FANTEC MR-2535DUAL
Mobile rack for 6.35cm (2.5") + 8.89cm (3.5") SATA HDD
Manufacturer Item-No.: 1871
2.5" & 3.5"
HDD/SSD
FANTEC MR-2535DUAL
The FANTEC MR-2535DUAL mobile rack fits into any 13.34cm (5.25") drive bay. The carrier free design and hot plug provides an easy and fast installation as well as exchange of 6.35 cm (2.5") and 8.89cm
(3.5") SATA hard drives or SSDs. Two blue status LEDs on the front shows hard disk access. The bay flaps can be closed with the supplied accessories. The internal 40mm fan ensures optimal HDD cooling.
1
2
3
4 5 6
1
2
3
4
6
Carrier free design
Blue status LEDs on the front
Each one drive bay for a 3.5" & a 2.5" hard disk or SSD
2x SATA connector (rear)
Power (rear)
Internal 40mm fan
FANTEC GmbH • Billwerder Billdeich 605B • 21033 Hamburg Deutschland • Tel. +49 (0) - 73 09 2 83 • Fax +49 (0) - 72 69 28 98 http://www.fantec.de • www.fantec-forum.de • [email protected]
Technical changes reserved.
FANTEC MR-2535DUAL
Mobile rack for 6.35cm (2.5") + 8.89cm (3.5") SATA HDD
Manufacturer Item-No.: 1871
Specifications
Equipment
• Mobile rack for 13.35cm (5.25") drive bay
• For 6.35cm (2.5") + 8.89cm (3.5") SATA
HDD or SSD
• 2x SATA connector
Data transfer rate up to 6Gbps
• Blue status LEDs (front)
• Carrier free design
Connectors
• 2x SATA connector (rear)
• 1x power (reaer)
Operating system
• Microsoft Windows 2000, XP, Vista, 7
• MacOS 10.3 and above
• Linux
Package contents
• 1x screw set
• 1x key set
• Manual
Dimensions (item)
• 146 x 181 x 41mm (W x D x H)
• Netto weight ~0.525kg apiece
Logistical data
• Dimensions retailbox
211 x 52 x 170mm - (W x D x H)
• Gross weight with retailbox
0.720kg each retailbox
• Dimensions carton
470 x 310 x 410mm - (W x D x H)
• Carton
20 pieces each carton
• Total weight carton
15.2kg
• EAN
4250273418712
FANTEC GmbH • Billwerder Billdeich 605B • 21033 Hamburg Deutschland • Tel. +49 (0) - 73 09 2 83 • Fax +49 (0) - 72 69 28 98 http://www.fantec.de • www.fantec-forum.de • [email protected]
Technical changes reserved.