Netis System E1

Netis System E1 is a wireless N range extender that boosts your existing Wi-Fi signal, eliminating dead zones and extending coverage to hard-to-reach areas. With simple setup options, you can use either WPS or the web management page to configure the extender. It features a smart signal indicator that helps you find the best location for optimal coverage. The E1 supports various security protocols, including WEP, WPA, and WPA2, ensuring a secure connection for your devices. Additionally, you can customize the extended network name and password for added security and personalization.

PDF

Document

 netis Wireless N Range Extender
Quick Installation Guide
Model No. E1
netis Wireless N Range Extender Quick Installation Guide
1.Package Contents
Oi
E1 Quick Installation Guide
2.Hardware Information
Light On
Light Flashing
The E1 is powered on
Data is transmitting or WPS is
pairing with remote device
Light Off The E1 is powered off
WPS/Default Button
WPS: Press the button for 1 ~2 seconds
Default: Press and hold the button until the light is flashing,
the extender will be restored to factory defaults
Note: Different power plug is provided for different region. Here we just take
US version for example.
3.Extender Setup
You can setup E1 in two ways: pressing WPS Button or via Web
Management Page.
netis Wireless N Range Extender Quick Installation Guide
3.1 Hardware Connection
Internet
Main Router
=&gt;...
Smartphone
Computer El Tablet
1) Please make sure that your main router can connect to the Internet
successfully.
2) Plug E1 to a standard electrical socket.
Note: Please place the E1 closely to your main router when you setup
extender. Also after you are successfully connected, you can move
your E1 to other areas.
3.1.1 Extender setup via WPS Button (Particularly recommended)
Note: Please make sure that the main router is with WPS Button, and the
function is enabled. If you cannot find WPS function, please turn to
“3.1.2 Extender setup via Web Management Page”.
netis Wireless N Range Extender Quick Installation Guide
Step 1: Press the WPS Button on your main router.
TI &gt; u]
Step 2: Press WPS Button on E1 for 1-2 seconds.
netis
&copy; wes
Step 3: You are successfully connected!
x netis
Note: Once the setting is finished, the extended Wi-Fi will use the
same network name and password as your main router.
netis Wireless N Range Extender Quick Installation Guide
3.1.2 Extender setup via Web Management Page
Step 1: Search and connect to the E1 network “netis” with your computer or
mobile terminal device.
Networks
Airplane mode
Off
alll WIFI-409
all WIFI-411
ill WiFI-410
ETT
| netis
Other people might be able to see
info you send over this networl
| Connect automatically
(Take Win8 as an example)
Step 2: Open your browser and type “http://netisext.cc” in the address field to
visit E1's web management page.
IS http://netisext.cc |
Note: If the login page cannot pop up, please check your computer is set to
obtain IP address automatically.
Step 3: Select your network of your main router { For example: WIFI-410) .
netis Model No.:E1 | Firmware Version:v1.2:28101]
Select the Wireless Network to Extend
WIFI-410 CI
WIFI-412 &gt;
WIFI-408 &gt;
WIFI-411 &gt;
WIFI-409 ==
&copy; IQ &copy;
Http:// www.netis-systems.com | E-mail: [email protected]
netis Wireless N Range Extender Quick Installation Guide
Step 4: Type in wireless password of the main router and click “Connect”
to setup your Wi-Fi Extender network.
&reg;
&deg;))
Wireless Network: WIFI-410
| Password |
Step 5: You are successfully connected!
)
Successfully Connected!
&gt;New Wi-Fi: WIFI-410
&gt;New Password: Password
&gt;To reconfigure the Extender, please login with:
http://netisext.cc
Note: In default, E1 works under Roaming mode, so the extended Wi-Fi
will use the same network name and password as your main router.
If you want to set different network name and password, please click
on “Advanced” -&gt; &quot;Extended Wi-Fi&quot; to turn off the Roaming Mode.
And then you can set the customized name and password for the
extended Wi-Fi.
Tip 1:
Default Login Address: http://netisext.cc
Default SSID: netis
Tip 2:
You can click on “Advanced” button on the top for further settings.
5
netis Wireless N Range Extender Quick Installation Guide
4. Troubleshooting
Q How do I restore my Extender configuration to its default settings?
With the Extender powered on, press and hold the button until the light is
flashing, the Extender configuration will be restored to factory defaults.
Q What can | do if | failed to extend the wireless range by “WPS Button”?
1) Check to verify the hardware connections are correct. Please refer to the
“3.1.1 Extender setup via WPS Button” &gt; “3.1 Hardware Connection”.
2) Make sure that the WPS feature is enabled on your main router.
3) Refer to “3.1.2 Extender setup via Web Management Page&quot; to configuration
via Web Management Page.
Appendix: FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operationis subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Technical Support:
USA/ Canada
Toll Free: +1 866 71 network (+1 866 716 3896)
E-mail: [email protected]
Other Regions:
E-mail: [email protected]
NETIS SYSTEMS CO., LTD.
www.netis-systems.com
MADE IN CHINA
">

Hello! I am an AI chatbot specifically trained to assist you with the Netis System E1 English. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!