Kingston Technology ValueRAM Memory 256MB 400MHz DDR2 CL3 SODIMM Datasheet

Memory Module Specification
KVR400D2S3/256
256MB 32M x 64-Bit DDR2-400
CL3 200-Pin SODIMM
DESCRIPTION:
This document describes ValueRAM's 32M x 64-bit (256MB) DDR2-400 CL3 SDRAM
(Synchronous DRAM) memory module. The components on this module include eight
32M x 8-bit (8M x 8-bit x 4 Bank) DDR2-400 SDRAM in FBGA packages. This 200-pin
SODIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=3
Row Cycle Time (tRC)
Refresh to Active/Refresh Command Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
5ns (min.) / 8ns (max.)
55ns (min.)
75ns
40ns (min.) / 70,000ns (max.)
+1.8V (+/- .1V)
1.368 W (operating)
94 V - 0
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30.00mm.
(units = millimeters)
Figure 1: KVR400D2S3/256 200-Pin SODIMM
Document No. VALUERAM0368-001.A00
12/14/04