advertisement
PRODUCT SPECIFICATION
video transmission solutions
RK5000PS-3U/RK5000-3U Rack Mounts
CHASSIS FOR FIBER OPTIC AND UTP MODULES
Product Features
• 3 Rack Units (RU) High
• Mount in Standard 19-Inch Rack
• Hot Swappable Internal Power Supply (RK5000PS-3U)
• Optional External Power Supply for Fiber Optic Modules
• Optional Blank Modules
The RK5000PS-3U chassis has 12 empty slots that can hold singlewidth or double-width fiber optic modules or single-width UTP modules. The modules and the internal power supply are 3 RU high.
The internal power supply powers all modules and can be replaced easily if it fails. The chassis is designed to mount into an EIA-standard,
19-inch rack.
The RK5000-3U chassis has 14 empty slots. It does not include an internal power supply. A fully populated RK5000-3U chassis can be powered with the optional EPS5000-120 external power supply. The chassis is designed to mount into an EIA-standard, 19-inch rack.
Optional single-width blank modules (RK5001B-3U) and double-width blank modules (RK5002B-3U) can be inserted into empty module slots.
Optional External Power Supply
The EPS5000-120 external power supply can be used with fiber optic modules only. It is 1 RU high and has dual 120 W power supplies that slide into a tray. The external power supply can be mounted into a
19-inch, EIA-standard rack. The EPS5000-120 can be used in the following ways:
• Provide power to one fully populated RK5000-3U
• Provide power to two fully populated RK5000-3U (refer to
EXAMPLE 1)
• Provide redundant power to one fully populated RK5000PS-3U
• Provide redundant power to two fully populated RK5000PS-3U
(refer to EXAMPLE 2)
The relay output connector on the back of the EPS5000-120 is tied to the alarm LED. The alarm LED turns red when there is an alarm condition, such as the loss of the optical signal or the video signal.
The relay will close or open, depending on whether it is set to normally closed (N.C.) or normally open (N.O.). The 6-pin power connector allows you to connect an over-molded cable (supplied) from the EPS5000-120 to either the RK5000-3U or the RK5000PS-3U.
The power fail LED turns red when there is a problem with the power supply that can cause it to fail. If one of the power supplies fails, the blue Pelco badge will turn off.
RK5000-3U (TOP)
RK5000PS-3U (BOTTOM)
EPS5000-120
EPS5000-120
RK5000-3U
EXAMPLE 1
EPS5000-120
RK5000PS-3U
EXAMPLE 2
RK5000-3U
RK5000PS-3U
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1957 / REVISED 3-10-10
TECHNICAL SPECIFICATIONS
MODELS
RK5000PS-3U
RK5000-3U
Rack mount chassis for up to 12 fiber optic modules or 12 UTP modules; internal power supply
Rack mount chassis for up to 14 fiber optic modules or 14 UTP modules; external power supply required
COMPATIBILITY CROSS-REFERENCE
Module Size
Single-width
Double-width
Triple-width
Quad-width
Fiber and
Ethernet Modules
FT8101A/FR8101A Series
FT8104/FR8104 Series
FT8301A/FR8301A Series
FR8302A-2 Series
FT8304/FR8304 Series
FT85011A/FR85011A Series
FX82012-2 Series
FT82041-1/FR82041-1 Series
FT82011-1/FR82011-1 Series
FX82011-2 Series
FT8308/FR8308 Series
FT85041/FR85041 Series
FX82051-2 Series
FX82052-2 Series
FX82052-4 Series
FT85081/FR85081 Series
FT8316/FR8316 Series
UTP Modules
TW4004P
–
–
–
RK5000PS-3U
Electrical
Input Voltage
Input Current
Output Voltage
Output Current
Fuse Rating
Redundant Capability
100 to 240 VAC
1.0 A
12 VDC
10 A
1.6 A
Yes with optional EPS5000-120 power supply
Mechanical
Number of Slots
Module Orientation
12
Vertical
General
Rack Units
Construction
3
Aluminum
Finish Black
Operating Temperature 32° to 122°F (0° to 50°C)
Operating Humidity
Storage Humidity
80% maximum relative humidity, noncondensing
95% maximum relative humidity, noncondensing
Dimensions
Mounting
Unit Weight
Shipping Weight
8.85" D x 18.99" W x 5.22" H
(22.48 x 48.23 x 13.26 cm)
Fits 19-inch EIA-standard rack
5.19 lb (2.35 kg), chassis only
8.01 lb (3.63 kg), with power supply
25.53 lb (11.58 kg), fully populated
9 lb (4.08 kg) approximate
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120 www.pelco.com
RK5000-3U
Mechanical
Number of Slots
Module Orientation
General
Rack Units
Construction
Finish
Dimensions
Mounting
Unit Weight
Shipping Weight
EPS5000-120
Electrical
Input Voltage
Input Current
Output Voltage
Output Current
Fuse Rating
Relay Rating
General
Rack Units
Construction
Finish
Operating Temperature
Operating Humidity
Dimensions
Mounting
Unit Weight
Shipping Weight
14
Vertical
3
Aluminum
Black
8.85" D x 18.99" W x 5.22" H
(22.48 x 48.23 x 13.26 cm)
Fits 19-inch EIA-standard rack
5.19 lb (2.35 kg), chassis only
25.63 lb (11.63 kg), fully populated
6 lb (2.71 kg) approximate
100 to 240 VAC
3.2 A total
12 VDC per power supply
10 A per power supply
1.6 A per power supply
1 A, 40 VDC
1
Aluminum
Black
32° to 122°F (0° to 50°C)
80% maximum relative humidity, noncondensing
12.00" D x 17.40" W x 1.73" H
(30.48 x 44.20 x 4.39 cm)
Fits 19-inch EIA-standard rack
7.25 lb (3.29 kg)
9 lb (4.08 kg) approximate
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
OPTIONAL ACCESSORIES
RK5001B-3U Single-width blank module
RK5002B-3U
EPS5000-120
Double-width blank module
External rack power supply for fiber optic modules; dual 120 W power supplies
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
All product names and services identified throughout this document are trademarks or registered trademarks of their respective companies. The absence of a trademark or registered trademark from this document does not constitute a waiver of intellectual property rights.
Product specifications and availability subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement