Patricia I.
How do I set the time?
Press and hold button A until the hour flashes. Release A and use button B to set the hour. Press A. The minutes will flash. Release A and use button B to set the minutes. Press A to finish.
Below you will find brief information for espresso machine Lavazza Time EP 1800. The Lavazza Time EP 1800 espresso machine is designed for home use. It can be used to make espresso, cappuccino and other coffee beverages. It can be easily be cleaned and is relatively compact, making it ideal for both small kitchens and tight spaces. It has a number of features, including an energy saving mode, a cup warming tray, a steam arm and a water tank with a maximum capacity of 2,7 liters of water.
Advertisement
Advertisement
Advertisement
Energy saving mode
Cup warming tray
Steam arm
Water tank with 2,7 liters capacity
Free pour and pre-set coffee dispensing modes
To program a fixed serving of coffee, press and hold down one of the two coffee dispenser buttons for at least 3 seconds. The on light flashes. At this point release the button. Once you have reached the desired amount of coffee interrupt the flow by pressing the same button as before.
Turn the steam arm so it faces away from the machine, remove the tip by pulling downwards, and wash it in a dishwasher or with water. Clean the steam arm with a wet cloth and replace the tip. Blast some steam through the steam arm for a few seconds after use to avoid the build-up of scale and possible blockages.
If the water tank runs out, the machine will stop dispensing coffee. It will also stop dispensing steam, and the pump will be very noisy. Fill the water tank with fresh drinkable water and the machine will start working again.
How do I set the time?
Press and hold button A until the hour flashes. Release A and use button B to set the hour. Press A. The minutes will flash. Release A and use button B to set the minutes. Press A to finish.
How to set the time?
Press and hold down button A for a few seconds. The display indicating the hour begins to flash. Release button A and press button B repeatedly to set the time. Press button A. The display indicating the minutes begins to flash. Release button A and press button B repeatedly to set the minutes. Press button A to terminate the operation.