
* Recording capacity shows the approximate number of shots recorded during CIPA-compliant testing (at 23°C (73.4°F) with display on and flash used for 50% of the shots). Actual performance may vary according to operating conditions.
* According to the results of in-house testing.
Playback Time
Approx. 200 min.
Movie Recording
Time
Approx. 65 min.
* According to the results of in-house testing.
USB 2.0 (high-speed compatible) /USB/AV terminal /
HDMI terminal (Type D (Micro))
Video Output Format NTSC/PAL (monaural)
Waterproof and
Dustproof Rating
JIS waterproof grade 8 and JIS dustproof grade 6 (IP68) Continuous underwater shooting possible for 2 hours at depth of 14 m.
Impact Resistance
Rating
Dimensions
Weight
Accessories
Our drop test (2.0 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method 516.5-Shock testing.
* Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit.
* The camera is not guaranteed to be free of trouble or damages under every condition.
Approx. 125 (W) × 64.5 (H) × 32 (D) mm (approx. 4.9 (W) × 2.5 (H) ×
1.3 (D) inches) (excluding operating or protruding parts)
RICOH WG-4 GPS:
Approx. 216 g (approx. 7.6 oz.) (excluding battery and SD Memory
Card)
Approx. 236 g (approx. 8.3 oz.) (including battery and SD Memory
Card)
RICOH WG-4:
Approx. 209 g (approx. 7.4 oz.) (excluding battery and SD Memory
Card)
Approx. 229 g (approx. 8.1 oz.) (including battery and SD Memory
Card)
Rechargeable lithium-ion battery, Power adapter (AC plug adapter attached), USB cable, Software (CD-ROM), Carabiner strap, Macro stand, Operating Manual, Quick Guide, Utilities Guide for GPS
(RICOH WG-4 GPS only)
8
223
Utilities Guide for GPS
Before Using the GPS
8
About the GPS
GPS means the Global Positioning System. The camera receives signals from multiple GPS satellites to determine its position and the time. This is called “positioning”.
GPS Function on the RICOH WG-4
Embeds location information on an image
Location information such as latitude and longitude of a shooting location is recorded. The shooting location can be displayed on a map by using the provided software.
Saves log files to the SD Memory Card
The camera receives signals from GPS satellites regularly and saves
GPS information to the SD Memory Card as a log file in KML format. The log files can be imported to Google Earth, Google Maps or other programs that can read KML files on a computer and your route can be displayed on their maps.
*Google, Google Earth™ and Google Maps™ are trademarks of Google
Inc.
Corrects the camera clock using GPS information
The camera corrects its clock automatically using the time data received from GPS satellites.
Displays the electronic compass on the screen
The camera has the Electronic Compass function that displays the lens direction at the time of shooting on the screen.
When the camera receives signals from GPS satellites, it indicates the orientation to true north using GPS location information. The location information can be recorded on captured images.
When the camera does not receive any signals or the GPS function is set to off, it indicates the orientation to magnetic north.
1
[Electronic Compass Display in Still Picture Capture Mode] (p.24)
224 This part applies only to the RICOH WG-4 GPS camera
Precautions for Using the GPS
• The GPS function is set to off as the default. To use it, set [GPS On/
Off] to [On].
• GPS satellites always move. Depending on conditions (location, time etc.), positioning may take longer or be impossible.
• To use the GPS function, you must be in an open area, such as out of doors.
• Positioning may be difficult or impossible in the following situations:
- Under water
- Under ground or indoors
- In tunnels
- Among high-rise buildings
- Under elevated or near high-voltage electrical power lines
- In the woods
- Near mobile phones that use the 1.5 GHz band
• When the GPS function is set to on, the camera performs positioning regularly even if it is turned off. Make sure that [GPS On/Off] is set to
[Off] (p.227) before turning off the camera when taking it where using
electronic products is prohibited, such as hospitals or airplanes.
• Positioning may take a few minutes when using the GPS function for the first time, after not positioning for a long while, or after changing the battery.
• The Geodetic system for this camera’s GPS function uses the World
Geodetic System 1984 (WGS 84).
• Using the GPS or recording location information is prohibited in some countries or regions. Consult the appropriate embassy or a travel agent before travelling with a GPS camera.
• Do not carry the camera in a metal container during positioning. If the camera is covered with metal, GPS positioning cannot be achieved.
• In the following situations, the camera cannot obtain GPS information.
It starts positioning again immediately after being out of the following situations:
- When the alarm is set
- When the camera is connected to a computer with a USB cable
- When the camera is connected to an AV device with an AV or HDMI cable
- For a minute after changing the battery
• The GPS function of this camera was designed and manufactured for personal digital camera use only. Do not try to use it as a navigation tool for aircraft, motor vehicles, or people, or for surveying. We will not
8
This part applies only to the RICOH WG-4 GPS camera 225
be held liable for any damages caused by use of this camera for any of these purposes.
Hereby, RICOH IMAGING COMPANY, LTD., declares that this SG761
GPS Module/GYSFDMASA-P2 is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC.
For a full version of the Declaration of Conformity (DoC), please refer to http://www.ricoh-imaging.co.jp/english.
The CE Mark is a Directive conformity mark of the European Union.
8
226 This part applies only to the RICOH WG-4 GPS camera
Using the GPS
Preparation for Using the GPS Function
Set the [GPS On/Off] to [On] for receiving GPS information (latitude, longitude, altitude, date and time etc.).
The GPS function needs to be always activated to embed GPS
information on an image (p.228), record it to the camera as a log (p.230),
save it to the SD Memory Card as a log file (p.232), and correct the
camera clock automatically (p.236).
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS On/
Off].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller
(23) to select [Off] or [On].
GPS
GPS On/Off
Off: Does not receive GPS information
On: Receives GPS information
GPS Logging
GPS Time Sync
Off
On
Off
MENU Cancel
OK OK
• When [GPS On/Off] is set to [On], the camera performs positioning regularly even while the camera power is off, which reduces the battery life.
Estimated battery life: Approx. 60 hr.
(When receiving GPS information continuously with [GPS On/Off] set to [On], [Logging Interval] set to [15sec.], and the camera turned off.)
• Before changing the battery, set [GPS On/Off] to [Off].
8
This part applies only to the RICOH WG-4 GPS camera 227
8
Recording GPS Information on Captured Images
When [GPS On/Off] is set to [On], the received GPS information is recorded onto captured images.
The following icons appear on the display.
GPS information is being received. [GPS On/Off] is set to [On], and signals from GPS satellites are being received.
(White)
GPS information has been received. [GPS On/Off] is set to [On], and signals from GPS satellites have been received.
GPS information has not been received. [GPS On/Off] is set to [On], but signals from GPS satellites have not been received.
(Red)
GPS error. To recover from an error, turn off the camera, remove and then re-insert the battery and turn on the camera again. If is still displayed, the built-in GPS unit may be malfunctioning. Contact your nearest service center.
When [GPS On/Off] is set to [Off], no icon is displayed.
• Only when is displayed on the capture mode screen, GPS information will be recorded onto images.
However, in the following situations GPS information obtained prior to the shooting may be recorded.
• When doing interval shooting
• When the camera fails to determine its position because it has been moved to a location where it cannot receive GPS signals
• When [GPS On/Off] is set to [On], the camera performs positioning regularly even while the camera power is off, which reduces the battery life.
• For a movie, the GPS information obtained at the start of recording is recorded.
• For divided movie files, the GPS information before dividing is displayed.
• For a movie with a title picture, the GPS information of the movie is displayed.
• When shooting in (Interval Shot) mode, GPS information may not be recorded onto images.
• The direction information obtained from the electronic compass measurements is also recorded at the time of shooting when GPS location information can be obtained from GPS satellites.
228 This part applies only to the RICOH WG-4 GPS camera
Displaying the GPS Information Recorded on Captured Image
1
Press the Q button after shooting still pictures or movies.
The camera enters Q mode and an image appears on the display.
2
Press the 4 button until the Info 2 display appears.
If GPS information cannot be obtained, “--” appears on the display.
*The date and time information is displayed in GPS time (the reference time scale of the GPS system). This may be different from the time you have set on the camera.
GPS time
3200
700
180 m ɋ
NN
WW
06: 25: 00
35
139
45' 52"
41' 29"
GPS latitude and longitude
The image on which the GPS information is recorded can be imported to a computer using the supplied software “MediaImpression 3.6.2 LE”
(for Windows) and the location where the image was taken can be displayed on the map.
Select an image in the preview screen and click (location) in the
[Property] area to display the map.
*To display the map, you need to connect your computer to the Internet.
8
This part applies only to the RICOH WG-4 GPS camera 229
8
Recording and Saving a Log
Obtains GPS information at the interval and for the duration you have set and records it to the camera as a log.
The recorded log will be saved to the SD Memory Card as a log file (KML format).
Recording a Log at a Set Interval and Duration
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller
(23) to select [GPS
Logging].
GPS
GPS On/Off
GPS Logging
If this item is grayed out and cannot be selected, set [GPS On/Off] to [On].
GPS Time Sync
MENU
On
Off
4
Press the four-way controller (5).
The [GPS Logging] screen appears.
5
Use the four-way controller
(23) to select [Record log], and press the four-way
controller (5).
GPS Logging
Record log
Save log data
Discard log data
The [Record log] screen appears.
MENU
6
Use the four-way controller (23) to select [Logging
Interval], and press the four-way controller (5).
A pull-down menu appears.
230 This part applies only to the RICOH WG-4 GPS camera
7
Use the four-way controller
(23) to select the logging
interval, and press the 4 button.
Record log
Starts log recording
Start
Logging Interval
Logging Duration
15sec.
30sec.
1min.
MENU Cancel OK OK
8
Use the four-way controller (23) to select [Logging
Duration], and press the four-way controller (5).
9
Use the four-way controller
(23) to select the logging
duration, and press the 4 button.
Record log
Starts log recording
Start
Logging Interval
Logging Duration
15sec.
1hr.
MENU Cancel OK OK
10
Use the four-way controller
(23) to select [Start], and
press the 4 button.
Record log
Starts log recording
Start
Logging Interval
Logging Duration
15sec.
1hr.
MENU OK OK
• After recording a log, the camera cannot record a new log until the
existing log is saved to the SD Memory Card as a log file (p.232) or
• [Record log] can be set only when [GPS On/Off] is set to [On].
• When the battery level indicator is (red), the camera does not record a log.
• (Interval Shot) and (Interval Movie) cannot be selected from the
Capture Mode Palette while recording a log.
8
This part applies only to the RICOH WG-4 GPS camera 231
Stopping Recording a Log
Selecting [Record log] while recording a log displays a confirmation screen. Select
[Stop] and press the 4 button to stop recording the log.
Record log
Stops log recording
Stop
Logging Interval
Logging Duration
15sec.
1hr.
MENU OK OK
8
Saving the Recorded Log
Saves the recorded log to the SD Memory Card as a log file (KML format). The log files are saved in the [GPSLOG] folder under the root directory of the SD Memory Card.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller
(23) to select [GPS
Logging].
GPS
GPS On/Off
GPS Logging
On
GPS Time Sync Off
MENU
4
Press the four-way controller (5).
The [GPS Logging] screen appears.
5
Use the four-way controller (23) to select [Save log
data], and press the 4 button.
A confirmation screen appears.
232 This part applies only to the RICOH WG-4 GPS camera
6
Use the four-way controller
(23) to select [Save], and
press the 4 button.
Saves log data to memory card. Do not remove battery or card until complete
Save
Cancel
OK
7
Press the 4 button.
Returns to the [GPS Logging] screen.
• The log files can be saved on the SD Memory Card only (you cannot save them in the built-in memory).
• Up to 999 log files or to the full capacity of the SD Memory Card can be saved.
• The information saved in log files is latitude, longitude, altitude and date and time.
• The log files cannot be displayed on the camera. Transfer them to a computer and use the software that supports files in the KML format such as Google Earth or Google Maps.
8
This part applies only to the RICOH WG-4 GPS camera 233
Discarding the Recorded Log
Discards the recorded log without saving it to the SD Memory Card.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller
(23) to select [GPS
Logging].
GPS
GPS On/Off
GPS Logging
On
GPS Time Sync Off
MENU
8
4
Press the four-way controller (5).
The [GPS Logging] screen appears.
5
Use the four-way controller (23) to select [Discard log
data], and press the 4 button.
A confirmation screen appears.
6
Use the four-way controller
(23) to select [Discard].
Discards log data without saving it
Discard
Cancel
OK
7
Press the 4 button.
234 This part applies only to the RICOH WG-4 GPS camera
Deleting Logs
If 999 log files are saved on the SD Memory Card, no more log file can be saved on it. Insert a new SD Memory Card or delete logs according to the following procedures to save new ones.
1
Turn the camera on.
[Max # of logs already saved. Delete all existing logs and save current log as new?] message is displayed.
2
Use the four-way controller
(23) to select [Delete All].
Max # of logs already saved.
Delete all existing logs and save current log as new?
Delete All
Cancel
3
Press the 4 button.
All the logs are deleted and the camera returns to capture mode.
If you select [Cancel], you can continue shooting still pictures or movies although you cannot save a log file on the SD Memory Card.
If you start up the camera in playback mode, the camera returns to playback mode after deleting log files.
8
This part applies only to the RICOH WG-4 GPS camera 235
8
Correcting Time Automatically
The camera corrects its clock automatically using the time data received from GPS satellites.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS Time
Sync].
If this item is grayed out and cannot be selected, set [GPS On/Off] to
[On].
4
Press the four-way controller
(5).
GPS
GPS On/Off On
The setting of [World Time] is displayed.
GPS Logging
GPS Time Sync Off
MENU
5
Use the four-way controller
(45) to switch between [On] and [Off].
Destination
New York
04/04/2014
01:25
Time Dif.
DST
+5:00
Syncs camera time to current GPS location
Off
MENU Cancel OK OK
6
Press the 4 button.
Returns to the [GPS] screen.
236 This part applies only to the RICOH WG-4 GPS camera
• [GPS Time Sync] can be set only when [GPS On/Off] is set to [On].
• The GPS Time Sync function does not work in the following situations:
• During movie recording
• During movie playback
• During slideshow
• When (Interval Shot) or (Interval Movie) is set
• When the self-timer is set
Adjusting the Electronic Compass (Calibration)
Calibration is the process of making adjustments to a device in order to obtain accurate information. Always calibrate the electronic compass before using it.
1
Use the four-way controller (23) to select [Electronic
Compass] in the [WSetting] menu.
2
Press the four-way controller (5) twice.
The [Calibration] screen appears.
3
Wrap the strap around your wrist so you do not drop the camera, and then rotate the camera at least 180 degrees each vertically, horizontally, and laterally.
[Complete] appears when the camera is successfully calibrated.
Calibration
8
Rotate camera in each of 3 directions ensuring that each rotation exceeds 180°
4
Press the 4 button.
The screen returns to the [WSetting] menu.
This part applies only to the RICOH WG-4 GPS camera 237
8
• Do not swing or twirl the camera while changing your grip on it.
• If calibration is unsuccessful, face in a different direction and/or slightly change the angle of grip, and then try calibration again.
• The electronic compass may not show the proper direction due to the passing of time, or the change of the camera location. We recommend periodically calibrating the camera.
• Calibration can be done regardless of the GPS signal reception status.
• At locations that are strongly affected by environmental magnetism, it may be difficult to achieve successful calibration, or the electronic compass may not show the proper direction even if calibration is completed. The same may result when the camera is calibrated indoors.
• At locations that are affected by geomagnetism, such as in volcanic regions, it may be difficult to achieve successful calibration, or the electronic compass may not show the proper direction even if calibration is completed.
• If you cannot calibrate the camera within one minute of rotating the camera in three directions, the process will fail and the message
[Cannot process correctly] appears. If this happens, try calibration again.
238 This part applies only to the RICOH WG-4 GPS camera
Warranty Policy
All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.
Procedure During 12-month Warranty Period
Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year. Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
8
239
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from our distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.
8
240
The CE Mark is a Directive conformity mark of the European Union.
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery used in this camera contains perchlorate material, which may require special handling. See www.dtsc.ca.gov/hazardouswaste/perchlorate
8
241
8
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: RICOH IMAGING AMERICAS
CORPORATION
Located at: 633 17 th Street, Suite 2600,
Denver, Colorado 80202, U.S.A.
Phone: 800-877-0155 Fax: 303-790-1131
Declare under sole responsibility that the product identified herein complies with
47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: Digital Camera
Model Number: RICOH WG-4 GPS/RICOH WG-4
Contact person: Customer Service Manager
Date and Place: February, 2014, Colorado
242
Information for Users on Collection and Disposal of Old Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.
Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery
Directive.
For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
8
243
Index
8
Symbols
A Mode
........................................52
Q Mode
.......................................52
Q button
............................... 48 ,
[A Rec. Mode] Menu
[C Movie] Menu
[W Setting] Menu
9 Green Mode
.............................71
i Delete
............................. 125
f /y button
..................................50
y Magnify
...................................135
T Tele
............................................64
W Wide
..........................................64
W/T button
.....................................48
b Auto Picture
.............................68
R Program
...................................68
b Shutter Priority
E User
.......................................73
HDR
........................................68
Handheld Night Snap
C Movie
......................................112
Underwater
............................110
Underwater Movie
Digital Microscope
a Landscape
................................68
b Flower
.......................................69
c Portrait
......................................69
Interval Shot
.............................76
Interval Movie
High Speed Movie
c Time-Lapse Movie
1cm-Macro Movie
c Digital SR
...............................69
Q Surf & Snow
.............................69
R Kids
...........................................69
e Pet
............................................75
\ Sport
.........................................69
A Night Scene
..............................69
B Night Scene Portrait
S Fireworks
..................................69
K Food
..........................................69
Report
......................................69
u Slideshow
..............................132
s Image Rotation
k Small Face Filter
Ink Rubbing Filter
Collage
..................................150
244
P Digital Filter
...........................147
HDR Filter
.............................149
E Original Frame
[ Movie Edit
..............................158
Z Red-eye Edit
n Resize
....................................144
o Cropping
................................145
p Image Copy
............................161
Z Protect
.................................139
r DPOF
......................................163
Start-up Screen
Numerics
1cm Macro
................................84
6-Image Display/
12-Image Display
A
AC adapter
....................................37
AE Metering
...................................93
Alarm
...........................................170
Auto + Red-eye c (Flash)
Auto Bracketing a
Auto Image Rotation
AUTO ISO Range
Auto Macro
....................................87
Auto Power Off
............................182
Auto F (White Balance)
Auto , (Flash)
...............................83
Autofocus area
..............................86
Autofocus while recording movies
.........................................117
Automatic Tracking
AV cable
......................................142
B
B&W/Sepia filter
Basic mode
....................................71
Battery level indicator
Blink Detection
Brightness filter
............................147
Brightness Level
Built-in memory
............................161
Burst Shooting
...............................79
C
Calendar display
Camera Location
Camera shake
...............................65
Capture Mode Palette
Changing volume
Charging a battery
Checking the memory card
Clock Display
...............................187
Collage
........................................150
Color emphasis filter
Color filter
....................................147
Connecting the camera to an AV device
...............................141
Connecting to a TV
Continuous Shooting
Contrast
.......................................106
Conversion lens
...........................108
Copy
............................................161
Cropping
......................................145
D
Date Adjustment
Date Imprint
.................................106
Default settings
............................212
Delete all
......................................138
Delete i
............................. 125
Digital Filter
..................................147
Digital Microscope Mode
Digital zoom
...................................66
Display brightness
Display language
Display Options
...........................189
Dividing movies
...........................159
DPOF settings
.............................163
D-Range Setting
............................96
Drive Mode
,
,
Dustproof
.........................................8
E
Electronic Level
EV Compensation
Extract color filter
Eye-Fi
................................. 181
F
Face Detection
File Name
....................................177
Filters
...........................................147
Fish-eye filter
...............................147
Flash Mode
....................................83
Flash Off a (Flash)
Flash On b (Flash)
Flash On + Red-eye d (Flash)
Flower
............................................69
Fluorescent light
............................92
Focus Assist
..................................87
Focus Mode
...................................84
Focusing
........................................84
Folder display
..............................128
Folder Name
................................175
Food
..............................................69
Format
.........................................167
Four-way controller
Frame rate
...................................115
G
Green button X
Green button setting
Green Mode
...................................71
Guide Display
H
HDMI
...........................................180
HDR Filter
....................................149
High Contrast filter
Highlight Correction
Histogram
......................................28
Hometown
...................................172
I
Image Copy
.................................161
Image Rotation
............................134
Image storage capacity
Image Tone
...................................88
Infinity s
.......................................84
Initial setting
...................................43
Ink Rubbing Filter
Installing a battery
Installing the software
Instant Review
Interval Movie
..............................118
Interval Shot
..................................76
IQ Enhancer
................................107
L
Landscape
.....................................68
Language setting
LED Lighting
Lens adapter
................................108
M
Macintosh
....................................195
Macro q
........................................84
8
245
8
Macro Light
..................................107
Magnify y
...................................135
Manual Focus \
Manual K (White Balance)
MediaImpression
Memory
........................................123
3 button
......................... 49 ,
Miniature filter
..............................147
Movie button
Movie Edit
....................................158
Movie Menu
Movie SR (Movie Shake Reduction)
Function
.......................................116
MSC
.............................................191
Multi-segment metering L
N
Number of pixels
............................89
O
4 button
.............................. 49
Operating the menus
Optical zoom
................................117
Original Frame
.............................154
P
Pan Focus 3
...............................84
Pet Mode
.......................................75
Photo processing lab
Pixel Mapping
..............................184
Playback
............................. 125
Playback Mode Palette
Playing back movies
Power button
,
Power Saving
..............................182
Press fully
(shutter release button)
Press halfway
(shutter release button)
Pressure Sensor
Product registration
Protect Z
..................................139
PTP
..............................................191
Q
Quality Level
..................................90
Quick Zoom
.................................183
R
Rec. Mode Menu
Recorded Pixels
246
Recording movies
Red-eye Edit
................................153
Red-eye reduction cd (Flash)
Regarding waterproof, dustproof, and shockproof design
Remote control unit
Report
............................................69
Reset
...........................................186
Reset values
................................190
Resetting settings
Resize
..........................................144
Retro filter
....................................147
Rotating
.......................................134
S
Saturation
....................................105
Saving as still picture (movie)
Saving pictures by date
Saving settings
............................123
SD Memory Card
Select Time
..................................173
Self-portrait Assist
Self-timer g
...................................77
Sensitivity
......................................94
Setting Menu
Shadow Correction
Shake Reduction
Sharpness
...................................105
Shooting information
Shooting mode
..............................67
Shutter Priority Mode
Shutter release button
,
Slideshow
....................................132
Small Face Filter
Soft filter
......................................147
Sound settings
.............................168
Sound types
.................................168
Specifications
..............................219
Standard =
.................................84
Starburst filter
..............................147
Starting-up in playback mode
Start-up screen
............................185
Startup Shortcut
...........................186
Sub-display indicator
System requirements
T
Text Size
......................................174
Text Stamp
..................................157
Title picture of movie
Tone Adjustment
Toy Camera filter
U
Underwater Mode
Underwater Movie Mode
Underwater shooting
USB Connection
User Mode
.....................................73
V
Video output format
W
Waterproof
...................................110
White Balance
...............................91
Wind Suppression
Windows
......................................194
Wireless LAN
...............................202
World Time
..................................172
Z
Zoom W/T
......................................64
8
247
Memo
Thank you for purchasing this RICOH WG-4 GPS/RICOH WG-4 Digital Camera.
Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
This operating manual applies to RICOH WG-4 GPS/RICOH WG-4.
The illustrations used in this manual are those of RICOH WG-4 GPS.
Regarding copyrights
Images taken with the RICOH WG-4 GPS/RICOH WG-4 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC logo is a trademark of SD-3C, LLC.
• Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
• ArcSoft
®
, and its logo are either the registered trademark or trademark of
ArcSoft Inc. in the United States and/or other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
• Eye-Fi, the Eye-Fi logo, and Eye-Fi connected are trademarks of Eye-Fi, Inc.
• Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and/or other countries.
• AMD, AMD Athlon, and ATI Radeon are trademarks or registered trademarks of Advanced Micro Devices, Inc.
• NVIDIA and GeForce are trademarks and/or registered trademarks of NVIDIA
Corporation in the U.S. and/or other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Memo
Thank you for purchasing this RICOH WG-4 GPS/RICOH WG-4 Digital Camera.
Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
This operating manual applies to RICOH WG-4 GPS/RICOH WG-4.
The illustrations used in this manual are those of RICOH WG-4 GPS.
Regarding copyrights
Images taken with the RICOH WG-4 GPS/RICOH WG-4 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC logo is a trademark of SD-3C, LLC.
• Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
• ArcSoft
®
, and its logo are either the registered trademark or trademark of
ArcSoft Inc. in the United States and/or other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
• Eye-Fi, the Eye-Fi logo, and Eye-Fi connected are trademarks of Eye-Fi, Inc.
• Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and/or other countries.
• AMD, AMD Athlon, and ATI Radeon are trademarks or registered trademarks of Advanced Micro Devices, Inc.
• NVIDIA and GeForce are trademarks and/or registered trademarks of NVIDIA
Corporation in the U.S. and/or other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Memo
RICOH IMAGING COMPANY, LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE
S.A.S
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(http://www.ricoh-imaging.fr)
RICOH IMAGING
DEUTSCHLAND GmbH
Am Kaiserkai 1, 20457 Hamburg, GERMANY
(http://www.ricoh-imaging.de)
RICOH IMAGING UK LTD. PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.ricoh-imaging.co.uk)
RICOH IMAGING
AMERICAS CORPORATION
633 17th Street, Suite 2600, Denver, Colorado 80202,
U.S.A.
(http://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA
INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.ricoh-imaging.ca)
RICOH IMAGING CHINA
CO., LTD.
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032, CHINA
(http://www.ricoh-imaging.com.cn) http://www.ricoh-imaging.co.jp/english
Getting Started 1
Digital Camera
RICOH WG-4 GPS
RICOH WG-4
Operating Manual
Common Operations 2
Taking Pictures 3
Playing Back and
Deleting Images
4
Editing and Printing 5
Settings 6
Connecting to a
Computer
7
Appendix 8
• Specifications and external dimensions are subject to change without notice.
OPWG40101/EN Copyright © RICOH IMAGING COMPANY, LTD. 2014
FOM 01.02.2014 Printed in Europe
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
डाउनलोड
सार्वजनिक लिंक अपडेट किया गया
आपकी चैट का सार्वजनिक लिंक अपडेट कर दिया गया है. You may view and manage your chat links after registration here.
दस्तावेज़ सार्वजनिक लिंक
विज्ञापन
मुख्य विशेषताएं
Compact camera 16.79 MP CMOS Black, Yellow
Image sensor size: 1/2.3"
Optical zoom: 4x Digital zoom: 7.2x
TTL
ISO sensitivity (min): 125 ISO sensitivity (max): 6400 Fastest camera shutter speed: 1/2000 s Slowest camera shutter speed: 4 s ± 2EV (1/2EV step)
Video recording 1920 x 1080 pixels Full HD
Built-in microphone Voice recording HDMI
Lithium-Ion (Li-Ion)